zvol_geom_bio_strategy should handle its own use of the zvol
suspend reader lock and ensure the zilog exists when needed.
A few other places using the zvol zilog should use the suspend
reader lock as well.
Simplify consumers of zvol_geom_bio_strategy, fix the locking, and
while in here, use the boolean_t constants with doread.
Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10381
FreeBSD needs arc_adjust_zthr to run periodically for kstats to be
updated. A comment in the code suggests this may have been the
original intent in illumos as well:
c946d5a913/module/zfs/arc.c (L4697-L4700)
Create the thread with a 1 second timer.
Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10371
The macOS kmem implementation uses avl_update() and related
functions. These same function exist in the Solaris AVL code but
were removed because they were unused. Restore them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#10390
Update API usage to reflect recent change.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10384
The dsl_destroy_snapshots_nvl() function has an early error out,
and temporary nvlists were not freed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#10366
Adding the gang ABD type, which allows for linear and scatter ABDs to
be chained together into a single ABD.
This can be used to avoid doing memory copies to/from ABDs. An example
of this can be found in vdev_queue.c in the vdev_queue_aggregate()
function.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Brian <bwa@clemson.edu>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#10069
Due to hotplug support or BIOS bugs sometimes max_ncpus can be
an absurdly high value. I have a system with 32 cores/threads
but reports max_ncpus == 440. This many threads potentially
cripples the system during arc_prune floods for example.
boot_ncpus is the number of working CPUs when called so use
that instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#10282
This is arguably a change for internal consistency within OpenZFS, as the
Linux implementation will reject read(2) on directories with EISDIR. It's
not unreasonable for read(2) to do something here on FreeBSD, but we don't
currently copy out anything useful anyways so start rejecting it with the
appropriate error.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes#10338
We only use ZVOL_DIR on FreeBSD, and on FreeBSD it isn't correct.
Move the definition to the file where it is needed, and define it as
/dev/zvol/.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10337
If `receive_writer_thread()` gets an error from `receive_process_record()`,
it should be saved in `rwa->err` so that we will stop processing records,
and the main thread will notice that the receive has failed.
When an error is first encountered, this happens correctly. However, if
there are more records to dequeue, the next time through the loop we
will reset `rwa->err` to zero, allowing us to try to process the
following record (2 after the failed record). Depending on what types
of records remain, we may incorrectly complete the receive
"successfully", but without actually having processed all the records.
The fix is to only set `rwa->err` if we got a *non-zero* error.
This bug was introduced by #10099 "Improve zfs receive performance by
batching writes".
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10320
The VN_OPEN_INVFS literal is in the wrong field.
Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: yparitcher <y@paritcher.com>
Closes#10322
Commit fc551d7 introduced the wrappers abd_enter_critical() and
abd_exit_critical() to mark critical sections. On Linux these are
implemented with the local_irq_save() and local_irq_restore() macros
which set the 'flags' argument when saving. By wrapping them with
a function the local variable is no longer set by the macro and is
no longer properly restored.
Convert abd_enter_critical() and abd_exit_critical() to macros to
resolve this issue and ensure the flags are properly restored.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10332
The member drc_err of dmu_recv_cookie_t is used only locally in
receive_read, so we can replace it with a local variable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10319
When a resilver finishes, vdev_dtl_reassess is called to hopefully
excise DTL_MISSING (amongst other things). If there are errors during
the resilver, they are tracked in DTL_SCRUB, as spelled out in the
block comment in vdev.c. DTL_SCRUB is in-core only, so it can only
be used if the pool was online for the whole resilver. This state is
tracked with the spa_scrub_started flag, which only gets set when
the scan is initialized. Unfortunately, this flag gets cleared right
before vdev_dtl_reassess gets called, so if there are any errors
during the scan, DTL_MISSING will never get excised and the resilver
will just continually restart. This fix simply moves clearing that
flag until after the call to vdev_dtl_reasses.
In addition, if a pool is imported and already has scn_errors > 0,
this change will restart the resilver immediately instead of doing
the rest of the scan and then restarting it from the beginning. On
the other hand, if scn_errors == 0 at import, then no errors have
been encountered so far, so the spa_scrub_started flag can be safely
set.
A test has been added to verify that resilver does not restart when
relevant DTL's are available.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: John Poduska <jpoduska@datto.com>
Closes#10291
Reorganizing ABD code base so OS-independent ABD code has been placed
into a common abd.c file. OS-dependent ABD code has been left in each
OS's ABD source files, and these source files have been renamed to
abd_os.
The OS-independent ABD code is now under:
module/zfs/abd.c
With the OS-dependent code in:
module/os/linux/zfs/abd_os.c
module/os/freebsd/zfs/abd_os.c
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#10293
Functional changes:
We implement refcounts of log blocks and their aligned size on the
cache device along with two corresponding arcstats. The refcounts are
reflected in the header of the device and provide valuable information
as to whether log blocks are accounted for correctly. These are
dynamically adjusted as log blocks are committed/evicted. zdb also uses
this information in the device header and compares it to the
corresponding values as reported by dump_l2arc_log_blocks() which
emulates l2arc_rebuild(). If the refcounts saved in the device header
report higher values, zdb exits with an error. For this feature to work
correctly there should be no active writes on the device. This is also
employed in the tests of persistent L2ARC. We extend the structure of
the cache device header by adding the two new variables mirroring the
refcounts after the existing variables to preserve backward
compatibility in terms of persistent L2ARC.
1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which
reflect the total aligned size of log blocks on the device. This is
also reflected in the header of the cache device as "dh_lb_asize".
2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count"
which reflect the total number of L2ARC log blocks present on cache
devices. It is also reflected in the header of the cache device as
"dh_lb_count".
In l2arc_rebuild_vdev() if the amount of committed log entries in a log
block is 0 and the device header is valid we update the device header.
This will facilitate trimming of the whole device in this case when
TRIM for L2ARC is implemented.
Improve loop protection in l2arc_rebuild() by using the starting offset
of the payload of each log block instead of the starting offset of the
log block.
If the zio in l2arc_write_buffers() fails, restore the lbps array in the
header of the device to its previous state in l2arc_write_done().
If l2arc_rebuild() ends the rebuild process without restoring any L2ARC
log blocks in ARC and without any other error, this means that the lbps
array in the header is pointing to non-existent or invalid log blocks.
Reset the device header in this case.
In l2arc_rebuild() change the zfs_dbgmsg messages to
spa_history_log_internal() making them user visible with zpool history
command.
Non-functional changes:
Make the first test in persistent L2ARC use `zdb -lll` to increase
coverage in `zdb.c`.
Rename psize with asize when referring to log blocks, since
L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also
rename dh_log_blk_entries to dh_log_entries to make it clear that
it is a mirror of l2ad_log_entries. Added comments for both changes.
Fix inaccurate comments for example in l2arc_log_blk_restore().
Add asserts at the end in l2arc_evict() and l2arc_write_buffers().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#10228
Modern bootloaders leverage data stored in the root filesystem to
enable some of their powerful features. GRUB specifically has a grubenv
file which can store large amounts of configuration data that can be
read and written at boot time and during normal operation. This allows
sysadmins to configure useful features like automated failover after
failed boot attempts. Unfortunately, due to the Copy-on-Write nature
of ZFS, the standard behavior of these tools cannot handle writing to
ZFS files safely at boot time. We need an alternative way to store
data that allows the bootloader to make changes to the data.
This work is very similar to work that was done on Illumos to enable
similar functionality in the FreeBSD bootloader. This patch is different
in that the data being stored is a raw grubenv file; this file can store
arbitrary variables and values, and the scripting provided by grub is
powerful enough that special structures are not required to implement
advanced behavior.
We repurpose the second padding area in each label to store the grubenv
file, protected by an embedded checksum. We add two ioctls to get and
set this data, and libzfs_core and libzfs functions to access them more
easily. There are no direct command line interfaces to these functions;
these will be added directly to the bootloader utilities.
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#10009
When a top-level vdev is removed from a pool it is converted to an
indirect vdev. Until now splitting such mirrored pools was not possible
with zpool split. This patch enables handling of indirect vdevs and
splitting of those pools with zpool split.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#10283
Sync up with the following changes from FreeBSD:
ZFS: add emulation of atomic_swap_64 and atomic_load_64
Some 32-bit platforms do not provide 64-bit atomic operations that ZFS
requires, either in userland or at all. We emulate those operations
for those platforms using a mutex. That is not entirely correct and
it's very efficient. Besides, the loads are plain loads, so torn
values are possible.
Nevertheless, the emulation seems to work for some definition of work.
This change adds atomic_swap_64, which is already used in ZFS code,
and atomic_load_64 that can be used to prevent torn reads.
Authored by: avg <avg@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@3458e5d1e6
cleanup of illumos compatibility atomics
atomic_cas_32 is implemented using atomic_fcmpset_32 on all platforms.
Ditto for atomic_cas_64 and atomic_fcmpset_64 on platforms that have
it. The only exception is sparc64 that provides MD atomic_cas_32 and
atomic_cas_64.
This is slightly inefficient as fcmpset reports whether the operation
updated the target and that information is not needed for cas.
Nevertheless, there is less code to maintain and to add for new
platforms. Also, the operations are done inline now as opposed to
function calls before.
atomic_add_64_nv is implemented using atomic_fetchadd_64 on platforms
that provide it.
casptr, cas32, atomic_or_8, atomic_or_8_nv are completely removed as
they have no users.
atomic_mtx that is used to emulate 64-bit atomics on platforms that
lack them is defined only on those platforms.
As a result, platform specific opensolaris_atomic.S files have lost
most of their code. The only exception is i386 where the
compat+contrib code provides 64-bit atomics for userland use. That
code assumes availability of cmpxchg8b instruction. FreeBSD does not
have that assumption for i386 userland and does not provide 64-bit
atomics. Hopefully, this can and will be fixed.
Authored by: avg <avg@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@e9642c209b
emulate illumos membar_producer with atomic_thread_fence_rel
membar_producer is supposed to be a store-store barrier.
Also, in the code that FreeBSD has ported from illumos membar_producer
is used only with regular stores to regular memory (with respect to
caching).
We do not have an MI primitive for the store-store barrier, so
atomic_thread_fence_rel is the closest we have as it provides
(load | store) -> store barrier.
Previously, membar_producer was an empty function call on all 32-bit
arm-s, 32-bit powerpc, riscv and all mips variants. I think that it
was inadequate.
On other platforms, such as amd64, arm64, i386, powerpc64, sparc64,
membar_producer was implemented using stronger primitives than required
for a store-store barrier with respect to regular memory access.
For example, it used sfence on amd64 and lock-ed nop in i386 (despite
TSO).
On powerpc64 we now use recommended lwsync instead of eieio.
On sparc64 FreeBSD uses TSO mode.
On arm64/aarch64 we now use dmb sy instead of dmb ish. Not sure if
this is an improvement, actually.
After this change we can drop opensolaris_atomic.S for aarch64, amd64,
powerpc64 and sparc64 as all required atomic operations have either
direct or light-weight mapping to FreeBSD native atomic operations.
Discussed with: kib
Authored by: avg <avg@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@50cdda62fc
fix up r353340, don't assume that fcmpset has strong semantics
fcmpset can have two kinds of semantics, weak and strong.
For practical purposes, strong semantics means that if fcmpset fails
then the reported current value is always different from the expected
value. Weak semantics means that the reported current value may be the
same as the expected value even though fcmpset failed. That's a so
called "sporadic" failure.
I originally implemented atomic_cas expecting strong semantics, but
many platforms actually have weak one.
Reported by: pkubaj (not confirmed if same issue)
Discussed with: kib, mjg
Authored by: avg <avg@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@238787c74e
[PowerPC] [MIPS] Implement 32-bit kernel emulation of atomic64 operations
This is a lock-based emulation of 64-bit atomics for kernel use, split off
from an earlier patch by jhibbits.
This is needed to unblock future improvements that reduce the need for
locking on 64-bit platforms by using atomic updates.
The implementation allows for future integration with userland atomic64,
but as that implies going through sysarch for every use, the current
status quo of userland doing its own locking may be for the best.
Submitted by: jhibbits (original patch), kevans (mips bits)
Reviewed by: jhibbits, jeff, kevans
Authored by: bdragon <bdragon@FreeBSD.org>
Differential Revision: https://reviews.freebsd.org/D22976
FreeBSD-commit: freebsd/freebsd@db39dab3a8
Remove sparc64 kernel support
Remove all sparc64 specific files
Remove all sparc64 ifdefs
Removee indireeect sparc64 ifdefs
Authored by: imp <imp@FreeBSD.org>
FreeBSD-commit: freebsd/freebsd@48b94864c5
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Ported-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10250
reflect delete permissions for ACLs
Authored by: Kevin Crowe <kevin.crowe@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>
Porting Notes:
* Only comments are updated
OpenZFS-issue: https://www.illumos.org/issues/6765
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/da412744bcCloses#10266
- and some additional considerations
Authored by: Kevin Crowe <kevin.crowe@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>
OpenZFS-issue: https://www.illumos.org/issues/6762
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1eb4e906ecCloses#10266
with aclmode=passthrough
Authored by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>
OpenZFS-issue: https://www.illumos.org/issues/6764
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/de0f1ddb59Closes#10266
Authored-by: Paul B. Henson <henson@acm.org>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Paul B. Henson <henson@acm.org>
OpenZFS-issue: https://www.illumos.org/issues/3254
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/71dbfc287cCloses#10266
Porting notes:
* Updated zfs_acl_chmod to take 'boolean_t isdir' as first parameter
rather than 'zfsvfs_t *zfsvfs'
* zfs man pages changes mixed between zfs and new zfsprops man pages
Reviewed by: Aram Hvrneanu <aram@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Robert Gordon <rbg@openrbg.com>
Reviewed by: Mark.Maybee@oracle.com
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@nexenta.com>
Ported-by: Paul B. Henson <henson@acm.org>
OpenZFS-issue: https://www.illumos.org/issues/742
OpenZFS-issue: https://www.illumos.org/issues/664
OpenZFS-issue: https://www.illumos.org/issues/279
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a3c49ce110Closes#10266
When a Thumb-2 kernel is being used, then longjmp must be implemented
using the Thumb-2 instruction set in module/lua/setjmp/setjmp_arm.S.
Original-patch-by: @jsrlabs
Reviewed-by: @awehrfritz
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7408Closes#9957Closes#9967
zlib_inflateEnd was accidentally a wrapper for inflateInit instead of
inflateEnd, and hilarity ensues.
Fix the typo so we free memory instead of allocating more.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10225Closes#10252
This patch corrects a bug introduced in 61152d1069. When
resuming a raw base receive, the dmu_recv code always sets
drc->drc_fromsnapobj to the object ID of the previous
snapshot. For incrementals, this is correct, but for base
sends, this should be left at 0. The presence of this ID
eventually allows a check to run which determines whether
or not the incoming stream and the previous snapshot have
matching IVset guids. This check fails becuase it is not
meant to run when there is no previous snapshot. When it
does fail, the user receives an error stating that the
incoming stream has the problem outlined in errata 4.
This patch corrects this issue by simply ensuring
drc->drc_fromsnapobj is left as 0 for base receives.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#10234Closes#10239
Deduplicated send streams (i.e. `zfs send -D` and `zfs receive` of such
streams) are deprecated. Deduplicated send streams can be received by
first converting them to non-deduplicated with the `zstream redup`
command.
This commit removes the code for sending and receiving deduplicated send
streams. `zfs send -D` will now print a warning, ignore the `-D` flag,
and generate a regular (non-deduplicated) send stream. `zfs receive` of
a deduplicated send stream will print an error message and fail.
The resulting code simplification (especially in the kernel's support
for receiving dedup streams) should help enable future performance
enhancements.
Several new tests are added which leverage `zstream redup`.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Issue #7887
Issue #10117
Issue #10156Closes#10212
Each metaslab group (of which there is one per top-level vdev) has
several (4, by default) "metaslab group allocators". Each "allocator"
has its own metaslab that it prefers to allocate from (the "primary"
allocator), and each can perform allocations concurrently with the other
allocators. In addition to the primary metaslab, there are several
other fields that need to be tracked separately for each allocator.
These are currently stored as several arrays in the metaslab_group_t,
each array indexed by allocator number.
This change organizes all the metaslab-group-allocator-specific fields
into a new struct, metaslab_group_allocator_t. The metaslab_group_t now
needs only one array indexed by the allocator number - which contains
the metaslab_group_allocator_t's.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10213
The progress of a send is supposed to be reported by `zfs send -v`, but
it is not. This works by creating a new user thread (with
pthread_create()) which does ZFS_IOC_SEND_PROGRESS ioctls to check how
much progress has been made. This IOCTL finds the specified send (since
there may be multiple concurrent sends in the system). The IOCTL also
checks that the specified send was started by the current process.
On Linux, different threads of the same process are represented as
different `struct task_struct`s (and, confusingly, have different
PID's). To check if if two threads are in the same process, we need to
check if they have the same `struct task_struct:group_leader`.
We used to to this correctly, but it was inadvertently changed by
30af21b025 (Redacted Send) to simply check if the current
`struct task_struct` is the one that started the send.
This commit changes the code back to checking if the send was started by
a `struct task_struct` with the same `group_leader` as the calling
thread.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Chris Wedgwood <cw@f00f.org>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10215Closes#10216
Propagate changes in HEAD that mostly eliminate object locking.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10205
Minor fixes on persistent L2ARC improving code readability and fixing
a typo in zdb.c when byte-swapping a log block. It also improves the
pesist_l2arc_007_pos.ksh test by giving it more time to retrieve log
blocks on the cache device.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam D. Moss <c@yotes.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#10210
Remove some obsolete legacy compat, rename some misnamed, and add some
missing tunables for FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10203
Add the FreeBSD platform code to the OpenZFS repository. As of this
commit the source can be compiled and tested on FreeBSD 11 and 12.
Subsequent commits are now required to compile on FreeBSD and Linux.
Additionally, they must pass the ZFS Test Suite on FreeBSD which is
being run by the CI. As of this commit 1230 tests pass on FreeBSD
and there are no unexpected failures.
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#898Closes#8987
The memory and cpu cost of reference count tracking with the current
implementation is significant. For this reason it has always been
disabled by default for the kmods. Apply this same default to user
space so ztest doesn't always incur this performance penalty.
Our intention is to re-enable this by default for ztest once the code
has been optimized. Since we expect to at some point provide a FUSE
implementation we wouldn't want this enabled by default for libzpool.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10189
We can improve the performance of writes to zvols by using
dmu_tx_hold_write_by_dnode() instead of dmu_tx_hold_write(). This
reduces lock contention on the first block of the dnode object, and also
reduces the amount of CPU needed. The benefit will be highest with
multi-threaded async writes (i.e. writes that don't call zil_commit()).
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10184
This commit makes the L2ARC persistent across reboots. We implement
a light-weight persistent L2ARC metadata structure that allows L2ARC
contents to be recovered after a reboot. This significantly eases the
impact a reboot has on read performance on systems with large caches.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Saso Kiselkov <skiselkov@gmail.com>
Co-authored-by: Jorgen Lundman <lundman@lundman.net>
Co-authored-by: George Amanakis <gamanakis@gmail.com>
Ported-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#925Closes#1823Closes#2672Closes#3744Closes#9582
Set arc_c_min before arc_c_max so that when zfs_arc_min is set lower
than the default allmem/32 zfs_arc_max can also be set lower.
Add warning messages when tunables are being ignored.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10157Closes#10158
By default it's not possible to open a device already owned by an
active vdev. It's necessary to make an exception to this for vdev
split. The FreeBSD platform code will make an exception if
spa_is splitting is set to to true.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10178
Commit https://github.com/torvalds/linux/commit/3d745ea5 simplified
the blk_alloc_queue() interface by updating it to take the request
queue as an argument. Add a wrapper function which accepts the new
arguments and internally uses the available interfaces.
Other minor changes include increasing the Linux-Maximum to 5.6 now
that 5.6 has been released. It was not bumped to 5.7 because this
release has not yet been finalized and is still subject to change.
Added local 'struct zvol_state_os *zso' variable to zvol_alloc.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10181Closes#10187
Added to prevent a possible deadlock, the following comments from
FreeBSD explain the issue. The comment describing vn_io_fault_uiomove:
/*
* Helper function to perform the requested uiomove operation using
* the held pages for io->uio_iov[0].iov_base buffer instead of
* copyin/copyout. Access to the pages with uiomove_fromphys()
* instead of iov_base prevents page faults that could occur due to
* pmap_collect() invalidating the mapping created by
* vm_fault_quick_hold_pages(), or pageout daemon, page laundry or
* object cleanup revoking the write access from page mappings.
*
* Filesystems specified MNTK_NO_IOPF shall use vn_io_fault_uiomove()
* instead of plain uiomove().
*/
This used for vn_io_fault which has the following motivation:
/*
* The vn_io_fault() is a wrapper around vn_read() and vn_write() to
* prevent the following deadlock:
*
* Assume that the thread A reads from the vnode vp1 into userspace
* buffer buf1 backed by the pages of vnode vp2. If a page in buf1 is
* currently not resident, then system ends up with the call chain
* vn_read() -> VOP_READ(vp1) -> uiomove() -> [Page Fault] ->
* vm_fault(buf1) -> vnode_pager_getpages(vp2) -> VOP_GETPAGES(vp2)
* which establishes lock order vp1->vn_lock, then vp2->vn_lock.
* If, at the same time, thread B reads from vnode vp2 into buffer buf2
* backed by the pages of vnode vp1, and some page in buf2 is not
* resident, we get a reversed order vp2->vn_lock, then vp1->vn_lock.
*
* To prevent the lock order reversal and deadlock, vn_io_fault() does
* not allow page faults to happen during VOP_READ() or VOP_WRITE().
* Instead, it first tries to do the whole range i/o with pagefaults
* disabled. If all pages in the i/o buffer are resident and mapped,
* VOP will succeed (ignoring the genuine filesystem errors).
* Otherwise, we get back EFAULT, and vn_io_fault() falls back to do
* i/o in chunks, with all pages in the chunk prefaulted and held
* using vm_fault_quick_hold_pages().
*
* Filesystems using this deadlock avoidance scheme should use the
* array of the held pages from uio, saved in the curthread->td_ma,
* instead of doing uiomove(). A helper function
* vn_io_fault_uiomove() converts uiomove request into
* uiomove_fromphys() over td_ma array.
*
* Since vnode locks do not cover the whole i/o anymore, rangelocks
* make the current i/o request atomic with respect to other i/os and
* truncations.
*/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10177
Linux and FreeBSD have different parameters for tunable proc handler.
This has prevented FreeBSD from implementing the ZFS_MODULE_PARAM_CALL
macro.
To complete the sharing of ZFS_MODULE_PARAM_CALL declarations, create
per-platform definitions of the parameter list, ZFS_MODULE_PARAM_ARGS.
With the declarations wired up we discovered an incorrect scope prefix
for spa_slop_shift, so this is now fixed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10179
Add a mechanism to wait for delete queue to drain.
When doing redacted send/recv, many workflows involve deleting files
that contain sensitive data. Because of the way zfs handles file
deletions, snapshots taken quickly after a rm operation can sometimes
still contain the file in question, especially if the file is very
large. This can result in issues for redacted send/recv users who
expect the deleted files to be redacted in the send streams, and not
appear in their clones.
This change duplicates much of the zpool wait related logic into a
zfs wait command, which can be used to wait until the internal
deleteq has been drained. Additional wait activities may be added
in the future.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#9707
In zfs_write(), the loop continues to the next iteration without
accounting for partial copies occurring in uiomove_iov when
copy_from_user/__copy_from_user_inatomic return a non-zero status.
This results in "zfs: accessing past end of object..." in the
kernel log, and the write failing.
Account for partial copies and update uio struct before returning
EFAULT, leave a comment explaining the reason why this is done.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: ilbsmart <wgqimut@gmail.com>
Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com>
Closes#8673Closes#10148
== Summary ==
Prior to this change, sync writes to a zvol are processed serially.
This commit makes zvols process concurrently outstanding sync writes in
parallel, similar to how reads and async writes are already handled.
The result is that the throughput of sync writes is tripled.
== Background ==
When a write comes in for a zvol (e.g. over iscsi), it is processed by
calling `zvol_request()` to initiate the operation. ZFS is expected to
later call `BIO_END_IO()` when the operation completes (possibly from a
different thread). There are a limited number of threads that are
available to call `zvol_request()` - one one per iscsi client (unless
using MC/S). Therefore, to ensure good performance, the latency of
`zvol_request()` is important, so that many i/o operations to the zvol
can be processed concurrently. In other words, if the client has
multiple outstanding requests to the zvol, the zvol should have multiple
outstanding requests to the storage hardware (i.e. issue multiple
concurrent `zio_t`'s).
For reads, and async writes (i.e. writes which can be acknowledged
before the data reaches stable storage), `zvol_request()` achieves low
latency by dispatching the bulk of the work (including waiting for i/o
to disk) to a taskq. The taskq callback (`zvol_read()` or
`zvol_write()`) blocks while waiting for the i/o to disk to complete.
The `zvol_taskq` has 32 threads (by default), so we can have up to 32
concurrent i/os to disk in service of requests to zvols.
However, for sync writes (i.e. writes which must be persisted to stable
storage before they can be acknowledged, by calling `zil_commit()`),
`zvol_request()` does not use `zvol_taskq`. Instead it blocks while
waiting for the ZIL write to disk to complete. This has the effect of
serializing sync writes to each zvol. In other words, each zvol will
only process one sync write at a time, waiting for it to be written to
the ZIL before accepting the next request.
The same issue applies to FLUSH operations, for which `zvol_request()`
calls `zil_commit()` directly.
== Description of change ==
This commit changes `zvol_request()` to use
`taskq_dispatch_ent(zvol_taskq)` for sync writes, and FLUSh operations.
Therefore we can have up to 32 threads (the taskq threads)
simultaneously calling `zil_commit()`, for a theoretical performance
improvement of up to 32x.
To avoid the locking issue described in the comment (which this commit
removes), we acquire the rangelock from the taskq callback (e.g.
`zvol_write()`) rather than from `zvol_request()`. This applies to all
writes (sync and async), reads, and discard operations. This means that
multiple simultaneously-outstanding i/o's which access the same block
can complete in any order. This was previously thought to be incorrect,
but a review of the block device interface requirements revealed that
this is fine - the order is inherently not defined. The shorter hold
time of the rangelock should also have a slight performance improvement.
For an additional slight performance improvement, we use
`taskq_dispatch_ent()` instead of `taskq_dispatch()`, which avoids a
`kmem_alloc()` and eliminates a failure mode. This applies to all
writes (sync and async), reads, and discard operations.
== Performance results ==
We used a zvol as an iscsi target (server) for a Windows initiator
(client), with a single connection (the default - i.e. not MC/S).
We used `diskspd` to generate a workload with 4 threads, doing 1MB
writes to random offsets in the zvol. Without this change we get
231MB/s, and with the change we get 728MB/s, which is 3.15x the original
performance.
We ran a real-world workload, restoring a MSSQL database, and saw
throughput 2.5x the original.
We saw more modest performance wins (typically 1.5x-2x) when using MC/S
with 4 connections, and with different number of client threads (1, 8,
32).
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10163
Increasing l2arc_write_size or l2arc_write_boost can result in
l2arc_write_buffers() not having enough space to perform its writes and
panic zio_write_phys().
Instead of resetting l2ad_hand to l2ad_start at the end of
l2arc_write_buffers() and not taking into account a possible
user-mediated increase of l2arc_write_max, we do this in l2arc_evict(),
right after l2arc_write_size() has run. If there is not enough space to
evict (ie we will exceed l2ad_end) we evict to the end of the device,
reset l2ad_hand to l2ad_start, set l2ad_first to 0 and iterate
l2arc_evict(). We avoid infinite iteration of l2arc_evict() by making
sure in l2arc_write_size() that l2ad_start + size does not exceed
l2ad_end.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#10154
Linux changed the default max ARC size to 1/2 of physical memory to
deal with shortcomings of the Linux SLUB allocator. Other platforms
do not require the same logic.
Implement an arc_default_max() function to determine a default max ARC
size in platform code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10155
Make the cityhash code compile into libzfs, in preparation for the new
"zstream" command.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10152
These paths are never exercised, as the parameters given are always
different cipher and plaintext `crypto_data_t` pointers.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fueloep <attila@fueloep.org>
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Closes#9661Closes#10015
If a has rollback has occurred while a file is open and unlinked.
Then when the file is closed post rollback it will not exist in the
rolled back version of the unlinked object. Therefore, the call to
zap_remove_int() may correctly return ENOENT and should be allowed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6812Closes#9739
This change adds a separate return code to zfs_ioc_recv that is used
for incomplete streams, in addition to the existing return code for
streams that contain corruption.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#10122
There are a couple of x86_64 architectures which support all needed
features to make the accelerated GCM implementation work but the
MOVBE instruction. Those are mainly Intel Sandy- and Ivy-Bridge
and AMD Bulldozer, Piledriver, and Steamroller.
By using MOVBE only if available and replacing it with a MOV
followed by a BSWAP if not, those architectures now benefit from
the new GCM routines and performance is considerably better
compared to the original implementation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam D. Moss <c@yotes.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Followup #9749Closes#10029
For each WRITE record in the stream, `zfs receive` creates a DMU
transaction (`dmu_tx_create()`) and writes this block's data into the
object. If per-block overheads (as opposed to per-byte overheads)
dominate performance (as is often the case with small recordsize), the
per-dmu-transaction overheads can be significant. For example, in some
workloads the `receieve_writer` thread is 100% on CPU, and more than
half of its CPU time is in these per-tx routines (e.g.
dmu_tx_hold_write, dmu_tx_assign, dmu_tx_commit).
To improve performance of `zfs receive`, this commit batches WRITE
records which are to nearby offsets of the same object, and uses one DMU
transaction to write them all. By default the batch size is 1MB, which
for recordsize=8K reduces the number of DMU transactions by 128x for
full send streams (incrementals will depend on how "clumpy" the changed
blocks are).
This commit improves the performance of `dd if=stream | zfs recv`
from 78,800 blocks/sec to 98,100 blocks/sec (25% improvement).
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10099
The normal lock order is that the dp_config_rwlock must be held before
the ds_opening_lock. For example, dmu_objset_hold() does this.
However, dmu_objset_open_impl() is called with the ds_opening_lock held,
and if the dp_config_rwlock is not already held, it will attempt to
acquire it. This may lead to deadlock, since the lock order is
reversed.
Looking at all the callers of dmu_objset_open_impl() (which is
principally the callers of dmu_objset_from_ds()), almost all callers
already have the dp_config_rwlock. However, there are a few places in
the send and receive code paths that do not. For example:
dsl_crypto_populate_key_nvlist, send_cb, dmu_recv_stream,
receive_write_byref, redact_traverse_thread.
This commit resolves the problem by requiring all callers ot
dmu_objset_from_ds() to hold the dp_config_rwlock. In most cases, the
code has been restructured such that we call dmu_objset_from_ds()
earlier on in the send and receive processes, when we already have the
dp_config_rwlock, and save the objset_t until we need it in the middle
of the send or receive (similar to what we already do with the
dsl_dataset_t). Thus we do not need to acquire the dp_config_rwlock in
many new places.
I also cleaned up code in dmu_redact_snap() and send_traverse_thread().
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#9662Closes#10115
Attempt to run scrub or resilver on a new pool containing only special
allocations (special vdev added on creation) caused infinite loop
because of dsl_scan_should_clear() limiting memory usage to 5% of pool
size, which it calculated accounting only normal allocation class.
Addition of special and just in case dedup classes fixes the issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#10106Closes#8694
dnode_special_close() waits for the refcount of dn_holds to go to zero
without holding the dn_mtx. dnode_rele_and_unlock() does the final
remove to dn_holds with dn_mtx being held:
refs = zfs_refcount_remove(&dn->dn_holds, tag);
mutex_exit(&dn->dn_mtx);
So, there is a race condition after the remove until dn_mtx is
dropped. During that time, dnode_destroy() can get called, which ends
up in dnode_dest() calling mutex_destroy() and a panic since the lock
is still held.
This change adds a condvar to wait for the final dnode_rele_and_unlock()
to release the dn_mtx before calling dnode_destroy().
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: John Poduska <jpoduska@datto.com>
Closes#7814Closes#10101
Using zfs with Lustre, an arc_read can trigger kernel memory allocation
that in turn leads to a memory reclaim callback and a deadlock within a
single zfs process. This change uses spl_fstrans_mark and
spl_trans_unmark to prevent the reclaim attempt and the deadlock
(https://zfsonlinux.topicbox.com/groups/zfs-devel/T4db2c705ec1804ba).
The stack trace observed is:
__schedule at ffffffff81610f2e
schedule at ffffffff81611558
schedule_preempt_disabled at ffffffff8161184a
__mutex_lock at ffffffff816131e8
arc_buf_destroy at ffffffffa0bf37d7 [zfs]
dbuf_destroy at ffffffffa0bfa6fe [zfs]
dbuf_evict_one at ffffffffa0bfaa96 [zfs]
dbuf_rele_and_unlock at ffffffffa0bfa561 [zfs]
dbuf_rele_and_unlock at ffffffffa0bfa32b [zfs]
osd_object_delete at ffffffffa0b64ecc [osd_zfs]
lu_object_free at ffffffffa06d6a74 [obdclass]
lu_site_purge_objects at ffffffffa06d7fc1 [obdclass]
lu_cache_shrink_scan at ffffffffa06d81b8 [obdclass]
shrink_slab at ffffffff811ca9d8
shrink_node at ffffffff811cfd94
do_try_to_free_pages at ffffffff811cfe63
try_to_free_pages at ffffffff811d01c4
__alloc_pages_slowpath at ffffffff811be7f2
__alloc_pages_nodemask at ffffffff811bf3ed
new_slab at ffffffff81226304
___slab_alloc at ffffffff812272ab
__slab_alloc at ffffffff8122740c
kmem_cache_alloc at ffffffff81227578
spl_kmem_cache_alloc at ffffffffa048a1fd [spl]
arc_buf_alloc_impl at ffffffffa0befba2 [zfs]
arc_read at ffffffffa0bf0924 [zfs]
dbuf_read at ffffffffa0bf9083 [zfs]
dmu_buf_hold_by_dnode at ffffffffa0c04869 [zfs]
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mark Roper <markroper@gmail.com>
Closes#9987
When doing a zfs send on a dataset with small recordsize (e.g. 8K),
performance is dominated by the per-block overheads. This is especially
true with `zfs send --compressed`, which further reduces the amount of
data sent, for the same number of blocks. Several threads are involved,
but the limiting factor is the `send_prefetch` thread, which is 100% on
CPU.
The main job of the `send_prefetch` thread is to issue zio's for the
data that will be needed by the main thread. It does this by calling
`arc_read(ARC_FLAG_PREFETCH)`. This has an immediate cost of creating
an arc_hdr, which takes around 14% of one CPU. It also induces later
costs by other threads:
* Since the data was only prefetched, dmu_send()->dmu_dump_write() will
need to call arc_read() again to get the data. This will have to
look up the arc_hdr in the hash table and copy the data from the
scatter ABD in the arc_hdr to a linear ABD in arc_buf. This takes
27% of one CPU.
* dmu_dump_write() needs to arc_buf_destroy() This takes 11% of one
CPU.
* arc_adjust() will need to evict this arc_hdr, taking about 50% of one
CPU.
All of these costs can be avoided by bypassing the ARC if the data is
not already cached. This commit changes `zfs send` to check for the
data in the ARC, and if it is not found then we directly call
`zio_read()`, reading the data into a linear ABD which is used by
dmu_dump_write() directly.
The performance improvement is best expressed in terms of how many
blocks can be processed by `zfs send` in one second. This change
increases the metric by 50%, from ~100,000 to ~150,000. When the amount
of data per block is small (e.g. 2KB), there is a corresponding
reduction in the elapsed time of `zfs send >/dev/null` (from 86 minutes
to 58 minutes in this test case).
In addition to improving the performance of `zfs send`, this change
makes `zfs send` not pollute the ARC cache. In most cases the data will
not be reused, so this allows us to keep caching useful data in the MRU
(hit-once) part of the ARC.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10067
Filesystems allow overlay mounts by default on FreeBSD and Linux.
Respect the native convention by switching the default to overlay=on,
while retaining the option to turn the property off for compatibility
with other operating systems' conventions.
Update documentation and tests accordingly.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10030
Also dprintf_bp() in case BLK_VERIFY_HALT of zfs_blkptr_verify_log()
since dprintf_bp() in zfs_blkptr_verify() will never be executed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Justin Keogh <commits@v6y.net>
Closes#10086
Manual trims fall into the category of long-running pool activities
which people might want to wait synchronously for. This change adds
support to 'zpool wait' for waiting for manual trim operations to
complete. It also adds a '-w' flag to 'zpool trim' which can be used to
turn 'zpool trim' into a synchronous operation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes#10071
__zio_execute() calls zio_taskq_member() to determine if we are running
in a zio interrupt taskq, in which case we may need to switch to
processing this zio in a zio issue taskq. The call to
zio_taskq_member() can become a performance bottleneck when we are
processing a high rate of zio's.
zio_taskq_member() calls taskq_member() on each of the zio interrupt
taskqs, of which there are 21. This is slow because each call to
taskq_member() does tsd_get(taskq_tsd), which on Linux is relatively
slow.
This commit improves the performance of zio_taskq_member() by having it
cache the value of tsd_get(taskq_tsd), reducing the number of those
calls to 1/21th of the current behavior.
In a test case running `zfs send -c >/dev/null` of a filesystem with
small blocks (average 2.5KB/block), zio_taskq_member() was using 6.7% of
one CPU, and with this change it is reduced to 1.3%. Overall time to
perform the `zfs send` reduced by 10% (~150,000 block/sec to ~165,000
blocks/sec).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10070
This function should only return "linux" on Linux.
Move the kernel part of the function out of common code.
Fix the tests for FreeBSD.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10079
FreeBSD has a somewhat more cumbersome locking and refcounting
protocol for the platform counterpart to znode. We need to not call
zrele on the passed zp, but do need to do so on any intermediate zp.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10075
By adding a zfs_file_private accessor to the common
interfaces and some extensions to FreeBSD platform
code it is now possible to share the implementations
for the aforementioned functions.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10073
When "zfs destroy" is run, it completes quickly, and in the background
we locate the blocks to free and free them. This background activity
can be observed with `zpool get freeing` and `zpool wait -t free ...`.
This background activity is processed by a single thread (the spa_sync
thread) which calls zio_free() on each of the blocks to free. With even
modest storage performance, the CPU consumption of zio_free() can be the
performance bottleneck.
Performance of zio_free() can be improved by not actually creating a
zio_t in the common case (non-dedup, non-gang), instead calling
metaslab_free() directly. This avoids the CPU cost of allocating the
zio_t, and more importantly the cost of adding and later removing this
zio_t from the parent zio's child list.
The result is that performance of background freeing more than doubles,
from 0.6 million blocks per second to 1.3 million blocks per second.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10034
Commit https://github.com/torvalds/linux/commit/9e8d42a0f accidentally
converted the static inline function blkg_tryget() to GPL-only for
kernels built with CONFIG_PREEMPT_RCU=y and CONFIG_BLK_CGROUP=y.
Resolve the build issue by providing our own equivalent functionality
when needed which uses rcu_read_lock_sched() internally as before.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9745Closes#10072
The following check currently occurs in three separate locations
in dbuf.c. This change consolidates those checks in to the
dbuf_alloc_arcbuf_from_arcbuf() function.
if (arc_is_encrypted(data)) {
...
} else if (compress_type != ZIO_COMPRESS_OFF) {
...
} else {
...
}
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10057
As part of the Linux kernel's y2038 changes the time_t type has been
fully retired. Callers are now required to use the time64_t type.
Rather than move to the new type, I've removed the few remaining
places where a time_t is used in the kernel code. They've been
replaced with a uint64_t which is already how ZFS internally
handled these values.
Going forward we should work towards updating the remaining user
space time_t consumers to the 64-bit interfaces.
Reviewed-by: Matthew Macy <mmacy@freebsd.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10052Closes#10064
* Add dedicated donde_set_dirtyctx routine.
* Add empty dirty record on destroy assertion.
* Make much more extensive use of the SET_ERROR macro.
Reviewed-by: Will Andrews <wca@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9924
Sleepable (KM_SLEEP) allocations cannot fail. Hence
error handling for them is not useful.
Reviewed-By: Tom Caputi <tcaputi@datto.com>
Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10031
The `convoff` function is called only in one code path in `zfs_space`.
Each caller of `zfs_space` is called with a `flock64_t` that has
`l_whence` set to `SEEK_SET`. This means that `convoff` always results
in a no-op as the `bfp` parameter has `l_whence` set to `SEEK_SET` and
`int whence` is `SEEK_SET` as well.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Closes#10006
There are several structs (and members of structs) related to redaction,
which are no longer used. This commit removes them.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10039
When zfs is built in-tree using --enable-linux-builtin, the compile
commands are executed from the kernel build directory. If the build
directory is different from the kernel source directory, passing
-Ifs/zfs/icp will not find the headers as they are not present in the
build directory.
Fix this by adding @abs_top_srcdir@ to pull the headers from the zfs
source tree instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10021
We have have made the necessary changes in our module code to expose
zevents through both devd and the zpool events ioctl. Now the tunables
can be exposed and zpool events tests can be enabled on both platforms.
A few minor tweaks to the tests were needed to accommodate the way wc
formats output on FreeBSD.
zed remains to be ported.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10008
Create dedicated dbuf_read_hole and dbuf_read_bonus.
Additionally, add a dtrace probe to allow state change tracing.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Will Andrews <wca@FreeBSD.org>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Authored-by: Will Andrews <wca@FreeBSD.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9923
Moving forward, we wish to use org.openzfs (no dash) rather than
org.open-zfs or org.zfsonlinux for feature GUIDs and property names.
The existing feature GUIDs cannot be changed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#10003
Unlinked files don't respect synchronous flush commands, but when they get relinked
their state is unknown. Previously we force flushed all such files even when
sync=disabled. Correct this case.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: DHE <git@dehacked.net>
Closes#10005
This adds support for setting user properties in a
zfs channel program by adding 'zfs.sync.set_prop'
and 'zfs.check.set_prop' to the ZFS LUA API.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Co-authored-by: Sara Hartse <sara.hartse@delphix.com>
Contributions-by: Jason King <jason.king@joyent.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Jason King <jason.king@joyent.com>
Closes#9950
The module parameter zfs_async_block_max_blocks limits the number of
blocks that can be freed by the background freeing of filesystems and
snapshots (from "zfs destroy"), in one TXG. This is useful when freeing
dedup blocks, becuase each zio_free() of a dedup block can require an
i/o to read the relevant part of the dedup table (DDT), and will also
dirty that block.
zfs_async_block_max_blocks is set to 100,000 by default. For the more
typical case where dedup is not used, this can have a negative
performance impact on the rate of background freeing (from "zfs
destroy"). For example, with recordsize=8k, and TXG's syncing once
every 5 seconds, we can free only 160MB of data per second, which may be
much less than the rate we can write data.
This change increases zfs_async_block_max_blocks to be unlimited by
default. To address the dedup freeing issue, a new tunable is
introduced, zfs_max_async_dedup_frees, which limits the number of
zio_free()'s of dedup blocks done by background destroys, per txg. The
default is 100,000 free's (same as the old zfs_async_block_max_blocks
default).
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10000
When growing the size of a (VMEM or KVMEM) kmem cache, spl_cache_grow()
always does taskq_dispatch(spl_cache_grow_work), and then waits for the
KMC_BIT_GROWING to be cleared by the taskq thread.
The taskq thread (spl_cache_grow_work()) does:
1. allocate new slab and add to list
2. wake_up_all(skc_waitq)
3. clear_bit(KMC_BIT_GROWING)
Therefore, the waiting thread can wake up before GROWING has been
cleared. It will see that the growing has not yet completed, and go
back to sleep until it hits the 100ms timeout.
This can have an extreme performance impact on workloads that alloc/free
more than fits in the (statically-sized) magazines. These workloads
allocate and free slabs with high frequency.
The problem can be observed with `funclatency spl_cache_grow`, which on
some workloads shows that 99.5% of the time it takes <64us to allocate
slabs, but we spend ~70% of our time in outliers, waiting for the 100ms
timeout.
The fix is to do `clear_bit(KMC_BIT_GROWING)` before
`wake_up_all(skc_waitq)`.
A future investigation should evaluate if we still actually need to
taskq_dispatch() at all, and if so on which kernel versions.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#9989
Since AVL already has embedded element counter, use dn_dbufs_count
only for dbufs not counted there (bonus buffers) and just add them.
This removes two atomics per dbuf life cycle.
According to profiler it reduces time spent by dbuf_destroy() inside
bottlenecked dbuf_evict_thread() from 13.36% to 9.20% of the core.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#9949
Add support for bookmark creation and cloning.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#9571
This feature allows copying existing bookmarks using
zfs bookmark fs#target fs#newbookmark
There are some niche use cases for such functionality,
e.g. when using bookmarks as markers for replication progress.
Copying redaction bookmarks produces a normal bookmark that
cannot be used for redacted send (we are not duplicating
the redaction object).
ZCP support for bookmarking (both creation and copying) will be
implemented in a separate patch based on this work.
Overview:
- Terminology:
- source = existing snapshot or bookmark
- new/bmark = new bookmark
- Implement bookmark copying in `dsl_bookmark.c`
- create new bookmark node
- copy source's `zbn_phys` to new's `zbn_phys`
- zero-out redaction object id in copy
- Extend existing bookmark ioctl nvlist schema to accept
bookmarks as sources
- => `dsl_bookmark_create_nvl_validate` is authoritative
- use `dsl_dataset_is_before` check for both snapshot
and bookmark sources
- Adjust CLI
- refactor shortname expansion logic in `zfs_do_bookmark`
- Update man pages
- warn about redaction bookmark handling
- Add test cases
- CLI
- pyyzfs libzfs_core bindings
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#9571
Coverity reports the variable may be NULL, but due to the
way the dirty records are handled this cannot be the case.
Add a comment and VERIFY to make this clear and silence
the warning.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9962
As explained by the comment in dbuf_read() and above dbuf_read_impl().
Under all circumstances the parent lock specified by dblt should be
dropped when existing dbuf_read_impl(). This was not being done for
two exist paths. Additionally, ensure the mutex is unlocked before
dropping the parent lock.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9968
zdb -R :b fails due to the indirect block being compressed,
and the 'b' and 'd' flag not working in tandem when specified.
Fix the flag parsing code and create a zfs test for zdb -R
block display. Also fix the zio flags where the dotted notation
for the vdev portion of DVA (i.e. 0.0:offset:length) fails.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#9640Closes#9729
We need to do the same thing to update all spas on any OS for these
tunables, so let's share the code.
While here let's match the types of the literals initializing the
variables with the type of the variable.
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9964
Currently SIMD accelerated AES-GCM performance is limited by two
factors:
a. The need to disable preemption and interrupts and save the FPU
state before using it and to do the reverse when done. Due to the
way the code is organized (see (b) below) we have to pay this price
twice for each 16 byte GCM block processed.
b. Most processing is done in C, operating on single GCM blocks.
The use of SIMD instructions is limited to the AES encryption of the
counter block (AES-NI) and the Galois multiplication (PCLMULQDQ).
This leads to the FPU not being fully utilized for crypto
operations.
To solve (a) we do crypto processing in larger chunks while owning
the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced
to make this chunk size tweakable. It defaults to 32 KiB. This step
alone roughly doubles performance. (b) is tackled by porting and
using the highly optimized openssl AES-GCM assembler routines, which
do all the processing (CTR, AES, GMULT) in a single routine. Both
steps together result in up to 32x reduction of the time spend in
the en/decryption routines, leading up to approximately 12x
throughput increase for large (128 KiB) blocks.
Lastly, this commit changes the default encryption algorithm from
AES-CCM to AES-GCM when setting the `encryption=on` property.
Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-By: Jason King <jason.king@joyent.com>
Reviewed-By: Tom Caputi <tcaputi@datto.com>
Reviewed-By: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#9749
Factor the portion of dbuf_sync_leaf() responsible for handling bonus
buffers out in to its own dbuf_sync_bonus() helper function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9909
The timestamp_truncate() function was added, it replaces the existing
timespec64_trunc() function. This change renames our wrapper function
to be consistent with the upstream name and updates the compatibility
code for older kernels accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9956Closes#9961
The proc_ops structure was introduced to replace the use of of the
file_operations structure when registering proc handlers. This
change creates a new kstat_proc_op_t typedef for compatibility
which can be used to pass around the correct structure.
This change additionally adds the 'const' keyword to all of the
existing proc operations structures.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9961
Previous code used 4 atomics to do aggsum_flush_bucket() and 2 more to
re-borrow after the flush. But since asc_borrowed and asc_delta are
accessed only while holding asc_lock, it makes no any sense to modify
as_lower_bound and as_upper_bound in multiple steps. Instead of that
the new code uses only 2 atomics in all the cases, one per as_*_bound
variable. I think even that is overkill, simple atomic store and
load could be used here, since all modifications are done under the
as_lock, but there are no such primitives in ZFS code now.
While there, make borrow code consider previous borrow value, so that
on mixed request patterns reduce chance of needing to borrow again if
much larger request follows tiny one that needed borrow.
Also reduce as_numbuckets from uint64_t to u_int. It makes no sense
to use so large division operation on every aggsum_add().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#9930
This solves the issue of loading the spl module on RISC-V.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes#9942
Move db_link into the same cache line as db_blkid and db_level.
It allows significantly reduce avl_add() time in dbuf_create() on
systems with large RAM and huge number of dbufs per dnode.
Avoid few accesses to dbuf_caches[].size, which is highly congested
under high IOPS and never stays in cache for a long time. Use local
value we are receiving from zfs_refcount_add_many() any way.
Remove cache_size_bytes_max bump from dbuf_evict_one(). I don't see
a point to do it on dbuf eviction after we done it on insertion in
dbuf_rele_and_unlock().
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#9931
Additionally pull in state machine comments about
upcoming async cow work.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9902
It violated sequence described in kstat.h, and at least on FreeBSD
kstat_install() uses provided names to create the sysctls. If the
names are not available at the time, it ends up bad.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#9933
This replaces the placeholder ZFS_PROP_PRIVATE with ZFS_PROP_ACLMODE,
matching what is done in the NFSv4 ACLs PR (#9709).
On FreeBSD we hide ZFS_PROP_ACLTYPE, while on Linux we hide
ZFS_PROP_ACLMODE.
The tests already assume this arrangement.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9913
Clang warns (errors) that "cast from 'const void *' to 'struct v *'
drops const qualifier."
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9917
When we finish a zfs receive, dmu_recv_end_sync() calls
zvol_create_minors(async=TRUE). This kicks off some other threads that
create the minor device nodes (in /dev/zvol/poolname/...). These async
threads call zvol_prefetch_minors_impl() and zvol_create_minor(), which
both call dmu_objset_own(), which puts a "long hold" on the dataset.
Since the zvol minor node creation is asynchronous, this can happen
after the `ZFS_IOC_RECV[_NEW]` ioctl and `zfs receive` process have
completed.
After the first receive ioctl has completed, userland may attempt to do
another receive into the same dataset (e.g. the next incremental
stream). This second receive and the asynchronous minor node creation
can interfere with one another in several different ways, because they
both require exclusive access to the dataset:
1. When the second receive is finishing up, dmu_recv_end_check() does
dsl_dataset_handoff_check(), which can fail with EBUSY if the async
minor node creation already has a "long hold" on this dataset. This
causes the 2nd receive to fail.
2. The async udev rule can fail if zvol_id and/or systemd-udevd try to
open the device while the the second receive's async attempt at minor
node creation owns the dataset (via zvol_prefetch_minors_impl). This
causes the minor node (/dev/zd*) to exist, but the udev-generated
/dev/zvol/... to not exist.
3. The async minor node creation can silently fail with EBUSY if the
first receive's zvol_create_minor() trys to own the dataset while the
second receive's zvol_prefetch_minors_impl already owns the dataset.
To address these problems, this change synchronously creates the minor
node. To avoid the lock ordering problems that the asynchrony was
introduced to fix (see #3681), we create the minor nodes from open
context, with no locks held, rather than from syncing contex as was
originally done.
Implementation notes:
We generally do not need to traverse children or prefetch anything (e.g.
when running the recv, snapshot, create, or clone subcommands of zfs).
We only need recursion when importing/opening a pool and when loading
encryption keys. The existing recursive, asynchronous, prefetching code
is preserved for use in these cases.
Channel programs may need to create zvol minor nodes, when creating a
snapshot of a zvol with the snapdev property set. We figure out what
snapshots are created when running the LUA program in syncing context.
In this case we need to remember what snapshots were created, and then
try to create their minor nodes from open context, after the LUA code
has completed.
There are additional zvol use cases that asynchronously own the dataset,
which can cause similar problems. E.g. changing the volmode or snapdev
properties. These are less problematic because they are not recursive
and don't touch datasets that are not involved in the operation, there
is still potential for interference with subsequent operations. In the
future, these cases should be similarly converted to create the zvol
minor node synchronously from open context.
The async tasks of removing and renaming minors do not own the objset,
so they do not have this problem. However, it may make sense to also
convert these operations to happen synchronously from open context, in
the future.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-65948
Closes#7863Closes#9885
Index type props display as strings, which should be aligned to the
left not to the right.
Before:
```
FreeBSD-13_0-CURRENT-r356528 ➜ ~ zfs list -ro name,aclmode,mountpoint
NAME ACLMODE MOUNTPOINT
p0 passthrough /p0
p0/foo discard /p0/foo
```
After:
```
FreeBSD-13_0-CURRENT-r356528 ➜ ~ zfs list -ro name,aclmode,mountpoint
NAME ACLMODE MOUNTPOINT
p0 passthrough /p0
p0/foo discard /p0/foo
```
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9912
Discovered in preparation of zcp support for creating bookmarks.
Handle the case where dbca_errors is NULL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#9880
The helper function valid_char already allows it but
the doc comment was out of date.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#9879
Implements the RAID-Z function using AltiVec SIMD.
This is basically the NEON code translated to AltiVec.
Note that the 'fletcher' algorithm requires 64-bits
operations, and the initial implementations of AltiVec
(PPC74xx a.k.a. G4, PPC970 a.k.a. G5) only has up to
32-bits operations, so no 'fletcher'.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes#9539
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#9867
Now that the FreeBSD zfs_vnops code avoids asserting that
a vnode lock is held when z_replay is true we can limit
the FreeBSD specific changes to the couple of changes
where it is necessary to drop the vnode locks because
a function returns with it held.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9865
This adds support in channel programs to inherit properties analogous
to `zfs inherit` by adding `zfs.sync.inherit` and `zfs.check.inherit`
functions to the ZFS LUA API.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason King <jason.king@joyent.com>
Closes#9738
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9861
With recent SPL changes there is no longer any need for a per
platform version.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9860
Over the years several slightly different approaches were used
in the Makefiles to determine the target architecture. This
change updates both the build system and Makefile to handle
this in a consistent fashion.
TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64
and made available in the Makefiles to be used as appropriate.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9848
Currently, the handling for errata #4 has two issues which allow
the checks for this issue to be bypassed using resumable sends.
The first issue is that drc->drc_fromsnapobj is not set in the
resuming code as it is in the non-resuming code. This causes
dsl_crypto_recv_key_check() to skip its checks for the
from_ivset_guid. The second issue is that resumable sends do not
clean up their on-disk state if they fail the checks in
dmu_recv_stream() that happen before any data is received.
As a result of these two bugs, a user can attempt a resumable send
of a dataset without a from_ivset_guid. This will fail the initial
dmu_recv_stream() checks, leaving a valid resume state. The send
can then be resumed, which skips those checks, allowing the receive
to be completed.
This commit fixes these issues by setting drc->drc_fromsnapobj in
the resuming receive path and by ensuring that resumablereceives
are properly cleaned up if they fail the initial dmu_recv_stream()
checks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9818Closes#9829
On kernels with KASAN enabled the following failure can be observed as
soon as the zfs module is loaded:
VERIFY(IS_P2ALIGNED(ptr, PAGE_SIZE)) failed
PANIC at spl-kmem-cache.c:228:kv_alloc()
The problem is kmalloc() has never guaranteed aligned allocations; this
requirement resulted in zfsonlinux/spl@8b45dda which removed all
kmalloc() usage in kv_alloc().
Until a GFP_ALIGNED flag (or equivalent functionality) is provided by
the kernel this commit partially reverts 66955885 and 6d948c35 to
prevent k(v)malloc() allocations in kv_alloc().
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#9813
Update the project website links contained in to repository to
reference the secure https://zfsonlinux.org address.
Reviewed-By: Richard Laager <rlaager@wiktel.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9837
This commit adds the --saved (-S) to the 'zfs send' command.
This flag allows a user to send a partially received dataset,
which can be useful when migrating a backup server to new
hardware. This flag is compatible with resumable receives, so
even if the saved send is interrupted, it can be resumed.
The flag does not require any user / kernel ABI changes or any
new feature flags in the send stream format.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Christian Schwarz <me@cschwarz.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9007
For dedup, special and log devices "zpool add -n" does not print
correctly their vdev type:
~# zpool add -n pool dedup /tmp/dedup special /tmp/special log /tmp/log
would update 'pool' to the following configuration:
pool
/tmp/normal
/tmp/dedup
/tmp/special
/tmp/log
This could lead storage administrators to modify their ZFS pools to
unexpected and unintended vdev configurations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#9783Closes#9390
When qat_compress() fails to allocate the required contiguous memory
it mistakenly returns success. This prevents the fallback software
compression from taking over and (un)compressing the block.
Resolve the issue by correctly setting the local 'status' variable
on all exit paths. Furthermore, initialize it to CPA_STATUS_FAIL
to ensure qat_compress() always fails safe to guard against any
similar bugs in the future.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9784Closes#9788
The crypto_cipher_init_prov and crypto_cipher_init are declared static
and should not be exported by the ICP. This resolves the following
warnings observed when building with the 5.4 kernel.
WARNING: "crypto_cipher_init" [.../icp] is a static EXPORT_SYMBOL
WARNING: "crypto_cipher_init_prov" [.../icp] is a static EXPORT_SYMBOL
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9791
- Skip invalid DVAs when importing pools in readonly mode
(in addition to when the config is untrusted).
- Upon encountering a DVA with a null VDEV, fail gracefully
instead of panicking with a NULL pointer dereference.
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Steve Mokris <smokris@softpixel.com>
Closes#9022
Any running 'zpool initialize' or TRIM must be cancelled prior
to the vdev_metaslab_fini() call in spa_vdev_remove_log() which
will unload the metaslabs and set ms->ms_group == NULL.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8602Closes#9751
Move the 'nvh = (void *)buf' assignment after the 'buf == NULL'
check to resolve the warning. Interestingly, cppcheck 1.88
correctly determines that the existing code is safe, while
cppcheck 1.86 reports the warning.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
Suppress autoVariables warnings in the lua interpreter. The usage
here while unconventional in intentional and the same as upstream.
[module/lua/ldebug.c:327]: (error) Address of local auto-variable
assigned to a function parameter.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
The dnp argument can only be set to NULL when the DNODE_DRY_RUN flag
is set. In which case, an early return path will be executed and a
NULL pointer dereference at the given location is impossible. Add
an additional ASSERT to silence the cppcheck warning and document
that dbp must never be NULL at the point in the function.
[module/zfs/dnode.c:1566]: (warning) Possible null pointer deref: dnp
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
As of cppcheck 1.82 surpress the warning regarding shifting too many
bits for __divdi3() implemention. The algorithm used here is correct.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
As of cppcheck 1.82 warnings are issued when using the list_for_each_*
functions with an uninitialized variable. Functionally, this is fine
but to resolve the warning initialize these variables.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
Resolve the following uninitialized variable warnings. In practice
these were unreachable due to the goto. Replacing the goto with a
return resolves the warning and yields more readable code.
[module/icp/algs/modes/ccm.c:892]: (error) Uninitialized variable: ccm_param
[module/icp/algs/modes/ccm.c:893]: (error) Uninitialized variable: ccm_param
[module/icp/algs/modes/gcm.c:564]: (error) Uninitialized variable: gcm_param
[module/icp/algs/modes/gcm.c:565]: (error) Uninitialized variable: gcm_param
[module/icp/algs/modes/gcm.c:599]: (error) Uninitialized variable: gmac_param
[module/icp/algs/modes/gcm.c:600]: (error) Uninitialized variable: gmac_param
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
The NEON code replicates too closely the SSE code, including
a masked 16-bits shift. But NEON, like AltiVec (#9539), has
unsigned 8-bits shift, so use that instead and drop the masking.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes#9725
Explain FreeBSD VFS' unfortunate idiosyncratic locking requirements.
There is no functional change for other platforms.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9720
Apply umask to `mode` which will eventually be applied to inode.
This is needed since VFS doesn't apply umask for O_TMPFILE files.
(Note that zpl_init_acl() applies `ip->i_mode &= ~current_umask();`
only when POSIX ACL is used.)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8997Closes#8998
Currently, 'zfs list' and 'zfs get' commands can be slow when
working with snapshots that have a ds_props_obj. This is
because the code that discovers all of the properties for these
snapshots needs to read this object for each snapshot, which
almost always ends up causing an extra random synchronous read
for each snapshot. This performance penalty exists even if the
properties on that snapshot have been unset because the object
is normally only freed when the snapshot is freed, even though
it is only created when it is needed.
This patch allows the user to regain 'zfs list' performance on
these snapshots by destroying the ds_props_obj when it no longer
has any entries left. In practice on a production machine, this
optimization seems to make 'zfs list' about 55% faster.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9704
FreeBSD's vfs currently doesn't permit file systems
to do their own locking. To avoid having to have
duplicate zfs functions with and without locking add
locking here. With luck these changes can be removed
in the future.
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9715
After spa_vdev_remove_aux() is called, the config nvlist is no longer
valid, as it's been replaced by the new one (with the specified device
removed). Therefore any pointers into the nvlist are no longer valid.
So we can't save the result of
`fnvlist_lookup_string(nv, ZPOOL_CONFIG_PATH)` (in vd_path) across the
call to spa_vdev_remove_aux().
Instead, use spa_strdup() to save a copy of the string before calling
spa_vdev_remove_aux.
Found by AddressSanitizer:
ERROR: AddressSanitizer: heap-use-after-free on address ...
READ of size 34 at 0x608000a1fcd0 thread T686
#0 0x7fe88b0c166d (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x5166d)
#1 0x7fe88a5acd6e in spa_strdup spa_misc.c:1447
#2 0x7fe88a688034 in spa_vdev_remove vdev_removal.c:2259
#3 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229
#4 0x55ffbc769fba in ztest_execute ztest.c:6714
#5 0x55ffbc779a90 in ztest_thread ztest.c:6761
#6 0x7fe889cbc6da in start_thread
#7 0x7fe8899e588e in __clone
0x608000a1fcd0 is located 48 bytes inside of 88-byte region
freed by thread T686 here:
#0 0x7fe88b14e7b8 in __interceptor_free
#1 0x7fe88ae541c5 in nvlist_free nvpair.c:874
#2 0x7fe88ae543ba in nvpair_free nvpair.c:844
#3 0x7fe88ae57400 in nvlist_remove_nvpair nvpair.c:978
#4 0x7fe88a683c81 in spa_vdev_remove_aux vdev_removal.c:185
#5 0x7fe88a68857c in spa_vdev_remove vdev_removal.c:2221
#6 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229
#7 0x55ffbc769fba in ztest_execute ztest.c:6714
#8 0x55ffbc779a90 in ztest_thread ztest.c:6761
#9 0x7fe889cbc6da in start_thread
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#9706
The quota functions are common to all implementations and can be
moved to common code. As a simplification they were moved to the
Linux platform code in the initial refactoring.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#9710
Add the 'zfs jail/unjail' subcommands along with the relevant
documentation from FreeBSD. This feature is not supported on
Linux and still requires the match kernel ioctls which will
be included when the FreeBSD platform code is integrated.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#9686
Change many of the znops routines to take a znode rather
than an inode so that zfs_replay code can be largely shared
and in the future the much of the znops code may be shared.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9708
This interferes with zdb_read_block trying all the decompression
algorithms when the 'd' flag is specified, as some are
expected to fail. Also control the output when guessing
algorithms, try the more common compression types first, allow
specifying lsize/psize, and fix an uninitialized variable.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#9612Closes#9630
The zfsvfs->z_sb field is Linux specified and should be abstracted.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9697
This change allows us to align the code dump logic across platforms.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9691
The dsl_dataset_deactivate_feature_impl() function is private and
should be marked as such.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9696
Update the vdev_disk_open() retry logic to use a specified number
of milliseconds to be more robust. Additionally, on failure log
both the time waited and requested timeout to the internal log.
The default maximum allowed open retry time has been increased
from 500ms to 1000ms.
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9680
The sysfs infrastructure for reporting supported features and
properties is Linux specific. Disable it on FreeBSD until it can
be extended to be more portable.
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9684
If gcm_mode_encrypt_contiguous_blocks() is called more than once
in succession, with the accumulated lengths being less than
blocksize, ctx->copy_to will be incorrectly advanced. Later, if
out is NULL, the bcopy at line 114 will overflow
ctx->gcm_copy_to since ctx->gcm_remainder_len is larger than the
ctx->gcm_copy_to buffer can hold.
The fix is to set ctx->copy_to only if it's not already set.
For ZoL the issue may be academic, since in all my testing I wasn't
able to hit neither of both conditions needed to trigger it, but
other consumers can easily do so.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#9660
FreeBSD uses its own crypto framework in-kernel which, at this time,
has no EDONR implementation.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#9664
Update zfs_deadman_failmode to use the ZFS_MODULE_PARAM_CALL
wrapper, and split the common and platform specific portions.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9670
Remove the ASSERTV macro and handle suppressing unused
compiler warnings for variables only in ASSERTs using the
__attribute__((unused)) compiler annotation. The annotation
is understood by both gcc and clang.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9671
In gcm_mode_decrypt_contiguous_blocks(), if vmem_alloc() fails,
bcopy is called with a NULL pointer destination and a length > 0.
This results in undefined behavior. Further ctx->gcm_pt_buf is
freed but not set to NULL, leading to a potential write after
free and a double free due to missing return value handling in
crypto_update_uio(). The code as is may write to ctx->gcm_pt_buf
in gcm_decrypt_final() and may free ctx->gcm_pt_buf again in
aes_decrypt_atomic().
The fix is to slightly rework error handling and check the return
value in crypto_update_uio().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#9659
In case L2ARC read failed, l2arc_read_done() creates _different_ ZIO
to read data from the original storage device. Unfortunately pointer
to the failed ZIO remains in hdr->b_l1hdr.b_acb->acb_zio_head, and if
some other read try to bump the ZIO priority, it will crash.
The problem is reproducible by corrupting L2ARC content and reading
some data with prefetch if l2arc_noprefetch tunable is changed to 0.
With the default setting the issue is probably not reproducible now.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#9648
There may be circumstances where it's desirable that all blocks
in a specified dataset be stored on the special device. Relax
the artificial 128K limit and allow the special_small_blocks
property to be set up to 1M. When blocks >1MB have been enabled
via the zfs_max_recordsize module option, this limit is increased
accordingly.
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9131Closes#9355
The module_param_call() functionality is currently still
Linux-specific and should be wrapped accordingly.
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9666
The write_record() function is private and should be marked as such.
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9665
Moving qsort to the platform header allows each platform to
provide an appropriate sorting implementation.
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9663
Remove the specific gitignore rules for module left-overs and add a
generic one in modules/.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#9656
FreeBSD needs to cope with multiple version of the zfs_cmd_t
structure. Allowing the platform code to pre and post
process the cmd structure makes it possible to work with
legacy tooling.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9624
KM_PUSHPAGE is an Illumosism - On FreeBSD it's
aliased to the same malloc flag as KM_SLEEP.
The compiler naturally rejects multiple case
statements with the same value. This is effectively
a no-op since all callers pass a specific KM_* flag.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9643
fallocate(2) is a Linux-specific system call which in unavailable
on other platforms.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9633
FreeBSD needs to be able to pass the jail id to the jail/unjail ioctls
and the struct file in the device structure is unused.
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9625
As described in commit f81d5ef6 the zfs_vdev_elevator module
option is being removed. Users who require this functionality
should update their systems to set the disk scheduler using a
udev rule.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8664Closes#9417Closes#9609
If a device is participating in an active resilver, then it will have a
non-empty DTL. Operations like vdev_{open,reopen,probe}() can cause the
resilver to be restarted (or deferred to be restarted later), which is
unnecessary if the DTL is still covered by the current scan range. This
is similar to the logic in vdev_dtl_should_excise() where the DTL can
only be excised if it's max txg is in the resilvered range.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: John Poduska <jpoduska@datto.com>
Issue #840Closes#9155Closes#9378Closes#9551Closes#9588
The changes in commit 41e1aa2a / PR #9583 introduced a regression on
tmpfile_001_pos: fsetxattr() on a O_TMPFILE file descriptor started
to fail with errno ENODATA:
openat(AT_FDCWD, "/test", O_RDWR|O_TMPFILE, 0666) = 3
<...>
fsetxattr(3, "user.test", <...>, 64, 0) = -1 ENODATA
The originally proposed change on PR #9583 is not susceptible to it,
so just move the code/if-checks around back in that way, to fix it.
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Original-patch-by: Heitor Alves de Siqueira <halves@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Closes#9602
Provide a common zfs_file_* interface which can be implemented on all
platforms to perform normal file access from either the kernel module
or the libzpool library.
This allows all non-portable vnode_t usage in the common code to be
replaced by the new portable zfs_file_t. The associated vnode and
kobj compatibility functions, types, and macros have been removed
from the SPL. Moving forward, vnodes should only be used in platform
specific code when provided by the native operating system.
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9556
Reinstate the zpl_revalidate() functionality to resolve a regression
where dentries for open files during a rollback are not invalidated.
The unrelated functionality for automatically unmounting .zfs/snapshots
was not reverted. Nor was the addition of shrink_dcache_sb() to the
zfs_resume_fs() function.
This issue was not immediately caught by the CI because the test case
intended to catch it was included in the list of ZTS tests which may
occasionally fail for unrelated reasons. Remove all of the rollback
tests from this list to help identify the frequency of any spurious
failures.
The rollback_003_pos.ksh test case exposes a real issue with the
long standing code which needs to be investigated. Regardless,
it has been enable with a small workaround in the test case itself.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9587Closes#9592
If zp->z_unlinked is set, we're working with a znode that has been
marked for deletion. If that's the case, we can skip the "goto again"
loop and return ENOENT, as the znode should not be discovered.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Heitor Alves de Siqueira <halves@canonical.com>
Closes#9583
blkg_tryget() as shipped in EL8 kernels does not seem to handle NULL
@blkg as input; this is different from its mainline counterpart where
NULL is accepted. To prevent dereferencing a NULL pointer when dealing
with block devices which do not set a root_blkg on the request queue
perform the NULL check in vdev_bio_associate_blkg().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#9546Closes#9577
Check for __GFP_RECLAIM instead of GFP_KERNEL because zfs modifies
IO and FS flags which breaks the check for GFP_KERNEL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#9034
This adds a new KMC_KVMEM flag was added to enforce use of the
kvmalloc allocator in kmem_cache_create even for large blocks, which
may also increase performance in some specific cases (e.g. zstd), too.
Default to KVMEM instead of VMEM in spl_kmem_cache_create.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#9034
This patch implements use of kvmalloc for GFP_KERNEL allocations, which
may increase performance if the allocator is able to allocate physical
memory, if kvmalloc is available as a public kernel interface (since
v4.12). Otherwise it will simply fall back to virtual memory (vmalloc).
Also fix vmem_alloc implementation which can lead to slow allocations
since the first attempt with kmalloc does not make use of the noretry
flag but tells the linux kernel to retry several times before it fails.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#9034
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#9034
Increase the minimum supported kernel version from 2.6.32 to 3.10.
This removes support for the following Linux enterprise distributions.
Distribution | Kernel | End of Life
---------------- | ------ | -------------
Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017
SLES 11 | 3.0 | Mar 32, 2019
RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020
The following changes were made as part of removing support.
* Updated `configure` to enforce a minimum kernel version as
specified in the META file (Linux-Minimum: 3.10).
configure: error:
*** Cannot build against kernel version 2.6.32.
*** The minimum supported kernel version is 3.10.
* Removed all `configure` kABI checks and matching C code for
interfaces which solely predate the Linux 3.10 kernel.
* Updated all `configure` kABI checks to fail when an interface is
missing which was in the 3.10 kernel up to the latest 5.1 kernel.
Removed the HAVE_* preprocessor defines for these checks and
updated the code to unconditionally use the verified interface.
* Inverted the detection logic in several kABI checks to match
the new interface as it appears in 3.10 and newer and not the
legacy interface.
* Consolidated the following checks in to individual files. Due
the large number of changes in the checks it made sense to handle
this now. It would be desirable to group other related checks in
the same fashion, but this as left as future work.
- config/kernel-blkdev.m4 - Block device kABI checks
- config/kernel-blk-queue.m4 - Block queue kABI checks
- config/kernel-bio.m4 - Bio interface kABI checks
* Removed the kABI checks for sops->nr_cached_objects() and
sops->free_cached_objects(). These interfaces are currently unused.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9566
This patch removes the need for zpl_revalidate altogether.
There were 3 main reasons why we used d_revalidate:
1. periodic automounted snapshots umount deferral
2. negative dentries created before snapshot rollback
3. stale inodes referenced by dentry cache after snapshot rollback
Periodic snapshots deferral solution introduces zfs_exit_fs function,
which is called as a part of ZFS_EXIT(zfsvfs_t) macro.
Negative dentries and stale inodes are solved by flushing the dcache
for the particular dataset on zfs_resume_fs call.
This patch also removes now unused HAVE_S_D_OP configure test.
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes#8774Closes#9549
Before my ZIL space optimization few years ago 128KB writes were logged
as two 64KB+ records in two 128KB log blocks. After that change it
became ~127KB+/1KB+ in two 128KB log blocks to free space in the second
block for another record. Unfortunately in case of 128KB only writes,
when space in the second block remained unused, that change increased
write latency by unbalancing checksum computation and write times
between parallel threads. It also didn't help with SLOG space
efficiency in that case.
This change introduces new 68KB log block size, used for both writes
below 67KB and 128KB-sharp writes. Writes of 68-127KB are still using
one 128KB block to not increase processing overhead. Writes above
131KB are still using full 128KB blocks, since possible saving there
is small. Mixed loads will likely also fall back to previous 128KB,
since code uses maximum of the last 16 requested block sizes.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#9409
This adds basic support for RISC-V, specifically RV64G.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes#9540
Some of the znode fields are different and functions
consuming an inode don't exist on FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9536
This change modifies some of the infrastructure for enabling the use of
the DTRACE_PROBE* macros, such that we can use tehm in the "spl" module.
Currently, when the DTRACE_PROBE* macros are used, they get expanded to
create new functions, and these dynamically generated functions become
part of the "zfs" module.
Since the "spl" module does not depend on the "zfs" module, the use of
DTRACE_PROBE* in the "spl" module would result in undefined symbols
being used in the "spl" module. Specifically, DTRACE_PROBE* would turn
into a function call, and the function being called would be a symbol
only contained in the "zfs" module; which results in a linker and/or
runtime error.
Thus, this change adds the necessary logic to the "spl" module, to
mirror the tracing functionality available to the "zfs" module. After
this change, we'll have a "trace_zfs.h" header file which defines the
probes available only to the "zfs" module, and a "trace_spl.h" header
file which defines the probes available only to the "spl" module.
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes#9525
MODULE_VERSION is already defined on FreeBSD. Wrap all of the
used MODULE_* macros for the sake of consistency and portability.
Add a user space noop version to reduce the need for _KERNEL ifdefs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9542
A struct rangelock already exists on FreeBSD. Add a zfs_ prefix as
per our convention to prevent any conflict with existing symbols.
This change is a follow up to 2cc479d0.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9534
- ROTATE_LEFT is not used by amd64, move it down within
the scope it's used to silence a clang warning.
- __unused is an alias for the compiler annotation
__attribute__((__unused__)) on FreeBSD. Rename the
field to ____unused.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9538
The FreeBSD implementation can fail, allow this function to
fail and add the required error handling for Linux.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9541
Address two prototype related warnings emitted by clang.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9535
Move these Linux module parameter get/set helpers in to
platform specific code.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9457
It is much faster than AVX512F when byteswapping on Skylake-SP
and newer, as we can do the byteswap in a single vshufb instead
of many instructions.
Reviewed by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#9517
Currently, when you call 'zfs change-key' on an encrypted dataset
that has an unencrypted child, the code will trigger a VERIFY.
This VERIFY is leftover from before we allowed unencrypted
datasets to exist underneath encrypted ones. This patch fixes the
issue by simply replacing the VERIFY with an early return when
recursing through datasets.
Reviewed by: Jason King <jason.brian.king@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9524
- FreeBSD's rootpool import code uses spa_config_parse
- Move the zvol_create_minors call out from under the
spa_namespace_lock in spa_import. It isn't needed and it causes
a lock order reversal on FreeBSD.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9499
This change leverage module_param_call() to run arc_tuning_update()
immediately after the ARC tunable has been updated as suggested in
cffa8372 code review.
A simple test case is added to the ZFS Test Suite to prevent future
regressions in functionality.
Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#9487Closes#9489
This assert makes non portable assumptions about the state of memory
returned by the memory allocator.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9506
This logic is not platform dependent and should reside in the
common code.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9505
It's mostly a noop on ZoL and it conflicts with platforms that
support dtrace. Remove this header to resolve the conflict.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9497
Contrary to initial testing we cannot rely on these kernels to
invalidate the per-cpu FPU state and restore the FPU registers.
Nor can we guarantee that the kernel won't modify the FPU state
which we saved in the task struck.
Therefore, the kfpu_begin() and kfpu_end() functions have been
updated to save and restore the FPU state using our own dedicated
per-cpu FPU state variables.
This has the additional advantage of allowing us to use the FPU
again in user threads. So we remove the code which was added to
use task queues to ensure some functions ran in kernel threads.
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #9346Closes#9403
Fixes an obvious issue of calling arc_buf_destroy() on an
unallocated arc_buf.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#9453
Currently, for certain sizes and classes of allocations we use
SPL caches that are backed by caches in the Linux Slab allocator
to reduce fragmentation and increase utilization of memory. The
way things are implemented for these caches as of now though is
that we don't keep any statistics of the allocations that we
make from these caches.
This patch enables the tracking of allocated objects in those
SPL caches by making the trade-off of grabbing the cache lock
at every object allocation and free to update the respective
counter.
Additionally, this patch makes those caches visible in the
/proc/spl/kmem/slab special file.
As a side note, enabling the specific counter for those caches
enables SDB to create a more user-friendly interface than
/proc/spl/kmem/slab that can also cross-reference data from
slabinfo. Here is for example the output of one of those
caches in SDB that outputs the name of the underlying Linux
cache, the memory of SPL objects allocated in that cache,
and the percentage of those objects compared to all the
objects in it:
```
> spl_kmem_caches | filter obj.skc_name == "zio_buf_512" | pp
name ... source total_memory util
----------- ... ----------------- ------------ ----
zio_buf_512 ... kmalloc-512[SLUB] 16.9MB 8
```
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#9474
Factor Linux specific memory pressure handling out of ARC. Each
platform will have different available interfaces for managing memory
pressure.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9472
Only pass the file descriptor to make zfsdev_get_miror() portable.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9466
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9465
Some platforms, e.g. FreeBSD, support user space setjmp
semantics in kernel.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9450
Clang will complain if a function has no prior declaration
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9467
This addresses a number of problems with dmu_send.c:
* bp_span is unused which makes clang complain
* dump_write conflicts with FreeBSD's existing core dump code
* range_alloc is private to the file and not declared in any headers
causing clang to complain
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9432
We get the sizeof the appropriate type, and don't cast away const.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#9455
FreeBSD has a very different implementation.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9442
FreeBSD has its own implementation as do other platforms.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9439
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#9452
Rename certain functions for more consistency when they share common
features. Make comments clearer about what arguments should be passed
to the insert and add functions.
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#9441
It is no longer necessary; mod_compat.h is included from zfs_context.h.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9449
FreeBSD uses this in its pager ops routines
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9431
When "feature@allocation_classes" is not enabled on the pool no vdev
with "special" or "dedup" allocation type should be allowed to exist in
the vdev tree.
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#9427Closes#9429
Temporary property handling at the VFS layer requires
platform specific code.
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9401
Make the metaslab platform agnostic again by adding
accessor functions which can be implemented by each
platform.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9404
FreeBSD's zvol platform code requires access to the
zil_async_to_sync() function.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9440
In the FreeBSD kernel the strdup signature is:
```
char *strdup(const char *__restrict, struct malloc_type *);
```
It's unfortunate that the developers have chosen to change
the signature of libc functions - but it's what I have to
deal with.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9433
The macros are used to generate code for conditions without a
corresponding branch. This is not a problem in practice, but
clang has no way of knowing that. Add a default branch with a
VERIFY(0) to indicate that it "can't happen"
```
In file included from \
/usr/home/mmacy/devel/ZoF/module/zfs/vdev_raidz_math_sse2.c:607:
/usr/home/mmacy/devel/ZoF/module/zfs/vdev_raidz_math_impl.h:281:3: \
error: no case matching constant switch condition '3' [-Werror]
```
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9434
This patch implements a new tree structure for ZFS, and uses it to
store range trees more efficiently.
The new structure is approximately a B-tree, though there are some
small differences from the usual characterizations. The tree has core
nodes and leaf nodes; each contain data elements, which the elements
in the core nodes acting as separators between its children. The
difference between core and leaf nodes is that the core nodes have an
array of children, while leaf nodes don't. Every node in the tree may
be only partially full; in most cases, they are all at least 50% full
(in terms of element count) except for the root node, which can be
less full. Underfull nodes will steal from their neighbors or merge to
remain full enough, while overfull nodes will split in two. The data
elements are contained in tree-controlled buffers; they are copied
into these on insertion, and overwritten on deletion. This means that
the elements are not independently allocated, which reduces overhead,
but also means they can't be shared between trees (and also that
pointers to them are only valid until a side-effectful tree operation
occurs). The overhead varies based on how dense the tree is, but is
usually on the order of about 50% of the element size; the per-node
overheads are very small, and so don't make a significant difference.
The trees can accept arbitrary records; they accept a size and a
comparator to allow them to be used for a variety of purposes.
The new trees replace the AVL trees used in the range trees today.
Currently, the range_seg_t structure contains three 8 byte integers
of payload and two 24 byte avl_tree_node_ts to handle its storage in
both an offset-sorted tree and a size-sorted tree (total size: 64
bytes). In the new model, the range seg structures are usually two 4
byte integers, but a separate one needs to exist for the size-sorted
and offset-sorted tree. Between the raw size, the 50% overhead, and
the double storage, the new btrees are expected to use 8*1.5*2 = 24
bytes per record, or 33.3% as much memory as the AVL trees (this is
for the purposes of storing metaslab range trees; for other purposes,
like scrubs, they use ~50% as much memory).
We reduced the size of the payload in the range segments by teaching
range trees about starting offsets and shifts; since metaslabs have a
fixed starting offset, and they all operate in terms of disk sectors,
we can store the ranges using 4-byte integers as long as the size of
the metaslab divided by the sector size is less than 2^32. For 512-byte
sectors, this is a 2^41 (or 2TB) metaslab, which with the default
settings corresponds to a 256PB disk. 4k sector disks can handle
metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not
anticipate disks of this size in the near future, there should be
almost no cases where metaslabs need 64-byte integers to store their
ranges. We do still have the capability to store 64-byte integer ranges
to account for cases where we are storing per-vdev (or per-dnode) trees,
which could reasonably go above the limits discussed. We also do not
store fill information in the compact version of the node, since it
is only used for sorted scrub.
We also optimized the metaslab loading process in various other ways
to offset some inefficiencies in the btree model. While individual
operations (find, insert, remove_from) are faster for the btree than
they are for the avl tree, remove usually requires a find operation,
while in the AVL tree model the element itself suffices. Some clever
changes actually caused an overall speedup in metaslab loading; we use
approximately 40% less cpu to load metaslabs in our tests on Illumos.
Another memory and performance optimization was achieved by changing
what is stored in the size-sorted trees. When a disk is heavily
fragmented, the df algorithm used by default in ZFS will almost always
find a number of small regions in its initial cursor-based search; it
will usually only fall back to the size-sorted tree to find larger
regions. If we increase the size of the cursor-based search slightly,
and don't store segments that are smaller than a tunable size floor
in the size-sorted tree, we can further cut memory usage down to
below 20% of what the AVL trees store. This also results in further
reductions in CPU time spent loading metaslabs.
The 16KiB size floor was chosen because it results in substantial memory
usage reduction while not usually resulting in situations where we can't
find an appropriate chunk with the cursor and are forced to use an
oversized chunk from the size-sorted tree. In addition, even if we do
have to use an oversized chunk from the size-sorted tree, the chunk
would be too small to use for ZIL allocations, so it isn't as big of a
loss as it might otherwise be. And often, more small allocations will
follow the initial one, and the cursor search will now find the
remainder of the chunk we didn't use all of and use it for subsequent
allocations. Practical testing has shown little or no change in
fragmentation as a result of this change.
If the size-sorted tree becomes empty while the offset sorted one still
has entries, it will load all the entries from the offset sorted tree
and disregard the size floor until it is unloaded again. This operation
occurs rarely with the default setting, only on incredibly thoroughly
fragmented pools.
There are some other small changes to zdb to teach it to handle btrees,
but nothing major.
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sebastien Roy seb@delphix.com
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#9181
If stdin if empty - don't run xargs command,
otherwise we can get `cp: missing file operand`
error.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#9418
Commit 093bb64 resolved an automount failures for chroot'd processes
but inadvertently broke automounting for root filesystems where the
vfs_mntpoint is NULL. Resolve the issue by checking for NULL in order
to generate the correct path.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9381Closes#9384
A rangelock KPI already exists on FreeBSD. Add a zfs_ prefix as
per our convention to prevent any conflict with existing symbols.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9402
Make arc_stats visible to platform code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9386
We've seen cases where after creating a ZVOL, the ZVOL device node in
"/dev" isn't generated after 20 seconds of waiting, which is the point
at which our applications gives up on waiting and reports an error.
The workload when this occurs is to "refresh" 400+ ZVOLs roughly at the
same time, based on a policy set by the user. This refresh operation
will destroy the ZVOL, and re-create it based on a snapshot.
When this occurs, we see many hundreds of entries on the "z_zvol" taskq
(based on inspection of the /proc/spl/taskq-all file). Many of the
entries on the taskq end up in the "zvol_remove_minors_impl" function,
and I've measured the latency of that function:
Function = zvol_remove_minors_impl
msecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 1 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 1 | |
128 -> 255 : 45 |****************************************|
256 -> 511 : 5 |**** |
That data is from a 10 second sample, using the BCC "funclatency" tool.
As we can see, in this 10 second sample, most calls took 128ms at a
minimum. Thus, some basic math tells us that in any 20 second interval,
we could only process at most about 150 removals, which is much less
than the 400+ that'll occur based on the workload.
As a result of this, and since all ZVOL minor operations will go through
the single threaded "z_zvol" taskq, the latency for creating a single
ZVOL device can be unreasonably large due to other ZVOL activity on the
system. In our case, it's large enough to cause the application to
generate an error and fail the operation.
When profiling the "zvol_remove_minors_impl" function, I saw that most
of the time in the function was spent off-cpu, blocked in the function
"taskq_wait_outstanding". How this works, is "zvol_remove_minors_impl"
will dispatch calls to "zvol_free" using the "system_taskq", and then
the "taskq_wait_outstanding" function is used to wait for all of those
dispatched calls to occur before "zvol_remove_minors_impl" will return.
As far as I can tell, "zvol_remove_minors_impl" doesn't necessarily have
to wait for all calls to "zvol_free" to occur before it returns. Thus,
this change removes the call to "taskq_wait_oustanding", so that calls
to "zvol_free" don't affect the latency of "zvol_remove_minors_impl".
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes#9380
Refactor the zfs ioctls in to platform dependent and independent bits.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Signed-off-by: Matthew Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#9301
Originally the zfs_vdev_elevator module option was added as a
convenience so the requested elevator would be automatically set
on the underlying block devices. At the time this was simple
because the kernel provided an API function which did exactly this.
This API was then removed in the Linux 4.12 kernel which prompted
us to add compatibly code to set the elevator via a usermodehelper.
While well intentioned this introduced a bug which could cause a
system hang, that issue was subsequently fixed by commit 2a0d4188.
In order to avoid future bugs in this area, and to simplify the code,
this functionality is being deprecated. A console warning has been
added to notify any existing consumers and the documentation updated
accordingly. This option will remain for the lifetime of the 0.8.x
series for compatibility but if planned to be phased out of master.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8664Closes#9317
Refactor the zvol in to platform dependent and independent bits.
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9295
Trying to 'zfs diff' a snapshot with large dnodes will incorrectly try
to access its interior slots when dnodesize > sizeof(dnode_phys_t).
This is normally not an issue because the interior slots are
zero-filled, which report_dnode() handles calling
report_free_dnode_range(). However this is not the case for encrypted
large dnodes or filesystem using many SA based xattrs where the extra
data past the legacy dnode size boundary is interpreted as a
dnode_phys_t.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7678Closes#8931Closes#9343
When a disk is replaced with another on a pool with the resilver_defer
feature present, but not enabled the resilver activity restarts during
each spa_sync. This patch checks to make sure that the resilver_defer
feature is first enabled before requesting a deferred resilver.
This was originally fixed in illumos-joyent as OS-7982.
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Signed-off-by: Kody A Kantor <kody@kkantor.com>
External-issue: illumos-joyent OS-7982
Closes#9299Closes#9338
The was incorrect with respect to swapping dataset IDs both in the
on-disk ZAP object and the in-memory queue.
In both cases, if ds1 was already present, then it would be first
replaced with ds2 and then ds would be replaced back with ds1.
Also, both cases did not properly handle a situation where both ds1 and
ds2 are already queued. A duplicate insertion would be attempted and
its failure would result in a panic.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes#9140Closes#9163
This commit fixes a NULL pointer dereference triggered in
spa_vdev_remove_top_check() by trying to "zpool remove" an indirect
vdev.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#9327
This commit fixes the following build failure detected on Debian9
(GCC 6.3.0):
CC [M] module/zfs/spa.o
module/zfs/spa.c: In function ‘spa_wait_common.part.31’:
module/zfs/spa.c:9468:6: error: ‘in_progress’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (!in_progress || spa->spa_waiters_cancel || error)
^
cc1: all warnings being treated as errors
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#9326
Currently, spa_keystore_change_key_sync_impl() does not recurse
into clones when updating encryption roots for either a call to
'zfs promote' or 'zfs change-key'. This can cause children of
these clones to end up in a state where they point to the wrong
dataset as the encryption root. It can also trigger ASSERTs in
some cases where the code checks reference counts on wrapping
keys. This patch fixes this issue by ensuring that this function
properly recurses into clones during processing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9267Closes#9294
Originally the zfs_vdev_elevator module option was added as a
convenience so the requested elevator would be automatically set
on the underlying block devices. At the time this was simple
because the kernel provided an API function which did exactly this.
This API was then removed in the Linux 4.12 kernel which prompted
us to add compatibly code to set the elevator via a usermodehelper.
Unfortunately changing the evelator via usermodehelper requires reading
some userland binaries, most notably modprobe(8) or sh(1), from a zfs
dataset on systems with root-on-zfs. This can deadlock the system if
used during the following call path because it may need, if the data
is not already cached in the ARC, reading directly from disk while
holding the spa config lock as a writer:
zfs_ioc_pool_scan()
-> spa_scan()
-> spa_scan()
-> vdev_reopen()
-> vdev_elevator_switch()
-> call_usermodehelper()
While the usermodehelper waits sh(1), modprobe(8) is blocked in the
ZIO pipeline trying to read from disk:
INFO: task modprobe:2650 blocked for more than 10 seconds.
Tainted: P OE 5.2.14
modprobe D 0 2650 206 0x00000000
Call Trace:
? __schedule+0x244/0x5f0
schedule+0x2f/0xa0
cv_wait_common+0x156/0x290 [spl]
? do_wait_intr_irq+0xb0/0xb0
spa_config_enter+0x13b/0x1e0 [zfs]
zio_vdev_io_start+0x51d/0x590 [zfs]
? tsd_get_by_thread+0x3b/0x80 [spl]
zio_nowait+0x142/0x2f0 [zfs]
arc_read+0xb2d/0x19d0 [zfs]
...
zpl_iter_read+0xfa/0x170 [zfs]
new_sync_read+0x124/0x1b0
vfs_read+0x91/0x140
ksys_read+0x59/0xd0
do_syscall_64+0x4f/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This commit changes how we use the usermodehelper functionality from
synchronous (UMH_WAIT_PROC) to asynchronous (UMH_NO_WAIT) which prevents
scrubs, and other vdev_elevator_switch() consumers, from triggering the
aforementioned issue.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Issue #8664Closes#9321
Currently the best way to wait for the completion of a long-running
operation in a pool, like a scrub or device removal, is to poll 'zpool
status' and parse its output, which is neither efficient nor convenient.
This change adds a 'wait' subcommand to the zpool command. When invoked,
'zpool wait' will block until a specified type of background activity
completes. Currently, this subcommand can wait for any of the following:
- Scrubs or resilvers to complete
- Devices to initialized
- Devices to be replaced
- Devices to be removed
- Checkpoints to be discarded
- Background freeing to complete
For example, a scrub that is in progress could be waited for by running
zpool wait -t scrub <pool>
This also adds a -w flag to the attach, checkpoint, initialize, replace,
remove, and scrub subcommands. When used, this flag makes the operations
kicked off by these subcommands synchronous instead of asynchronous.
This functionality is implemented using a new ioctl. The type of
activity to wait for is provided as input to the ioctl, and the ioctl
blocks until all activity of that type has completed. An ioctl was used
over other methods of kernel-userspace communiction primarily for the
sake of portability.
Porting Notes:
This is ported from Delphix OS change DLPX-44432. The following changes
were made while porting:
- Added ZoL-style ioctl input declaration.
- Reorganized error handling in zpool_initialize in libzfs to integrate
better with changes made for TRIM support.
- Fixed check for whether a checkpoint discard is in progress.
Previously it also waited if the pool had a checkpoint, instead of
just if a checkpoint was being discarded.
- Exposed zfs_initialize_chunk_size as a ZoL-style tunable.
- Updated more existing tests to make use of new 'zpool wait'
functionality, tests that don't exist in Delphix OS.
- Used existing ZoL tunable zfs_scan_suspend_progress, together with
zinject, in place of a new tunable zfs_scan_max_blks_per_txg.
- Added support for a non-integral interval argument to zpool wait.
Future work:
ZoL has support for trimming devices, which Delphix OS does not. In the
future, 'zpool wait' could be extended to add the ability to wait for
trim operations to complete.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes#9162
1. Fix issue: Kernel BUG with QAT during decompression #9276.
Now it is uninterruptible for a specific given QAT request,
but Ctrl-C interrupt still works in user-space process.
2. Copy the digest result to the buffer only when doing encryption,
and vise-versa for decryption.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chengfei Zhu <chengfeix.zhu@intel.com>
Closes#9276Closes#9303
objnode is OS agnostic and used only by dmu_redact.c.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9315
Move Linux specific tracing headers and source to platform directories
and update the build system.
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9290
Currently, the DSL scan code figures out when it should suspend
processing and allow a txg to continue by calling the function
dsl_scan_check_suspend(). Unfortunately, this function only
allows the scan to suspend at a level 0 block. In the event that
the system is scanning a bunch of empty snapshots or a resilver
is running with a high enough scn_cur_min_txg, the scan will
stop processing each dataset at the root level, deciding it
has nothing left to do. This means that the check_suspend
function is never called and the txg remains stuck until a
dataset is found that has data to scan.
This patch fixes the problem by allowing scans to suspend at
the root level of the objset. For backwards compatibility, we
use the bookmark <objsetid, 0, 0, 0> when we suspend here so
that older versions of the code will work as intended.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9300
Accidentally introduced by dc04a8c which now takes the SCL_VDEV lock
as a reader in zfs_blkptr_verify(). A deadlock can occur if the
/etc/hostid file resides on a dataset in the same pool. This is
because reading the /etc/hostid file may occur while the caller is
holding the SCL_VDEV lock as a writer. For example, to perform a
`zpool attach` as shown in the abbreviated stack below.
To resolve the issue we cache the system's hostid when initializing
the spa_t, or when modifying the multihost property. The cached
value is then relied upon for subsequent accesses.
Call Trace:
spa_config_enter+0x1e8/0x350 [zfs]
zfs_blkptr_verify+0x33c/0x4f0 [zfs] <--- trying read lock
zio_read+0x6c/0x140 [zfs]
...
vfs_read+0xfc/0x1e0
kernel_read+0x50/0x90
...
spa_get_hostid+0x1c/0x38 [zfs]
spa_config_generate+0x1a0/0x610 [zfs]
vdev_label_init+0xa0/0xc80 [zfs]
vdev_create+0x98/0xe0 [zfs]
spa_vdev_attach+0x14c/0xb40 [zfs] <--- grabbed write lock
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9256Closes#9285
When adding the SIMD compatibility code in e5db313 the decryption of a
dataset wrapping key was left in a user thread context. This was done
intentionally since it's a relatively infrequent operation. However,
this also meant that the encryption context templates were initialized
using the generic operations. Therefore, subsequent encryption and
decryption operations would use the generic implementation even when
executed by an I/O pipeline thread.
Resolve the issue by initializing the context templates in an I/O
pipeline thread. And by updating zio_do_crypt_uio() to dispatch any
encryption operations to a pipeline thread when called from the user
context. For example, when performing a read from the ARC.
Tested-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9215Closes#9296
Move platform specific Linux source under module/os/linux/
and update the build system accordingly. Additional code
restructuring will follow to make the common code fully
portable.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Macy <mmacy@FreeBSD.org>
Closes#9206
Adds ZFS_MODULE_PARAM to abstract module parameter
setting to operating systems other than Linux.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#9230
`metaslab_verify_weight_and_frag()` a verification function and
by the end of it there shouldn't be any side-effects.
The function calls `metaslab_weight()` which in turn calls
`metaslab_set_fragmentation()`. The latter can dirty and otherwise
not dirty metaslab fro the next TXGand set `metaslab_condense_wanted`
if the spacemaps were just upgraded (meaning we just enabled the
SPACEMAP_HISTOGRAM feature through upgrade).
This patch adds a new flag as a parameter to `metaslab_weight()` and
`metaslab_set_fragmentation()` making the dirtying of the metaslab
optional.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#9185Closes#9282
Move platform specific Linux headers under include/os/linux/.
Update the build system accordingly to detect the platform.
This lays some of the initial groundwork to supporting building
for other platforms.
As part of this change it was necessary to create both a user
and kernel space sys/simd.h header which can be included in
either context. No functional change, the source has been
refactored and the relevant #include's updated.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Matthew Macy <mmacy@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9198
Account for ZFS_MAX_DATASET_NAME_LEN in kstat data size. This value
is ignored in the Linux kstat code but resolves the issue for other
platforms.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Igor Kozhukhov <igor@dilos.org>
Closes#9254Closes#9151
This fixes a hole in the situation where the resume state is left from
receiving a new dataset and, so, the state is set on the dataset itself
(as opposed to %recv child).
Additionally, distinguish incremental and resume streams in error
messages.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes#9252
This change use the compat code introduced in 9cc1844a.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#9268Closes#9269
When running on larger memory systems, we can overflow the value of
maxinflight. This can result in maxinflight having a value of 0 causing
the system to hang.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <george.wilson@delphix.com>
Closes#9272
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes#9240
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes#9241
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes#9239
If a pool enables the SPACEMAP_HISTOGRAM feature shortly before being
exported, we can enter a situation that causes a kernel panic. Any metaslabs
that are loaded during the final dirty txg and haven't already been condensed
will cause metaslab_sync to proceed after the final dirty txg so that the
condense can be performed, which there are assertions to prevent. Because of
the nature of this issue, there are a number of ways we can enter this
state. Rather than try to prevent each of them one by one, potentially missing
some edge cases, we instead cut it off at the point of intersection; by
preventing metaslab_sync from proceeding if it would only do so to perform a
condense and we're past the final dirty txg, we preserve the utility of the
existing asserts while preventing this particular issue.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#9185Closes#9186Closes#9231Closes#9253
With the other metaslab changes loaded onto a system, we can
significantly reduce the memory usage of each loaded metaslab and
unload them on demand if there is memory pressure. However, none
of those changes actually result in us keeping more metaslabs loaded.
If we don't keep more metaslabs loaded, we will still have to wait
for demand-loading to finish when no loaded metaslab can satisfy our
allocation, which can cause ZIL performance issues. In addition,
performance is traditionally measured by IOs per unit time, while
unloading is currently done on a txg-count basis. Txgs can take a
widely varying range of times, from tenths of a second to several
seconds. This can result in confusing, hard to predict behavior.
This change simply adds a time-based component to metaslab unloading.
A metaslab will remain loaded for one minute and 8 txgs (by default)
after it was last used, unless it is evicted due to memory pressure.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
External-issue: DLPX-65016
External-issue: DLPX-65047
Closes#9197
For interrupt coalescing, cv_timedwait_hires() uses a 100us slack/delta
for calls to schedule_hrtimeout_range(). This 100us slack can be costly
for small writes.
This change improves small write performance by passing resolution `res`
parameter to schedule_hrtimeout_range() to be used as delta/slack. A new
tunable `spl_schedule_hrtimeout_slack_us` is added to preserve old
behavior when desired.
Performance observations on 8K recordsize filesystem:
- 8K random writes at 1-64 threads, up to 60% improvement for one thread
and smaller gains as thread count increases. At >64 threads, 2-5%
decrease in performance was observed.
- 8K sequential writes, similar 60% improvement for one thread and
leveling out around 64 threads. At >64 threads, 5-10% decrease in
performance was observed.
- 128K sequential write sees 1-5 for the 128K. No observed regression at
high thread count.
Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on
VMware ESX.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com>
Closes#9217
Tag the ABD data pages so that they can be identified for exclusion
from kernel crash dumps. Eliminating the zfs file data allows for
significantly smaller crash dump files. Note that ZFS in illumos has
always excluded the zfs data pages from a kernel crash dump.
This change tags ARC scatter data pages so they can be identified from
the makedumpfile(8) command. That command is used to create smaller
dump files by ignoring some memory regions and using compression. It
already filters file data from the VFS page cache and will now be able
to exclude ZFS file data pages from the dump file.
A corresponding change to makeumpfile(8) is required to identify ZFS
data pages.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#8899
If TX_REMOVE is followed by TX_CREATE on the same object id, we need to
make sure the object removal is completely finished before creation. The
current implementation relies on dnode_hold_impl with
DNODE_MUST_BE_ALLOCATED returning ENOENT. While this check seems to work
fine before, in current version it does not guarantee the object removal
is completed.
We fix this by checking if DNODE_MUST_BE_FREE returns successful
instead. Also add test and remove dead code in dnode_hold_impl.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#7151Closes#8910Closes#9123Closes#9145
Previously, the permissions were checked on the pool which was obviously
incorrect.
After this change, zfs_check_userprops() only validates the properties
without any permission checks. The permissions are checked individually
for each snapshotted dataset.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes#9179Closes#9180
Currently, the 'zfs rollback' code can end up deadlocked due to
the way the kernel handles unreferenced inodes on a suspended fs.
Essentially, the zfs_resume_fs() code path may cause zfs to spawn
new threads as it reinstantiates the suspended fs's zil. When a
new thread is spawned, the kernel may attempt to free memory for
that thread by freeing some unreferenced inodes. If it happens to
select inodes that are a a part of the suspended fs a deadlock
will occur because freeing inodes requires holding the fs's
z_teardown_inactive_lock which is still held from the suspend.
This patch corrects this issue by adding an additional reference
to all inodes that are still present when a suspend is initiated.
This prevents them from being freed by the kernel for any reason.
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9203
Fix some switch() fall-though compiler errors:
abd.c:1504:9: error: this statement may fall through
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#9170
When there are many snapshots, calls to zfs_ioc_space_snaps() (e.g. from
`zfs destroy -nv pool/fs@snap1%snap10000`) can be very slow, resulting
in poor performance because we are holding the dp_config_rwlock the
entire time, blocking spa_sync() from continuing. With around ten
thousand snapshots, we've seen up to 500 seconds in this ioctl,
iterating over up to 50,000,000 bpobjs, ~99% of which are the empty
bpobj.
By creating a fast path for zfs_ioc_space_snaps() handling of the
empty_bpobj, we can achieve a ~5x performance improvement of this ioctl
(when there are many snapshots, and the deadlist is mostly
empty_bpobj's).
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-58348
Closes#8744
There are two different deadlock scenarios, but they share a common
link, which is
thread 1 holding sa_lock and trying to get zap->zap_rwlock:
zap_lockdir_impl+0x858/0x16c0 [zfs]
zap_lockdir+0xd2/0x100 [zfs]
zap_lookup_norm+0x7f/0x100 [zfs]
zap_lookup+0x12/0x20 [zfs]
sa_setup+0x902/0x1380 [zfs]
zfsvfs_init+0x3d6/0xb20 [zfs]
zfsvfs_create+0x5dd/0x900 [zfs]
zfs_domount+0xa3/0xe20 [zfs]
and thread 2 trying to get sa_lock, either in sa_setup:
sa_setup+0x742/0x1380 [zfs]
zfsvfs_init+0x3d6/0xb20 [zfs]
zfsvfs_create+0x5dd/0x900 [zfs]
zfs_domount+0xa3/0xe20 [zfs]
or in sa_build_index:
sa_build_index+0x13d/0x790 [zfs]
sa_handle_get_from_db+0x368/0x500 [zfs]
zfs_znode_sa_init.isra.0+0x24b/0x330 [zfs]
zfs_znode_alloc+0x3da/0x1a40 [zfs]
zfs_zget+0x39a/0x6e0 [zfs]
zfs_root+0x101/0x160 [zfs]
zfs_domount+0x91f/0xea0 [zfs]
From there, there are different locking paths back to something
holding zap->zap_rwlock.
The deadlock scenarios involve multiple different ZFS filesystems
being mounted. sa_lock is common to these scenarios, and the sa
struct involved is private to a mount. Therefore, these must be
referring to different sa_lock instances and these deadlocks can't
occur in practice.
The fix, from Brian Behlendorf, is to remove sa_lock from lockdep
coverage by initializing it with MUTEX_NOLOCKDEP.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jeff Dike <jdike@akamai.com>
Closes#9110
Uses obj-m instead, due to kernel changes.
See LKML: Masahiro Yamada, Tue, 6 Aug 2019 19:03:23 +0900
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Dominic Pearson <dsp@technoanimal.net>
Closes#9169
On systems with large amounts of storage and high fragmentation, a huge
amount of space can be used by storing metaslab range trees. Since
metaslabs are only unloaded during a txg sync, and only if they have
been inactive for 8 txgs, it is possible to get into a state where all
of the system's memory is consumed by range trees and metaslabs, and
txgs cannot sync. While ZFS knows how to evict ARC data when needed,
it has no such mechanism for range tree data. This can result in boot
hangs for some system configurations.
First, we add the ability to unload metaslabs outside of syncing
context. Second, we store a multilist of all loaded metaslabs, sorted
by their selection txg, so we can quickly identify the oldest
metaslabs. We use a multilist to reduce lock contention during heavy
write workloads. Finally, we add logic that will unload a metaslab
when we're loading a new metaslab, if we're using more than a certain
fraction of the available memory on range trees.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#9128
Even though the bug's writeup (Github issue #9136) is very detailed,
we still don't know exactly how we got to that state, thus I wasn't
able to reproduce the bug. That said, we can make an educated guess
combining the information on filled issue with the code.
From the fact that `dp_dirty_total` was 0 (which is less than
`zfs_dirty_data_max`) we know that there was one thread that set it to
0 and then signaled one of the waiters of `dp_spaceavail_cv` [see
`dsl_pool_dirty_delta()` which is also the only place that
`dp_dirty_total` is changed]. Thus, the only logical explaination
then for the bug being hit is that the waiter that just got awaken
didn't go through `dsl_pool_dirty_data()`. Given that this function
is only called by `dsl_pool_dirty_space()` or `dsl_pool_undirty_space()`
I can only think of two possible ways of the above scenario happening:
[1] The waiter didn't call into any of the two functions - which I
find highly unlikely (i.e. why wait on `dp_spaceavail_cv` to begin
with?).
[2] The waiter did call in one of the above function but it passed 0 as
the space/delta to be dirtied (or undirtied) and then the callee
returned immediately (e.g both `dsl_pool_dirty_space()` and
`dsl_pool_undirty_space()` return immediately when space is 0).
In any case and no matter how we got there, the easy fix would be to
just broadcast to all waiters whenever `dp_dirty_total` hits 0. That
said and given that we've never hit this before, it would make sense
to think more on why the above situation occured.
Attempting to mimic what Prakash was doing in the issue filed, I
created a dataset with `sync=always` and started doing contiguous
writes in a file within that dataset. I observed with DTrace that even
though we update the pool's dirty data accounting when we would dirty
stuff, the accounting wouldn't be decremented incrementally as we were
done with the ZIOs of those writes (the reason being that
`dbuf_write_physdone()` isn't be called as we go through the override
code paths, and thus `dsl_pool_undirty_space()` is never called). As a
result we'd have to wait until we get to `dsl_pool_sync()` where we
zero out all dirty data accounting for the pool and the current TXG's
metadata.
In addition, as Matt noted and I later verified, the same issue would
arise when using dedup.
In both cases (sync & dedup) we shouldn't have to wait until
`dsl_pool_sync()` zeros out the accounting data. According to the
comment in that part of the code, the reasons why we do the zeroing,
have nothing to do with what we observe:
````
/*
* We have written all of the accounted dirty data, so our
* dp_space_towrite should now be zero. However, some seldom-used
* code paths do not adhere to this (e.g. dbuf_undirty(), also
* rounding error in dbuf_write_physdone).
* Shore up the accounting of any dirtied space now.
*/
dsl_pool_undirty_space(dp, dp->dp_dirty_pertxg[txg & TXG_MASK], txg);
````
Ideally what we want to do is to undirty in the accounting exactly what
we dirty (I use the word ideally as we can still have rounding errors).
This would make the behavior of the system more clear and predictable.
Another interesting issue that I observed with DTrace was that we
wouldn't update any of the pool's dirty data accounting whenever we
would dirty and/or undirty MOS data. In addition, every time we would
change the size of a dbuf through `dbuf_new_size()` we wouldn't update
the accounted space dirtied in the appropriate dirty record, so when
ZIOs are done we would undirty less that we dirtied from the pool's
accounting point of view.
For the first two issues observed (sync & dedup) this patch ensures
that we still update the pool's accounting when we undirty data,
regardless of the write being physical or not.
For changes in the MOS, we first ensure to zero out the pool's dirty
data accounting in `dsl_pool_sync()` after we synced the MOS. Then we
can go ahead and enable the update of the pool's dirty data accounting
wheneve we change MOS data.
Another fix is that we now update the accounting explicitly for
counting errors in `dbuf_write_done()`.
Finally, `dbuf_new_size()` updates the accounted space of the
appropriate dirty record correctly now.
The problem is that we still don't know how the bug came up in the
issue filled. That said the issues fixed seem to be very relevant, so
instead of going with the broadcasting solution right away,
I decided to leave this patch as is.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
External-issue: DLPX-47285
Closes#9137
In zfs_log_write(), we can use dmu_read_by_dnode() rather than
dmu_read() thus avoiding unnecessary dnode_hold() calls.
We get a 2-5% performance gain for large sequential_writes tests, >=128K
writes to files with recordsize=8K.
Testing done on Ubuntu 18.04 with 4.15 kernel, 8vCPUs and SSD storage on
VMware ESX.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com>
Closes#9156
This patch introduces an assertion that can catch pitfalls in
development where there is a mismatch between the size of
reads and writes between a *_phys structure and its respective
in-core structure when bonus buffers are used.
This debugging-aid should be complementary to the verification
done by ztest in ztest_verify_dnode_bt().
A side to this patch is that we now clear out any extra bytes
past a bonus buffer's new size when the buffer is shrinking.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8348
The call to txg_wait_synced in zfsvfs_teardown should
be made conditional on the objset having dirty data.
This can prevent unnecessary txg_wait_synced during
some unmount operations.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#9115
When we check the vdev of the blkptr in zfs_blkptr_verify, we can run
into a race condition where that vdev is temporarily unavailable. This
happens when a device removal operation and the old vdev_t has been
removed from the array, but the new indirect vdev has not yet been
inserted.
We hold the spa_config_lock while doing our sensitive verification.
To ensure that we don't deadlock, we only grab the lock if we don't
have config_writer held. In addition, I had to const the tags of the
refcounts and the spa_config_lock arguments.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#9112
We should only call zil_remove_async when an object is removed. However,
in current implementation, it is called whenever TX_REMOVE is called. In
the case of hardlinked file, every unlink will generate TX_REMOVE and
causing operations to be dropped even when the object is not removed.
We fix this by only calling zil_remove_async when the file is fully
unlinked.
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#8769Closes#9061
This function is not used outside of dsl_dataset.c
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Closes#9154
When a pool is imported it will scan the pool to verify the integrity
of the data and metadata. The amount it scans will depend on the
import flags provided. On systems with small amounts of memory or
when importing a pool from the crash kernel, it's possible for
spa_load_verify to issue too many I/Os that it consumes all the memory
of the system resulting in an OOM message or a hang.
To prevent this, we limit the amount of memory that the initial pool
scan can consume. This change will, by default, use 1/16th of the ARC
for scan I/Os to prevent running the system out of memory during import.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: George Wilson george.wilson@delphix.com
External-issue: DLPX-65237
External-issue: DLPX-65238
Closes#9146
Given znode_t is an in-core structure, it's more readable to have
them as boolean. Also co-locate existing boolean fields with them
for space efficiency (expecting 8 booleans to be packed/aligned).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#9092
This is not implemented. If it were implemented, using it would risk
deadlocks on pre-3.18 kernels. Lets just drop it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#9119
Consumers of ZFS Channel Programs can now list bookmarks,
and get holds from datasets. A minor-refactoring was also
applied to distinguish between user and system properties
in ZCP.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Ported-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Dan Kimmel <dan.kimmel@delphix.com>
OpenZFS-issue: https://illumos.org/issues/8862Closes#7902
Beside the whole commit being a nit in reality it should
bring the diffs of the spa_log_spacemap.c source file
between ZoL and delphix/zfs to 0.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#9143
When we unload metaslabs today in ZFS, the cached max_size value is
discarded. We instead use the histogram to determine whether or not we
think we can satisfy an allocation from the metaslab. This can result in
situations where, if we're doing I/Os of a size not aligned to a
histogram bucket, a metaslab is loaded even though it cannot satisfy the
allocation we think it can. For example, a metaslab with 16 entries in
the 16k-32k bucket may have entirely 16kB entries. If we try to allocate
a 24kB buffer, we will load that metaslab because we think it should be
able to handle the allocation. Doing so is expensive in CPU time, disk
reads, and average IO latency. This is exacerbated if the write being
attempted is a sync write.
This change makes ZFS cache the max_size after the metaslab is
unloaded. If we ever get a free (or a coalesced group of frees) larger
than the max_size, we will update it. Otherwise, we leave it as is. When
attempting to allocate, we use the max_size as a lower bound, and
respect it unless we are in try_hard. However, we do age the max_size
out at some point, since we expect the actual max_size to increase as we
do more frees. A more sophisticated algorithm here might be helpful, but
this works reasonably well.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#9055
ZED can prevent CPU's from properly sleeping.
Rather than periodically waking up in the zevents code, just go to sleep and wait for a wakeup.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#9091
This fixes a lockdep warning by breaking a link between ->tx_sync_lock
and ->dp_lock.
The deadlock envisioned by lockdep is this:
thread 1 holds db->db_mtx and tries to get dp->dp_lock:
dsl_pool_dirty_space+0x70/0x2d0 [zfs]
dbuf_dirty+0x778/0x31d0 [zfs]
thread 2 holds bpo->bpo_lock and tries to get db->db_mtx:
dmu_buf_will_dirty_impl
dmu_buf_will_dirty+0x6b/0x6c0 [zfs]
bpobj_iterate_impl+0xbe6/0x1410 [zfs]
thread 3 holds tx->tx_sync_lock and tries to get bpo->bpo_lock:
bpobj_space+0x63/0x470 [zfs]
dsl_scan_active+0x340/0x3d0 [zfs]
txg_sync_thread+0x3f2/0x1370 [zfs]
thread 4 holds dp->dp_lock and tries to get tx->tx_sync_lock
txg_kick+0x61/0x420 [zfs]
dsl_pool_need_dirty_delay+0x1c7/0x3f0 [zfs]
This patch is orginally from Brian Behlendorf and slightly simplified
by me.
It breaks this cycle in thread 4 by moving the call from
dsl_pool_need_dirty_delay to txg_kick outside the section controlled
by dp->dp_lock.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Jeff Dike <jdike@akamai.com>
Closes#9094
In spa_ld_log_sm_metadata(), it is possible for zap_cursor_retrieve()
to return errors other than the expected ENOENT (e.g. when we are at
the end of the zap). Ensure that these error cases are handled
correctly by the import path.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#9074
When the log spacemap commit was merged in ZoL, the
metaslab_verify_unflushed_changes() debugging function
was deleted as the feature was pretty much stable by
then. Unfortunately though there was a reference to
it from a comment in metaslab_verify_weight_and_frag().
This patch deletes the reference and pastes that
comment as is.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#9097
In zfs_write() and dmu_tx_hold_sa(), we can use dmu_tx_hold_*_by_dnode()
instead of dmu_tx_hold_*(), since we already have a dbuf from the target
dnode in hand. This eliminates some calls to dnode_hold(), which can be
expensive. This is especially impactful if several threads are
accessing objects that are in the same block of dnodes, because they
will contend for that dbuf's lock.
We are seeing 10-20% performance wins for the sequential_writes tests in
the performance test suite, when doing >=128K writes to files with
recordsize=8K.
This also removes some unnecessary casts that are in the area.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#9081
When adapting the original sources for s390x the JMP_BUF_CNT was
mistakenly halved due to an incorrect assumption of the size of
a unsigned long. They are 8 bytes for the s390x architecture.
Increase JMP_BUF_CNT accordingly.
Authored-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported-by: Colin Ian King <canonical.com>
Tested-by: Colin Ian King <canonical.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8992Closes#9080
Don't unconditionally return 0 (i.e. retain SUID/SGID).
Test CAP_FSETID capability.
https://github.com/pjd/pjdfstest/blob/master/tests/chmod/12.t
which expects SUID/SGID to be dropped on write(2) by non-owner fails
without this. Most filesystems make this decision within VFS by using
a generic file write for fops.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#9035Closes#9043
Deleting a clone requires finding blocks are clone-only, not shared
with the snapshot. This was done by traversing the entire block tree
which results in a large performance penalty for sparsely
written clones.
This is new method keeps track of clone blocks when they are
modified in a "Livelist" so that, when it’s time to delete,
the clone-specific blocks are already at hand.
We see performance improvements because now deletion work is
proportional to the number of clone-modified blocks, not the size
of the original dataset.
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Closes#8416
Cast to uintptr_t first for portability on integer to/from pointer
conversion.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#9065
The rwlock implementation on linux does not perform as well as mutexes.
We can realize a performance benefit by replacing the zf_rwlock with a
mutex. Local microbenchmarks show ~50% improvement, and over NFS we see
~5% improvement on several of the ZFS Performance Tests cases,
especially randwrite and seq_write.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#9062
metaslab_should_allocate() is used in two places:
[1] When trying to select a metaslab to allocate from
[2] When trying to allocate from a metaslab
In [2] we always expect the metaslab to be loaded, and after
the refactoring of the log spacemap changes, whenever we load
a metaslab we set ms_max_size to the biggest range in the
ms_allocatable tree. Thus, when it is used in [2], if that
field is 0, it means that the metaslab doesn't have any
segments that can be used for allocations now (though it may
have some free space but that space can be in the freeing,
freed, or deferred trees).
In [1] a metaslab can be loaded or unloaded at which point 0
can either mean the metaslab doesn't have any space or the
metaslab is just not loaded thus we go ahead and try to make
an estimation based on its weight.
The issue here is when we call the above function for [2] and
the metaslab doesn't have any allocatable space, we still go
ahead and check its ms_weight which may be out of date because
we haven't ran metaslab_sync_done() yet. At that point we are
allowing an allocation to be attempted even though we know
there is no range that is allocatable.
This patch fixes this issue by explicitly checking if the
metaslab is loaded and if it is, the ms_max_size is used.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#9045
In the past we've seen multiple race conditions that have
to do with open-context threads async threads and concurrent
calls to spa_export()/spa_destroy() (including the one
referenced in issue #9015).
This patch ensures that only one thread can execute the
main body of spa_export_common() at a time, with subsequent
threads returning with a new error code created just for
this situation, eliminating this way any race condition
bugs introduced by concurrent calls to this function.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#9015Closes#9044
There exists a race condition were hdr_recl() calls
zthr_wakeup() on a destroyed zthr. The timeline is the
following:
[1] hdr_recl() runs first and goes intro zthr_wakeup()
because arc_initialized is set.
[2] arc_fini() is called by another thread, zeroes
that flag, destroying the zthr, and goes into
buf_init().
[3] hdr_recl() tries to enter the destroyed mutex
and we blow up.
This patch ensures that the ARC's zthrs are not offloaded
any new work once arc_initialized is set and then destroys
them after all of the ARC state has been deleted.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#9047
These aren't tunable; illumos has this comment fixed in
"3742 zfs comments need cleaner, more consistent style",
so sync with that.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#9052
These functions are unused and can be removed along
with the spl-mutex.c and spl-rwlock.c source files.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9029
The Linux kernel's rwsem's have never provided an interface to
allow a reader to be upgraded to a writer. Historically, this
functionality has been implemented by a SPL wrapper function.
However, this approach depends on internal knowledge of the
rw_semaphore and is therefore rather brittle.
Since the ZFS code must always be able to fallback to rw_exit()
and rw_enter() when an rw_tryupgrade() fails; this functionality
isn't critical. Furthermore, the only potentially performance
sensitive consumer is dmu_zfetch() and no decrease in performance
was observed with this change applied. See the PR comments for
additional testing details.
Therefore, it is being retired to make the build more robust and
to simplify the rwlock implementation.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9029
Commit https://github.com/torvalds/linux/commit/94a9717b updated the
rwsem's owner field to contain additional flags describing the rwsem's
state. Rather then update the wrappers to mask out these bits, the
code no longer relies on the owner stored by the kernel. This does
increase the size of a krwlock_t but it makes the implementation
less sensitive to future kernel changes.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9029
lockdep reports a possible recursive lock in dbuf_destroy.
It is true that dbuf_destroy is acquiring the dn_dbufs_mtx
on one dnode while holding it on another dnode. However,
it is impossible for these to be the same dnode because,
among other things,dbuf_destroy checks MUTEX_HELD before
acquiring the mutex.
This fix defines a class NESTED_SINGLE == 1 and changes
that lock to call mutex_enter_nested with a subclass of
NESTED_SINGLE.
In order to make the userspace code compile,
include/sys/zfs_context.h now defines mutex_enter_nested and
NESTED_SINGLE.
This is the lockdep report:
[ 122.950921] ============================================
[ 122.950921] WARNING: possible recursive locking detected
[ 122.950921] 4.19.29-4.19.0-debug-d69edad5368c1166 #1 Tainted: G O
[ 122.950921] --------------------------------------------
[ 122.950921] dbu_evict/1457 is trying to acquire lock:
[ 122.950921] 0000000083e9cbcf (&dn->dn_dbufs_mtx){+.+.}, at: dbuf_destroy+0x3c0/0xdb0 [zfs]
[ 122.950921]
but task is already holding lock:
[ 122.950921] 0000000055523987 (&dn->dn_dbufs_mtx){+.+.}, at: dnode_evict_dbufs+0x90/0x740 [zfs]
[ 122.950921]
other info that might help us debug this:
[ 122.950921] Possible unsafe locking scenario:
[ 122.950921] CPU0
[ 122.950921] ----
[ 122.950921] lock(&dn->dn_dbufs_mtx);
[ 122.950921] lock(&dn->dn_dbufs_mtx);
[ 122.950921]
*** DEADLOCK ***
[ 122.950921] May be due to missing lock nesting notation
[ 122.950921] 1 lock held by dbu_evict/1457:
[ 122.950921] #0: 0000000055523987 (&dn->dn_dbufs_mtx){+.+.}, at: dnode_evict_dbufs+0x90/0x740 [zfs]
[ 122.950921]
stack backtrace:
[ 122.950921] CPU: 0 PID: 1457 Comm: dbu_evict Tainted: G O 4.19.29-4.19.0-debug-d69edad5368c1166 #1
[ 122.950921] Hardware name: Supermicro H8SSL-I2/H8SSL-I2, BIOS 080011 03/13/2009
[ 122.950921] Call Trace:
[ 122.950921] dump_stack+0x91/0xeb
[ 122.950921] __lock_acquire+0x2ca7/0x4f10
[ 122.950921] lock_acquire+0x153/0x330
[ 122.950921] dbuf_destroy+0x3c0/0xdb0 [zfs]
[ 122.950921] dbuf_evict_one+0x1cc/0x3d0 [zfs]
[ 122.950921] dbuf_rele_and_unlock+0xb84/0xd60 [zfs]
[ 122.950921] dnode_evict_dbufs+0x3a6/0x740 [zfs]
[ 122.950921] dmu_objset_evict+0x7a/0x500 [zfs]
[ 122.950921] dsl_dataset_evict_async+0x70/0x480 [zfs]
[ 122.950921] taskq_thread+0x979/0x1480 [spl]
[ 122.950921] kthread+0x2e7/0x3e0
[ 122.950921] ret_from_fork+0x27/0x50
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jeff Dike <jdike@akamai.com>
Closes#8984
Make use of __GFP_HIGHMEM flag in vmem_alloc, which is required for
some 32-bit systems to make use of full available memory.
While kernel versions >=4.12-rc1 add this flag implicitly, older
kernels do not.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#9031
zfs_refcount_*() are to be wrapped by zfsctl_snapshot_*() in this file.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#9039
Resolve an assortment of style inconsistencies including
use of white space, typos, capitalization, and line wrapping.
There is no functional change.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9030
The cast of the size_t returned by strlcpy() to a uint64_t by the
VERIFY3U can result in a build failure when CONFIG_FORTIFY_SOURCE
is set. This is due to the additional hardening. Since the token
is expected to always fit in strval the VERIFY3U has been removed.
If somehow it doesn't, it will still be safely truncated.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8999Closes#9020
= Motivation
At Delphix we've seen a lot of customer systems where fragmentation
is over 75% and random writes take a performance hit because a lot
of time is spend on I/Os that update on-disk space accounting metadata.
Specifically, we seen cases where 20% to 40% of sync time is spend
after sync pass 1 and ~30% of the I/Os on the system is spent updating
spacemaps.
The problem is that these pools have existed long enough that we've
touched almost every metaslab at least once, and random writes
scatter frees across all metaslabs every TXG, thus appending to
their spacemaps and resulting in many I/Os. To give an example,
assuming that every VDEV has 200 metaslabs and our writes fit within
a single spacemap block (generally 4K) we have 200 I/Os. Then if we
assume 2 levels of indirection, we need 400 additional I/Os and
since we are talking about metadata for which we keep 2 extra copies
for redundancy we need to triple that number, leading to a total of
1800 I/Os per VDEV every TXG.
We could try and decrease the number of metaslabs so we have less
I/Os per TXG but then each metaslab would cover a wider range on
disk and thus would take more time to be loaded in memory from disk.
In addition, after it's loaded, it's range tree would consume more
memory.
Another idea would be to just increase the spacemap block size
which would allow us to fit more entries within an I/O block
resulting in fewer I/Os per metaslab and a speedup in loading time.
The problem is still that we don't deal with the number of I/Os
going up as the number of metaslabs is increasing and the fact
is that we generally write a lot to a few metaslabs and a little
to the rest of them. Thus, just increasing the block size would
actually waste bandwidth because we won't be utilizing our bigger
block size.
= About this patch
This patch introduces the Log Spacemap project which provides the
solution to the above problem while taking into account all the
aforementioned tradeoffs. The details on how it achieves that can
be found in the references sections below and in the code (see
Big Theory Statement in spa_log_spacemap.c).
Even though the change is fairly constraint within the metaslab
and lower-level SPA codepaths, there is a side-change that is
user-facing. The change is that VDEV IDs from VDEV holes will no
longer be reused. To give some background and reasoning for this,
when a log device is removed and its VDEV structure was replaced
with a hole (or was compacted; if at the end of the vdev array),
its vdev_id could be reused by devices added after that. Now
with the pool-wide space maps recording the vdev ID, this behavior
can cause problems (e.g. is this entry referring to a segment in
the new vdev or the removed log?). Thus, to simplify things the
ID reuse behavior is gone and now vdev IDs for top-level vdevs
are truly unique within a pool.
= Testing
The illumos implementation of this feature has been used internally
for a year and has been in production for ~6 months. For this patch
specifically there don't seem to be any regressions introduced to
ZTS and I have been running zloop for a week without any related
problems.
= Performance Analysis (Linux Specific)
All performance results and analysis for illumos can be found in
the links of the references. Redoing the same experiments in Linux
gave similar results. Below are the specifics of the Linux run.
After the pool reached stable state the percentage of the time
spent in pass 1 per TXG was 64% on average for the stock bits
while the log spacemap bits stayed at 95% during the experiment
(graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png).
Sync times per TXG were 37.6 seconds on average for the stock
bits and 22.7 seconds for the log spacemap bits (related graph:
sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result
the log spacemap bits were able to push more TXGs, which is also
the reason why all graphs quantified per TXG have more entries for
the log spacemap bits.
Another interesting aspect in terms of txg syncs is that the stock
bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8,
and 20% reach 9. The log space map bits reached sync pass 4 in 79%
of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This
emphasizes the fact that not only we spend less time on metadata
but we also iterate less times to convergence in spa_sync() dirtying
objects.
[related graphs:
stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png
lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png]
Finally, the improvement in IOPs that the userland gains from the
change is approximately 40%. There is a consistent win in IOPS as
you can see from the graphs below but the absolute amount of
improvement that the log spacemap gives varies within each minute
interval.
sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png
sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png
= Porting to Other Platforms
For people that want to port this commit to other platforms below
is a list of ZoL commits that this patch depends on:
Make zdb results for checkpoint tests consistent
db587941c5
Update vdev_is_spacemap_addressable() for new spacemap encoding
419ba59145
Simplify spa_sync by breaking it up to smaller functions
8dc2197b7b
Factor metaslab_load_wait() in metaslab_load()
b194fab0fb
Rename range_tree_verify to range_tree_verify_not_present
df72b8bebe
Change target size of metaslabs from 256GB to 16GB
c853f382db
zdb -L should skip leak detection altogether
21e7cf5da8
vs_alloc can underflow in L2ARC vdevs
7558997d2f
Simplify log vdev removal code
6c926f426a
Get rid of space_map_update() for ms_synced_length
425d3237ee
Introduce auxiliary metaslab histograms
928e8ad47d
Error path in metaslab_load_impl() forgets to drop ms_sync_lock
8eef997679
= References
Background, Motivation, and Internals of the Feature
- OpenZFS 2017 Presentation:
youtu.be/jj2IxRkl5bQ
- Slides:
slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project
Flushing Algorithm Internals & Performance Results
(Illumos Specific)
- Blogpost:
sdimitro.github.io/post/zfs-lsm-flushing/
- OpenZFS 2018 Presentation:
youtu.be/x6D2dHRjkxw
- Slides:
slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm
Upstream Delphix Issues:
DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320
DLPX-63385
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8442
ZFS_ACLTYPE_POSIXACL has already been tested in zpl_init_acl(),
so no need to test again on POSIX ACL access.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#9009
External consumers such as Lustre require access to the dnode
interfaces in order to correctly manipulate dnodes.
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8994Closes#9027
This patch corrects a small issue where the dsl_destroy_head()
code that runs when the async_destroy feature is disabled would
not properly decrypt the dataset before beginning processing.
If the dataset is not able to be decrypted, the optimization
code now simply does not run and the dataset is completely
destroyed in the DSL sync task.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9021
struct pathname is originally from Solaris VFS, and it has been used
in ZoL to merely call VOP from Linux VFS interface without API change,
therefore pathname::pn_path* are unused and unneeded. Technically,
struct pathname is a wrapper for C string in ZoL.
Saves stack a bit on lookup and unlink.
(#if0'd members instead of removing since comments refer to them.)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#9025
Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS,
and 5.0 and newer kernels. This is accomplished by leveraging
the fact that by definition dedicated kernel threads never need
to concern themselves with saving and restoring the user FPU state.
Therefore, they may use the FPU as long as we can guarantee user
tasks always restore their FPU state before context switching back
to user space.
For the 5.0 and 5.1 kernels disabling preemption and local
interrupts is sufficient to allow the FPU to be used. All non-kernel
threads will restore the preserved user FPU state.
For 5.2 and latter kernels the user FPU state restoration will be
skipped if the kernel determines the registers have not changed.
Therefore, for these kernels we need to perform the additional
step of saving and restoring the FPU registers. Invalidating the
per-cpu global tracking the FPU state would force a restore but
that functionality is private to the core x86 FPU implementation
and unavailable.
In practice, restricting SIMD to kernel threads is not a major
restriction for ZFS. The vast majority of SIMD operations are
already performed by the IO pipeline. The remaining cases are
relatively infrequent and can be handled by the generic code
without significant impact. The two most noteworthy cases are:
1) Decrypting the wrapping key for an encrypted dataset,
i.e. `zfs load-key`. All other encryption and decryption
operations will use the SIMD optimized implementations.
2) Generating the payload checksums for a `zfs send` stream.
In order to avoid making any changes to the higher layers of ZFS
all of the `*_get_ops()` functions were updated to take in to
consideration the calling context. This allows for the fastest
implementation to be used as appropriate (see kfpu_allowed()).
The only other notable instance of SIMD operations being used
outside a kernel thread was at module load time. This code
was moved in to a taskq in order to accommodate the new kernel
thread restriction.
Finally, a few other modifications were made in order to further
harden this code and facilitate testing. They include updating
each implementations operations structure to be declared as a
constant. And allowing "cycle" to be set when selecting the
preferred ops in the kernel as well as user space.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8754Closes#8793Closes#8965
Large allocation over the spl_kmem_alloc_warn value was being performed.
Switched to vmem_alloc interface as specified for large allocations.
Changed the subsequent frees to match.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: nmattis <nickm970@gmail.com>
Closes#8934Closes#9011
Currently, sequential async write workloads spend a lot of time
contending on the dn_struct_rwlock. This lock is responsible for
protecting the entire block tree below it; this naturally results
in some serialization during heavy write workloads. This can be
resolved by having per-dbuf locking, which will allow multiple
writers in the same object at the same time.
We introduce a new rwlock, the db_rwlock. This lock is responsible
for protecting the contents of the dbuf that it is a part of; when
reading a block pointer from a dbuf, you hold the lock as a reader.
When writing data to a dbuf, you hold it as a writer. This allows
multiple threads to write to different parts of a file at the same
time.
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens matt@delphix.com
Reviewed by: George Wilson george.wilson@delphix.com
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
External-issue: DLPX-52564
External-issue: DLPX-53085
External-issue: DLPX-57384
Closes#8946
ZFS tracing efforts are hampered by the inability to access zfs static
probes(probes using DTRACE_PROBE macros). The probes are available via
tracepoints for GPL modules only. The build could be modified to
generate a function for each unique DTRACE_PROBE invocation. These could
be then accessed via kprobes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Brad Lewis <brad.lewis@delphix.com>
Closes#8659Closes#8663
This reverts commit aa7aab6c45.
The change is not compatible with CentOS 6's 2.6.32 based kernel
due to differnces in the bio layer.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8961
This patch fixes an issue where dsl_dataset_crypt_stats() would
VERIFY that it was able to hold the encryption root. This function
should instead silently continue without populating the related
field in the nvlist, as is the convention for this code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8976
We return ENOSPC in metaslab_activate if the metaslab has weight 0,
to avoid activating a metaslab with no space available. For sanity
checking, we also assert that there is no free space in the range
tree in that case.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#8968
Having the mountpoint and dataset name both in the message made it
confusing to read. Additionally, convert this to a zfs_dbgmsg rather than
sending it to the console.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#8959
Unable to import zpool with "Large kmem_alloc" warning due to
corrupted bio's with invalid # of page vectors.
See #8867 for details.
Fail early with ENOMEM.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8867Closes#8961
The b_freeze_cksum field can only have data when ZFS_DEBUG_MODIFY
is set. Therefore, the EQUIV check must be wrapped accordingly.
For the same reason the ASSERT in arc_buf_fill() in unsafe.
However, since it's largely redundant it has simply been removed.
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8979
Chroot'd process fails to automount snapshots due to realpath(3)
failure in mount.zfs(8).
Construct a mount point path from sb of the ctldir inode and dirent
name, instead of from d_path(), so that chroot'd process doesn't get
affected by its view of fs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8903Closes#8966
After device removal, performing nopwrites on a dmu_sync-ed block
will result in a panic. This panic can show up in two ways:
1. an attempt to issue an IOCTL in vdev_indirect_io_start()
2. a failed comparison of zio->io_bp and zio->io_bp_orig in
zio_done()
To resolve both of these panics, nopwrites of blocks on indirect
vdevs should be ignored and new allocations should be performed on
concrete vdevs.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#8957
With the new parallel allocators scheme, there is a possibility for
a problem where two threads, allocating from the same allocator at
the same time, conflict with each other. There are two primary cases
to worry about. First, another thread working on another allocator
activates the same metaslab that the first thread was trying to
activate. This results in the first thread needing to go back and
reselect a new metaslab, even though it may have waited a long time
for this metaslab to load. Second, another thread working on the same
allocator may have activated a different metaslab while the first
thread was waiting for its metaslab to load. Both of these cases
can cause the first thread to be significantly delayed in issuing
its IOs. The second case can also cause metaslab load/unload churn;
because the metaslab is loaded but not fully activated, we never set
the selected_txg, which results in the metaslab being immediately
unloaded again. This process can repeat many times, wasting disk and
cpu resources. This is more likely to happen when the IO of the first
thread is a larger one (like a ZIL write) and the other thread is
doing a smaller write, because it is more likely to find an
acceptable metaslab quickly.
There are two primary changes. The first is to always proceed with
the allocation when returning from metaslab_activate if we were
preempted in either of the ways described in the previous section.
The second change is to set the selected_txg before we do the call
to activate so that even if the metaslab is not used for an
allocation, we won't immediately attempt to unload it.
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
External-issue: DLPX-61314
Closes#8843
DMU sync code calls taskq_dispatch() for each sublist of os_dirty_dnodes
and os_synced_dnodes. Since the number of sublists by default is equal
to number of CPUs, it will dispatch equal, potentially large, number of
tasks, waking up many CPUs to handle them, even if only one or few of
sublists actually have any work to do.
This change adds check for empty sublists to avoid this.
Reviewed by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#8909
With the addition of BP_EMBEDDED_TYPE_REDACTED in 30af21b0 a couple of
codepaths make wrong assumptions and could potentially result in errors.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8951
The "zfs remap" command was disabled by
6e91a72fe3, because it has little utility
and introduced some tricky bugs. This commit removes the code for it,
the associated ZFS_IOC_REMAP ioctl, and tests.
Note that the ioctl and property will remain, but have no functionality.
This allows older software to fail gracefully if it attempts to use
these, and avoids a backwards incompatibility that would be introduced if
we renumbered the later ioctls/props.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8944
This patch corrects the error message reported when attempting
to promote a dataset outside of its encryption root.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8905Closes#8935
Resolve the incorrect use of srcdir and builddir references for
various files in the build system. These have crept in over time
and went unnoticed because when building in the top level directory
srcdir and builddir are identical.
With this change it's again possible to build in a subdirectory.
$ mkdir obj
$ cd obj
$ ../configure
$ make
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8921Closes#8943
Problem Statement
=================
ZFS Channel program scripts currently require a timeout, so that hung or
long-running scripts return a timeout error instead of causing ZFS to get
wedged. This limit can currently be set up to 100 million Lua instructions.
Even with a limit in place, it would be desirable to have a sys admin
(support engineer) be able to cancel a script that is taking a long time.
Proposed Solution
=================
Make it possible to abort a channel program by sending an interrupt signal.In
the underlying txg_wait_sync function, switch the cv_wait to a cv_wait_sig to
catch the signal. Once a signal is encountered, the dsl_sync_task function can
install a Lua hook that will get called before the Lua interpreter executes a
new line of code. The dsl_sync_task can resume with a standard txg_wait_sync
call and wait for the txg to complete. Meanwhile, the hook will abort the
script and indicate that the channel program was canceled. The kernel returns
a EINTR to indicate that the channel program run was canceled.
Porting notes: Added missing return value from cv_wait_sig()
Authored by: Don Brady <don.brady@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Don Brady <don.brady@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/9425
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/d0cb1fb926Closes#8904
The thread calling dmu_tx_try_assign() can't hold the dn_struct_rwlock
while assigning the tx, because this can lead to deadlock. Specifically,
if this dnode is already assigned to an earlier txg, this thread may
need to wait for that txg to sync (the ERESTART case below). The other
thread that has assigned this dnode to an earlier txg prevents this txg
from syncing until its tx can complete (calling dmu_tx_commit()), but it
may need to acquire the dn_struct_rwlock to do so (e.g. via
dmu_buf_hold*()).
This commit adds an assertion to dmu_tx_try_assign() to ensure that this
deadlock is not inadvertently introduced.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8929
When exporting ZVOLs as SCSI LUNs, by default Windows will not
issue them UNMAP commands. This reduces storage efficiency in
many cases.
We add the SCSI_PASSTHROUGH flag to the zvol's device queue,
which lets the SCSI target logic know that it can handle SCSI
commands.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#8933
`show_str` could be a pointer to a local variable in stack
which is out-of-scope by the time
`return (snprintf(buf, buflen, "%s\n", show_str));`
is called.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8924Closes#8940
The logic to handle strong checksum collisions where the data doesn't
match is incorrect. It is not clearing the dedup bit of the blkptr,
which can cause a panic later in zio_ddt_free() due to the dedup table
not matching what is in the blkptr.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-48097
Closes#8936
Align vdev_ops_t from illumos for better compatibility.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Igor Kozhukhov <igor@dilos.org>
Closes#8925
When encryption was first added to ZFS, we made a decision to
prevent users from creating unencrypted children of encrypted
datasets. The idea was to prevent users from inadvertently
leaving some of their data unencrypted. However, since the
release of 0.8.0, some legitimate reasons have been brought up
for this behavior to be allowed. This patch simply removes this
limitation from all code paths that had checks for it and updates
the tests accordingly.
Reviewed-by: Jason King <jason.king@joyent.com>
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8737Closes#8870
If dedup is in use, the `dedupditto` property can be set, causing ZFS to
keep an extra copy of data that is referenced many times (>100x). The
idea was that this data is more important than other data and thus we
want to be really sure that it is not lost if the disk experiences a
small amount of random corruption.
ZFS (and system administrators) rely on the pool-level redundancy to
protect their data (e.g. mirroring or RAIDZ). Since the user/sysadmin
doesn't have control over what data will be offered extra redundancy by
dedupditto, this extra redundancy is not very useful. The bulk of the
data is still vulnerable to loss based on the pool-level redundancy.
For example, if particle strikes corrupt 0.1% of blocks, you will either
be saved by mirror/raidz, or you will be sad. This is true even if
dedupditto saved another 0.01% of blocks from being corrupted.
Therefore, the dedupditto functionality is rarely enabled (i.e. the
property is rarely set), and it fulfills its promise of increased
redundancy even more rarely.
Additionally, this feature does not work as advertised (on existing
releases), because scrub/resilver did not repair the extra (dedupditto)
copy (see https://github.com/zfsonlinux/zfs/pull/8270).
In summary, this seldom-used feature doesn't work, and even if it did it
wouldn't provide useful data protection. It has a non-trivial
maintenance burden (again see https://github.com/zfsonlinux/zfs/pull/8270).
We should remove the dedupditto functionality. For backwards
compatibility with the existing CLI, "zpool set dedupditto" will still
"succeed" (exit code zero), but won't have any effect. For backwards
compatibility with existing pools that had dedupditto enabled at some
point, the code will still be able to understand dedupditto blocks and
free them when appropriate. However, ZFS won't write any new dedupditto
blocks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Issue #8270Closes#8310
Redacted send/receive allows users to send subsets of their data to
a target system. One possible use case for this feature is to not
transmit sensitive information to a data warehousing, test/dev, or
analytics environment. Another is to save space by not replicating
unimportant data within a given dataset, for example in backup tools
like zrepl.
Redacted send/receive is a three-stage process. First, a clone (or
clones) is made of the snapshot to be sent to the target. In this
clone (or clones), all unnecessary or unwanted data is removed or
modified. This clone is then snapshotted to create the "redaction
snapshot" (or snapshots). Second, the new zfs redact command is used
to create a redaction bookmark. The redaction bookmark stores the
list of blocks in a snapshot that were modified by the redaction
snapshot(s). Finally, the redaction bookmark is passed as a parameter
to zfs send. When sending to the snapshot that was redacted, the
redaction bookmark is used to filter out blocks that contain sensitive
or unwanted information, and those blocks are not included in the send
stream. When sending from the redaction bookmark, the blocks it
contains are considered as candidate blocks in addition to those
blocks in the destination snapshot that were modified since the
creation_txg of the redaction bookmark. This step is necessary to
allow the target to rehydrate data in the case where some blocks are
accidentally or unnecessarily modified in the redaction snapshot.
The changes to bookmarks to enable fast space estimation involve
adding deadlists to bookmarks. There is also logic to manage the
life cycles of these deadlists.
The new size estimation process operates in cases where previously
an accurate estimate could not be provided. In those cases, a send
is performed where no data blocks are read, reducing the runtime
significantly and providing a byte-accurate size estimate.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#7958
For busy ARC situation when arc_size close to arc_c is desired. But
then it is quite likely that aggsum_compare(&arc_size, arc_c) will need
to flush per-CPU buckets to find exact comparison result. Doing that
often in a hot path penalizes whole idea of aggsum usage there, since it
replaces few simple atomic additions with dozens of lock acquisitions.
Replacing aggsum_compare() with aggsum_upper_bound() in code increasing
arc_p when ARC is growing (arc_size < arc_c) according to PMC profiles
allows to save ~5% of CPU time in aggsum code during sequential write
to 12 ZVOLs with 16KB block size on large dual-socket system.
I suppose there some minor arc_p behavior change due to lower precision
of the new code, but I don't think it is a big deal, since it should
affect only very small window in time (aggsum buckets are flushed every
second) and in ARC size (buckets are limited to 10 average ARC blocks
per CPU).
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#8901
If the zfs_remove_max_segment tunable is changed to be not a multiple of
the sector size, then the device removal code will malfunction and try
to create mappings that are smaller than one sector, leading to a panic.
On debug bits this assertion will fail in spa_vdev_copy_segment():
ASSERT3U(DVA_GET_ASIZE(&dst), ==, size);
On nondebug, the system panics with a stack like:
metaslab_free_concrete()
metaslab_free_impl()
metaslab_free_impl_cb()
vdev_indirect_remap()
free_from_removing_vdev()
metaslab_free_impl()
metaslab_free_dva()
metaslab_free()
Fortunately, the default for zfs_remove_max_segment is 1MB, so this
can't occur by default. We hit it during this test because
removal_remap.ksh changes zfs_remove_max_segment to 1KB. When testing on
4KB-sector disks, we hit the bug.
This change makes the zfs_remove_max_segment tunable more robust,
automatically rounding it up to a multiple of the sector size. We also
turn some key assertions into VERIFY's so that similar bugs would be
caught before they are encoded on disk (and thus avoid a
panic-reboot-loop).
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-61342
Closes#8893
Starting in sync pass 5 (zfs_sync_pass_dont_compress), we disable
compression (including of metadata). Ostensibly this helps the sync
passes to converge (i.e. for a sync pass to not need to allocate
anything because it is 100% overwrites).
However, in practice it increases the average number of sync passes,
because when we turn compression off, a lot of block's size will change
and thus we have to re-allocate (not overwrite) them. It also increases
the number of 128KB allocations (e.g. for indirect blocks and spacemaps)
because these will not be compressed. The 128K allocations are
especially detrimental to performance on highly fragmented systems,
which may have very few free segments of this size, and may need to load
new metaslabs to satisfy 128K allocations.
We should increase zfs_sync_pass_dont_compress. In practice on a highly
fragmented system we see a few 5-pass txg's, a tiny number of 6-pass
txg's, and no txg's with more than 6 passes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-63431
Closes#8892
Memory copy is too heavy operation to do under the congested lock.
Moving it out reduces congestion by many times to almost invisible.
Since the original zio removed from the queue, and the child zio is
not executed yet, I don't see why would the copy need protection.
My guess it just remained like this from the time when lock was not
dropped here, which was added later to fix lock ordering issue.
Multi-threaded sequential write tests with both HDD and SSD pools
with ZVOL block sizes of 4KB, 16KB, 64KB and 128KB all show major
reduction of lock congestion, saving from 15% to 35% of CPU time
and increasing throughput from 10% to 40%.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#8890
On fragmented pools with high-performance storage, the looping in
metaslab_block_picker() can become the performance-limiting bottleneck.
When looking for a larger block (e.g. a 128K block for the ZIL), we may
search through many free segments (up to hundreds of thousands) to find
one that is large enough to satisfy the allocation. This can take a long
time (up to dozens of ms), and is done while holding the ms_lock, which
other threads may spin waiting for.
When this performance problem is encountered, profiling will show
high CPU time in metaslab_block_picker, as well as in mutex_enter from
various callers.
The problem is very evident on a test system with a sync write workload
with 8K writes to a recordsize=8k filesystem, with 4TB of SSD storage,
84% full and 88% fragmented. It has also been observed on production
systems with 90TB of storage, 76% full and 87% fragmented.
The fix is to change metaslab_df_alloc() to search only up to 16MB from
the previous allocation (of this alignment). After that, we will pick a
segment that is of the exact size requested (or larger). This reduces
the number of iterations to a few hundred on fragmented pools (a ~100x
improvement).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-62324
Closes#8877
This change restricts filesystem creation if the given name
contains either '.' or '..'
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: TulsiJain <tulsi.jain@delphix.com>
Closes#8842Closes#8564
When running zloop, we occasionally see the following crash:
dmu_tx_assign(tx, TXG_WAIT) == 0 (0x1c == 0)
ASSERT at ../../module/zfs/vdev_removal.c:1507:spa_vdev_remove_thread()/sbin/ztest(+0x89c3)[0x55faf567b9c3]
The error value 0x1c is ENOSPC.
The transaction used by spa_vdev_remove_thread() should not be able to
fail due to being out of space. i.e. we should not call
dmu_tx_hold_space(). This will allow the removal thread to schedule its
work even when the pool is low on space. The "slop space" will provide
enough free space to sync out the txg.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-37853
Closes#8889
sysfs_attr_init() is required to make lockdep happy for dynamically
allocated sysfs attributes. This fixed#8868 on Fedora 29 running
kernel-debug.
This requirement was introduced in 2.6.34.
See include/linux/sysfs.h for what it actually does.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8868Closes#8884
When iterating over a ZAP object, we're almost always certain to iterate
over the entire object. If there are multiple leaf blocks, we can
realize a performance win by issuing reads for all the leaf blocks in
parallel when the iteration begins.
For example, if we have 10,000 snapshots, "zfs destroy -nv
pool/fs@1%9999" can take 30 minutes when the cache is cold. This change
provides a >3x performance improvement, by issuing the reads for all ~64
blocks of each ZAP object in parallel.
Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-58347
Closes#8862
Sometimes the target ARC size is reduced to arc_c_min, which impacts
performance. We've seen this happen as part of the random_reads
performance regression test, where the ARC size is reduced before the
reads test starts which impacts how long it takes for system to reach
good IOPS performance.
We call arc_reduce_target_size when arc_reap_cb_check() returns TRUE,
and arc_available_memory() is less than arc_c>>arc_shrink_shift.
However, arc_available_memory() could easily be low, even when arc_c is
low, because we can have tons of unused bufs in the abd kmem cache. This
would be especially true just after the DMU requests a bunch of stuff be
evicted from the ARC (e.g. due to "zpool export").
To fix this, the ARC should reduce arc_c by the requested amount, not
all the way down to arc_size (or arc_c_min), which can be very small.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-59431
Closes#8864
Scatter ABD's are allocated from a number of pages. In contrast to
linear ABD's, these pages are disjoint in the kernel's virtual address
space, so they can't be accessed as a contiguous buffer. Therefore
routines that need a linear buffer (e.g. abd_borrow_buf() and friends)
must allocate a separate linear buffer (with zio_buf_alloc()), and copy
the contents of the pages to/from the linear buffer. This can have a
measurable performance overhead on some workloads.
https://github.com/zfsonlinux/zfs/commit/87c25d567fb7969b44c7d8af63990e
("abd_alloc should use scatter for >1K allocations") increased the use
of scatter ABD's, specifically switching 1.5K through 4K (inclusive)
buffers from linear to scatter. For workloads that access blocks whose
compressed sizes are in this range, that commit introduced an additional
copy into the read code path. For example, the
sequential_reads_arc_cached tests in the test suite were reduced by
around 5% (this is doing reads of 8K-logical blocks, compressed to 3K,
which are cached in the ARC).
This commit treats single-chunk scattered buffers as linear buffers,
because they are contiguous in the kernel's virtual address space.
All single-page (4K) ABD's can be represented this way. Some multi-page
ABD's can also be represented this way, if we were able to allocate a
single "chunk" (higher-order "page" which represents a power-of-2 series
of physically-contiguous pages). This is often the case for 2-page (8K)
ABD's.
Representing a single-entry scatter ABD as a linear ABD has the
performance advantage of avoiding the copy (and allocation) in
abd_borrow_buf_copy / abd_return_buf_copy. A performance increase of
around 5% has been observed for ARC-cached reads (of small blocks which
can take advantage of this), fixing the regression introduced by
87c25d567.
Note that this optimization is only possible because all physical memory
is always mapped into the kernel's address space. This is not the case
for HIGHMEM pages, so the optimization can not be made on 32-bit
systems.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8580
We've observed that on some highly fragmented pools, most metaslab
allocations are small (~2-8KB), but there are some large, 128K
allocations. The large allocations are for ZIL blocks. If there is a
lot of fragmentation, the large allocations can be hard to satisfy.
The most common impact of this is that we need to check (and thus load)
lots of metaslabs from the ZIL allocation code path, causing sync writes
to wait for metaslabs to load, which can take a second or more. In the
worst case, we may not be able to satisfy the allocation, in which case
the ZIL will resort to txg_wait_synced() to ensure the change is on
disk.
To provide a workaround for this, this change adds a tunable that can
reduce the size of ZIL blocks.
External-issue: DLPX-61719
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8865
When ARC size is very small, aggsum_lower_bound(&arc_size) may return
negative values, that due to unsigned comparison caused delays, waiting
for arc_adjust() to "fix" it by calling aggsum_value(&arc_size). Use
of signed comparison there fixes the problem.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#8873
This patch fixes an incorrect error message that comes up when
doing a non-forcing, raw, incremental receive into a dataset
that has a newer snapshot than the "from" snapshot. In this
case, the current code prints a confusing message about an IVset
guid mismatch.
This functionality is supported by non-raw receives as an
undocumented feature, but was never supported by the raw receive
code. If this is desired in the future, we can probably figure
out a way to make it work.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #8758Closes#8863
On large systems, the memory used by loaded metaslabs can become
a concern. While range trees are a fairly efficient data structure,
on heavily fragmented pools they can still consume a significant
amount of memory. This problem is amplified when we fail to unload
metaslabs that we aren't using. Currently, we only unload a metaslab
during metaslab_sync_done; in order for that function to be called
on a given metaslab in a given txg, we have to have dirtied that
metaslab in that txg. If the dirtying was the result of an allocation,
we wouldn't be unloading it (since it wouldn't be 8 txgs since it
was selected), so in effect we only unload a metaslab during txgs
where it's being freed from.
We move the unload logic from sync_done to a new function, and
call that function on all metaslabs in a given vdev during
vdev_sync_done().
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#8837
This patch re-adds a check that was removed in 369aa50. The check
confirms that a raw receive is not occuring before truncating an
object's dn_maxblkid. At the time, it was believed that all cases
that would hit this code path would be handled in other places,
but that was not the case.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8852Closes#8857
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Closes#8822
Historically while doing performance testing we've noticed that IOPS
can be significantly reduced when all vdevs in the pool are hitting
the zfs_mg_fragmentation_threshold percentage. Specifically in a
hypothetical pool with two vdevs, what can happen is the following:
Vdev A would go above that threshold and only vdev B would be used.
Then vdev B would pass that threshold but vdev A would go below it
(we've been freeing from A to allocate to B). The allocations would
go back and forth utilizing one vdev at a time with IOPS taking a hit.
Empirically, we've seen that our vdev selection for allocations is
good enough that fragmentation increases uniformly across all vdevs
the majority of the time. Thus we set the threshold percentage high
enough to avoid hitting the speed bump on pools that are being pushed
to the edge. We effectively disable its effect in the majority of the
cases but we don't remove (at least for now) just in case we hit any
weird behavior in the future.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8859
The ZFS on-disk format stores each inode's generation ID as a 64
bit number on disk and in-core. However, the Linux kernel's inode
is only a 32 bit number. In most places, the code handles this
correctly, but the cast is missing in zfs_rezget(). For many pools,
this isn't an issue since the generation ID is computed as the
current txg when the inode is created and many pools don't have
more than 2^32 txgs.
For the pools that have more txgs, this issue causes any inode with
a high enough generation number to report IO errors after a call to
"zfs rollback" while holding the file or directory open. This patch
simply adds the missing cast.
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8858
Since zfs_znode_alloc() already takes dmu_buf_t*, taking another
uint64_t argument for objid is redundant. inode's ->i_ino does and
needs to match znode's ->z_id.
zfs_znode_alloc() in FreeBSD and illumos doesn't have this argument
since vnode doesn't have vnode# in VFS (hence ->z_id exists).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8841
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#8733Closes#8752
This reverts commit ec4f9b8f30 which introduced a narrow race which
can lead to lseek(, SEEK_DATA) incorrectly returning ENXIO. Resolve
the issue by revering this change to restore the previous behavior
which depends solely on checking the dirty list.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8816Closes#8834
Per suggestion from @behlendorf in #8777, remove vn_set_fs_pwd() and
vn_set_pwd() which are only used in zfs_ioctl.c:_init() while loading
zfs.ko.
The rest of initialization functions being called here after cwd set
to / don't depend on cwd of the process except for spa_config_load().
spa_config_load() uses a relative path ".//etc/zfs/zpool.cache" when
`rootdir` is non-NULL, which is "/etc/zfs/zpool.cache" given cwd is /,
so just unconditionally use the absolute path without "./", so that
`vn_set_pwd("/")` as well as the entire functions can be removed.
This is also what FreeBSD does.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8826
When opening a log device during import its allocation bias will
not yet have been set by vdev_load(). This results in the log
device's ashift being incorrectly applied to the maximum ashift
of the vdevs in the normal class. Which in turn prevents the
removal of any top-level devices due to the ashift check in the
spa_vdev_remove_top_check() function.
This issue is resolved by including vdev_islog in the check since
it will be set correctly during vdev_open().
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8735
dn->dn_datablksz type is uint32_t and need to be casted to uint64_t
to avoid an overflow when the record size is greater than 4 MiB.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olivier Mazouffre <olivier.mazouffre@ims-bordeaux.fr>
Closes#8778Closes#8797
This commits fixes a double-free in zfs_ioc_pool_create() triggered by
specifying an unsupported combination of properties when creating a pool
with encryption enabled.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8791
These descriptions are not uptodate with the code.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8767
Currently, count_block() does not correctly account for the
possibility that the bp that is passed to it could be embedded.
These blocks shouldn't be counted since the work of scanning
these blocks in already handled when the containing block is
scanned. This patch simply resolves this issue by returning
early in this case.
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Bill Sommerfeld <sommerfeld@alum.mit.edu>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8800Closes#8766
wait_on_page_writeback() was made GPL only in torvalds/linux@19343b5bdd.
Directly call wait_on_page_bit() without using wait_on_page_writeback()
interface, given zfs_putpage() is the only caller for now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8794
This failed on 5.2-rc1 with "error: unknown" message, for set_fs_pwd()
not being visible in both const and non-const tests.
This is caused by torvalds/linux@83da1bed86. It's configurable,
but we would want to be able to compile with default kbuild setting.
set_fs_pwd() has never been exported with exception of some distro
kernels, and set_fs_pwd() wasn't used in ZoL to begin with. The test
result was used for a spl function vn_set_fs_pwd().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8777
The issue is caused by an incorrect usage of the sizeof() operator
in vdev_obsolete_sm_object(): on 64-bit systems this is not an issue
since both "uint64_t" and "uint64_t*" are 8 bytes in size. However on
32-bit systems pointers are 4 bytes long which is not supported by
zap_lookup_impl(). Trying to remove a top-level vdev on a 32-bit system
will cause the following failure:
VERIFY3(0 == vdev_obsolete_sm_object(vd, &obsolete_sm_object)) failed (0 == 22)
PANIC at vdev_indirect.c:833:vdev_indirect_sync_obsolete()
Showing stack for process 1315
CPU: 6 PID: 1315 Comm: txg_sync Tainted: P OE 4.4.69+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
c1abc6e7 0ae10898 00000286 d4ac3bc0 c14397bc da4cd7d8 d4ac3bf0 d4ac3bd0
d790e7ce d7911cc1 00000523 d4ac3d00 d790e7d7 d7911ce4 da4cd7d8 00000341
da4ce664 da4cd8c0 da33fa6e 49524556 28335946 3d3d2030 65647620 626f5f76
Call Trace:
[<>] dump_stack+0x58/0x7c
[<>] spl_dumpstack+0x23/0x27 [spl]
[<>] spl_panic.cold.0+0x5/0x41 [spl]
[<>] ? dbuf_rele+0x3e/0x90 [zfs]
[<>] ? zap_lookup_norm+0xbe/0xe0 [zfs]
[<>] ? zap_lookup+0x57/0x70 [zfs]
[<>] ? vdev_obsolete_sm_object+0x102/0x12b [zfs]
[<>] vdev_indirect_sync_obsolete+0x3e1/0x64d [zfs]
[<>] ? txg_verify+0x1d/0x160 [zfs]
[<>] ? dmu_tx_create_dd+0x80/0xc0 [zfs]
[<>] vdev_sync+0xbf/0x550 [zfs]
[<>] ? mutex_lock+0x10/0x30
[<>] ? txg_list_remove+0x9f/0x1a0 [zfs]
[<>] ? zap_contains+0x4d/0x70 [zfs]
[<>] spa_sync+0x9f1/0x1b10 [zfs]
...
[<>] ? kthread_stop+0x110/0x110
This commit simply corrects the "integer_size" parameter used to lookup
the vdev's ZAP object.
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8790
CID 186143: Memory - illegal accesses (USE_AFTER_FREE)
This patch fixes an use-after-free in spa_import_progress_destroy()
moving the kmem_free() call at the end of the function.
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8788
In `config/kernel-timer.m4` refactor slightly to check more generally
for the new `timer_setup()` APIs, but also check the callback signature
because some kernels (notably 4.14) have the new `timer_setup()` API but
use the old callback signature. Also add a check for a `flags` member in
`struct timer_list`, which was added in 4.1-rc8.
Add compatibility shims to `include/spl/sys/timer.h` to allow using the
new timer APIs with the only two caveats being that the callback
argument type must be declared as `spl_timer_list_t` and an explicit
assignment is required to get the timer variable for the `timer_of()`
macro. So the callback would look like this:
```c
__cv_wakeup(spl_timer_list_t t)
{
struct timer_list *tmr = (struct timer_list *)t;
struct thing *parent = from_timer(parent, tmr,
parent_timer_field);
... /* do stuff with parent */
```
Make some minor changes to `spl-condvar.c` and `spl-taskq.c` to use the
new timer APIs instead of conditional code.
Reviewed-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Closes#8647
When reading kstats, the health (aka state) of the pool is stored into
/proc/spl/kstat/zfs/POOLNAME/state via spa_state_to_name().
However, during import/export there is a case where the spa exists,
but the root vdev does not exist. This fix checks that case and sets
the state to "TRANSITIONING"
Unfortunately, it is not easy to reproduce a test for this. It was
detected randomly during ZTS runs while kstats were also being sampled
regularly. After this change, further testing did not trip on the case
and the TRANSITIONING state was collected at least once by the kstats.
For posterity, the backtrace prior to this fix is:
[Mon May 13 17:21:00 2019] RIP: 0010:spa_state_to_name+0x10/0xb0 [zfs]
...
Mon May 13 17:21:00 2019] Call Trace:
[Mon May 13 17:21:00 2019] spa_state_data+0x1a/0x40 [zfs]
[Mon May 13 17:21:00 2019] kstat_seq_show+0x117/0x440 [spl]
[Mon May 13 17:21:00 2019] seq_read+0xe5/0x430
[Mon May 13 17:21:00 2019] proc_reg_read+0x45/0x70
[Mon May 13 17:21:00 2019] __vfs_read+0x1b/0x40
[Mon May 13 17:21:00 2019] vfs_read+0x8e/0x130
[Mon May 13 17:21:00 2019] SyS_read+0x55/0xc0
[Mon May 13 17:21:00 2019] ? SyS_fcntl+0x5d/0xb0
[Mon May 13 17:21:00 2019] do_syscall_64+0x73/0x130
[Mon May 13 17:21:00 2019] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes#8746
Commit torvalds/linux@46ad0840b has removed the architecture specific
rwsem source and headers leaving only the generic version. As part
of this change the RWSEM_ACTIVE_READ_BIAS and RWSEM_ACTIVE_WRITE_BIAS
macros were moved to the private kernel/locking/rwsem.h header.
This results in a build failure because these macros were required
to implement the rw_tryupgrade() compatibility function.
In practice, this isn't a major problem because there are only a
few consumers of rw_tryupgrade() and because consumers of rw_tryupgrade
should be written to retry using rw_enter(RW_WRITER).
After auditing all of the callers only dmu_zfetch() was determined
not to perform a retry. It has been updated in this commit to
resolve this issue.
That said, the rw_tryupgrade() functionality should be considered
for possible removal in a future release due to the difficultly
in supporting the interface.
Reviewed-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8730
The db_dirtycnt of an EVICTING dbuf is always 0. However, it still
appears in the dn_dbufs tree. If we call dnode_dirty_l1range on a
range that contains an EVICTING dbuf, we will attempt to mark it dirty
(which will fail because it's EVICTING, resulting in a new dbuf being
created and dirtied). Later, in ZFS_DEBUG mode, we assert that all the
dbufs in the range are dirty. If the EVICTING dbuf is still present,
this will trip the assertion erroneously.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#8745
When an import requires a long MMP activity check, or when the user
requests pool recovery, the import make take a long time. The user may
not know why, or be able to tell whether the import is progressing or is
hung.
Add a kstat which lists all imports currently being processed by the
kernel (currently only one at a time is possible, but the kstat allows
for more than one). The kstat is /proc/spl/kstat/zfs/import_progress.
The kstat contents are as follows:
pool_guid load_state multihost_secs max_txg pool_name
16667015954387398 3 15 0 tank3
load_state: the value of spa_load_state
multihost_secs: seconds until the end of the multihost activity
check; if over, or none required, this is 0
max_txg: current spa_load_max_txg, if rewind is occurring
This could be used by outside tools, such as a pacemaker resource agent,
to report import progress, or as a part of manual troubleshooting. The
zpool import subcommand could also be modified to report this
information.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#8696
These messages will want '\n' like any other regular printk() messages.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8726
Given how zfs_getattr() is implemented, zfs_getattr_fast() (used by
->getattr() of zpl inodes) also needs to consider an additional link
count if "snapdir" property is set to "visible".
Without this, # of directories in root inode of each dataset doesn't
match the link count when snapdir is visible.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8727
The 5.0 kernel defines the macro ASM_BUG. In order to prevent a
conflict and build failure rename ASM_BUG to ZFS_ASM_BUG. This
is currently only an issue on aarch64 but all instances of
ASM_BUG we're renamed to avoid any future conflict on x86_64.
Reviewed-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8725
Issue #8545
Commit 98bb45e resolved a deadlock which could occur when
handling a page fault in zfs_write(). This change added
the uio_fault_disable field to the uio structure but failed
to initialize it to B_FALSE. This uninitialized field would
cause uiomove_iov() to call __copy_from_user_inatomic()
instead of copy_from_user() resulting in unexpected EFAULTs.
Resolve the issue by fully initializing the uio, and clearing
the uio_fault_disable flags after it's used in zfs_write().
Additionally, reorder the uio_t field assignments to match
the order the fields are declared in the structure.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8640Closes#8719
Exported and documented a new module parameter.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#8706
When receiving a DRR_OBJECT record the receive_object() function
needs to determine how to handle a spill block associated with the
object. It may need to be removed or kept depending on how the
object was modified at the source.
This determination is currently accomplished using a heuristic which
takes in to account the DRR_OBJECT record and the existing object
properties. This is a problem because there isn't quite enough
information available to do the right thing under all circumstances.
For example, when only the block size changes the spill block is
removed when it should be kept.
What's needed to resolve this is an additional flag in the DRR_OBJECT
which indicates if the object being received references a spill block.
The DRR_OBJECT_SPILL flag was added for this purpose. When set then
the object references a spill block and it must be kept. Either
it is update to date, or it will be replaced by a subsequent DRR_SPILL
record. Conversely, if the object being received doesn't reference
a spill block then any existing spill block should always be removed.
Since previous versions of ZFS do not understand this new flag
additional DRR_SPILL records will be inserted in to the stream.
This has the advantage of being fully backward compatible. Existing
ZFS systems receiving this stream will recreate the spill block if
it was incorrectly removed. Updated ZFS versions will correctly
ignore the additional spill blocks which can be identified by
checking for the DRR_SPILL_UNMODIFIED flag.
The small downside to this approach is that is may increase the size
of the stream and of the received snapshot on previous versions of
ZFS. Additionally, when receiving streams generated by previous
unpatched versions of ZFS spill blocks may still be lost.
OpenZFS-issue: https://www.illumos.org/issues/9952
FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8668
`zfs set atime|relatime=off|on` doesn't disable or enable the property
on read for datasets whose property was inherited from parent, until
a dataset is once unmounted and mounted again.
(The properties start to work properly if a dataset is once unmounted
and mounted again. The difference comes from regular mount process,
e.g. via zpool import, uses mount options based on properties read
from ondisk layout for each dataset, whereas
`zfs set atime|relatime=off|on` just remounts a specified dataset.)
--
# zpool create p1 <device>
# zfs create p1/f1
# zfs set atime=off p1
# echo test > /p1/f1/test
# sync
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
p1 176K 18.9G 25.5K /p1
p1/f1 26K 18.9G 26K /p1/f1
# zfs get atime
NAME PROPERTY VALUE SOURCE
p1 atime off local
p1/f1 atime off inherited from p1
# stat /p1/f1/test | grep Access | tail -1
Access: 2019-04-26 23:32:33.741205192 +0900
# cat /p1/f1/test
test
# stat /p1/f1/test | grep Access | tail -1
Access: 2019-04-26 23:32:50.173231861 +0900
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ changed by read(2)
--
The problem is that zfsvfs::z_atime which was probably intended to keep
incore atime state just gets updated by a callback function of "atime"
property change, atime_changed_cb(), and never used for anything else.
Since now that all file read and atime update use a common function
zpl_iter_read_common() -> file_accessed(), and whether to update atime
via ->dirty_inode() is determined by atime_needs_update(),
atime_needs_update() needs to return false once atime is turned off.
It currently continues to return true on `zfs set atime=off`.
Fix atime_changed_cb() by setting or dropping SB_NOATIME in VFS super
block depending on a new atime value, so that atime_needs_update() works
as expected after property change.
The same problem applies to "relatime" except that a self contained
relatime test is needed. This is because relatime_need_update() is based
on a mount option flag MNT_RELATIME, which doesn't exist in datasets
with inherited "relatime" property via `zfs set relatime=...`, hence it
needs its own relatime test zfs_relatime_need_update().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8674Closes#8675
Drop duplicated phrases in comments.
Also drop an obsolete comment "Perform a mount of the associated...",
as all it does now is get objid from DMU and lookup incore inode.
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8707
Linux kernel commit ca79b0c211af63fa3276f0e3fd7dd9ada2439839
"mm: convert totalram_pages and totalhigh_pages variables to atomic"
replaced `totalhigh_pages` with an inline function `totalhigh_pages()`.
This broke compilation on IA32, etc, as ZoL uses `totalhigh_pages`
on archs with highmem. Confirmed on Fedora 30 (5.0.9-301.fc30.i686).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8677Closes#8701
The kernel function which adds new zvols as disks to the system,
add_disk(), briefly opens and closes the zvol as part of its work.
Closing a zvol involves waiting for two txgs to sync. This, combined
with the fact that the taskq processing new zvols is single threaded,
makes this processing new zvols slow.
Waiting for these txgs to sync is only necessary if the zvol has been
written to, which is not the case during add_disk(). This change adds
tracking of whether a zvol has been written to so that we can skip the
txg_wait_synced() calls when they are unnecessary.
This change also fixes the flags passed to blkdev_get_by_path() by
vdev_disk_open() to be FMODE_READ | FMODE_WRITE | FMODE_EXCL instead of
just FMODE_EXCL. The flags were being incorrectly calculated because
we were using the wrong version of vdev_bdev_mode().
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes#8526Closes#8615
The comment in lz4_compress_zfs could be more clear and specific. It
also contains needlessly strong language.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes: #8702Closes: #8703
The 'zpool resilver' command requires that the resilver_defer
feature is active on the pool. Unfortunately, the check for
this was left out of the original patch. This commit simply
corrects this so that the command properly returns an error
in this case.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8700
The size argument of snprintf(3) in glibc and snprintf() in Linux
kernel includes trailing \0, as snprintf(3) man page explains it as
"write at most size bytes (including the trailing null byte ('\0'))",
i.e. snprintf() can just take buffer size.
e.g. For snprintf() in module/zfs/zfs_ctldir.c, a buffer size is
MAXPATHLEN, and a caller is passing MAXPATHLEN to snprintf(), so size
should just be `path_len` to do what the caller is trying to do.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8692
Not all block devices, notably scsi_debug, set a root_blkg on the
request queue. Remove this assertion and allow the the existing
call to blkg_tryget() to gracefully handle the NULL (which it does).
Reviewed-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8678
Use NV_ENCODE_NATIVE for nvlist encoding variable instead of 0.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8653
Use either SEEK_* or 0,1,2..., but not both.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8656
This patch fixes 2 issues with the DMU free throttle implemented
in dmu_free_long_range(). The first issue is that get_next_chunk()
was calculating the number of L1 blocks the free would dirty
incorrectly. In some cases involving extremely large files, this
code would greatly overestimate the number of effected L1 blocks,
causing excessive calls to txg_wait_open(). This patch corrects
the calculation.
The second issue is that the free throttle uses the total number
of free'd blocks in all (open, quiescing, and syncing) txgs to
determine whether to throttle. This causes large frees (such as
those created by the first issue) to cause 4 txg syncs before
any further frees were allowed to proceed. This patch ensures
that the accounting is done entirely in a per-txg fashion, so
that frees from a given txg don't affect those that immediately
follow it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8655
Unused since 5649246dd3("Remove znode move functionality"),
and ZNODE_STAT_ADD() will never be needed.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8636
These aren't unused.
`flag` in zfs_create() also isn't to indicate large file.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8635
1. Support QAT when ZFS is root file-system:
When ZFS module is loaded before QAT started, the QAT can
be started again in post-process, e.g.:
echo 0 > /sys/module/zfs/parameters/zfs_qat_compress_disable
echo 0 > /sys/module/zfs/parameters/zfs_qat_encrypt_disable
echo 0 > /sys/module/zfs/parameters/zfs_qat_checksum_disable
2. Verify alder checksum of the de-compress result
3. Allocate Digest, IV and AAD buffer in physical contiguous
memory by QAT_PHYS_CONTIG_ALLOC.
4. Update the documentation for zfs_qat_compress_disable,
zfs_qat_checksum_disable, zfs_qat_encrypt_disable.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Chengfeix Zhu <chengfeix.zhu@intel.com>
Closes#8323Closes#8610
This replaces empty for loops with while loops to make the code easier
to read.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported-by: github.com/dcb314
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#6681Closes#6682Closes#6683Closes#8623
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#8626
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#8626
When receiving a raw send stream only reallocated objects
whose contents were not freed by the standard indicators
should call dmu_free_long_range().
Furthermore, if calling dmu_free_long_range() is required
then the objects current block size must be used and not
the new block size.
Two additional test cases were added to provided realistic
test coverage for processing reallocated objects which are
part of a raw receive.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8528Closes#8607
This patch simply up cleans up a nit and corrects an error message
issue that were introduced in the Multiple DVA scrub patch.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8619
When receiving an object to a previously allocated interior slot
the new object should be "allocated" by setting DMU_NEW_OBJECT,
not "reallocated" with dnode_reallocate(). For resilience verify
the slot is free as required in case the stream is malformed.
Add a test case to generate more realistic incremental send streams
that force reallocation to occur during the receive.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8067Closes#8614
Fix style issue for 'tx->tx_txg&TXG_MASK'. There should be white
space around the '&' character. Split the dnode_reallocate() ASSERT
to make it more readable to clearly separate the checks.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8606
The error path in zio_crypt_key_unwrap would call zio_crypt_key_destroy which
calls rw_destroy(&key->zk_salt_lock); which has not yet been initialized.
We move the rw_init() call to the start of zio_crypt_key_unwrap instead.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#8604Closes#8605
The bulk[] array index, count, must be reset per-iteration in order to
not overwrite the stack.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#8072Closes#8597Closes#8601
d12614521a("Fixes for procfs files backed by linked lists")
uses PDE_DATA(), but since PDE_DATA() (public interface which
replaced old public interface PDE()) first appeared in upstream
kernel 3.10, it lacks visible local definition for kernel < 3.10.
Move the local PDE_DATA() definition to a ZoL header, to unbreak
build on kernel < 3.10.
--
module/spl/spl-procfs-list.c: In function 'procfs_list_open':
module/spl/spl-procfs-list.c:166: error: implicit declaration of function 'PDE_DATA'
module/spl/spl-procfs-list.c:166: warning: assignment makes pointer from integer without a cast
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8599
This partially reverts commit 5dbf8b4ed. This change resolved
the issues observed with truncated files in raw sends. However,
the required changes to dnode_allocate() introduced a regression
for non-raw streams which needs to be understood.
The additional debugging improvements from the original patch
were not reverted.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7378
Issue #8528
Issue #8540
Issue #8565Close#8584
When a pool is initially created (by `zpool create`), predictive
prefetch is inadvertently disabled, until the pool is export/import-ed,
or the machine is rebooted.
When device removal was introduced, we added some code to disable
predictive prefetching until indirect vdevs have been loaded. This
resulted in the "default state" of prefetch being disabled, until we
proactively enable it after indirect vdevs are loaded. Unfortunately
this resulted in a few bugs where in some code paths we neglect to
enable predictive prefetch. The first of these was fixed by
20507534d4
This commit fixes another case where we also need to explicitly enable
predictive prefetch, when the pool is initially created.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8577
The features.kernel layout should match features.pool.
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#8566
There are several places where we use zfs_dbgmsg and %p to
print pointers. In the Linux kernel, these values obfuscated
to prevent information leaks which means the pointers aren't
very useful for debugging crash dumps. We decided to restrict
the permissions of dbgmsg (and some other kstats while we were
at it) and print pointers with %px in zfs_dbgmsg as well as
spl_dumpstack
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: sara hartse <sara.hartse@delphix.com>
Closes#8467Closes#8476
Callers of txg_wait_open() which set should_quiesce=B_TRUE should be
accounted for as iowait time. Otherwise, the caller is understood
to be idle and cv_wait_sig() is used to prevent incorrectly inflating
the system load average.
Similarly txg_wait_wait() has been updated to use cv_wait_io() to
be accounted against iowait.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8550Closes#8558
UNMAP/TRIM support is a frequently-requested feature to help
prevent performance from degrading on SSDs and on various other
SAN-like storage back-ends. By issuing UNMAP/TRIM commands for
sectors which are no longer allocated the underlying device can
often more efficiently manage itself.
This TRIM implementation is modeled on the `zpool initialize`
feature which writes a pattern to all unallocated space in the
pool. The new `zpool trim` command uses the same vdev_xlate()
code to calculate what sectors are unallocated, the same per-
vdev TRIM thread model and locking, and the same basic CLI for
a consistent user experience. The core difference is that
instead of writing a pattern it will issue UNMAP/TRIM commands
for those extents.
The zio pipeline was updated to accommodate this by adding a new
ZIO_TYPE_TRIM type and associated spa taskq. This new type makes
is straight forward to add the platform specific TRIM/UNMAP calls
to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are
handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs.
This makes it possible to largely avoid changing the pipieline,
one exception is that TRIM zio's may exceed the 16M block size
limit since they contain no data.
In addition to the manual `zpool trim` command, a background
automatic TRIM was added and is controlled by the 'autotrim'
property. It relies on the exact same infrastructure as the
manual TRIM. However, instead of relying on the extents in a
metaslab's ms_allocatable range tree, a ms_trim tree is kept
per metaslab. When 'autotrim=on', ranges added back to the
ms_allocatable tree are also added to the ms_free tree. The
ms_free tree is then periodically consumed by an autotrim
thread which systematically walks a top level vdev's metaslabs.
Since the automatic TRIM will skip ranges it considers too small
there is value in occasionally running a full `zpool trim`. This
may occur when the freed blocks are small and not enough time
was allowed to aggregate them. An automatic TRIM and a manual
`zpool trim` may be run concurrently, in which case the automatic
TRIM will yield to the manual TRIM.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Contributions-by: Tim Chase <tim@chase2k.com>
Contributions-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8419Closes#598
This patch fixes a few issues with raw receives involving
truncated files:
* dnode_reallocate() now calls dnode_set_blksz() instead of
dnode_setdblksz(). This ensures that any remaining dbufs with
blkid 0 are resized along with their containing dnode upon
reallocation.
* One of the calls to dmu_free_long_range() in receive_object()
needs to check that the object it is about to free some contents
or hasn't been completely removed already by a previous call to
dmu_free_long_object() in the same function.
* The same call to dmu_free_long_range() in the previous point
needs to ensure it uses the object's current block size and
not the new block size. This ensures the blocks of the object
that are supposed to be freed are completely removed and not
simply partially zeroed out.
This patch also adds handling for DRR_OBJECT_RANGE records to
dprintf_drr() for debugging purposes.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7378Closes#8528
Make a local copy of the vd_path and preserve the removal error
for use in spa_history_log_internal(). This is required because
after spa_vdev_exit() there is nothing preventing the vdev state
from changing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Igor Kozhukhov <igor@dilos.org>
Closes#8522
Added missing remove of detachable VDEV from txg's DTL list
to avoid use-after-free for the split VDEV
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Roman Strashkin <roman.strashkin@nexenta.com>
Closes#5565Closes#7856
ZFS supports O_RSYNC for read operations and when specified will ensure
the same level of data integrity that O_DSYNC and O_SYNC provides for
writes. O_RSYNC by itself has no effect so it must be combined with
either O_DSYNC or O_SYNC. However, many platforms don't support O_RSYNC
and have mapped O_SYNC to mean O_RSYNC within ZFS. This is incorrect
and causes unnecessary calls to zil_commit. Only platforms which
support O_RSYNC should implement the zil_commit functionality in the
read code path.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <george.wilson@delphix.com>
Closes#8523
When Multihost is enabled, and a pool is imported, uberblock writes
include ub_mmp_delay to allow an importing node to calculate the
duration of an activity test. This value, is not enough information.
If zfs_multihost_fail_intervals > 0 on the node with the pool imported,
the safe minimum duration of the activity test is well defined, but does
not depend on ub_mmp_delay:
zfs_multihost_fail_intervals * zfs_multihost_interval
and if zfs_multihost_fail_intervals == 0 on that node, there is no such
well defined safe duration, but the importing host cannot tell whether
mmp_delay is high due to I/O delays, or due to a very large
zfs_multihost_interval setting on the host which last imported the pool.
As a result, it may use a far longer period for the activity test than
is necessary.
This patch renames ub_mmp_sequence to ub_mmp_config and uses it to
record the zfs_multihost_interval and zfs_multihost_fail_intervals
values, as well as the mmp sequence. This allows a shorter activity
test duration to be calculated by the importing host in most situations.
These values are also added to the multihost_history kstat records.
It calculates the activity test duration differently depending on
whether the new fields are present or not; for importing pools with
only ub_mmp_delay, it uses
(zfs_multihost_interval + ub_mmp_delay) * zfs_multihost_import_intervals
Which results in an activity test duration less sensitive to the leaf
count.
In addition, it makes a few other improvements:
* It updates the "sequence" part of ub_mmp_config when MMP writes
in between syncs occur. This allows an importing host to detect MMP
on the remote host sooner, when the pool is idle, as it is not limited
to the granularity of ub_timestamp (1 second).
* It issues writes immediately when zfs_multihost_interval is changed
so remote hosts see the updated value as soon as possible.
* It fixes a bug where setting zfs_multihost_fail_intervals = 1 results
in immediate pool suspension.
* Update tests to verify activity check duration is based on recorded
tunable values, not tunable values on importing host.
* Update tests to verify the expected number of uberblocks have valid
MMP fields - fail_intervals, mmp_interval, mmp_seq (sequence number),
that sequence number is incrementing, and that uberblock values match
tunable settings.
Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7842
In addition to dsl_dataset_evict_async() releasing a hold, there is
an error case in dsl_dataset_hold_obj() which had missed 4 additional
release calls. This was introduced in a1d477c24.
openzfsonosx-commit: https://github.com/openzfsonosx/zfs/commit/63ff7f1c
Authored by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8517
If the buffer 'digest_buffer' is allocated in the qat_checksum()
stack, it can't ensure that the address is physically contiguous,
and the DMA result of the buffer may be handled incorrectly.
Using QAT_PHYS_CONTIG_ALLOC() ensures a physically
contiguous allocation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Chengfei, Zhu <chengfeix.zhu@intel.com>
Closes#8323Closes#8521
Update the dirty check in dmu_offset_next() such that dnode's
are only considered dirty for the purpose or reporting holes
when there are pending data blocks or frees to be synced. This
ensures that when there are only metadata updates to be synced
(atime) that holes are reported.
Reviewed-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6958Closes#8505
As it turns out, on the Windows platform when rw_init() is called
(rather its bedrock call ExInitializeResourceLite) it is placed on
an active-list of locks, and is removed at rw_destroy() time.
dnode_move() has logic to copy over the old-dnode to new-dnode,
including calling dmu_zfetch_init(new-dnode). But due to the missing
dmu_zfetch_fini(old-dnode), kmem will call dnode_dest() to release the
memory (and in debug builds fill pattern 0xdeadbeef) over the Windows
active-lock's prev/next list pointers, making Windows sad.
But on other platforms, the contents of dmu_zfetch_fini() is one
call to list_destroy() and one to rw_destroy(), which is effectively
a no-op call and is not required. This commit is mostly for
"correctness" and can be skipped there.
Porting Notes:
* This leak exists on Linux but currently can never happen because
the dnode_move() functionality is not supported.
openzfsonosx-commit: openzfsonosx/zfs@d95fe517
Authored by: Julian Heuking <JulianH@beckhoff.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#8519
When destroying an arc_buf_hdr_t its identity cannot be discarded
until it is entirely undiscoverable. This not only includes being
unhashed, but also being removed from the l2arc header list.
Discarding the header's identify prematurely renders the hash
lock useless because it will always hash to bucket zero.
This change resolves a race with l2arc_evict() by discarding the
identity after it has been removed from the l2arc header list.
This ensures either the header is not on the list or contains
the correct identify.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7688Closes#8144
Currently, there is an issue in the sequential scrub code which
prevents self healing from working in some cases. The scrub code
will split up all DVA copies of a bp and issue each of them
separately. The problem is that, since each of the DVAs is no
longer associated with the others, the self healing code doesn't
have the opportunity to repair problems that show up in one of the
DVAs with the data from the others.
This patch fixes this issue by ensuring that all IOs issued by the
sequential scrub code include all DVAs. Initially, only the first
DVA of each is attempted. If an issue arises, the IO is retried
with all available copies, giving the self healing code a chance
to correct the issue.
To test this change, this patch also adds the ability for zinject
to specify individual DVAs to inject read errors into. We then
add a new test case that utilizes this functionality to ensure
scrubs and self-healing reads can handle and transparently fix
issues with individual copies of blocks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8453
The number of IO and checksum events should match the number of errors
seen in zpool status. Previously there was a mismatch between the
two counts because zpool status would only count unrecovered errors,
while zpool events would get an event for *all* errors (recovered or
not). This lead to situations where disks could be faulted for
"too many errors", while at the same time showing zero errors in zpool
status.
This fixes the zpool status error counters to increment at the same
times we post the error events.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#4851Closes#7817
This patch simply fixes some small memory leaks that can happen
during error handling in zfsvfs_create_impl(). If the function
fails, it frees all the memory / references it created.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8490
This patch attempts to address some user concerns that have arisen
since errata 4 was introduced.
* The errata warning has been made less scary for users without
any encrypted datasets.
* The errata warning now clears itself without a pool reimport if
the bookmark_v2 feature is enabled and no encrypted datasets
exist.
* It is no longer possible to create new encrypted datasets without
enabling the bookmark_v2 feature, thus helping to ensure that the
errata is resolved.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue ##8308
Closes#8504
Before sequential scrub patches ZFS never aggregated I/Os above 128KB.
Sequential scrub bumped that to 1MB, supposedly to reduce number of
head seeks for spinning disks. But for SSDs it makes little to no
sense, especially on FreeBSD, where due to MAXPHYS limitation device
will likely still see bunch of 128KB I/Os instead of one large.
Having more strict aggregation limit for SSDs allows to avoid
allocation of large memory buffer and copy to/from it, that is a
serious problem when throughput reaches gigabytes per second.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#8494
Currently, there is an issue in the raw receive code where
raw receives are allowed to happen on top of previously
non-raw received datasets. This is a problem because the
source-side dataset doesn't know about how the blocks on
the destination were encrypted. As a result, any MAC in
the objset's checksum-of-MACs tree that is a parent of both
blocks encrypted on the source and blocks encrypted by the
destination will be incorrect. This will result in
authentication errors when we decrypt the dataset.
This patch fixes this issue by adding a new check to the
raw receive code. The code now maintains an "IVset guid",
which acts as an identifier for the set of IVs used to
encrypt a given snapshot. When a snapshot is raw received,
the destination snapshot will take this value from the
DRR_BEGIN payload. Non-raw receives and normal "zfs snap"
operations will cause ZFS to generate a new IVset guid.
When a raw incremental stream is received, ZFS will check
that the "from" IVset guid in the stream matches that of
the "from" destination snapshot. If they do not match, the
code will error out the receive, preventing the problem.
This patch requires an on-disk format change to add the
IVset guids to snapshots and bookmarks. As a result, this
patch has errata handling and a tunable to help affected
users resolve the issue with as little interruption as
possible.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8308
This patch adds the bookmark v2 feature to the on-disk format. This
feature will be needed for the upcoming redacted sends and for an
upcoming fix that for raw receives. The feature is not currently
used by any code and thus this change is a no-op, aside from the
fact that the user can now enable the feature.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #8308
Currently, the receive code can create an unreadable dataset from
a correct raw send stream. This is because it is currently
impossible to set maxblkid to a lower value without freeing the
associated object. This means truncating files on the send side
to a non-0 size could result in corruption. This patch solves this
issue by adding a new 'force' flag to dnode_new_blkid() which will
allow the raw receive code to force the DMU to accept the provided
maxblkid even if it is a lower value than the existing one.
For testing purposes the send_encrypted_files.ksh test has been
extended to include a variety of truncated files and multiple
snapshots. It also now leverages the xattrtest command to help
ensure raw receives correctly handle xattrs.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8168Closes#8487
Most of the zfs_arc_* module parameters do not have their values used by
the ARC code directly. Instead, there is a function, arc_tuning_update,
which is called during module initialization and periodically
thereafter, whose job is to fetch the module parameter values, clamp/
limit them appropriately, and then assign those values to a separate set
of internal variables that are actually referenced by the ARC code.
Commit 3ec34e55 featured an overhaul of arc_reclaim_thread, which is the
former location where the post-init-time calls to arc_tuning_update
would occur. The rework split the work previously done by the
arc_reclaim_thread into a pair of replacement threads; and
unfortunately, the call to arc_tuning_update fell through the cracks and
was lost in the reorganization.
This meant that changing almost any ARC-related zfs module parameter via
/sys/module/zfs/parameters/ would result in the module parameter value
itself appearing to change; however the modification would not actually
propagate to the ARC code and have any real effect.
This commit reinstates the post-init-time call to arc_tuning_update. It
is now called during arc_adjust_cb_check; this should be equivalent to
its former call location in arc_reclaim_thread.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Justin Gottula <justin@jgottula.com>
Closes#8405Closes#8463
This patch modifies the zfs_ioc_snapshot_list_next() ioctl to enable it
to take input parameters that alter the way looping through the list of
snapshots is performed. The idea here is to restrict functions that
throw away some of the snapshots returned by the ioctl to a range of
snapshots that these functions actually use. This improves efficiency
and execution speed for some rollback and send operations.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#8077
Resolve a vdev_initialize crash uncovered by ztest. Similar
to when starting a new initialization verify that a removal
is not in progress. Additionally, do not restart when the
thread already exists. This check is now congruent with the
POOL_INITIALIZE_DO handling in spa_vdev_initialize_impl().
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8477
Instead of choosing a leaf vdev quasi-randomly, by starting at the root
vdev and randomly choosing children, rotate over leaves to issue MMP
writes. This fixes an issue in a pool whose top-level vdevs have
different numbers of leaves.
The issue is that the frequency at which individual leaves are chosen
for MMP writes is based not on the total number of leaves but based on
how many siblings the leaves have.
For example, in a pool like this:
root-vdev
+------+---------------+
vdev1 vdev2
| |
| +------+-----+-----+----+
disk1 disk2 disk3 disk4 disk5 disk6
vdev1 and vdev2 will each be chosen 50% of the time. Every time vdev1
is chosen, disk1 will be chosen. However, every time vdev2 is chosen,
disk2 is chosen 20% of the time. As a result, disk1 will be sent 5x as
many MMP writes as disk2.
This may create wear issues in the case of SSDs. It also reduces the
effectiveness of MMP as it depends on the writes being evenly
distributed for the case where some devices fail or are partitioned.
The new code maintains a list of leaf vdevs in the pool. MMP records
the last leaf used for an MMP write in mmp->mmp_last_leaf. To choose
the next leaf, MMP starts at mmp->mmp_last_leaf and traverses the list,
continuing from the head if the tail is reached. It stops when a
suitable leaf is found or all leaves have been examined.
Added a test to verify MMP write distribution is even.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7953
The linux kernel's nfsd implementation use RWF_SYNC to determine if the
write is synchronous or not. This flag is used to set the kernel's I/O
control block flags. Unfortunately, ZFS was not updated to inspect these
flags so NFS sync writes were not being honored.
This change maps the IOCB_* flags to the ZFS equivalent.
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <george.wilson@delphix.com>
Closes#8474Closes#8452Closes#8486
Commit torvalds/linux@736706bee has removed the get_fs() function
as a bit of cleanup. It has been defined as KERNEL_DS on all
architectures for all supported kernels. Replace get_fs() with
KERNEL_DS as was done in the kernel.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8479
The function bpobj_iterate_impl overflows the stack when bpobjs
are deeply nested. Rewrite the function to eliminate the recursion.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#7674Closes#7675Closes#7908
Before allowing new allocations to the metaslab we need to ensure
that any issued initializing writes have been synced. Otherwise,
it's possible for metaslab_block_alloc() to allocate a range which
is about to be overwritten by an initializing IO.
Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8461
Fix indentation of code in ifdef's.
Remove obsolete comment.
Make if/else statements more readable by adding braces.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8459
When multihost is enabled, and a pool is suspended, return
EINVAL in response to "zpool clear <pool>". The pool
may have been imported on another host while I/O was suspended.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6933Closes#8460
abd_alloc() normally does scatter allocations, thus solving the problem
that ABD originally set out to: the bulk of ZFS's allocations are single
pages, which are faster to allocate and free, and don't suffer from
internal fragmentation (and the inability to reclaim memory because some
buffers in the slab are still allocated).
However, the current code does linear allocations for 4KB and smaller
allocations, defeating the purpose of ABD.
Scatter ABD's use at least one page each, so sub-page allocations waste
some space when allocated as scatter (e.g. 2KB scatter allocation wastes
half of each page). Using linear ABD's for small allocations means that
they will be put on slabs which contain many allocations. This can
improve memory efficiency, but it also makes it much harder for ARC
evictions to actually free pages, because all the buffers on one slab
need to be freed in order for the slab (and underlying pages) to be
freed. Typically, 512B and 1KB kmem caches have 16 buffers per slab, so
it's possible for them to actually waste more memory than scatter (one
page per buf = wasting 3/4 or 7/8th; one buf per slab = wasting
15/16th).
Spill blocks are typically 512B and are heavily used on systems running
selinux with the default dnode size and the `xattr=sa` property set.
By default we will use linear allocations for 512B and 1KB, and scatter
allocations for larger (1.5KB and up).
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8455
The spa_txg_history_init_io() and spa_txg_history_fini_io() were
mistakenly taking SCL_ALL when only SCL_CONFIG is required to
access the vdev stats. This could result in a deadlock which
was observed when running ztest.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8445
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8444
The issue is caused by a small discrepancy in how userland creates the
partition layout and the kernel estimates available space:
* zpool command: subtract 9M from the usable device size, then align
to 1M boundary. 9M is the sum of 1M "start" partition alignment + 8M
EFI "reserved" partition.
* kernel module: subtract 10M from the device size. 10M is the sum of
1M "start" partition alignment + 1m "end" partition alignment + 8M
EFI "reserved" partition.
For devices where the number of sectors is not a multiple of the
alignment size the zpool command will create a partition layout which
reserves less than 1M after the 8M EFI "reserved" partition:
Disk /dev/sda: 1024 MiB, 1073739776 bytes, 2097148 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 49811D40-16F4-4E41-84A9-387703950D7F
Device Start End Sectors Size Type
/dev/sda1 2048 2078719 2076672 1014M Solaris /usr & Apple ZFS
/dev/sda9 2078720 2095103 16384 8M Solaris reserved 1
When the kernel module vdev_open() the device its max_asize ends up
being slightly smaller than asize: this results in a huge number (16E)
reported by metaslab_class_expandable_space().
This change prevents bdev_max_capacity() from returing a size smaller
than bdev_capacity().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#1468Closes#8391
Soft lockups could happen when multiple threads trying
to get zrl on the same dnode handle in order to allocate
and initialize the dnode marked as DN_SLOT_ALLOCATED.
Don't loop from beginning when we can't get zrl, otherwise
we would increase the zrl refcount and nobody can actually
lock it.
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Closes#8433
The SCST driver (SCSI target driver implementation) and possibly
others may issue read bio's with a length of zero bytes. Although
this is unusual, such bio's issued under certain condition can cause
kernel oops, due to how rangelock is implemented.
rangelock_add_reader() is not made to handle overlap of two (or more)
ranges from read bio's with the same offset when one of them has size
of 0, even though they conceptually overlap. Allowing them to enter
rangelock results in kernel oops by dereferencing invalid pointer,
or assertion failure on AVL tree manipulation with debug enabled
kernel module.
For example, this happens when read bio whose (offset, size) is
(0, 0) enters rangelock followed by another read bio with (0, 4096)
when (0, 0) rangelock is still locked, when there are no pending
write bio's. It can also happen with reverse order, which is (0, N)
followed by (0, 0) when (0, N) is still locked. More details
mentioned in #8379.
Kernel Oops on ->make_request_fn() of ZFS volume
https://github.com/zfsonlinux/zfs/issues/8379
Prevent this by returning bio with size 0 as success without entering
rangelock. This has been done for write bio after checking flusher
bio case (though not for the same reason), but not for read bio.
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8379Closes#8401
This patch introduces 3 new histograms per metaslab. These
histograms track segments that have made it to the metaslab's
space map histogram (and are part of the spacemap) but have
not yet reached the ms_allocatable tree on loaded metaslab's
because these metaslab's are currently syncing and haven't
gone through metaslab_sync_done() yet.
The histograms help when we decide whether to load an unloaded
metaslab in-order to allocate from it. When calculating the
weight of an unloaded metaslab traditionally, we look at the
highest bucket of its spacemap's histogram. The problem is
that we are not guaranteed to be able to allocated that
segment when we load the metaslab because it may still be at
the freeing, freed, or defer trees. The new histograms are
used when we try to calculate an unloaded metaslab's weight
to deal with this issue by removing segments that have would
not be in the allocatable tree at runtime. Note, that this
method of dealing with this is not completely accurate as
adjacent segments are not always consolidated in the space
map histogram of a metaslab.
In addition and to make things deterministic, we always reset
the weight of unloaded metaslabs based on their space map
weight (instead of doing that on a need basis). Thus, every
time a metaslab is loaded and its weight is reset again (from
the weight based on its space map to the one based on its
allocatable range tree) we expect (and assert) that this
change in weight can only get better if it doesn't stay the
same.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8358
Trying to mount a dataset from a readonly pool could inadvertently start
the user accounting upgrade task, leading to the following failure:
VERIFY3(tx->tx_threads == 2) failed (0 == 2)
PANIC at txg.c:680:txg_wait_synced()
Showing stack for process 2541
CPU: 2 PID: 2541 Comm: z_upgrade Tainted: P O 3.16.0-4-amd64 #1 Debian 3.16.51-3
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
[<0>] ? dump_stack+0x5d/0x78
[<0>] ? spl_panic+0xc9/0x110 [spl]
[<0>] ? dnode_next_offset+0x1d4/0x2c0 [zfs]
[<0>] ? dmu_object_next+0x77/0x130 [zfs]
[<0>] ? dnode_rele_and_unlock+0x4d/0x120 [zfs]
[<0>] ? txg_wait_synced+0x91/0x220 [zfs]
[<0>] ? dmu_objset_id_quota_upgrade_cb+0x10f/0x140 [zfs]
[<0>] ? dmu_objset_upgrade_task_cb+0xe3/0x170 [zfs]
[<0>] ? taskq_thread+0x2cc/0x5d0 [spl]
[<0>] ? wake_up_state+0x10/0x10
[<0>] ? taskq_thread_should_stop.part.3+0x70/0x70 [spl]
[<0>] ? kthread+0xbd/0xe0
[<0>] ? kthread_create_on_node+0x180/0x180
[<0>] ? ret_from_fork+0x58/0x90
[<0>] ? kthread_create_on_node+0x180/0x180
This patch updates both functions responsible for checking if we can
perform user accounting to verify the pool is not readonly.
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8424
If we hit the (NSEC_TO_TICK(diff) == 0) condition in
zio_delay_interrupt, zio_interrupt is never called and the
zio does not progress.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: sara hartse <sara.hartse@delphix.com>
Closes#8404
