Before allowing the ZED to mark a vdev as REMOVED due to a
hotplug event confirm that it is non-responsive with probe.
Any device which can be successfully probed should be left
ONLINE to prevent a healthy pool from being incorrectly
SUSPENDED. This may occur for at least the following two
scenarios.
1) Drive expansion (zpool online -e) in VMware environments.
If, during the partition resize operation, a partition is
removed and re-created then udev will send a removed event.
2) Re-scanning the namespaces of an NVMe device (nvme ns-rescan)
may result in a udev remove and add event being delivered.
Finally, update the ZED to only kick in a spare when the
removal was successful.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14859Closes#14861
Added a flag '-e' in zpool scrub to scrub only blocks in error log. A
user can pause, resume and cancel the error scrub by passing additional
command line arguments -p -s just like a regular scrub. This involves
adding a new flag, creating new libzfs interfaces, a new ioctl, and the
actual iteration and read-issuing logic. Error scrubbing is executed in
multiple txg to make sure pool performance is not affected.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: TulsiJain tulsi.jain@delphix.com
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#8995Closes#12355
zpool initialize functions well for touching every free byte...once.
But if we want to do it again, we're currently out of luck.
So let's add zpool initialize -u to clear it.
Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12451Closes#14873
8eae2d214c caused Coverity to begin
complaining about "Improper use of negative value" in two places in
spa_sync_props() because Coverity correctly inferred from `prop ==
ZPOOL_PROP_INVAL` that prop could be -1 while both zpool_prop_to_name()
and zpool_prop_get_type() use it an array index, which is undefined
behavior.
Assuming that the system does not panic from an attempt to read invalid
memory, the case statement for ZPOOL_PROP_INVAL will ensure that only
user properties will reach this code when prop is ZPOOL_PROP_INVAL, such
that execution will continue safely. However, if we are unlucky enough
to read invalid memory, then the system will panic.
This issue predates the patch that caused coverity to begin complaining.
Thankfully, our userland tools do not pass nonsense to us, so this bug
should not be triggered unless a future userland tool attempts to set a
property that we do not understand.
Reported-by: Coverity (CID-1561129)
Reported-by: Coverity (CID-1561130)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14860
6839ec6f10 placed code in
spa_remove_healed_errors() that uses a pointer after the kmem_free()
call that frees it.
Reported-by: Coverity (CID-1562375)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14860
There is no sense to keep that memory allocated during the flush.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14855
Should not cause functional changes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14854
The dmu_buf_is_dirty() call doesn't make sense here for two reasons:
1. txg is 0 for unassigned tx, so it was a no-op.
2. It is equivalent of checking if we have dirty records and we are doing
this few lines earlier.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14825
I don't know an easy way to shrink down dbuf size, so just deny block cloning
into dbufs that don't match our BP's size.
This fixes the following situation:
1. Create a small file, eg. 1kB of random bytes. Its dbuf will be 1kB.
2. Create a larger file, eg. 2kB of random bytes. Its dbuf will be 2kB.
3. Truncate the large file to 0. Its dbuf will remain 2kB.
4. Clone the small file into the large file. Small file's BP lsize is
1kB, but the large file's dbuf is 2kB.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14825
Reimplement some of the block cloning vs dbuf logic, mostly to fix
situation where we clone a block and in the same transaction group
we want to partially overwrite the clone.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14825
At least for RAIDZ zio_shrink() does not reduce zio size, but reduced
wsz in that case likely results in writing uninitialized memory.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14853
Protect zvol_cdev_read with zv_suspend_lock to prevent concurrent
release of the dnode, avoiding panic when a snapshot is rolled back
in parallel during ongoing zvol read operation.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14839
Provides an interface which callers can use to declare a write when
the exact starting offset in not yet known. Since the full range
being updated is not available only the first L0 block at the
provided offset will be prefetched.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14819
l2arc_evict() performs the adjustment of the size of buffers to be
written on L2ARC unnecessarily. l2arc_write_size() is called right
before l2arc_evict() and performs those adjustments.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14828
We only need to know if ZIO has any parent there. We do not care if
it has more than one, but use of zio_unique_parent() == NULL asserts
that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14823
In case check_filesystem() does not error out and does not report
an error, remove that error block from error lists and logs
without requiring a scrub. This can happen when the original file and
all snapshots/clones referencing it have been removed.
Otherwise zpool status will still report that "Permanent errors have
been detected..." without actually reporting any of them.
To implement this change the functions introduced in corrective
receive were modified to take into account the head_errlog feature.
Before this change:
=============================
pool: test
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
config:
NAME STATE READ WRITE CKSUM
test ONLINE 0 0 0
/home/user/vdev_a ONLINE 0 0 2
errors: Permanent errors have been detected in the following files:
=============================
After this change:
=============================
pool: test
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are
unaffected.
action: Determine if the device needs to be replaced, and clear the
errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P
config:
NAME STATE READ WRITE CKSUM
test ONLINE 0 0 0
/home/user/vdev_a ONLINE 0 0 2
errors: No known data errors
=============================
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14813
For the head_errlog feature use dsl_dataset_hold_obj_flags() instead of
dsl_dataset_hold_obj() in order to enable access to the encryption keys
(if loaded). This enables reporting of errors in encrypted filesystems
which are not mounted but have their keys loaded.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14837
If a block pointer is corrupted (but the block containing it checksums
correctly, e.g. due to a bug that overwrites random memory), we can
often detect it before the block is read, with the `zfs_blkptr_verify()`
function, which is used in `arc_read()`, `zio_free()`, etc.
However, such corruption is not typically recoverable. To recover from
it we would need to detect the memory error before the block pointer is
written to disk.
This PR verifies BP's that are contained in indirect blocks and dnodes
before they are written to disk, in `dbuf_write_ready()`. This way,
we'll get a panic before the on-disk data is corrupted. This will help
us to diagnose what's causing the corruption, as well as being much
easier to recover from.
To minimize performance impact, only checks that can be done without
holding the spa_config_lock are performed.
Additionally, when corruption is detected, the raw words of the block
pointer are logged. (Note that `dprintf_bp()` is a no-op by default,
but if enabled it is not safe to use with invalid block pointers.)
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#14817
- There is no reason to assert that added gang is not empty. It
may be weird to add an empty gang, but it is legal.
- When moving chain list from the added gang clear its size, or it
will trigger assertion in abd_verify() when that gang is freed.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14816
On kernel module unload, free all zfsdev state structures, except for
zfsdev_state_listhead, which is statically allocated.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14824
spa_import() relies on a pool config fetched by spa_try_import() for
spare/cache devices. Import flags are not passed to spa_tryimport(),
which makes it return early due to a missing log device and missing
retrieving the cache device and spare eventually. Passing
ZFS_IMPORT_MISSING_LOG to spa_tryimport() makes it fetch the correct
configuration regardless of the missing log device.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14794
Integrate check_clones() into check_filesystem() and implement a list
instead of iterating recursively over the clones, thus eliminating the
risk of a stack overflow.
Also use kmem_zalloc() to allocate large structures in
process_error_log() reducing its stack size from ~700 to ~128 bytes.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14744
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14806
This is a temporary measure until a better fix is sorted out.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Closes#14785Closes#14808
Currently when layering the ABD buffer of each split block on top of
an indirect vdev's ZIO ABD we don't specify the split block's ABD.
This results in those ABDs being incorrectly sized by inheriting
the size of their parent ABD which is larger than what each split
block needs.
The above behavior isn't causing any bugs currently but can lead
to unexpected ABD sizes for people analyzing and/or working on
the ZIO codepath. This patch fixes this behavior by properly setting
the ABD size for split block ZIOs.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#14804
FreeBSD/powerpc64 is all ELFv2 since FreeBSD 13, even big endian. The
existing sha256 and sha512 asm code assumes that BE is all ELFv1, and LE
is ELFv2. Minor changes to add ELFv2 in the BE side gets this working
correctly on FreeBSD with latest OpenZFS import.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Justin Hibbits <chmeeedalf@gmail.com>
Closes#14779
TX_COMMIT has no on-disk representation and does not produce any more
dirty data. It should not wait for anything, and even just skipping
the checks if not waiting gives improvement noticeable in profiler.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14798
The x18 register isn't useable within FreeBSD kernel space, so we
have to fix the BLAKE3 aarch64 assembly for not using it.
The source files are here: https://github.com/mcmilk/BLAKE3-tests
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#14728
Gang ABDs without childred are legal, and they do have zero size.
For other ABD types zero size doesn't have much sense and likely
not working correctly now.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14795
This reverts commit 4c856fb333 to
resolve a newly introduced deadlock which in practice in more
disruptive that the issue this commit intended to address.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14775Closes#14790
Add loongarch64 definitions & lua module setjmp asm
LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Han Gao <gaohan@uniontech.com>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Closes#13422
It became illegal to not have them as of
5f6df177758b9dff88e4b6069aeb2359e8b0c493 ("vfs: validate that vop
vectors provide all or none fplookup vops") upstream.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#14788
Not complete, but already shaves on some locking.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Closes#14723
API contract requires VOPs to handle EXDEV internally, worst case by
falling back to the generic copy routine. This broke with the recent
changes.
While here whack custom loop to lock 2 vnodes with vn_lock_pair, which
provides the same functionality internally. write start/finish around
it plays no role so got eliminated.
One difference is that vn_lock_pair always takes an exclusive lock on
both vnodes. I did not patch around it because current code takes an
exclusive lock on the target vnode. zfs supports shared-locking for
writes, so this serializes different calls to the routine as is, despite
range locking inside. At the same time you may notice the source vnode
can get some traffic if only shared-locked, thus once more this goes
the safer route of exclusive-locking. Note this should be patched to
use shared-locking for both once the feature is considered stable.
Technically the switch to vn_lock_pair should be a separate change, but
it would only introduce churn immediately whacked by the rest of the
patch.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Closes#14723
Noticed while attempting to change FreeBSD's boolean_t into an actual
bool: in include/sys/zfs_ioctl_impl.h, zfs_vfs_held() is declared to
return a boolean_t, but in module/os/freebsd/zfs/zfs_ioctl_os.c it is
defined to return an int. Make the definition match the declaration.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#14776
Usage:
zpool set org.freebsd:comment="this is my pool" poolname
Tests are based on zfs_set's user property tests.
Also stop truncating property values at MAXNAMELEN, use ZFS_MAXPROPLEN.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Beckhoff Automation GmbH & Co. KG.
Sponsored-by: Klara Inc.
Closes#11680
Building with Clang on Linux generates a warning that err could be
uninitialized if mnt_ns is a NULL pointer. However, mnt_ns should never
be NULL, so there is no need to put this behind an if statement. Taking
it outside of the if statement means that the possibility of err being
uninitialized goes from being always zero in a way that the compiler
could not realize to a way that is always zero in a way that the
compiler can realize.
Sponsored-By: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Closes#14738
And add it to the AVZ, this is not backwards compatible with older pools
due to an assertion in spa_sync() that verifies the number of ZAPs of
all vdevs matches the number of ZAPs in the AVZ.
Granted, the assertion only applies to #DEBUG builds - still, a feature
flag is introduced to avoid the assertion, com.klarasystems:vdev_zaps_v2
Notably, this allows to get/set properties on the root vdev:
% zpool set user:prop=value <pool> root-0
Before this commit, it was already possible to get/set properties on
top-level vdevs with the syntax <type>-<vdev_id> (e.g. mirror-0):
% zpool set user:prop=value <pool> mirror-0
This syntax also applies to the root vdev as it is is of type 'root'
with a vdev_id of 0, root-0. The keyword 'root' as an alias for
'root-0'.
The following tests have been added:
- zpool get all properties from root vdev
- zpool set a property on root vdev
- verify root vdev ZAP is created
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes#14405
At our site we have seen cases when multi-modifier protection is enabled
(multihost=on) on our pool and the pool gets suspended due to a single
disk that is failing and responding very slowly. Our pools have 90 disks
in them and we expect disks to fail. The current version of MMP requires
that we wait for other writers before moving on. When a disk is
responding very slowly, we observed that waiting here was bad enough to
cause the pool to suspend. This change allows the MMP thread to bypass
waiting for other threads and reduces the chances the pool gets
suspended.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Herb Wartens <hawartens@gmail.com>
Closes#14659
Spare vdev should detach from the pool when a disk is reinserted.
However, spare detachment depends on the completion of resilvering,
and if resilver does not schedule, the spare vdev keeps attached to
the pool until the next resilvering. When a zfs pool contains
several disks (25+ mirror), resilvering does not always happen when
a disk is reinserted. In this patch, spare vdev is manually detached
from the pool when resilvering does not occur and it has been tested
on both Linux and FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14722
This reverts commit 4b3133e671.
Users identified this commit as a possible source of data
corruption:
https://github.com/openzfs/zfs/issues/14753
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #14753Closes#14761
The zfs_log_clone_range() function is never called from the
zfs_clone_range_replay() function, so I assumed it is safe to assert
that zil_replaying() is never TRUE here. It turns out zil_replaying()
also returns TRUE when the sync property is set to disabled.
Fix the problem by just returning if zil_replaying() returns TRUE.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported by: Florian Smeets
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14758
Don't overwrite blk_phys_birth, as for embedded blocks it is part of
the payload.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Issue #13392Closes#14739
Fix the code in case of missing snapshots. Previously the check was in
a conditional that would be executed if the filesystem had snapshots.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14735
The ereport.fs.zfs.checksum event contains histograms of the bits that
were wrongly set or cleared according to their bit position in a 64-bit
word. So the maximum value that any histogram bucket could have would
be 64. But ZFS currently uses a uint32_t to hold each bucket. As a
result, the event report is full of needless zeroes.
Change the bucket size to uint8_t, stripping 768 needless zeros from
each event.
Original event format:
```
class=ereport.fs.zfs.checksum ena=639460469834258433 pool=testpool.1933 pool_guid=4979719877084416563 pool_state=0 pool_context=0 pool_failmode=wait vdev_guid=4136721804819128578 vdev_type=file vdev_path=/tmp/kyua.1TxP3A/2/work/file1.1933 vdev_ashift=9 vdev_complete_ts=609837019678 vdev_delta_ts=33450 vdev_read_errors=0 vdev_write_errors=0 vdev_cksum_errors=20 vdev_delays=0 parent_guid=2751977006639883417 parent_type=raidz vdev_spare_guids= zio_err=0 zio_flags=1048752 zio_stage=4194304 zio_pipeline=65011712 zio_delay=0 zio_timestamp=0 zio_delta=0 zio_priority=4 zio_offset=702976 zio_size=1024 zio_objset=24 zio_object=0 zio_level=3 zio_blkid=0 bad_ranges=0000000000000400 bad_ranges_min_gap=8 bad_range_sets=0000079e bad_range_clears=00000854 bad_set_histogram=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 bad_cleared_histogram=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 time=00000016806457270000000323406839 eid=458
```
New format:
```
class=ereport.fs.zfs.checksum ena=96599319807790081 pool=testpool.1933 pool_guid=1236902063710799041 pool_state=0 pool_context=0 pool_failmode=wait vdev_guid=2774253874431514999 vdev_type=file vdev_path=/tmp/kyua.6Temlq/2/work/file1.1933 vdev_ashift=9 vdev_complete_ts=92124283803 vdev_delta_ts=46670 vdev_read_errors=0 vdev_write_errors=0 vdev_cksum_errors=20 vdev_delays=0 parent_guid=8090931855087882905 parent_type=raidz vdev_spare_guids= zio_err=0 zio_flags=1048752 zio_stage=4194304 zio_pipeline=65011712 zio_delay=0 zio_timestamp=0 zio_delta=0 zio_priority=4 zio_offset=1028608 zio_size=512 zio_objset=0 zio_object=0 zio_level=0 zio_blkid=4 bad_ranges=0000000000000200 bad_ranges_min_gap=8 bad_range_sets=0000061f bad_range_clears=000001f4 bad_set_histogram=1719161c1c1c101618171a151a1a19161e1c171d1816161c191f1a18192117191c131d171b1613151a171419161a1b1319101b14171b18151e191a1b141a1c17 bad_cleared_histogram=06090a0808070a0b020609060506090a01090a050a0a0509070609080d050d0607080d060507080c04070807070a0608020c080c080908040808090a05090a07 time=00000016806477050000000604157480 eid=62
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Alan Somers <asomers@FreeBSD.org>
Sponsored-by: Axcient
Closes#14716
Linux kernel 6.3 changed a bunch of APIs to use the dedicated idmap
type for mounts (struct mnt_idmap), we need to detect these changes
and make zfs work with the new APIs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#14682
sha256-armv8.S and sha512-armv8.S need the same treatment as the sse
bits; removal of -mgeneral-regs-only from flags.
This fixes errors about requiring NEON, which is a difference in clang
vs. gcc treatment of -mgeneral-regs-only being specified on asm files.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes#14715
Run kmem_free() after zap_cursor_fini().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14702
Add missing machine/md_var.h to spl/sys/simd_aarch64.h and
spl/sys/simd_arm.h
In spl/sys/simd_x86.h, PCB_FPUNOSAVE exists only on amd64, use PCB_NPXNOSAVE
on i386
In FreeBSD sys/elf_common.h redefines AT_UID and AT_GID on FreeBSD, we need
a hack in vnode.h similar to Linux. sys/simd.h needs to be included early.
In zfs_freebsd_copy_file_range() we pass a (size_t *)lenp to
zfs_clone_range() that expects a (uint64_t *)
Allow compiling armv6 world by limiting ARM macros in sha256_impl.c and
sha512_impl.c to __ARM_ARCH > 6
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Reviewed-by: Signed-off-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#14674
It was previously available only to FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Seagate Technology LLC
Closes#14718
It may happen that "wanted total ARC size" (wt) is negative, that was
expected. But multiplication product of it and unsigned fractions
result in unsigned value, incorrectly shifted right with a sing loss.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14692
The type def of writepage_t in kernel 6.3 is changed to take
struct folio* as the first argument. We need to detect this
change and pass correct function to write_cache_pages().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#14699
The kmem allocation in zfs_prune_aliases() will trigger a large
allocation warning on systems with 64K pages. Resolve this by
switching to vmem_alloc() which internally uses kvmalloc() so the
right allocator will be used based on the allocation size.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8491Closes#14694
Address the following bugs in persistent error log:
1) Check nested clones, eg "fs->snap->clone->snap2->clone2".
2) When deleting files containing error blocks in those clones (from
"clone" the example above), do not break the check chain.
3) When deleting files in the originating fs before syncing the errlog
to disk, do not break the check chain. This happens because at the
time of introducing the error block in the error list, we do not have
its birth txg and the head filesystem. If the original file is
deleted before the error list is synced to the error log (which is
when we actually lookup the birth txg and the head filesystem), then
we do not have access to this info anymore and break the check chain.
The most prominent change is related to achieving (3). We expand the
spa_error_entry_t structure to accommodate the newly introduced
zbookmark_err_phys_t structure (containing the birth txg of the error
block).Due to compatibility reasons we cannot remove the
zbookmark_phys_t structure and we also need to place the new structure
after se_avl, so it is not accounted for in avl_find(). Then we modify
spa_log_error() to also provide the birth txg of the error block. With
these changes in place we simplify the previously introduced function
get_head_and_birth_txg() (now named get_head_ds()).
We chose not to follow the same approach for the head filesystem (thus
completely removing get_head_ds()) to avoid introducing new lock
contentions.
The stack sizes of nested functions (as measured by checkstack.pl in the
linux kernel) are:
check_filesystem [zfs]: 272 (was 912)
check_clones [zfs]: 64
We also introduced two new tests covering the above changes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14633
Current autotrim causes short-lived txg through:
1. calling txg_wait_synced() in metaslab_enable()
2. calling txg_wait_open() with should_quiesce = true
This patch addresses all the issues mentioned above.
A new cv, vdev_autotrim_kick_cv is added to kick autotrim activity.
It will be signaled once a txg is synced so that it does not change
the original autotrim pace. Also because it is a cv, the wait is
interruptible which speeds up the vdev_autotrim_stop_wait() call.
Finally, combining big zfs_txg_timeout, txg_wait_open() also causes
delay when exporting a pool.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: jxdking <lostking2008@hotmail.com>
Issue #8993Closes#12194
Holding the zp->z_rangelock as a RL_READER over the range
0-UINT64_MAX is sufficient to prevent the dnode from being
re-dirtied by concurrent writers. To avoid potentially
looping multiple times for external caller which do not
take the rangelock holes are not reported after the first
sync. While not optimal this is always functionally correct.
This change adds the missing rangelock calls on FreeBSD to
zvol_cdev_ioctl().
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14512Closes#14641
This reverts commit 7d638df09b.
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#14678
zfsd fetches new pool configuration through ZFS_IOC_POOL_STATS but
it does not get updated nvlist configuration for spare vdev since
the configuration is read by spa_spares->sav_config. In this commit,
updating the vdev state for spare vdev that is consumed by zfsd on
spare disk hotplug.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14653
This is probably the uncontroversial part of #13631, which fixes
a real problem people are having.
There's still things to improve in our code after this is merged,
but it should stop the breakage that people have reported, where
we lie about a type always being aligned and then pass in stack
objects with no alignment requirement and hope for the best.
Of course, our SIMD code was written with unaligned accesses, so it
doesn't care if we drop this...but some auto-vectorized code that
gcc emits sure does, since we told it it can assume they're aligned.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#14649
There is a window in the slog removal code where a panic loop could
ensue if the system crashes during that operation. The original design
of slog removal did not persisted any state because the removal happened
synchronously. This was changed by a later commit which persisted the
vdev_removing flag and exposed this bug. If a slog removal is in
progress and happens to crash after persisting the vdev_removing flag to
the label but before the vdev is removed from the spa config, then the
pool will continue to panic on import. Here's a sample of the panic:
[ 134.387411] VERIFY0(0 == dmu_buf_hold_array(os, object, offset, size,
FALSE, FTAG, &numbufs, &dbp)) failed (0 == 22)
[ 134.393865] PANIC at dmu.c:1135:dmu_write()
[ 134.396035] Kernel panic - not syncing: VERIFY0(0 ==
dmu_buf_hold_array(os, object, offset, size, FALSE, FTAG, &numbufs,
&dbp)) failed (0 == 22)
[ 134.397857] CPU: 2 PID: 5914 Comm: txg_sync Kdump: loaded Tainted:
P OE 5.4.0-1100-dx2023020205-b3751f8c2-azure #106
[ 134.407938] Hardware name: Microsoft Corporation Virtual
Machine/Virtual Machine, BIOS 090008 12/07/2018
[ 134.407938] Call Trace:
[ 134.407938] dump_stack+0x57/0x6d
[ 134.407938] panic+0xfb/0x2d7
[ 134.407938] spl_panic+0xcf/0x102 [spl]
[ 134.407938] ? traverse_impl+0x1ca/0x420 [zfs]
[ 134.407938] ? dmu_object_alloc_impl+0x3b4/0x3c0 [zfs]
[ 134.407938] ? dnode_hold+0x1b/0x20 [zfs]
[ 134.407938] dmu_write+0xc3/0xd0 [zfs]
[ 134.407938] ? space_map_alloc+0x55/0x80 [zfs]
[ 134.407938] metaslab_sync+0x61a/0x830 [zfs]
[ 134.407938] ? queued_spin_unlock+0x9/0x10 [zfs]
[ 134.407938] vdev_sync+0x72/0x190 [zfs]
[ 134.407938] spa_sync_iterate_to_convergence+0x160/0x250 [zfs]
[ 134.407938] spa_sync+0x2f7/0x670 [zfs]
[ 134.407938] txg_sync_thread+0x22d/0x2d0 [zfs]
[ 134.407938] ? txg_dispatch_callbacks+0xf0/0xf0 [zfs]
[ 134.407938] thread_generic_wrapper+0x83/0xa0 [spl]
[ 134.407938] kthread+0x104/0x140
[ 134.407938] ? kasan_check_write.constprop.0+0x10/0x10 [spl]
[ 134.407938] ? kthread_park+0x90/0x90
[ 134.457802] ret_from_fork+0x1f/0x40
This change no longer persists the vdev_removing flag when removing slog
devices and also cleans up some code that was added which is not used.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#14652
When traversing a tree of block pointers (e.g. for `zfs destroy <fs>` or
`zfs send`), we prefetch the indirect blocks that will be needed, in
`traverse_prefetch_metadata()`. In the case of `zfs destroy <fs>`, we
do a little traversing each txg, and resume the traversal the next txg.
So the indirect blocks that will be needed, and thus are candidates for
prefetching, does not include blocks that are before the resume point.
The problem is that the logic for determining if the indirect blocks are
before the resume point is incorrect, causing the (up to 1024) L1
indirect blocks that are inside the first L2 to not be prefetched. In
practice, if we are able to read many more than 1024 blocks per txg,
then this will be inconsequential. But if i/o latency is more than a
few milliseconds, almost no L1's will be prefetched, so they will be
read serially, and thus the destroying will be very slow. This can be
observed as `zpool get freeing` decreasing very slowly.
Specifically: When we first examine the L2 that contains the block we'll
be resuming from, we have not yet resumed, so `td_resume` is nonzero.
At this point, all calls to `traverse_prefetch_metadata()` will fail,
even if the L1 in question is after the resume point. It isn't until
the callback is issued for the resume point that we zero out
`td_resume`, but by this point we've already attempted and failed to
prefetch everything under this L2 indirect block.
This commit addresses the issue by reusing the existing
`resume_skip_check()` to determine if the L1's bookmark is before or
after the resume point. To do so, this function is made non-mutating
(the caller now zeros `td_resume`).
Note, this bug likely predates (was not introduced by) #11803.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#14603
Undirty the dbuf and destroy its buffer when cloning into it.
Coverity ID: CID-1535375
Reported-by: Richard Yao
Reported-by: Benjamin Coddington
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14655
Constify some variables after d1807f168e.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14656
Remove arc_reduce_target_size() call from arc_prune_task(). The idea
of arc_prune_task() is to remove external references on ARC metadata,
such as vnodes. Since arc_prune_async() is called only from ARC itself,
it makes no sense to create a parasitic loop between ARC eviction and
the pruning, treatening to drop ARC to its minimum. I can't guess why
it was added as part of FreeBSD to OpenZFS integration.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14639
031d7c2fe6 did not handle reverse
iteration, such that the original issue theoretically could still occur.
Note that contrary to the claim in the ZFS disk format specification
that a maximum of 6 levels are possible, 9 levels are possible with
recordsize=512 and and indirect block size of 16KB. In this unusual
configuration, span will be 65. The maximum size of span at 70 can be
reached at recordsize=16K and an indirect blocksize of 16KB.
When we are at this indirection level and are traversing backward, the
minimum value is start, but we cannot calculate that with 64-bit
arithmetic, so we avoid the calculation and instead rely on the earlier
statement that did `*offset = start;`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1466214)
Closes#14618
CpaDcRqResults have to be initialized with checksum=1 for adler32.
Otherwise when error CPA_DC_OVERFLOW occurred, the next compress
operation will continue on previously part-compressed data, and write
invalid checksum data. When zfs decompress the compressed data, a
invalid checksum will occurred and lead to #14463
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Weigang Li <weigang.li@intel.com>
Reviewed-by: Chengfei Zhu <chengfeix.zhu@intel.com>
Signed-off-by: naivekun <naivekun0817@gmail.com>
Closes#14632Closes#14463
This commit removes the edonr_byteorder.h file and all unused
variants of Edon-R.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13618
After addressing coverity complaints involving `nvpair_name()`, the
compiler started complaining about dropping const. This lead to a rabbit
hole where not only `nvpair_name()` needed to be constified, but also
`nvpair_value_string()`, `fnvpair_value_string()` and a few other static
functions, plus variable pointers throughout the code. The result became
a fairly big change, so it has been split out into its own patch.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14612
Clang's static analyzer complains about a possible NULL pointer
dereference in nvlist_lookup_nvpair_ei_sep() because it unconditionally
dereferences a pointer initialized by `nvpair_value_nvlist_array()`
under the assumption that `nvpair_value_nvlist_array()` will always
initialize the pointer without checking to see if an error was returned
to indicate otherwise. This itself is improper error handling, so we fix
it. However, fixing it to properly respond to errors is not enough to
avoid a NULL pointer dereference, since we can receive NULL when the
array is empty, so we also add a NULL check.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14612
Clang's static analyzer complains that nvs_xdr() and nvs_native()
functions return pointers to stack memory. That is technically true, but
the pointers are stored in stack memory from the caller's stack frame,
are not read by the caller and are deallocated when the caller returns,
so this is harmless. We set the pointers to NULL to silence the
warnings.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14612
Coverity reported a dereference after a NULL check in dbuf_verify(). If
`dn` is `NULL`, we can just assume that !dn->dn_free_txg, so we change
`!dn->dn_free_txg` to `(dn == NULL || !dn->dn_free_txg)`.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-992298)
Closes#14619
The commit replaces all findings of the link:
http://www.opensolaris.org/os/licensing with this one:
https://opensource.org/licenses/CDDL-1.0
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#14625
After 67a1b03791 was merged, coverity
started complaining about an uninitialized scalar variable in
flush_write_batch_impl() due to the new field zp.zp_brtwrite. Upon
inspection, it appears that uninitialized memory was being copied for
non-raw streams, so this is a pre-existing issue. The addition of
zp_brtwrite by the block cloning commit caused Coverity to begin to
notice it.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535378)
Closes#14607
da19d919a8 changed this in a way that
permits execution to reach `if (err == 0)` without initializing err.
This could randomly cause the sync task to not execute. We fix that by
initializing err to zero.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535377)
Closes#14607
`lseek(SEEK_DATA | SEEK_HOLE)` are only accurate when the on-disk blocks
reflect all writes, i.e. when there are no dirty data blocks. To ensure
this, if the target dnode is dirty, they wait for the open txg to be
synced, so we can call them "stabilizing operations". If they cause
txg_wait_synced often, it can be detrimental to performance.
Typically, a group of files are all modified, and then SEEK_DATA/HOLE
are performed on them. In this case, the first SEEK does a
txg_wait_synced(), and subsequent SEEKs don't need to wait, so
performance is good.
However, if a workload involves an interleaved metadata modification,
the subsequent SEEK may do a txg_wait_synced() unnecessarily. For
example, if we do a `read()` syscall to each file before we do its SEEK.
This applies even with `relatime=on`, when the `read()` is the first
read after the last write. The txg_wait_synced() is unnecessary because
the SEEK operations only care that the structure of the tree of indirect
and data blocks is up to date on disk. They don't care about metadata
like the contents of the bonus or spill blocks. (They also don't care
if an existing data block is modified, but this would be more involved
to filter out.)
This commit changes the behavior of SEEK_DATA/HOLE operations such that
they do not call txg_wait_synced() if there is only a pending change to
the bonus or spill block.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#13368
Issue #14594
Issue #14512
Issue #14009
Currently calls to kfpu_begin() and kfpu_end() are split between
the init() and fini() functions of the particular SIMD
implementation. This was done in #14247 as an optimization measure
for the ABD adapter. Unfortunately the split complicates FPU
handling on platforms that use a local FPU state buffer, like
Windows and macOS.
To ease porting, we introduce a boolean struct member in
fletcher_4_ops_t, indicating use of the FPU, and move the FPU state
handling from the SIMD implementations to the call sites.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#14600
Block Cloning allows to manually clone a file (or a subset of its
blocks) into another (or the same) file by just creating additional
references to the data blocks without copying the data itself.
Those references are kept in the Block Reference Tables (BRTs).
The whole design of block cloning is documented in module/zfs/brt.c.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#13392
The problem occurs because dmu_recv_begin pulls in the payload and
next header from the input stream in order to use the contents of
the begin record's nvlist. However, the change to do that before the
other checks in dmu_recv_begin occur caused a regression where an
empty send stream in a recursive send could have its END record
consumed by this, which broke the logic of recv_skip. A test is
also included to protect against this case in the future.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#12661Closes#14568
The txg_sync thread will see certain buffers in a DR_IN_DMU_SYNC state
when ZIL is writing them out. Then it waits until the state changes, but
has an assertion to check that they were not DR_NOT_OVERRIDDEN. If the
data write failed with an error, ZIL will put it into the
DR_NOT_OVERRIDDEN state. It looks like the code will handle that state
without an issue, so we can just delete the assertion.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Closes#14283
63652e1546 added unnecessary branches in
`vdev_stat_update()` to suppress an ASAN false positive the breaks
ztest. This had the downside of causing false positive reports in both
Coverity and Clang's static analyzer. vd is never NULL, so we add a
preprocessor check to only apply the workaround when compiling with ASAN
support.
Reported-by: Coverity (CID-1524583)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
ae7e700650 added an assertion to suppress
a complaint from Clang's static analyzer. Unfortunately, it missed
another way for Clang to complain about this function. This adds another
assertion to handle that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang Tidy reported this as a misc-redundant-expression because writing
`8` instead of `'8'` meant that the condition could never be true.
The only place where we have a chance of this being a bug would be in
nvlist_lookup_nvpair_ei_sep(). I am not sure if we ever pass an octal to
that, but if we ever do, it should work properly now instead of failing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer points out that if we fail to find an extended
attribute directory, but somehow find it when calculating delete_now and
delete_now is true, we will have a NULL pointer dereference when we try
to unlink the extended attribute directory.
I am not sure if this is possible, but if it is, I do not see a sane way
of handling this other than rolling back the transaction and retrying.
For now, let us do an VERIFY_IMPLY(). If this trips, it will stop the
transaction from committing, which will prevent an attribute directory
leak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
A CodeChecker report from Clang's CTU analysis indicated that we were
assigning uninitialized values in crypto_create_ctx_template() when we
call it from zio_crypt_key_init(). This occurs because the ->cm_param
and ->cm_param_len fields are uninitialized. Thankfully, the
uninitialized values are only used in the skein via
KCF_PROV_CREATE_CTX_TEMPLATE() -> skein_create_ctx_template() ->
skein_mac_ctx_build() -> skein_get_digest_bitlen(), but that should not
be called from here. We fix this to avoid a possible trap should this
code change in the future.
The FreeBSD version of zio_crypt_key_init() is unaffected.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
scan-build does not do cross translation unit analysis to realize that
`dmu_buf_hold()` will always set `bpo->bpo_cached_dbuf` to a non-NULL
pointer, so we add an assertion to make it realize this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer reports that if we try to rename a root dataset
in `dsl_dir_rename_sync()`, we will have a NULL pointer passed to
strlcpy(). This is impossible because `dsl_dir_rename_check()` will
prevent us from doing this. We add an assertion to silence this warning.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
CodeQL's cpp/constant-comparison query from its security-and-extended
query set reported 4 instances where we have comparions that always
evaluate the same way.
In `draid_config_by_type()`, we have an early `if (nparity == 0)` check
that returns `EINVAL`, making a later `if (nparity == 0 || nparity >
VDEV_DRAID_MAXPARITY)` partially redundant. The later check prints an
error message when parity is 0, but the early check does not. This is
not useful feedback, so we move the later check to the place where the
early check runs to replace the early check.
In `perform_thread_merge()`, we return when `num_threads == 0`. After
that block, we do `if (num_threads > 0) {`, which will always be true.
We remove the `if` statement.
In `sa_modify_attrs()`, we have a loop condition that is `k != 2`, but
at the end of the loop, we have `if (k == 0 && hdl->sa_spill)` followed
by an else that does a break. The result is that k != 2 will never be
evaluated when it is false. We drop the comparison.
In `zap_leaf_array_read()`, we have a for loop condition that is `i <
ZAP_LEAF_ARRAY_BYTES && len > 0`. However, that loop itself is in a loop
that is `while (len > 0)` and while the value of len is decremented
inside the loop, when `len == 0`, it will return, such that `len > 0`
inside the loop condition will always be true. We drop that part of the
condition.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer reports that if a `blkid == DMU_SPILL_BLKID` is
passed, then we can have a NULL pointer dereference when either
->dn_have_spill or `DNODE_FLAG_SPILL_BLKPTR` is not set. This should not
happen. We add an `ASSERT()` to suppress reports about NULL pointer
dereferences.
Originally, I wanted to use one or two IMPLY statements on
pre-conditions before the call to `dbuf_findbp()`, but Clang's static
analyzer did not understand it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer pointed out that we can have a NULL pointer
dereference if we ever attempt to split a vdev that has only 1 child. If
that happens, we are left with zero children, but then try to access a
non-existent child. Calling vdev_split() on a vdev with only 1 child
should be impossible due to how the code is structured. If this ever
happens, it would be best to stop execution immediately even in a
production environment to allow for the best possible chance of recovery
by an expert, so we use `VERIFY3U()` instead of `ASSERT3U()`.
Unfortunately, while that defensive assertion will prevent execution
from ever reaching the NULL pointer dereference, Clang's static analyzer
does not realize that, so we add an `ASSERT()` to inform it of this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
This has been filed as llvm/llvm-project#60694. Switching from a copy
through a C pointer dereference to an explicit memcpy() is a workaround
that prevents a false positive.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer reports a possible NULL pointer dereference in
abd_get_size() when called from vdev_draid_map_alloc_write() called from
vdev_draid_map_alloc_row() and vdc->vdc_nparity == 0. This should be
impossible, so we add an assertion to silence the defect report.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
