Adds a log/journal to dedup. At the end of txg, instead of writing the
entry directly to the ZAP, instead its adding to an in-memory tree and
appended to an on-disk object. The on-disk object is only read at
import, to reload the in-memory tree.
Lookups first go the the log tree before going to the ZAP, so
recently-used entries will remain close by in memory. This vastly
reduces overhead from dedup IO, as it will not have to do so many
read/update/write cycles on ZAP leaf nodes.
A flushing facility is added at end of txg, to push logged entries out
to the ZAP. There's actually two separate "logs" (in-memory tree and
on-disk object), one active (recieving updated entries) and one flushing
(writing out to disk). These are swapped (ie flushing begins) based on
memory used by the in-memory log trees and time since we last flushed
something.
The flushing facility monitors the amount of entries coming in and being
flushed out, and calibrates itself to try to flush enough each txg to
keep up with the ingest rate without competing too much with other IO.
Multiple tuneables are provided to control the flushing facility.
All the histograms and stats are update to accomodate the log as a
separate entry store. zdb gains knowledge of how to count them and dump
them. Documentation included!
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Both the API and the code were kinda mangled and I was really struggling
to follow it. The worst offender was the old ddt_stat_add(); after
fixing it up the rest of the changes are mostly knock-on effects and
targets of opportunity.
Note that the old ddt_stat_add() was safe against overflows - it could
produce crazy numbers, but the compiler wouldn't do anything stupid. The
assertions in ddt_stat_sub() go a lot of the way to protecting against
this; getting in a position where overflows are a problem is definitely
a programming error.
Also expanding ddt_stat_add() and ddt_histogram_empty() produces less
efficient assembly. I'm not bothered about this right now though; these
should not be hot functions, and if they are we'll optimise them later.
If we have to go back to the old form, we'll comment it like crazy.
Finally, I've removed the assertion that the bucket will never be
negative, as it will soon be possible to have entries with zero
refcounts: an entry for a block that is no longer on the pool, but is on
the log waiting to be synced out. It might be better to have a separate
bucket for these, since they're still using real space on disk, but
ultimately these stats are driving UI, and for now I've chosen to keep
them matching how they've looked in the past, as well as match the
operators mental model - pool usage is managed elsewhere.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Traditional dedup keeps a separate ddt_phys_t "type" for each possible
count of DVAs (that is, copies=) parameter. Each of these are tracked
independently of each other, and have their own set of DVAs. This leads
to an (admittedly rare) situation where you can create as many as six
copies of the data, by changing the copies= parameter between copying.
This is both a waste of storage on disk, but also a waste of space in
the stored DDT entries, since there never needs to be more than three
DVAs to handle all possible values of copies=.
This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the
first ddt_phys_t is used. Each time a block is written with the dedup
bit set, this single phys is checked to see if it has enough DVAs to
fulfill the request. If it does, the block is filled with the saved DVAs
as normal. If not, an adjusted write is issued to create as many extra
copies as are needed to fulfill the request, which are then saved into
the entry too.
Because a single phys is no longer an all-or-nothing, but can be
transitioning from fewer to more DVAs, the write path now has to keep a
copy of the previous "known good" DVA set so we can revert to it in case
an error occurs. zio_ddt_write() has been restructured and heavily
commented to make it much easier to see what's happening.
Backwards compatibility is maintained simply by allocating four
ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys
selection macros to check the flag. In the old arrangement, each number
of copies gets a whole phys, so it will always have either zero or all
necessary DVAs filled, with no in-between, so the old behaviour
naturally falls out of the new code.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
The idea here is that sometimes you need the contents of an entry with
no intent to modify it, and/or from a place where its difficult to get
hold of its originating ddt_t to know how to interpret it.
A lightweight entry contains everything you might need to "read" an
entry - its key, type and phys contents - but none of the extras for
modifying it or using it in a larger context. It also has the full
complement of phys slots, so it can represent any kind of dedup entry
without having to know the specific configuration of the table it came
from.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
The "flat phys" feature will use only a single phys slot for all
entries, which means the old "single", "double" etc naming now makes no
sense, and more importantly, means that choosing the right slot for a
given block pointer will depend on how many slots are in use for a given
DDT.
This removes the old names, and adds accessor macros to decouple
specific phys array indexes from any particular meaning.
(These macros look strange in isolation, mainly in the way they take the
ddt_t* as an arg but don't use it. This is mostly a separate commit to
introduce the concept to the reader before the "flat phys" commit
extends it).
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
This is the supporting infrastructure for the upcoming dedup features.
Traditionally, dedup objects live directly in the MOS root. While their
details vary (checksum, type and class), they are all the same "kind" of
thing - a store of dedup entries.
The new features are more varied than that, and are better thought of as
a set of related stores for the overall state of a dedup table.
This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will
cause new DDTs to be created as a ZAP in the MOS root, named
DDT-<checksum>. The is used as the root object for the normal type/class
store objects, but will also be a place for any storage required by new
features.
This commit adds two new fields to ddt_t, for version and flags. These
are intended to describe the structure and features of the overall dedup
table, and are stored as-is in the DDT root. In this commit, flags are
always zero, but the intent is that they can be used to hang optional
logic or state onto for new dedup features. Version is always 1.
For a "legacy" dedup table, where no DDT root directory exists, the
version will be 0.
ddt_configure() is expected to determine the version and flags features
currently in operation based on whether or not the fast_dedup feature is
enabled, and from what's available on disk. In this way, its possible to
support both old and new tables.
This also provides a migration path. A legacy setup can be upgraded to
FDT by creating the DDT root ZAP, moving the existing objects into it,
and setting version and flags appropriately. There's no support for that
here, but it would be straightforward to add later and allows the
possibility that newer features could be applied to existing dedup
tables.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15892
This change adds a new `zpool prefetch -t ddt $pool` command which
causes a pool's DDT to be loaded into the ARC. The primary goal is to
remove the need to "warm" a pool's cache before deduplication stops
slowing write performance. It may also provide a way to reload portions
of a DDT if they have been flushed due to inactivity.
Sponsored-by: iXsystems, Inc.
Sponsored-by: Catalogics, Inc.
Sponsored-by: Klara, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Will Andrews <will.andrews@klarasystems.com>
Signed-off-by: Fred Weigel <fred.weigel@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Co-authored-by: Will Andrews <will.andrews@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Closes#15890
This is the buffer size passed to ddt_object_name(), to expand the
DMU_POOL_DDT format. That format inserts the table checksum, class and
type names, which as I write this are max 6, 9 and 3, respectively.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15908
Store objects store keys and values, so have them take those types and
nothing more. This way, they don't need to be concerned about the "kind"
of entry being operated on; the dispatch layer can take care of the
appropriate conversions.
This adds a "contains" op to see if a particular entry exists without
loading it, which makes a couple of things easier to do; in particular,
it allows us to avoid an allocation in ddt_class_contains().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15887
Things get confused when there's more than one name for a thing.
Note that we don't do this for ddt_object_t, ddt_histogram_t and
ddt_stat_t because they're part of the public ZFS interface.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15887
Mostly for consistency, so the reader is less likely to wonder why these
things look different.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15887
Just to make it easier to know which bits to pay attention to.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15887
