Starting approximately from version 1302506 vn_lock_pair() grown two
additional arguments following head. There is a one week hole, but
that is closet reference point we have.
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15047
The default timeout for ZVOL opens may not be sufficient for all cases,
so we should enable the value to be more easily tuned to account for
systems where the default value is insufficient.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes#15023
The DDT is really inefficient on 4k and up vdevs, because it always
allocates 4k blocks, and while compression could save us somewhat
at ashift 9, that stops being true.
So let's change the default to 32 KiB, which seems like a reasonable
compromise between improved space savings and inflated write sizes
for DDT updates.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#14654
The previous comment wondered if this case could happen; it turns out
that it really can't.
This block can only be entered if dde_type and dde_class are "real";
that only happens when a ddt entry has been previously synced to a ddt
store, that is, it was created on a previous txg. Since its gone through
that sync, its dde_refcount must be >0.
ddt_addref() is called from brt_pending_apply(), which is called at the
beginning of spa_sync(), before pending DMU writes/frees are issued.
Freeing a dedup block is the only thing that can decrement dde_refcount,
so there's no way for it to drop to zero before applying the clone bumps
it.
Further, even if it _could_ go to zero, it wouldn't be necessary to fill
the entry from the block. The phys content is not cleared until the free
is issued, which happens when the refcount goes to zero, when the last
real free comes through. The cloned block should be identical to what's
in the phys already, so the fill should be a no-op anyway.
I've replaced this with an assertion because this is all very dependent
on the ordering in which BRT and DDT changes are applied, and that might
change in the future.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: Klara, Inc.
Closes#15004
With zl_suspend read in zil_commit() not protected by any locks it
is possible for new ZIL writes to be in progress while zil_destroy()
called by zil_suspend() freeing them. This patch closes the race
by taking zl_issuer_lock in zil_suspend() and adding the second
zl_suspend check to zil_get_commit_list(), protected by the lock.
It allows all already queued transactions to be logged normally,
while blocks any new ones, calling txg_wait_synced() for the TXGs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14979
- Pack struct zio_prop by 4 bytes from 84 to 80.
- Skip new child ZIO locking while linking to parent. The newly
allocated ZIO is not externally visible yet, so nobody should care.
- Skip io_bp_copy writes when not used (write && non-debug).
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14985
Scan process may skip blocks based on their birth time, DVA, etc.
Traditionally those blocks were accounted as issued, that caused
reporting of hugely over-inflated numbers, having nothing to do
with actual disk I/O. This change utilizes never used field in
struct dsl_scan_phys to account such skipped bytes, allowing to
report how much data were actually scrubbed/resilvered and what
is the actual I/O speed. While formally it is an on-disk format
change, it should be compatible both ways, so should not need a
feature flag.
This should partially address the same issue as c85ac731a0, but
from a different perspective, complementing it.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15007
lwb->lwb_issued_txg can not be accessed after lwb_state is set to
LWB_STATE_FLUSH_DONE and zl_lock is dropped, since the lwb may be
freed by zil_sync(). We must save the txg number before that.
This is similar to the 55b1842f92, but as I see the bug is not new.
It existed for quite a while, just was not triggered due to smaller
race window.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14988Closes#14999
When ZFS appends files in chunks bigger than recordsize, it borrows
buffer from ARC and fills it before opening transaction. This
supposed to help in case of page faults to not hold transaction open
indefinitely. The problem appears when recordsize is set lower than
default 128KB. Since each block is committed in separate transaction,
per-transaction overhead becomes significant, and what is even worse,
active use of of per-dataset and per-pool locks to protect space use
accounting for each transaction badly hurts the code SMP scalability.
The same transaction size limitation applies in case of file rewrite,
but without even excuse of buffer borrowing.
To address the issue, disable the borrowing mechanism if recordsize
is smaller than default and the write request is 4x bigger than it.
In such case writes up to 32MB are executed in single transaction,
that dramatically reduces overhead and lock contention. Since the
borrowing mechanism is not used for file rewrites, and it was never
used by zvols, which seem to work fine, I don't think this change
should create significant problems, partially because in addition to
the borrowing mechanism there are also used pre-faults.
My tests with 4/8 threads writing several files same time on datasets
with 32KB recordsize in 1MB requests show reduction of CPU usage by
the user threads by 25-35%. I would measure it in GB/s, but at that
block size we are now limited by the lock contention of single write
issue taskqueue, which is a separate problem we are going to work on.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14964
Switch FIFO queues (SYNC/TRIM) and active queue of vdev queue from
time-sorted AVL-trees to simple lists. AVL-trees are too expensive
for such a simple task. To change I/O priority without searching
through the trees, add io_queue_state field to struct zio.
To not check number of queued I/Os for each priority add vq_cqueued
bitmap to struct vdev_queue. Update it when adding/removing I/Os.
Make vq_cactive a separate array instead of struct vdev_queue_class
member. Together those allow to avoid lots of cache misses when
looking for work in vdev_queue_class_to_issue().
Introduce deadline of ~0.5s for LBA-sorted queues. Before this I
saw some I/Os waiting in a queue for up to 8 seconds and possibly
more due to starvation. With this change I no longer see it. I
had to slightly more complicate the comparison function, but since
it uses all the same cache lines the difference is minimal. For a
sequential I/Os the new code in vdev_queue_io_to_issue() actually
often uses more simple avl_first(), falling back to avl_find() and
avl_nearest() only when needed.
Arrange members in struct zio to access only one cache line when
searching through vdev queues. While there, remove io_alloc_node,
reusing the io_queue_node instead. Those two are never used same
time.
Remove zfs_vdev_aggregate_trim parameter. It was disabled for 4
years since implemented, while still wasted time maintaining the
offset-sorted tree of TRIM requests. Just remove the tree.
Remove locking from txg_all_lists_empty(). It is racy by design,
while 2 pair of locks/unlocks take noticeable time under the vdev
queue lock.
With these changes in my tests with volblocksize=4KB I measure vdev
queue lock spin time reduction by 50% on read and 75% on write.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14925
It's been observed that in certain workloads (zvol-related being a
big one), ZFS will end up spending a large amount of time spinning
up taskqs only to tear them down again almost immediately, then
spin them up again...
I noticed this when I looked at what my mostly-idle system was doing
and wondered how on earth taskq creation/destroy was a bunch of time...
So I added a configurable delay to avoid it tearing down tasks the
first time it notices them idle, and the total number of threads at
steady state went up, but the amount of time being burned just
tearing down/turning up new ones almost vanished.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#14938
482da24e2 missed arc_buf_destroy() calls on log parse errors, possibly
leaking up to 128KB of memory per dataset during ZIL replay.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14987
Those callbacks were introduced many years ago as part of a bigger
patch to smoothen the write throttling within a txg. They allow to
account completion of individual physical writes within a logical
one, improving cases when some of physical writes complete much
sooner than others, gradually opening the write throttle.
Few years after that ZFS got allocation throttling, working on a
level of logical writes and limiting number of writes queued to
vdevs at any point, and so limiting latency distribution between
the physical writes and especially writes of multiple copies.
The addition of scheduling deadline I proposed in #14925 should
further reduce the latency distribution. Grown memory sizes over
the past 10 years should also reduce importance of the smoothing.
While the use of physdone callback may still in theory provide
some smoother throttling, there are cases where we simply can not
afford it. Since dirty data accounting is protected by pool-wide
lock, in case of 6-wide RAIDZ, for example, it requires us to take
it 8 times per logical block write, creating huge lock contention.
My tests of this patch show radical reduction of the lock spinning
time on workloads when smaller blocks are written to RAIDZ pools,
when each of the disks receives 8-16KB chunks, but the total rate
reaching 100K+ blocks per second. Same time attempts to measure
any write time fluctuations didn't show anything noticeable.
While there, remove also io_child_count/io_parent_count counters.
They are used only for couple assertions that can be avoided.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14948
With large number of tracked references list searches under the lock
become too expensive, creating enormous lock contention.
On my tests with ZFS_DEBUG enabled this increases write throughput
with 32KB blocks from ~1.2GB/s to ~7.5GB/s.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14970
If this is not done, and the pool has an ashift other than the default
(at the moment 9) then the following happens:
1) vdev_alloc() assigns the ashift of the pool to L2ARC device, but
upon export it is not stored anywhere
2) at the first import, vdev_open() sees an vdev_ashift() of 0 and
assigns the logical_ashift, which is 9
3) reading the contents of L2ARC, including the header fails
4) L2ARC buffers are not restored in ARC.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14313Closes#14963
While commit bcd5321 adjusts the write size based on the size of the log
block, this happens after comparing the unadjusted write size to the
evicted (target) size.
In this case l2ad_hand will exceed l2ad_evict and violate an assertion
at the end of l2arc_write_buffers().
Fix this by adding the max log block size to the allocated size of the
buffer to be committed before comparing the result to the target
size.
Also reset the l2arc_trim_ahead ZFS module variable when the adjusted
write size exceeds the size of the L2ARC device.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14936Closes#14954
It was a vdev level read cache, designed to aggregate many small
reads by speculatively issuing bigger reads instead and caching
the result. But since it has almost no idea about what is going
on with exception of ZIO_FLAG_DONT_CACHE flag set by higher layers,
it was found to make more harm than good, for which reason it was
disabled for the past 12 years. These days we have much better
instruments to enlarge the I/Os, such as speculative and prescient
prefetches, I/O scheduler, I/O aggregation etc.
Besides just the dead code removal this removes one extra mutex
lock/unlock per write inside vdev_cache_write(), not otherwise
disabled and trying to do some work.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14953
... instead of list_head() + list_remove(). On FreeBSD the list
functions are not inlined, so in addition to more compact code
this also saves another function call.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14955
We are not allowed to access lwb after setting LWB_STATE_FLUSH_DONE
state and dropping zl_lock, since it may be freed by zil_sync().
To free itxs and waiters after dropping the lock we need to move
lwb_itxs and lwb_waiters lists elements to local storage.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14957Closes#14959
When a kmem cache is exhausted and needs to be expanded a new
slab is allocated. KM_SLEEP callers can block and wait for the
allocation, but KM_NOSLEEP callers were incorrectly allowed to
block as well.
Resolve this by attempting an emergency allocation as a best
effort. This may fail but that's fine since any KM_NOSLEEP
consumer is required to handle an allocation failure.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
l2arc_write_size() should return the write size after adjusting for trim
and overhead of the L2ARC log blocks. Also take into account the
allocated size of log blocks when deciding when to stop writing buffers
to L2ARC.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14939
This is more-or-less like `zfs send`, but specifying the snapshot by its
objset id for situations where it can't be referenced any other way.
Sponsored-By: Klara, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#14642
There's no particular reason this function should be kernel-only, and I
want to use it (indirectly) from zdb. I've moved it to zfs_znode.c
because libzpool does not compile in zfs_vfsops.c, and this at least
matches the header its imported from.
Sponsored-By: Klara, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#14642
There are two places where we need to add/remove several references
with semantics of zfs_refcount_(add|remove). But when debug/tracing
is disabled, it is a crime to run multiple atomic_inc() in a loop,
especially under congested pool-wide allocator lock.
Introduced new functions implement the same semantics as the loop,
but without overhead in production builds.
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14934
There seems to be no reason for ZIL blocks to be limited by 128KB
other than replay code is written in such a way. This change does
not increase the limit yet, just removes the artificial limitation.
Avoided extra memcpy() may save us a second during replay.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14910
A NULL pointer will occur when doing a 'zfs send -S' on a dataset that
is still being received. The problem is that the new 'send' will
rightfully fail to own the datasets (i.e. dsl_dataset_own_force() will
fail), but then dmu_send() will still do the dsl_dataset_disown().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Luís Henriques <henrix@camandro.org>
Closes#14903Closes#14890
This implements a binary search algorithm for B-Trees that reduces
branching to the absolute minimum necessary for a binary search
algorithm. It also enables the compiler to inline the comparator to
ensure that the only slowdown when doing binary search is from waiting
for memory accesses. Additionally, it instructs the compiler to unroll
the loop, which gives an additional 40% improve with Clang and 8%
improvement with GCC.
Consumers must opt into using the faster algorithm. At present, only
B-Trees used inside kernel code have been modified to use the faster
algorithm.
Micro-benchmarks suggest that this can improve binary search performance
by up to 3.5 times when compiling with Clang 16 and up to 1.9 times when
compiling with GCC 12.2.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14866
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14894
In addition to a number of actual log bytes written, account also a
total written bytes including padding and total allocated bytes (bytes
<= write <= alloc). It should allow to monitor zil traffic and space
efficiency.
Add dtrace probe for zil block size selection.
Make zilstat report more information and fit it into less width.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14863
Before this change ZIL copied all log data while holding the lock.
It caused huge lock contention on workloads with many big parallel
writes. This change splits the process into two parts: first,
zil_lwb_assign() estimates the log space needed for all transactions,
and zil_lwb_write_close() allocates blocks and zios while holding the
lock, then, after the lock in dropped, zil_lwb_commit() copies the
data, and zil_lwb_write_issue() issues the I/Os.
Also while there slightly reduce scope of zl_lock.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14841
For draid vdevs it was possible to initiate both the
sequential and healing resilver at same time.
This fixes the following two scenarios.
1) There's a window where a sequential rebuild can
be started via ZED even if a healing resilver has been
scheduled.
- This is fixed by adding additional check in
spa_vdev_attach() for any scheduled resilver and return
appropriate error code when a resilver is already in
progress.
2) It was possible for zpool clear to start a healing
resilver when it wasn't needed at all. This occurs because
during a vdev_open() the device is presumed to be healthy not
until the device is validated by vdev_validate() and it's set
unavailable. However, by this point an async resilver will
have already been requested if the DTL isn't empty.
- This is fixed by cancelling the SPA_ASYNC_RESILVER
request immediately at the end of vdev_reopen() when a resilver
is unneeded.
Finally, added a testcase in ZTS for verification.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#14881Closes#14892
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#14891
Commit 555ef90 did some general code refactoring for
dmu_buf_will_not_fill() and dmu_buf_will_fill(). However, the db_mtx was
not held when update db->db_state in those code block. The rest of the
dbuf code always holds the db_mtx when updating db_state. This is
important because cv_wait() db_changed is used to check for db_state
changes.
Updating dmu_buf_will_not_fill() and dmu_buf_will_fill() to hold the
db_mtx when updating db_state.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#14875
Before allowing the ZED to mark a vdev as REMOVED due to a
hotplug event confirm that it is non-responsive with probe.
Any device which can be successfully probed should be left
ONLINE to prevent a healthy pool from being incorrectly
SUSPENDED. This may occur for at least the following two
scenarios.
1) Drive expansion (zpool online -e) in VMware environments.
If, during the partition resize operation, a partition is
removed and re-created then udev will send a removed event.
2) Re-scanning the namespaces of an NVMe device (nvme ns-rescan)
may result in a udev remove and add event being delivered.
Finally, update the ZED to only kick in a spare when the
removal was successful.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14859Closes#14861
Added a flag '-e' in zpool scrub to scrub only blocks in error log. A
user can pause, resume and cancel the error scrub by passing additional
command line arguments -p -s just like a regular scrub. This involves
adding a new flag, creating new libzfs interfaces, a new ioctl, and the
actual iteration and read-issuing logic. Error scrubbing is executed in
multiple txg to make sure pool performance is not affected.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: TulsiJain tulsi.jain@delphix.com
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#8995Closes#12355
zpool initialize functions well for touching every free byte...once.
But if we want to do it again, we're currently out of luck.
So let's add zpool initialize -u to clear it.
Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12451Closes#14873
8eae2d214c caused Coverity to begin
complaining about "Improper use of negative value" in two places in
spa_sync_props() because Coverity correctly inferred from `prop ==
ZPOOL_PROP_INVAL` that prop could be -1 while both zpool_prop_to_name()
and zpool_prop_get_type() use it an array index, which is undefined
behavior.
Assuming that the system does not panic from an attempt to read invalid
memory, the case statement for ZPOOL_PROP_INVAL will ensure that only
user properties will reach this code when prop is ZPOOL_PROP_INVAL, such
that execution will continue safely. However, if we are unlucky enough
to read invalid memory, then the system will panic.
This issue predates the patch that caused coverity to begin complaining.
Thankfully, our userland tools do not pass nonsense to us, so this bug
should not be triggered unless a future userland tool attempts to set a
property that we do not understand.
Reported-by: Coverity (CID-1561129)
Reported-by: Coverity (CID-1561130)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14860
6839ec6f10 placed code in
spa_remove_healed_errors() that uses a pointer after the kmem_free()
call that frees it.
Reported-by: Coverity (CID-1562375)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14860
There is no sense to keep that memory allocated during the flush.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14855
Should not cause functional changes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14854
The dmu_buf_is_dirty() call doesn't make sense here for two reasons:
1. txg is 0 for unassigned tx, so it was a no-op.
2. It is equivalent of checking if we have dirty records and we are doing
this few lines earlier.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14825
I don't know an easy way to shrink down dbuf size, so just deny block cloning
into dbufs that don't match our BP's size.
This fixes the following situation:
1. Create a small file, eg. 1kB of random bytes. Its dbuf will be 1kB.
2. Create a larger file, eg. 2kB of random bytes. Its dbuf will be 2kB.
3. Truncate the large file to 0. Its dbuf will remain 2kB.
4. Clone the small file into the large file. Small file's BP lsize is
1kB, but the large file's dbuf is 2kB.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14825
Reimplement some of the block cloning vs dbuf logic, mostly to fix
situation where we clone a block and in the same transaction group
we want to partially overwrite the clone.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14825
At least for RAIDZ zio_shrink() does not reduce zio size, but reduced
wsz in that case likely results in writing uninitialized memory.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14853
Protect zvol_cdev_read with zv_suspend_lock to prevent concurrent
release of the dnode, avoiding panic when a snapshot is rolled back
in parallel during ongoing zvol read operation.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14839
Provides an interface which callers can use to declare a write when
the exact starting offset in not yet known. Since the full range
being updated is not available only the first L0 block at the
provided offset will be prefetched.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14819
l2arc_evict() performs the adjustment of the size of buffers to be
written on L2ARC unnecessarily. l2arc_write_size() is called right
before l2arc_evict() and performs those adjustments.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14828
We only need to know if ZIO has any parent there. We do not care if
it has more than one, but use of zio_unique_parent() == NULL asserts
that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14823
In case check_filesystem() does not error out and does not report
an error, remove that error block from error lists and logs
without requiring a scrub. This can happen when the original file and
all snapshots/clones referencing it have been removed.
Otherwise zpool status will still report that "Permanent errors have
been detected..." without actually reporting any of them.
To implement this change the functions introduced in corrective
receive were modified to take into account the head_errlog feature.
Before this change:
=============================
pool: test
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
config:
NAME STATE READ WRITE CKSUM
test ONLINE 0 0 0
/home/user/vdev_a ONLINE 0 0 2
errors: Permanent errors have been detected in the following files:
=============================
After this change:
=============================
pool: test
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are
unaffected.
action: Determine if the device needs to be replaced, and clear the
errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P
config:
NAME STATE READ WRITE CKSUM
test ONLINE 0 0 0
/home/user/vdev_a ONLINE 0 0 2
errors: No known data errors
=============================
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14813
For the head_errlog feature use dsl_dataset_hold_obj_flags() instead of
dsl_dataset_hold_obj() in order to enable access to the encryption keys
(if loaded). This enables reporting of errors in encrypted filesystems
which are not mounted but have their keys loaded.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14837
If a block pointer is corrupted (but the block containing it checksums
correctly, e.g. due to a bug that overwrites random memory), we can
often detect it before the block is read, with the `zfs_blkptr_verify()`
function, which is used in `arc_read()`, `zio_free()`, etc.
However, such corruption is not typically recoverable. To recover from
it we would need to detect the memory error before the block pointer is
written to disk.
This PR verifies BP's that are contained in indirect blocks and dnodes
before they are written to disk, in `dbuf_write_ready()`. This way,
we'll get a panic before the on-disk data is corrupted. This will help
us to diagnose what's causing the corruption, as well as being much
easier to recover from.
To minimize performance impact, only checks that can be done without
holding the spa_config_lock are performed.
Additionally, when corruption is detected, the raw words of the block
pointer are logged. (Note that `dprintf_bp()` is a no-op by default,
but if enabled it is not safe to use with invalid block pointers.)
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#14817
- There is no reason to assert that added gang is not empty. It
may be weird to add an empty gang, but it is legal.
- When moving chain list from the added gang clear its size, or it
will trigger assertion in abd_verify() when that gang is freed.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14816
On kernel module unload, free all zfsdev state structures, except for
zfsdev_state_listhead, which is statically allocated.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14824
spa_import() relies on a pool config fetched by spa_try_import() for
spare/cache devices. Import flags are not passed to spa_tryimport(),
which makes it return early due to a missing log device and missing
retrieving the cache device and spare eventually. Passing
ZFS_IMPORT_MISSING_LOG to spa_tryimport() makes it fetch the correct
configuration regardless of the missing log device.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14794
Integrate check_clones() into check_filesystem() and implement a list
instead of iterating recursively over the clones, thus eliminating the
risk of a stack overflow.
Also use kmem_zalloc() to allocate large structures in
process_error_log() reducing its stack size from ~700 to ~128 bytes.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14744
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14806
This is a temporary measure until a better fix is sorted out.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Closes#14785Closes#14808
Currently when layering the ABD buffer of each split block on top of
an indirect vdev's ZIO ABD we don't specify the split block's ABD.
This results in those ABDs being incorrectly sized by inheriting
the size of their parent ABD which is larger than what each split
block needs.
The above behavior isn't causing any bugs currently but can lead
to unexpected ABD sizes for people analyzing and/or working on
the ZIO codepath. This patch fixes this behavior by properly setting
the ABD size for split block ZIOs.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#14804
FreeBSD/powerpc64 is all ELFv2 since FreeBSD 13, even big endian. The
existing sha256 and sha512 asm code assumes that BE is all ELFv1, and LE
is ELFv2. Minor changes to add ELFv2 in the BE side gets this working
correctly on FreeBSD with latest OpenZFS import.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Justin Hibbits <chmeeedalf@gmail.com>
Closes#14779
TX_COMMIT has no on-disk representation and does not produce any more
dirty data. It should not wait for anything, and even just skipping
the checks if not waiting gives improvement noticeable in profiler.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14798
The x18 register isn't useable within FreeBSD kernel space, so we
have to fix the BLAKE3 aarch64 assembly for not using it.
The source files are here: https://github.com/mcmilk/BLAKE3-tests
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#14728
Gang ABDs without childred are legal, and they do have zero size.
For other ABD types zero size doesn't have much sense and likely
not working correctly now.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14795
This reverts commit 4c856fb333 to
resolve a newly introduced deadlock which in practice in more
disruptive that the issue this commit intended to address.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14775Closes#14790
Add loongarch64 definitions & lua module setjmp asm
LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Han Gao <gaohan@uniontech.com>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Closes#13422
It became illegal to not have them as of
5f6df177758b9dff88e4b6069aeb2359e8b0c493 ("vfs: validate that vop
vectors provide all or none fplookup vops") upstream.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#14788
Not complete, but already shaves on some locking.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Closes#14723
API contract requires VOPs to handle EXDEV internally, worst case by
falling back to the generic copy routine. This broke with the recent
changes.
While here whack custom loop to lock 2 vnodes with vn_lock_pair, which
provides the same functionality internally. write start/finish around
it plays no role so got eliminated.
One difference is that vn_lock_pair always takes an exclusive lock on
both vnodes. I did not patch around it because current code takes an
exclusive lock on the target vnode. zfs supports shared-locking for
writes, so this serializes different calls to the routine as is, despite
range locking inside. At the same time you may notice the source vnode
can get some traffic if only shared-locked, thus once more this goes
the safer route of exclusive-locking. Note this should be patched to
use shared-locking for both once the feature is considered stable.
Technically the switch to vn_lock_pair should be a separate change, but
it would only introduce churn immediately whacked by the rest of the
patch.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Closes#14723
Noticed while attempting to change FreeBSD's boolean_t into an actual
bool: in include/sys/zfs_ioctl_impl.h, zfs_vfs_held() is declared to
return a boolean_t, but in module/os/freebsd/zfs/zfs_ioctl_os.c it is
defined to return an int. Make the definition match the declaration.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#14776
Usage:
zpool set org.freebsd:comment="this is my pool" poolname
Tests are based on zfs_set's user property tests.
Also stop truncating property values at MAXNAMELEN, use ZFS_MAXPROPLEN.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Beckhoff Automation GmbH & Co. KG.
Sponsored-by: Klara Inc.
Closes#11680
Building with Clang on Linux generates a warning that err could be
uninitialized if mnt_ns is a NULL pointer. However, mnt_ns should never
be NULL, so there is no need to put this behind an if statement. Taking
it outside of the if statement means that the possibility of err being
uninitialized goes from being always zero in a way that the compiler
could not realize to a way that is always zero in a way that the
compiler can realize.
Sponsored-By: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Closes#14738
And add it to the AVZ, this is not backwards compatible with older pools
due to an assertion in spa_sync() that verifies the number of ZAPs of
all vdevs matches the number of ZAPs in the AVZ.
Granted, the assertion only applies to #DEBUG builds - still, a feature
flag is introduced to avoid the assertion, com.klarasystems:vdev_zaps_v2
Notably, this allows to get/set properties on the root vdev:
% zpool set user:prop=value <pool> root-0
Before this commit, it was already possible to get/set properties on
top-level vdevs with the syntax <type>-<vdev_id> (e.g. mirror-0):
% zpool set user:prop=value <pool> mirror-0
This syntax also applies to the root vdev as it is is of type 'root'
with a vdev_id of 0, root-0. The keyword 'root' as an alias for
'root-0'.
The following tests have been added:
- zpool get all properties from root vdev
- zpool set a property on root vdev
- verify root vdev ZAP is created
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes#14405
At our site we have seen cases when multi-modifier protection is enabled
(multihost=on) on our pool and the pool gets suspended due to a single
disk that is failing and responding very slowly. Our pools have 90 disks
in them and we expect disks to fail. The current version of MMP requires
that we wait for other writers before moving on. When a disk is
responding very slowly, we observed that waiting here was bad enough to
cause the pool to suspend. This change allows the MMP thread to bypass
waiting for other threads and reduces the chances the pool gets
suspended.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Herb Wartens <hawartens@gmail.com>
Closes#14659
Spare vdev should detach from the pool when a disk is reinserted.
However, spare detachment depends on the completion of resilvering,
and if resilver does not schedule, the spare vdev keeps attached to
the pool until the next resilvering. When a zfs pool contains
several disks (25+ mirror), resilvering does not always happen when
a disk is reinserted. In this patch, spare vdev is manually detached
from the pool when resilvering does not occur and it has been tested
on both Linux and FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14722
This reverts commit 4b3133e671.
Users identified this commit as a possible source of data
corruption:
https://github.com/openzfs/zfs/issues/14753
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #14753Closes#14761
The zfs_log_clone_range() function is never called from the
zfs_clone_range_replay() function, so I assumed it is safe to assert
that zil_replaying() is never TRUE here. It turns out zil_replaying()
also returns TRUE when the sync property is set to disabled.
Fix the problem by just returning if zil_replaying() returns TRUE.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported by: Florian Smeets
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14758
Don't overwrite blk_phys_birth, as for embedded blocks it is part of
the payload.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Issue #13392Closes#14739
Fix the code in case of missing snapshots. Previously the check was in
a conditional that would be executed if the filesystem had snapshots.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14735
The ereport.fs.zfs.checksum event contains histograms of the bits that
were wrongly set or cleared according to their bit position in a 64-bit
word. So the maximum value that any histogram bucket could have would
be 64. But ZFS currently uses a uint32_t to hold each bucket. As a
result, the event report is full of needless zeroes.
Change the bucket size to uint8_t, stripping 768 needless zeros from
each event.
Original event format:
```
class=ereport.fs.zfs.checksum ena=639460469834258433 pool=testpool.1933 pool_guid=4979719877084416563 pool_state=0 pool_context=0 pool_failmode=wait vdev_guid=4136721804819128578 vdev_type=file vdev_path=/tmp/kyua.1TxP3A/2/work/file1.1933 vdev_ashift=9 vdev_complete_ts=609837019678 vdev_delta_ts=33450 vdev_read_errors=0 vdev_write_errors=0 vdev_cksum_errors=20 vdev_delays=0 parent_guid=2751977006639883417 parent_type=raidz vdev_spare_guids= zio_err=0 zio_flags=1048752 zio_stage=4194304 zio_pipeline=65011712 zio_delay=0 zio_timestamp=0 zio_delta=0 zio_priority=4 zio_offset=702976 zio_size=1024 zio_objset=24 zio_object=0 zio_level=3 zio_blkid=0 bad_ranges=0000000000000400 bad_ranges_min_gap=8 bad_range_sets=0000079e bad_range_clears=00000854 bad_set_histogram=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 bad_cleared_histogram=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 time=00000016806457270000000323406839 eid=458
```
New format:
```
class=ereport.fs.zfs.checksum ena=96599319807790081 pool=testpool.1933 pool_guid=1236902063710799041 pool_state=0 pool_context=0 pool_failmode=wait vdev_guid=2774253874431514999 vdev_type=file vdev_path=/tmp/kyua.6Temlq/2/work/file1.1933 vdev_ashift=9 vdev_complete_ts=92124283803 vdev_delta_ts=46670 vdev_read_errors=0 vdev_write_errors=0 vdev_cksum_errors=20 vdev_delays=0 parent_guid=8090931855087882905 parent_type=raidz vdev_spare_guids= zio_err=0 zio_flags=1048752 zio_stage=4194304 zio_pipeline=65011712 zio_delay=0 zio_timestamp=0 zio_delta=0 zio_priority=4 zio_offset=1028608 zio_size=512 zio_objset=0 zio_object=0 zio_level=0 zio_blkid=4 bad_ranges=0000000000000200 bad_ranges_min_gap=8 bad_range_sets=0000061f bad_range_clears=000001f4 bad_set_histogram=1719161c1c1c101618171a151a1a19161e1c171d1816161c191f1a18192117191c131d171b1613151a171419161a1b1319101b14171b18151e191a1b141a1c17 bad_cleared_histogram=06090a0808070a0b020609060506090a01090a050a0a0509070609080d050d0607080d060507080c04070807070a0608020c080c080908040808090a05090a07 time=00000016806477050000000604157480 eid=62
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Alan Somers <asomers@FreeBSD.org>
Sponsored-by: Axcient
Closes#14716
Linux kernel 6.3 changed a bunch of APIs to use the dedicated idmap
type for mounts (struct mnt_idmap), we need to detect these changes
and make zfs work with the new APIs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#14682
sha256-armv8.S and sha512-armv8.S need the same treatment as the sse
bits; removal of -mgeneral-regs-only from flags.
This fixes errors about requiring NEON, which is a difference in clang
vs. gcc treatment of -mgeneral-regs-only being specified on asm files.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes#14715
Run kmem_free() after zap_cursor_fini().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14702
Add missing machine/md_var.h to spl/sys/simd_aarch64.h and
spl/sys/simd_arm.h
In spl/sys/simd_x86.h, PCB_FPUNOSAVE exists only on amd64, use PCB_NPXNOSAVE
on i386
In FreeBSD sys/elf_common.h redefines AT_UID and AT_GID on FreeBSD, we need
a hack in vnode.h similar to Linux. sys/simd.h needs to be included early.
In zfs_freebsd_copy_file_range() we pass a (size_t *)lenp to
zfs_clone_range() that expects a (uint64_t *)
Allow compiling armv6 world by limiting ARM macros in sha256_impl.c and
sha512_impl.c to __ARM_ARCH > 6
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Reviewed-by: Signed-off-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#14674
It was previously available only to FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Seagate Technology LLC
Closes#14718
It may happen that "wanted total ARC size" (wt) is negative, that was
expected. But multiplication product of it and unsigned fractions
result in unsigned value, incorrectly shifted right with a sing loss.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14692
The type def of writepage_t in kernel 6.3 is changed to take
struct folio* as the first argument. We need to detect this
change and pass correct function to write_cache_pages().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#14699
The kmem allocation in zfs_prune_aliases() will trigger a large
allocation warning on systems with 64K pages. Resolve this by
switching to vmem_alloc() which internally uses kvmalloc() so the
right allocator will be used based on the allocation size.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8491Closes#14694
Address the following bugs in persistent error log:
1) Check nested clones, eg "fs->snap->clone->snap2->clone2".
2) When deleting files containing error blocks in those clones (from
"clone" the example above), do not break the check chain.
3) When deleting files in the originating fs before syncing the errlog
to disk, do not break the check chain. This happens because at the
time of introducing the error block in the error list, we do not have
its birth txg and the head filesystem. If the original file is
deleted before the error list is synced to the error log (which is
when we actually lookup the birth txg and the head filesystem), then
we do not have access to this info anymore and break the check chain.
The most prominent change is related to achieving (3). We expand the
spa_error_entry_t structure to accommodate the newly introduced
zbookmark_err_phys_t structure (containing the birth txg of the error
block).Due to compatibility reasons we cannot remove the
zbookmark_phys_t structure and we also need to place the new structure
after se_avl, so it is not accounted for in avl_find(). Then we modify
spa_log_error() to also provide the birth txg of the error block. With
these changes in place we simplify the previously introduced function
get_head_and_birth_txg() (now named get_head_ds()).
We chose not to follow the same approach for the head filesystem (thus
completely removing get_head_ds()) to avoid introducing new lock
contentions.
The stack sizes of nested functions (as measured by checkstack.pl in the
linux kernel) are:
check_filesystem [zfs]: 272 (was 912)
check_clones [zfs]: 64
We also introduced two new tests covering the above changes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14633
Current autotrim causes short-lived txg through:
1. calling txg_wait_synced() in metaslab_enable()
2. calling txg_wait_open() with should_quiesce = true
This patch addresses all the issues mentioned above.
A new cv, vdev_autotrim_kick_cv is added to kick autotrim activity.
It will be signaled once a txg is synced so that it does not change
the original autotrim pace. Also because it is a cv, the wait is
interruptible which speeds up the vdev_autotrim_stop_wait() call.
Finally, combining big zfs_txg_timeout, txg_wait_open() also causes
delay when exporting a pool.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: jxdking <lostking2008@hotmail.com>
Issue #8993Closes#12194
Holding the zp->z_rangelock as a RL_READER over the range
0-UINT64_MAX is sufficient to prevent the dnode from being
re-dirtied by concurrent writers. To avoid potentially
looping multiple times for external caller which do not
take the rangelock holes are not reported after the first
sync. While not optimal this is always functionally correct.
This change adds the missing rangelock calls on FreeBSD to
zvol_cdev_ioctl().
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14512Closes#14641
This reverts commit 7d638df09b.
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#14678
zfsd fetches new pool configuration through ZFS_IOC_POOL_STATS but
it does not get updated nvlist configuration for spare vdev since
the configuration is read by spa_spares->sav_config. In this commit,
updating the vdev state for spare vdev that is consumed by zfsd on
spare disk hotplug.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14653
This is probably the uncontroversial part of #13631, which fixes
a real problem people are having.
There's still things to improve in our code after this is merged,
but it should stop the breakage that people have reported, where
we lie about a type always being aligned and then pass in stack
objects with no alignment requirement and hope for the best.
Of course, our SIMD code was written with unaligned accesses, so it
doesn't care if we drop this...but some auto-vectorized code that
gcc emits sure does, since we told it it can assume they're aligned.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#14649
There is a window in the slog removal code where a panic loop could
ensue if the system crashes during that operation. The original design
of slog removal did not persisted any state because the removal happened
synchronously. This was changed by a later commit which persisted the
vdev_removing flag and exposed this bug. If a slog removal is in
progress and happens to crash after persisting the vdev_removing flag to
the label but before the vdev is removed from the spa config, then the
pool will continue to panic on import. Here's a sample of the panic:
[ 134.387411] VERIFY0(0 == dmu_buf_hold_array(os, object, offset, size,
FALSE, FTAG, &numbufs, &dbp)) failed (0 == 22)
[ 134.393865] PANIC at dmu.c:1135:dmu_write()
[ 134.396035] Kernel panic - not syncing: VERIFY0(0 ==
dmu_buf_hold_array(os, object, offset, size, FALSE, FTAG, &numbufs,
&dbp)) failed (0 == 22)
[ 134.397857] CPU: 2 PID: 5914 Comm: txg_sync Kdump: loaded Tainted:
P OE 5.4.0-1100-dx2023020205-b3751f8c2-azure #106
[ 134.407938] Hardware name: Microsoft Corporation Virtual
Machine/Virtual Machine, BIOS 090008 12/07/2018
[ 134.407938] Call Trace:
[ 134.407938] dump_stack+0x57/0x6d
[ 134.407938] panic+0xfb/0x2d7
[ 134.407938] spl_panic+0xcf/0x102 [spl]
[ 134.407938] ? traverse_impl+0x1ca/0x420 [zfs]
[ 134.407938] ? dmu_object_alloc_impl+0x3b4/0x3c0 [zfs]
[ 134.407938] ? dnode_hold+0x1b/0x20 [zfs]
[ 134.407938] dmu_write+0xc3/0xd0 [zfs]
[ 134.407938] ? space_map_alloc+0x55/0x80 [zfs]
[ 134.407938] metaslab_sync+0x61a/0x830 [zfs]
[ 134.407938] ? queued_spin_unlock+0x9/0x10 [zfs]
[ 134.407938] vdev_sync+0x72/0x190 [zfs]
[ 134.407938] spa_sync_iterate_to_convergence+0x160/0x250 [zfs]
[ 134.407938] spa_sync+0x2f7/0x670 [zfs]
[ 134.407938] txg_sync_thread+0x22d/0x2d0 [zfs]
[ 134.407938] ? txg_dispatch_callbacks+0xf0/0xf0 [zfs]
[ 134.407938] thread_generic_wrapper+0x83/0xa0 [spl]
[ 134.407938] kthread+0x104/0x140
[ 134.407938] ? kasan_check_write.constprop.0+0x10/0x10 [spl]
[ 134.407938] ? kthread_park+0x90/0x90
[ 134.457802] ret_from_fork+0x1f/0x40
This change no longer persists the vdev_removing flag when removing slog
devices and also cleans up some code that was added which is not used.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#14652
When traversing a tree of block pointers (e.g. for `zfs destroy <fs>` or
`zfs send`), we prefetch the indirect blocks that will be needed, in
`traverse_prefetch_metadata()`. In the case of `zfs destroy <fs>`, we
do a little traversing each txg, and resume the traversal the next txg.
So the indirect blocks that will be needed, and thus are candidates for
prefetching, does not include blocks that are before the resume point.
The problem is that the logic for determining if the indirect blocks are
before the resume point is incorrect, causing the (up to 1024) L1
indirect blocks that are inside the first L2 to not be prefetched. In
practice, if we are able to read many more than 1024 blocks per txg,
then this will be inconsequential. But if i/o latency is more than a
few milliseconds, almost no L1's will be prefetched, so they will be
read serially, and thus the destroying will be very slow. This can be
observed as `zpool get freeing` decreasing very slowly.
Specifically: When we first examine the L2 that contains the block we'll
be resuming from, we have not yet resumed, so `td_resume` is nonzero.
At this point, all calls to `traverse_prefetch_metadata()` will fail,
even if the L1 in question is after the resume point. It isn't until
the callback is issued for the resume point that we zero out
`td_resume`, but by this point we've already attempted and failed to
prefetch everything under this L2 indirect block.
This commit addresses the issue by reusing the existing
`resume_skip_check()` to determine if the L1's bookmark is before or
after the resume point. To do so, this function is made non-mutating
(the caller now zeros `td_resume`).
Note, this bug likely predates (was not introduced by) #11803.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#14603
Undirty the dbuf and destroy its buffer when cloning into it.
Coverity ID: CID-1535375
Reported-by: Richard Yao
Reported-by: Benjamin Coddington
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14655
Constify some variables after d1807f168e.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#14656
Remove arc_reduce_target_size() call from arc_prune_task(). The idea
of arc_prune_task() is to remove external references on ARC metadata,
such as vnodes. Since arc_prune_async() is called only from ARC itself,
it makes no sense to create a parasitic loop between ARC eviction and
the pruning, treatening to drop ARC to its minimum. I can't guess why
it was added as part of FreeBSD to OpenZFS integration.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14639
031d7c2fe6 did not handle reverse
iteration, such that the original issue theoretically could still occur.
Note that contrary to the claim in the ZFS disk format specification
that a maximum of 6 levels are possible, 9 levels are possible with
recordsize=512 and and indirect block size of 16KB. In this unusual
configuration, span will be 65. The maximum size of span at 70 can be
reached at recordsize=16K and an indirect blocksize of 16KB.
When we are at this indirection level and are traversing backward, the
minimum value is start, but we cannot calculate that with 64-bit
arithmetic, so we avoid the calculation and instead rely on the earlier
statement that did `*offset = start;`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1466214)
Closes#14618
CpaDcRqResults have to be initialized with checksum=1 for adler32.
Otherwise when error CPA_DC_OVERFLOW occurred, the next compress
operation will continue on previously part-compressed data, and write
invalid checksum data. When zfs decompress the compressed data, a
invalid checksum will occurred and lead to #14463
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Weigang Li <weigang.li@intel.com>
Reviewed-by: Chengfei Zhu <chengfeix.zhu@intel.com>
Signed-off-by: naivekun <naivekun0817@gmail.com>
Closes#14632Closes#14463
This commit removes the edonr_byteorder.h file and all unused
variants of Edon-R.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13618
After addressing coverity complaints involving `nvpair_name()`, the
compiler started complaining about dropping const. This lead to a rabbit
hole where not only `nvpair_name()` needed to be constified, but also
`nvpair_value_string()`, `fnvpair_value_string()` and a few other static
functions, plus variable pointers throughout the code. The result became
a fairly big change, so it has been split out into its own patch.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14612
Clang's static analyzer complains about a possible NULL pointer
dereference in nvlist_lookup_nvpair_ei_sep() because it unconditionally
dereferences a pointer initialized by `nvpair_value_nvlist_array()`
under the assumption that `nvpair_value_nvlist_array()` will always
initialize the pointer without checking to see if an error was returned
to indicate otherwise. This itself is improper error handling, so we fix
it. However, fixing it to properly respond to errors is not enough to
avoid a NULL pointer dereference, since we can receive NULL when the
array is empty, so we also add a NULL check.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14612
Clang's static analyzer complains that nvs_xdr() and nvs_native()
functions return pointers to stack memory. That is technically true, but
the pointers are stored in stack memory from the caller's stack frame,
are not read by the caller and are deallocated when the caller returns,
so this is harmless. We set the pointers to NULL to silence the
warnings.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14612
Coverity reported a dereference after a NULL check in dbuf_verify(). If
`dn` is `NULL`, we can just assume that !dn->dn_free_txg, so we change
`!dn->dn_free_txg` to `(dn == NULL || !dn->dn_free_txg)`.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-992298)
Closes#14619
The commit replaces all findings of the link:
http://www.opensolaris.org/os/licensing with this one:
https://opensource.org/licenses/CDDL-1.0
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#14625
After 67a1b03791 was merged, coverity
started complaining about an uninitialized scalar variable in
flush_write_batch_impl() due to the new field zp.zp_brtwrite. Upon
inspection, it appears that uninitialized memory was being copied for
non-raw streams, so this is a pre-existing issue. The addition of
zp_brtwrite by the block cloning commit caused Coverity to begin to
notice it.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535378)
Closes#14607
da19d919a8 changed this in a way that
permits execution to reach `if (err == 0)` without initializing err.
This could randomly cause the sync task to not execute. We fix that by
initializing err to zero.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535377)
Closes#14607
`lseek(SEEK_DATA | SEEK_HOLE)` are only accurate when the on-disk blocks
reflect all writes, i.e. when there are no dirty data blocks. To ensure
this, if the target dnode is dirty, they wait for the open txg to be
synced, so we can call them "stabilizing operations". If they cause
txg_wait_synced often, it can be detrimental to performance.
Typically, a group of files are all modified, and then SEEK_DATA/HOLE
are performed on them. In this case, the first SEEK does a
txg_wait_synced(), and subsequent SEEKs don't need to wait, so
performance is good.
However, if a workload involves an interleaved metadata modification,
the subsequent SEEK may do a txg_wait_synced() unnecessarily. For
example, if we do a `read()` syscall to each file before we do its SEEK.
This applies even with `relatime=on`, when the `read()` is the first
read after the last write. The txg_wait_synced() is unnecessary because
the SEEK operations only care that the structure of the tree of indirect
and data blocks is up to date on disk. They don't care about metadata
like the contents of the bonus or spill blocks. (They also don't care
if an existing data block is modified, but this would be more involved
to filter out.)
This commit changes the behavior of SEEK_DATA/HOLE operations such that
they do not call txg_wait_synced() if there is only a pending change to
the bonus or spill block.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#13368
Issue #14594
Issue #14512
Issue #14009
Currently calls to kfpu_begin() and kfpu_end() are split between
the init() and fini() functions of the particular SIMD
implementation. This was done in #14247 as an optimization measure
for the ABD adapter. Unfortunately the split complicates FPU
handling on platforms that use a local FPU state buffer, like
Windows and macOS.
To ease porting, we introduce a boolean struct member in
fletcher_4_ops_t, indicating use of the FPU, and move the FPU state
handling from the SIMD implementations to the call sites.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#14600
Block Cloning allows to manually clone a file (or a subset of its
blocks) into another (or the same) file by just creating additional
references to the data blocks without copying the data itself.
Those references are kept in the Block Reference Tables (BRTs).
The whole design of block cloning is documented in module/zfs/brt.c.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#13392
The problem occurs because dmu_recv_begin pulls in the payload and
next header from the input stream in order to use the contents of
the begin record's nvlist. However, the change to do that before the
other checks in dmu_recv_begin occur caused a regression where an
empty send stream in a recursive send could have its END record
consumed by this, which broke the logic of recv_skip. A test is
also included to protect against this case in the future.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#12661Closes#14568
The txg_sync thread will see certain buffers in a DR_IN_DMU_SYNC state
when ZIL is writing them out. Then it waits until the state changes, but
has an assertion to check that they were not DR_NOT_OVERRIDDEN. If the
data write failed with an error, ZIL will put it into the
DR_NOT_OVERRIDDEN state. It looks like the code will handle that state
without an issue, so we can just delete the assertion.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Closes#14283
63652e1546 added unnecessary branches in
`vdev_stat_update()` to suppress an ASAN false positive the breaks
ztest. This had the downside of causing false positive reports in both
Coverity and Clang's static analyzer. vd is never NULL, so we add a
preprocessor check to only apply the workaround when compiling with ASAN
support.
Reported-by: Coverity (CID-1524583)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
ae7e700650 added an assertion to suppress
a complaint from Clang's static analyzer. Unfortunately, it missed
another way for Clang to complain about this function. This adds another
assertion to handle that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang Tidy reported this as a misc-redundant-expression because writing
`8` instead of `'8'` meant that the condition could never be true.
The only place where we have a chance of this being a bug would be in
nvlist_lookup_nvpair_ei_sep(). I am not sure if we ever pass an octal to
that, but if we ever do, it should work properly now instead of failing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer points out that if we fail to find an extended
attribute directory, but somehow find it when calculating delete_now and
delete_now is true, we will have a NULL pointer dereference when we try
to unlink the extended attribute directory.
I am not sure if this is possible, but if it is, I do not see a sane way
of handling this other than rolling back the transaction and retrying.
For now, let us do an VERIFY_IMPLY(). If this trips, it will stop the
transaction from committing, which will prevent an attribute directory
leak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
A CodeChecker report from Clang's CTU analysis indicated that we were
assigning uninitialized values in crypto_create_ctx_template() when we
call it from zio_crypt_key_init(). This occurs because the ->cm_param
and ->cm_param_len fields are uninitialized. Thankfully, the
uninitialized values are only used in the skein via
KCF_PROV_CREATE_CTX_TEMPLATE() -> skein_create_ctx_template() ->
skein_mac_ctx_build() -> skein_get_digest_bitlen(), but that should not
be called from here. We fix this to avoid a possible trap should this
code change in the future.
The FreeBSD version of zio_crypt_key_init() is unaffected.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
scan-build does not do cross translation unit analysis to realize that
`dmu_buf_hold()` will always set `bpo->bpo_cached_dbuf` to a non-NULL
pointer, so we add an assertion to make it realize this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer reports that if we try to rename a root dataset
in `dsl_dir_rename_sync()`, we will have a NULL pointer passed to
strlcpy(). This is impossible because `dsl_dir_rename_check()` will
prevent us from doing this. We add an assertion to silence this warning.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
CodeQL's cpp/constant-comparison query from its security-and-extended
query set reported 4 instances where we have comparions that always
evaluate the same way.
In `draid_config_by_type()`, we have an early `if (nparity == 0)` check
that returns `EINVAL`, making a later `if (nparity == 0 || nparity >
VDEV_DRAID_MAXPARITY)` partially redundant. The later check prints an
error message when parity is 0, but the early check does not. This is
not useful feedback, so we move the later check to the place where the
early check runs to replace the early check.
In `perform_thread_merge()`, we return when `num_threads == 0`. After
that block, we do `if (num_threads > 0) {`, which will always be true.
We remove the `if` statement.
In `sa_modify_attrs()`, we have a loop condition that is `k != 2`, but
at the end of the loop, we have `if (k == 0 && hdl->sa_spill)` followed
by an else that does a break. The result is that k != 2 will never be
evaluated when it is false. We drop the comparison.
In `zap_leaf_array_read()`, we have a for loop condition that is `i <
ZAP_LEAF_ARRAY_BYTES && len > 0`. However, that loop itself is in a loop
that is `while (len > 0)` and while the value of len is decremented
inside the loop, when `len == 0`, it will return, such that `len > 0`
inside the loop condition will always be true. We drop that part of the
condition.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer reports that if a `blkid == DMU_SPILL_BLKID` is
passed, then we can have a NULL pointer dereference when either
->dn_have_spill or `DNODE_FLAG_SPILL_BLKPTR` is not set. This should not
happen. We add an `ASSERT()` to suppress reports about NULL pointer
dereferences.
Originally, I wanted to use one or two IMPLY statements on
pre-conditions before the call to `dbuf_findbp()`, but Clang's static
analyzer did not understand it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer pointed out that we can have a NULL pointer
dereference if we ever attempt to split a vdev that has only 1 child. If
that happens, we are left with zero children, but then try to access a
non-existent child. Calling vdev_split() on a vdev with only 1 child
should be impossible due to how the code is structured. If this ever
happens, it would be best to stop execution immediately even in a
production environment to allow for the best possible chance of recovery
by an expert, so we use `VERIFY3U()` instead of `ASSERT3U()`.
Unfortunately, while that defensive assertion will prevent execution
from ever reaching the NULL pointer dereference, Clang's static analyzer
does not realize that, so we add an `ASSERT()` to inform it of this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
This has been filed as llvm/llvm-project#60694. Switching from a copy
through a C pointer dereference to an explicit memcpy() is a workaround
that prevents a false positive.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Clang's static analyzer reports a possible NULL pointer dereference in
abd_get_size() when called from vdev_draid_map_alloc_write() called from
vdev_draid_map_alloc_row() and vdc->vdc_nparity == 0. This should be
impossible, so we add an assertion to silence the defect report.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14575
Traditionally ARC adaptation was limited to MRU/MFU distribution. But
for years people with metadata-centric workload demanded mechanisms to
also manage data/metadata distribution, that in original ZFS was just
a FIFO. As result ZFS effectively got separate states for data and
metadata, minimum and maximum metadata limits etc, but it all required
manual tuning, was not adaptive and in its heart remained a bad FIFO.
This change removes most of existing eviction logic, rewriting it from
scratch. This makes MRU/MFU adaptation individual for data and meta-
data, same as the distribution between data and metadata themselves.
Since most of required states separation was already done, it only
required to make arcs_size state field specific per data/metadata.
The adaptation logic is still based on previous concept of ghost hits,
just now it balances ARC capacity between 4 states: MRU data, MRU
metadata, MFU data and MFU metadata. To simplify arc_c changes instead
of arc_p measured in bytes, this code uses 3 variable arc_meta, arc_pd
and arc_pm, representing ARC balance between metadata and data, MRU and
MFU for data, and MRU and MFU for metadata respectively as 32-bit fixed
point fractions. Since we care about the math result only when need to
evict, this moves all the logic from arc_adapt() to arc_evict(), that
reduces per-block overhead, since per-block operations are limited to
stats collection, now moved from arc_adapt() to arc_access() and using
cheaper wmsums. This also allows to remove ugly ARC_HDR_DO_ADAPT flag
from many places.
This change also removes number of metadata specific tunables, part of
which were actually not functioning correctly, since not all metadata
are equal and some (like L2ARC headers) are not really evictable.
Instead it introduced single opaque knob zfs_arc_meta_balance, tuning
ARC's reaction on ghost hits, allowing administrator give more or less
preference to metadata without setting strict limits.
Some of old code parts like arc_evict_meta() are just removed, because
since introduction of ABD ARC they really make no sense: only headers
referenced by small number of buffers are not evictable, and they are
really not evictable no matter what this code do. Instead just call
arc_prune_async() if too much metadata appear not evictable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14359
gmac_init_ctx() duplicates most of the code in gcm_int_ctx() while
it just needs to set its own IV length and AAD tag length.
Introduce gcm_init_ctx_impl() which handles the GCM and GMAC
differences while reusing the duplicated code.
While here, fix a flaw where the AVX implementation would accept a
context using a byte swapped key schedule which it could not
handle. Also constify the IV and AAD pointers passed to
gcm_init{,_avx}().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#14529
Otherwise, we can get a deadlock that looks like this:
1. fsync() grabs spa_config_enter(zilog->zl_spa, SCL_STATE, lwb,
RW_READER) as part of zil_lwb_write_issue() . It then blocks on the
txg_sync when a flush fails from a drive power cycling.
2. The txg_sync then blocks on the pool suspending due to the loss of
too many disks.
3. zpool clear then blocks on spa_config_enter(spa, SCL_STATE |
SCL_L2ARC | SCL_ZIO, spa, RW_WRITER) because it is a writer.
The disks cannot be brought online due to fsync() holding that lock and
the user gets upset since fsync() is uninterruptibly blocked inside the
kernel.
We need to grab the lock for vdev_lookup_top(), but we do not need to
hold it while there is outstanding IO.
This fixes a regression introduced by
1ce23dcaff.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Closes#14519
The intent is that this is like ENOTSUP, but specifically for when
something can't be done because we have no support for the requested
crypto parameters; eg unlocking a dataset or receiving a stream
encrypted with a suite we don't support.
Its not intended to be recoverable without upgrading ZFS itself.
If the request could be made to work by enabling a feature or modifying
some other configuration item, then some other code should be used.
load-key: In the future we might have more crypto suites (ie new values
for the `encryption` property. Right now trying to load a key on such
a future crypto suite will look up suite parameters off the end of the
crypto table, resulting in misbehaviour and/or crashes (or, with debug
enabled, trip the assertion in `zio_crypt_key_unwrap`).
Instead, lets check the value we got from the dataset, and if we can't
handle it, abort early.
recv: When receiving a raw stream encrypted with an unknown crypto
suite, `zfs recv` would report a generic `invalid backup stream`
(EINVAL). While technically correct, its not super helpful, so lets
ship a more specific error code and message.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#14577
The assert is enabled when DEBUG_VFS_LOCKS kernel option is set.
The exact panic is:
panic: condition seqc_in_modify(_vp->v_seqc) not met
It happens because seqc protocol is not followed for ZIL replay.
But we actually do not need to make any namecache calls at that stage,
because the namecache use is not enabled until after the replay is
completed.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes#14566
An IBM POWER7 system with Power ISA 2.06 tried to execute
zfs_sha256_power8() - which should only be run on ISA 2.07
machines.
The detection is implemented via the zfs_isa207_available() call,
but this check was not used.
This pull request will fix this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Low-power <msl0000023508@gmail.com>
Closes#14576
This is needed because of a possible error path where zfs_vnode_forget()
is called. That function calls vgone() and vput(), the former requires
the vnode to be exclusively locked and the latter expects it to be
locked.
It should be safe to lock the vnode as early as possible because it is
not yet visible, so there is no interaction with other locks.
While here, remove a tautological assignment to 'vp'.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes#14565
by placing the most common use case (no special vdevs) first and avoid
allocating new variables.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14494Closes#14563
dc5c8006f6 was recently merged to prefetch
up to 128 deadlists. Unfortunately, a loop was missing an increment,
such that it will prefetch all deadlists. The performance properties of
that patch probably should be re-evaluated.
This was caught by CodeQL's cpp/constant-comparison check in an
experimental branch where I am testing the security-and-extended
queries. It complained about the `i < 128` part of the loop condition
always evaluating to the same thing. The standard CodeQL configuration
we use missed this because it does not include that check.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14573
The recent 4c5fec01a4 commit caused
Coverity to report that ASSERT3U(algotype, >=, SHA256_MECH_INFO_TYPE);
is always true. That is because the signed algotype and signed
SHA256_MECH_INFO_TYPE values were cast to unsigned types. To fix this,
we switch the assertions to use ASSERT3S(), which retains the signedness
of the original values for the comparison.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535300)
Closes#14573
Make sure all SHA2 transform function has wrappers
For ASMABI to work, it is required the calling convention
is consistent.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Joergen Lundman <lundman@lundman.net>
Closes#14569
- instead of ".section .rodata" we should use SECTION_STATIC
Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13741
This commit changes the BLAKE3 implementation handling and
also the calls to it from the ztest command.
Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13741
The skeleton file module/icp/include/generic_impl.c can be used for
iterating over different implementations of algorithms.
It is used by SHA256, SHA512 and BLAKE3 currently.
The Solaris SHA2 implementation got replaced with a version which is
based on public domain code of cppcrypto v0.10.
These assembly files are taken from current openssl master:
- sha256-x86_64.S: x64, SSSE3, AVX, AVX2, SHA-NI (x86_64)
- sha512-x86_64.S: x64, AVX, AVX2 (x86_64)
- sha256-armv7.S: ARMv7, NEON, ARMv8-CE (arm)
- sha512-armv7.S: ARMv7, NEON (arm)
- sha256-armv8.S: ARMv7, NEON, ARMv8-CE (aarch64)
- sha512-armv8.S: ARMv7, ARMv8-CE (aarch64)
- sha256-ppc.S: Generic PPC64 LE/BE (ppc64)
- sha512-ppc.S: Generic PPC64 LE/BE (ppc64)
- sha256-p8.S: Power8 ISA Version 2.07 LE/BE (ppc64)
- sha512-p8.S: Power8 ISA Version 2.07 LE/BE (ppc64)
Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13741
We had three sha2.h headers in different places.
The FreeBSD version, the Linux version and the generic solaris version.
The only assembly used for acceleration was some old x86-64 openssl
implementation for sha256 within the icp module.
For FreeBSD the whole SHA2 files of FreeBSD were copied into OpenZFS,
these files got removed also.
Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13741
With some pathological access patterns it is possible to make ZFS
accumulate almost unlimited amount of speculative prefetch ZIOs.
Combined with linear ABD allocations in RAIDZ code, it appears to
be possible to exhaust system KVA, triggering kernel panic.
Address this by introducing a system-wide counter of active prefetch
requests and blocking prefetch distance doubling per stream hits if
the number of active requests is higher that ~6% of ARC size.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14516
openzfsonwindows/openzfs#206 found that it is possible to trip
`VERIFY(list_is_empty(&lwb->lwb_itxs))` when a `zil_commit()` is delayed
by the scheduler long enough for a parallel `zil_suspend()` operation to
exit `zil_commit_impl()`. This is a data race. To prevent this, we
introduce a `zilog->zl_suspend_lock` rwlock to ensure that all
outstanding `zil_commit()` operations finish before `zil_suspend()`
begins and that subsequent operations fallback to `txg_wait_synced()`
after `zil_suspend()` has begun.
On `PREEMPT_RT` Linux kernels, the `rw_enter()` implementation suffers
from writer starvation. This means that a ZIL intensive system can delay
`zil_suspend()` indefinitely. This is a pre-existing problem that
affects everything that uses rw locks, so it needs to be addressed in
the SPL. However, builds against `PREEMPT_RT` Linux kernels are
currently broken due to a GPL symbol issue (#11097), so we can safely
disregard that issue for now.
Reported-by: Arun KV <arun.kv@datacore.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14514
I forgot to remove the corresponding kmem_free() from zfs_kmod_fini() in
9a14ce43c3. Clang's static analyzer did
not complain, but the Coverity scan that was run after the patch was
merged did.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535275)
Closes#14556
After 89cd2197b9 was merged, Clang's
static analyzer began complaining about a dead assignment in
`zfs_fillpage()`. Upon inspection, I noticed that the dead assignment
was because we are not using the calculated io_len that we should use to
avoid asking the DMU to read past the end of a file. This should result
in `dmu_buf_hold_array_by_dnode()` calling `zfs_panic_recover()`.
This issue predates 89cd2197b9, but its
simplification of zfs_fillpage() eliminated the only use of the
assignment to io_len, which made Clang's static analyzer complain about
the issue.
Also, as a precaution, we add an assertion that io_offset < i_size. If
this ever fails, bad things will happen. Otherwise, we are blindly
trusting the kernel not to give us invalid offsets. We continue to
blindly trust it on non-debug kernels.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14534
We tripped `ASSERT(error == ENOENT || error == EEXIST || error ==
EALREADY)` in `zil_lwb_commit()` at Klara when doing robustness testing
of ZIL against drive power cycles.
That assertion presumably exists because when this code was written, the
only errors expected from here were EIO, ENOENT, EEXIST and EALREADY,
with EIO having its own handling before the assertion. However, upon
doing a manual depth first search traversal of the source tree, it turns
out that a large number of unexpected errors are possible here. In
theory, EINVAL and ENOSPC can come from dnode_hold_impl(). However, most
unexpected errors originate in the block layer and come to us from
zio_wait() in various ways. One way is ->zl_get_data() -> dmu_buf_hold()
-> dbuf_read() -> zio_wait().
From vdev_disk.c on Linux alone, zio_wait() can return the unexpected
errors ENXIO, ENOTSUP, EOPNOTSUPP, ETIMEDOUT, ENOSPC, ENOLINK,
EREMOTEIO, EBADE, ENODATA, EILSEQ and ENOMEM
This was only observed after what have been likely over 1000 test
iterations, so we do not expect to reproduce this again to find out what
the error code was. However, circumstantial evidence suggests that the
error was ENXIO.
When ENXIO or any other unexpected error occurs, the `fsync()` or
equivalent operation that called zil_commit() will return success, when
in fact, dirty data has not been committed to stable storage. This is a
violation of the Single UNIX Specification.
The code should be able to handle this and any other unknown error by
calling `txg_wait_synced()`. In addition to changing the code to call
txg_wait_synced() on unexpected errors instead of returning, we modify
it to print information about unexpected errors to dmesg.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Closes#14532
xxhash.c was not being compiled, so when FreeBSD's kernel
switched to a newer version of ZSTD a few weeks ago, out-of-tree ZFS
failed to build
Sync module/Makefile.bsd with FreeBSD's sys/modules/zfs/Makefile
And restore the alphabetical sort in a number of places
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-by: Klara, Inc.
Closes#14508
Clang's static analyzer claims that dereferencing ds in
dmu_objset_create_impl_dnstats() could cause a NULL pointer dereference
when a previous NULL check confirms that it is NULL. It is only NULL on
the MOS, for which dmu_objset_userused_enabled(os) should always return
false, so ds will never be dereferenced when it is NULL. We add an
assertion to suppress this warning.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14470
Clang's static analyzer claims that dbuf_hold_copy() will have a NULL
pointer dereference in data->b_data when called by dbuf_hold_impl().
This is impossible because data is dr->dt.dl.dr_data, which is non-NULL
whenever db->db_level == 0, which is always the case whenever
dbuf_hold_impl() calls dbuf_hold_copy(). We add an assertion to suppress
the complaint.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14470
This avoids a call to kmem_alloc() during module load. It also
suppresses a defect report from Clang's static analyzer that claims that
we will have a NULL pointer dereference in zfsdev_state_init() because
it does not understand that this has already been allocated in
zfs_kmod_init().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14470
Clang's static analyzer points out that when IS_SA_BONUSTYPE(type) is
true and .sa_length is 0 for an attribute, we have a NULL pointer
dereference. We suppress this with an IMPLY() statement.
This was also identified by Coverity.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1017954)
Closes#14470
Clang's static analyzer informs us of multiple NULL pointer dereferences
involving zio_checksum_error_impl().
The first is a NULL pointer dereference if bp is NULL and ci->ci_flags &
ZCHECKSUM_FLAG_EMBEDDED is false, but bp is NULL implies that
ci->ci_flags & ZCHECKSUM_FLAG_EMBEDDED is true, so we add an IMPLY()
statement to suppress the report.
The second and third are identical, and are duplicated because while the
NULL pointer dereference occurs in zio_checksum_gang_verifier(), it is
called by zio_checksum_error_impl() and there is a report for each of
the two functions. The reports state that when bp is NULL, ci->ci_flags
& ZCHECKSUM_FLAG_EMBEDDED is true and checksum is not
ZIO_CHECKSUM_LABEL, we also have a NULL pointer dereference. bp is NULL
should imply that checksum == ZIO_CHECKSUM_LABEL, so we add an IMPLY()
statement to suppress the second report. The two reports are
functionally identical.
A fourth variation of this was also reported by Coverity. It occurs when
checksum == ZIO_CHECKSUM_ZILOG2.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1524672)
Closes#14470
The recently merged f58e513f74 was
intended to zero sensitive data before exit from encryption
functions to harden the code against theoretical information
leaks. Unfortunately, the method by which it did that is
optimized away by the compiler, so some information still leaks. This
was confirmed by counting function calls in disassembly.
After studying how the OpenBSD, FreeBSD and Linux kernels handle this,
and looking at our disassembly, I decided on a two-factor approach to
protect us from compiler dead store elimination passes.
The first factor is to stop trying to inline gcm_clear_ctx(). GCC does
not actually inline it in the first place, and testing suggests that
dead store elimination passes appear to become more powerful in a bad
way when inlining is forced, so we recognize that and move
gcm_clear_ctx() to a C file.
The second factor is to implement an explicit_memset() function based on
the technique used by `secure_zero_memory()` in FreeBSD's blake2
implementation, which coincidentally is functionally identical to the
one used by Linux. The source for this appears to be a LLVM bug:
https://llvm.org/bugs/show_bug.cgi?id=15495
Unlike both FreeBSD and Linux, we explicitly avoid the inline keyword,
based on my observations that GCC's dead store elimination pass becomes
more powerful when inlining is forced, under the assumption that it will
be equally powerful when the compiler does decide to inline function
calls.
Disassembly of GCC's output confirms that all 6 memset() calls are
executed with this patch applied.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14544
Commit 34ce4c4 made zfeature_active() non-static. This is not required.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14546
During a mount, zpl_mount_impl(), uses sget() with the callback
zpl_test_super() to find a super_block with a matching objset,
stored in z_os. It does so without taking the teardown lock on
the zfsvfs.
The problem is that operations like rollback will replace the
z_os. And, there is a window where the objset in the rollback
is freed, but z_os still points to it. Then, a mount like
operation, for instance a clone, can reallocate that exact same
pointer and zpl_test_super() will then match the super_block
associated with the rollback as opposed to the clone.
This fix tests for a match and if so, takes the teardown lock
before doing the final match test.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Poduska <jpoduska@datto.com>
Closes#14518
Hole detection in the zio compression code allows us to
opportunistically skip compression on holes. We can go a step further
by not doing memory allocations on holes either.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-by: Wasabi Technology, Inc.
Closes#14500
Currently the temporary buffer in which decryption takes place
isn't cleared on context destruction. Further in some routines we
fail to call gcm_clear_ctx() on error exit. Both flaws may result
in leaking sensitive data.
We follow best practices and zero out the plaintext buffer before
freeing the memory holding it. Also move all cleanup into
gcm_clear_ctx() and call it on any context destruction.
The performance impact should be negligible.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#14528
In the case of a regular compilation, the compiler
raises a warning for a dsl_deadlist_merge function, that
the stack size is to large. In debug build this can
generate an error.
Move large structures to heap.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#14524
Otherwise the dataset may be freed after the last dmu_buf_rele() leading
to a panic.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14522Closes#14523
When a page is faulted in for memory mapped I/O the page lock
may be dropped before it has been read and marked up to date.
If a buffered read encounters such a page in mappedread() it
must wait until the page has been updated. Failure to do so
will result in a panic on debug builds and incorrect data on
production builds.
The critical part of this change is in mappedread() where pages
which are not up to date are now handled. Additionally, it
includes the following simplifications.
- zfs_getpage() and zfs_fillpage() could be passed an array of
pages. This could be more efficient if it was used but in
practice only a single page was ever provided. These
interfaces were simplified to acknowledge that.
- update_pages() was modified to correctly set the PG_error bit
on a page when it cannot be read by dmu_read().
- Setting PG_error and PG_uptodate was moved to zfs_fillpage()
from zpl_readpage_common(). This is consistent with the
handling in update_pages() and mappedread().
- Minor additional refactoring to comments and variable
declarations to improve readability.
- Add a test case to exercise concurrent buffered, direct,
and mmap IO to the same file.
- Reduce the mmap_sync test case default run time.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13608Closes#14498
Clang's static analyzer correctly identified a NULL pointer dereference
in zio_ready() when ZIO_FLAG_NODATA has been set on a zio that is
missing a block pointer. The NULL pointer dereference occurs because we
have logic intended to disable ZIO_FLAG_NODATA when it has been set on a
gang block.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14469
When dn->dn_bonus == NULL, dmu_bonus_hold_by_dnode() will unlock its
read lock on dn->dn_struct_rwlock and grab a write lock. This can be
micro-optimized by calling rw_tryupgrade().
Linux will not benefit from this since it does not support rwlock
upgrades, but FreeBSD will.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14517
Under certain loads, the following panic is hit:
panic: page fault
KDB: stack backtrace:
#0 0xffffffff805db025 at kdb_backtrace+0x65
#1 0xffffffff8058e86f at vpanic+0x17f
#2 0xffffffff8058e6e3 at panic+0x43
#3 0xffffffff808adc15 at trap_fatal+0x385
#4 0xffffffff808adc6f at trap_pfault+0x4f
#5 0xffffffff80886da8 at calltrap+0x8
#6 0xffffffff80669186 at vgonel+0x186
#7 0xffffffff80669841 at vgone+0x31
#8 0xffffffff8065806d at vfs_hash_insert+0x26d
#9 0xffffffff81a39069 at sfs_vgetx+0x149
#10 0xffffffff81a39c54 at zfsctl_snapdir_lookup+0x1e4
#11 0xffffffff8065a28c at lookup+0x45c
#12 0xffffffff806594b9 at namei+0x259
#13 0xffffffff80676a33 at kern_statat+0xf3
#14 0xffffffff8067712f at sys_fstatat+0x2f
#15 0xffffffff808ae50c at amd64_syscall+0x10c
#16 0xffffffff808876bb at fast_syscall_common+0xf8
The page fault occurs because vgonel() will call VOP_CLOSE() for active
vnodes. For this reason, define vop_close for zfsctl_ops_snapshot. While
here, define vop_open for consistency.
After adding the necessary vop, the bug progresses to the following
panic:
panic: VERIFY3(vrecycle(vp) == 1) failed (0 == 1)
cpuid = 17
KDB: stack backtrace:
#0 0xffffffff805e29c5 at kdb_backtrace+0x65
#1 0xffffffff8059620f at vpanic+0x17f
#2 0xffffffff81a27f4a at spl_panic+0x3a
#3 0xffffffff81a3a4d0 at zfsctl_snapshot_inactive+0x40
#4 0xffffffff8066fdee at vinactivef+0xde
#5 0xffffffff80670b8a at vgonel+0x1ea
#6 0xffffffff806711e1 at vgone+0x31
#7 0xffffffff8065fa0d at vfs_hash_insert+0x26d
#8 0xffffffff81a39069 at sfs_vgetx+0x149
#9 0xffffffff81a39c54 at zfsctl_snapdir_lookup+0x1e4
#10 0xffffffff80661c2c at lookup+0x45c
#11 0xffffffff80660e59 at namei+0x259
#12 0xffffffff8067e3d3 at kern_statat+0xf3
#13 0xffffffff8067eacf at sys_fstatat+0x2f
#14 0xffffffff808b5ecc at amd64_syscall+0x10c
#15 0xffffffff8088f07b at fast_syscall_common+0xf8
This is caused by a race condition that can occur when allocating a new
vnode and adding that vnode to the vfs hash. If the newly created vnode
loses the race when being inserted into the vfs hash, it will not be
recycled as its usecount is greater than zero, hitting the above
assertion.
Fix this by dropping the assertion.
FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252700
Reviewed-by: Andriy Gapon <avg@FreeBSD.org>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Co-authored-by: Rob Wing <rob.wing@klarasystems.com>
Submitted-by: Klara, Inc.
Sponsored-by: rsync.net
Closes#14501
When jail.conf set the nopersist flag during startup, it was
incorrectly destroying the per-jail ZFS settings.
Reported-by: Martin Matuska <mm@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-by: Modirum MDPay
Sponsored-by: Klara, Inc.
Closes#14509
With commit 34ce4c42f applied, there is no need for eee9362a7.
Revert that aside from the test. All tests introduced in those commits
pass.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14502
spa_sync() currently grabs the write lock due to an old hack that is
documented by a comment:
We need the write lock here because, for aux vdevs,
calling vdev_config_dirty() modifies sav_config.
This is ugly and will become unnecessary when we
eliminate the aux vdev wart by integrating all vdevs
into the root vdev tree.
This has lead to deadlocks in rare edge cases from holding the write
lock. We can reduce incidence of these deadlocks by not grabbing the
write lock on pools without auxillary vdevs.
Sponsored-By: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Closes#14282
Add handling to dmu_object_next for the case where *objectp == 0.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#14479
Clang's static analyzer incorrectly complains about an undefined value
here when lr->lr_common.lrc_txtype == TX_SYMLINK and txtype ==
TX_CREATE. This is impossible, because of this line:
txtype = (lr->lr_common.lrc_txtype & ~TX_CI((uint64_t)0x1 << 63));
Changing the code to compare against txtype suppresses the report.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14472
As of the 4.13 kernel filemap_range_has_page() can be used to
check if there is a page mapped in a given file range. When
available this interface should be used which eliminates the
need for the zp->z_is_mapped boolean.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14493
strlcat() is supposed to be given the length of the destination buffer,
including the existing contents. Unfortunately, I had been overzealous
when I wrote a51288aabb, since I gave it
the length of the destination buffer, minus the existing contents. This
likely caused a regression on large strings.
On the topic of being overzealous, the use of strlcat() in
dmu_send_estimate_fast() was unnecessary because recv_clone_name is a
fixed length string. We continue using strlcat() mostly as defensive
programming, in case the string length is ever changed, even though it
is unnecessary.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14476
Unfortunately, even after e79b6807, I still, much more rarely,
tripped asserts when playing with many ctldir mounts at once.
Since this appears to happen if we dispatched twice too fast, just
ignore it. We don't actually need to do anything if someone already
started doing it for us.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#14462
The zio returned from arc_write() in dmu_objset_sync() uses
zio_nowait(). However we may reach the end of dsl_dataset_sync()
which checks if we need to activate features in the filesystem
without knowing if that zio has even run through the ZIO pipeline yet.
In that case we will flag features to be activated in
dsl_dataset_block_born() but dsl_dataset_sync() has already
completed its run and those features will not actually be activated.
Mitigate this by moving the feature activation code in
dsl_dataset_sync_done(). Also add new ASSERTs in
dsl_scan_visitbp() checking if a block contradicts any filesystem
flags.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#13816
We've had cases where we trigger an OOM despite having memory freely
available on the system. For example, here, we had about 21GB free:
kernel: Node 0 Normal: 2418758*4kB (UME) 1549533*8kB (UE) 0*16kB
0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB =
22071296kB
The problem being, all the memory is in 4K and 8K contiguous regions,
but the allocation request was for a 16K contiguous region:
kernel: SafeExecutors-4 invoked oom-killer:
gfp_mask=0x42dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_COMP|__GFP_ZERO),
order=2, oom_score_adj=0
The offending allocation came from this call trace:
kernel: Call Trace:
kernel: dump_stack+0x57/0x7a
kernel: dump_header+0x4f/0x1e1
kernel: oom_kill_process.cold.33+0xb/0x10
kernel: out_of_memory+0x1ad/0x490
kernel: __alloc_pages_slowpath+0xd55/0xe40
kernel: __alloc_pages_nodemask+0x2df/0x330
kernel: kmalloc_large_node+0x42/0x90
kernel: __kmalloc_node+0x25a/0x320
kernel: ? spl_kmem_free_impl+0x21/0x30 [spl]
kernel: spl_kmem_alloc_impl+0xa5/0x100 [spl]
kernel: spl_kmem_zalloc+0x19/0x20 [spl]
kernel: zfsdev_ioctl+0x2b/0xe0 [zfs]
kernel: do_vfs_ioctl+0xa9/0x640
kernel: ? __audit_syscall_entry+0xdd/0x130
kernel: ksys_ioctl+0x67/0x90
kernel: __x64_sys_ioctl+0x1a/0x20
kernel: do_syscall_64+0x5e/0x200
kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
kernel: RIP: 0033:0x7fdca3674317
The problem is, for each ioctl that ZFS makes, it has to allocate a
zfs_cmd_t structure, which is 13744 bytes in size (on my system):
sdb> sizeof zfs_cmd
(size_t)13744
This size, coupled with the fact that we currently allocate it with
kmem_zalloc, means we need a 16K contiguous region of memory to satisfy
the request.
The solution taken by this change, is to use "vmem" instead of "kmem" to
do the allocation, such that we don't necessarily need a contiguous 16K
memory region to satisfy the allocation.
Arguably, a better solution would be not to require such a large
allocation to begin with (e.g. reduce the size of the zfs_cmd_t
structure), but that'd be a much larger change than this "one liner".
Thus, I've opted for this approach for now; we can always circle back
and attempt to reduce the size of the structure in the future.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes#14474
Debugging reported NULL de-reference panic in dnode_hold_impl() I found
that for certain types of errors arc_read() may only return error code,
but not properly report it via done and pio arguments. Lack of done
calls may result in reference and/or memory leaks in higher level code.
Lack of error reporting via pio may result in unnoticed errors there.
For example, dbuf_read(), where dbuf_read_impl() ignores arc_read()
return, relies completely on the pio mechanism and missed the errors.
This patch makes arc_read() to always call done callback and always
propagate errors to parent zio, if either is provided.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14454
Clang's static analyzer pointed out that if alloc_pages >= nr_pages
before the loop, the value of page will be undefined and will be used
anyway. This should not be possible, but as cleanup, we add an
assertion. We also recognize that the local variables should be unsigned
in the first place, so we make them unsigned. This is not enough to
avoid the need for the assertion, since there is still the case that
alloc_pages == nr_pages and nr_pages == 0, which the assertion
implicitly checks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14456
The PVS Studio 2016 FreeBSD kernel report stated:
\contrib\opensolaris\uts\common\fs\zfs\spa.c (1341): error V595: The 'spa->spa_spares.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1341, 1342.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1355): error V595: The 'spa->spa_l2cache.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1355, 1357.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1398): error V595: The 'spa->spa_spares.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1398, 1408.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1583): error V595: The 'oldvdevs' pointer was utilized before it was verified against nullptr. Check lines: 1583, 1595.
In practice, all of these uses were safe because a NULL pointer
implied a 0 vdev count, which kept us from iterating over vdevs.
However, rearranging the code to check the pointer first is not a
terrible micro-optimization and makes it more readable, so let us
do that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14456
`dsl_dir_activity_in_progress()` can call `zfs_get_temporary_prop()` with
the forth value set to NULL, which will pass NULL to `strcpy()` when
there is a match
Clang's static analyzer caught this with the help of CodeChecker for
Cross Translation Unit analysis.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14456
Encrypted blocks can not have 3 DVAs, because they use the space of the
3rd DVA for the IV+salt. zio_write_gang_block() takes this into
account, setting `gbh_copies` to no more than 2 in this case. Gang
members BP's do not have the X (encrypted) bit set (nor do they have the
DMU level and type fields set), because encryption is not handled at
this level. The gang block is reassembled, and then encryption (and
compression) are handled.
To check if this gang block is encrypted, the code in
zio_write_gang_block() checks `pio->io_bp`. This is normally fine,
because the block that's being ganged is typically the encrypted BP.
The problem is that if there is "recursive ganging", where a gang member
is itself a gang block, then when zio_write_gang_block() is called to
create a gang block for a gang member, `pio->io_bp` is the gang member's
BP, which doesn't have the X bit set, so the number of DVA's is not
restricted to 2. It should instead be looking at the the "gang leader",
i.e. the top-level gang block, to determine how many DVA's can be used,
to avoid a "NDVA's inversion" (where a child has more DVA's than its
parent).
gang leader BP: X (encrypted) bit set, 2 DVA's, IV+salt in 3rd DVA's
space:
```
DVA[0]=<1:...:100400> DVA[1]=<0:...:100400> salt=... iv=...
[L0 ZFS plain file] fletcher4 uncompressed encrypted LE
gang unique double size=100000L/100000P birth=... fill=1 cksum=...
```
leader's GBH contains a BP with gang bit set and 3 DVA's:
```
DVA[0]=<1:...:55600> DVA[1]=<0:...:55600>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
contiguous unique double size=55600L/55600P birth=... fill=0 cksum=...
DVA[0]=<1:...:55600> DVA[1]=<0:...:55600>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
contiguous unique double size=55600L/55600P birth=... fill=0 cksum=...
DVA[0]=<1:...:55600> DVA[1]=<0:...:55600> DVA[2]=<1:...:200>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
gang unique double size=55400L/55400P birth=... fill=0 cksum=...
```
On nondebug bits, having the 3rd DVA in the gang block works for the
most part, because it's true that all 3 DVA's are available in the gang
member BP (in the GBH). However, for accounting purposes, gang block
DVA's ASIZE include all the space allocated below them, i.e. the
512-byte gang block header (GBH) as well as the gang members below that.
We see that above where the gang leader BP is 1MB logical (and after
compression: 0x`100000P`), but the ASIZE of each DVA is 2 sectors (1KB)
more than 1MB (0x`100400`).
Since thre are 3 copies of a block below it, we increment the ATIME of
the 3rd DVA of the gang leader by the space used by the 3rd DVA of the
child (1 sector, in this case). But there isn't really a 3rd DVA of the
parent; the salt is stored in place of the 3rd DVA's ASIZE.
So when zio_write_gang_member_ready() increments the parent's BP's
`DVA[2]`'s ASIZE, it's actually incrementing the parent's salt. When we
later try to read the encrypted recursively-ganged block, the salt
doesn't match what we used to write it, so MAC verification fails and we
get an EIO.
```
zio_encrypt(): encrypted 515/2/0/403 salt: 25 25 bb 9d ad d6 cd 89
zio_decrypt(): decrypting 515/2/0/403 salt: 26 25 bb 9d ad d6 cd 89
```
This commit addresses the problem by not increasing the number of copies
of the GBH beyond 2 (even for non-encrypted blocks). This simplifies
the logic while maintaining the ability to traverse all metadata
(including gang blocks) even if one copy is lost. (Note that 3 copies
of the GBH will still be created if requested, e.g. for `copies=3` or
MOS blocks.) Additionally, the code that increments the parent's DVA's
ASIZE is made to check the parent DVA's NDVAS even on nondebug bits. So
if there's a similar bug in the future, it will cause a panic when
trying to write, rather than corrupting the parent BP and causing an
error when reading.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Caused-by: #14356Closes#14440Closes#14413
The remaining changes needed to make the assembly files work
with macOS.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#14451
Pull in d40f55cd950919d7eac951b122668e55e33e5202 from upstream
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14439
When testing distributed rebuild performance with more capable
hardware it was observed than increasing the zfs_rebuild_vdev_limit
to 64M reduced the rebuild time by 17%. Beyond 64MB there was
some improvement (~2%) but it was not significant when weighed
against the increased memory usage. Memory usage is capped at 1/4
of arc_c_max.
Additionally, vr_bytes_inflight_max has been moved so it's updated
per-metaslab to allow the size to be adjust while a rebuild is
running.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14428
For HDD based pools the default zfs_scan_vdev_limit of 4M
per-vdev can significantly limit the maximum scrub performance.
Increasing the default to 16M can double the scrub speed from
80 MB/s per disk to 160 MB/s per disk.
This does increase the memory footprint during scrub/resilver
but given the performance win this is a reasonable trade off.
Memory usage is capped at 1/4 of arc_c_max. Note that number
of outstanding I/Os has not changed and is still limited by
zfs_vdev_scrub_max_active.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14428
During snapshot deletion ZFS may issue several reads for each deadlist
to merge them into next snapshot's or pool's bpobj. Number of the dead
lists increases with number of snapshots. On HDD pools it may take
significant time during which sync thread is blocked.
This patch introduces prescient prefetch of required blocks for up to
128 deadlists ahead. Tests show reduction of time required to delete
dataset with 720 snapshots with randomly overwritten file on wide HDD
pool from 75-85 to 22-28 seconds.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Issue #14276Closes#14402
When resilvering the estimated time remaining is calculated using
the average issue rate over the current pass. Where the current
pass starts when a scan was started, or restarted, if the pool
was exported/imported.
For dRAID pools in particular this can result in wildly optimistic
estimates since the issue rate will be very high while scanning
when non-degraded regions of the pool are scanned. Once repair
I/O starts being issued performance drops to a realistic number
but the estimated performance is still significantly skewed.
To address this we redefine a pass such that it starts after a
scanning phase completes so the issue rate is more reflective of
recent performance. Additionally, the zfs_scan_report_txgs
module option can be set to reset the pass statistics more often.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14410
Linux 6.2 changes the second argument of the set_acl operation to be a
"struct dentry *" rather than a "struct inode *". The inode* parameter
is still available as dentry->d_inode, so adjust the call to the _impl
function call to dereference and pass that pointer to it.
Also document that the get_acl -> get_inode_acl member name change from
commit 884a693 was an API change also introduced in Linux 6.2.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#14415
Despite all optimizations, tests on actual hardware show that FreeBSD
kernel can't sleep for less then ~2us. Similar tests on Linux show
~50us delay at least from nanosleep() (haven't tested inside kernel).
It means that on very fast log device ZIL may not be able to satisfy
zfs_commit_timeout_pct block commit timeout, increasing log latency
more than desired.
Handle that by introduction of zil_min_commit_timeout parameter,
specifying minimal timeout value where additional delays to aggregate
writes may be skipped. Also skip delays if the LWB is more than 7/8
full, that often happens if I/O sizes are constant and match one of
LWB sizes. Both things are applied only if there were no already
outstanding log blocks, that may indicate single-threaded workload,
that by definition can not benefit from the commit delays.
While there, add short time moving average to zl_last_lwb_latency to
make it more stable.
Tests of single-threaded 4KB writes to NVDIMM SLOG on FreeBSD show IOPS
increase by 9% instead of expected 5%. For zfs_commit_timeout_pct of
1 there IOPS increase by 5.5% instead of expected 1%.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14418
The .align directive used to align storage locations is
ambiguous. On some platforms and assemblers it takes a byte count,
on others the argument is interpreted as a shift value. The current
usage expects the first interpretation.
Replace it with the unambiguous .balign directive which always
expects a byte count, regardless of platform and assembler.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#14422
The .size directive used by the SET_SIZE C macro uses the special
dot symbol to calculate the size of a function. The dot symbol
refers to the current address, so for the calculation to be
meaningful the SET_SIZE macro must be placed immediately after the
end of the function the size is calculated for.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#14422
If we receive a DRR_FREEOBJECTS as the first entry in an object range,
this might end up producing a hole if the freed objects were the
only existing objects in the block.
If the txg starts syncing before we've processed any following
DRR_OBJECT records, this leads to a possible race where the backing
arc_buf_t gets its psize set to 0 in the arc_write_ready() callback
while still being referenced from a dirty record in the open txg.
To prevent this, we insert a txg_wait_synced call if the first
record in the range was a DRR_FREEOBJECTS that actually
resulted in one or more freed objects.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Hedberg <david.hedberg@findity.com>
Sponsored by: Findity AB
Closes#11893Closes#14358
In the zstream code, Coverity reported:
"The argument could be controlled by an attacker, who could invoke the
function with arbitrary values (for example, a very high or negative
buffer size)."
It did not report this in the kernel. This is likely because the
userspace code stored this in an int before passing it into the
allocator, while the kernel code stored it in a uint32_t.
However, this did reveal a potentially real problem. On 32-bit systems
and systems with only 4GB of physical memory or less in general, it is
possible to pass a large enough value that the system will hang. Even
worse, on Linux systems, the kernel memory allocator is not able to
support allocations up to the maximum 4GB allocation size that this
allows.
This had already been limited in userspace to 64MB by
`ZFS_SENDRECV_MAX_NVLIST`, but we need a hard limit in the kernel to
protect systems. After some discussion, we settle on 256MB as a hard
upper limit. Attempting to receive a stream that requires more memory
than that will result in E2BIG being returned to user space.
Reported-by: Coverity (CID-1529836)
Reported-by: Coverity (CID-1529837)
Reported-by: Coverity (CID-1529838)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14285
Introduce four new vdev properties:
checksum_n
checksum_t
io_n
io_t
These properties can be used for configuring the thresholds of zed's
diagnosis engine and are interpeted as <N> events in T <seconds>.
When this property is set to a non-default value on a top-level vdev,
those thresholds will also apply to its leaf vdevs. This behavior can be
overridden by explicitly setting the property on the leaf vdev.
Note that, these properties do not persist across vdev replacement. For
this reason, it is advisable to set the property on the top-level vdev
instead of the leaf vdev.
The default values for zed's diagnosis engine (10 events, 600 seconds)
remains unchanged.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology LLC
Closes#13805
In 2016, the authors of PVS Studio ran it on the FreeBSD kernel, which
identified a number of bugs / cleanup opportunities in the FreeBSD ZFS kernel
code. A few of them persist to the present day:
https://reviews.freebsd.org/D5245
Note that the scan was done against
freebsd/freebsd-src@46763fd4ca.
In particular, we have the following in free_blocks():
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (174): error V547: Expression '__left >= __right' is always true. Unsigned type value is always >= 0.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (171): error V634: The priority of the '*' operation is higher than that of the '<<' operation. It's possible that parentheses should be used in the expression.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (175): error V547: Expression '__left >= __right' is always true. Unsigned type value is always >= 0.
A couple of assertions accidentally typecast the arguments they check to
unsigned in such a way that the result is always true. Also, parentheses
are missing around `1<<epbs` in `(db->db_blkid * 1<<epbs)`. This works
out to be okay due to multiplication not caring what order of operations
we use, but it is better to fix it to be `(db->db_blkid << epbs)`.
A few of the function local variables probably never should have been
32-bit in the first place, so we make them 64-bit. We also replace the
existing assertions with additional assertions to ensure that 64-bit
unsigned arithmetic is safe.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14407
When zfs_file_read returns error, resid may be uninitialized.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#14404
This is only ever used with unsigned data, so the type itself should be
unsigned. Also, PVS Studio's 2016 FreeBSD kernel report correctly
identified the following assertion as always being true, so we can drop
it:
ASSERT3U(dd->dd_space_towrite[i & TXG_MASK], >=, 0);
The reason it was always true is because it would do casts to give us
unsigned comparisons. This could have been fixed by switching to
`ASSERT3S()`, but upon inspection, it turned out that this variable
never should have been allowed to be signed in the first place.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14408
Use the saved property index instead of looking it up once per DSL
directory when traversing up towards the root.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Sponsored-by: The FreeBSD Foundation
Closes#14397
Reported-by: KMSAN
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Sponsored-by: The FreeBSD Foundation
Closes#14397
In original code, zfs_znode_dmu_fini is called in zfs_rmnode without
zfs_znode_hold_enter. It seems to assume it's ok to do so when the znode
is unlinked. However this assumption is not correct, as zfs_zget can be
called by NFS through zpl_fh_to_dentry as pointed out by Christian in
https://github.com/openzfs/zfs/pull/12767, which could result in a
use-after-free bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#12767Closes#14364
Add new macro ASMABI used by Windows to change
calling API to "sysv_abi".
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#14228
I recently gained the ability to run Clang's static analyzer on the
linux kernel modules via a few hacks. This extended coverage to code
that was previously missed since Clang's static analyzer only looked at
code that we built in userspace. Running it against the Linux kernel
modules built from my local branch produced a total of 72 reports
against my local branch. Of those, 50 were reports of logic errors and
22 were reports of dead code. Since we already had cleaned up all of
the previous dead code reports, I felt it would be a good next step to
clean up these dead code reports. Clang did a further breakdown of the
dead code reports into:
Dead assignment 15
Dead increment 2
Dead nested assignment 5
The benefit of cleaning these up, especially in the case of dead nested
assignment, is that they can expose places where our error handling is
incorrect. A number of them were fairly straight forward. However
several were not:
In vdev_disk_physio_completion(), not only were we not using the return
value from the static function vdev_disk_dio_put(), but nothing used it,
so I changed it to return void and removed the existing (void) cast in
the other area where we call it in addition to no longer storing it to a
stack value.
In FSE_createDTable(), the function is dead code. Its helper function
FSE_freeDTable() is also dead code, as are the CPP definitions in
`module/zstd/include/zstd_compat_wrapper.h`. We just delete it all.
In zfs_zevent_wait(), we have an optimization opportunity. cv_wait_sig()
returns 0 if there are waiting signals and 1 if there are none. The
Linux SPL version literally returns `signal_pending(current) ? 0 : 1)`
and FreeBSD implements the same semantics, we can just do
`!cv_wait_sig()` in place of `signal_pending(current)` to avoid
unnecessarily calling it again.
zfs_setattr() on FreeBSD version did not have error handling issue
because the code was removed entirely from FreeBSD version. The error is
from updating the attribute directory's files. After some thought, I
decided to propapage errors on it to userspace.
In zfs_secpolicy_tmp_snapshot(), we ignore a lack of permission from the
first check in favor of checking three other permissions. I assume this
is intentional.
In zfs_create_fs(), the return value of zap_update() was not checked
despite setting an important version number. I see no backward
compatibility reason to permit failures, so we add an assertion to catch
failures. Interestingly, Linux is still using ASSERT(error == 0) from
OpenSolaris while FreeBSD has switched to the improved ASSERT0(error)
from illumos, although illumos has yet to adopt it here. ASSERT(error ==
0) was used on Linux while ASSERT0(error) was used on FreeBSD since the
entire file needs conversion and that should be the subject of
another patch.
dnode_move()'s issue was caused by us not having implemented
POINTER_IS_VALID() on Linux. We have a stub in
`include/os/linux/spl/sys/kmem_cache.h` for it, when it really should be
in `include/os/linux/spl/sys/kmem.h` to be consistent with
Illumos/OpenSolaris. FreeBSD put both `POINTER_IS_VALID()` and
`POINTER_INVALIDATE()` in `include/os/freebsd/spl/sys/kmem.h`, so we
copy what it did.
Whenever a report was in platform-specific code, I checked the FreeBSD
version to see if it also applied to FreeBSD, but it was only relevant a
few times.
Lastly, the patch that enabled Clang's static analyzer to be run on the
Linux kernel modules needs more work before it can be put into a PR. I
plan to do that in the future as part of the on-going static analysis
work that I am doing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14380
There is an external assembly declaration extension in GNU C that glibc
uses when building with ieee128 floating point support on ppc64le.
Marking that as volatile makes no sense, so the build breaks.
It does not make sense to only mark this as volatile on Linux, since if
do not want the compiler reordering things on Linux, we do not want the
compiler reordering things on any other platform, so we stop treating
Linux specially and just manually inline the CPP macro so that we can
eliminate it. This should fix the build on ppc64le.
Tested-by: @gyakovlev
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14308Closes#14384
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/null/badzero.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/semicolon.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/minmax.cocci
There was a third opportunity to use `MIN()`, but that was in
`FSE_minTableLog()` in `module/zstd/lib/compress/fse_compress.c`.
Upstream zstd has yet to make this change and I did not want to change
header includes just for MIN, or do a one off, so I left it alone.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
In zfs_zaccess_dataset_check(), we have the following subexpression:
(!IS_DEVVP(ZTOV(zp)) ||
(IS_DEVVP(ZTOV(zp)) && (v4_mode & WRITE_MASK_ATTRS)))
When !IS_DEVVP(ZTOV(zp)) is false, IS_DEVVP(ZTOV(zp)) is true under the
law of the excluded middle since we are not doing pseudoboolean alegbra.
Therefore doing:
(IS_DEVVP(ZTOV(zp)) && (v4_mode & WRITE_MASK_ATTRS))
Is unnecessary and we can just do:
(v4_mode & WRITE_MASK_ATTRS)
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/excluded_middle.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/flexible_array.cocci
However, unlike the cases where the GNU zero length array extension had
been used, coccicheck would not suggest patches for the older style
single member arrays. That was good because blindly changing them would
break size calculations in most cases.
Therefore, this required care to make sure that we did not break size
calculations. In the case of `indirect_split_t`, we use
`offsetof(indirect_split_t, is_child[is->is_children])` to calculate
size. This might be subtly wrong according to an old mailing list
thread:
https://inbox.sourceware.org/gcc-prs/20021226123454.27019.qmail@sources.redhat.com/T/
That is because the C99 specification should consider the flexible array
members to start at the end of a structure, but compilers prefer to put
padding at the end. A suggestion was made to allow compilers to allocate
padding after the VLA like compilers already did:
http://std.dkuug.dk/JTC1/SC22/WG14/www/docs/n983.htm
However, upon thinking about it, whether or not we allocate end of
structure padding does not matter, so using offsetof() to calculate the
size of the structure is fine, so long as we do not mix it with sizeof()
on structures with no array members.
In the case that we mix them and padding causes offsetof(struct_t,
vla_member[0]) to differ from sizeof(struct_t), we would be doing unsafe
operations if we underallocate via `offsetof()` and then overcopy via
sizeof().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
fdc2d30371 accidentally broke the
indentation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/flexible_array.cocci
The Linux kernel's documentation makes a good case for why we should not
use these:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic patch
that caught it was:
./scripts/coccinelle/api/alloc/zalloc-simple.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught these. The semantic patch
that caught them was:
./scripts/coccinelle/api/alloc/alloc_cast.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
When activating filesystem features after receiving a snapshot, do
so only in syncing context.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14304Closes#14252
The default_bs and default_ibs tunables control the default block size
and indirect block size.
So far, default_bs and default_ibs were tunable only on FreeBSD, e.g.,
sysctl vfs.zfs.default_ibs
Remove the FreeBSD-specific sysctl code and expose default_bs and
default_ibs as tunables on both Linux and FreeBSD using
ZFS_MODULE_PARAM.
One of the use cases for changing the values of those tunables is to
lower the indirect block size, which may improve performance of large
directories (as discussed during the OpenZFS Leadership Meeting
on 2022-08-16).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Wasabi Technology, Inc.
Closes#14293
This change turns `MZAP_MAX_BLKSZ` into a `ZFS_MODULE_PARAM()` called
`zap_micro_max_size`. As a result, we can experiment with different
micro ZAP sizes to improve directory size scaling.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Mateusz Piotrowski <mateuszpiotrowski@klarasystems.com>
Co-authored-by: Toomas Soome <toomas.soome@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateuszpiotrowski@klarasystems.com>
Sponsored-by: Wasabi Technology, Inc.
Closes#14292
The Blocking Queue (bqueue) code is used by zfs send/receive to send
messages between the various threads. It uses a shared linked list,
which is locked whenever we enqueue or dequeue. For workloads which
process many blocks per second, the locking on the shared list can be
quite expensive.
This commit changes the bqueue logic to have 3 linked lists:
1. An enquing list, which is used only by the (single) enquing thread,
and thus needs no locks.
2. A shared list, with an associated lock.
3. A dequing list, which is used only by the (single) dequing thread,
and thus needs no locks.
The entire enquing list can be moved to the shared list in constant
time, and the entire shared list can be moved to the dequing list in
constant time. These operations only happen when the `fill_fraction` is
reached, or on an explicit flush request. Therefore, the lock only
needs to be acquired infrequently.
The API already allows for dequing to block until an explicit flush, so
callers don't need to be changed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#14121
ECHRNG is returned when the channel program encounters a runtime
error. For example, this can happen when a snapshot doesn't exist.
We handle this error the same way as the existing EEXIST and ENOENT
error checks.
Additionally, improve the internal debug message to include the
error describing why a pool couldn't be opened.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14351
Encrypted blocks can have up to 2 DVA's, as the third DVA is reserved
for the salt+IV. However, dmu_write_policy() allows non-encrypted
blocks (e.g. DMU_OT_OBJSET) inside encrypted datasets to request and
allocate 3 DVA's, since they don't need a salt+IV (they are merely
authenicated).
However, if such a block becomes a gang block, the gang code incorrectly
limits the gang block header to 2 DVA's. This leads to a "NDVAs
inversion", where a parent block (the gang block header) has less DVA's
than its children (the gang members), causing an assertion failure in
zio_write_gang_member_ready().
This commit addresses the problem by only restricting the gang block
header to 2 DVA's if the block is actually encrypted (and thus its gang
block members can have at most 2 DVA's).
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#14250Closes#14356
This commit supports for spare vdev hotplug. The
spare vdev associated with all the pools will be
marked as "Removed" when the drive is physically
detached and will become "Available" when the
drive is reattached. Currently, the spare vdev
status does not change on the drive removal and
the same is the case with reattachment.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14295
Every ARC buffer holds a reference on the header. It means headers with
buffers are never evictable. When we are evicting a header, there can
be no more buffers to free. Just assert that.
b_evict_lock seems not protecting anything now. Remove it.
Buffers checksum should also be freed with the last uncompressed buffer,
so it should not be there also when we are evicting the header.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Linux 6.2 renamed the get_acl() operation to get_inode_acl() in
the inode_operations struct. This should fix Issue #14323.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#14323Closes#14331
Linux 863f144 modified the .tmpfile interface to pass a struct file,
rather than a struct dentry, and expect the tmpfile implementation to
open inside of tmpfile().
This patch implements a configuration test that checks for this new API
and appropriately sets a HAVE_TMPFILE_DENTRY flag that tracks this old
API. Contingent on this flag, the appropriate API is implemented.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes#14301Closes#14343
Authored by: Dan McDonald <danmcd@mnx.io>
Reviewed by: Patrick Mooney <pmooney@pfmooney.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Ported-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Illumos-issue: https://www.illumos.org/issues/15286
Illumos-commit: f137b22e73
Porting Notes:
The patch in illumos did not have much of a commit message, and did not
provide attribution to the reporter, while original patch proposed to
OpenZFS did, so I am listing the reporter (myself) and original patch
author (also myself) below while including the original commit message
with some minor corrections as part of the porting notes:
In do_composition(), we have:
size = u8_number_of_bytes[*p];
if (size <= 1 || (p + size) > oslast)
break;
There, we have type promotion from int8_t to size_t, which is unsigned.
C will sign extend the value as part of the widening before treating the
value as unsigned and the negative values we can counter are error
values from U8_ILLEGAL_CHAR and U8_OUT_OF_RANGE_CHAR, which are -1 and
-2 respectively. The unsigned versions of these under two's complement
are SIZE_MAX and SIZE_MAX-1 respectively.
The bounds check is written under the assumption that `size <= 1` does a
signed comparison. This is followed by a pointer comparison to see if
the string has the correct length, which is fine.
A little further down we have:
for (i = 0; i < size; i++)
tc[i] = *p++;
When an error condition is encountered, this will attempt to iterate at
least SIZE_MAX-1 times, which will massively overflow the buffer, which
is not fine.
The kernel will kill the loop as soon as it hits the kernel stack guard
on Linux systems built with CONFIG_VMAP_STACK=y, which should be just
about all of them. That prevents arbitrary code execution and just about
any other bad thing that a black hat attacker might attempt with
knowledge of this buffer overflow. Other systems' kernels have
mitigations for unbounded in-kernel buffer overflows that will catch
this too.
Also, the patch in illumos-gate made an effort to fix C style issues
that had been fixed in the OpenZFS/ZFSOnLinux repository. Those issues
had been mentioned in the email that I originally sent them about this
issue. One of the fixes had not been already done, so it is included.
Another to collect_a_seq()'s arguments was handled differently in
OpenZFS. For the sake of avoiding unnecessary differences, it has been
adopted. This has the interesting effect that if you correct the paths
in the illumos-gate patch to match the current OpenZFS repository, you
can reverse apply it cleanly.
Original-patch-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Co-authored-by: Dan McDonald <danmcd@mnx.io>
Closes#14318Closes#14342
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#14328
This saves 40 bytes per full ARC header, reducing it on FreeBSD from
240 to 200 bytes on production bits.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14315
Previously the primarycache property was handled only in the dbuf
layer. Since the speculative prefetcher is implemented in the ARC,
it had to be disabled for uncacheable buffers.
This change gives the ARC knowledge about uncacheable buffers
via arc_read() and arc_write(). So when remove_reference() drops
the last reference on the ARC header, it can either immediately destroy
it, or if it is marked as prefetch, put it into a new arc_uncached state.
That state is scanned every second, evicting stale buffers that were
not demand read.
This change also tracks dbufs that were read from the beginning,
but not to the end. It is assumed that such buffers may receive further
reads, and so they are stored in dbuf cache. If a following
reads reaches the end of the buffer, it is immediately evicted.
Otherwise it will follow regular dbuf cache eviction. Since the dbuf
layer does not know actual file sizes, this logic is not applied to
the final buffer of a dnode.
Since uncacheable buffers should no longer stay in the ARC for long,
this patch also tries to optimize I/O by allocating ARC physical
buffers as linear to allow buffer sharing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14243
ARC code was many times significantly modified over the years, that
created significant amount of tangled and potentially broken code.
This should make arc_access()/arc_read() code some more readable.
- Decouple prefetch status tracking from b_refcnt. It made sense
originally, but became highly cryptic over the years. Move all the
logic into arc_access(). While there, clean up and comment state
transitions in arc_access(). Some transitions were weird IMO.
- Unify arc_access() calls to arc_read() instead of sometimes calling
it from arc_read_done(). To avoid extra state changes and checks add
one more b_refcnt for ARC_FLAG_IO_IN_PROGRESS.
- Reimplement ARC_FLAG_WAIT in case of ARC_FLAG_IO_IN_PROGRESS with
the same callback mechanism to not falsely account them as hits. Count
those as "iohits", an intermediate between "hits" and "misses". While
there, call read callbacks in original request order, that should be
good for fairness and random speculations/allocations/aggregations.
- Introduce additional statistic counters for prefetch, accounting
predictive vs prescient and hits vs iohits vs misses.
- Remove hash_lock argument from functions not needing it.
- Remove ARC_FLAG_PREDICTIVE_PREFETCH, since it should be opposite
to ARC_FLAG_PRESCIENT_PREFETCH if ARC_FLAG_PREFETCH is set. We may
wish to add ARC_FLAG_PRESCIENT_PREFETCH to few more places.
- Fix few false positive tests found in the process.
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14123
vdev_geom_read_pool_label() can leave NULL in configs. Check for it
and skip consistently when generating rootconf.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#14291
There is a lock order inversion deadlock between `spa_errlog_lock` and
`dp_config_rwlock`:
A thread in `spa_delete_dataset_errlog()` is running from a sync task.
It is holding the `dp_config_rwlock` for writer (see
`dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`.
A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock`
(see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as
reader).
Note that this was introduced by #12812.
This commit address this by defining the lock ordering to be
dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock.
spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this
order, and then process_error_block() and get_head_and_birth_txg() can
verify that the dp_config_rwlock is already held.
Additionally, a buffer overrun in `spa_get_errlog()` is corrected. Many
code paths didn't check if `*count` got to zero, instead continuing to
overwrite past the beginning of the userspace buffer at `uaddr`.
Tested by having some errors in the pool (via `zinject -t data
/path/to/file`), one thread running `zpool iostat 0.001`, and another
thread runs `zfs destroy` (in a loop, although it hits the first time).
This reproduces the problem easily without the fix, and works with the
fix.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#14239Closes#14289
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Doug Rabson <dfr@rabson.org>
Closes#14286Closes#14287
This fixes a kernel stack leak.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: Nicholas Sherlock <n.sherlock@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13778Closes#14255
We currently compute a 64-bit hash three times, which consumes 0.8% CPU
time on ARC eviction heavy workloads. Caching the 64-bit value in the
dbuf allows us to avoid that overhead.
Sponsored-By: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Closes#14251
If the fields to be listed and sorted by are constrained to those
populated by dsl_dataset_fast_stat(), then zfs list is much faster,
as it does not need to open each objset and reads its properties.
A previous optimization by Pawel Dawidek
(0cee24064a) took advantage
of this to make listing snapshot names sorted only by name much faster.
However, it was limited to `-o name -s name`, this work extends this
optimization to work with:
- name
- guid
- createtxg
- numclones
- inconsistent
- redacted
- origin
and could be further extended to any other properties supported by
dsl_dataset_fast_stat() or similar, that do not require extra locking
or reading from disk.
This was committed before (9a9e2e343dfa2af28bf7910de77ae73aa006de62),
but was reverted due to a regression when used with an older kernel.
If the kernel does not populate zc->zc_objset_stats, we now fallback
to getting the properties via the slower interface, to avoid problems
with newer userland and older kernels.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14110
zfs_zaccess_trivial() calls the generic_permission() to read
xattr attributes. This causes deadlock if called from
zpl_xattr_set_dir() context as xattr and the dent locks are
already held in this scenario. This commit skips the permissions
checks for extended attributes since the Linux VFS stack already
checks it before passing us the control.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14220
When inside a jail, visibility on datasets not "jailed" to the
jail is restricted. However, it was possible to enumerate all
datasets in the pool by looking at the kstats sysctl MIB.
Only the kstats corresponding to datasets that the user has
visibility on are accessible now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14254
Context:
We recently had a scenario where a customer with 2x10TB disks at 95+%
fragmentation and capacity, wanted to migrate their disks to a 2x20TB
setup. So they added the 2 new disks and submitted the removal of the
first 10TB disk. The removal took a lot more than expected (order of
more than a week to 2 weeks vs a couple of days) and once it was done it
generated a huge indirect mappign table in RAM (~16GB vs expected ~1GB).
Root-Cause:
The removal code calls `metaslab_alloc_dva()` to allocate a new block
for each evacuating block in the removing device and it tries to batch
them into 16MB segments. If it can't find such a segment it tries for
8MBs, 4MBs, all the way down to 512 bytes.
In our scenario what would happen is that `metaslab_alloc_dva()` from
the removal thread pick the new devices initially but wouldn't allocate
from them because of throttling in their metaslab allocation queue's
depth (see `metaslab_group_allocatable()`) as these devices are new and
favored for most types of allocations because of their free space. So
then the removal thread would look at the old fragmented disk for
allocations and wouldn't find any contiguous space and finally retry
with a smaller allocation size until it would to the low KB range. This
caused a lot of small mappings to be generated blowing up the size of
the indirect table. It also wasted a lot of CPU while the removal was
active making everything slow.
This patch:
Make all allocations coming from the device removal thread bypass the
throttle checks. These allocations are not even counted in the metaslab
allocation queues anyway so why check them?
Side-Fix:
Allocations with METASLAB_DONT_THROTTLE in their flags would not be
accounted at the throttle queues but they'd still abide by the
throttling rules which seems wrong. This patch fixes this by checking
for that flag in `metaslab_group_allocatable()`. I did a quick check to
see where else this flag is used and it doesn't seem like this change
would cause issues.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#14159
If the bp is NULL, we have a hole. However, when we build with
assertions, we will dereference bp when `blkid == DMU_SPILL_BLKID`. When
this happens on a hole, we will have a NULL pointer dereference.
Reported-by: Coverity (CID-1524670)
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14264
zio is never NULL when given to the vdev. Coverity complained saying:
"Either the check against null is unnecessary, or there may be a null
pointer dereference."
Reported-by: Coverity (CID-1466174)
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14263
dsl_dataset_snapshot_sync_impl() declares `static zil_header_t zero_zil
__maybe_unused;`, but this is also declared globally. This wastes
memory.
CodeQL's cpp/local-variable-hides-global-variable check caught this.
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14263
When processing abds, we execute 1 `kfpu_begin()`/`kfpu_end()` pair on
every page in the abd. This is wasteful and slows down checksum
performance versus what the benchmark claimed. We correct this by moving
those calls to the init and fini functions.
Also, we always check the buffer length against 0 before calling the
non-scalar checksum functions. This means that we do not need to execute
the loop condition for the first loop iteration. That allows us to
micro-optimize the checksum calculations by switching to do-while loops.
Note that we do not apply that micro-optimization to the scalar
implementation because there is no check in
`fletcher_4_incremental_native()`/`fletcher_4_incremental_byteswap()`
against 0 sized buffers being passed.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14247
I read the following article and noticed a couple of ZFS bugs mentioned:
https://pvs-studio.com/en/blog/posts/cpp/0377/
I decided to search for them in the modern OpenZFS codebase and then
found one that matched the description of the first one:
V593 Consider reviewing the expression of the 'A = B != C' kind. The
expression is calculated as following: 'A = (B != C)'. zfs_vfsops.c 498
The consequence of this is that the error value is replaced with `1`
when there is an error. When there is no error, 0 is correctly passed.
This is a very minor issue that is unlikely to cause any real problems.
The incorrect error code would either be returned to the mount command
on a failure or any of `zfs receive`, `zfs recv`, `zfs rollback` or `zfs
upgrade`.
The second one has already been fixed.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14261
When doing a device removal on a pool with gang blocks, the zio pipeline
can deadlock when trying to free blocks from a device which is being
removed with a stack similar to this:
0xffff8ab9a13a1740 UNINTERRUPTIBLE 4
__schedule+0x2e5
__schedule+0x2e5
schedule+0x33
schedule_preempt_disabled+0xe
__mutex_lock.isra.12+0x2a7
__mutex_lock.isra.12+0x2a7
__mutex_lock_slowpath+0x13
mutex_lock+0x2c
free_from_removing_vdev+0x61
metaslab_free_impl+0xd6
metaslab_free_dva+0x5e
metaslab_free+0x196
zio_free_sync+0xe4
zio_free_gang+0x38
zio_gang_tree_issue+0x42
zio_gang_tree_issue+0xa2
zio_gang_issue+0x6d
zio_execute+0x94
zio_execute+0x94
taskq_thread+0x23b
kthread+0x120
ret_from_fork+0x1f
Since there are gang blocks we have to read the gang members as part of
the free. This can be seen with a zio dependency tree that looks like
this:
sdb> echo 0xffff900c24f8a700 | zio -rc | zio
ADDRESS TYPE STAGE WAITER
0xffff900c24f8a700 NULL CHECKSUM_VERIFY 0xffff900ddfd31740
0xffff900c24f8c920 FREE GANG_ASSEMBLE -
0xffff900d93d435a0 READ DONE
In the illustration above we are processing frees but because of gang
block we have to read the constituents blocks. Once we finish the READ
in the zio pipeline we will execute the parent. In this case the parent
is a FREE but the zio taskq is a READ and we continue to process the
pipeline leading to the stack above. In the stack above, we are blocked
waiting for the svr_lock so as a result a READ interrupt taskq thread
is now consumed. Eventually, all of the READ taskq threads end up
blocked and we're unable to complete any read requests.
In zio_notify_parent there is an optimization to continue to use
the taskq thread to exectue the parent's pipeline. To resolve the
deadlock above, we only allow this optimization if the parent's
zio type matches the child which just completed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
External-issue: DLPX-80130
Closes#14236
After a device has been removed, any nopwrites for blocks on that
indirect vdev should be ignored and a new block should be allocated. The
original code attempted to handle this but used the wrong block pointer
when checking for indirect vdevs and failed to check all DVAs.
This change corrects both of these issues and modifies the test case
to ensure that it properly tests nopwrites with device removal.
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#14235
The checksum error counter is incremented after reporting to ZED. This
leads ZED to receiving a checksum error report with 0 checksum errors.
To avoid this, bump the checksum error counter before reporting to ZED.
Sponsored-by: Seagate Technology LLC
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Closes#14190
- Clang 15 doesn't support `-fno-ipa-sra` anymore. Do a separate
check for `-fno-ipa-sra` support by $KERNEL_CC.
- Don't enable `-mgeneral-regs-only` for certain module files.
Fix#13260
- Scope `GCC diagnostic ignored` statements to GCC only. Clang
doesn't need them to compile the code.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#13260Closes#14150
Squelch false positives reported by GCC 12 with UBSan.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#14150
Following facebook/zstd#2545, I noticed that one field in `seq_t` is
optional, and only used in combination with prefetching. (This may have
contributed to static analyzer failure to detect correct
initialization).
I then wondered if it would be possible to rewrite the code so that this
optional part is handled directly by the prefetching code rather than
delegated as an option into `ZSTD_decodeSequence()`.
This resulted into this refactoring exercise where the prefetching
responsibility is better isolated into its own function and
`ZSTD_decodeSequence()` is streamlined to contain strictly Sequence
decoding operations. Incidently, due to better code locality, it
reduces the need to send information around, leading to simplified
interface, and smaller state structures.
Port of facebook/zstd@f5434663ea
Reported-by: Coverity (CID 1462271)
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Ported-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14212
The bound check condition should always be met because we selected
`set_basic` as our encoding type. But that code is very far away, so
assert it is true so if it is ever false we can catch it, and add a
bounds check.
Port of facebook/zstd@1047097dad
Reported-by: Coverity (CID 1524446)
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Ported-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14212
When ZFS is built with assertions, a prefetch is done on a redacted
blkptr and `dpa->dpa_dnode` is NULL, we will have a NULL pointer
dereference in `dbuf_prefetch_indirect_done()`.
Both Coverity and Clang's Static Analyzer caught this.
Reported-by: Coverity (CID 1524671)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14210
range is always deferenced before it reaches this check, such that the
kmem_zalloc() call is never executed.
A previously version of this had erronously also pruned the
`range->eos_marker = B_TRUE` line, but it must be set whenever we
encounter an error or are cancelled early.
Coverity incorrectly complained about a potential NULL pointer
dereference because of this.
Reported-by: Coverity (CID 1524550)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14210
There was the series from me a year ago which fixed most of the
callback vs implementation prototype mismatches. It was based on
running the CFI-enabled kernel (in permissive mode -- warning
instead of panic) and performing a full ZTS cycle, and then fixing
all of the problems caught by CFI.
Now, Clang 16-dev has new warning flag, -Wcast-function-type-strict,
which detect such mismatches at compile-time. It allows to find the
remaining issues missed by the first series.
There are only two of them left: one for the
secpolicy_vnode_setattr() callback and one for taskq_dispatch().
The fix is easy, since they are not used anywhere else.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#14207
The port of lua to OpenZFS modified lua to use int64_t for numbers
instead of double. As part of this, a function for calculating
exponentiation was replaced with a bit shift. Unfortunately, it did not
handle negative values. Also, it only supported exponents numbers with
7 digits before before overflow. This supports exponents up to 15 digits
before overflow.
Clang's static analyzer reported this as "Result of operation is garbage
or undefined" because the exponent was negative.
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14204
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14199
Both vop_fsync and vfs_stdsync are effectively just costly no-ops
as they only act on ->v_bufobj.bo_dirty et al, which are unused
by zfs.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#14157
I've noticed that some of those counters are used in hot paths like
dnode_hold_impl(), and results of this change is visible in profiler.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14198
atomic_dec_32() should be a bit lighter than atomic_dec_32_nv().
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14200
If the attached disk already contains a vdev GUID, it
means the disk is not clean. In such a scenario, the
physical path would be a match that makes the disk
faulted when trying to online it. So, we would only
want to proceed if either GUID matches with the last
attached disk or the disk is in a clean state.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14181
These `sprintf()` calls are used repeatedly to write to a buffer. There
is no protection against overflow other than reviewers explicitly
checking to see if the buffers are big enough. However, such issues are
easily missed during review and when they are missed, we would rather
stop printing rather than have a buffer overflow, so we convert these
functions to use `kmem_scnprintf()`. The Linux kernel provides an entire
page for module parameters, so we are safe to write up to PAGE_SIZE.
Removing `sprintf()` from these functions removes the last instances of
`sprintf()` usage in our platform-independent kernel code. This improves
XNU kernel compatibility because the XNU kernel does not support
(removed support for?) `sprintf()`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14209
When mounting the root filesystem, vfs_t->mnt_vnodecovered is null
This will cause zfsctl_is_node() to dereference a null pointer when
mounting, or updating the mount flags, on the root filesystem, both
of which happen during the boot process.
Reported-by: Martin Matuska <mm@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14218
It is protected by z_hold_locks, so we do not need more serialization,
simple integer math should be fine.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14196
In order for zed to process the removal event correctly,
udev change event needs to be posted to sync the blkid
information. spa_create() and spa_config_update() posts
the event already through spa_write_cachefile(). Doing
the same for spa_vdev_attach() that handles the case
for vdev attachment and replacement.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14172
We are not allowed to dirty a filesystem when done receiving
a snapshot. In this case the flag SPA_FEATURE_LARGE_BLOCKS will
not be set on that filesystem since the filesystem is not on
dp_dirty_datasets, and a subsequent encrypted raw send will fail.
Fix this by checking in dsl_dataset_snapshot_sync_impl() if the feature
needs to be activated and do so if appropriate.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#13699Closes#13782
In #13709, as in #11294 before it, it turns out that 63a26454 still had
the same failure mode as when it was first landed as d1d47691, and
fails to unlock certain datasets that formerly worked.
Rather than reverting it again, let's add handling to just throw out
the accounting metadata that failed to unlock when that happens, as
well as a test with a pre-broken pool image to ensure that we never get
bitten by this again.
Fixes: #13709
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The original ARC paper called for an initial 50/50 MRU/MFU split
and this is accounted in various places where arc_p = arc_c >> 1,
with further adjustment based on ghost lists size/hit. However, in
current code both arc_adapt() and arc_get_data_impl() aggressively
grow arc_p until arc_c is reached, causing unneeded pressure on
MFU and greatly reducing its scan-resistance until ghost list
adjustments kick in.
This patch restores the original behavior of initially having arc_p
as 1/2 of total ARC, without preventing MRU to use up to 100% total
ARC when MFU is empty.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#14137Closes#14120
f224eddf92 began dereferencing a NULL
checked pointer in zpl_vap_init(), which made Coverity complain because
either the dereference is unsafe or the NULL check is unnecessary. Upon
inspection, this pointer is guaranteed to never be NULL because it is
from the Linux kernel VFS. The calls into ZFS simply would not make
sense if this pointer were NULL, so the NULL check is unnecessary.
Reported-by: Coverity (CID 1527260)
Reported-by: Coverity (CID 1527262)
Reviewed-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14170
945b407486 neglected to `NULL` check
`tx->tx_objset`, which is already done in the function. This upset
Coverity, which complained about a "dereference after null check".
Upon inspection, it was found that whenever `dmu_tx_create_dd()` is
called followed by `dmu_tx_assign()`, such as in
`dsl_sync_task_common()`, `tx->tx_objset` will be `NULL`.
Reported-by: Coverity (CID 1527261)
Reviewed-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14170
Linux defaults to setting "failfast" on BIOs, so that the OS will not
retry IOs that fail, and instead report the error to ZFS.
In some cases, such as errors reported by the HBA driver, not
the device itself, we would wish to retry rather than generating
vdev errors in ZFS. This new property allows that.
This introduces a per vdev option to disable the failfast option.
This also introduces a global module parameter to define the failfast
mask value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Seagate Technology LLC
Submitted-by: Klara, Inc.
Closes#14056
The quota for ZVOLs is set to the size of the volume. When the quota
reaches the maximum, there isn't an excellent way to check if the new
writers are overwriting the data or if they are inserting a new one.
Because of that, when we reach the maximum quota, we wait till txg is
flushed. This is causing a significant fluctuation in bandwidth.
In the case of ZVOL, the quota is enforced by the volsize, so we
can omit it.
This commit adds a sysctl thats allow to control if the quota mechanism
should be enforced or not.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Zededa Inc.
Sponsored-by: Klara Inc.
Closes#13838
If there were no zil entries to replay, skip zil_close. zil_close waits
for a transaction to sync. That can take several seconds, for example
during pool import of a resilvering pool. Skipping zil_close can cut
the time for "zpool import" from 2 hours to 45 seconds on a resilvering
pool with a thousand zvols.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Sponsored-by: Axcient
Closes#13999Closes#14015
Linux 5.17 commit torvalds/linux@5dfbfe71e enables "the idmapping
infrastructure to support idmapped mounts of filesystems mounted
with an idmapping". Update the OpenZFS accordingly to improve the
idmapped mount support.
This pull request contains the following changes:
- xattr setter functions are fixed to take mnt_ns argument. Without
this, cp -p would fail for an idmapped mount in a user namespace.
- idmap_util is enhanced/fixed for its use in a user ns context.
- One test case added to test idmapped mount in a user ns.
Reviewed-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#14097
Require that ZFS_LEGACY_SUPPORT be defined for legacy ioctl support to
be built. For now, define it in zfs_ioctl_compat.h so support is always
built. This will allow systems that need never support pre-openzfs
tools a mechanism to remove support at build time. This code should
be removed once the need for tool compatability is gone.
No functional change at this time.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14127
vn_renamepath() is a Solaris-ism that was defined away in the FreeBSD
port. Now that the only use is in the FreeBSD zfs_vnops_os.c, drop it
entierly.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14127
Special vdevs should not be replaced by a hot spare.
Log vdevs already support this, extending the
functionality for special vdevs.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14129
Currently, only Blake3 x86 Asm code has signs of being ENDBR-aware.
At least, under certain conditions it includes some header file and
uses some custom macro from there.
Linux has its own NOENDBR since several releases ago. It's defined
in the same <asm/linkage.h>, so currently <sys/asm_linkage.h>
already is provided with it.
Let's unify those two into one %ENDBR macro. At first, check if it's
present already. If so -- use Linux kernel version. Otherwise, try
to go that second way and use %_CET_ENDBR from <cet.h> if available.
If no, fall back to just empty definition.
This fixes a couple more 'relocations to !ENDBR' across the module.
And now that we always have the latest/actual ENDBR definition, use
it at the entrance of the few corresponding functions that objtool
still complains about. This matches the way how it's used in the
upstream x86 core Asm code.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#14035
objtool properly complains that it can't decode some of the
instructions from ICP x86 Asm code. As mentioned in the Makefile,
where those object files were excluded from objtool check (but they
can still be visible under IBT and LTO), those are just constants,
not code.
In that case, they must be placed in .rodata, so they won't be
marked as "allocatable, executable" (ax) in EFL headers and this
effectively prevents objtool from trying to decode this data. That
reveals a whole bunch of other issues in ICP Asm code, as previously
objtool was bailing out after that warning message.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#14035
Commit 43569ee374 ("Fix objtool: missing int3 after ret warning")
addressed replacing all `ret`s in x86 asm code to a macro in the
Linux kernel in order to enable SLS. That was done by copying the
upstream macro definitions and fixed objtool complaints.
Since then, several more mitigations were introduced, including
Rethunk. It requires to have a jump to one of the thunks in order
to work, so the RET macro was changed again. And, as ZFS code
didn't use the mainline defition, but copied it, this is currently
missing.
Objtool reminds about it time to time (Clang 16, CONFIG_RETHUNK=y):
fs/zfs/lua/zlua.o: warning: objtool: setjmp+0x25: 'naked' return
found in RETHUNK build
fs/zfs/lua/zlua.o: warning: objtool: longjmp+0x27: 'naked' return
found in RETHUNK build
Do it the following way:
* if we're building under Linux, unconditionally include
<linux/linkage.h> in the related files. It is available in x86
sources since even pre-2.6 times, so doesn't need any conftests;
* then, if RET macro is available, it will be used directly, so that
we will always have the version actual to the kernel we build;
* if there's no such macro, we define it as a simple `ret`, as it
was on pre-SLS times.
This ensures we always have the up-to-date definition with no need
to update it manually, and at the same time is safe for the whole
variety of kernels ZFS module supports.
Then, there's a couple more "naked" rets left in the code, they're
just defined as:
.byte 0xf3,0xc3
In fact, this is just:
rep ret
`rep ret` instead of just `ret` seems to mitigate performance issues
on some old AMD processors and most likely makes no sense as of
today.
Anyways, address those rets, so that they will be protected with
Rethunk and SLS. Include <sys/asm_linkage.h> here which now always
has RET definition and replace those constructs with just RET.
This wipes the last couple of places with unpatched rets objtool's
been complaining about.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#14035
There is an off by 1 error in the check. Fortunately, this function does
not appear to be used in kernel space, despite being compiled as part of
the kernel module. However, it is used in userspace. Callers of
lzc_ioctl_fd() likely will crash if they attempt to use the
unimplemented request number.
This was reported by FreeBSD's coverity scan.
Reported-by: Coverity (CID 1432059)
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14135
Some of our customers have been occasionally hitting zfs import failures
in Linux because udevd doesn't create the by-id symbolic links in time
for zpool import to use them. The main issue is that the
systemd-udev-settle.service that zfs-import-cache.service and other
services depend on is racy. There is also an openzfs issue filed (see
https://github.com/openzfs/zfs/issues/10891) outlining the problem and
potential solutions.
With the proper solutions being significant in terms of complexity and
the priority of the issue being low for the time being, this patch
exposes `zfs_vdev_open_timeout_ms` as a tunable so people that are
experiencing this issue often can increase it as a workaround.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#14133
Rather than doing a terrible credential swapping hack, we just
check that the thing being mounted is a snapshot, and the mountpoint
is the zfsctl directory, then we allow it.
If the mount attempt is from inside a jail, on an unjailed dataset
(mounted from the host, not by the jail), the ability to mount the
snapshot is controlled by a new per-jail parameter: zfs.mount_snapshot
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-by: Modirum MDPay
Sponsored-by: Klara Inc.
Closes#13758
Coverity reported that the ASSERT in taskq_create() is always true and
the `*offp > MAXOFFSET_T` check in zfs_file_seek() is always false.
We delete them as cleanup.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14130
Clang-16 detects this set-but-unused variable which is assigned and
incremented, but never referenced otherwise.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14125
* The complaint in ztest_replay_write() is only possible if something
went horribly wrong. An assertion will silence this and if it goes
off, we will know that something is wrong.
* The complaint in spa_estimate_metaslabs_to_flush() is not impossible,
but seems very unlikely. We resolve this by passing the value from
the `MIN()` that does not go to infinity when the variable is zero.
There was a third report from Clang's scan-build, but that was a
definite false positive and disappeared when checked again through
Clang's static analyzer with Z3 refution via CodeChecker.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14124
Commit 68ddc06b61 introduced support
for receiving unencrypted datasets as children of encrypted ones but
unfortunately got the logic upside down. This resulted in failing to
deny receives of incremental sends into encrypted datasets without
their keys loaded. If receiving a filesystem, the receive was done
into a newly created unencrypted child dataset of the target. In
case of volumes the receive made the target volume undeletable since
a dataset was created below it, which we obviously can't handle.
Incremental streams with embedded blocks are affected as well.
We fix the broken logic to properly deny receives in such cases.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#13598Closes#14055Closes#14119
Don't assume size_t can carry pointer provenance and use uintptr_t
(identialy on all current platforms) instead.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14131
Cast the integer type to (u)intptr_t before casting to "void *". In
CHERI C/C++ we warn on bare casts from integers to pointers to catch
attempts to create pointers our of thin air. We allow the warning to be
supressed with a suitable cast through (u)intptr_t.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14131
Avoid assuming than a uint64_t can hold a pointer and reduce the
number of casts in the process.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14131
Avoid assuming that a pointer can fit in a uint64_t and use uintptr_t
instead.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14131
Rather than panic debug builds when we fail to parse a whole ZIL, let's
instead improve the logging of errors and continue like in a release
build.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#14116
Check for cr == NULL before dereferencing it in
dsl_enforce_ds_ss_limits() to lookup the zone/jail ID.
Reported-by: Coverity (CID 1210459)
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14103
`snprintf()` is meant to protect against buffer overflows, but operating
on the buffer using its return value, possibly by calling it again, can
cause a buffer overflow, because it will return how many characters it
would have written if it had enough space even when it did not. In a
number of places, we repeatedly call snprintf() by successively
incrementing a buffer offset and decrementing a buffer length, by its
return value. This is a potentially unsafe usage of `snprintf()`
whenever the buffer length is reached. CodeQL complained about this.
To fix this, we introduce `kmem_scnprintf()`, which will return 0 when
the buffer is zero or the number of written characters, minus 1 to
exclude the NULL character, when the buffer was too small. In all other
cases, it behaves like snprintf(). The name is inspired by the Linux and
XNU kernels' `scnprintf()`. The implementation was written before I
thought to look at `scnprintf()` and had a good name for it, but it
turned out to have identical semantics to the Linux kernel version.
That lead to the name, `kmem_scnprintf()`.
CodeQL only catches this issue in loops, so repeated use of snprintf()
outside of a loop was not caught. As a result, a thorough audit of the
codebase was done to examine all instances of `snprintf()` usage for
potential problems and a few were caught. Fixes for them are included in
this patch.
Unfortunately, ZED is one of the places where `snprintf()` is
potentially used incorrectly. Since using `kmem_scnprintf()` in it would
require changing how it is linked, we modify its usage to make it safe,
no matter what buffer length is used. In addition, there was a bug in
the use of the return value where the NULL format character was not
being written by pwrite(). That has been fixed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14098
CodeQL reported that when the VERIFY3U condition is false, we do not
pass enough arguments to `spl_panic()`. This is because the format
string from `snprintf()` was concatenated into the format string for
`spl_panic()`, which causes us to have an unexpected format specifier.
A CodeQL developer suggested fixing the macro to have a `%s` format
string that takes a stringified RIGHT argument, which would fix this.
However, upon inspection, the VERIFY3U check was never necessary in the
first place, so we remove it in favor of just calling `snprintf()`.
Lastly, it is interesting that every other static analyzer run on the
codebase did not catch this, including some that made an effort to catch
such things. Presumably, all of them relied on header annotations, which
we have not yet done on `spl_panic()`. CodeQL apparently is able to
track the flow of arguments on their way to annotated functions, which
llowed it to catch this when others did not. A future patch that I have
in development should annotate `spl_panic()`, so the others will catch
this too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14098
This reverts commit fb823de9f due to a regression. It is in fact possible
for the range->eos_marker to be false on error.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14042Closes#14104
This patch relax the quota limitation for dataset by around 3%.
What this means is that user can write more data then the quota is
set to. However thanks to that we can get more stable bandwidth, in
case when we are overwriting data in-place, and not consuming any
additional space.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mariusz Zaborski <oshogbo@vexillium.org>
Sponsored-by: Zededa Inc.
Sponsored-by: Klara Inc.
Closes#13839
Reclaim metadata when arc_available_memory < 0 even if
meta_used is not bigger than arc_meta_limit.
As described in https://github.com/openzfs/zfs/issues/14054 if
zfs_arc_meta_limit_percent=100 then ARC target can collapse to
arc_min due to arc_purge not freeing any metadata.
This patch lets arc_prune to do its work when arc_available_memory
is negative even if meta_used is not bigger than arc_meta_limit,
avoiding ARC target collapse.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#14054Closes#14093
The autotrim thread only reads zfs_trim_extent_bytes_min and
zfs_trim_extent_bytes_max variable only on thread start. We
should check for parameter changes during thread execution to
allow parameter changes take effect without needing to disable
then restart the autotrim.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Václav Skála <skala@vshosting.cz>
Closes#14077
Implement support for Linux's RENAME_* flags (for renameat2). Aside from
being quite useful for userspace (providing race-free ways to exchange
paths and implement mv --no-clobber), they are used by overlayfs and are
thus required in order to use overlayfs-on-ZFS.
In order for us to represent the new renameat2(2) flags in the ZIL, we
create two new transaction types for the two flags which need
transactional-level support (RENAME_EXCHANGE and RENAME_WHITEOUT).
RENAME_NOREPLACE does not need any ZIL support because we know that if
the operation succeeded before creating the ZIL entry, there was no file
to be clobbered and thus it can be treated as a regular TX_RENAME.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Closes#12209Closes#14070
This is in preparation for RENAME_EXCHANGE and RENAME_WHITEOUT support
for ZoL, but the changes here allow for far nicer fallbacks than the
previous implementation (the source and target are re-linked in case of
the final link failing).
In addition, a small cleanup was done for the "target exists but is a
different type" codepath so that it's more understandable.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Closes#12209Closes#14070
Open files, which aren't present in the snapshot, which is being
roll-backed to, need to disappear from the visible VFS image of
the dataset.
Kernel provides d_drop function to drop invalid entry from
the dcache, but inode can be referenced by dentry multiple dentries.
The introduced zpl_d_drop_aliases function walks and invalidates
all aliases of an inode.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes#9600Closes#14070
This fixes the instances of the "Multiplication result converted to
larger type" alert that codeQL scanning found.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Andrew Innes <andrew.c12@gmail.com>
Closes#14094
We ran out of space in enum zio_flag for additional flags. Rather than
introduce enum zio_flag2 and then modify a bunch of functions to take a
second flags variable, we expand the type to 64 bits via `typedef
uint64_t zio_flag_t`.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Richard Yao <richard.yao@klarasystems.com>
Closes#14086
Windows port frees memory that was alloc'd aligned in a different way
then alloc'd memory. So changing frees to be specific.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrew Innes <andrew.c12@gmail.com>
Co-Authored-By: Jorgen Lundman <lundman@lundman.net>
Closes#14059
The motivation for upgrading our PRNG is the recent buildbot failures in
the ZTS' tests/functional/fault/decompress_fault test. The probability
of a failure in that test is 0.8^256, which is ~1.6e-25 out of 1, yet we
have observed multiple test failures in it. This suggests a problem with
our random number generation.
The xorshift128+ generator that we were using has been replaced by newer
generators that have "better statistical properties". After doing some
reading, it turns out that these generators have "low linear complexity
of the lowest bits", which could explain the ZTS test failures.
We do two things to try to fix this:
1. We upgrade from xorshift128+ to xoshiro256++ 1.0.
2. We tweak random_get_pseudo_bytes() to copy the higher order
bytes first.
It is hoped that this will fix the test failures in
tests/functional/fault/decompress_fault, although I have not done
simulations. I am skeptical that any simulations I do on a PRNG with a
period of 2^256 - 1 would be meaningful.
Since we have raised the minimum kernel version to 3.10 since this was
first implemented, we have the option of using the Linux kernel's
get_random_int(). However, I am not currently prepared to do performance
tests to ensure that this would not be a regression (for the time
being), so we opt for upgrading our PRNG to a newer one from Sebastiano
Vigna.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13983
Microzap on-disk format does not include a hash tree, expecting one to
be built in RAM during mzap_open(). The built tree is linked to DMU
user buffer, freed when original DMU buffer is dropped from cache. I've
found that workloads accessing many large directories and having active
eviction from DMU cache spend significant amount of time building and
then destroying the trees. I've also found that for each 64 byte mzap
element additional 64 byte tree element is allocated, that is a waste
of memory and CPU caches.
Improve memory efficiency of the hash tree by switching from AVL-tree
to B-tree. It allows to save 24 bytes per element just on pointers.
Save 32 bits on mze_hash by storing only upper 32 bits since lower 32
bits are always zero for microzaps. Save 16 bits on mze_chunkid, since
microzap can never have so many elements. Respectively with the 16 bits
there can be no more than 16 bits of collision differentiators. As
result, struct mzap_ent now drops from 48 (rounded to 64) to 8 bytes.
Tune B-trees for small data. Reduce BTREE_CORE_ELEMS from 128 to 126
to allow struct zfs_btree_core in case of 8 byte elements to pack into
2KB instead of 4KB. Aside of the microzaps it should also help 32bit
range trees. Allow custom B-tree leaf size to reduce memmove() time.
Split zap_name_alloc() into zap_name_alloc() and zap_name_init_str().
It allows to not waste time allocating/freeing memory when processing
multiple names in a loop during mzap_open().
Together on a pool with 10K directories of 1800 files each and DMU
cache limited to 128MB this reduces time of `find . -name zzz` by 41%
from 7.63s to 4.47s, and saves additional ~30% of CPU time on the DMU
cache reclamation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14039
a6ccb36b94 had been intended to include
this to silence Coverity reports, but this one was missed by mistake.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14043
Calling zfs_refcount_remove_many() after freeing memory means we pass a
reference to freed memory as the holder. This is not believed to be able
to cause a problem, but there is a bit of a tradition of fixing these
issues when they appear so that they do not obscure more serious issues
in static analyzer output, so we fix this one too.
Clang's static analyzer found this with the help of CodeChecker's CTU
analysis.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14043
Callers will check if it has been set to NULL before trying to access
it, but never initialize it themselves. Whenever "one block spans two
iovecs", `crypto_get_ptrs()` will return, without ever setting
`*out_data_2 = NULL`. The caller will then do a NULL check against the
uninitailized pointer and if it is not zero, pass it to `memcpy()`.
The only reason this has not caused horrible runtime issues is because
`memcpy()` should be told to copy zero bytes when this happens. That
said, this is technically undefined behavior, so we should correct it so
that future changes to the code cannot trigger it.
Clang's static analyzer found this with the help of CodeChecker's CTU
analysis.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14043
Both Coverity and Clang's static analyzer complain about reading an
uninitialized intval if the property is not passed as DATA_TYPE_UINT64
in the nvlist. This is impossible becuase spa_prop_validate() already
checked this, but they are unlikely to be the last static analyzers to
complain about this, so lets just refactor the code to suppress the
warnings.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14043
Currently, additional/extra copies are created for metadata in
addition to the redundancy provided by the pool(mirror/raidz/draid),
due to this 2 times more space is utilized per inode and this decreases
the total number of inodes that can be created in the filesystem. By
setting redundant_metadata to none, no additional copies of metadata
are created, hence can reduce the space consumed by the additional
metadata copies and increase the total number of inodes that can be
created in the filesystem. Additionally, this can improve file create
performance due to the reduced amount of metadata which needs
to be written.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#13680
This patch handles the race condition on simultaneous failure of
2 drives, which misses the vdev_rebuild_reset_wanted signal in
vdev_rebuild_thread. We retry to catch this inside the
vdev_rebuild_complete_sync function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Samuel Wycliffe J <samwyc@hpe.com>
Closes#14041Closes#14050
Adds support for idmapped mounts. Supported as of Linux 5.12 this
functionality allows user and group IDs to be remapped without changing
their state on disk. This can be useful for portable home directories
and a variety of container related use cases.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#12923Closes#13671
If we encounter an EXDEV error when using the redacted snapshots
feature, the memory used by dspp.fromredactsnaps is leaked.
Clang's static analyzer caught this during an experiment in which I had
annotated various headers in an attempt to improve the results of static
analysis.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13973
The pointer is to a structure member, so it is never NULL.
Coverity complained about this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14042
range is always deferenced before it reaches this check, such that the
kmem_zalloc() call is never executed.
There is also no need to set `range->eos_marker = B_TRUE` because it is
already set.
Coverity incorrectly complained about a potential NULL pointer
dereference because of this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14042
It is never NULL because we return early if dsl_pool_hold() fails.
This caused Coverity to complain.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14042
This is a circularly linked list. mg->mg_next can never be NULL.
This caused 3 defect reports in Coverity.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14042
Clang's static analyzer complained that we could use after free here if
the inner loop ever iterated. That is a false positive, but upon
inspection, the userland abd_alloc_chunks() function never will put
multiple consecutive pages into a `struct scatterlist`, so there is no
need to loop. We delete the inner loop.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14042
If mechanism->cm_param is NULL, passing mechanism to
PROV_SHA2_GET_DIGEST_LEN() will dereference a NULL pointer.
Coverity reported this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14044
Calling spa_open() will pass a NULL pointer to spa_open_common()'s
config parameter. Under the right circumstances, we will dereference the
config parameter without doing a NULL check.
Clang's static analyzer found this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14044
Clang's static analyzer pointed out that whenever zap_lookup_by_dnode()
is called, we have the following stack where strlcpy() is passed a NULL
pointer for realname from zap_lookup_by_dnode():
strlcpy()
zap_lookup_impl()
zap_lookup_norm_by_dnode()
zap_lookup_by_dnode()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14044
clang-tidy caught this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14044
After Linux 6.1-rc1 came out, the build started failing to build a
couple of the files in the linux spl code due to the mutex_init
redefinition. Moving the sys/mutex.h include to a lower position within
these two files appears to fix the problem.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#14040
This patch inserts the `static` keyword to non-global variables,
which where found by the analysis tool smatch.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13970
Out of the 12 defects in lua that coverity reports, 5 of them involve
`lua_typename()` and out of the dozens of defects in ZFS that lua
reports, 3 of them involve `lua_typename()` due to the ZCP code. Given
all of the uses of `lua_typename()` in the ZCP code, I was surprised
that there were not more. It appears that only 2 were reported because
only 3 called `lua_type()`, which does a defective sanity check that
allows invalid types to be passed.
lua/lua@d4fb848be7 addressed this in
upstream lua 5.3. Unfortunately, we did not get that fix since we use
lua 5.2 and we do not have assertions enabled in lua, so the upstream
solution would not do anything.
While we could adopt the upstream solution and enable assertions, a
simpler solution is to fix the issue by making `lua_typename()` return
`internal_type_error` whenever it is called with an invalid type. This
avoids the array overflow and if we ever see it appear somewhere, we
will know there is a problem with the lua interpreter.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13947
These were categorized as the following:
* Dead assignment 23
* Dead increment 4
* Dead initialization 6
* Dead nested assignment 18
Most of these are harmless, but since actual issues can hide among them,
we correct them.
That said, there were a few return values that were being ignored that
appeared to merit some correction:
* `destroy_callback()` in `cmd/zfs/zfs_main.c` ignored the error from
`destroy_batched()`. We handle it by returning -1 if there is an
error.
* `zfs_do_upgrade()` in `cmd/zfs/zfs_main.c` ignored the error from
`zfs_for_each()`. We handle it by doing a binary OR of the error
value from the subsequent `zfs_for_each()` call to the existing
value. This is how errors are mostly handled inside `zfs_for_each()`.
The error value here is passed to exit from the zfs command, so doing
a binary or on it is better than what we did previously.
* `get_zap_prop()` in `module/zfs/zcp_get.c` ignored the error from
`dsl_prop_get_ds()` when the property is not of type string. We
return an error when it does. There is a small concern that the
`zfs_get_temporary_prop()` call would handle things, but in the case
that it does not, we would be pushing an uninitialized numval onto
the lua stack. It is expected that `dsl_prop_get_ds()` will succeed
anytime that `zfs_get_temporary_prop()` does, so that not giving it a
chance to fix things is not a problem.
* `draid_merge_impl()` in `tests/zfs-tests/cmd/draid.c` used
`nvlist_add_nvlist()` twice in ways in which errors are expected to
be impossible, so we switch to `fnvlist_add_nvlist()`.
A few notable ones did not merit use of the return value, so we
suppressed it with `(void)`:
* `write_free_diffs()` in `lib/libzfs/libzfs_diff.c` ignored the error
value from `describe_free()`. A look through the commit history
revealed that this was intentional.
* `arc_evict_hdr()` in `module/zfs/arc.c` did not need to use the
returned handle from `arc_hdr_realloc()` because it is already
referenced in lists.
* `spa_vdev_detach()` in `module/zfs/spa.c` has a comment explicitly
saying not to use the error from `vdev_label_init()` because whatever
causes the error could be the reason why a detach is being done.
Unfortunately, I am not presently able to analyze the kernel modules
with Clang's static analyzer, so I could have missed some cases of this.
In cases where reports were present in code that is duplicated between
Linux and FreeBSD, I made a conscious effort to fix the FreeBSD version
too.
After this commit is merged, regressions like dee8934 should become
extremely obvious with Clang's static analyzer since a regression would
appear in the results as the only instance of unused code. That assumes
that Coverity does not catch the issue first.
My local branch with fixes from all of my outstanding non-draft pull
requests shows 118 reports from Clang's static anlayzer after this
patch. That is down by 51 from 169.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Cedric Berger <cedric@precidata.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13986
Before this patch, in zfs_domount, if zfs_root or d_make_root fails, we
leave zfsvfs != NULL. This will lead to execution of the error handling
`if` statement at the `out` label, and hence to a call to
dmu_objset_disown and zfsvfs_free.
However, zfs_umount, which we call upon failure of zfs_root and
d_make_root already does dmu_objset_disown and zfsvfs_free.
I suppose this patch rather adds to the brittleness of this part of the
code base, but I don't want to invest more time in this right now.
To add a regression test, we'd need some kind of fault injection
facility for zfs_root or d_make_root, which doesn't exist right now.
And even then, I think that regression test would be too closely tied
to the implementation.
To repro the double-disown / double-free, do the following:
1. patch zfs_root to always return an error
2. mount a ZFS filesystem
Here's the stack trace you would see then:
VERIFY3(ds->ds_owner == tag) failed (0000000000000000 == ffff9142361e8000)
PANIC at dsl_dataset.c:1003:dsl_dataset_disown()
Showing stack for process 28332
CPU: 2 PID: 28332 Comm: zpool Tainted: G O 5.10.103-1.nutanix.el7.x86_64 #1
Call Trace:
dump_stack+0x74/0x92
spl_dumpstack+0x29/0x2b [spl]
spl_panic+0xd4/0xfc [spl]
dsl_dataset_disown+0xe9/0x150 [zfs]
dmu_objset_disown+0xd6/0x150 [zfs]
zfs_domount+0x17b/0x4b0 [zfs]
zpl_mount+0x174/0x220 [zfs]
legacy_get_tree+0x2b/0x50
vfs_get_tree+0x2a/0xc0
path_mount+0x2fa/0xa70
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x38/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Christian Schwarz <christian.schwarz@nutanix.com>
Signed-off-by: Christian Schwarz <christian.schwarz@nutanix.com>
Closes#14025
Various module parameters such as `zfs_arc_max` were originally
`uint64_t` on OpenSolaris/Illumos, but were changed to `unsigned long`
for Linux compatibility because Linux's kernel default module parameter
implementation did not support 64-bit types on 32-bit platforms. This
caused problems when porting OpenZFS to Windows because its LLP64 memory
model made `unsigned long` a 32-bit type on 64-bit, which created the
undesireable situation that parameters that should accept 64-bit values
could not on 64-bit Windows.
Upon inspection, it turns out that the Linux kernel module parameter
interface is extensible, such that we are allowed to define our own
types. Rather than maintaining the original type change via hacks to to
continue shrinking module parameters on 32-bit Linux, we implement
support for 64-bit module parameters on Linux.
After doing a review of all 64-bit kernel parameters (found via the man
page and also proposed changes by Andrew Innes), the kernel module
parameters fell into a few groups:
Parameters that were originally 64-bit on Illumos:
* dbuf_cache_max_bytes
* dbuf_metadata_cache_max_bytes
* l2arc_feed_min_ms
* l2arc_feed_secs
* l2arc_headroom
* l2arc_headroom_boost
* l2arc_write_boost
* l2arc_write_max
* metaslab_aliquot
* metaslab_force_ganging
* zfetch_array_rd_sz
* zfs_arc_max
* zfs_arc_meta_limit
* zfs_arc_meta_min
* zfs_arc_min
* zfs_async_block_max_blocks
* zfs_condense_max_obsolete_bytes
* zfs_condense_min_mapping_bytes
* zfs_deadman_checktime_ms
* zfs_deadman_synctime_ms
* zfs_initialize_chunk_size
* zfs_initialize_value
* zfs_lua_max_instrlimit
* zfs_lua_max_memlimit
* zil_slog_bulk
Parameters that were originally 32-bit on Illumos:
* zfs_per_txg_dirty_frees_percent
Parameters that were originally `ssize_t` on Illumos:
* zfs_immediate_write_sz
Note that `ssize_t` is `int32_t` on 32-bit and `int64_t` on 64-bit. It
has been upgraded to 64-bit.
Parameters that were `long`/`unsigned long` because of Linux/FreeBSD
influence:
* l2arc_rebuild_blocks_min_l2size
* zfs_key_max_salt_uses
* zfs_max_log_walking
* zfs_max_logsm_summary_length
* zfs_metaslab_max_size_cache_sec
* zfs_min_metaslabs_to_flush
* zfs_multihost_interval
* zfs_unflushed_log_block_max
* zfs_unflushed_log_block_min
* zfs_unflushed_log_block_pct
* zfs_unflushed_max_mem_amt
* zfs_unflushed_max_mem_ppm
New parameters that do not exist in Illumos:
* l2arc_trim_ahead
* vdev_file_logical_ashift
* vdev_file_physical_ashift
* zfs_arc_dnode_limit
* zfs_arc_dnode_limit_percent
* zfs_arc_dnode_reduce_percent
* zfs_arc_meta_limit_percent
* zfs_arc_sys_free
* zfs_deadman_ziotime_ms
* zfs_delete_blocks
* zfs_history_output_max
* zfs_livelist_max_entries
* zfs_max_async_dedup_frees
* zfs_max_nvlist_src_size
* zfs_rebuild_max_segment
* zfs_rebuild_vdev_limit
* zfs_unflushed_log_txg_max
* zfs_vdev_max_auto_ashift
* zfs_vdev_min_auto_ashift
* zfs_vnops_read_chunk_size
* zvol_max_discard_blocks
Rather than clutter the lists with commentary, the module parameters
that need comments are repeated below.
A few parameters were defined in Linux/FreeBSD specific code, where the
use of ulong/long is not an issue for portability, so we leave them
alone:
* zfs_delete_blocks
* zfs_key_max_salt_uses
* zvol_max_discard_blocks
The documentation for a few parameters was found to be incorrect:
* zfs_deadman_checktime_ms - incorrectly documented as int
* zfs_delete_blocks - not documented as Linux only
* zfs_history_output_max - incorrectly documented as int
* zfs_vnops_read_chunk_size - incorrectly documented as long
* zvol_max_discard_blocks - incorrectly documented as ulong
The documentation for these has been fixed, alongside the changes to
document the switch to fixed width types.
In addition, several kernel module parameters were percentages or held
ashift values, so being 64-bit never made sense for them. They have been
downgraded to 32-bit:
* vdev_file_logical_ashift
* vdev_file_physical_ashift
* zfs_arc_dnode_limit_percent
* zfs_arc_dnode_reduce_percent
* zfs_arc_meta_limit_percent
* zfs_per_txg_dirty_frees_percent
* zfs_unflushed_log_block_pct
* zfs_vdev_max_auto_ashift
* zfs_vdev_min_auto_ashift
Of special note are `zfs_vdev_max_auto_ashift` and
`zfs_vdev_min_auto_ashift`, which were already defined as `uint64_t`,
and passed to the kernel as `ulong`. This is inherently buggy on big
endian 32-bit Linux, since the values would not be written to the
correct locations. 32-bit FreeBSD was unaffected because its sysctl code
correctly treated this as a `uint64_t`.
Lastly, a code comment suggests that `zfs_arc_sys_free` is
Linux-specific, but there is nothing to indicate to me that it is
Linux-specific. Nothing was done about that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Original-patch-by: Andrew Innes <andrew.c12@gmail.com>
Original-patch-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13984Closes#14004
Coverity complains about possible bugs involving referencing NULL return
values and division by zero. The division by zero bugs require that a
block pointer be corrupt, either from in-memory corruption, or on-disk
corruption. The NULL return value complaints are only bugs if
assumptions that we make about the state of data structures are wrong.
Some seem impossible to be wrong and thus are false positives, while
others are hard to analyze.
Rather than dismiss these as false positives by assuming we know better,
we add defensive assertions to let us know when our assumptions are
wrong.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13972
- Add a zfs_exit() call in an error path, otherwise a lock is leaked.
- Remove the fid_gen > 1 check. That appears to be Linux-specific:
zfsctl_snapdir_fid() sets fid_gen to 0 or 1 depending on whether the
snapshot directory is mounted. On FreeBSD it fails, making snapshot
dirs inaccessible via NFS.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Fixes: 43dbf88178 ("FreeBSD: vfsops: use setgen for error case")
Closes#14001Closes#13974
= Problem
While examining a customer's system we noticed unreasonable space
usage from a few snapshots due to gang blocks. Under some further
analysis we discovered that the pool would create gang blocks because
all its disks had non-zero write error counts and they'd be skipped
for normal metaslab allocations due to the following if-clause in
`metaslab_alloc_dva()`:
```
/*
* Avoid writing single-copy data to a failing,
* non-redundant vdev, unless we've already tried all
* other vdevs.
*/
if ((vd->vdev_stat.vs_write_errors > 0 ||
vd->vdev_state < VDEV_STATE_HEALTHY) &&
d == 0 && !try_hard && vd->vdev_children == 0) {
metaslab_trace_add(zal, mg, NULL, psize, d,
TRACE_VDEV_ERROR, allocator);
goto next;
}
```
= Proposed Solution
Get rid of the predicate in the if-clause that checks the past
write errors of the selected vdev. We still try to allocate from
HEALTHY vdevs anyway by checking vdev_state so the past write
errors doesn't seem to help us (quite the opposite - it can cause
issues in long-lived pools like the one from our customer).
= Testing
I first created a pool with 3 vdevs:
```
$ zpool list -v volpool
NAME SIZE ALLOC FREE
volpool 22.5G 117M 22.4G
xvdb 7.99G 40.2M 7.46G
xvdc 7.99G 39.1M 7.46G
xvdd 7.99G 37.8M 7.46G
```
And used `zinject` like so with each one of them:
```
$ sudo zinject -d xvdb -e io -T write -f 0.1 volpool
```
And got the vdevs to the following state:
```
$ zpool status volpool
pool: volpool
state: ONLINE
status: One or more devices has experienced an unrecoverable error.
...<cropped>..
action: Determine if the device needs to be replaced, and clear the
...<cropped>..
config:
NAME STATE READ WRITE CKSUM
volpool ONLINE 0 0 0
xvdb ONLINE 0 1 0
xvdc ONLINE 0 1 0
xvdd ONLINE 0 4 0
```
I also double-checked their write error counters with sdb:
```
sdb> spa volpool | vdev | member vdev_stat.vs_write_errors
(uint64_t)0 # <---- this is the root vdev
(uint64_t)2
(uint64_t)1
(uint64_t)1
```
Then I checked that I the problem was reproduced in my VM as I the
gang count was growing in zdb as I was writting more data:
```
$ sudo zdb volpool | grep gang
ganged count: 1384
$ sudo zdb volpool | grep gang
ganged count: 1393
$ sudo zdb volpool | grep gang
ganged count: 1402
$ sudo zdb volpool | grep gang
ganged count: 1414
```
Then I updated my bits with this patch and the gang count stayed the
same.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#14003
If no errors are encountered, we read an uninitialized error value.
Clang's static analyzer complained about this.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14007
First the function `memset(&key, 0, ...)` but
any call to "goto error;" would call zio_crypt_key_destroy(key) which
calls `rw_destroy()`. The `rw_init()` is moved up to be right after the
memset. This way the rwlock can be released.
The ctx does allocate memory, but that is handled by the memset to 0
and icp skips NULL ptrs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#13976
The metaslab_check_free() function only needs to be called in the
GANG|DEDUP|etc case because zio_free_sync() will internally call
metaslab_check_free().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Finix1979 <yancw@info2soft.com>
Closes#13977
If the `list_head()` returns NULL, we dereference it, right before we
check to see if it returned NULL.
We have defined two different pointers that both point to the same
thing, which are `origin_head` and `origin_ds`. Almost everything uses
`origin_ds`, so we switch them to use `origin_ds`.
We also promote `origin_ds` to a const pointer so that the compiler
verifies that nothing modifies it.
Coverity complained about this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13967
Some header files define structures like this one:
typedef const struct zio_checksum_info {
/* ... */
const char *ci_name;
} zio_abd_checksum_func_t;
So we can use `zio_abd_checksum_func_t` for const declarations now.
It's not needed that we use the `const` qualifier again like this:
`const zio_abd_checksum_func_t *varname;`
This patch solves the double const qualifiers, which were found by
smatch.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13961
Both Clang's Static Analyzer and Synopsys' Coverity would ignore
assertions. Following Clang's advice, we annotate our assertions:
https://clang-analyzer.llvm.org/annotations.html#custom_assertions
This makes both Clang's Static Analyzer and Coverity properly identify
assertions. This change reduced Clang's reported defects from 246 to
180. It also reduced the false positives reported by Coverityi by 10,
while enabling Coverity to find 9 more defects that previously were
false negatives.
A couple examples of this would be CID-1524417 and CID-1524423. After
submitting a build to coverity with the modified assertions, CID-1524417
disappeared while the report for CID-1524423 no longer claimed that the
assertion tripped.
Coincidentally, it turns out that it is possible to more accurately
annotate our headers than the Coverity modelling file permits in the
case of format strings. Since we can do that and this patch annotates
headers whenever `__coverity_panic__()` would have been used in the
model file, we drop all models that use `__coverity_panic__()` from the
model file.
Upon seeing the success in eliminating false positives involving
assertions, it occurred to me that we could also modify our headers to
eliminate coverity's false positives involving byte swaps. We now have
coverity specific byteswap macros, that do nothing, to disable
Coverity's false positives when we do byte swaps. This allowed us to
also drop the byteswap definitions from the model file.
Lastly, a model file update has been done beyond the mentioned
deletions:
* The definitions of `umem_alloc_aligned()`, `umem_alloc()` andi
`umem_zalloc()` were originally implemented in a way that was
intended to inform coverity that when KM_SLEEP has been passed these
functions, they do not return NULL. A small error in how this was
done was found, so we correct it.
* Definitions for umem_cache_alloc() and umem_cache_free() have been
added.
In practice, no false positives were avoided by making these changes,
but in the interest of correctness from future coverity builds, we make
them anyway.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13902
= Issue
Recently we hit an assertion panic in `dsl_process_sub_livelist` while
exporting the spa and interrupting `bpobj_iterate_nofree`. In that case
`bpobj_iterate_nofree` stops mid-way returning an EINTR without clearing
the intermediate AVL tree that keeps track of the livelist entries it
has encountered so far. At that point the code has a VERIFY for the
number of elements of the AVL expecting it to be zero (which is not the
case for EINTR).
= Fix
Cleanup any intermediate state before destroying the AVL when
encountering EINTR. Also added a comment documenting the scenario where
the EINTR comes up. There is no need to do anything else for the calles
of `dsl_process_sub_livelist` as they already handle the EINTR case.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#13939
2a493a4c71 was intended to fix all
instances of coverity reported unchecked return values, but
unfortunately, two were missed by mistake. This commit fixes the
unchecked return values that had been missed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13945
ZED does not take any action for disk removal events if there is no
spare VDEV available. Added zpool_vdev_remove_wanted() in libzfs
and vdev_remove_wanted() in vdev.c to remove the VDEV through ZED
on removal event. This means that if you are running zed and
remove a disk, it will be properly marked as REMOVED.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13797
The current value causes significant artificial slowdown during mass
parallel file removal, which can be observed both on FreeBSD and Linux
when running real workloads.
Sample results from Linux doing make -j 96 clean after an allyesconfig
modules build:
before: 4.14s user 6.79s system 48% cpu 22.631 total
after: 4.17s user 6.44s system 153% cpu 6.927 total
FreeBSD results in the ticket.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#13932Closes#13938
Coverity caught unsafe use of `strcpy()` in `ztest_dmu_objset_own()`,
`nfs_init_tmpfile()` and `dump_snapshot()`. It also caught an unsafe use
of `strlcat()` in `nfs_init_tmpfile()`.
Inspired by this, I did an audit of every single usage of `strcpy()` and
`strcat()` in the code. If I could not prove that the usage was safe, I
changed the code to use either `strlcpy()` or `strlcat()`, depending on
which function was originally used. In some cases, `snprintf()` was used
to replace multiple uses of `strcat` because it was cleaner.
Whenever I changed a function, I preferred to use `sizeof(dst)` when the
compiler is able to provide the string size via that. When it could not
because the string was passed by a caller, I checked the entire call
tree of the function to find out how big the buffer was and hard coded
it. Hardcoding is less than ideal, but it is safe unless someone shrinks
the buffer sizes being passed.
Additionally, Coverity reported three more string related issues:
* It caught a case where we do an overlapping memory copy in a call to
`snprintf()`. We fix that via `kmem_strdup()` and `kmem_strfree()`.
* It caught `sizeof (buf)` being used instead of `buflen` in
`zdb_nicenum()`'s call to `zfs_nicenum()`, which is passed to
`snprintf()`. We change that to pass `buflen`.
* It caught a theoretical unterminated string passed to `strcmp()`.
This one is likely a false positive, but we have the information
needed to do this more safely, so we change this to silence the false
positive not just in coverity, but potentially other static analysis
tools too. We switch to `strncmp()`.
* There was a false positive in tests/zfs-tests/cmd/dir_rd_update.c. We
suppress it by switching to `snprintf()` since other static analysis
tools might complain about it too. Interestingly, there is a possible
real bug there too, since it assumes that the passed directory path
ends with '/'. We add a '/' to fix that potential bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13913
Coverity complains about a possible NULL pointer dereference. This is
impossible, but it suspects it because we do a NULL check against
`spa->spa_root_vdev`. This NULL check was never necessary and makes the
code harder to understand, so we drop it.
In particular, we dereference `spa->spa_root_vdev` when `new_state !=
POOL_STATE_UNINITIALIZED && !hardforce`. The first is only true when
spa_reset is called, which only occurs under fault injection. The
second is true unless `zpool export -F $POOLNAME` is used. Therefore,
we effectively *always* dereference the pointer. In the cases where we
do not, there is no reason to think it is unsafe. Therefore this change
is safe to make.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13905
Apply the fix from upstream.
http://www.lua.org/bugs.html#5.2.2-1https://www.opencve.io/cve/CVE-2014-5461
It should be noted that exploiting this requires the `SYS_CONFIG`
privilege, and anyone with that privilege likely has other opportunities
to do exploits, so it is unlikely that bad actors could exploit this
unless system administrators are executing untrusted ZFS Channel
Programs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13949
In #13871, zfs_vdev_aggregation_limit_non_rotating and
zfs_vdev_aggregation_limit being signed was pointed out as a possible
reason not to eliminate an unnecessary MAX(unsigned, 0) since the
unsigned value was assigned from them.
There is no reason for these module parameters to be signed and upon
inspection, it was found that there are a number of other module
parameters that are signed, but should not be, so we make them unsigned.
Making them unsigned made it clear that some other variables in the code
should also be unsigned, so we also make those unsigned. This prevents
users from setting negative values that could potentially cause bad
behaviors. It also makes the code slightly easier to understand.
Mostly module parameters that deal with timeouts, limits, bitshifts and
percentages are made unsigned by this. Any that are boolean are left
signed, since whether booleans should be considered signed or unsigned
does not matter.
Making zfs_arc_lotsfree_percent unsigned caused a
`zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was
removed. Removing the check was also necessary to prevent a compiler
error from -Werror=type-limits.
Several end of line comments had to be moved to their own lines because
replacing int with uint_t caused us to exceed the 80 character limit
enforced by cstyle.pl.
The following were kept signed because they are passed to
taskq_create(), which expects signed values and modifying the
OpenSolaris/Illumos DDI is out of scope of this patch:
* metaslab_load_pct
* zfs_sync_taskq_batch_pct
* zfs_zil_clean_taskq_nthr_pct
* zfs_zil_clean_taskq_minalloc
* zfs_zil_clean_taskq_maxalloc
* zfs_arc_prune_task_threads
Also, negative values in those parameters was found to be harmless.
The following were left signed because either negative values make
sense, or more analysis was needed to determine whether negative values
should be disallowed:
* zfs_metaslab_switch_threshold
* zfs_pd_bytes_max
* zfs_livelist_min_percent_shared
zfs_multihost_history was made static to be consistent with other
parameters.
A number of module parameters were marked as signed, but in reality
referenced unsigned variables. upgrade_errlog_limit is one of the
numerous examples. In the case of zfs_vdev_async_read_max_active, it was
already uint32_t, but zdb had an extern int declaration for it.
Interestingly, the documentation in zfs.4 was right for
upgrade_errlog_limit despite the module parameter being wrongly marked,
while the documentation for zfs_vdev_async_read_max_active (and friends)
was wrong. It was also wrong for zstd_abort_size, which was unsigned,
but was documented as signed.
Also, the documentation in zfs.4 incorrectly described the following
parameters as ulong when they were int:
* zfs_arc_meta_adjust_restarts
* zfs_override_estimate_recordsize
They are now uint_t as of this patch and thus the man page has been
updated to describe them as uint.
dbuf_state_index was left alone since it does nothing and perhaps should
be removed in another patch.
If any module parameters were missed, they were not found by `grep -r
'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed,
but only because they were in files that had hits.
This patch intentionally did not attempt to address whether some of
these module parameters should be elevated to 64-bit parameters, because
the length of a long on 32-bit is 32-bit.
Lastly, it was pointed out during review that uint_t is a better match
for these variables than uint32_t because FreeBSD kernel parameter
definitions are designed for uint_t, whose bit width can change in
future memory models. As a result, we change the existing parameters
that are uint32_t to use uint_t.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13875
Coverity found a bug in `zfs_secpolicy_create_clone()` where it is
possible for us to pass an unterminated string when `zfs_get_parent()`
returns an error. Upon inspection, it is clear that using `strlcpy()`
would have avoided this issue.
Looking at the codebase, there are a number of other uses of `strncpy()`
that are unsafe and even when it is used safely, switching to
`strlcpy()` would make the code more readable. Therefore, we switch all
instances where we use `strncpy()` to use `strlcpy()`.
Unfortunately, we do not portably have access to `strlcpy()` in
tests/zfs-tests/cmd/zfs_diff-socket.c because it does not link to
libspl. Modifying the appropriate Makefile.am to try to link to it
resulted in an error from the naming choice used in the file. Trying to
disable the check on the file did not work on FreeBSD because Clang
ignores `#undef` when a definition is provided by `-Dstrncpy(...)=...`.
We workaround that by explictly including the C file from libspl into
the test. This makes things build correctly everywhere.
We add a deprecation warning to `config/Rules.am` and suppress it on the
remaining `strncpy()` usage. `strlcpy()` is not portably avaliable in
tests/zfs-tests/cmd/zfs_diff-socket.c, so we use `snprintf()` there as a
substitute.
This patch does not tackle the related problem of `strcpy()`, which is
even less safe. Thankfully, a quick inspection found that it is used far
more correctly than strncpy() was used. A quick inspection did not find
any problems with `strcpy()` usage outside of zhack, but it should be
said that I only checked around 90% of them.
Lastly, some of the fields in kstat_t varied in size by 1 depending on
whether they were in userspace or in the kernel. The origin of this
discrepancy appears to be 04a479f706 where
it was made for no apparent reason. It conflicts with the comment on
KSTAT_STRLEN, so we shrink the kernel field sizes to match the userspace
field sizes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13876
When receiving full/newfs on existing dataset, then it should be done
with "-F" flag. Its enforced for initial receive in checks done in
zfs_receive_one function of libzfs. Similarly, on resuming full/newfs
recv on existing dataset, it should be done with "-F" flag.
When dataset doesn't exist, then full/new recv is done on newly created
dataset and it's marked INCONSISTENT. But when receiving on existing
dataset, recv is first done on %recv and its marked INCONSISTENT.
Existing dataset is not marked INCONSISTENT. Resume of full/newfs
receive with dataset not INCONSISTENT indicates that its resuming newfs
on existing dataset. So, enforce "-F" flag in this case.
Also return an error from dmu_recv_resume_begin_check() in zfs kernel,
when its resuming full/newfs recv without force.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#13856Closes#13857
Clang's static analyzer found a bad free caused by skein_mac_atomic().
It will allocate a context on the stack and then pass it to
skein_final(), which attempts to free it. Upon inspection,
skein_digest_atomic() also has the same problem.
These functions were created to match the OpenSolaris ICP API, so I was
curious how we avoided this in other providers and looked at the SHA2
code. It appears that SHA2 has a SHA2Final() helper function that is
called by the exported sha2_mac_final()/sha2_digest_final() as well as
the sha2_mac_atomic() and sha2_digest_atomic() functions. The real work
is done in SHA2Final() while some checks and the free are done in
sha2_mac_final()/sha2_digest_final().
We fix the use after free in the skein code by taking inspiration from
the SHA2 code. We introduce a skein_final_nofree() that does most of the
work, and make skein_final() into a function that calls it and then
frees the memory.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13954
Recently, I have been making a push to fix things that coverity found.
However, I was curious what Clang's static analyzer reported, so I ran
it and found things that coverity had missed.
* contrib/pam_zfs_key/pam_zfs_key.c: If prop_mountpoint is passed more
than once, we leak memory.
* module/zfs/zcp_get.c: We leak memory on temporary properties in
userspace.
* tests/zfs-tests/cmd/draid.c: On error from vdev_draid_rand(), we leak
memory if best_map had been allocated by a prior iteration.
* tests/zfs-tests/cmd/mkfile.c: Memory used by the loop is not freed
before program termination.
Arguably, these are all minor issues, but if we ignore them, then they
could obscure serious bugs, so we fix them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13955
Coverity found a number of places where we either do MAX(unsigned, 0) or
do assertions that a unsigned variable is >= 0. These do nothing, so
let us drop them all.
It also found a spot where we do `if (unsigned >= 0 && ...)`. Let us
also drop the unsigned >= 0 check.
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13871
Coverity complained about this. An error from `hkdf_sha512()` before uio
initialization will cause pointers to uninitialized memory to be passed
to `zio_crypt_destroy_uio()`. This is a regression that was introduced
by cf63739191. Interestingly, this never
affected FreeBSD, since the FreeBSD version never had that patch ported.
Since moving uio initialization to the top of this function would slow
down the qat_crypt() path, we only move the `memset()` calls to the top
of the function. This is sufficient to fix this problem.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13944
Coverity complained about unchecked return values and unused values that
turned out to be unused return values.
Different approaches were used to handle the different cases of
unchecked return values:
* cmd/zdb/zdb.c: VERIFY0 was used in one place since the existing code
had no error handling. An error message was printed in another to
match the rest of the code.
* cmd/zed/agents/zfs_retire.c: We dismiss the return value with `(void)`
because the value is expected to be potentially unset.
* cmd/zpool_influxdb/zpool_influxdb.c: We dismiss the return value with
`(void)` because the values are expected to be potentially unset.
* cmd/ztest.c: VERIFY0 was used since we want failures if something goes
wrong in ztest.
* module/zfs/dsl_dir.c: We dismiss the return value with `(void)`
because there is no guarantee that the zap entry will always be there.
For example, old pools imported readonly would not have it and we do
not want to fail here because of that.
* module/zfs/zfs_fm.c: `fnvlist_add_*()` was used since the
allocations sleep and thus can never fail.
* module/zfs/zvol.c: We dismiss the return value with `(void)` because
we do not need it. This matches what is already done in the analogous
`zfs_replay_write2()`.
* tests/zfs-tests/cmd/draid.c: We suppress one return value with
`(void)` since the code handles errors already. The other return value
is handled by switching to `fnvlist_lookup_uint8_array()`.
* tests/zfs-tests/cmd/file/file_fadvise.c: We add error handling.
* tests/zfs-tests/cmd/mmap_sync.c: We add error handling for munmap, but
ignore failures on remove() with (void) since it is expected to be
able to fail.
* tests/zfs-tests/cmd/mmapwrite.c: We add error handling.
As for unused return values, they were all in places where there was
error handling, so logic was added to handle the return values.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13920
Incorrectly sizing the array of hash locks used to protect the
dbuf hash table can lead to contention and reduce performance.
We could unconditionally allocate a larger array for the locks
but it's wasteful, particularly for a low-memory system.
Instead, dynamically allocate the array of locks and scale
it based on total system memory.
Additionally, add a new `dbuf_mutex_cache_shift` module option
which can be used to override the hash lock array size. This is
disabled by default (dbuf_mutex_hash_shift=0) and can only be
set at module load time. The minimum target array size is set
to 8192, this matches the current constant value.
Note that the count of the dbuf hash table and count of the
mutex array were added to the /proc/spl/kstat/zfs/dbufstats
kstat.
Finally, this change removes the _KERNEL conditional checks.
These were not required since for the user space build there
is no difference between the kmem and vmem interfaces.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13928
This reverts commit 34dbc618f5. While this
change resolved the lock contention observed for certain workloads, it
inadventantly reduced the maximum hash inserts/removes per second. This
appears to be due to the slightly higher acquisition cost of a rwlock vs
a mutex.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Coverity complains about this. It is not a bug as long as we never shift
by more than 31, but it is not terrible to change the constants from 1
to 1ULL as clean up.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13914
get_user_ns() is only done once for each namespace, so put_user_ns()
should be done once too.
Fix two typos in user_namespace/user_namespace_002.ksh and
user_namespace/user_namespace_003.ksh.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#13918
For encrypted raw receive, objset creation is delayed until a call to
dmu_recv_stream(). ZFS_PROP_SHARESMB property requires objset to be
populated when calling zpl_earlier_version(). To correctly handle the
ZFS_PROP_SHARESMB property for encrypted raw receive, this change
delays setting the property.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13878
The FreeBSD project's coverity scans found dead code in `zfs_readdir()`.
Also, the comment above `zfs_readdir()` is out of date.
I fixed the comment and deleted all of the dead code, plus additional
dead code that was found upon review.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13924
The FreeBSD project's coverity scans found this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13923
Coverity complained about the format specifiers not matching variables.
In one case, the variable is a constant, so we fix it. In another, we
were missing an argument (about which coverity also complained).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13888
Coverity reported that we pass a pointer to zfsvfs to
`dmu_objset_disown()` after freeing zfsvfs in zfsvfs_create_impl() after
a failure in zfsvfs_init().
We have nearly identical duplicate versions of this code for FreeBSD and
Linux, but interestingly, the FreeBSD version of this code differs in
such a way that it does not suffer from this bug. We remove the
difference from the FreeBSD version to fix this bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13883
param_set_arc_free_target(SYSCTL_HANDLER_ARGS) and
param_set_arc_no_grow_shift(SYSCTL_HANDLER_ARGS) defined in
sysctl_os.c must be made available to arc_os.c.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#13915
There is an ongoing effort to eliminate this feature.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#13908
Apply similar options to BLAKE3 as it is done for zfs_fletcher_4_impl.
The zfs module parameter on Linux changes from icp_blake3_impl to
zfs_blake3_impl.
You can check and set it on Linux via sysfs like this:
```
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle [fastest] generic sse2 sse41 avx2
[bash]# echo sse2 > /sys/module/zfs/parameters/zfs_blake3_impl
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle fastest generic [sse2] sse41 avx2
```
The modprobe module parameters may also be used now:
```
[bash]# modprobe zfs zfs_blake3_impl=sse41
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle fastest generic sse2 [sse41] avx2
```
On FreeBSD the BLAKE3 implementation can be set via sysctl like this:
```
[bsd]# sysctl vfs.zfs.blake3_impl
vfs.zfs.blake3_impl: cycle [fastest] generic sse2 sse41 avx2
[bsd]# sysctl vfs.zfs.blake3_impl=sse2
vfs.zfs.blake3_impl: cycle [fastest] generic sse2 sse41 avx2 \
-> cycle fastest generic [sse2] sse41 avx2
```
This commit changes also some Blake3 internals like these:
- blake3_impl_ops_t was renamed to blake3_ops_t
- all functions are named blake3_impl_NAME() now
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13725
The zpl_fadvise() function was recently added and was not included
in the initial patch. Update it accordingly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13831
- Some optimizations for bqueue enqueue/dequeue.
- Added a fix to prevent deadlock when both bqueue_enqueue_impl()
and bqueue_dequeue() waits for signal to be triggered.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13855
Replace ZFS_ENTER and ZFS_VERIFY_ZP, which have hidden returns, with
functions that return error code. The reason we want to do this is
because hidden returns are not obvious and had caused some missing fail
path unwinding.
This patch changes the common, linux, and freebsd parts. Also fixes
fail path unwinding in zfs_fsync, zpl_fsync, zpl_xattr_{list,get,set}, and
zfs_lookup().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#13831
I see a few issues in the issue tracker that might be aided by being
able to turn this on. We have no module parameter for it, so I would
like to add one.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13874
We pass sizeof (struct redact_record *) rather than sizeof (struct
redact_record). Passing the pointer size is wrong.
Coverity caught this in two places.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13885
The assertions are racy and the use of `membar_exit()` did nothing to
fix that.
The helpers use atomic functions, so we cleverly get values from the
atomics that we can use to ensure that the assertions operate on the
correct values.
We also use `membar_producer()` prior to decrementing reference counts
so that operations that happened prior to a decrement to 0 will be
guaranteed to happen before the decrement on architectures that reorder
atomics.
This also slightly improves performance by eliminating unnecessary
reads, although I doubt it would be measurable in any benchmark.
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13880
These were reported by Coverity as "Read from pointer after free" bugs.
Presumably, it did not report it as a use-after-free bug because it does
not understand the inline assembly that implements the atomic
instruction.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13881
When reviewing #13875, I noticed that our FreeBSD code has an issue
where it converts from `int64_t` to `int` when calling
`vnlru_free{,_vfsops}()`. The result is that if the int64_t is `1 <<
36`, the int will be 0, since the low bits are 0. Even when some low
bits are set, a value such as `((1 << 36) + 1)` would truncate to 1,
which is wrong.
There is protection against this on 32-bit platforms, but on 64-bit
platforms, there is no check to protect us, so we add a check.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13882
Coverity pointed out that if we somehow receive SPA_FEATURE_NONE, we
will use a negative number as an array index. A defensive assertion
seems appropriate.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13872
Coverity complains about a "use-after-free" bug in
`dbuf_prefetch_indirect_done()` because we use a pointer value after
freeing its buffer. The pointer is used for refcounting in ARC (as the
reference holder). There is a theoretical situation where the pointer
would be reused in a way that causes the refcounting to collide, so we
change the order in which we call arc_buf_destroy() and
dbuf_prefetch_fini() to match the rest of the function. This prevents
the theoretical situation from being a possibility.
Also, we have a few return statements with a value, despite this being a
void function. We clean those up while we are making changes here.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13869
We inherited membar_consumer() and membar_producer() from OpenSolaris,
but we had replaced membar_consumer() with Linux's smp_rmb() in
zfs_ioctl.c. The FreeBSD SPL consequently implemented a shim for the
Linux-only smp_rmb().
We reinstate membar_consumer() in platform independent code and fix the
FreeBSD SPL to implement membar_consumer() in a way analogous to Linux.
Reviewed-by: Konstantin Belousov <kib@FreeBSD.org>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13843
Unused code detected by coverity.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13868
Coverity reported this as an out-of-bounds read.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13865
Coverty static analysis found these.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#10989Closes#13861
In our codebase, `cond_resched() and `schedule()` are Linux kernel
functions that have replaced the OpenSolaris `kpreempt()` functions in
the codebase to such an extent that `kpreempt()` in zfs_context.h was
broken. Nobody noticed because we did not actually use it. The header
had defined `kpreempt()` as `yield()`, which works on OpenSolaris and
Illumos where `sched_yield()` is a wrapper for `yield()`, but that does
not work on any other platform.
The FreeBSD platform specific code implemented shims for these, but the
shim for `schedule()` forced us to wait, which is different than merely
rescheduling to another thread as the original Linux code does, while
the shim for `cond_resched()` had the same definition as its kernel
kpreempt() shim.
After studying this, I have concluded that we should reintroduce the
kpreempt() function in platform independent code with the following
definitions:
- In the Linux kernel:
kpreempt(unused) -> cond_resched()
- In the FreeBSD kernel:
kpreempt(unused) -> kern_yield(PRI_USER)
- In userspace:
kpreempt(unused) -> sched_yield()
In userspace, nothing changes from this cleanup. In the kernels, the
function `fm_fini()` will now call `kern_yield(PRI_USER)` on FreeBSD and
`cond_resched()` on Linux. This is instead of `pause("schedule", 1)` on
FreeBSD and `schedule()` on Linux. This makes our behavior consistent
across platforms.
Note that Linux's SPL continues to use `cond_resched()` and
`schedule()`. However, those functions have been removed from both the
FreeBSD code and userspace code.
This should have the benefit of making it slightly easier to port the
code to new platforms by making how things should be mapped less
confusing.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13845
The function make_dev_s() was introduced to replace make_dev() in
FreeBSD 11.0. It allows further specification of properties and flags
and returns an error code on failure. Using this we can fail loading
the module more gracefully than a panic in situations such as when a
device named zfs already exists. We already use it for zvols.
Use make_dev_s() for /dev/zfs.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#13854
When iterating through children physical ashifts for vdev, prefer
ones above the maximum logical ashift, that we can actually use,
but within the administrator defined maximum.
When selecting top-level vdev ashift, do not set it to the defined
maximum in case physical ashift is even higher, but just ignore one.
Using the maximum does not prevent misaligned writes, but reduces
space efficiency. Since ZFS tries to write data sequentially and
aggregates the writes, in many cases large misanigned writes may be
not as bad as the space penalty otherwise.
Allow internal physical ashifts for vdevs higher than SHIFT_MAX.
May be one day allocator or aggregation could benefit from that.
Reduce zfs_vdev_max_auto_ashift default from 16 (64KB) to 14 (16KB),
so that ZFS may still use bigger ashifts up to SHIFT_MAX (64KB),
but only if it really has to or explicitly told to, but not as an
"optimization".
There are some read-intensive NVMe SSDs that report Preferred Write
Alignment of 64KB, and attempt to build RAIDZ2 of those leads to a
space inefficiency that can't be justified. Instead these changes
make ZFS fall back to logical ashift of 12 (4KB) by default and
only warn user that it may be suboptimal for performance.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#13798
The purpose of this PR is to accepts fadvise ioctl from userland
to do read-ahead by demand.
It could dramatically improve sequential read performance especially
when primarycache is set to metadata or zfs_prefetch_disable is 1.
If the file is mmaped, generic_fadvise is also called for page cache
read-ahead besides dmu_prefetch.
Only POSIX_FADV_WILLNEED and POSIX_FADV_SEQUENTIAL are supported in
this PR currently.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Finix Yan <yancw@info2soft.com>
Closes#13694
Upon inspection of our code, I noticed that we assume that
__alloc_percpu() cannot fail, and while it probably never has failed in
practice, technically, it can fail, so we should handle that.
Additionally, we incorrectly assume that `taskq_create()` in
spl_kmem_cache_init() cannot fail. The same remark applies to it.
Lastly, `spl-init()` failures should always return negative error
values, but in some places, we are returning positive 1, which is
incorrect. We change those values to their correct error codes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13847
There's no VSX handler on FreeBSD for now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Piotr Kubaj <pkubaj@FreeBSD.org>
Closes#13848
The only event hooked up is NOTE_ATTRIB, which is triggered when the
device is resized.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Wing <rew@FreeBSD.org>
Closes#13773
This will be used to implement kqfilter support for zvol cdevs.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Wing <rew@FreeBSD.org>
Closes#13773
This commit adds DD_FIELD string used in extensified dsl_dir zap object
for snapshots_changed property.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#13819
Only the single snapshot rename is provided.
The recursive or more complex rename can be scripted.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes#13802
FreeBSD had a few platform-specific ARC tunables in the wrong place:
- Move FreeBSD-specifc ARC tunables into the same vfs.zfs.arc node as
the rest of the ARC tunables.
- Move the handlers from arc_os.c to sysctl_os.c and add compat sysctls
for the legacy names.
While here, some additional clean up:
- Most handlers are specific to a particular variable and don't need a
pointer passed through the args.
- Group blocks of related variables, handlers, and sysctl declarations
into logical sections.
- Match variable types for temporaries in handlers with the type of the
global variable.
- Remove leftover comments.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#13756
It makes sense to free memory in smaller chunks when approaching
arc_c_min to let other kernel subsystems to free more, since after
that point we can't free anything. This also matches behavior on
Linux, where to shrinker reported only the size above arc_c_min.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#13794
The vfs_*_feature() macros turn anything that uses them into dead code,
so we can delete all of it.
As a side effect, zfs_set_fuid_feature() is now identical in
module/os/freebsd/zfs/zfs_vnops_os.c and
module/os/linux/zfs/zfs_vnops_os.c. A few other functions are identical
too. Future cleanup could move these into a common file.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13832
This reverts commit 80a650b7bb. This change
inadvertently introduced a regression in ztest where one of the new ASSERTs
is triggered in dsl_scan_visitbp().
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #12275Closes#13799
Currently, snapshots_changed property is stored in dd_props_zapobj, due
to which the property is assumed to be local. This causes a difference
in behavior with respect to other readonly properties.
This commit stores the snapshots_changed property in dd_object. Source
is not set to local in this case, which makes it consistent with other
readonly properties.
This commit also updates the date string format to include seconds.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#13785
When scrubbing an encrypted filesystem with unloaded key still report an
error in zpool status.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#13675Closes#13717
There are a couple changes included here. The first is to introduce
a cap on the size the ZED will grow the zevent list to. One million
entries is more than enough for most use cases, and if you are
overflowing that value, the problem needs to be addressed another
way. The value is also tunable, for those who want the limit to be
higher or lower.
The other change is to add a kernel module parameter that allows
snapshot creation/deletion to be exempted from the history logging;
for most workloads, having these things logged is valuable, but for
some workloads it produces large quantities of log spam and isn't
especially helpful.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Issue #13374Closes#13753
Linux sets relatime on mount by default for any file system,
but relatime=off in ZFS disables it explicitly.
Let's be consistent with other file systems on Linux.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#13614
Thanks to George Wilson for clarifying this on Slack.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Christian Schwarz <christian.schwarz@nutanix.com>
Closes#13698
As of the Linux 5.20 kernel blk_cleanup_disk() has been removed,
all callers should use put_disk().
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13728
As of the Linux 5.20 kernel bdevname() has been removed, all
callers should use snprintf() and the "%pg" format specifier.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13728
This is a small cleanup for a trivial problem which happened to
be noticed while another issue was being investigated.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#13730
Make dd_snap_cmtime property persistent across mount and unmount
operations by storing in ZAP and restore the value from ZAP on hold
into dd_snap_cmtime instead of updating it.
Expose dd_snap_cmtime as 'snapshots_changed' property that provides a
mechanism to quickly determine whether snapshot list for dataset has
changed without having to mount a dataset or iterate the snapshot list.
It specifies the time at which a snapshot for a dataset was last
created or deleted. This allows us to be more efficient how often we
query snapshots.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#13635
A symlink to i386 includes is created in the build dir on amd64 since
freebsd/freebsd-src@d07600c563
Tell git to ignore it like the other include links.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#13719
The checksum benchmarking on module load may take a really long time
on embedded systems with a slow cpu. Avoid all benchmarks >= 1MiB on
systems, where EdonR is slower then 300 MiB/s.
This limit is currently hardcoded via the define LIMIT_PERF_MBS.
This is the new benchmark output of a slow Intel Atom:
```
implementation 1k 4k 16k 64k 256k 1m 4m 16m
edonr-generic 209 257 268 259 262 0 0 0
skein-generic 129 150 151 150 150 0 0 0
sha256-generic 50 55 56 56 56 0 0 0
sha512-generic 76 86 88 89 88 0 0 0
blake3-generic 63 62 62 62 61 0 0 0
blake3-sse2 114 292 301 307 309 0 0 0
```
Reviewed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13695
This type of recv is used to heal corrupted data when a replica
of the data already exists (in the form of a send file for example).
With the provided send stream, corrective receive will read from
disk blocks described by the WRITE records. When any of the reads
come back with ECKSUM we use the data from the corresponding WRITE
record to rewrite the corrupted block.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@axcient.com>
Closes#9372
The file module/os/freebsd/zfs/zfs_ioctl_compat.c fails compiling
because of this error: 'static' is not at beginning of declaration
This commit fixes the three places within that file.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13702
- When iterating snapshots with name only, e.g., "-o name -s name",
libzfs uses simple snapshot iterator and results are displayed
in alphabetic order. This PR adds support for faster version of
createtxg sort by avoiding nvlist parsing for properties. Flags
"-o name -s createtxg" will enable createtxg sort while using
simple snapshot iterator.
- Added support to read createtxg property directly from zfs handle
for filesystem, volume and snapshot types instead of parsing nvlist.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13577
ZIL kstats are reported in an inclusive way, i.e., same counters are
shared to capture all the activities happening in zil. Added support
to report zil stats for every datset individually by combining them
with already exposed dataset kstats.
Wmsum uses per cpu counters and provide less overhead as compared
to atomic operations. Updated zil kstats to replace wmsum counters
to avoid atomic operations.
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13636
It may happen that scan bookmark points to a block that was turned
into a part of a big hole. In such case dsl_scan_visitbp() may skip
it and dsl_scan_check_resume() will not be called for it. As result
new scan suspend won't be possible until the end of the object, that
may take hours if the object is a multi-terabyte ZVOL on a slow HDD
pool, stretching TXG to all that time, creating all sorts of problems.
This patch changes the resume condition to any greater or equal block,
so even if we miss the bookmarked block, the next one we find will
delete the bookmark, allowing new suspend.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13643
Allocation via kmem_cache_alloc() is limited to less then 4m for
some architectures.
This commit limits the benchmarks with the linear abd cache to 1m
on all architectures and adds 4m + 16m benchmarks via non-linear
abd_alloc().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13669Closes#13670
Makes the case sensitivity setting visible on Linux in /proc/mounts.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13607
Specify the lua and zstd license text in the manor in which the
kernel MODULE_LICENSE macro requires it. The now duplicate entries
were merged and a comment added to make it clear what they apply to.
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13641
Fixes a small kernel memory leak which would occur if a pool failed
to import because the `DMU_POOL_VDEV_ZAP_MAP` key can't be read from
a presumably damaged MOS config. In the case of a missing key there
was no leak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Finix1979 <yancw@info2soft.com>
Closes#13629
Before this change for every valid parity column raidz_parity_verify()
allocated new buffer and copied there existing data, then recalculated
the parity and compared the result with the copy. This patch removes
the memory copy, simply swapping original buffer pointers with newly
allocated empty ones for parity recalculation and comparison. Original
buffers with potentially incorrect parity data are then just freed,
while new recalculated ones are used for repair.
On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this
change reduces memory traffic during scrub by 17% and total unhalted
CPU time by 25%.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13613
Issuing several scrub reads for a block we may use the parent ZIO
buffer for one of child ZIOs. If that read complete successfully,
then we won't need to copy the data explicitly. If block has only
one copy (typical for root vdev, which is also a mirror inside),
then we never need to copy -- succeed or fail as-is. Previous
code also copied data from buffer of every successfully completed
child ZIO, but that just does not make any sense.
On healthy N-wide mirror this saves all N+1 (or even more in case
of ditto blocks) memory copies for each scrubbed block, allowing
CPU to focus mostly on check-summing. For other vdev types it
should save one memory copy per block copy at root vdev.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13606
Follow up fix for a926aab902.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13348Closes#13610
If a dnode has a spill pointer, and we use DN_SLOTS_TO_BONUSLEN() then
we will possibly include the spill pointer in the len calculation and it
will be byteswapped. Then dnode_byteswap() will carry on and swap the
spill pointer again. Fix this by using DN_MAX_BONUS_LEN() instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#13002Closes#13015
Zp->z_mode is set at the same time inode->i_mode
is being changed. This has the effect of keeping both
in sync without relying on zfs_znode_update_vfs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yanping.gao <yanping.gao@xtaotech.com>
Closes#13581
Block statistics calculation during scrub I/O issue in case of sorted
scrub accounted ditto blocks several times. Embedded blocks on other
side were not accounted at all. This change moves the accounting from
issue to scan stage, that fixes both problems and also allows to avoid
pool-wide locking and the lock contention it created.
Since this statistics is quite specific and is not even exposed now
anywhere, disable its calculation by default to not waste CPU time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13579
Resolve straight-line speculation warnings reported by objtool
for x86_64 assembly on Linux when CONFIG_SLS is set. See the
following LWN article for the complete details.
https://lwn.net/Articles/877845/
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
Move the use of the db pointer after it is freed. It's only used as
a tag so a dereference would never occur, but there's no reason we
can't invert the order to resolve the warning.
module/zfs/dbuf.c: In function 'dbuf_destroy':
module/zfs/dbuf.c:2953:17: error:
pointer 'db' may be used after 'free' [-Werror=use-after-free]
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
Move the use of the private pointer after it is freed. It's only
used as a tag so a dereference would never occur, but there's no
harm in inverting the order to resolve the warning.
module/zfs/dbuf.c: In function 'dbuf_issue_final_prefetch_done':
module/zfs/dbuf.c:3204:17: error:
pointer 'private' may be used after 'free' [-Werror=use-after-free]
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
The memcpy(), memmove(), and memset() functions have been annotated
to perform bounds checking when using FORTIFY_SOURCE. A warning is
now generted when writing beyond the end of the specified field.
Alternately, the new struct_group() macro could be used to create
an anonymous union member for use by memcpy(). However, since this
is the only place the macro would be helpful it's preferable to
restructure the code slights to avoid the need for additional
compatibility code when the macro does not exist.
https://lore.kernel.org/lkml/20211118183807.1283332-1-keescook@chromium.org/T/
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
The wrong union memory was being accessed in EdonRInit resulting in
a write beyond size of field compiler warning. Reference the correct
member to resolve the warning. The warning was correct and this in
case the mistake was harmless.
In function ‘fortify_memcpy_chk’,
inlined from ‘EdonRInit’ at zfs/module/icp/algs/edonr/edonr.c:494:3:
./include/linux/fortify-string.h:344:25: error: call to
‘__write_overflow_field’ declared with attribute warning:
detected write beyond size of field (1st parameter);
maybe use struct_group()? [-Werror=attribute-warning]
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
Restructure the code in zfs_log_xvattr() to use a lr_attr_end
structure when accessing lr_attr_t elements located after the
variable sized array. This makes the code more understandable
and resolves the accessing beyond the end of the field warnings.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
This code should be kept inline with the upstream lua version as much
as possible. Therefore, we simply want to silence the warning. This
check was enabled by default as part of -Wall in gcc 12.1.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
The current codebase does not support raw sending buffers with block
size > 128kB when large_blocks is not active. This can happen in the
codepath dsl_dataset_sync()->dmu_objset_sync()->zio_nowait() which
calls back dmu_objset_write_done()->dsl_dataset_block_born(). If
dsl_dataset_sync() completes its run before dsl_dataset_block_born() is
called, we will end up not activating some of the necessary flags, while
having blocks based on those flags written in the filesystem. A
subsequent send will then panic.
Fix this by directly deciding in dmu_objset_sync() whether these flags
need to be activated later by dsl_dataset_sync(). Instead of panicking
due to a NULL pointer dereference in dmu_dump_write() in case of a send,
print out an error message. Also during scrub verify there are no
contradicting filesystem flags.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#12275Closes#12438
Change math to make it like the ARC, using multiplications instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13591
- Introduce first element offset within a leaf. It allows to reduce
by ~50% average memmove() size when adding/removing elements. If the
added/removed element is in the first half of the leaf, we may shift
elements before it and adjust the bth_first instead of moving more
elements after it.
- Use memcpy() instead of memmove() when we know there is no overlap.
- Switch from uint64_t to uint32_t. It does not limit anything,
but 32-bit arches should appreciate it greatly in hot paths.
- Store leaf capacity in struct btree to avoid 64-bit divisions.
- Adjust zfs_btree_insert_into_leaf() to always result in balanced
leaves after splitting, no matter where the new element was inserted.
Not that we care about it much, but it should also allow B-trees with
as little as two elements per leaf instead of 4 previously.
When scrubbing pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks this
reduces amount of time spent in memmove() inside the scan thread from
13.7% to 5.7% and total scrub time by ~15 seconds out of 9 minutes.
It should also reduce spacemaps load time, but I haven't measured it.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13582
- Reduce size and comparison complexity of q_exts_by_size B-tree.
Previous code used two 64-bit divisions and many other operations to
compare two B-tree elements. It created enormous overhead. This
implementation moves the math to the upper level and stores the score
in the B-tree elements themselves. Since all that we need to store in
that B-tree is the extent score and offset, those can fit into single
8 byte value instead of 24 bytes of q_exts_by_addr element and can be
compared with single operation.
- Better decouple secondary tree logic from main range_tree by moving
rt_btree_ops and related functions into dsl_scan.c as ext_size_ops.
Those functions are very small to worry about the code duplication and
range_tree does not need to know details such as rt_btree_compare.
- Instead of accounting number of pending bytes per pool, that needs
atomic on global variable per block, account the number of non-empty
per-vdev queues, that change much more rarely.
- When extent scan is interrupted by TXG end, continue it in the next
TXG instead of selecting next best extent. It allows to avoid leaving
one truncated (and so likely not the best any more) extent each TXG.
On top of some other optimizations this saves about 1.5 minutes out of
10 to scrub pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <caputit1@tcnj.edu>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13576
When scrubbing a raidz/draid pool, which contains a replacing or
sparing mirror with multiple online children, only one child will
be read. This is not normally a serious concern because the DTL
records are used to determine where a good copy of the data is.
As long as the data can be read from one child the mirror vdev
will use it to repair gaps in any of its children. Furthermore,
even if the data which was read is corrupt the raidz code will
detect this and issue its own repair I/O to correct the damage
in the mirror vdev.
However, in the scenario where the DTL is wrong due to silent
data corruption (say due to overwriting one child) and the scrub
happens to read from a child with good data, then the other damaged
mirror child will not be detected nor repaired.
While this is possible for both raidz and draid vdevs, it's most
pronounced when using draid. This is because by default the zed
will sequentially rebuild a draid pool to a distributed spare,
and the distributed spare half of the mirror is always preferred
since it delivers better performance. This means the damaged
half of the mirror will go undetected even after scrubbing.
For system administrations this behavior is non-intuitive and in
a worst case scenario could result in the only good copy of the
data being unknowingly detached from the mirror.
This change resolves the issue by reading all replacing/sparing
mirror children when scrubbing. When the BP isn't available for
verification, then compare the data buffers from each child. They
must all be identical, if not there's silent damage and an error
is returned to prompt the top-level vdev to issue a repair I/O to
rewrite the data on all of the mirror children. Since we can't
tell which child was wrong a checksum error is logged against the
replacing or sparing mirror vdev.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13555
The kmem_alloc(sizeof (*ctx), KM_NOSLEEP) call on FreeBSD can't be
used in this code segment. Work around this by pre-allocating a percpu
context array for later use.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13568
Handle crypto_dispatch() return values same as crp->crp_etype errors.
On FreeBSD 12 many drivers returned same errors both ways, and lack
of proper handling for the first ended up in assertion panic later.
It was changed in FreeBSD 13, but there is no reason to not be safe.
While there, skip waiting for completion, including locking and
wakeup() call, for sessions on synchronous crypto drivers, such as
typical aesni and software.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13563
Increase nlinks in stat results of ./zfs/snapshot based on snapshot
count. This provides quick and efficient method for administrators to
get snapshot counts without having to use libzfs or list the snapdir
contents.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrew Walker <awalker@ixsystems.com>
Closes#13559
During sorted scrub multiple threads (one per vdev) are issuing many
ZIOs same time, all using the same scn->scn_zio_root ZIO as parent.
It causes huge lock contention on the single global lock on that ZIO.
Improve it by introducing per-queue null ZIOs, children to that one,
and using them instead as proxy.
For 12 SSD pool storing 1.5TB of 4KB blocks on 80-core system this
dramatically reduces lock contention and reduces scrub time from 21
minutes down to 12.5, while actual read stages (not scan) are about
3x faster, reaching 100K blocks per second per vdev.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13553
When building modules (as well as the kernel) with ARCH=um, the options
-Dsetjmp=kernel_setjmp and -Dlongjmp=kernel_longjmp are passed to the C
preprocessor for C files. This causes the setjmp and longjmp used in
module/lua/ldo.c to be kernel_setjmp and kernel_longjmp respectively in
the object file. However, the setjmp and longjmp that is intended to be
called is defined in an architecture dependent assembly file under the
directory module/lua/setjmp. Since it is an assembly and not a C file,
the preprocessor define is not given and the names do not change. This
becomes an issue when modpost is trying to create the Module.symvers
and sees no defined symbol for kernel_setjmp and kernel_longjmp. To fix
this, if the macro CONFIG_UML is defined, then setjmp and longjmp
macros are undefined.
When building with ARCH=um for x86 sub-architectures, CONFIG_X86 is not
defined. Instead, CONFIG_UML_X86 is defined. Despite this, the UML x86
sub-architecture can use the same object files as the x86 architectures
because the x86 sub-architecture UML kernel is running with the same
instruction set as CONFIG_X86. So the modules/Kbuild build file is
updated to add the same object files that CONFIG_X86 would add when
CONFIG_UML_X86 is defined.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Closes#13547
```
os/linux/zfs/zvol_os.c:1111:3: error: ignoring return value of function
declared with 'warn_unused_result' attribute [-Werror,-Wunused-result]
add_disk(zv->zv_zso->zvo_disk);
^~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
zpl_xattr.c:1579:1: warning: no previous prototype for function
'zpl_posix_acl_release_impl' [-Wmissing-prototypes]
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#13551
This fd has nothing to do with cleanup, that's just the name of the
field in zfs_cmd_t that was used to pass it to the kernel.
Call it what it is, an fd for a user namespace.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes#13554
Since we use two B-trees q_exts_by_size and q_exts_by_addr, we should
count 2x sizeof (range_seg_gap_t) per node. And since average B-tree
memory efficiency is about 75%, we should increase it to 3x.
Previous code under-counted up to 30% of the memory usage.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13537
This allows ZFS datasets to be delegated to a user/mount namespace
Within that namespace, only the delegated datasets are visible
Works very similarly to Zones/Jailes on other ZFS OSes
As a user:
```
$ unshare -Um
$ zfs list
no datasets available
$ echo $$
1234
```
As root:
```
# zfs list
NAME ZONED MOUNTPOINT
containers off /containers
containers/host off /containers/host
containers/host/child off /containers/host/child
containers/host/child/gchild off /containers/host/child/gchild
containers/unpriv on /unpriv
containers/unpriv/child on /unpriv/child
containers/unpriv/child/gchild on /unpriv/child/gchild
# zfs zone /proc/1234/ns/user containers/unpriv
```
Back to the user namespace:
```
$ zfs list
NAME USED AVAIL REFER MOUNTPOINT
containers 129M 47.8G 24K /containers
containers/unpriv 128M 47.8G 24K /unpriv
containers/unpriv/child 128M 47.8G 128M /unpriv/child
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Will Andrews <will.andrews@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Buddy <https://buddy.works>
Closes#12263
