Historically, ZED has blindly spawned off zedlets in parallel and never
worried about their completion order. This means that you can
potentially have zedlets for event number 2 starting before zedlets for
event number 1 had finished. Most of the time this is fine, and it
actually helps a lot when the system is getting spammed with hundreds
of events.
However, there are times when you want your zedlets to be executed
in sequence with the event ID. That is where synchronous zedlets
come in.
ZED will wait for all previously spawned zedlets to finish before
running a synchronous zedlet. Synchronous zedlets are guaranteed to be
the only zedlet running. No other zedlets may run in parallel with a
synchronous zedlet. Users should be careful to only use synchronous
zedlets when needed, since they decrease parallelism.
To make a zedlet synchronous, simply add a "-sync-" immediately
following the event name in the zedlet's file name:
EVENT_NAME-sync-ZEDLETNAME.sh
For example, if you wanted a synchronous statechange script:
statechange-sync-myzedlet.sh
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17335
A single slow responding disk can affect the overall read
performance of a raidz group. When a raidz child disk is
determined to be a persistent slow outlier, then have it
sit out during reads for a period of time. The raidz group
can use parity to reconstruct the data that was skipped.
Each time a slow disk is placed into a sit out period, its
`vdev_stat.vs_slow_ios count` is incremented and a zevent
class `ereport.fs.zfs.delay` is posted.
The length of the sit out period can be changed using the
`raid_read_sit_out_secs` module parameter. Setting it to
zero disables slow outlier detection.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Contributions-by: Don Brady <don.brady@klarasystems.com>
Contributions-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17227
When attempting to debug performance problems on large systems, one of
the major factors that affect performance is free space
fragmentation. This heavily affects the allocation process, which is an
area of active development in ZFS. Unfortunately, fragmenting a large
pool for testing purposes is time consuming; it usually involves filling
the pool and then repeatedly overwriting data until the free space
becomes fragmented, which can take many hours. And even if the time is
available, artificial workloads rarely generate the same fragmentation
patterns as the natural workloads they're attempting to mimic.
This patch has two parts. First, in zdb, we add the ability to export
the full allocation map of the pool. It iterates over each vdev,
printing every allocated segment in the ms_allocatable range tree. This
can be done while the pool is online, though in that case the allocation
map may actually be from several different TXGs as new ones are loaded
on demand.
The second is a new subcommand for zhack, zhack metaslab leak (and its
supporting kernel changes). This is a zhack subcommand that imports a
pool and then modified the range trees of the metaslabs, allowing the
sync process to write them out normall. It does not currently store
those allocations anywhere to make them reversible, and there is no
corresponding free subcommand (which would be extremely dangerous); this
is an irreversible process, only intended for performance testing. The
only way to reclaim the space afterwards is to destroy the pool or roll
back to a checkpoint.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17576
Add a test case to reproduce issue #17277:
1. Make a pool
2. Write a file to the pool
3. Mount the file as a loopback device
4. Make an XFS filesystem on the loopback device
5. Mount the XFS filesystem... <hangs>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #17277Closes#17329
These are all the same shape: set up the pool to suspend on first write,
then perform some write+sync operation. The pool should suspend, and the
sync operation should respond according to the failmode= property.
We test fsync(), msync() and two forms of write() (open with O_SYNC, and
async with sync=always), which all take slightly different paths to
zil_commit() and back.
A helper function is included to do the write+sync sequence with mmap()
and msync(), since I didn't find a convenient tool to do that.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Based on previous commit this implements `zfs rewrite -P` flag,
making ZFS to keep blocks logical birth times while rewriting
files. It should exclude the rewritten blocks from incremental
sends, snapshot diffs, etc. Snapshots space usage same time will
reflect the additional space usage from newly allocated blocks.
Since this begins to use new "rewrite" flag in the block pointers,
this commit introduces a new read-compatible per-dataset feature
physical_rewrite. It must be enabled for the command to not fail,
it is activated on first use and deactivated on deletion of the
last affected dataset.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17565
This feature enables tracking of when TXGs are committed to disk,
providing an estimated timestamp for each TXG.
With this information, it becomes possible to perform scrubs based
on specific date ranges, improving the granularity of data
management and recovery operations.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16853
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584
Add support for the '-a | --all' option to perform trim,
scrub, and initialize operations on all pools.
Previously, specifying a pool name was mandatory for
these operations. With this enhancement, users can now
execute these operations across all pools at once,
without needing to manually iterate over each pool
from the command line.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#17524
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17537
ZFS gang block headers are currently fixed at 512 bytes. This is
increasingly wasteful in the era of larger disk sector sizes. This PR
allows any size allocation to work as a gang header. It also contains
supporting changes to ZDB to make gang headers easier to work with.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17004
special_small_blocks is applied to blocks after compression, so it
makes no sense to demand its values to be power of 2. At most
they could be multiple of 512, but that would still buy us nothing,
so lets allow them be any within SPA_MAXBLOCKSIZE.
Also special_small_blocks does not really need to depend on the
set recordsize, enabled pool features or presence of special vdev.
At worst in any of those cases it will just do nothing, so we
should not complicate users lives by artificial limitations.
While there, polish comments for recordsize and volblocksize.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17497
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17473
While FreeBSD itself does not support projects, there is no reason
why it can't be controlled via `zfs project` and other subcommands.
Most of the code is actually already there and just needs some
revival and sync with Linux, plus enabling some tests not depending
on the OS support.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17423
Fairly coarse, but if it returns while the pool suspends, it must be
with an error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17426
As commit 320f0c6 did for Linux, connect POSIX_FADV_WILLNEED
up to dmu_prefetch() on FreeBSD.
While there, fix portability problems in tests/functional/fadvise.
1. Instead of relying on the numerical values of POSIX_FADV_XXX macros,
accept macro names as arguments to the file_fadvise program. (The
numbers happen to match on Linux and FreeBSD, but future systems may
vary and it seems a little strange/raw to count on that.)
2. For implementation reasons, SEQUENTIAL doesn't reach ZFS via FreeBSD
VFS currently (perhaps something that should be investigated in
FreeBSD). Since on Linux we're treating SEQUENTIAL and WILLNEED the
same, it doesn't really matter which one we use, so switch the test
over to WILLNEED exercise the new prefetch code on both OSes the
same way.
Reviewed-by: Mateusz Guzik <mjg@FreeBSD.org>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Thomas Munro <tmunro@FreeBSD.org>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Closes#17379
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
It was reported that channel programs' zfs.get_prop doesn't work for
dataset properties encryption and encryptionroot.
They are handled in get_special_prop due to the need to call
dsl_dataset_crypt_stats to load those dsl props.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Co-authored-by: Graham Christensen <graham@grahamc.com>
Closes#17280
This test covers a bug fixed by commit ea74cde: performing an
incremental non-raw send from an encrypted filesystem followed by
exporting the pool. Before that commit, exporting the sending pool
in this scenario would trigger a panic:
VERIFY(avl_is_empty(&sk->sk_dsl_keys)) failed
PANIC at dsl_crypt.c:353:spa_keystore_fini()
Call Trace:
spl_dumpstack+0x29/0x2f [spl]
spl_panic+0xd1/0xe9 [spl]
spl_assert.constprop.0+0x1a/0x30 [zfs]
spa_keystore_fini+0xc2/0xf0 [zfs]
spa_deactivate+0x25f/0x610 [zfs]
spa_evict_all+0xf4/0x200 [zfs]
spa_fini+0x13/0x140 [zfs]
zfs_kmod_fini+0x72/0xc0 [zfs]
openzfs_fini_os+0x13/0x3a [zfs]
openzfs_fini+0x9/0x6b8 [zfs]
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#17366
This allows to rewrite content of specified file(s) as-is without
modifications, but at a different location, compression, checksum,
dedup, copies and other parameter values. It is faster than read
plus write, since it does not require data copying to user-space.
It is also faster for sync=always datasets, since without data
modification it does not require ZIL writing. Also since it is
protected by normal range range locks, it can be done under any
other load. Also it does not affect file's modification time or
other properties.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
When forced to resort to ganging, ZFS currently allocates three child
blocks, each one third of the size of the original. This is true
regardless of whether larger allocations could be made, which would
allow us to have fewer gang leaves. This improves performance when
fragmentation is high enough to require ganging, but not so high that
all the free ranges are only just big enough to hold a third of the
recordsize. This is also useful for improving the behavior of a future
change to allow larger gang headers.
We add the ability for the allocation codepath to allocate a range of
sizes instead of a single fixed size. We then use this to pre-allocate
the DVAs for the gang children. If those allocations fail, we fall back
to the normal write path, which will likely re-gang.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
It's possible for two spares to get attached to a single failed vdev.
This happens when you have a failed disk that is spared, and then you
replace the failed disk with a new disk, but during the resilver
the new disk fails, and ZED kicks in a spare for the failed new
disk. This commit checks for that condition and disallows it.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #16547Closes: #17231
With the advent of fast dedup, there are no longer separate dedup tables
for different copies values. There is now logic that will add DVAs to
the dedup table entry if more copies are needed for new writes. However,
this interacts poorly with ganging. There are two different cases that
can result in mixed gang/non-gang BPs, which are illegal in ZFS.
This change modifies updates of existing FDT; if there are already gang
DVAs in the FDT, we prevent the new write from extending the DDT
entry. We cannot safely mix different gang trees in one block
pointer. if there are non-gang DVAs in the FDT, then this allocation may
not be gangs. If it would gang, we have to redo the whole write as a
non-dedup write.
This change also fixes a refcount leak that could occur if the lead DDT
write failed.
Sponsored by: iXsystems, Inc.
Sponsored-by: Klara, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes: #17123
Various tools will display draid vdev names with parameters embedded in
them, but would not accept them as valid vdev names when looking them
up, making it difficult to build pipelines involving draid vdevs.
This commit makes it so that if a full draid name is offered for match,
it gets truncated at the first ':' character.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Extend project quota test coverage to verify defaultprojectquota
behavior. These build on existing project quota tests with additional
cases specific to defaultprojectquota functionality.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Extend test coverage to verify default user and group quota
functionality. These build on existing user/group quota tests with
additional cases specific to default quotas functionality.
Added on top of: https://github.com/openzfs/zfs/pull/16283/commits/e08cd97
Signed-off-by: Todd Seidelmann <seidelma@wharton.upenn.edu>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The redundant_metadata setting in ZFS allows users to trade resilience
for performance and space savings. This applies to all data and metadata
blocks in zfs, with one exception: gang blocks. Gang blocks currently
just take the copies property of the IO being ganged and, if it's 1,
sets it to 2. This means that we always make at least two copies of a
gang header, which is good for resilience. However, if the users care
more about performance than resilience, their gang blocks will be even
more of a penalty than usual.
We add logic to calculate the number of gang headers copies directly,
and store it as a separate IO property. This is stored in the IO
properties and not calculated when we decide to gang because by that
point we may not have easy access to the relevant information about what
kind of block is being stored. We also check the redundant_metadata
property when doing so, and use that to decide whether to store an extra
copy of the gang headers, compared to the underlying blocks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
This PR condenses the FDT dedup log syncing into a single sync
pass. This reduces the overhead of modifying indirect blocks for the
dedup table multiple times per txg. In addition, changes were made to
the formula for how much to sync per txg. We now also consider the
backlog we have to clear, to prevent it from growing too large, or
remaining large on an idle system.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Authored-by: Don Brady <don.brady@klarasystems.com>
Authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17038
This statx(2) mask returns the alignment restrictions for O_DIRECT
access on the given file.
We're expected to return both memory and IO alignment. For memory, it's
always PAGE_SIZE. For IO, we return the current block size for the file,
which is the required alignment for an arbitrary block, and for the
first block we'll fall back to the ARC when necessary, so it should
always work.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16972
The new Fast Dedup feature has a lot of moving parts, and only some of
them have tests. We have some tests for prefetch and quota, and a
generic ZAP shrinking test, but we don't have anything for the pruning
command or specific to DDT zap shrinking. Here we add a couple small new
tests for zpool ddtprune and DDT-specific ZAP shrinking.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17049
The config file value overrides any set by the operator, making it quite
difficult to put the test output elsewhere. The default is
/var/tmp/test_results (via BASEDIR in test-runner) so this shouldn't
change anything for the default case.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
This commit adds tests that ensure that the ICP crypto_encrypt() and
crypto_decrypt() produce the correct results for all implementations
available on this platform.
The actual ZTS scripts are simple drivers for the crypto_test program in
it's "correctness" mode. This mode takes a file full of test vectors
(inputs and expected outputs), runs them, and checks that the results
are expected. It will run the tests for each implementation of the
algorithm provided by the ICP.
The test vectors are taken from Project Wycheproof, which provides a
huge number of tests, including exercising many edge cases and common
implementation mistakes. These tests are provided are JSON files, so a
program is included here to convert them into a simpler line-based
format for crypto_test to consume.
crypto_test also has a "performance" mode, which will run simple
benchmarks against all implementations provded by the ICP and output
them for comparison. This is not used by ZTS, but is available to assist
with development of new implementations of the underlying primitives.
Thanks-to: Joel Low <joel@joelsplace.sg>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Don't try to get mg of hole vdev in removal
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17080
Introduced functionality to recursively mount datasets with a new
config option `mount_recursively`. Adjusted existing functions to
handle the recursive behavior and added tests to validate the feature.
This enhances support for managing hierarchical ZFS datasets within
a PAM context.
Signed-off-by: Jerzy Kołosowski <jerzy@kolosowscy.pl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Originally #16856 updated Linux Direct I/O requests to use the new
pin_user_pages API. However, it was an oversight that this PR only
handled iov_iter's of type ITER_IOVEC and ITER_UBUF. Other iov_iter
types may try and use the pin_user_pages API if it is available. This
can lead to panics as the iov_iter is not being iterated over correctly
in zfs_uio_pin_user_pages().
Unfortunately, generic iov_iter API's that call pin_user_page_fast() are
protected as GPL only. Rather than update zfs_uio_pin_user_pages() to
account for all iov_iter types, we can simply just call
zfs_uio_get_dio_page_iov_iter() if the iov_iter type is not ITER_IOVEC
or ITER_UBUF. zfs_uio_get_dio_page_iov_iter() calls the
iov_iter_get_pages() calls that can handle any iov_iter type.
In the future it might be worth using the exposed iov_iter iterator
functions that are included in the header iov_iter.h since v6.7. These
functions allow for any iov_iter type to be iterated over and advanced
while applying a step function during iteration. This could possibly be
leveraged in zfs_uio_pin_user_pages().
A new ZFS test case was added to test that a ITER_BVEC is handled
correctly using this new code path. This test case was provided though
issue #16956.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16956Closes#17006
Injecting a device probe failure is not possible by matching IO types,
because probe IO goes to the label regions, which is explicitly excluded
from injection. Even if it were possible, it would be awkward to do,
because a probe is sequence of reads and writes.
This commit adds a new IO "type" to match for injection, which looks for
the ZIO_FLAG_PROBE flag instead. Any probe IO will be match the
injection record and recieve the wanted error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
When building tests with zinject, it can be quite difficult to work out
if you're producing the right kind of IO to match the rules you've set
up.
So, here we extend injection records to count the number of times a
handler matched the operation, and how often an error was actually
injected (ie after frequency and other exclusions are applied).
Then, display those counts in the `zinject` output.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16938
Added in b1e46f869, but empty, so no point keeping it around.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16931
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16926
Similar to what we saw in #16569, we need to consider that a
replacing vdev should not be considered as fully contributing
to the redundancy of a raidz vdev even though current IO has
enough redundancy.
When a failed vdev_probe() is faulting a disk, it now checks
if that disk is required, and if so it suspends the pool until
the admin can return the missing disks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16864
Confirming that clearing pool and vdev userprops produce the same
result: an empty value, with default source.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16887
Same as writes block cloning can increase block size and number of
indirection levels. That means it can dirty block 0 at level 0 or
at new top indirection level without explicitly holding them.
A block cloning test case for large offsets has been added.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16825
Add a LUKS sanity test to trigger: #16631
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16681
This fixes an oversight in the Direct I/O PR. There is nothing that
stops a process from manipulating the contents of a buffer for a
Direct I/O read while the I/O is in flight. This can lead checksum
verify failures. However, the disk contents are still correct, and this
would lead to false reporting of checksum validation failures.
To remedy this, all Direct I/O reads that have a checksum verification
failure are treated as suspicious. In the event a checksum validation
failure occurs for a Direct I/O read, then the I/O request will be
reissued though the ARC. This allows for actual validation to happen and
removes any possibility of the buffer being manipulated after the I/O
has been issued.
Just as with Direct I/O write checksum validation failures, Direct I/O
read checksum validation failures are reported though zpool status -d in
the DIO column. Also the zevent has been updated to have both:
1. dio_verify_wr -> Checksum verification failure for writes
2. dio_verify_rd -> Checksum verification failure for reads.
This allows for determining what I/O operation was the culprit for the
checksum verification failure. All DIO errors are reported only on the
top-level VDEV.
Even though FreeBSD can write protect pages (stable pages) it still has
the same issue as Linux with Direct I/O reads.
This commit updates the following:
1. Propogates checksum failures for reads all the way up to the
top-level VDEV.
2. Reports errors through zpool status -d as DIO.
3. Has two zevents for checksum verify errors with Direct I/O. One for
read and one for write.
4. Updates FreeBSD ABD code to also check for ABD_FLAG_FROM_PAGES and
handle ABD buffer contents validation the same as Linux.
5. Updated manipulate_user_buffer.c to also manipulate a buffer while a
Direct I/O read is taking place.
6. Adds a new ZTS test case dio_read_verify that stress tests the new
code.
7. Updated man pages.
8. Added an IMPLY statement to zio_checksum_verify() to make sure that
Direct I/O reads are not issued as speculative.
9. Removed self healing through mirror, raidz, and dRAID VDEVs for
Direct I/O reads.
This issue was first observed when installing a Windows 11 VM on a ZFS
dataset with the dataset property direct set to always. The zpool
devices would report checksum failures, but running a subsequent zpool
scrub would not repair any data and report no errors.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16598
