Before this change DDT lock was taken 4 times per written block,
and as effectively a pool-wide lock it can be highly congested.
This change introduces a new per-entry dde_io_lock, protecting some
fields during I/O ready and done stages, so that we don't need the
global lock there.
According to my write tests on 64-thread system with 4KB blocks this
significantly reduce the global lock contention, reducing CPU usage
from 100% to expected ~80%, and increasing write throughput by 10%.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17960
ddt_lookup() is a very busy code under a highly congested global
lock. Anything we can save here is very important.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17980
They're basically the same thing; lets just carry one.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17948
Only include the required icp headers. There's no need to
include sys/zfs_context.h and pull in all of the zfs headers.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17861
This is mostly a placeholder; it's not actually clear if a boot
environment makes any sense for userspace. Still, "posix" is the likely
future name of libzpool as a port, and this define is mandatory, so lets
roll with it for now.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17861
Pull all of the internal debug infrastructure up in to the zfs
code to clean up the layering. Remove all the dodgy usage of
SET_ERROR and DTRACE_PROBE from the spl. Luckily it was
lightly used in the spl layer so we're not losing much.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17861
These are kind-of compiler attribute placeholders, so go here with the
others for now.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17861
sys/debug.h is not really the right place for them, but we already have
some there for libspl, so it is at least convenient.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17861
Introduce a new vdev property `VDEV_PROP_SLOW_IO_REPORTING` that
allows users to disable notifications for slow devices.
This prevents ZED and/or ZFSD from degrading the pool due to slow
I/O.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Closes 17477
Implement BRT (Block Reference Table) prefetch functionality similar
to existing DDT prefetch. This allows preloading BRT metadata into
ARC to improve performance for block cloning operations and frees
of earlier cloned blocks.
Make -t parameter optional. When omitted, prefetch all supported
metadata types (both DDT and BRT now).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17890
This is useful as debugging support, as it lets namespace lock
operations be traced directly. It will also be useful for future work to
reduce the use of spa_namespace_lock, traditionally a source of
difficult deadlocks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17906
BRT_RANGESIZE_TO_NBLOCKS() takes number of ranges as its argument.
To get number of blocks we should multiply it by the entry size,
not divide by it, as it was due to missing parentheses.
Before #17875 this could cause small memory corruptions for vdevs
bigger than 64TB, but the change made the bug more noticeable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17886Closes#17915
Free issue threads might block waiting for synchronous DDT, BRT or
GANG header reads. So unlike other taskqs using ZTI_SCALE to scale
with number of CPUs, here we also need some amount of threads to
potentially saturate pool reads. I am not sure we always want the
96 threads we had before ZTI_SCALE introduction at #11966 on small
systems, but lets make it at least 32.
While here, make free taskqs configurable, similar to read and
write ones.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17903
We need to specifically use the FX_XFLAG_* macros in zpl_ioctl_*attr()
codepaths, and the FS_*_FL macros in the zpl_ioctl_*flags() codepaths.
The earlier code just assumes the FS_*_FL macros for both codepaths.
The 6.17 kernel add a bitmask check in copy_fsxattr_from_user() that
exposed this error via failing 'projectquota' ZTS tests.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17884Closes#17869
Both DDT log and BRT counters we read on pool import and then only
append or overwrite in full blocks. We don't need them in DMU or
ARC caches. Fortunately we have DMU_UNCACHEDIO for this now.
Even more we don't need BRT in non-evictable metadata DMU caches,
since it will likely never fit there, while block the cache from
its original users. Since DMU_OT_IS_METADATA_CACHED() has no way
to differentiate the new metadata types, mark BRT with storage
type of DMU_OT_DDT_ZAP. As side effect it will also put it on
dedup device, but that should actually be right.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17875
Over the time many of DMU functions got flags argument to control
prefetch, caching, etc. Few functions though left without it, even
though closer look shown that many of them do not require prefetch
due to their access pattern. This patch adds the flags argument to
dmu_write(), dmu_buf_hold_array() and dmu_buf_hold_array_by_bonus(),
passing DMU_READ_NO_PREFETCH where applicable.
I am going to also pass DMU_UNCACHEDIO to some of them later.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17872
In "all pools" mode, pool_iter_refresh() will call zpool_iter(), which
will call zpool_refresh_stats() before calling add_pool(). If we already
have the pool, this is a different handle, so we just release it and
return. Back in pool_iter_refresh(), we then call zpool_stats_refresh()
again for our handle on the same pool.
All together, this means we're doing two ZFS_IOC_POOL_STATS calls into
the kernel for every pool in the system. This isn't wrong, but it does
double the pressure on global locks.
Instead, we add a new function zpool_refresh_stats_from_handle() that
simply copies the pool config and state from one handle to another, and
use it to update our handle before we release it in add_pool(), so we
only have one call per pool per interval.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17807
