mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-26 03:09:34 +03:00
9681de4657
26 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Tino Reichardt
|
1d3ba0bf01
|
Replace dead opensolaris.org license link
The commit replaces all findings of the link: http://www.opensolaris.org/os/licensing with this one: https://opensource.org/licenses/CDDL-1.0 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Closes #13619 |
||
Rich Ercolani
|
8e739b2c9f
|
Annotated dprintf as printf-like
ZFS loves using %llu for uint64_t, but that requires a cast to not be noisy - which is even done in many, though not all, places. Also a couple places used %u for uint64_t, which were promoted to %llu. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rich Ercolani <rincebrain@gmail.com> Closes #12233 |
||
Matthew Ahrens
|
aa755b3549
|
Set aside a metaslab for ZIL blocks
Mixing ZIL and normal allocations has several problems: 1. The ZIL allocations are allocated, written to disk, and then a few seconds later freed. This leaves behind holes (free segments) where the ZIL blocks used to be, which increases fragmentation, which negatively impacts performance. 2. When under moderate load, ZIL allocations are of 128KB. If the pool is fairly fragmented, there may not be many free chunks of that size. This causes ZFS to load more metaslabs to locate free segments of 128KB or more. The loading happens synchronously (from zil_commit()), and can take around a second even if the metaslab's spacemap is cached in the ARC. All concurrent synchronous operations on this filesystem must wait while the metaslab is loading. This can cause a significant performance impact. 3. If the pool is very fragmented, there may be zero free chunks of 128KB or more. In this case, the ZIL falls back to txg_wait_synced(), which has an enormous performance impact. These problems can be eliminated by using a dedicated log device ("slog"), even one with the same performance characteristics as the normal devices. This change sets aside one metaslab from each top-level vdev that is preferentially used for ZIL allocations (vdev_log_mg, spa_embedded_log_class). From an allocation perspective, this is similar to having a dedicated log device, and it eliminates the above-mentioned performance problems. Log (ZIL) blocks can be allocated from the following locations. Each one is tried in order until the allocation succeeds: 1. dedicated log vdevs, aka "slog" (spa_log_class) 2. embedded slog metaslabs (spa_embedded_log_class) 3. other metaslabs in normal vdevs (spa_normal_class) The space required for the embedded slog metaslabs is usually between 0.5% and 1.0% of the pool, and comes out of the existing 3.2% of "slop" space that is not available for user data. On an all-ssd system with 4TB storage, 87% fragmentation, 60% capacity, and recordsize=8k, testing shows a ~50% performance increase on random 8k sync writes. On even more fragmented systems (which hit problem #3 above and call txg_wait_synced()), the performance improvement can be arbitrarily large (>100x). Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Don Brady <don.brady@delphix.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11389 |
||
Matthew Macy
|
68a1b1589a |
Remove sdt.h
It's mostly a noop on ZoL and it conflicts with platforms that support dtrace. Remove this header to resolve the conflict. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9497 |
||
Serapheim Dimitropoulos
|
93e28d661e |
Log Spacemap Project
= Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent |
||
Brian Behlendorf
|
1b939560be
|
Add TRIM support
UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598 |
||
Serapheim Dimitropoulos
|
1a759200e5 |
Document guidelines for usage of zfs_dbgmsg
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8299 |
||
Tom Caputi
|
ab4c009e3d |
Fix dbgmsg printing in ztest and zdb
This patch resolves a problem where the -G option in both zdb and ztest would cause the code to call __dprintf() to print zfs_dbgmsg output. This function was not properly wired to add messages to the dbgmsg log as it is in userspace and so the messages were simply dropped. This patch also tries to add some degree of distinction to dprintf() (which now prints directly to stdout) and zfs_dbgmsg() (which adds messages to an internal list that can be dumped with zfs_dbgmsg_print()). In addition, this patch corrects an issue where ztest used a global variable to decide whether to dump the dbgmsg buffer on a crash. This did not work because ztest spins up more instances of itself using execv(), which did not copy the global variable to the new process. The option has been moved to the ztest_shared_opts_t which already exists for interprocess communication. This patch also changes zfs_dbgmsg_print() to use write() calls instead of printf() so that it will not fail when used in a signal handler. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8010 |
||
John Gallagher
|
d12614521a |
Fixes for procfs files backed by linked lists
There are some issues with the way the seq_file interface is implemented for kstats backed by linked lists (zfs_dbgmsgs and certain per-pool debugging info): * We don't account for the fact that seq_file sometimes visits a node multiple times, which results in missing messages when read through procfs. * We don't keep separate state for each reader of a file, so concurrent readers will receive incorrect results. * We don't account for the fact that entries may have been removed from the list between read syscalls, so reading from these files in procfs can cause the system to crash. This change fixes these issues and adds procfs_list, a wrapper around a linked list which abstracts away the details of implementing the seq_file interface for a list and exposing the contents of the list through procfs. Reviewed by: Don Brady <don.brady@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: John Gallagher <john.gallagher@delphix.com> External-issue: LX-1211 Closes #7819 |
||
Matthew Ahrens
|
964c2d69a9 |
OpenZFS 9236 - nuke spa_dbgmsg
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least, metaslab_condense() should call zfs_dbgmsg because it's important and rare enough to always log. It's possible that the message in zio_dva_allocate() would be too high-frequency for zfs_dbgmsg. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> Patch Notes: * Removed ZFS_DEBUG_SPA from zfs-module-parameters.5 OpenZFS-issue: https://www.illumos.org/issues/9236 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cfaba7f668 Closes #7467 |
||
Matthew Ahrens
|
a1d477c24c |
OpenZFS 7614, 9064 - zfs device evacuation/removal
OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900 |
||
Matthew Ahrens
|
2fd92c3d6c |
enable zfs_dbgmsg() by default, without dprintf()
zfs_dbgmsg() should record a message by default. As a general principal, these messages shouldn't be too verbose. Furthermore, the amount of memory used is limited to 4MB (by default). dprintf() should only record a message if this is a debug build, and ZFS_DEBUG_DPRINTF is set in zfs_flags. This flag is not set by default (even on debug builds). These messages are extremely verbose, and sometimes nontrivial to compute. SET_ERROR() should only record a message if ZFS_DEBUG_SET_ERROR is set in zfs_flags. This flag is not set by default (even on debug builds). This brings our behavior in line with illumos. Note that the message format is unchanged (including file, line, and function, even though these are not recorded on illumos). Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #7314 |
||
Ned Bass
|
8740cf4a2f |
Add line info and SET_ERROR() to ZFS debug log
Redefine the SET_ERROR macro in terms of __dprintf() so the error return codes get logged as both tracepoint events (if tracepoints are enabled) and as ZFS debug log entries. This also allows us to use the same definition of SET_ERROR() in kernel and user space. Define a new debug flag ZFS_DEBUG_SET_ERROR=512 that may be bitwise or'd into zfs_flags. Setting this flag enables both dprintf() and SET_ERROR() messages in the debug log. That is, setting ZFS_DEBUG_SET_ERROR and ZFS_DEBUG_DPRINTF|ZFS_DEBUG_SET_ERROR are equivalent (this was done for sake of simplicity). Leaving ZFS_DEBUG_SET_ERROR unset suppresses the SET_ERROR() messages which helps avoid cluttering up the logs. To enable SET_ERROR() logging, run: echo 1 > /sys/module/zfs/parameters/zfs_dbgmsg_enable echo 512 > /sys/module/zfs/parameters/zfs_flags Remove the zfs_set_error_class tracepoints event class since SET_ERROR() now uses __dprintf(). This sacrifices a bit of granularity when selecting individual tracepoint events to enable but it makes the code simpler. Include file, function, and line number information in debug log entries. The information is now added to the message buffer in __dprintf() and as a result the zfs_dprintf_class tracepoints event class was changed from a 4 parameter interface to a single parameter. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #6400 |
||
George Melikov
|
fa603f8233 |
OpenZFS 7277 - zdb should be able to print zfs_dbgmsg's
Porting notes: - 'zfs_dbgmsg_print()' reintroduced to userspace. Authored by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com> Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru> OpenZFS-issue: https://www.illumos.org/issues/7277 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29bdd2f Closes #5684 |
||
Don Brady
|
4e21fd060a |
OpenZFS 7303 - dynamic metaslab selection
This change introduces a new weighting algorithm to improve metaslab selection. The new weighting algorithm relies on the SPACEMAP_HISTOGRAM feature. As a result, the metaslab weight now encodes the type of weighting algorithm used (size-based vs segment-based). Porting Notes: The metaslab allocation tracing code is conditionally removed on linux (dependent on mdb debugger). Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Pavel Zakharov pavel.zakharov@delphix.com Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Don Brady <don.brady@intel.com> OpenZFS-issue: https://www.illumos.org/issues/7303 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d5190931bd Closes #5404 |
||
Brian Behlendorf
|
3b36f8319d |
Add dbgmsg kstat
Internally ZFS keeps a small log to facilitate debugging. By default the log is disabled, to enable it set zfs_dbgmsg_enable=1. The contents of the log can be accessed by reading the /proc/spl/kstat/zfs/dbgmsg file. Writing 0 to this proc file clears the log. $ echo 1 >/sys/module/zfs/parameters/zfs_dbgmsg_enable $ echo 0 >/proc/spl/kstat/zfs/dbgmsg $ zpool import tank $ cat /proc/spl/kstat/zfs/dbgmsg 1 0 0x01 -1 0 2492357525542 2525836565501 timestamp message 1441141408 spa=tank async request task=1 1441141408 txg 70 open pool version 5000; software version 5000/5; ... 1441141409 spa=tank async request task=32 1441141409 txg 72 import pool version 5000; software version 5000/5; ... 1441141414 command: lt-zpool import tank Note the zfs_dbgmsg() and dprintf() functions are both now mapped to the same log. As mentioned above the kernel debug log can be accessed though the /proc/spl/kstat/zfs/dbgmsg kstat. For user space consumers log messages are immediately written to stdout after applying the ZFS_DEBUG environment variable. $ ZFS_DEBUG=on ./cmd/ztest/ztest -V Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #3728 |
||
Prakash Surya
|
0b39b9f96f |
Swap DTRACE_PROBE* with Linux tracepoints
This patch leverages Linux tracepoints from within the ZFS on Linux code base. It also refactors the debug code to bring it back in sync with Illumos. The information exported via tracepoints can be used for a variety of reasons (e.g. debugging, tuning, general exploration/understanding, etc). It is advantageous to use Linux tracepoints as the mechanism to export this kind of information (as opposed to something else) for a number of reasons: * A number of external tools can make use of our tracepoints "automatically" (e.g. perf, systemtap) * Tracepoints are designed to be extremely cheap when disabled * It's one of the "accepted" ways to export this kind of information; many other kernel subsystems use tracepoints too. Unfortunately, though, there are a few caveats as well: * Linux tracepoints appear to only be available to GPL licensed modules due to the way certain kernel functions are exported. Thus, to actually make use of the tracepoints introduced by this patch, one might have to patch and re-compile the kernel; exporting the necessary functions to non-GPL modules. * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux tracepoints are not available for unsigned kernel modules (tracepoints will get disabled due to the module's 'F' taint). Thus, one either has to sign the zfs kernel module prior to loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or newer. Assuming the above two requirements are satisfied, lets look at an example of how this patch can be used and what information it exposes (all commands run as 'root'): # list all zfs tracepoints available $ ls /sys/kernel/debug/tracing/events/zfs enable filter zfs_arc__delete zfs_arc__evict zfs_arc__hit zfs_arc__miss zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write zfs_new_state__mfu zfs_new_state__mru # enable all zfs tracepoints, clear the tracepoint ring buffer $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable $ echo 0 > /sys/kernel/debug/tracing/trace # import zpool called 'tank', inspect tracepoint data (each line was # truncated, they're too long for a commit message otherwise) $ zpool import tank $ cat /sys/kernel/debug/tracing/trace | head -n35 # tracer: nop # # entries-in-buffer/entries-written: 1219/1219 #P:8 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr... z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr... z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr... z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr... z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr... z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr... z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr... z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ... To highlight the kind of detailed information that is being exported using this infrastructure, I've taken the first tracepoint line from the output above and reformatted it such that it fits in 80 columns: lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr { dva 0x1:0x40082 birth 15491 cksum0 0x163edbff3a flags 0x640 datacnt 1 type 1 size 2048 spa 3133524293419867460 state_type 0 access 0 mru_hits 0 mru_ghost_hits 0 mfu_hits 0 mfu_ghost_hits 0 l2_hits 0 refcount 1 } bp { dva0 0x1:0x40082 dva1 0x1:0x3000e5 dva2 0x1:0x5a006e cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00 lsize 2048 } zb { objset 0 object 0 level -1 blkid 0 } For the specific tracepoint shown here, 'zfs_arc__miss', data is exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!). This kind of precise and detailed information can be extremely valuable when trying to answer certain kinds of questions. For anybody unfamiliar but looking to build on this, I found the XFS source code along with the following three web links to be extremely helpful: * http://lwn.net/Articles/379903/ * http://lwn.net/Articles/381064/ * http://lwn.net/Articles/383362/ I should also node the more "boring" aspects of this patch: * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to support a sixth paramter. This parameter is used to populate the contents of the new conftest.h file. If no sixth parameter is provided, conftest.h will be empty. * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced. This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro, except it has support for a fifth option that is then passed as the sixth parameter to ZFS_LINUX_COMPILE_IFELSE. These autoconf changes were needed to test the availability of the Linux tracepoint macros. Due to the odd nature of the Linux tracepoint macro API, a separate ".h" must be created (the path and filename is used internally by the kernel's define_trace.h file). * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This is to determine if we can safely enable the Linux tracepoint functionality. We need to selectively disable the tracepoint code due to the kernel exporting certain functions as GPL only. Without this check, the build process will fail at link time. In addition, the SET_ERROR macro was modified into a tracepoint as well. To do this, the 'sdt.h' file was moved into the 'include/sys' directory and now contains a userspace portion and a kernel space portion. The dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as well. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> |
||
George Wilson
|
f3a7f6610f |
Illumos 4976-4984 - metaslab improvements
4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595 |
||
Matthew Ahrens
|
fbeddd60b7 |
Illumos 4390 - I/O errors can corrupt space map when deleting fs/vol
4390 i/o errors when deleting filesystem/zvol can lead to space map corruption Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Dan McDonald <danmcd@omniti.com> Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/4390 https://github.com/illumos/illumos-gate/commit/7fd05ac Porting notes: Previous stack-reduction efforts in traverse_visitb() caused a fair number of un-mergable pieces of code. This patch should reduce its stack footprint a bit more. The new local bptree_entry_phys_t in bptree_add() is dynamically-allocated using kmem_zalloc() for the purpose of stack reduction. The new global zfs_free_leak_on_eio has been defined as an integer rather than a boolean_t as was the case with the related zfs_recover global. Also, zfs_free_leak_on_eio's definition has been inserted into zfs_debug.c for consistency with the existing definition of zfs_recover. Illumos placed it in spa_misc.c. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2545 |
||
Michael Kjorling
|
d1d7e2689d |
cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821 |
||
George Wilson
|
5d1f7fb647 |
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962
3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8 Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context. |
||
Richard Yao
|
495b25a91a |
Add missing code to zfs_debug.{c,h}
This is required to make Illumos 3962 merge. Signed-off-by: Richard Yao <ryao@gentoo.org> |
||
Matthew Ahrens
|
13fe019870 |
Illumos #3464
3464 zfs synctask code needs restructuring Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/3464 illumos/illumos-gate@3b2aab1880 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1495 |
||
Brian Behlendorf
|
4b787d75c8 |
Cleanly support debug packages
Allow a source rpm to be rebuilt with debugging enabled. This avoids the need to have to manually modify the spec file. By default debugging is still largely disabled. To enable specific debugging features use the following options with rpmbuild. '--with debug' - Enables ASSERTs # For example: $ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm Additionally, ZFS_CONFIG has been added to zfs_config.h for packages which build against these headers. This is critical to ensure both zfs and the dependant package are using the same prototype and structure definitions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> |
||
Brian Behlendorf
|
d7e398ce1a |
Cleanup ZFS debug infrastructure
Historically the internal zfs debug infrastructure has been scattered throughout the code. Since we expect to start making more use of this code this patch performs some cleanup. * Consolidate the zfs debug infrastructure in the zfs_debug.[ch] files. This includes moving the zfs_flags and zfs_recover variables, plus moving the zfs_panic_recover() function. * Remove the existing unused functionality in zfs_debug.c and replace it with code which correctly utilized the spl logging infrastructure. * Remove the __dprintf() function from zfs_ioctl.c. This is dead code, the dprintf() functionality in the kernel relies on the spl log support. * Remove dprintf() from hdr_recl(). This wasn't particularly useful and was missing the required format specifier anyway. * Subsequent patches should unify the dprintf() and zfs_dbgmsg() functions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> |
||
Brian Behlendorf
|
6283f55ea1 |
Support custom build directories and move includes
One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense. |