Commit Graph

1408 Commits

Author SHA1 Message Date
Giuseppe Di Natale
42db43e982 OpenZFS 2932 - support crash dumps to raidz, etc. pools
Authored by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/2932
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/810e43b
Closes #5984
Closes #5216
2017-04-10 10:24:17 -07:00
George Wilson
3b7f360c96 OpenZFS 8023 - Panic destroying a metaslab deferred range tree
Authored by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

We don't want to dirty any data when we're in the final txgs of the pool
export logic. This change introduces checks to make sure that no data is
dirtied after a certain point. It also addresses the culprit of this
specific bug – the space map cannot be upgraded when we're in final
stages of pool export. If we encounter a space map that wants to be
upgraded in this phase, then we simply ignore the request as it will get
retried the next time we set the fragmentation metric on that metaslab.

OpenZFS-issue: https://www.illumos.org/issues/8023
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ef00f5
Closes #5991
2017-04-09 16:12:35 -07:00
Andriy Gapon
c0c8cc7b43 OpenZFS 8027 - tighten up dsl_pool_dirty_delta
Authored by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8027
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/642668d
Closes #5988
2017-04-09 16:04:35 -07:00
Don Brady
177c91d06e Fix regression in zfs_ereport_start()
On 32-bit platforms spa_state is 32 bits without cast, and thus
caused a NULL pointer dereference when treated as 64bit in
var arg.  Accidentally introduced by bcdb96a.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #5966 
Closes #5965
2017-04-05 14:24:26 -07:00
Steven Hartland
2e215fecbe OpenZFS 7885 - zpool list can report 16.0e for expandsz
Authored by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>

When a member of a RAIDZ has been replaced with a device smaller than
the original, then the top level vdev can report its expand size as
16.0E.
The reduced child asize causes the RAIDZ to have a vdev_asize lower than
its vdev_max_asize which then results in an underflow during the
calculation of the parents expand size.
Fix this by updating the vdev_asize if it shrinks, which is already
protected by a check against vdev_min_asize so should always be safe.
Also for RAIDZ vdevs, ensure that the sum of their child vdev_min_asize
is always greater than the parents vdev_min_size.

Reviewed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7885
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/bb0dbaa
Closes #5963
2017-04-05 09:33:20 -07:00
N Clark
bcdb96a3e1 Additional Information for Zedlets
* Add ZPOOL pool state to zfs_post_common to
  allow differentiation between export and destroy
  by zedlets.

* Add pool name as standard export  This ensures
  pool name is exported to zedlets.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Closes #5942
2017-04-03 14:23:02 -07:00
Gvozden Neskovic
84c07adadb Remove dependency on linear ABD
Wherever possible it's best to avoid depending on a linear ABD.
Update the code accordingly in the following areas.

- vdev_raidz
- zio, zio_checksum
- zfs_fm
- change abd_alloc_for_io() to use abd_alloc()

Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #5668
2017-03-29 12:24:51 -07:00
LOLi
ff61d1a495 Check ashift validity in 'zpool add'
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.

Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #5878
2017-03-28 17:21:11 -07:00
Chunwei Chen
12aec7dcd9 Fix wrong offset args in vdev_cache_write
The offset arguments is wrong when changing to abd_copy_off in a6255b7

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #5932 
Closes #5936
2017-03-28 11:06:22 -07:00
Brian Behlendorf
8d70398740 Retry zfs_znode_alloc() in zfs_mknode()
For historical reasons zfs_mknode() was written such that it could
never fail.  This poses a problem for Linux since zfs_znode_alloc()
could potentually failure due to low memory.  Handle this gracefully
by retrying zfs_znode_alloc() until it succeeds, direct reclaim
will eventually be able to allocate memory.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5535 
Closes #5908
2017-03-23 18:26:50 -07:00
George Wilson
55922e73b4 OpenZFS 3821 - Race in rollback, zil close, and zil flush
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Richard Lowe <richlowe@richlowe.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/3821
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/43297f9
Closes #5905
2017-03-23 18:20:58 -07:00
wli5
6a9d635998 GZIP compression offloading with QAT accelerator
This patch implement the hardware accelerator method in GZIP compression
in ZFS. When the ZFS pool is enabled GZIP compression, the compression
API will be automatically transferred to the hardware accelerator to
free up CPU resource and speed up the compression time.

* To enable Intel QAT hardware acceleration in ZOL you need to have QAT
  hardware and the driver installed:
  * QAT hardware DH8950:
  http://ark.intel.com/products/79483/Intel-QuickAssist-Adapter-8950
  * QAT driver:
  https://01.org/intel-quickassist-technology
* Start QAT driver in your system:
  service qat_service start
* Enable QAT in ZFS, e.g.:
  ./configure --with-qat=<qat-driver-path>/QAT1.6
  make
* Set GZIP compression in ZFS dataset:
  zfs set compression = gzip <dataset>
* Get QAT hardware statistics by:
  cat /proc/spl/kstat/zfs/qat
* To disable QAT in ZFS:
  insmod zfs.ko zfs_qat_disable=1

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes #5846
2017-03-22 17:58:47 -07:00
Matthew Ahrens
64fc776208 OpenZFS 7968 - multi-threaded spa_sync()
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>

spa_sync() iterates over all the dirty dnodes and processes each of them
by calling dnode_sync(). If there are many dirty dnodes (e.g. because we
created or removed a lot of files), the single thread of spa_sync()
calling dnode_sync() can become a bottleneck. Additionally, if many
dnodes are dirtied concurrently in open context (e.g. due to concurrent
file creation), the os_lock will experience lock contention via
dnode_setdirty().

The solution is to track dirty dnodes on a multilist_t, and for
spa_sync() to use separate threads to process each of the sublists in
the multilist.

OpenZFS-issue: https://www.illumos.org/issues/7968
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4a2a54c
Closes #5752
2017-03-20 18:36:00 -07:00
Olaf Faaland
a3478c0747 Linux 4.11 compat: iops.getattr and friends
In torvalds/linux@a528d35, there are changes to the getattr family of functions,
struct kstat, and the interface of inode_operations .getattr.

The inode_operations .getattr and simple_getattr() interface changed to:

int (*getattr) (const struct path *, struct dentry *, struct kstat *,
    u32 request_mask, unsigned int query_flags)

The request_mask argument indicates which field(s) the caller intends to use.
Fields the caller has not specified via request_mask may be set in the returned
struct anyway, but their values may be approximate.

The query_flags argument indicates whether the filesystem must update
the attributes from the backing store.

Currently both fields are ignored.  It is possible that getattr-related
functions within zfs could be optimized based on the request_mask.

struct kstat includes new fields:
u32               result_mask;  /* What fields the user got */
u64               attributes;   /* See STATX_ATTR_* flags */
struct timespec   btime;        /* File creation time */

Fields attribute and btime are cleared; the result_mask reflects this.  These
appear to be optional based on simple_getattr() and vfs_getattr() within the
kernel, which take the same approach.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5875
2017-03-20 17:51:16 -07:00
Matthew Ahrens
9522bd2429 OpenZFS 7801 - add more by-dnode routines (lint)
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7801
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f25efb3
Closes #5894
2017-03-20 12:33:17 -07:00
Matthew Ahrens
8614ddf9b4 OpenZFS 6874 - rollback and receive need to reset ZPL state to what's on disk
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

When we do a clone swap (caused by "zfs rollback" or "zfs receive"), the
ZPL doesn't completely reload the state from the DMU; some values remain
cached in the zfsvfs_t.

OpenZFS-issue: https://www.illumos.org/issues/6874
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1fdcbd0
Closes #5888
2017-03-13 17:42:42 -07:00
Brian Behlendorf
1c2555ef92 Restructure mount option handling
Restructure the handling of mount options to be consistent with
upstream OpenZFS.  This required making the following changes.

- The zfs_mntopts_t was renamed vfs_t and adjusted to provide
  the minimal needed functionality.  This includes a pointer
  back to the associated zfsvfs_t.  Plus it made it possible
  to revert zfs_register_callbacks() and zfsvfs_create() back
  to their original prototypes.

- A zfs_mnt_t structure was added for the sole purpose of
  providing a structure to pass the osname and raw mount
  pointer to zfs_domount() without having to copy them.

- Mount option parsing was moved down from the zpl_* wrapper
  functions in to the zfs_* functions.  This allowed for the
  code to be simplied and it's where similar functionality
  appears on other platforms.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-10 09:51:41 -08:00
Brian Behlendorf
f298b24ddf Rename zfs_* functions
Several functions were renamed when ZFS was originally ported to
Linux.  Revert the code to the original names to minimize the
delta with upstream OpenZFS.

  zfs_sb_teardown -> zfsvfs_teardown
  zfs_sb_create -> zfsvfs_create
  zfs_sb_setup -> zfsvfs_setup
  zfs_sb_free -> zfsvfs_free
  get_zfs_sb -> getzfsvfs
  zfs_sb_hold -> zfsvfs_hold
  zfs_sb_rele -> zfsvfs_rele

  zfs_sb_prune_aliases  -> zfs_prune_aliases (Linux-only)
  zfs_sb_prune -> zfs_prune (Linux only)

Align the zfs_vnops.h and zfs_vfsops.h with upstream as much
as possible.  Several prototypes were removed and those that
remain were reordered.

Move the EXPORT_SYMBOL lines to the end of the source files
for consistency with the other source files.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-10 09:51:35 -08:00
Brian Behlendorf
0037b49e83 Rename zfs_sb_t -> zfsvfs_t
The use of zfs_sb_t instead of zfsvfs_t results in unnecessary
conflicts with the upstream source.  Change all instances of
zfs_sb_t to zfsvfs_t including updating the variables names.

Whenever possible the code was updated to be consistent with
hope it appears in the upstream OpenZFS source.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-10 09:51:33 -08:00
Brian Behlendorf
ef1bdf363c Fix ZVOL BLKFLSBUF ioctl
The BLKFLSBUF ioctl is expected to do two things:

  - flush dirty pages to stable storage, and
  - invalidate clean pages

Unfortunately, the existing implementation of BLKFLSBUF in
zvol_ioctl() only flushes pages which are part of the current
TXG to disk.  There may be additional dirty pages in the
page cache which haven't yet been submitted to the DMU and
therefore aren't part of any TXG.

Furthermore because zvol_ioctl() returns 0 the generic
blkdev_flushbuf() does not invalidate the page cache.

Resolve the issue by moving bdev_flush() in to zvol_ioctl()
and explicitly waiting for a full TXG sync.  Then invalidate
the page cache.  The associated ARC buffers need not be
evicted since they cannot be bypassed using O_DIRECT.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5871 
Closes #5879
2017-03-09 17:43:36 -08:00
Giuseppe Di Natale
589bb918ef Suppress cppcheck nullPointer error in zfs_write
Newer versions of cppcheck find the potential NULL pointer
bug in zfs_write(). The function is difficult to refactor without
extensive work, so suppress the potential NULL pointer error
which cannot occur for now.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5882
2017-03-09 17:40:21 -08:00
Chunwei Chen
9b77d1c958 Fix nfs snapdir automount
The current implementation for allowing nfs to access snapdir is very buggy.
It uses a special fh for snapdirs, such that the next time nfsd does
fh_to_dentry, it actually returns the root inode inside the snapshot. So nfsd
never knows it cross a mountpoint.

The problem is that nfsd will not hold a reference on the vfsmount of the
snapshot. This cause auto unmounter to unmount the snapshot even though nfs is
still holding dentries in it.

To fix this, we return the inode for the snapdirs themselves. However, we also
trigger automount upon fh_to_dentry, and return ESTALE so nfsd will revalidate
and see the mountpoint and do crossmnt.

Because nfsd will now be aware that these are different filesystems users
must add crossmnt to their export options to access snapshot directories.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #3794
Closes #4716
Closes #5810 
Closes #5833
2017-03-08 09:26:33 -08:00
Andriy Gapon
423e7b6261 OpenZFS 7867 - ARC space accounting leak
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7867
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aa1f740d
Closes #5874
2017-03-07 18:14:32 -08:00
Brian Behlendorf
3ec3bc2167 OpenZFS 7793 - ztest fails assertion in dmu_tx_willuse_space
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.

The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).

This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().

The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.

We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
logic attempted to predict what will be on disk when this txg syncs, to
know if the overwritten block will be freed (i.e. exists, and has no
snapshots).

OpenZFS-issue: https://www.illumos.org/issues/7793
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a
Upstream bugs: DLPX-32883a
Closes #5804 

Porting notes:
- DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(),
  Using the default dnode size would be slightly better.
- DEBUG_DMU_TX wrappers and configure option removed.
- Resolved _by_dnode() conflicts these changes have not yet been
  applied to OpenZFS.
2017-03-07 09:51:59 -08:00
Brian Behlendorf
e2fcb56275 OpenZFS 7843 - get_clones_stat() is suboptimal for lots of clones
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7843
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4d519e7
Closes #5868
2017-03-07 09:47:40 -08:00
Chunwei Chen
7a789346af Fix loop device becomes read-only
Commit 933ec99 removes read and write from f_op because the vfs layer will
select iter_write or aio_write automatically. However, for Linux <= 4.0,
loop_set_fd will actually check f_op->write and set read-only if not exists.
This patch add them back and use the generic do_sync_{read,write} for
aio_{read,write} and new_sync_{read,write} for {read,write}_iter.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #5776 
Closes #5855
2017-03-06 09:20:20 -08:00
Olaf Faaland
4859fe796c Linux 4.11 compat: avoid refcount_t name conflict
Linux 4.11 introduces a new type, refcount_t, which conflicts with the
type of the same name defined within ZFS.

Rename the ZFS type zfs_refcount_t.  Within the ZFS code, use a macro to
cause references to refcount_t to be changed to zfs_refcount_t at
compile time.  This reduces conflicts when later landing OpenZFS
patches.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5823 
Closes #5842
2017-02-28 16:10:18 -08:00
Matthew Ahrens
66eead53c9 Clean up by-dnode code in dmu_tx.c
0eef1bde31
introduced some changes which we slightly improved the style of when
porting to illumos.

There is also one minor error-handling fix, in zap_add() the "zap" may
become NULL in case of an error re-opening the ZAP.

Originally suggested at: https://github.com/openzfs/openzfs/pull/276

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #5805
2017-02-24 13:34:26 -08:00
Isaac Huang
f7e76821c5 ABD style cleanups
The commit a6255b7fce removed a few
assertions which help catch errors and improve code readability. It also
duplicated two conditionals, which was unnecessary and made the code
confusing to read. This patch cleans it up.

Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes #5802
2017-02-24 12:05:42 -08:00
Daniel Hoffman
9e2c3bb4b9 OpenZFS 7812 - Remove gender specific language
Authored by: Daniel Hoffman <dj.hoffman@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

This change removes all gendered language that did not refer specifically
to an individual person or pet. The convention taken was to use
variations on "they" when referring to users and/or human beings, while
using "it" when referring to code, functions, and/or libraries.
Additionally, we took the liberty to fix up any whitespace issues that
were found in any files that were already being modified.

OpenZFS-issue: https://www.illumos.org/issues/7812
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ad626db
Closes #5822
2017-02-24 11:07:04 -08:00
Andriy Gapon
0efd97912a OpenZFS 7199 - dsl_dataset_rollback_sync may try to free already free blocks
7200 no blocks must be born in a txg after a snaphot is created
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7199
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/bfaed0b
Closes #5817
2017-02-24 11:05:33 -08:00
Isaac Huang
6d82f98c3d Fix incorrect spare vdev state after replacing
After a hot spare replaces an OFFLINE vdev, the new
parent spare vdev state is set incorrectly to OFFLINE.
The correct state should be DEGRADED. The incorrect
OFFLINE state will prevent top-level vdev from reading
the spare vdev, thus causing unnecessary reconstruction.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes #5766 
Closes #5770
2017-02-23 10:32:15 -08:00
Matthew Ahrens
c30e58c462 zfs_arc_num_sublists_per_state should be common to all multilists
The global tunable zfs_arc_num_sublists_per_state is used by the ARC and
the dbuf cache, and other users are planned. We should change this
tunable to be common to all multilists.  This tuning may be overridden
on a per-multilist basis.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #5764
2017-02-15 15:49:33 -08:00
Tim Chase
544596c59e Fix zfs_compressed_arc_enabled parameter description
A likely cut/paste error caused the description to be applied to
zfs_arc_average_blocksize.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #5788
2017-02-13 10:59:05 -08:00
Chunwei Chen
d6df043c53 Fix off by one in zpl_lookup
Doing the following command would return success with zfs creating an orphan
object.

	touch $(for i in $(seq 256); do printf "n"; done)

The funny thing is that this will only work once for each directory, because
after upgraded to fzap, zfs_lookup would fail properly since it has additional
length check.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5768
2017-02-11 12:42:17 -08:00
Matthew Ahrens
d7958b4cda OpenZFS 7104 - increase indirect block size
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7104
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4b5c8e9
Closes #5679
2017-02-09 10:27:02 -08:00
Matthew Ahrens
df7eeccc75 panic in bpobj_space(): null pointer dereference
This is a race condition in the deadlist code.

A thread executing an administrative command that uses
dsl_deadlist_space_range() holds the lock of the whole deadlist_t to
protect the access of all its entries that the deadlist contains in an
avl tree.

Sync threads trying to insert a new entry in the deadlist (through
dsl_deadlist_insert() -> dle_enqueue()) do not hold the deadlist lock at
that moment.  If the dle_bpobj is the empty bpobj (our sentinel value),
we close and reopen it.  Between these two operations, it is possible
for the dsl_deadlist_space_range() thread to dereference that bpobj
which is NULL during that window.

Threads should hold the a deadlist's dl_lock when they manipulate its
internal data so scenarios like the one above are avoided.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #5762
2017-02-09 10:19:12 -08:00
Brian Behlendorf
ea7e86d8db Fix iput() calls within a tx
As explicitly stated in section 2 of the 'Programming rules'
comments at the top of zfs_vnops.c.

  If you must call iput() within a tx then use zfs_iput_async().

Move iput() calls after dmu_tx_commit() / dmu_tx_abort when
possible.  When not possible convert the iput() calls to
zfs_iput_async().

Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5758
2017-02-08 17:28:22 -08:00
Matthew Ahrens
4a5d7f8267 Allow c99 code to compile
Add the appropriate compiler flags to accept c99 code.  This will help to
minimize differences with upstream, and aid porting changes.  One change was
necessary in zvol.c because the DEFINE_IDA() macro does not work with the new
compiler flags.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #5756
2017-02-08 09:27:48 -08:00
David Quigley
bef78122e6 Add missing module_param for zfs_per_txg_dirty_frees_percent
When the code was added this tunable was not exposed via module params. Also it
was not documented. This patch changes the type from a uint32 to a ulong as
done with other percentage tunables and also documents it in the
zfs-module-parameters man page.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes #5750
2017-02-07 09:44:03 -08:00
George Melikov
298ec40b6d OpenZFS 7448 - ZFS doesn't notice when disk vdevs have no write cache
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Dan Fields <dan.fields@nexenta.com>
Reviewed by: Alek Pinchuk <alek.pinchuk@nexenta.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7448
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/295438b
Closes #5737
2017-02-04 09:23:50 -08:00
George Melikov
0a252daed3 OpenZFS 7504 - kmem_reap hangs spa_sync and administrative tasks
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7504
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/405a5a0
Closes #5736
2017-02-04 09:21:25 -08:00
George Melikov
2e0e443ac4 OpenZFS 7247 - zfs receive of deduplicated stream fails
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7247
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ad25b4
Closes #5689 

Porting notes:
- tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_013_pos.ksh
  renamed as zfs_receive_015_pos.ksh, zfs_receive_013_pos.ksh is now
  used for OpenZFS test.
- libzfs_sendrecv.c: SMALLEST_POSSIBLE_MAX_DDT_MB is always used
  for all 32-bit builds.
2017-02-04 09:10:24 -08:00
George Melikov
9b7b9cd370 OpenZFS 1300 - filename normalization doesn't work for removes
Authored by: Kevin Crowe <kevin.crowe@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/1300
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8f1750d
Closes #5725 

Porting notes:
- zap_micro.c: all `MT_EXACT` are replaced by `0`
2017-02-02 14:13:41 -08:00
Chunwei Chen
c7af63d62a Fix write(2) returns zero bug from 933ec99
For generic_write_checks with 2 args, we can exit when it returns zero because
it means count is zero. However this is not the case for generic_write_checks
with 4 args, where zero means no error.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #5720 
Closes #5726
2017-02-02 09:43:42 -08:00
Giuseppe Di Natale
fc386db191 Remove lint ifdef checks in zdb and dbuf
This is effectively dead code for the Linux implementation which can
be removed to improve readability.  We want to linter to check the
real production/debug build as much as possible.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5722
2017-02-01 16:47:04 -08:00
George Melikov
0f676dc228 OpenZFS 7072 - zfs fails to expand if lun added when os is in shutdown state
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7072
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c39a2aa
Closes #5694 

Porting notes:
- vdev.c: 'vdev_get_stats' changes are moved to 'vdev_get_stats_ex'.
- vdev_disk.c: ignored, Linux specific code is different.
2017-02-01 13:14:02 -08:00
David Quigley
2fe36b0bfb Use fletcher_4 routines natively with abd_iterate_func()
This patch adds the necessary infrastructure for ABD to make use
of the vectorized fletcher 4 routines.

- export ABD compatible interface from fletcher_4
- add ABD fletcher_4 tests for data and metadata ABD types.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Original-patch-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes #5589
2017-02-01 09:34:22 -08:00
George Melikov
539d33c791 OpenZFS 6569 - large file delete can starve out write ops
Authored by: Alek Pinchuk <alek@nexenta.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
Tested-by: kernelOfTruth <kerneloftruth@gmail.com>

OpenZFS-issue: https://www.illumos.org/issues/6569
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1bf4b6f2
Closes #5706
2017-01-31 14:44:03 -08:00
Giuseppe Di Natale
d69a321e56 OpenZFS 7545 - zdb should disable reference tracking
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes: Moved reference_tracking_enable and
reference_history outside of ZFS_DEBUG.

OpenZFS-issue: https://www.illumos.org/issues/7545
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4dd77f9
Closes #5701
2017-01-31 14:36:35 -08:00