Commit Graph

42 Commits

Author SHA1 Message Date
chenqiuhao1997
41ae864b69
Replace P2ALIGN with P2ALIGN_TYPED and delete P2ALIGN.
In P2ALIGN, the result would be incorrect when align is unsigned
integer and x is larger than max value of the type of align.
In that case, -(align) would be a positive integer, which means
high bits would be zero and finally stay zero after '&' when
align is converted to a larger integer type.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Qiuhao Chen <chenqiuhao1997@gmail.com>
Closes #15940
2024-05-10 08:47:21 -07:00
Brooks Davis
7e52795aad
ztest: use ASSERT3P to compare pointers
With a sufficiently modern gcc (I saw this with gcc13), gcc complains
when casting pointers to an integer of a different type (even a larger
one).  On 32-bt ASSERT3U does this on 32-bit systems by casting a 32-bit
pointer to uint64_t so use ASSERT3P which uses uintptr_t.

Fixes: 5caeef02fa RAID-Z expansion feature

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes #16115
2024-04-22 10:48:58 -07:00
George Wilson
b1e46f869e
Add ashift validation when adding devices to a pool
Currently, zpool add allows users to add top-level vdevs that have
different ashifts but doing so prevents users from being able to
perform a top-level vdev removal. Often times consumers may not realize
that they have mismatched ashifts until the top-level removal fails.

This feature adds ashift validation to the zpool add command and will
fail the operation if the sector size of the specified vdev does not
match the existing pool. This behavior can be disabled by using the -f
flag. In addition, new flags have been added to provide fine-grained
control to disable specific checks. These flags
are:

--allow-in-use
--allow-ashift-mismatch
--allow-replicaton-mismatch

The force flag will disable all of these checks.

Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Maybee <mmaybee@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes #15509
2024-03-29 13:15:56 -06:00
Don Brady
5caeef02fa
RAID-Z expansion feature
This feature allows disks to be added one at a time to a RAID-Z group,
expanding its capacity incrementally.  This feature is especially useful
for small pools (typically with only one RAID-Z group), where there
isn't sufficient hardware to add capacity by adding a whole new RAID-Z
group (typically doubling the number of disks).

== Initiating expansion ==

A new device (disk) can be attached to an existing RAIDZ vdev, by
running `zpool attach POOL raidzP-N NEW_DEVICE`, e.g. `zpool attach tank
raidz2-0 sda`.  The new device will become part of the RAIDZ group.  A
"raidz expansion" will be initiated, and the new device will contribute
additional space to the RAIDZ group once the expansion completes.

The `feature@raidz_expansion` on-disk feature flag must be `enabled` to
initiate an expansion, and it remains `active` for the life of the pool.
In other words, pools with expanded RAIDZ vdevs can not be imported by
older releases of the ZFS software.

== During expansion ==

The expansion entails reading all allocated space from existing disks in
the RAIDZ group, and rewriting it to the new disks in the RAIDZ group
(including the newly added device).

The expansion progress can be monitored with `zpool status`.

Data redundancy is maintained during (and after) the expansion.  If a
disk fails while the expansion is in progress, the expansion pauses
until the health of the RAIDZ vdev is restored (e.g. by replacing the
failed disk and waiting for reconstruction to complete).

The pool remains accessible during expansion.  Following a reboot or
export/import, the expansion resumes where it left off.

== After expansion ==

When the expansion completes, the additional space is available for use,
and is reflected in the `available` zfs property (as seen in `zfs list`,
`df`, etc).

Expansion does not change the number of failures that can be tolerated
without data loss (e.g. a RAIDZ2 is still a RAIDZ2 even after
expansion).

A RAIDZ vdev can be expanded multiple times.

After the expansion completes, old blocks remain with their old
data-to-parity ratio (e.g. 5-wide RAIDZ2, has 3 data to 2 parity), but
distributed among the larger set of disks.  New blocks will be written
with the new data-to-parity ratio (e.g. a 5-wide RAIDZ2 which has been
expanded once to 6-wide, has 4 data to 2 parity).  However, the RAIDZ
vdev's "assumed parity ratio" does not change, so slightly less space
than is expected may be reported for newly-written blocks, according to
`zfs list`, `df`, `ls -s`, and similar tools.

Sponsored-by: The FreeBSD Foundation
Sponsored-by: iXsystems, Inc.
Sponsored-by: vStack
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Authored-by: Matthew Ahrens <mahrens@delphix.com>
Contributions-by: Fedor Uporov <fuporov.vstack@gmail.com>
Contributions-by: Stuart Maybee <stuart.maybee@comcast.net>
Contributions-by: Thorsten Behrens <tbehrens@outlook.com>
Contributions-by: Fmstrat <nospam@nowsci.com>
Contributions-by: Don Brady <dev.fs.zfs@gmail.com>
Signed-off-by: Don Brady <dev.fs.zfs@gmail.com>
Closes #15022
2023-11-08 10:19:41 -08:00
Paul Dagnelie
2e2a46e0a5
Invoke zdb by guid to avoid import errors
The problem that was occurring is basically that a device was removed 
by ztest and replaced with another device. It was then reguided. The 
import then failed because there were two possible imports with the 
same name; one with the new guid, and one with the old. This can 
happen because the label writes from the device removal/replacement 
can be subject to ztest's error injection. 

The other ways to fix this would be to change the error injection to 
not trigger on removals (which may not be technically feasible), or 
to change the import code to not report configurations that are so 
short on devices (which would potentially have unpleasant end-user 
effects when trying to recover from data losses/device configuration 
issues).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15298
2023-09-22 16:08:51 -07:00
Alexander Motin
e5d70f4677
ZIL: Avoid dbuf_read() in ztest_get_data()
While working on similar patches for zfs and zvol in #15153 I've
forgot about ztest.  Update it also so that we test the same code
paths as use in production.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15301
2023-09-21 18:40:13 -07:00
Paul Dagnelie
2076011e0c
Fix incorrect expected error in ztest
There is an occasional ztest failure that looks like ztest: attach 
(/var/tmp/zloop-run/ztest.13a 570425344, draid1-1-0 532152320, 1) 
returned 22, expected 95. This is because the value that we return 
is EINVAL, but expected_error is set incorrectly.

Change the expected_error value to match both the comment and the 
actual error value.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15295
2023-09-19 09:02:23 -07:00
Alexander Motin
eda3fcd56f
ZIL: Second attempt to reduce scope of zl_issuer_lock.
The previous patch #14841 appeared to have significant flaw, causing
deadlocks if zl_get_data callback got blocked waiting for TXG sync.  I
already handled some of such cases in the original patch, but issue
 #14982 shown cases that were impossible to solve in that design.

This patch fixes the problem by postponing log blocks allocation till
the very end, just before the zios issue, leaving nothing blocking after
that point to cause deadlocks.  Before that point though any sleeps are
now allowed, not causing sync thread blockage.  This require slightly
more complicated lwb state machine to allocate blocks and issue zios
in proper order.  But with removal of special early issue workarounds
the new code is much cleaner now, and should even be more efficient.

Since this patch uses null zios between write, I've found that null
zios do not wait for logical children ready status in zio_ready(),
that makes parent write to proceed prematurely, producing incorrect
log blocks.  Added ZIO_CHILD_LOGICAL_BIT to zio_wait_for_children()
fixes it.

Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15122
2023-08-24 17:08:49 -07:00
Pawel Jakub Dawidek
67a1b03791
Implementation of block cloning for ZFS
Block Cloning allows to manually clone a file (or a subset of its
blocks) into another (or the same) file by just creating additional
references to the data blocks without copying the data itself.
Those references are kept in the Block Reference Tables (BRTs).

The whole design of block cloning is documented in module/zfs/brt.c.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #13392
2023-03-10 11:59:53 -08:00
Richard Yao
bc4d210783
Fix memory leak in ztest
This is tripping LeakSanitizer, which causes zloop test failures on pull
requests.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14583
2023-03-06 15:30:29 -08:00
Tino Reichardt
f9f9bef22f Update BLAKE3 for using the new impl handling
This commit changes the BLAKE3 implementation handling and
also the calls to it from the ztest command.

Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13741
2023-03-02 13:52:27 -08:00
Brian Behlendorf
0c8fbe5b6a ztest: update ztest_dmu_snapshot_create_destroy()
ECHRNG is returned when the channel program encounters a runtime
error.  For example, this can happen when a snapshot doesn't exist.
We handle this error the same way as the existing EEXIST and ENOENT
error checks.

Additionally, improve the internal debug message to include the
error describing why a pool couldn't be opened.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14351
2023-01-10 13:27:48 -08:00
Brian Behlendorf
549aafb7c8 ztest: ztest_dsl_prop_set_uint64() ENOSPC consistency
It is possible for ztest_dsl_prop_set_uint64() to fail with ENOSPC
and this needs to be handled consistently.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14351
2023-01-10 13:27:48 -08:00
Brian Behlendorf
f7788883ab ztest: reduce zpool split frequency
There's no need to so aggressively test splitting a pool.  Reduce
the occurence of this test to once every 10 seconds.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14351
2023-01-10 13:27:48 -08:00
Brian Behlendorf
4208a052c2 ztest: update expectation for sparing a special device
Commit c23738c70e modified the expected
behavior of attach to prevent hot spares from being used as special
vdev replacements.  We update ztest's expectations accordingly to
prevent it from failing when testing the updated behavior.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14351
2023-01-10 13:26:44 -08:00
Matthew Ahrens
018f26041d
deadlock between spa_errlog_lock and dp_config_rwlock
There is a lock order inversion deadlock between `spa_errlog_lock` and
`dp_config_rwlock`:

A thread in `spa_delete_dataset_errlog()` is running from a sync task.
It is holding the `dp_config_rwlock` for writer (see
`dsl_sync_task_sync()`), and waiting for the `spa_errlog_lock`.

A thread in `dsl_pool_config_enter()` is holding the `spa_errlog_lock`
(see `spa_get_errlog_size()`) and waiting for the `dp_config_rwlock` (as
reader).

Note that this was introduced by #12812.

This commit address this by defining the lock ordering to be
dp_config_rwlock first, then spa_errlog_lock / spa_errlist_lock.
spa_get_errlog() and spa_get_errlog_size() can acquire the locks in this
order, and then process_error_block() and get_head_and_birth_txg() can
verify that the dp_config_rwlock is already held.

Additionally, a buffer overrun in `spa_get_errlog()` is corrected.  Many
code paths didn't check if `*count` got to zero, instead continuing to
overwrite past the beginning of the userspace buffer at `uaddr`.

Tested by having some errors in the pool (via `zinject -t data
/path/to/file`), one thread running `zpool iostat 0.001`, and another
thread runs `zfs destroy` (in a loop, although it hits the first time).
This reproduces the problem easily without the fix, and works with the
fix.

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #14239
Closes #14289
2022-12-22 11:48:49 -08:00
Richard Yao
2709ace096 ztest: comparisons against errno should not assign to it
888914486e introduced this regression.

I used cscope to verify that there are no other instances of this in the
codebase. This is the one of the few bugs that are extremely easy to
identify using cscope.

Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14264
2022-12-08 14:15:04 -08:00
Richard Yao
f47f6a055d
Address warnings about possible division by zero from clangsa
* The complaint in ztest_replay_write() is only possible if something
   went horribly wrong. An assertion will silence this and if it goes
   off, we will know that something is wrong.
 * The complaint in spa_estimate_metaslabs_to_flush() is not impossible,
   but seems very unlikely. We resolve this by passing the value from
   the `MIN()` that does not go to infinity when the variable is zero.

There was a third report from Clang's scan-build, but that was a
definite false positive and disappeared when checked again through
Clang's static analyzer with Z3 refution via CodeChecker.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14124
2022-11-03 09:58:14 -07:00
Aleksa Sarai
dbf6108b4d zfs_rename: support RENAME_* flags
Implement support for Linux's RENAME_* flags (for renameat2). Aside from
being quite useful for userspace (providing race-free ways to exchange
paths and implement mv --no-clobber), they are used by overlayfs and are
thus required in order to use overlayfs-on-ZFS.

In order for us to represent the new renameat2(2) flags in the ZIL, we
create two new transaction types for the two flags which need
transactional-level support (RENAME_EXCHANGE and RENAME_WHITEOUT).
RENAME_NOREPLACE does not need any ZIL support because we know that if
the operation succeeded before creating the ZIL entry, there was no file
to be clobbered and thus it can be treated as a regular TX_RENAME.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Closes #12209
Closes #14070
2022-10-28 09:49:20 -07:00
Tino Reichardt
27218a32fc
Fix declarations of non-global variables
This patch inserts the `static` keyword to non-global variables,
which where found by the analysis tool smatch.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13970
2022-10-18 11:05:32 -07:00
Richard Yao
ab8d9c1783 Cleanup: 64-bit kernel module parameters should use fixed width types
Various module parameters such as `zfs_arc_max` were originally
`uint64_t` on OpenSolaris/Illumos, but were changed to `unsigned long`
for Linux compatibility because Linux's kernel default module parameter
implementation did not support 64-bit types on 32-bit platforms. This
caused problems when porting OpenZFS to Windows because its LLP64 memory
model made `unsigned long` a 32-bit type on 64-bit, which created the
undesireable situation that parameters that should accept 64-bit values
could not on 64-bit Windows.

Upon inspection, it turns out that the Linux kernel module parameter
interface is extensible, such that we are allowed to define our own
types. Rather than maintaining the original type change via hacks to to
continue shrinking module parameters on 32-bit Linux, we implement
support for 64-bit module parameters on Linux.

After doing a review of all 64-bit kernel parameters (found via the man
page and also proposed changes by Andrew Innes), the kernel module
parameters fell into a few groups:

Parameters that were originally 64-bit on Illumos:

 * dbuf_cache_max_bytes
 * dbuf_metadata_cache_max_bytes
 * l2arc_feed_min_ms
 * l2arc_feed_secs
 * l2arc_headroom
 * l2arc_headroom_boost
 * l2arc_write_boost
 * l2arc_write_max
 * metaslab_aliquot
 * metaslab_force_ganging
 * zfetch_array_rd_sz
 * zfs_arc_max
 * zfs_arc_meta_limit
 * zfs_arc_meta_min
 * zfs_arc_min
 * zfs_async_block_max_blocks
 * zfs_condense_max_obsolete_bytes
 * zfs_condense_min_mapping_bytes
 * zfs_deadman_checktime_ms
 * zfs_deadman_synctime_ms
 * zfs_initialize_chunk_size
 * zfs_initialize_value
 * zfs_lua_max_instrlimit
 * zfs_lua_max_memlimit
 * zil_slog_bulk

Parameters that were originally 32-bit on Illumos:

 * zfs_per_txg_dirty_frees_percent

Parameters that were originally `ssize_t` on Illumos:

 * zfs_immediate_write_sz

Note that `ssize_t` is `int32_t` on 32-bit and `int64_t` on 64-bit. It
has been upgraded to 64-bit.

Parameters that were `long`/`unsigned long` because of Linux/FreeBSD
influence:

 * l2arc_rebuild_blocks_min_l2size
 * zfs_key_max_salt_uses
 * zfs_max_log_walking
 * zfs_max_logsm_summary_length
 * zfs_metaslab_max_size_cache_sec
 * zfs_min_metaslabs_to_flush
 * zfs_multihost_interval
 * zfs_unflushed_log_block_max
 * zfs_unflushed_log_block_min
 * zfs_unflushed_log_block_pct
 * zfs_unflushed_max_mem_amt
 * zfs_unflushed_max_mem_ppm

New parameters that do not exist in Illumos:

 * l2arc_trim_ahead
 * vdev_file_logical_ashift
 * vdev_file_physical_ashift
 * zfs_arc_dnode_limit
 * zfs_arc_dnode_limit_percent
 * zfs_arc_dnode_reduce_percent
 * zfs_arc_meta_limit_percent
 * zfs_arc_sys_free
 * zfs_deadman_ziotime_ms
 * zfs_delete_blocks
 * zfs_history_output_max
 * zfs_livelist_max_entries
 * zfs_max_async_dedup_frees
 * zfs_max_nvlist_src_size
 * zfs_rebuild_max_segment
 * zfs_rebuild_vdev_limit
 * zfs_unflushed_log_txg_max
 * zfs_vdev_max_auto_ashift
 * zfs_vdev_min_auto_ashift
 * zfs_vnops_read_chunk_size
 * zvol_max_discard_blocks

Rather than clutter the lists with commentary, the module parameters
that need comments are repeated below.

A few parameters were defined in Linux/FreeBSD specific code, where the
use of ulong/long is not an issue for portability, so we leave them
alone:

 * zfs_delete_blocks
 * zfs_key_max_salt_uses
 * zvol_max_discard_blocks

The documentation for a few parameters was found to be incorrect:

 * zfs_deadman_checktime_ms - incorrectly documented as int
 * zfs_delete_blocks - not documented as Linux only
 * zfs_history_output_max - incorrectly documented as int
 * zfs_vnops_read_chunk_size - incorrectly documented as long
 * zvol_max_discard_blocks - incorrectly documented as ulong

The documentation for these has been fixed, alongside the changes to
document the switch to fixed width types.

In addition, several kernel module parameters were percentages or held
ashift values, so being 64-bit never made sense for them. They have been
downgraded to 32-bit:

 * vdev_file_logical_ashift
 * vdev_file_physical_ashift
 * zfs_arc_dnode_limit_percent
 * zfs_arc_dnode_reduce_percent
 * zfs_arc_meta_limit_percent
 * zfs_per_txg_dirty_frees_percent
 * zfs_unflushed_log_block_pct
 * zfs_vdev_max_auto_ashift
 * zfs_vdev_min_auto_ashift

Of special note are `zfs_vdev_max_auto_ashift` and
`zfs_vdev_min_auto_ashift`, which were already defined as `uint64_t`,
and passed to the kernel as `ulong`. This is inherently buggy on big
endian 32-bit Linux, since the values would not be written to the
correct locations. 32-bit FreeBSD was unaffected because its sysctl code
correctly treated this as a `uint64_t`.

Lastly, a code comment suggests that `zfs_arc_sys_free` is
Linux-specific, but there is nothing to indicate to me that it is
Linux-specific. Nothing was done about that.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Original-patch-by: Andrew Innes <andrew.c12@gmail.com>
Original-patch-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13984
Closes #14004
2022-10-13 10:03:29 -07:00
Richard Yao
72c99dc959
Handle possible null pointers from malloc/strdup/strndup()
GCC 12.1.1_p20220625's static analyzer caught these.

Of the two in the btree test, one had previously been caught by Coverity
and Smatch, but GCC flagged it as a false positive. Upon examining how
other test cases handle this, the solution was changed from
`ASSERT3P(node, !=, NULL);` to using `perror()` to be consistent with
the fixes to the other fixes done to the ZTS code.

That approach was also used in ZED since I did not see a better way of
handling this there. Also, upon inspection, additional unchecked
pointers from malloc()/calloc()/strdup() were found in ZED, so those
were handled too.

In other parts of the code, the existing methods to avoid issues from
memory allocators returning NULL were used, such as using
`umem_alloc(size, UMEM_NOFAIL)` or returning `ENOMEM`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13979
2022-10-06 17:18:40 -07:00
Umer Saleem
d9ac17a57f Expose libzutil error info in libpc_handle_t
In libzutil, for zpool_search_import and zpool_find_config, we use
libpc_handle_t internally, which does not maintain error code and it is
not exposed in the interface. Due to this, the error information is not
propagated to the caller. Instead, an error message is printed on
stderr.

This commit adds lpc_error field in libpc_handle_t and exposes it in
the interface, which can be used by the users of libzutil to get the
appropriate error information and handle it accordingly.

Users of the API can also control if they want to print the error
message on stderr.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #13969
2022-10-04 09:54:35 -07:00
Richard Yao
67395be0c2
Fix userland dereference NULL return value bugs
* `zstream_do_token()` does not handle failures from `libzfs_init()`

 * `ztest_global_vars_to_zdb_args()` does not handle failures from
   `calloc()`.

 * `zfs_snapshot_nvl()` will pass an offset to a NULL pointer as a
   source to `strlcpy()` if the provided nvlist is `NULL`.

We handle these by doing what the existing error handling does for other
errors involving these functions.

Coverity complained about these. It had complained about several more,
but one was fixed by 570ca4441e and
another was a false positive. The remaining complaints labelled
"dereferece null return vaue" involve fetching things stored in
in-kernel data structures via `list_head()/list_next()`,
`AVL_PREV()/AVL_NEXT()` and `zfs_btree_find()`. Most of them occur in
void functions that have no error handling. They are much harder to
analyze than the two fixed in this patch, so they are left for a
follow-up patch.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13971
2022-09-30 17:02:57 -07:00
Ameer Hamza
55c12724d3
zed: mark disks as REMOVED when they are removed
ZED does not take any action for disk removal events if there is no
spare VDEV available. Added zpool_vdev_remove_wanted() in libzfs
and vdev_remove_wanted() in vdev.c to remove the VDEV through ZED
on removal event.  This means that if you are running zed and
remove a disk, it will be properly marked as REMOVED.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #13797
2022-09-28 09:48:46 -07:00
Richard Yao
a51288aabb
Fix unsafe string operations
Coverity caught unsafe use of `strcpy()` in `ztest_dmu_objset_own()`,
`nfs_init_tmpfile()` and `dump_snapshot()`. It also caught an unsafe use
of `strlcat()` in `nfs_init_tmpfile()`.

Inspired by this, I did an audit of every single usage of `strcpy()` and
`strcat()` in the code. If I could not prove that the usage was safe, I
changed the code to use either `strlcpy()` or `strlcat()`, depending on
which function was originally used. In some cases, `snprintf()` was used
to replace multiple uses of `strcat` because it was cleaner.

Whenever I changed a function, I preferred to use `sizeof(dst)` when the
compiler is able to provide the string size via that. When it could not
because the string was passed by a caller, I checked the entire call
tree of the function to find out how big the buffer was and hard coded
it. Hardcoding is less than ideal, but it is safe unless someone shrinks
the buffer sizes being passed.

Additionally, Coverity reported three more string related issues:

 * It caught a case where we do an overlapping memory copy in a call to
   `snprintf()`. We fix that via `kmem_strdup()` and `kmem_strfree()`.

 * It caught `sizeof (buf)` being used instead of `buflen` in
   `zdb_nicenum()`'s call to `zfs_nicenum()`, which is passed to
   `snprintf()`. We change that to pass `buflen`.

 * It caught a theoretical unterminated string passed to `strcmp()`.
   This one is likely a false positive, but we have the information
   needed to do this more safely, so we change this to silence the false
   positive not just in coverity, but potentially other static analysis
   tools too. We switch to `strncmp()`.

 * There was a false positive in tests/zfs-tests/cmd/dir_rd_update.c. We
   suppress it by switching to `snprintf()` since other static analysis
   tools might complain about it too. Interestingly, there is a possible
   real bug there too, since it assumes that the passed directory path
   ends with '/'. We add a '/' to fix that potential bug.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13913
2022-09-27 16:47:24 -07:00
Richard Yao
fdc2d30371
Cleanup: Specify unsignedness on things that should not be signed
In #13871, zfs_vdev_aggregation_limit_non_rotating and
zfs_vdev_aggregation_limit being signed was pointed out as a possible
reason not to eliminate an unnecessary MAX(unsigned, 0) since the
unsigned value was assigned from them.

There is no reason for these module parameters to be signed and upon
inspection, it was found that there are a number of other module
parameters that are signed, but should not be, so we make them unsigned.
Making them unsigned made it clear that some other variables in the code
should also be unsigned, so we also make those unsigned. This prevents
users from setting negative values that could potentially cause bad
behaviors. It also makes the code slightly easier to understand.

Mostly module parameters that deal with timeouts, limits, bitshifts and
percentages are made unsigned by this. Any that are boolean are left
signed, since whether booleans should be considered signed or unsigned
does not matter.

Making zfs_arc_lotsfree_percent unsigned caused a
`zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was
removed. Removing the check was also necessary to prevent a compiler
error from -Werror=type-limits.

Several end of line comments had to be moved to their own lines because
replacing int with uint_t caused us to exceed the 80 character limit
enforced by cstyle.pl.

The following were kept signed because they are passed to
taskq_create(), which expects signed values and modifying the
OpenSolaris/Illumos DDI is out of scope of this patch:

	* metaslab_load_pct
	* zfs_sync_taskq_batch_pct
	* zfs_zil_clean_taskq_nthr_pct
	* zfs_zil_clean_taskq_minalloc
	* zfs_zil_clean_taskq_maxalloc
	* zfs_arc_prune_task_threads

Also, negative values in those parameters was found to be harmless.

The following were left signed because either negative values make
sense, or more analysis was needed to determine whether negative values
should be disallowed:

	* zfs_metaslab_switch_threshold
	* zfs_pd_bytes_max
	* zfs_livelist_min_percent_shared

zfs_multihost_history was made static to be consistent with other
parameters.

A number of module parameters were marked as signed, but in reality
referenced unsigned variables. upgrade_errlog_limit is one of the
numerous examples. In the case of zfs_vdev_async_read_max_active, it was
already uint32_t, but zdb had an extern int declaration for it.

Interestingly, the documentation in zfs.4 was right for
upgrade_errlog_limit despite the module parameter being wrongly marked,
while the documentation for zfs_vdev_async_read_max_active (and friends)
was wrong. It was also wrong for zstd_abort_size, which was unsigned,
but was documented as signed.

Also, the documentation in zfs.4 incorrectly described the following
parameters as ulong when they were int:

	* zfs_arc_meta_adjust_restarts
	* zfs_override_estimate_recordsize

They are now uint_t as of this patch and thus the man page has been
updated to describe them as uint.

dbuf_state_index was left alone since it does nothing and perhaps should
be removed in another patch.

If any module parameters were missed, they were not found by `grep -r
'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed,
but only because they were in files that had hits.

This patch intentionally did not attempt to address whether some of
these module parameters should be elevated to 64-bit parameters, because
the length of a long on 32-bit is 32-bit.

Lastly, it was pointed out during review that uint_t is a better match
for these variables than uint32_t because FreeBSD kernel parameter
definitions are designed for uint_t, whose bit width can change in
future memory models.  As a result, we change the existing parameters
that are uint32_t to use uint_t.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13875
2022-09-27 16:42:41 -07:00
Richard Yao
7584fbe846
Cleanup: Switch to strlcpy from strncpy
Coverity found a bug in `zfs_secpolicy_create_clone()` where it is
possible for us to pass an unterminated string when `zfs_get_parent()`
returns an error. Upon inspection, it is clear that using `strlcpy()`
would have avoided this issue.

Looking at the codebase, there are a number of other uses of `strncpy()`
that are unsafe and even when it is used safely, switching to
`strlcpy()` would make the code more readable. Therefore, we switch all
instances where we use `strncpy()` to use `strlcpy()`.

Unfortunately, we do not portably have access to `strlcpy()` in
tests/zfs-tests/cmd/zfs_diff-socket.c because it does not link to
libspl. Modifying the appropriate Makefile.am to try to link to it
resulted in an error from the naming choice used in the file. Trying to
disable the check on the file did not work on FreeBSD because Clang
ignores `#undef` when a definition is provided by `-Dstrncpy(...)=...`.
We workaround that by explictly including the C file from libspl into
the test. This makes things build correctly everywhere.

We add a deprecation warning to `config/Rules.am` and suppress it on the
remaining `strncpy()` usage. `strlcpy()` is not portably avaliable in
tests/zfs-tests/cmd/zfs_diff-socket.c, so we use `snprintf()` there as a
substitute.

This patch does not tackle the related problem of `strcpy()`, which is
even less safe. Thankfully, a quick inspection found that it is used far
more correctly than strncpy() was used. A quick inspection did not find
any problems with `strcpy()` usage outside of zhack, but it should be
said that I only checked around 90% of them.

Lastly, some of the fields in kstat_t varied in size by 1 depending on
whether they were in userspace or in the kernel. The origin of this
discrepancy appears to be 04a479f706 where
it was made for no apparent reason. It conflicts with the comment on
KSTAT_STRLEN, so we shrink the kernel field sizes to match the userspace
field sizes.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13876
2022-09-27 16:35:29 -07:00
Richard Yao
2a493a4c71
Fix unchecked return values and unused return values
Coverity complained about unchecked return values and unused values that
turned out to be unused return values.

Different approaches were used to handle the different cases of
unchecked return values:

* cmd/zdb/zdb.c: VERIFY0 was used in one place since the existing code
  had no error handling. An error message was printed in another to
  match the rest of the code.

* cmd/zed/agents/zfs_retire.c: We dismiss the return value with `(void)`
  because the value is expected to be potentially unset.

* cmd/zpool_influxdb/zpool_influxdb.c: We dismiss the return value with
  `(void)` because the values are expected to be potentially unset.

* cmd/ztest.c: VERIFY0 was used since we want failures if something goes
  wrong in ztest.

* module/zfs/dsl_dir.c: We dismiss the return value with `(void)`
  because there is no guarantee that the zap entry will always be there.
  For example, old pools imported readonly would not have it and we do
  not want to fail here because of that.

* module/zfs/zfs_fm.c: `fnvlist_add_*()` was used since the
  allocations sleep and thus can never fail.

* module/zfs/zvol.c: We dismiss the return value with `(void)` because
  we do not need it. This matches what is already done in the analogous
  `zfs_replay_write2()`.

* tests/zfs-tests/cmd/draid.c: We suppress one return value with
  `(void)` since the code handles errors already. The other return value
  is handled by switching to `fnvlist_lookup_uint8_array()`.

* tests/zfs-tests/cmd/file/file_fadvise.c: We add error handling.

* tests/zfs-tests/cmd/mmap_sync.c: We add error handling for munmap, but
  ignore failures on remove() with (void) since it is expected to be
  able to fail.

* tests/zfs-tests/cmd/mmapwrite.c: We add error handling.

As for unused return values, they were all in places where there was
error handling, so logic was added to handle the return values.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13920
2022-09-23 16:52:03 -07:00
Tino Reichardt
75e8b5ad84 Fix BLAKE3 tuneable and module loading on Linux and FreeBSD
Apply similar options to BLAKE3 as it is done for zfs_fletcher_4_impl.

The zfs module parameter on Linux changes from icp_blake3_impl to
zfs_blake3_impl.

You can check and set it on Linux via sysfs like this:
```
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle [fastest] generic sse2 sse41 avx2

[bash]# echo sse2 > /sys/module/zfs/parameters/zfs_blake3_impl
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle fastest generic [sse2] sse41 avx2
```

The modprobe module parameters may also be used now:
```
[bash]# modprobe zfs zfs_blake3_impl=sse41
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle fastest generic sse2 [sse41] avx2
```

On FreeBSD the BLAKE3 implementation can be set via sysctl like this:
```
[bsd]# sysctl vfs.zfs.blake3_impl
vfs.zfs.blake3_impl: cycle [fastest] generic sse2 sse41 avx2
[bsd]# sysctl vfs.zfs.blake3_impl=sse2
vfs.zfs.blake3_impl: cycle [fastest] generic sse2 sse41 avx2 \
  -> cycle fastest generic [sse2] sse41 avx2
```

This commit changes also some Blake3 internals like these:
- blake3_impl_ops_t was renamed to blake3_ops_t
- all functions are named blake3_impl_NAME() now

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13725
2022-09-16 14:25:53 -07:00
Richard Yao
8fdc229a9c
Fix memory leak in ztest
Coverity found this.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #13863
2022-09-13 16:53:21 -07:00
ixhamza
fb087146de
Add support for per dataset zil stats and use wmsum counters
ZIL kstats are reported in an inclusive way, i.e., same counters are
shared to capture all the activities happening in zil. Added support
to report zil stats for every datset individually by combining them
with already exposed dataset kstats.

Wmsum uses per cpu counters and provide less overhead as compared
to atomic operations. Updated zil kstats to replace wmsum counters
to avoid atomic operations.

Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #13636
2022-07-20 17:14:06 -07:00
Tino Reichardt
1d3ba0bf01
Replace dead opensolaris.org license link
The commit replaces all findings of the link:
http://www.opensolaris.org/os/licensing with this one:
https://opensource.org/licenses/CDDL-1.0

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13619
2022-07-11 14:16:13 -07:00
наб
dd66857d92 Remaining {=> const} char|void *tag
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13348
2022-06-29 14:08:59 -07:00
наб
a926aab902 Enable -Wwrite-strings
Also, fix leak from ztest_global_vars_to_zdb_args()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13348
2022-06-29 14:08:54 -07:00
Tino Reichardt
985c33b132
Introduce BLAKE3 checksums as an OpenZFS feature
This commit adds BLAKE3 checksums to OpenZFS, it has similar
performance to Edon-R, but without the caveats around the latter.

Homepage of BLAKE3: https://github.com/BLAKE3-team/BLAKE3
Wikipedia: https://en.wikipedia.org/wiki/BLAKE_(hash_function)#BLAKE3

Short description of Wikipedia:

  BLAKE3 is a cryptographic hash function based on Bao and BLAKE2,
  created by Jack O'Connor, Jean-Philippe Aumasson, Samuel Neves, and
  Zooko Wilcox-O'Hearn. It was announced on January 9, 2020, at Real
  World Crypto. BLAKE3 is a single algorithm with many desirable
  features (parallelism, XOF, KDF, PRF and MAC), in contrast to BLAKE
  and BLAKE2, which are algorithm families with multiple variants.
  BLAKE3 has a binary tree structure, so it supports a practically
  unlimited degree of parallelism (both SIMD and multithreading) given
  enough input. The official Rust and C implementations are
  dual-licensed as public domain (CC0) and the Apache License.

Along with adding the BLAKE3 hash into the OpenZFS infrastructure a
new benchmarking file called chksum_bench was introduced.  When read
it reports the speed of the available checksum functions.

On Linux: cat /proc/spl/kstat/zfs/chksum_bench
On FreeBSD: sysctl kstat.zfs.misc.chksum_bench

This is an example output of an i3-1005G1 test system with Debian 11:

implementation      1k      4k     16k     64k    256k      1m      4m
edonr-generic     1196    1602    1761    1749    1762    1759    1751
skein-generic      546     591     608     615     619     612     616
sha256-generic     240     300     316     314     304     285     276
sha512-generic     353     441     467     476     472     467     426
blake3-generic     308     313     313     313     312     313     312
blake3-sse2        402    1289    1423    1446    1432    1458    1413
blake3-sse41       427    1470    1625    1704    1679    1607    1629
blake3-avx2        428    1920    3095    3343    3356    3318    3204
blake3-avx512      473    2687    4905    5836    5844    5643    5374

Output on Debian 5.10.0-10-amd64 system: (Ryzen 7 5800X)

implementation      1k      4k     16k     64k    256k      1m      4m
edonr-generic     1840    2458    2665    2719    2711    2723    2693
skein-generic      870     966     996     992    1003    1005    1009
sha256-generic     415     442     453     455     457     457     457
sha512-generic     608     690     711     718     719     720     721
blake3-generic     301     313     311     309     309     310     310
blake3-sse2        343    1865    2124    2188    2180    2181    2186
blake3-sse41       364    2091    2396    2509    2463    2482    2488
blake3-avx2        365    2590    4399    4971    4915    4802    4764

Output on Debian 5.10.0-9-powerpc64le system: (POWER 9)

implementation      1k      4k     16k     64k    256k      1m      4m
edonr-generic     1213    1703    1889    1918    1957    1902    1907
skein-generic      434     492     520     522     511     525     525
sha256-generic     167     183     187     188     188     187     188
sha512-generic     186     216     222     221     225     224     224
blake3-generic     153     152     154     153     151     153     153
blake3-sse2        391    1170    1366    1406    1428    1426    1414
blake3-sse41       352    1049    1212    1174    1262    1258    1259

Output on Debian 5.10.0-11-arm64 system: (Pi400)

implementation      1k      4k     16k     64k    256k      1m      4m
edonr-generic      487     603     629     639     643     641     641
skein-generic      271     299     303     308     309     309     307
sha256-generic     117     127     128     130     130     129     130
sha512-generic     145     165     170     172     173     174     175
blake3-generic      81      29      71      89      89      89      89
blake3-sse2        112     323     368     379     380     371     374
blake3-sse41       101     315     357     368     369     364     360

Structurally, the new code is mainly split into these parts:
- 1x cross platform generic c variant: blake3_generic.c
- 4x assembly for X86-64 (SSE2, SSE4.1, AVX2, AVX512)
- 2x assembly for ARMv8 (NEON converted from SSE2)
- 2x assembly for PPC64-LE (POWER8 converted from SSE2)
- one file for switching between the implementations

Note the PPC64 assembly requires the VSX instruction set and the
kfpu_begin() / kfpu_end() calls on PowerPC were updated accordingly.

Reviewed-by: Felix Dörre <felix@dogcraft.de>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Closes #10058
Closes #12918
2022-06-08 15:55:57 -07:00
наб
1f5bc12893 ztest: O_CLOEXEC ztest_fd_rand
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13411
2022-05-11 10:33:12 -07:00
наб
888914486e ztest: take -B ./path/to/ztest, LD_LIBRARY_PATH=./path/lib:$L_L_P
This changes the behaviour of -B from the illumos one which would,
in the example in the manual, take just ./chroots/lenny;
this, however, is more versatile, and scales much better for systems
with ZFS in /usr/local, for example

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13411
Closes #1770
2022-05-11 10:33:12 -07:00
наб
510ee280c0 Remove enable_extended_FILE_stdio()
Even on Illumos it's only available in the 32-bit programming
environment, and, quoth enable_extended_FILE_stdio(3C):
> Historically, 32-bit Solaris applications have been limited to using
> only the file descriptors 0 through 255 with the standard I/O
> functions (see stdio(3C)) in the C library. The extended FILE
> facility allows well-behaved 32-bit applications to use any
> valid file descriptor with the standard I/O functions.
where "well-behaved" means that it
> does not directly access any fields in the FILE structure pointed
> to by the FILE pointer associated with any standard I/O stream,

And the stdio/flush.c implementation reads:
  /*
   * if this is not an internal extended FILE then check
   * if _file is being changed from underneath us.
   * It should not be because if
   * it is then then we lose our ability to guard against
   * silent data corruption.
   */
  if (!iop->__xf_nocheck && bad_fd > -1 && iop->_magic != bad_fd) {
      (void) fprintf(stderr,
          "Application violated extended FILE safety mechanism.\n"
          "Please read the man page for extendedFILE.\nAborting\n");
      abort();
  }

This appears to be an insane workaround for broken implementation with
exposed FILE internals and _file being an u8, both only on non-LP64;
it's shimmed out on all LP64 targets in Illumos,
and we shim it out as well: just get rid of it

This appears to've been originally fixed in illumos-gate
a5f69788de7ac07553de47f7fec8c05a9a94c105 ("PSARC 2006/162 Extended FILE
space for 32-bit Solaris processes", "1085341 32-bit stdio routines
should support file descriptors >255"), which also bears extendedFILE
and enable_extended_FILE_stdio(3C):
  -       unsigned char   _file;  /* UNIX System file descriptor */
  +       unsigned char   _magic; /* Old home of the file descriptor */
  +                               /* Only fileno(3C) can retrieve the
  				value now */
and
  +/*
  + * Macros to aid the extended fd FILE work.
  + * This helps isolate the changes to only the 32-bit code
  + * since 64-bit Solaris is not affected by this.
  + */
  +#ifdef  _LP64
  +#define        GET_FD(iop)             ((iop)->_file)
  +#define        SET_FILE(iop, fd)       ((iop)->_file = (fd))
  +#else
  +#define        GET_FD(iop)             \
  +               (((iop)->__extendedfd) ? _file_get(iop) : (iop)->_magic)
  +#define        SET_FILE(iop, fd)       (iop)->_magic = (fd); (iop)->__extendedfd = 0
  +#endif

Also remove the 1k setrlimit(NOFILE) calls: that's the default on Linux,
with 64k on Illumos and 171k on FreeBSD

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13411
2022-05-11 10:33:12 -07:00
наб
e8ca724393 ztest: fix in-tree detection for automatic zdb path
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13316
2022-05-10 10:21:09 -07:00
наб
c6a5d7d997 ztest: use $ZDB instead of $ZDB_PATH for zdb
Which actually gets zdb as set in common.sh

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13316
2022-05-10 10:21:04 -07:00
наб
0a9aaa7f0c cmd: move single-file binaries up, extract udev programs to udev/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13316
2022-05-10 10:20:34 -07:00