Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: David Quigley <david.quigley@intel.com>
This review covers the reading and writing of compressed arc headers, sharing
data between the arc_hdr_t and the arc_buf_t, and the implementation of a new
dbuf cache to keep frequently access data uncompressed.
I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs
off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block
for that DVA. The physical block may or may not be compressed. If compressed
arc is enabled and the block on-disk is compressed, then the b_pdata will match
the block on-disk and remain compressed in memory. If the block on disk is not
compressed, then neither will the b_pdata. Lastly, if compressed arc is
disabled, then b_pdata will always be an uncompressed version of the on-disk
block.
Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict
any arc_buf_t's that are no longer referenced. This means that the arc will
primarily have compressed blocks as the arc_buf_t's are considered overhead and
are always uncompressed. When a consumer reads a block we first look to see if
the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new
arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If
the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t
and bcopy the uncompressed contents from the first arc_buf_t to the new one.
Writing to the compressed arc requires that we first discard the b_pdata since
the physical block is about to be rewritten. The new data contents will be
passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we
will copy the physical block contents to a newly allocated b_pdata.
When an l2arc is inuse it will also take advantage of the b_pdata. Now the
l2arc will always write the contents of b_pdata to the l2arc. This means that
when compressed arc is enabled that the l2arc blocks are identical to those
stored in the main data pool. This provides a significant advantage since we
can leverage the bp's checksum when reading from the l2arc to determine if the
contents are valid. If the compressed arc is disabled, then we must first
transform the read block to look like the physical block in the main data pool
before comparing the checksum and determining it's valid.
OpenZFS-issue: https://www.illumos.org/issues/6950
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0
Issue #5078
Several assignments to arc_c had no effect because it is ultimately
initialized to arc_c_max.
This aligns ZoL better with the upstream code which removed these
assignments some time ago.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@onlight.com>
Closes#5081
In case sav->sav_config was NULL the body of the function
would skip the iteration of the l2 cache devices and will
just cleanup the old devices. However, this wasn't very obvious
since the null check was performed after the loop body and after
the old devices were cleaned. Refactor the code so that it's now
obvious when the iteration of the l2cache devices is skipped.
This fixes the following cppcheck warning:
[module/zfs/spa.c:1552]: (error) Possible null pointer dereference: newvdevs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Closes#5087
Since they're allocated with spa_strdup(), they should be freed with
spa_strfree() so the proper length buffer is freed.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5082Closes#5086
When errors are detected 'make lint' should return a non-zero
error code. The value 2 was chosen to indicate these are warnings
and not fatal.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Don Brady <don.brady@intel.com>
OpenZFS-issue: https://www.illumos.org/issues/6950
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dcbf3bd6
Delphix-commit: https://github.com/delphix/delphix-os/commit/978ed49Closes#4929
ZFS Test Suite Performance Regression Tests
This was pulled into OpenZFS via the compressed arc featureand was
separated out in zfsonlinux as a separate pull request from PR-4768.
It originally came in as QA-4903 in Delphix-OS from John Kennedy.
Expected Usage:
$ DISKS="sdb sdc sdd" zfs-tests.sh -r perf-regression.run
Porting Notes:
1. Added assertions in the setup script to make sure required tools
(fio, mpstat, ...) are present.
2. For the config.json generation in perf.shlib used arcstats and
other binaries instead of dtrace to query the values.
3. For the perf data collection:
- use "zpool iostat -lpvyL" instead of the io.d dtrace script
(currently not collecting zfs_read/write latency stats)
- mpstat and iostat take different arguments
- prefetch_io.sh is a placeholder that uses arcstats instead of
dtrace
4. Build machines require fio, mdadm and sysstat pakage (YMMV).
Future Work:
- Need a way to measure zfs_read and zfs_write latencies per pool.
- Need tools to takes two sets of output and display/graph the
differences
- Bring over additional regression tests from Delphix
When using real devices, specify DISKS="sdb sdc sdd" opposed to
/dev/sdb in zfs-tests.sh - otherwise errors with directory names and
disk names registering as "/dev//dev/sdb" for some tests. The same
goes for mpath: DISK="mpatha mpathad mpathb"
Expected Usage:
$ DISKS="sdb sdc sdd" zfs-tests.sh
SLICE_PREFIX is now set as "p" for a loop device (ie loop0p2) or
"" for a real device (ie sdb2), or either for multipath devices
(ie mpatha1 or mpath1p1) instead of only "p" by default. Note that
kpartx partitioning is not currently supported in this patch
(ie "partx") and may need to be disabled on Debian distributions.
Functions added for determining test directory (/dev or /dev/mapper)
as well as slice prefix are determined and exported mostly in the cfg
file of each test group directory.
Currently zpools cannot be created on whole mpath devices that have
been partitioned. In order to fix this tests have either been revised
to use a partition instead, or if there is a size constraint and the
pool needs to be created on the whole disk, partitions are then deleted
if the device is a multipath device. This functionality is added to
default_cleanup() or to individual cleanup scripts if a non-default
cleanup method is used.
The max partitions is currently set at 8 to account for all of the
tests thus far.
Patch changes are generally encompassed in "if is_linux" construct.
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Reviewed-by: John Salinas <John.Salinas@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Closes#4447Closes#4964Closes#5074
This first phase brings over the ZFS SLM module, zfs_mod.c, to handle
auto operations in response to disk events. Disk event monitoring is
provided from libudev and generates the expected payload schema for
zfs_mod. This work leverages the recently added devid and phys_path
strings in the vdev label.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#4673
These allocations can never fail. Leaving the error handling
code here gives the impression they can so it has been removed.
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5048
Always free mnpt memory on failure in the zfs_unmount() function.
In the zfs_unshare_proto() function mountpoint is a const and
should not be assigned.
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5054
perf: 2.75x faster ddt_entry_compare()
First 256bits of ddt_key_t is a block checksum, which are expected
to be close to random data. Hence, on average, comparison only needs to
look at first few bytes of the keys. To reduce number of conditional
jump instructions, the result is computed as: sign(memcmp(k1, k2)).
Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} ,
which is computed efficiently. Synthetic performance evaluation of
original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R)
CPU E5-2660 v3:
old 6.85789 s
new 2.49089 s
perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare()
Compute the result directly instead of using conditionals
perf: zfs_range_compare()
Speedup between 1.1x - 2.5x, depending on compiler version and
optimization level.
perf: spa_error_entry_compare()
`bcmp()` is not suitable for comparator use. Use `memcmp()` instead.
perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare()
perf: 2.8x faster zil_bp_compare()
perf: 2.8x faster mze_compare()
perf: faster dbuf_compare()
perf: faster compares in spa_misc
perf: 2.8x faster layout_hash_compare()
perf: 2.8x faster space_reftree_compare()
perf: libzfs: faster avl tree comparators
perf: guid_compare()
perf: dsl_deadlist_compare()
perf: perm_set_compare()
perf: 2x faster range_tree_seg_compare()
perf: faster unique_compare()
perf: faster vdev_cache _compare()
perf: faster vdev_uberblock_compare()
perf: faster fuid _compare()
perf: faster zfs_znode_hold_compare()
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Richard Elling <richard.elling@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5033
The argument processing is zhack makes the assumption that getopt()
will not permute argv. This isn't true for the GNU implementation of
getopt() unless the optstring is prefixed with a '+'. In which case
this is equivalent to setting the POSIXLY_CORRECT environment variable
In addition, update the usage() and optstrings to reflect the existing
supported options.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: liaoyuxiangqin <guo.yong33@zte.com.cn>
Closes#5047
Older versions of blkid may not promptly detect ZFS labels when
they're located on partitions. In order to ensure this test passes
reliably always perform a scan of default search paths (-s).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: liaoyuxiangqin <guo.yong33@zte.com.cn>
Closes#4987Closes#5047
`zpool get guid,freeing,leaked` shows SOURCE as `default`, it should
be `-` as those props are not editable.
Changed code to not overwrite `src` for `ZPOOL_PROP_VERSION`, so it
stays `ZPROP_SRC_NONE`. Make src const to avoid future mistakes
Signed-off-by: Hajo Möller <dasjoe@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4170
Issues:
Under Linux, when executing zfs_destroy_004.ksh destroy $fs is an
error. The key issue here is that illumos kernel treats this case
differently than the Linux kernel. On illumos you can unmount and
destroy a filesystem which is busy and all consumers of it get EIO.
On Linux the expected behavior is to prevent the unmount and destroy.
Cause analysis:
When create $fs file system and mount file system to $mntp.
cd $mntp, linux isn't allow to destroy $fs in this mount contents.
No matter what destroy with parameters.
Solution:
So log_mustnot $ZFS destroy $fs is ok.
cd $olddir and destroy $fs.
Signed-off-by: caoxuewen cao.xuewen@zte.com.cn
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5012
As the scripts zfs_create_003_pos.ksh and zfs_create_006_pos.ksh can
run successfully in the linux, add them to the <linux.run> file to
increase test scene.
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5002
Add helpers which automatically retry the provided command when
the error message matches the provided keyword. This provides an
easy way to handle the asynchronous nature of some ZFS commands.
For example, the `zfs destroy` command may need to be retried in
the case where the block device is unexpected busy. This can be
accomplished as follows:
log_must_busy $ZFS destroy ...
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5002
Update zfs_mount_005_pos.ksh and zfs_mount_010_neg.ksh to reflect
the expected Linux behavior. The is_linux wrapper is used so the
test case may be used on Linux and non-Linux platforms.
Signed-off-by: liuhuang <liu.huang@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5000
zfsctl_snapdir_inactive is defined in zfs-0.6.3. In zfs-0.6.5.7
this is declaration remains even though the implementation was
removed in commit 278bee93. Removed fastreboot_disable_highpil
which is also unused.
Signed-off-by: caoxuewen cao.xuewen@zte.com.cn
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5042
From user perspective, I would expect that ZFS is always able
to remove files and directories even when the quota is exceeded.
Authored by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6940
OpenZFS-issue: https://www.illumos.org/issues/6334
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/9918916Closes#5044
For quite some time I was thinking about possibility to prefetch
ZFS indirection tables while doing sequential reads or writes.
Recent changes in predictive prefetcher made that much easier to
do. My tests on zvol with 16KB block size on 5x striped and 2x
mirrored pool of 10 disks show almost double throughput on sequential
read, and almost tripple on sequential rewrite. While for read alike
effect can be received from increasing maximal prefetch distance
(though at higher memory cost), for rewrite there is no other
solution so far.
Authored by: Alexander Motin <mav@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6322
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/cb92f413Closes#5040
Porting notes:
- Change from upstream in module/zfs/dbuf.c in 'int dbuf_read' due
to commit 5f6d0b6 'Handle block pointers with a corrupt logical size'
- Difference from upstream in module/zfs/dmu_zfetch.c,
uint32_t zfetch_max_idistance -> unsigned int zfetch_max_idistance
- Variables have been initialized at the beginning of the function
(void dmu_zfetch) to resemble the order of occurrence and account
for C99, C11 mode errors.
In dbuf_dirty(), we need to grab the dn_struct_rwlock before looking at
the db_blkptr, to prevent it from being changed by syncing context.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7086
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/98fa317Closes#5039
This fix resolves warnings reported during compiling with different gcc
optimization levels in debug mode,
Test tools:
gcc version 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC)
Linux version: 2.6.32-573.18.1.el6.x86_64, Red Hat Enterprise Linux Server release 6.1 (Santiago)
List of warnings:
CFLAGS=-O1 ./configure --enable-debug ;make
../../module/icp/core/kcf_sched.c: In function ‘kcf_aop_done’:
../../module/icp/core/kcf_sched.c:499: error: ‘fg’ may be used uninitialized in this function
../../module/icp/core/kcf_sched.c:499: note: ‘fg’ was declared here
CFLAGS=-Os ./configure --enable-debug ; make
libzfs_dataset.c: In function ‘zfs_prop_set_list’:
libzfs_dataset.c:1575: error: ‘nvl_len’ may be used uninitialized in this function
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5022
The user space implementation of cv_timedwait_hires() was always passing
a relative time to pthread_cond_timedwait() when an absolute time is
expected. This was accidentally introduced in commit 206971d2.
Replace two magic values with their corresponding preprocessor macro.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#5024
ARC will evict meta buffers that exceed the arc_meta_limit. Before a further
investigating on whether we should take special protection on meta buffers,
this tunable make arc_meta_limit adjustable for different workloads.
People can set zfs_arc_meta_limit_percent to any value while insmod zfs.ko,
so some range check is added to guarantee a suitable arc_meta_limit.
Suggested by Tim Chase, zfs_arc_dnode_limit is changed to a percent-style
tunable as well.
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4957
As is the case with traverse_prefetch_thread(), the deep stacks caused
by traversal require disabling reclaim in the send traverse thread.
Also, do the same for receive_writer_thread() in which similar problems
have been observed.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4912Closes#4998
If the loop index i comes to (ZFS_GET_NCOLS - 1), the cbp->cb_columns[i + 1]
actually read the data of cbp->cb_colwidths[0], which means the array
subscript is above array bounds.
Luckily the cbp->cb_colwidths[0] is always 0 and it seems we haven't
looped enough times to exceed the array bounds so far, but it's really
a secluded risk someday.
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5003
API Change: Module parameter set/get methods take const parameter in
Grsecurity kernel v4.7.1
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Jason Zaman <jason@perfinion.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4997Closes#5001
Using a benchmark which has 32 threads creating 2 million files in the
same directory, on a machine with 16 CPU cores, I observed poor
performance. I noticed that dmu_tx_hold_zap() was using about 30% of
all CPU, and doing dnode_hold() 7 times on the same object (the ZAP
object that is being held).
dmu_tx_hold_zap() keeps a hold on the dnode_t the entire time it is
running, in dmu_tx_hold_t:txh_dnode, so it would be nice to use the
dnode_t that we already have in hand, rather than repeatedly calling
dnode_hold(). To do this, we need to pass the dnode_t down through
all the intermediate calls that dmu_tx_hold_zap() makes, making these
routines take the dnode_t* rather than an objset_t* and a uint64_t
object number. In particular, the following routines will need to have
analogous *_by_dnode() variants created:
dmu_buf_hold_noread()
dmu_buf_hold()
zap_lookup()
zap_lookup_norm()
zap_count_write()
zap_lockdir()
zap_count_write()
This can improve performance on the benchmark described above by 100%,
from 30,000 file creations per second to 60,000. (This improvement is on
top of that provided by working around the object allocation issue. Peak
performance of ~90,000 creations per second was observed with 8 CPUs;
adding CPUs past that decreased performance due to lock contention.) The
CPU used by dmu_tx_hold_zap() was reduced by 88%, from 340 CPU-seconds
to 40 CPU-seconds.
Sponsored by: Intel Corp.
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7004
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/109Closes#4641Closes#4972
zap_lockdir() / zap_unlockdir() should take a "void *tag" argument which
tags the hold on the zap. This will help diagnose programming errors
which misuse the hold on the ZAP.
Sponsored by: Intel Corp.
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Pavel Zakharov <pavel.zakha@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7003
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/108Closes#4972
When spa retry load succeeds and spa recovery is requested it may
leak in spa_load_best function. Always free the generated config
when it is not assigned to the spa.
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4940
Just cleanup the new fs created during the test, so the "$found"
should be "true".
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4978
This is another bug in the long line of hole-birth related issues. In
this particular case, it was discovered that a previous hole-birth fix
(illumos bug 6513, commit bc77ba73) did not cover as many cases as we
thought it did. While the issue worked in the case of hole-punching
(writing zeroes to a large part of a file), it did not deal with
truncation, and then writing beyond the new end of the file.
The problem is that dbuf_findbp will return ENOENT if the block it's
trying to find is beyond the end of the file. If that happens, we assume
there is no birth time, and so we lose that information when we write
out new blkptrs. We should teach dbuf_findbp to look for things that are
beyond the current end, but not beyond the absolute end of the file.
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens mahrens@delphix.com
Reviewed by: George Wilson george.wilson@delphix.com
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7176
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/173/commits/8b9f3ad
Upstream-bugs: DLPX-46009
Porting notes:
- Fix ISO C90 mixed declaration error in dbuf.c ( int nlevels, epbs; ) ;
keep previous position of the initialization
From the man page of dirname: " Both dirname() and basename()
may modify the contents of path, so it may be desirable to pass
a copy when calling one of these functions." And in fact on linux
using dirname actually changes the contents of the passed parameter as
evident from the following failure when running the ctime test:
link(/root/zfs-mount, /root/zfs-mount/link_file)
Fix this by creating a copy of the input parameter and passing that
to dirname, thus not compromising the original parameter, allowing
the creation of hard link to succeed.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4977
Under a workload which makes heavy use of `dbuf_hold()`, I noticed that a
considerable amount of time was spent in `dbuf_hold_impl()`, due to its call to
`kmem_zalloc(sizeof (struct dbuf_hold_impl_data) * DBUF_HOLD_IMPL_MAX_DEPTH)`,
which is around 2KiB. This structure is used as a stack, to limit the size of
the C stack as dbuf_hold() calls itself recursively. We make a recursive call
to hold the parent's dbuf when the requested dbuf is not found. The vast
majority of the time, the parent or grandparent indirect dbuf is cached, so the
number of recursive calls is very low. However, we initialize this entire
array for every call to dbuf_hold().
To improve performance, this commit changes `dbuf_hold()` to use `kmem_alloc()`
instead of `kmem_zalloc()`. __dbuf_hold_impl_init is changed to initialize all
members of the struct before they are used. I observed ~5% performance
improvement on a workload which creates many files.
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4974
Erroneous access detected by gcc UndefinedBehaviorSanitizer:
`zdb.c:2424:7: runtime error: index 112 out of bounds for type 'uint64_t [112]'`
Fix: increase histogram size by 1 to accommodate all possible sizes.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4934
Issue #4883
- Benchmark memory block is increased to 128kiB to reflect real block sizes more
accurately. Measurements include all three stages needed for checksum generation,
i.e. `init()/compute()/fini()`. The inner loop is repeated multiple times to offset
overhead of time function.
- Fastest implementation selects native and byteswap methods independently in
benchmark. To support this new function pointers `init_byteswap()/fini_byteswap()`
are introduced.
- Implementation mutex lock is replaced by atomic variable.
- To save time, benchmark is not executed in userspace. Instead, highest supported
implementation is used for fastest. Default userspace selector is still 'cycle'.
- `fletcher_4_native/byteswap()` methods use incremental methods to finish
calculation if data size is not multiple of vector stride (currently 64B).
- Added `fletcher_4_native_varsize()` special purpose method for use when buffer size
is not known in advance. The method does not enforce 4B alignment on buffer size, and
will ignore last (size % 4) bytes of the data buffer.
- Benchmark `kstat` is changed to match the one of vdev_raidz. It now shows
throughput for all supported implementations (in B/s), native and byteswap,
as well as the code [fastest] is running.
Example of `fletcher_4_bench` running on `Intel(R) Xeon(R) CPU E5-2660 v3 @ 2.60GHz`:
implementation native byteswap
scalar 4768120823 3426105750
sse2 7947841777 4318964249
ssse3 7951922722 6112191941
avx2 13269714358 11043200912
fastest avx2 avx2
Example of `fletcher_4_bench` running on `Intel(R) Xeon Phi(TM) CPU 7210 @ 1.30GHz`:
implementation native byteswap
scalar 1291115967 1031555336
sse2 2539571138 1280970926
ssse3 2537778746 1080016762
avx2 4950749767 1078493449
avx512f 9581379998 4010029046
fastest avx512f avx512f
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4952
This patch adds compiler and runtime tests (user and kernel) for following
instruction sets: avx512f, avx512cd, avx512er, avx512pf, avx512bw, avx512dq,
avx512vl, avx512ifma, avx512vbmi.
note: Linux support for AVX-512F (Foundation) instruction set started with
linux v3.15
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4952
