zfs_dbgmsg() does not need newline at the end of the message.
While there, slightly update/sync FreeBSD __dprintf().
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16536
Adding O_DIRECT support to ZFS to bypass the ARC for writes/reads.
O_DIRECT support in ZFS will always ensure there is coherency between
buffered and O_DIRECT IO requests. This ensures that all IO requests,
whether buffered or direct, will see the same file contents at all
times. Just as in other FS's , O_DIRECT does not imply O_SYNC. While
data is written directly to VDEV disks, metadata will not be synced
until the associated TXG is synced.
For both O_DIRECT read and write request the offset and request sizes,
at a minimum, must be PAGE_SIZE aligned. In the event they are not,
then EINVAL is returned unless the direct property is set to always (see
below).
For O_DIRECT writes:
The request also must be block aligned (recordsize) or the write
request will take the normal (buffered) write path. In the event that
request is block aligned and a cached copy of the buffer in the ARC,
then it will be discarded from the ARC forcing all further reads to
retrieve the data from disk.
For O_DIRECT reads:
The only alignment restrictions are PAGE_SIZE alignment. In the event
that the requested data is in buffered (in the ARC) it will just be
copied from the ARC into the user buffer.
For both O_DIRECT writes and reads the O_DIRECT flag will be ignored in
the event that file contents are mmap'ed. In this case, all requests
that are at least PAGE_SIZE aligned will just fall back to the buffered
paths. If the request however is not PAGE_SIZE aligned, EINVAL will
be returned as always regardless if the file's contents are mmap'ed.
Since O_DIRECT writes go through the normal ZIO pipeline, the
following operations are supported just as with normal buffered writes:
Checksum
Compression
Encryption
Erasure Coding
There is one caveat for the data integrity of O_DIRECT writes that is
distinct for each of the OS's supported by ZFS.
FreeBSD - FreeBSD is able to place user pages under write protection so
any data in the user buffers and written directly down to the
VDEV disks is guaranteed to not change. There is no concern
with data integrity and O_DIRECT writes.
Linux - Linux is not able to place anonymous user pages under write
protection. Because of this, if the user decides to manipulate
the page contents while the write operation is occurring, data
integrity can not be guaranteed. However, there is a module
parameter `zfs_vdev_direct_write_verify` that controls the
if a O_DIRECT writes that can occur to a top-level VDEV before
a checksum verify is run before the contents of the I/O buffer
are committed to disk. In the event of a checksum verification
failure the write will return EIO. The number of O_DIRECT write
checksum verification errors can be observed by doing
`zpool status -d`, which will list all verification errors that
have occurred on a top-level VDEV. Along with `zpool status`, a
ZED event will be issues as `dio_verify` when a checksum
verification error occurs.
ZVOLs and dedup is not currently supported with Direct I/O.
A new dataset property `direct` has been added with the following 3
allowable values:
disabled - Accepts O_DIRECT flag, but silently ignores it and treats
the request as a buffered IO request.
standard - Follows the alignment restrictions outlined above for
write/read IO requests when the O_DIRECT flag is used.
always - Treats every write/read IO request as though it passed
O_DIRECT and will do O_DIRECT if the alignment restrictions
are met otherwise will redirect through the ARC. This
property will not allow a request to fail.
There is also a module parameter zfs_dio_enabled that can be used to
force all reads and writes through the ARC. By setting this module
parameter to 0, it mimics as if the direct dataset property is set to
disabled.
Reviewed-by: Brian Behlendorf <behlendorf@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Co-authored-by: Matt Macy <mmacy@FreeBSD.org>
Co-authored-by: Brian Behlendorf <behlendorf@llnl.gov>
Closes#10018
module/zfs/ddt.c:2612:6: error: variable 'total' set but not used
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
zfs_acl_node_alloc allocates an uninitialized data buffer, but upstack
zfs_acl_chmod only partially initializes it. KMSAN reported that this
memory remained uninitialized at the point when it was read by
lzjb_compress, which suggests a possible kernel memory disclosure bug.
The full KMSAN warning may be found in the PR.
https://github.com/openzfs/zfs/pull/16511
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: Axcient
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When reviewing logs after a failure, its useful to see where
unsuspend/resume was requested.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
All callers to spa_prop_get() and spa_prop_get_nvlist() supplied their
own preallocated nvlist (except ztest), so we can remove the option to
have them allocate one if none is supplied.
This sidesteps a bug in spa_prop_get(), where the error var wasn't
initialised, which could lead to the provided nvlist being freed at the
end.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16505
This adds zfs_valstr, a collection of pretty printers for bitfields and
enums. These are useful in debugging, logging and other display contexts
where raw values are difficult for the untrained (or even trained!) eye
to decipher.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Requires the new 'flat' physical data which has the start
time for a class entry.
The amount to prune can be based on a target percentage of
the unique entries or based on the age (i.e., every entry
older than N days).
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16277
The simplest thing first: add the FDT and log objects to the list of
objects to be considered when checking for leaks.
The rest is based on a conceptual change in all of this patch stack: a
block on disk with a 'D' bit is not necessarily in the DDT at all
(pruned), or in the DDT ZAPs (still on the log).
As such, walking the DDT up front is difficult (for all the reasons that
walking an unflushed log is difficult) and not really useful, since it's
not a reflection of what's on disk anyway.
Instead, we rework things here to be more like the BRT checks. When we
see a dedup'd block, we look it up in the DDT, consume a refcount, and
for the second-or-later instances, count them as duplicates.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#16277
In 4938d01db (#14086) zio_flag_t was converted from an enum (generally
signed 32-bit) to a uint64_t. The corresponding change wasn't made to
the error reporting subsystem, limiting the error flags being delivered
to zed to 32 bits. This bumps the whole pipeline to use uint64s.
A tiny bit of compatibility is added for newer zed working agsinst an
older kernel module, because its easy to do and misdetecting
scrub/resilver errors and taking action is potentially dangerous. Making
it work for new kernel modules against older zed seems to be far more
invasive for far less benefit, so I have not.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16469
When process got SIGSTOP/SIGTSTP, issig() dequeue them and return 0.
But process could still have another signal pending after dequeue. So,
after dequeue, check and return 1, if signal_pending.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#16464
This commit extends the zpool-reguid(8) command with a -g flag, which
allows the user to specify the GUID to set.
This change also adds some general tests for zpool-reguid(8).
Sponsored-by: Wasabi Technology, Inc.
Sponsored-by: Klara, Inc.
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Dispatched delayed tasks were not added to tasks_total, and cancelled
tasks were not removed. This notably could make tasks_total go to
UNIT64_MAX, but just generally meant the count could be wrong. So lets
not!
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16473
Commit 329e2ffa4bca456e65c3db7f5c5c04931c551b61 has made mount.zfs(8) to
call libzfs function 'zfs_mount_at', in order to propagate dataset
properties into mount options. This fix however, is limited to a special
use case where mount.zfs(8) is used in initrd with option '-o zfsutil'.
If either initrd or the user need to use mount.zfs(8) to mount a file
system with 'mountpoint' set to 'legacy', '-o zfsutil' can't be used and
the original issue #7947 will still happen.
Since the existing code already excluded the possibility of calling
'zfs_mount_at' when it was invoked as a helper program from zfs(8), by
checking 'ZFS_MOUNT_HELPER' environment variable, it makes no sense to
avoid calling 'zfs_mount_at' without '-o zfsutil'.
An exception however, is when mount.zfs(8) was invoked with '-o remount'
to update the mount options for an existing mount point. In this case
call mount(2) directly without modifying the mount options passed from
command line.
Furthermore, don't run mount.zfs(8) helper for automounting snapshot.
The above change to make mount.zfs(8) to call 'zfs_mount_at'
apparently caused it to trigger an automount for the snapshot
directory. When the helper was invoked as a result of a snapshot
automount, an infinite recursion will occur.
Since the need of invoking user mode mount(8) for automounting was to
overcome that the 'vfs_kern_mount' being GPL-only, just run mount(8)
without the mount.zfs(8) helper by adding option '-i'.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: WHR <whr@rivoreo.one>
Closes#16393
Some callers (eg `do_corrective_recv()`) pass in a dest buffer much
smaller than the wanted 87.5% of the source buffer, because the
incoming abd is larger than the source data and they "know" what the
decompressed size with be.
However, `abd_borrow_buf()` rightly asserts if we try to borrow more
than is available, so these callers fail.
Previously when all we had was a dest buffer, we didn't know how big it
was, so we couldn't do anything. Now we have a dest abd, with a size, so
we can clamp dest size to the abd size.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This commit changes the frontend zio_compress_data and
zio_decompress_data APIs to take ABD points instead of buffer pointers.
All callers are updated to match. Any that already have an appropriate
ABD nearby now use it directly, while at the rest we create an one.
Internally, the ABDs are passed through to the provider directly.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This commit changes the provider compress and decompress API to take ABD
pointers instead of buffer pointers for both data source and
destination. It then updates all providers to match.
This doesn't actually change the providers to do chunked compression,
just changes the API to allow such an update in the future. Helper
macros are added to easily adapt the ABD functions to their buffer-based
implementations.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This is mostly to make searching easier.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This will make future refactoring easier.
There are two we can't change for the moment, because zio_compress_data
does hole detection & collapsing which zio_decompress_data does not
actually know how to handle.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
