This option is removed upstream in favour of plain INVARIANTS.
VNASSERT is always defined so I see no reason to use it conditionally.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#18136
This commit adds support for converting a file handle to its
parent dentry. This is called in exportfs_decode_fh_raw()
when subtree checking is enabled in NFS. Defining this and
handling the expanded filehandles allows the knfsd to succeed
in handling the file handle where it might otherwise fail
with ESTALE when trying to open by filehandle.
A side effect of this change is that name_to_handle_at(2)
and open_by_handle_at(2) now support AT_HANDLE_CONNECTABLE.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Andrew Walker <andrew.walker@truenas.com>
Closes#18099
This code is only compiled for the Linux kernel module, so that define
is always set.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
These are used to implement the kstat and procfs_list interfaces, and
aren't used from outside. There's no need to export them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
It's a lot of rarely-compiled code, so move it to the side to make other
code easier to read.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
Long ago, SPL atomics were implemented as a global spinlock over
conventional operations. In 5e9b5d832b (2009-10) they was converted to
proper atomics, with the spinlock retained as a fallback.
The switch to compile with the fallback was later removed in a91258913f
(2018-05), but the code it enabled wasn't. So lets do that.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
Fix zfs_open() to skip zil_async_to_sync() for the snapshot, as it won't
have any transactions. zfsvfs->z_log is NULL for the snapshot.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#18091
This commit adds handling for the STATX_CHANGE_COOKIE so that
we can properly surface the ZFS znode sequence to NFS clients via
knfsd.
If knfsd does not have STATX_CHANGE_COOKIE in statx result then
it will synthesize the NFS change_info4 structure and related
change4id values algorithmically based on the ctime value of the
file. Since internally ZFS is using ktime_get_coarse_real_ts64()
for the timestamp calculation here it introduces the possiblity
that the change will not increment the change4id of directories
/ files causing a failure in the client to invalidate its attr
cache (among other things). See RFC 8881 Section 10.8 for
discussion of how clients may implement name and directory
caching.
Notable in this commit is that we are not initializing the
inode->i_version to the znode->z_seq number. The reason for this
is that we're intentionally not setting `SB_I_VERSION`. This
indicates that the filesystem manages its own i_version and
so it is not populated in the generic_fillattr.
The following compares tight loop of setattr over NFSv4
protocol while traching nfsd4_change_attribute.
Before change:
inode, change_attribute
4723, 7590032215978780890
4723, 7590032215978780890
4723, 7590032215978780890
4723, 7590032215982780865
4723, 7590032215982780865
After change:
inode, change_attribute
7602, 7590032992517123951
7602, 7590032992517123952
7602, 7590032992517123953
7602, 7590032992517123954
7602, 7590032992517123955
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Andrew Walker <andrew.walker@truenas.com>
Closes#18097
vmalloc()'d memory is not movable/reclaimable, so __GFP_RECLAIMABLE is
not a valid flag, and since 6.19 the kernel warns if you use it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18107
It hasn't been necessary since Linux 3.13
(torvalds/linux@a57a49887e), and since 6.19 the kernel warns if you
use it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
Since Linux 4.12 (torvalds/linux@19809c2da2) __GFP_HIGHMEM has been
automatically added to calls to __vmalloc() internally, so we don't need
it anymore. This is good, because since 6.19 the kernel warns if you use
__GFP_HIGHMEM.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
If the file already has more than one block, then the current
block size cannot change. But if the file block size is less
than the maximum block size supported by the file system, and
there are multiple blocks in the file, the current code will
almost always extend the rangelock to its maximum size.
This means that all writes become serialized and even reads
are slowed as they will more often contend with writes. This
commit adjusts the test so that we will not lock the entire
range if there is more than one block in the file already.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mark Maybee <mark.maybee@perforce.com>
Closes#18046Closes#18064
We may not be able to avoid our code referencing the symbol, but we can
ensure that a symbol of that name is available to the linker during
build, and so not require linking the GPL-exported version.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18009Closes#18040
Compilation time bug introduced by 87df5e4 commit.
Fix for the compilation error(Linux kernel 6.18.0):
"zfs/module/os/linux/zfs/abd_os.c:920:32: error: implicit declaration
of function ‘nth_page’; did you mean ‘pte_page’?
[-Werror=implicit-function-declaration]".
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: agiUnderground <alex.dev.cv@gmail.com>
Closes#18034
Fix another instance where ZFS assumes multiple pages can be
mapped at once via zfs_kmap_local(), resulting in crashes and
potential memory corruption on HIGHMEM-enabled (typically 32-bit)
systems.
Reviewed-by: RageLtMan <rageltman@sempervictus>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bspengler-oss <94915855+bspengler-oss@users.noreply.github.com>
Closes#15668Closes#18030
HIGHMEM kmap interfaces operate on only a single page at a time
yet ZFS hadn't accounted for this, resulting in crashes and
potential memory corruption on HIGHMEM (typically 32-bit) systems.
This was caught by PaX's KERNSEAL feature as it makes use of
HIGHMEM functionality on x64.
On typical 64-bit systems, this issue wouldn't have been observed,
as the map interfaces simply fall back to returning an address in
lowmem where the contiguous pages can be accessed directly.
Joint work with the PaX Team, tested by Mark van Dijk
Reviewed-by: RageLtMan <rageltman@sempervictus>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bspengler-oss <94915855+bspengler-oss@users.noreply.github.com>
Closes#15668Closes#18030
Multiple threads racing to automount the same snapshot can both spawn
mount helper processes that successfully complete, causing both parent
threads to attempt AVL tree registration and triggering a VERIFY()
panic in avl_add(). This occurs because the fsconfig/fsmount API lacks
the serialization provided by traditional mount() via lock_mount().
The fix adds a per-entry mutex (se_mtx) to zfs_snapentry_t that
serializes mount and unmount operations on the same snapshot. The first
mount thread creates a pending entry with se_spa=NULL and holds se_mtx
during the helper execution. Concurrent mounts find the pending entry
and return success without spawning duplicate helpers. Unmount waits on
se_mtx if a mount is pending, ensuring proper serialization. This allows
different snapshots to mount in parallel while preventing the AVL panic.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17943
In general it's possible for a vnode to not have an associated VM
object. This happens in particular with named pipes, which have
some distinct VOPs, defined in zfs_fifoops. Thus, this chunk of
zfs_freebsd_fsync() needs to check for the FIFO case, like other
vm_object_mightbedirty() callers do.
(Note that vn_flush_cached_data() calls are predicated on
zn_has_cached_data() returning true, and it checks for a NULL v_object
pointer already.)
Fixes: ef4058fcdc
Reported-by: Collin Funk <collin.funk1@gmail.com>
Reviewed-by: Sean Eric Fagan <sef@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#18015
A deadlock occurs when snapshot expiry tasks are cancelled while holding
locks. The snapshot expiry task (snapentry_expire) spawns an umount
process and waits for it to complete. Concurrently, ARC memory pressure
triggers arc_prune which calls zfs_exit_fs(), attempting to cancel the
expiry task while holding locks. The umount process spawned by the
expiry task blocks trying to acquire locks held by arc_prune, which is
blocked waiting for the expiry task to complete. This creates a circular
dependency: expiry task waits for umount, umount waits for arc_prune,
arc_prune waits for expiry task.
Fix by adding non-blocking cancellation support to taskq_cancel_id().
The zfs_exit_fs() path calls zfsctl_snapshot_unmount_delay() to
reschedule the unmount, which needs to cancel any existing expiry task.
It now uses non-blocking cancellation to avoid waiting while holding
locks, breaking the deadlock by returning immediately when the task is
already running.
The per-entry se_taskqid_lock has been removed, with all taskqid
operations now protected by the global zfs_snapshot_lock held as
WRITER. Additionally, an se_in_umount flag prevents recursive waits when
zfsctl_destroy() is called during unmount. The taskqid is now only
cleared by the caller on successful cancellation; running tasks clear
their own taskqid upon completion.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17941
Remove unsafe timer_pending() check in taskq_cancel_id() that created a
race where:
- Timer expires and timer_pending() returns FALSE
- task_done() frees task with tqent_func = NULL
- Timer callback executes and queues freed task
- Worker thread crashes executing NULL function
Always call timer_delete_sync() unconditionally to ensure timer callback
completes before task is freed.
Reliably reproducible by injecting mdelay(10) after setting CANCEL flag
to widen the race window, combined with frequent task cancellations
(e.g., snapshot automount expiry).
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17942
Pull all of the internal debug infrastructure up in to the zfs
code to clean up the layering. Remove all the dodgy usage of
SET_ERROR and DTRACE_PROBE from the spl. Luckily it was
lightly used in the spl layer so we're not losing much.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17861
This is useful as debugging support, as it lets namespace lock
operations be traced directly. It will also be useful for future work to
reduce the use of spa_namespace_lock, traditionally a source of
difficult deadlocks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17906
FreeBSD now has a pathconf name called _PC_CASE_INSENSITIVE
used to check if a file system performs case insensitive
name lookups.
This patch adds support for this name.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17908
We need to specifically use the FX_XFLAG_* macros in zpl_ioctl_*attr()
codepaths, and the FS_*_FL macros in the zpl_ioctl_*flags() codepaths.
The earlier code just assumes the FS_*_FL macros for both codepaths.
The 6.17 kernel add a bitmask check in copy_fsxattr_from_user() that
exposed this error via failing 'projectquota' ZTS tests.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17884Closes#17869
In cases where all issued ZIOs must succeed, and we can't do
anything clever about the errors, we should just explicitly set
ZIO_FLAG_TRYHARD and let OS to do all the reasonable retries.
In other cases, where retries can be different from the original,
for example, some ZIOs are allowed to fail due to redundancy, or
we can disable aggregation on retrial to get at least some of
the data, we can do first pass without TRYHARD, and only if needed
retry with ZIO_FLAG_IO_RETRY (which implies TRYHARD semantics).
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17877
Over the time many of DMU functions got flags argument to control
prefetch, caching, etc. Few functions though left without it, even
though closer look shown that many of them do not require prefetch
due to their access pattern. This patch adds the flags argument to
dmu_write(), dmu_buf_hold_array() and dmu_buf_hold_array_by_bonus(),
passing DMU_READ_NO_PREFETCH where applicable.
I am going to also pass DMU_UNCACHEDIO to some of them later.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17872
In zio_crypt_key_wrap and zio_crypt_key_unwrap, the cuio_s variable was
not initialized before the calls to zfs_uio_init, leading to
uninitialized access to cuio_s.uio_offset. Initialize it to avoid gcc
warnings.
Similar issue as fixed in 2bf152021 ("Fix gcc uninitialized warning in
FreeBSD zio_crypt.c")
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17863
Initially, `zfs_getpages()` is provided with an array of busy pages by
the vnode pager. It then tries to acquire the range lock, but if there
is a concurrent `zfs_write()` running and fails to acquire that range
lock, it "unbusies" the pages to avoid a deadlock with `zfs_write()`.
After that, it grabs the pages again and retries to acquire the range
lock, and so on.
Once it got the range lock, it filters out valid pages, then copy DMU
data to the remaining invalid pages.
The problem is that freshly allocated zero'd pages it grabbed itself are
marked as valid. Therefore they are skipped by the second part of the
function and DMU data is never copied to these pages. This causes mapped
pages to contain zeros instead of the expected file content.
This was discovered while working on RabbitMQ on FreeBSD. I could
reproduce the problem easily with the following commands:
git clone https://github.com/rabbitmq/rabbitmq-server.git
cd rabbitmq-server/deps/rabbit
gmake distclean-ct RABBITMQ_METADATA_STORE=mnesia \
ct-amqp_client t=cluster_size_3:leader_transfer_stream_send
The testsuite fails because there is a sendfile(2) that can happen
concurrently to a write(2) on the same file. This leads to sendfile(2)
or read(2) (after the sendfile) sending/returning data with zeros, which
causes a function to crash.
The patch consists of not setting the `VM_ALLOC_ZERO` flag when
`zfs_getpages()` grabs pages again. Then, the last page is zero'd if it
is invalid, in case it would be partially filled with the end of the
file content. Other pages are either valid (and will be skipped) or they
will be entirely overwritten by the file content.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
Closes#17851
The namespace type has moved from the namespace ops struct to the
"common" base namespace struct. Detect this and define a macro that does
the right thing for both versions.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Linux 6.18 removed write_cache_pages() without a usable replacement.
Here we implement a minimal zpl_write_cache_pages() that find the dirty
pages within the mapping, gets them into the expected state and hands
them off to zfs_putpage(), which handles the rest.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
ida_simple_get() and ida_simple_remove() are removed in 6.18. However,
since 4.19 they have been simple wrappers around ida_alloc() and
ida_free(), so we can just use those directly.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
MS-FSCC 2.6 is the governing document for
DOS attribute behavior. It specifies the following:
For a file, applications can read the file but
cannot write to it or delete it. For a directory,
applications cannot delete it, but applications can
create and delete files from the directory.
Signed-off-by: Andrew Walker <awalker@ixsystems.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17837
The actual minimum hole size on ZFS is variable, but we always report
SPA_MINBLOCKSIZE, which is 512. This may lead applications to believe
that they can reliably create holes at 512-byte boundaries and waste
resources trying to punch holes that ZFS ends up filling anyway.
* In the general case, if the vnode is a regular file, return its
current block size, or the record size if the file is smaller than
its own block size. If the vnode is a directory, return the dataset
record size. If it is neither a regular file nor a directory,
return EINVAL.
* In the control directory case, always return EINVAL.
Signed-off-by: Dag-Erling Smørgrav <des@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17750
ZVOLs don't support all block layer IO request types. Add a check for
the IO types we do support. Also, remove references to
io_is_secure_erase() since they are not supported on ZVOLs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17803
The zvol blk-mq codepaths would erroneously send FLUSH and TRIM
commands down the read codepath, rather than write. This fixes
the issue, and updates the zvol_misc_fua test to verify that
sync writes are actually happening.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17761Closes#17765
Traditionally, unused dentries would be cached in the dentry cache until
the associated entry is no longer on disk. The cached dentry continues
to hold an inode reference, causing the inode to be pinned (see previous
commit).
Here we implement the dentry op d_delete, which is roughly analogous to
the drop_inode superblock op, and add a zfs_delete_dentry tunable to
control its behaviour. By default it continues the traditional
behaviour, but when the tunable is enabled, we signal that an unused
dentry should be freed immediately, releasing its inode reference, and
so allowing that inode to be deleted if no longer in use.
Sponsored-by: Klara, Inc.
Sponsored-by: Fastmail Pty Ltd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17746
Traditionally, unused inodes would be held on the superblock inode cache
until the associated on-disk file is removed or the kernel requests
reclaim. On filesystems with millions of rarely-used files, this can be
a lot of unusable memory.
Here we implement the superblock drop_inode method, and add a
zfs_delete_inode tunable to control its behaviour. By default it
continues the traditional behaviour, but when the tunable is enabled, we
signal that the inode should be deleted immediately when the last
reference is dropped, rather than cached. This releases the associated
data to the dbuf cache and ARC, allowing them to be reclaimed normally.
Sponsored-by: Klara, Inc.
Sponsored-by: Fastmail Pty Ltd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17746
Many IO operations are submitted to the kernel async, and so the zio can
complete and followup actions before the submission call returns. If one
of the followup actions closes the disk (eg during pool create/import),
the initiator may be left holding a lock on the disk at destruction.
Instead, take the write lock before finishing up and decoupling the disk
state from the vdev proper. The caller will hold until all IO is
submitted and locks released.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17719
zfs_aclset_common() might be called for newly created or not even
created vnodes, that triggers assertions on newer FreeBSD versions
with DEBUG_VFS_LOCKS included into INVARIANTS. In the first case
make sure to call vn_seqc_write_begin()/_end(), in the second just
skip the assertion.
The similar has to be done for project management IOCTL and file-
bases extended attributes, since those are not going through VFS.
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17722
We only have extremely narrow uses, so move it all into a single
function that does only what we need, with and without d_set_d_op().
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17621
FreeBSD now has a pathconf name called _PC_CLONE_BLKSIZE
which is the block size supported for block cloning for
the file system. Since ZFS's block size varies per file,
return the largest size likely to be used, or zero if block
cloning is not supported.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17645
These are old pre-OpenZFS tunable names that have long been
available via either conventional ZFS_MODULE_PARAM tunables or through
kstats. There's no point doubling up anymore, so delete them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17375
zfsctl_root_readdir(): properly set eof.
readdir(): set *eofp to 1 on eof.
If there were no dirents to copy out, return EINVAL same as UFS.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Konstantin Belousov <kib@FreeBSD.org>
Closes#17655
