Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17443
While FreeBSD itself does not support projects, there is no reason
why it can't be controlled via `zfs project` and other subcommands.
Most of the code is actually already there and just needs some
revival and sync with Linux, plus enabling some tests not depending
on the OS support.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17423
zfs_putpages() would put the entire range of pages onto the ZIL, then
return VM_PAGER_OK for each page to the kernel. However, an associated
zil_commit() or txg sync had not happened at this point, so the write
may not actually be on disk.
So, we rework it to use a ZIL commit callback, and do the post-write
work of undirtying the page and signaling completion there. We return
VM_PAGER_PEND to the kernel instead so it knows that we will take care
of it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
If the kernel will honour our error returns, use them. If not, fool it
by setting a writeback error on the superblock, if available.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
If the pool is suspended, we'll just block in zil_commit(). If the
system is shutting down, blocking wouldn't help anyone. So, we should
keep this test for now, but at least return an error for anyone who is
actually interested.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
The superblock pointer will always be set, as will z_log, so remove code
supporting cases that can't occur (on Linux at least).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
* zfs_link: allow tempfile sync to fail if pool suspends
4653e2f7d3 (#17355) allows dmu_tx_assign() to fail if the pool suspends
when failmode=continue, but zfs_link() can fall back to
txg_wait_synced() if it has to wait for a tempfile to be fully created
before continuing, which will block if the pool suspends.
Handle this by requesting an error return if the pool suspends when
failmode=continue, and if that happens, return EIO.
* zfs_clone_range: allow dirty wait to fail if pool suspends
4653e2f7d3 (#17355) allows dmu_tx_assign() to fail if the pool suspends
when failmode=continue, but zfs_clone_range() can fall back to
txg_wait_synced() if it has to wait for a dirty block to be written out,
which will block if the pool suspends.
Handle this by requesting an error return if the pool suspends when
failmode=continue, and if that happens, return EIO.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17413
The module parameter name was not changed in FreeBSD sysctls
list: 'vfs.zfs.vol.mode'. Also, on Linux side the name is:
/sys/module/zfs/parameters/zvol_volmode.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17386
The module parameter now is represented in FreeBSD sysctls list
with name: 'vfs.zfs.vol.prefetch_bytes'. The default value is 131072,
same as on Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17385
Since it was disabled for 2.3, there's been no confirmed sightings of
strange IO errors, misalignments or related shenanigans. Absence of
evidence and all that, but I'd rather fix bugs in the new code than in
the old.
"It isn't hubris until he's failed."
-- Chrisjen Avasarala
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17399
If the kernel fails to allocate the gendisk, zvo_disk will be NULL, and
derefencing it will explode. So don't do that.
Sponsored-by: Klara, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17396
The module parameter now is represented in FreeBSD sysctls list with
name: 'vfs.zfs.vol.inhibit_dev'. The default value is '0', same as on
Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17384
As commit 320f0c6 did for Linux, connect POSIX_FADV_WILLNEED
up to dmu_prefetch() on FreeBSD.
While there, fix portability problems in tests/functional/fadvise.
1. Instead of relying on the numerical values of POSIX_FADV_XXX macros,
accept macro names as arguments to the file_fadvise program. (The
numbers happen to match on Linux and FreeBSD, but future systems may
vary and it seems a little strange/raw to count on that.)
2. For implementation reasons, SEQUENTIAL doesn't reach ZFS via FreeBSD
VFS currently (perhaps something that should be investigated in
FreeBSD). Since on Linux we're treating SEQUENTIAL and WILLNEED the
same, it doesn't really matter which one we use, so switch the test
over to WILLNEED exercise the new prefetch code on both OSes the
same way.
Reviewed-by: Mateusz Guzik <mjg@FreeBSD.org>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Thomas Munro <tmunro@FreeBSD.org>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Closes#17379
Three occurences with an 'e', and all of them mine. Maybe it's an
British thing?
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Since 3.17 Linux has provided param ops for 64-bit ints, so we don't
need to use our own anymore.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Nothing uses them now.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
The use for spl_taskq_kick was the only use, and the comment that
module_param_call is obsolete is no longer true - it's still very much
used even in recent kernels.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Nothing in any FreeBSD code uses them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
By the assertion, vdev_geom_io_done() only expects ENXIO on an error
when the geom is a top-level (allocating) vdev[1][2]. However, zinject
currently can't insert ENXIO directly, possibly because on Solaris
outright disk failures were reported with EIO[2][3].
This is a narrow workaround to convert EIO to ENXIO when injections are
enabled, to avoid the assertion and allow the test suite to test
behaviour related to probe failure on FreeBSD.
1. freebsd/freebsd-src@37ec52ca7a
2. freebsd/freebsd-src@cd730bd6b2
3. illumos/illumos-gate@ea8dc4b6d2
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
It has existed as a warning since 0.8.3, 5+ years ago. I think people
have had enough time.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17376
Renamed in 6.2, and the compat wrapper removed in 6.15. No signature or
functional change apart from that, so a very minimal update for us.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17229
The intent is that the filesystem may have a reference to an "old"
version of the new directory, eg if it was keeping it alive because a
remote NFS client still had it open.
We don't need anything like that, so this really just changes things so
we return error codes encoded in pointers.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17229
Before Direct I/O was implemented, I've implemented lighter version
I called Uncached I/O. It uses normal DMU/ARC data path with some
optimizations, but evicts data from caches as soon as possible and
reasonable. Originally I wired it only to a primarycache property,
but now completing the integration all the way up to the VFS.
While Direct I/O has the lowest possible memory bandwidth usage,
it also has a significant number of limitations. It require I/Os
to be page aligned, does not allow speculative prefetch, etc. The
Uncached I/O does not have those limitations, but instead require
additional memory copy, though still one less than regular cached
I/O. As such it should fill the gap in between. Considering this
I've disabled annoying EINVAL errors on misaligned requests, adding
a tunable for those who wants to test their applications.
To pass the information between the layers I had to change a number
of APIs. But as side effect upper layers can now control not only
the caching, but also speculative prefetch. I haven't wired it to
VFS yet, since it require looking on some OS specifics. But while
there I've implemented speculative prefetch of indirect blocks for
Direct I/O, controllable via all the same mechanisms.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Fixes#17027
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
This allows to rewrite content of specified file(s) as-is without
modifications, but at a different location, compression, checksum,
dedup, copies and other parameter values. It is faster than read
plus write, since it does not require data copying to user-space.
It is also faster for sync=always datasets, since without data
modification it does not require ZIL writing. Also since it is
protected by normal range range locks, it can be done under any
other load. Also it does not affect file's modification time or
other properties.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
For UIO_ITER, we are just wrapping a kernel iterator. It will take care
of its own offsets if necessary. We don't need to do anything, and if we
do try to do anything with it (like advancing the iterator by the skip
in zfs_uio_advance) we're just confusing the kernel iterator, ending up
at the wrong position or worse, off the end of the memory region.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17298
Make zvol I/O requests processing asynchronous on FreeBSD side in some
cases. Clone zvol threading logic and required module parameters from
Linux side. Make zvol threadpool creation/destruction logic shared for
both Linux and FreeBSD.
The IO requests are processed asynchronously in next cases:
- volmode=geom: if IO request thread is geom thread or cannot sleep.
- volmode=cdev: if IO request passed thru struct cdevsw .d_strategy
routine, mean is AIO request.
In all other cases the IO requests are processed synchronously. The
volthreading zvol property is ignored on FreeBSD side.
Sponsored-by: vStack, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: @ImAwsumm
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17169
These are only required to support these ioctls on Linux <4.5. Since
4.18 is our cutoff, we don't need this code anymore.
Also removing related test things that will never match again.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17308
SYSCTL_SIZEOF() has been introduced in FreeBSD by commit "sysctl(9):
Ease exporting struct sizes; Discourage doing that" (713abc9880aa) in
branch 'main'. It will soon be backported to 'stable/14'. We will thus
be able to remove the old, alternate version left in the '#else' branch
as soon as 'stable/13' goes out of support (April 30, 2026).
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17309
When forced to resort to ganging, ZFS currently allocates three child
blocks, each one third of the size of the original. This is true
regardless of whether larger allocations could be made, which would
allow us to have fewer gang leaves. This improves performance when
fragmentation is high enough to require ganging, but not so high that
all the free ranges are only just big enough to hold a third of the
recordsize. This is also useful for improving the behavior of a future
change to allow larger gang headers.
We add the ability for the allocation codepath to allocate a range of
sizes instead of a single fixed size. We then use this to pre-allocate
the DVAs for the gang children. If those allocations fail, we fall back
to the normal write path, which will likely re-gang.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
### Background
Various admin operations will be invoked by some userspace task, but the
work will be done on a separate kernel thread at a later time. Snapshots
are an example, which are triggered through zfs_ioc_snapshot() ->
dsl_dataset_snapshot(), but the actual work is from a task dispatched to
dp_sync_taskq.
Many such tasks end up in dsl_enforce_ds_ss_limits(), where various
limits and permissions are enforced. Among other things, it is necessary
to ensure that the invoking task (that is, the user) has permission to
do things. We can't simply check if the running task has permission; it
is a privileged kernel thread, which can do anything.
However, in the general case it's not safe to simply query the task for
its permissions at the check time, as the task may not exist any more,
or its permissions may have changed since it was first invoked. So
instead, we capture the permissions by saving CRED() in the user task,
and then using it for the check through the secpolicy_* functions.
### Current implementation
The current code calls CRED() to get the credential, which gets a
pointer to the cred_t inside the current task and passes it to the
worker task. However, it doesn't take a reference to the cred_t, and so
expects that it won't change, and that the task continues to exist. In
practice that is always the case, because we don't let the calling task
return from the kernel until the work is done.
For Linux, we also take a reference to the current task, because the
Linux credential APIs for the most part do not check an arbitrary
credential, but rather, query what a task can do. See
secpolicy_zfs_proc(). Again, we don't take a reference on the task, just
a pointer to it.
### Changes
We change to calling crhold() on the task credential, and crfree() when
we're done with it. This ensures it stays alive and unchanged for the
duration of the call.
On the Linux side, we change the main policy checking function
priv_policy_ns() to use override_creds()/revert_creds() if necessary to
make the provided credential active in the current task, allowing the
standard task-permission APIs to do the needed check. Since the task
pointer is no longer required, this lets us entirely remove
secpolicy_zfs_proc() and the need to carry a task pointer around as
well.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Originally the Lustre ZFS OSD code was going to use zfs_uio_t structs
for supporting Direct I/O with ZFS. However, this has changed to using
abd_t structs instead. This exports the proper symbols that will be used
by the Lustre ZFS OSD code.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#17256
The 6.0 kernel removes the 'migratepage' VFS op. Check for
migratepage.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org
Ensure default user/group/project quotas are visible through quota
tools and filesystem stats when no per-ID quota is configured. This
maintains consistency between quota visibility and configured defaults.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This adds default userquota, groupquota, and projectquota properties to
MASTER_NODE_OBJ to make them accessible during zfsvfs_init() (regular
DSL properties require dsl_config_lock, which cannot be safely acquired
in this context). The zfs_fill_zplprops_impl() logic is updated to read
these default properties directly from MASTER_NODE_OBJ.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Firmly in the "shouldn't happen" camp, but at least GCC 7.4 (Ubuntu
18.04) complained about them, and it's easy to shut up, so do so.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17189
It turns out that approach taken in the original version of the patch
was wrong. So now, we're taking approach in-line with how kernel
actually does it - when sb is being torn down, access to it
is serialized via sb->s_umount rwsem, only when that lock is taken
is it okay to work with s_flags - and the other mistake I was doing
was trying to make SB_ACTIVE work, but apparently the kernel checks
the negative variant - not SB_DYING and not SB_BORN.
Kernels pre-6.6 don't have SB_DYING, but check if sb is hashed
instead.
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
This extends the existing special-case for zfs/poolname to split and
create any number of intermediate sysctl names, so that multi-level
module names are possible.
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Module names are mapped directly to directory names in procfs, but
nothing is done to create the intermediate directories, or remove them.
This makes it impossible to sensibly present kstats about sub-objects.
This commit loops through '/'-separated names in the full module name,
creates a separate module for each, and hooks them up with a parent
pointer and child counter, and then unrolls this on the other side when
deleting a module.
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This helps to avoids confusion with the similarly-named
txg_wait_synced().
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
This statx(2) mask returns the alignment restrictions for O_DIRECT
access on the given file.
We're expected to return both memory and IO alignment. For memory, it's
always PAGE_SIZE. For IO, we return the current block size for the file,
which is the required alignment for an arbitrary block, and for the
first block we'll fall back to the ARC when necessary, so it should
always work.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16972
Kernel & userspace specifics are in zfs_file_os.c, so there's no
particular reason these have to be separate.
The one platform-specific part is in the Linux kernel part, to offload
flushes to a taskq if we're already inside a filesystem transaction.
This would be normally be an unsatisfying wart, but I'm intending to
remove this shortly, so I'm content to leave it gated for the moment.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
skc->skc_name also needs to be freed in an error path.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Vandana Rungta <vrungta@amazon.com>
Closes#17041
According to the upstream change, all callers set it, and all block
devices either honoured it or ignored it, so removing it entirely allows
a bunch of handling for the "unset" case to be removed, and it becomes
effectively implied.
We follow suit, and keep setting it for older kernels.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This is a convenience for filesystems that need the inode of their
parent or their own name, as its often complicated to get that
information. We don't need those things, so this is just detecting which
prototype is expected and adjusting our callback to match.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Originally #16856 updated Linux Direct I/O requests to use the new
pin_user_pages API. However, it was an oversight that this PR only
handled iov_iter's of type ITER_IOVEC and ITER_UBUF. Other iov_iter
types may try and use the pin_user_pages API if it is available. This
can lead to panics as the iov_iter is not being iterated over correctly
in zfs_uio_pin_user_pages().
Unfortunately, generic iov_iter API's that call pin_user_page_fast() are
protected as GPL only. Rather than update zfs_uio_pin_user_pages() to
account for all iov_iter types, we can simply just call
zfs_uio_get_dio_page_iov_iter() if the iov_iter type is not ITER_IOVEC
or ITER_UBUF. zfs_uio_get_dio_page_iov_iter() calls the
iov_iter_get_pages() calls that can handle any iov_iter type.
In the future it might be worth using the exposed iov_iter iterator
functions that are included in the header iov_iter.h since v6.7. These
functions allow for any iov_iter type to be iterated over and advanced
while applying a step function during iteration. This could possibly be
leveraged in zfs_uio_pin_user_pages().
A new ZFS test case was added to test that a ITER_BVEC is handled
correctly using this new code path. This test case was provided though
issue #16956.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16956Closes#17006
