Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17473
This allows to rewrite content of specified file(s) as-is without
modifications, but at a different location, compression, checksum,
dedup, copies and other parameter values. It is faster than read
plus write, since it does not require data copying to user-space.
It is also faster for sync=always datasets, since without data
modification it does not require ZIL writing. Also since it is
protected by normal range range locks, it can be done under any
other load. Also it does not affect file's modification time or
other properties.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Missed in #17073, probably because that PR was branched before #17001
was landed and never rebased.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The redundant_metadata setting in ZFS allows users to trade resilience
for performance and space savings. This applies to all data and metadata
blocks in zfs, with one exception: gang blocks. Gang blocks currently
just take the copies property of the IO being ganged and, if it's 1,
sets it to 2. This means that we always make at least two copies of a
gang header, which is good for resilience. However, if the users care
more about performance than resilience, their gang blocks will be even
more of a penalty than usual.
We add logic to calculate the number of gang headers copies directly,
and store it as a separate IO property. This is stored in the IO
properties and not calculated when we decide to gang because by that
point we may not have easy access to the relevant information about what
kind of block is being stored. We also check the redundant_metadata
property when doing so, and use that to decide whether to store an extra
copy of the gang headers, compared to the underlying blocks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update the default FICLONE and FICLONERANGE ioctl behavior to wait
on dirty blocks. While this does remove some control from the
application, in practice ZFS is better positioned to the optimial
thing and immediately force a TXG sync.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17455
The `scn_min_txg` can now be used not only with resilver. Instead
of checking `scn_min_txg` to determine whether it’s a resilver or
a scrub, simply check which function is defined. Thanks to this
change, a scrub_finish event is generated when performing a scrub
from the saved txg.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Closes#17432
This PR condenses the FDT dedup log syncing into a single sync
pass. This reduces the overhead of modifying indirect blocks for the
dedup table multiple times per txg. In addition, changes were made to
the formula for how much to sync per txg. We now also consider the
backlog we have to clear, to prevent it from growing too large, or
remaining large on an idle system.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Authored-by: Don Brady <don.brady@klarasystems.com>
Authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17038
These are only required to support these ioctls on Linux <4.5. Since
4.18 is our cutoff, we don't need this code anymore.
Also removing related test things that will never match again.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17308
Fairly coarse, but if it returns while the pool suspends, it must be
with an error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
The io_uring interface is available as a Technology Preview.
Details: https://access.redhat.com/solutions/4723221
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17397
It was reported that channel programs' zfs.get_prop doesn't work for
dataset properties encryption and encryptionroot.
They are handled in get_special_prop due to the need to call
dsl_dataset_crypt_stats to load those dsl props.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Co-authored-by: Graham Christensen <graham@grahamc.com>
Closes#17280
This test covers a bug fixed by commit ea74cde: performing an
incremental non-raw send from an encrypted filesystem followed by
exporting the pool. Before that commit, exporting the sending pool
in this scenario would trigger a panic:
VERIFY(avl_is_empty(&sk->sk_dsl_keys)) failed
PANIC at dsl_crypt.c:353:spa_keystore_fini()
Call Trace:
spl_dumpstack+0x29/0x2f [spl]
spl_panic+0xd1/0xe9 [spl]
spl_assert.constprop.0+0x1a/0x30 [zfs]
spa_keystore_fini+0xc2/0xf0 [zfs]
spa_deactivate+0x25f/0x610 [zfs]
spa_evict_all+0xf4/0x200 [zfs]
spa_fini+0x13/0x140 [zfs]
zfs_kmod_fini+0x72/0xc0 [zfs]
openzfs_fini_os+0x13/0x3a [zfs]
openzfs_fini+0x9/0x6b8 [zfs]
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#17366
The old code would compare all the test group names to work out some
sort of common path, but it didn't appear to work consistently,
sometimes placing output in a top-level dir, other times in one or more
subdirs. (I confess, I do not quite understand what it's supposed to
do).
This is a very simple rework that simply looks at all the test group
paths, removes common leading components, and uses the remainder as the
output directory. This should work because groups paths are unique, and
means we get a output dir tree of roughly the same shape as the test
groups in the runfiles and the test source dirs themselves.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: @ImAwsumm
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17167
(cherry picked from commit 9aae14a14a)
After more CI runs and code reading after #17259 I've found that
online starts resilver via async mechanism, which does not provide
wait primitives at this time. Restore some delays to restore CI
until this is properly fixed.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
(cherry picked from commit f85c96edf7)
`S_IFMT` is declared in `sys/stat.h`, but we cannot include this header
because it redeclares the `statx` function with different argument
types. Therefore, we define `S_IFMT` ourselves, in the same way as the
other definitions.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Closes#17293Closes#17294
(cherry picked from commit 634c172ee8)
zpool_status_003 and zpool_status_004_pos use 'dd' to trigger a read of
a file without specifying 'of=/dev/null'. This spams the ZTS logs
with ~20MB of garbage data. This commit adds 'of=/dev/null'.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
(cherry picked from commit a6cca8a7da)
It's possible for two spares to get attached to a single failed vdev.
This happens when you have a failed disk that is spared, and then you
replace the failed disk with a new disk, but during the resilver
the new disk fails, and ZED kicks in a spare for the failed new
disk. This commit checks for that condition and disallows it.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #16547Closes: #17231
(cherry picked from commit f40ab9e399)
Decrease the RESILVER_MIN_TIME_MS variable from 50 to 20.
So the test, which expects two 2 resilver starts will see them.
Logfile of the seen failures before this fix:
log: NOTE: expected 2 resilver start(s) after offline/online, found 1
log: expected 2 resilver start(s) after offline/online, found 1
The test time decreases also from around 00:42 to 00:24 seconds.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16822Closes#17279
(cherry picked from commit 3b18877269)
This change goes through and quotes variables where appropriate to
avoid issues with incorrect splitting. The performance tests ran into
an issue with $SUDO_COMMAND splitting incorrectly because it was not
quoted. This change fixes that issue and hopefully gets ahead of any
other similar problems.
Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Aleksandr Liber <aleksandr.liber@perforce.com>
Closes#17235
(cherry picked from commit aa46cc9812)
Sometimes it fails unable to see any injected write errors.
I guess writing 25KB of zeroes might be not enough to trigger
errors with probability set to 10%. Lets try to write more.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17270
(cherry picked from commit d947b9aedd)
Those tests are write-mostly at the nested pool. Considering we have
3 more layers of caching underneath, we can hint ZFS how to use the
memory better by setting primarycache=metadata.
While there, add missing zpool sync after rm in checkpoint_capacity
before we could potentially see the freed space, would not there be
a pool checkpoint.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 1ef706c4ad)
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes: #17267
(cherry picked from commit 38c3a8be83)
Replace `sleep 15` with `zpool wait`, which should take much less
than the 15 seconds. And considering it is called 16 times, this
should save us up to 4 minutes total.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes: #17257
(cherry picked from commit 8f2c2dea3c)
- Kill workload first for faster cleanup.
- Use `zpool wait` for resilver instead of `sleep`.
- Remove irrelevant workload from `online_offline_003_neg`.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes: #17259
(cherry picked from commit cb49e7701f)
The test writes 1M of 1KB blocks, which may produce up to 1GB of
dirty data. On top of that ashift=12 likely produces additional
4GB of ZIO buffers during sync process. On top of that we likely
need some page cache since the pool reside on files. And finally
we need to cache the DDT. Not surprising that the test regularly
ends up in OOMs, possibly depending on TXG size variations.
Also replace fio with pretty strange parameter set with a set of
dd writes and TXG commits, just as we neeed here.
While here, remove compression. It has nothing to do here, but
waste CI CPU time.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 1d8f625233)
Various tools will display draid vdev names with parameters embedded in
them, but would not accept them as valid vdev names when looking them
up, making it difficult to build pipelines involving draid vdevs.
This commit makes it so that if a full draid name is offered for match,
it gets truncated at the first ':' character.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 131df3bbf2)
It seems `fio` in `ddt_dedup_vdev_limit` overwhelms the system
with the amount of dirty data caused by DDT updates within one
TXG due to tiny 1KB records used, while I see no reason for this
test to extend the TXGs beyond default.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: @ImAwsumm
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 21850f519b)
Since embedded blocks introduction 11 years ago, their writing was
blocked if dedup is enabled. After searching through the modern
code I see no reason for this restriction to exist. Same time
embedded blocks are dramatically cheaper. Even regular write of
so small blocks would likely be cheaper than deduplication, even
if the last is successful, not mentioning otherwise.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17113
(cherry picked from commit 09f4dd06c3)
Fix build errors on Fedora 42 like:
module/zcommon/zfs_valstr.c:193:16: error: initializer-string for
array of 'char' truncates NUL terminator but destination lacks
'nonstring' attribute (3 chars into 2 available)
The arrays in zpool_vdev_os.c and zfs_valstr.c don't need to be
NULL terminated, but we do so to make GCC happy.
Closes: #17242
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
cmd/zinject/zinject.c:
- use PRIu64 when printing uint64_t
tests/zfs-tests/cmd/clonefile.c:
- use an unsigned long long to store result from strtoull()
- use %jd for printing off_t, %zu for size_t, %zd for ssize_t
tests/zfs-tests/tests/functional/vdev_disk/page_alignment.c:
- use %zx to print size_t
Discovered when compiling on FreeBSD i386.
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: @ImAwsumm
There was a recent CI ZTS test failure on FreeBSD 14 for the
dio_read_verify test case. The failure reported there was no ARC reads
while the buffer wes being manipulated. All checksum verify errors for
Direct I/O reads are rerouted through the ARC, so there should be ARC
reads accounted for. In order to help debug any future failures of this
test case, the order of checks has been changed. First there is a check
for DIO verify failures for the reads and then ARC read counts are
checked.
This PR also contains general cleanup of the comments in the test
script.
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
This commit adds tests that ensure that the ICP crypto_encrypt() and
crypto_decrypt() produce the correct results for all implementations
available on this platform.
The actual ZTS scripts are simple drivers for the crypto_test program in
it's "correctness" mode. This mode takes a file full of test vectors
(inputs and expected outputs), runs them, and checks that the results
are expected. It will run the tests for each implementation of the
algorithm provided by the ICP.
The test vectors are taken from Project Wycheproof, which provides a
huge number of tests, including exercising many edge cases and common
implementation mistakes. These tests are provided are JSON files, so a
program is included here to convert them into a simpler line-based
format for crypto_test to consume.
crypto_test also has a "performance" mode, which will run simple
benchmarks against all implementations provded by the ICP and output
them for comparison. This is not used by ZTS, but is available to assist
with development of new implementations of the underlying primitives.
Thanks-to: Joel Low <joel@joelsplace.sg>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Confirming that clearing pool and vdev userprops produce the same
result: an empty value, with default source.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16887
Force receive (zfs receive -F) can rollback or destroy snapshots and
file systems that do not exist on the sending side (see zfs-receive man
page). This means an user having the receive permission can effectively
delete data on receiving side, even if such user does not have explicit
rollback or destroy permissions.
This patch adds the receive:append permission, which only permits
limited, non-forced receive. Behavior for users with full receive
permission is not changed in any way.
Fixes#16943
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#17015
This statx(2) mask returns the alignment restrictions for O_DIRECT
access on the given file.
We're expected to return both memory and IO alignment. For memory, it's
always PAGE_SIZE. For IO, we return the current block size for the file,
which is the required alignment for an arbitrary block, and for the
first block we'll fall back to the ARC when necessary, so it should
always work.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16972
The new Fast Dedup feature has a lot of moving parts, and only some of
them have tests. We have some tests for prefetch and quota, and a
generic ZAP shrinking test, but we don't have anything for the pruning
command or specific to DDT zap shrinking. Here we add a couple small new
tests for zpool ddtprune and DDT-specific ZAP shrinking.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17049
Most of these are trying to use TMPDIR to put their work files somewhere
sensible. Now that we've set up correctly, they can all just use mktemp
to do the job.
In a couple of places cleaning up temp files wasn't being done
correctly, which has been fixed.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
In all cases, rely on mktemp itself to make the best decision about
where to place the file or directory. In all cases, that decision will
be $TMPDIR, which we have set globally.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Many tests use mktemp to create temporary files and dirs, which will
usually put them in /tmp unless instructed otherwise. This had led to
many tests trying to give mktemp a useful temp path in ad-hoc ways, and
others just using it directly without knowing they're potentially
leaving stuff lying around.
So we set TMPDIR to FILEDIR, which makes the simplest uses of mktemp put
things in the wanted work dir.
Included here is a hack to get TMPDIR into the test. If a test has to be
run as a different user (most of them), it is run through sudo. ld.so
from glibc will not pass TMPDIR to a setuid program, so instead we
re-set TMPDIR after sudo before running the target command.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The default outputdir had a timestamp appended in TestRun.__init__, and
then the timestamp was unconditionally applied again after the runfile
had been loaded, assuming that an outputdir would be set in the runfile
too. If the runfile didn't have an outputdir, then the outputdir would
get a second timestamp appended.
Further, if test groups or individual tests themselves specificed an
outputdir, those would be set on their config, but would not get a
timestamp appended. It's not entirely clear if that's wrong or not, but
it is certainly not consistent with the rest.
To clean all this up, change things to append a timestamp to a received
outputdir (from arg or runfile) before setting it in any TestRun,
TestGroup or Test object.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The config file value overrides any set by the operator, making it quite
difficult to put the test output elsewhere. The default is
/var/tmp/test_results (via BASEDIR in test-runner) so this shouldn't
change anything for the default case.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The operator can override TEST_BASE_DIR by setting its source var
FILEDIR through zfs-tests.sh -d. There were a handful of cases where
this was not honoured.
By default FILEDIR (and so TEST_BASE_DIR) is /var/tmp, so there should
be no functional change if the operator does nothing.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Adding fields to zinject_record_t unexpectedly extended zfs_cmd_t,
preventing some things working properly with 2.3.1 userspace tools
against 2.3.0 kernel module.
This reverts commit fabdd502f4.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Don't try to get mg of hole vdev in removal
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17080
