Commit Graph

174 Commits

Author SHA1 Message Date
Andrea Gelmini
ca7af7f675 Fix various typos
Correct an assortment of typos throughout the code base.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #11774
2021-04-07 13:27:11 -07:00
Ryan Moeller
895d39aa83 Allow pool names that look like Solaris disk names
Nothing bad happens if a prefix of your pool name matches a disk name.
This is a bit of a silly restriction at this point.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #11781 
Closes #11813
2021-04-07 13:24:46 -07:00
Jake Howard
3242b5358e
Add "zstd-fast" to help options for "compression" property
This value does work as expected, and is documented in the manpage.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jake Howard <git@theorangeone.net>
Closes #11670
2021-03-03 08:14:19 -08:00
Martin Matuška
03ef8f09e1
Add missing checks for unsupported features
After 35ec517 it has become possible to import ZFS pools witn an
active org.illumos:edonr feature on FreeBSD, leading to a panic.

In addition, "zpool status" reported all pools without edonr
as upgradable and "zpool upgrade -v" reported edonr in the list
of upgradable features.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes #11653
2021-02-27 17:16:02 -08:00
Colm
658fb8020f
Add "compatibility" property for zpool feature sets
Property to allow sets of features to be specified; for compatibility
with specific versions / releases / external systems. Influences
the behavior of 'zpool upgrade' and 'zpool create'. Initial man
page changes and test cases included.

Brief synopsis:

zpool create -o compatibility=off|legacy|file[,file...] pool vdev...

compatibility = off : disable compatibility mode (enable all features)
compatibility = legacy : request that no features be enabled
compatibility = file[,file...] : read features from specified files.
Only features present in *all* files will be enabled on the
resulting pool. Filenames may be absolute, or relative to
/etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc
checked first).

Only affects zpool create, zpool upgrade and zpool status.

ABI changes in libzfs:

* New function "zpool_load_compat" to load and parse compat sets.
* Add "zpool_compat_status_t" typedef for compatibility parse status.
* Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum
* Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum

An initial set of base compatibility sets are included in
cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is
modified to install these in $pkgdatadir/compatibility.d and to
create symbolic links to a reasonable set of aliases.

Reviewed-by: ericloewe
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #11468
2021-02-17 21:30:45 -08:00
Brian Behlendorf
35ec51796f
FreeBSD: disable edonr in zfs_mod_supported_feature()
Rather than conditionally compiling out the edonr code for FreeBSD
update zfs_mod_supported_feature() to indicate this feature is
unsupported.  This ensures that all spa features are defined on
every platform, even if they are not supported.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11605 
Issue #11468
2021-02-17 08:14:51 -08:00
Brian Behlendorf
1c2358c12a
Linux 5.10 compat: use iov_iter in uio structure
As of the 5.10 kernel the generic splice compatibility code has been
removed.  All filesystems are now responsible for registering a
->splice_read and ->splice_write callback to support this operation.

The good news is the VFS provided generic_file_splice_read() and
iter_file_splice_write() callbacks can be used provided the ->iter_read
and ->iter_write callback support pipes.  However, this is currently
not the case and only iovecs and bvecs (not pipes) are ever attached
to the uio structure.

This commit changes that by allowing full iov_iter structures to be
attached to uios.  Ever since the 4.9 kernel the iov_iter structure
has supported iovecs, kvecs, bvevs, and pipes so it's desirable to
pass the entire thing when possible.  In conjunction with this the
uio helper functions (i.e uiomove(), uiocopy(), etc) have been
updated to understand the new UIO_ITER type.

Note that using the kernel provided uio_iter interfaces allowed the
existing Linux specific uio handling code to be simplified.  When
there's no longer a need to support kernel's older than 4.9, then
it will be possible to remove the iovec and bvec members from the
uio structure and always use a uio_iter.  Until then we need to
maintain all of the existing types for older kernels.

Some additional refactoring and cleanup was included in this change:

- Added checks to configure to detect available iov_iter interfaces.
  Some are available all the way back to the 3.10 kernel and are used
  when available.  In particular, uio_prefaultpages() now always uses
  iov_iter_fault_in_readable() which is available for all supported
  kernels.

- The unused UIO_USERISPACE type has been removed.  It is no longer
  needed now that the uio_seg enum is platform specific.

- Moved zfs_uio.c from the zcommon.ko module to the Linux specific
  platform code for the zfs.ko module.  This gets it out of libzfs
  where it was never needed and keeps this Linux specific code out
  of the common sources.

- Removed unnecessary O_APPEND handling from zfs_iter_write(), this
  is redundant and O_APPEND is already handled in zfs_write();

Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11351
2020-12-18 08:48:26 -08:00
Ryan Moeller
439dc034e9 FreeBSD: Implement sysctl for fletcher4 impl
There is a tunable to select the fletcher 4 checksum implementation on
Linux but it was not present in FreeBSD.

Implement the sysctl handler for FreeBSD and use ZFS_MODULE_PARAM_CALL
to provide the tunable on both platforms.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11270
2020-12-11 10:29:01 -08:00
Ryan Moeller
e0716250bf
FreeBSD: Do zcommon_init sooner to avoid FPU panic
There has been a panic affecting some system configurations where the
thread FPU context is disturbed during the fletcher 4 benchmarks,
leading to a panic at boot.

module_init() registers zcommon_init to run in the last subsystem
(SI_SUB_LAST).  Running it as soon as interrupts have been configured
(SI_SUB_INT_CONFIG_HOOKS) makes sure we have finished the benchmarks
before we start doing other things.

While it's not clear *how* the FPU context was being disturbed, this
does seem to avoid it.

Add a module_init_early() macro to run zcommon_init() at this earlier
point on FreeBSD.  On Linux this is defined as module_init().

Authored by: Konstantin Belousov <kib@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11302
2020-12-09 21:29:00 -08:00
Brian Behlendorf
83b698dc42
Reduce fletcher4 and raidz benchmark times
During module load time all of the available fetcher4 and raidz
implementations are benchmarked for a fixed amount of time to
determine the fastest available.  Manual testing has shown that this
time can be significantly reduced with negligible effect on the final
results.

This commit changes the benchmark time to 1ms which can reduce the
module load time by over a second on x86_64.  On an x86_64 system
with sse3, ssse3, and avx2 instructions the benchmark times are:

    Fletcher4    603ms   -> 15ms
    RAIDZ        1,322ms -> 64ms

Reviewed-by: Matthew Macy <mmacy@freebsd.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11282
2020-12-06 09:57:20 -08:00
Brian Behlendorf
0657326f9c
Update dRAID short feature description
The documentation describes dRAID as a distributed spare, not
parity, RAID implementation.  Update the short feature description
to match the rest of the documentation.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11229
2020-11-23 14:49:17 -08:00
Brian Behlendorf
b2255edcc0
Distributed Spare (dRAID) Feature
This patch adds a new top-level vdev type called dRAID, which stands
for Distributed parity RAID.  This pool configuration allows all dRAID
vdevs to participate when rebuilding to a distributed hot spare device.
This can substantially reduce the total time required to restore full
parity to pool with a failed device.

A dRAID pool can be created using the new top-level `draid` type.
Like `raidz`, the desired redundancy is specified after the type:
`draid[1,2,3]`.  No additional information is required to create the
pool and reasonable default values will be chosen based on the number
of child vdevs in the dRAID vdev.

    zpool create <pool> draid[1,2,3] <vdevs...>

Unlike raidz, additional optional dRAID configuration values can be
provided as part of the draid type as colon separated values. This
allows administrators to fully specify a layout for either performance
or capacity reasons.  The supported options include:

    zpool create <pool> \
        draid[<parity>][:<data>d][:<children>c][:<spares>s] \
        <vdevs...>

    - draid[parity]       - Parity level (default 1)
    - draid[:<data>d]     - Data devices per group (default 8)
    - draid[:<children>c] - Expected number of child vdevs
    - draid[:<spares>s]   - Distributed hot spares (default 0)

Abbreviated example `zpool status` output for a 68 disk dRAID pool
with two distributed spares using special allocation classes.

```
  pool: tank
 state: ONLINE
config:

    NAME                  STATE     READ WRITE CKSUM
    slag7                 ONLINE       0     0     0
      draid2:8d:68c:2s-0  ONLINE       0     0     0
        L0                ONLINE       0     0     0
        L1                ONLINE       0     0     0
        ...
        U25               ONLINE       0     0     0
        U26               ONLINE       0     0     0
        spare-53          ONLINE       0     0     0
          U27             ONLINE       0     0     0
          draid2-0-0      ONLINE       0     0     0
        U28               ONLINE       0     0     0
        U29               ONLINE       0     0     0
        ...
        U42               ONLINE       0     0     0
        U43               ONLINE       0     0     0
    special
      mirror-1            ONLINE       0     0     0
        L5                ONLINE       0     0     0
        U5                ONLINE       0     0     0
      mirror-2            ONLINE       0     0     0
        L6                ONLINE       0     0     0
        U6                ONLINE       0     0     0
    spares
      draid2-0-0          INUSE     currently in use
      draid2-0-1          AVAIL
```

When adding test coverage for the new dRAID vdev type the following
options were added to the ztest command.  These options are leverages
by zloop.sh to test a wide range of dRAID configurations.

    -K draid|raidz|random - kind of RAID to test
    -D <value>            - dRAID data drives per group
    -S <value>            - dRAID distributed hot spares
    -R <value>            - RAID parity (raidz or dRAID)

The zpool_create, zpool_import, redundancy, replacement and fault
test groups have all been updated provide test coverage for the
dRAID feature.

Co-authored-by: Isaac Huang <he.huang@intel.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Co-authored-by: Don Brady <don.brady@delphix.com>
Co-authored-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mmaybee@cray.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10102
2020-11-13 13:51:51 -08:00
Ryan Moeller
76d04993a6
Update references to nonexistent man pages in code
Refer to the correct section or alternative for FreeBSD and Linux.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #11132
2020-10-30 08:55:59 -07:00
Ryan Moeller
485b50bb9e
Cross-platform acltype
The acltype property is currently hidden on FreeBSD and does not
reflect the NFSv4 style ZFS ACLs used on the platform.  This makes it
difficult to observe that a pool imported from FreeBSD on Linux has a
different type of ACL that is being ignored, and vice versa.

Add an nfsv4 acltype and expose the property on FreeBSD.

Make the default acltype nfsv4 on FreeBSD.

Setting acltype to an unhanded style is treated the same as setting
it to off.  The ACLs will not be removed, but they will be ignored.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10520
2020-10-13 21:25:48 -07:00
Ryan Moeller
7ead2be3d2
Rename acltype=posixacl to acltype=posix
Prefer acltype=off|posix, retaining the old names as aliases.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10918
2020-09-16 12:26:06 -07:00
Matthew Macy
2dbad44710
FreeBSD: disable neon usage
The neon support code does not build on FreeBSD,
ifdef out references to fix linker issues on arm64.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10809
2020-08-26 09:54:37 -07:00
Clint Armstrong
1ddd7cdb92
Make formatting of dedup values string consistent
All other prop values return options separated by ` | `,
dedup values do not, they are separated by `, `. This change
makes the dedup value formatting consistent with other properties.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Clint Armstrong <clint@clintarmstrong.net>
Closes #10761
2020-08-22 10:58:07 -07:00
Michael Niewöhner
10b3c7f5e4 Add zstd support to zfs
This PR adds two new compression types, based on ZStandard:

- zstd: A basic ZStandard compression algorithm Available compression.
  Levels for zstd are zstd-1 through zstd-19, where the compression
  increases with every level, but speed decreases.

- zstd-fast: A faster version of the ZStandard compression algorithm
  zstd-fast is basically a "negative" level of zstd. The compression
  decreases with every level, but speed increases.

  Available compression levels for zstd-fast:
   - zstd-fast-1 through zstd-fast-10
   - zstd-fast-20 through zstd-fast-100 (in increments of 10)
   - zstd-fast-500 and zstd-fast-1000

For more information check the man page.

Implementation details:

Rather than treat each level of zstd as a different algorithm (as was
done historically with gzip), the block pointer `enum zio_compress`
value is simply zstd for all levels, including zstd-fast, since they all
use the same decompression function.

The compress= property (a 64bit unsigned integer) uses the lower 7 bits
to store the compression algorithm (matching the number of bits used in
a block pointer, as the 8th bit was borrowed for embedded block
pointers).  The upper bits are used to store the compression level.

It is necessary to be able to determine what compression level was used
when later reading a block back, so the concept used in LZ4, where the
first 32bits of the on-disk value are the size of the compressed data
(since the allocation is rounded up to the nearest ashift), was
extended, and we store the version of ZSTD and the level as well as the
compressed size. This value is returned when decompressing a block, so
that if the block needs to be recompressed (L2ARC, nop-write, etc), that
the same parameters will be used to result in the matching checksum.

All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`,
`zio_prop_t`, etc.) uses the separated _compress and _complevel
variables.  Only the properties ZAP contains the combined/bit-shifted
value. The combined value is split when the compression_changed_cb()
callback is called, and sets both objset members (os_compress and
os_complevel).

The userspace tools all use the combined/bit-shifted value.

Additional notes:

zdb can now also decode the ZSTD compression header (flag -Z) and
inspect the size, version and compression level saved in that header.
For each record, if it is ZSTD compressed, the parameters of the decoded
compression header get printed.

ZSTD is included with all current tests and new tests are added
as-needed.

Per-dataset feature flags now get activated when the property is set.
If a compression algorithm requires a feature flag, zfs activates the
feature when the property is set, rather than waiting for the first
block to be born.  This is currently only used by zstd but can be
extended as needed.

Portions-Sponsored-By: The FreeBSD Foundation
Co-authored-by: Allan Jude <allanjude@freebsd.org>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #6247
Closes #9024
Closes #10277
Closes #10278
2020-08-20 10:30:06 -07:00
Matthew Macy
5e7eaf8fbd
Add define to enable autotrim to default to on
In FreeBSD trim has defaulted to on for several
years. In order to minimize POLA violations on
import it's important to maintain this default
when importing vendored openzfs in to FreeBSD
base.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10719
2020-08-18 09:52:30 -07:00
Matthew Macy
e64cc4954c
Refactor ccompile.h to not include system headers
This is a step toward being able to vendor the OpenZFS code in FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #10625
2020-07-25 20:09:50 -07:00
Brian Behlendorf
9a49d3f3d3
Add device rebuild feature
The device_rebuild feature enables sequential reconstruction when
resilvering.  Mirror vdevs can be rebuilt in LBA order which may
more quickly restore redundancy depending on the pools average block
size, overall fragmentation and the performance characteristics
of the devices.  However, block checksums cannot be verified
as part of the rebuild thus a scrub is automatically started after
the sequential resilver completes.

The new '-s' option has been added to the `zpool attach` and
`zpool replace` command to request sequential reconstruction
instead of healing reconstruction when resilvering.

    zpool attach -s <pool> <existing vdev> <new vdev>
    zpool replace -s <pool> <old vdev> <new vdev>

The `zpool status` output has been updated to report the progress
of sequential resilvering in the same way as healing resilvering.
The one notable difference is that multiple sequential resilvers
may be in progress as long as they're operating on different
top-level vdevs.

The `zpool wait -t resilver` command was extended to wait on
sequential resilvers.  From this perspective they are no different
than healing resilvers.

Sequential resilvers cannot be supported for RAIDZ, but are
compatible with the dRAID feature being developed.

As part of this change the resilver_restart_* tests were moved
in to the functional/replacement directory.  Additionally, the
replacement tests were renamed and extended to verify both
resilvering and rebuilding.

Original-patch-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: John Poduska <jpoduska@datto.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10349
2020-07-03 11:05:50 -07:00
Arvind Sankar
60356b1a21 Add include files for prototypes
Include the header with prototypes in the file that provides definitions
as well, to catch any mismatch between prototype and definition.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10470
2020-06-18 12:21:25 -07:00
Arvind Sankar
71504277ae Cleanup linux module kbuild files
The linux module can be built either as an external module, or compiled
into the kernel, using copy-builtin. The source and build directories
are slightly different between the two cases, and currently, compiling
into the kernel still refers to some files from the configured ZFS
source tree, instead of the copies inside the kernel source tree. There
is also duplication between copy-builtin, which creates a Kbuild file to
build ZFS inside the kernel tree, and the top-level module/Makefile.in.

Fix this by moving the list of modules and the CFLAGS settings into a
new module/Kbuild.in, which will be used by the kernel kbuild
infrastructure, and using KBUILD_EXTMOD to distinguish the two cases
within the Makefiles, in order to choose appropriate include
directories etc.

Module CFLAGS setting is simplified by using subdir-ccflags-y (available
since 2.6.30) to set them in the top-level Kbuild instead of each
individual module. The disabling of -Wunused-but-set-variable is removed
from the lua and zfs modules. The variable that the Makefile uses is
actually not defined, so this has no effect; and the warning has long
been disabled by the kernel Makefile itself.

The target_cpu definition in module/{zfs,zcommon} is removed as it was
replaced by use of CONFIG_SPARC64 in
  commit 70835c5b75 ("Unify target_cpu handling")

os/linux/{spl,zfs} are removed from obj-m, as they are not modules in
themselves, but are included by the Makefile in the spl and zfs module
directories. The vestigial Makefiles in os and os/linux are removed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10379
Closes #10421
2020-06-10 09:24:15 -07:00
Paul B. Henson
7bf3e1fa0f OpenZFS 3254 - add support in zfs for aclmode=restricted
Authored-by: Paul B. Henson <henson@acm.org>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/3254
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/71dbfc287c
Closes #10266
2020-04-30 11:23:59 -07:00
Paul B. Henson
a1af567bb6 OpenZFS 742 - Resurrect the ZFS "aclmode" property OpenZFS 664 - Umask masking "deny" ACL entries OpenZFS 279 - Bug in the new ACL (post-PSARC/2010/029) semantics
Porting notes:
* Updated zfs_acl_chmod to take 'boolean_t isdir' as first parameter
  rather than 'zfsvfs_t *zfsvfs'
* zfs man pages changes mixed between zfs and new zfsprops man pages

Reviewed by: Aram Hvrneanu <aram@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Robert Gordon <rbg@openrbg.com>
Reviewed by: Mark.Maybee@oracle.com
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@nexenta.com>
Ported-by: Paul B. Henson <henson@acm.org>

OpenZFS-issue: https://www.illumos.org/issues/742
OpenZFS-issue: https://www.illumos.org/issues/664
OpenZFS-issue: https://www.illumos.org/issues/279
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a3c49ce110
Closes #10266
2020-04-30 11:22:45 -07:00
Fabio Scaccabarozzi
c9e3efdb3a
Bugfix/fix uio partial copies
In zfs_write(), the loop continues to the next iteration without
accounting for partial copies occurring in uiomove_iov when 
copy_from_user/__copy_from_user_inatomic return a non-zero status.
This results in "zfs: accessing past end of object..." in the 
kernel log, and the write failing.

Account for partial copies and update uio struct before returning
EFAULT, leave a comment explaining the reason why this is done.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: ilbsmart <wgqimut@gmail.com>
Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com>
Closes #8673 
Closes #10148
2020-04-01 09:48:54 -07:00
Matthew Ahrens
3f38797338
Compile cityhash code into libzfs
Make the cityhash code compile into libzfs, in preparation for the new
"zstream" command.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #10152
2020-03-27 09:11:22 -07:00
Ryan Moeller
f5f6fb03b7
Change default to overlay=on
Filesystems allow overlay mounts by default on FreeBSD and Linux.

Respect the native convention by switching the default to overlay=on,
while retaining the option to turn the property off for compatibility
with other operating systems' conventions.

Update documentation and tests accordingly.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10030
2020-03-06 09:28:19 -08:00
Richard Laager
f244846462
Prefer org.openzfs for features and properties
Moving forward, we wish to use org.openzfs (no dash) rather than
org.open-zfs or org.zfsonlinux for feature GUIDs and property names.
The existing feature GUIDs cannot be changed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #10003
2020-02-18 09:36:50 -08:00
Christian Schwarz
a73f361fdb Implement bookmark copying
This feature allows copying existing bookmarks using

    zfs bookmark fs#target fs#newbookmark

There are some niche use cases for such functionality,
e.g. when using bookmarks as markers for replication progress.

Copying redaction bookmarks produces a normal bookmark that
cannot be used for redacted send (we are not duplicating
the redaction object).

ZCP support for bookmarking (both creation and copying) will be
implemented in a separate patch based on this work.

Overview:

- Terminology:
    - source = existing snapshot or bookmark
    - new/bmark = new bookmark
- Implement bookmark copying in `dsl_bookmark.c`
  - create new bookmark node
  - copy source's `zbn_phys` to new's `zbn_phys`
  - zero-out redaction object id in copy
- Extend existing bookmark ioctl nvlist schema to accept
  bookmarks as sources
  - => `dsl_bookmark_create_nvl_validate` is authoritative
- use `dsl_dataset_is_before` check for both snapshot
  and bookmark sources
- Adjust CLI
  - refactor shortname expansion logic in `zfs_do_bookmark`
- Update man pages
  - warn about redaction bookmark handling
- Add test cases
  - CLI
  - pyyzfs libzfs_core bindings

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9571
2020-02-11 13:19:12 -08:00
Ryan Moeller
8c4987c489
Restore aclmode and remove acltype on FreeBSD
This replaces the placeholder ZFS_PROP_PRIVATE with ZFS_PROP_ACLMODE,
matching what is done in the NFSv4 ACLs PR (#9709).

On FreeBSD we hide ZFS_PROP_ACLTYPE, while on Linux we hide
ZFS_PROP_ACLMODE.

The tests already assume this arrangement.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #9913
2020-02-04 08:40:07 -08:00
Ryan Moeller
fe7c15985b
Left-align index props
Index type props display as strings, which should be aligned to the
left not to the right.

Before:
```
FreeBSD-13_0-CURRENT-r356528 ➜  ~ zfs list -ro name,aclmode,mountpoint
NAME        ACLMODE  MOUNTPOINT
p0      passthrough  /p0
p0/foo      discard  /p0/foo
```

After:
```
FreeBSD-13_0-CURRENT-r356528 ➜  ~ zfs list -ro name,aclmode,mountpoint
NAME    ACLMODE      MOUNTPOINT
p0      passthrough  /p0
p0/foo  discard      /p0/foo
```

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #9912
2020-01-31 08:55:51 -08:00
Christian Schwarz
3aea3c9d54 entity_namecheck: doc comment: include space as allowed character
The helper function valid_char already allows it but
the doc comment was out of date.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9879
2020-01-23 21:11:54 -08:00
Brian Behlendorf
70835c5b75
Unify target_cpu handling
Over the years several slightly different approaches were used
in the Makefiles to determine the target architecture.  This
change updates both the build system and Makefile to handle
this in a consistent fashion.

TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64
and made available in the Makefiles to be used as appropriate.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9848
2020-01-17 12:40:09 -08:00
loli10K
c24fa4b19a Fix "zpool add -n" for dedup, special and log devices
For dedup, special and log devices "zpool add -n" does not print
correctly their vdev type:

~# zpool add -n pool dedup /tmp/dedup special /tmp/special log /tmp/log
would update 'pool' to the following configuration:
	pool
	  /tmp/normal
	  /tmp/dedup
	  /tmp/special
	  /tmp/log

This could lead storage administrators to modify their ZFS pools to
unexpected and unintended vdev configurations.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #9783 
Closes #9390
2020-01-06 15:40:06 -08:00
Matthew Macy
4bc721965f Add FreeBSD jail support hooks
Add the 'zfs jail/unjail' subcommands along with the relevant 
documentation from FreeBSD.  This feature is not supported on
Linux and still requires the match kernel ioctls which will
be included when the FreeBSD platform code is integrated.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9686
2019-12-11 11:58:37 -08:00
Matthew Macy
0dcef9b966 Disable sysfs feature checks on FreeBSD
The sysfs infrastructure for reporting supported features and
properties is Linux specific.  Disable it on FreeBSD until it can
be extended to be more portable.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9684
2019-12-06 09:44:29 -08:00
Matthew Macy
f95704ca5e Disable EDONR on FreeBSD
FreeBSD uses its own crypto framework in-kernel which, at this time,
has no EDONR implementation.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9664
2019-12-05 13:10:29 -08:00
Brian Behlendorf
624222ae31
Increase allowed 'special_small_blocks' maximum value
There may be circumstances where it's desirable that all blocks
in a specified dataset be stored on the special device.  Relax
the artificial 128K limit and allow the special_small_blocks
property to be set up to 1M.  When blocks >1MB have been enabled
via the zfs_max_recordsize module option, this limit is increased
accordingly.

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9131
Closes #9355
2019-12-03 09:58:03 -08:00
Matthew Macy
b3673342c7 Wrap module_param_call() routines under __linux__
The module_param_call() functionality is currently still
Linux-specific and should be wrapped accordingly.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9666
2019-12-03 09:56:15 -08:00
Matthew Macy
74d1d74959 Move linux qsort def to platform header
Moving qsort to the platform header allows each platform to
provide an appropriate sorting implementation.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9663
2019-12-03 09:49:40 -08:00
Matthew Macy
4a2ed90013 Wrap Linux module macros
MODULE_VERSION is already defined on FreeBSD. Wrap all of the
used MODULE_* macros for the sake of consistency and portability.

Add a user space noop version to reduce the need for _KERNEL ifdefs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9542
2019-11-01 10:41:03 -07:00
Romain Dolbeau
0b2a642351 Add AVX512BW variant of fletcher
It is much faster than AVX512F when byteswapping on Skylake-SP
and newer, as we can do the byteswap in a single vshufb instead
of many instructions.

Reviewed by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes #9517
2019-10-30 12:26:14 -07:00
Brian Behlendorf
10fa254539
Linux 4.14, 4.19, 5.0+ compat: SIMD save/restore
Contrary to initial testing we cannot rely on these kernels to
invalidate the per-cpu FPU state and restore the FPU registers.
Nor can we guarantee that the kernel won't modify the FPU state
which we saved in the task struck.

Therefore, the kfpu_begin() and kfpu_end() functions have been
updated to save and restore the FPU state using our own dedicated
per-cpu FPU state variables.

This has the additional advantage of allowing us to use the FPU
again in user threads.  So we remove the code which was added to
use task queues to ensure some functions ran in kernel threads.

Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #9346
Closes #9403
2019-10-24 10:17:33 -07:00
Matthew Macy
bce795ad7a Remove linux/mod_compat.h from common code
It is no longer necessary; mod_compat.h is included from zfs_context.h.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9449
2019-10-11 10:10:20 -07:00
loli10K
715c996d3b Fix pool creation with feature@allocation_classes disabled
When "feature@allocation_classes" is not enabled on the pool no vdev
with "special" or "dedup" allocation type should be allowed to exist in
the vdev tree.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #9427 
Closes #9429
2019-10-10 16:39:41 -07:00
Matthew Macy
03fdcb9adc Make module tunables cross platform
Adds ZFS_MODULE_PARAM to abstract module parameter
setting to operating systems other than Linux.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9230
2019-09-05 14:49:49 -07:00
Matthew Macy
006e9a4088 OpenZFS restructuring - move platform specific headers
Move platform specific Linux headers under include/os/linux/.
Update the build system accordingly to detect the platform.
This lays some of the initial groundwork to supporting building
for other platforms.

As part of this change it was necessary to create both a user
and kernel space sys/simd.h header which can be included in
either context.  No functional change, the source has been
refactored and the relevant #include's updated.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Matthew Macy <mmacy@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9198
2019-09-05 09:34:54 -07:00
Andrea Gelmini
9f5c1bc609 Fix typos in module/
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #9241
2019-08-30 14:32:18 -07:00
Sara Hartse
37f03da8ba Fast Clone Deletion
Deleting a clone requires finding blocks are clone-only, not shared
with the snapshot. This was done by traversing the entire block tree
which results in a large performance penalty for sparsely
written clones.

This is new method keeps track of clone blocks when they are
modified in a "Livelist" so that, when it’s time to delete,
the clone-specific blocks are already at hand.

We see performance improvements because now deletion work is
proportional to the number of clone-modified blocks, not the size
of the original dataset.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Closes #8416
2019-07-26 10:54:14 -07:00