mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-19 19:01:00 +03:00
2e08df84d8
12 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Richard Yao
|
ab8d9c1783 |
Cleanup: 64-bit kernel module parameters should use fixed width types
Various module parameters such as `zfs_arc_max` were originally `uint64_t` on OpenSolaris/Illumos, but were changed to `unsigned long` for Linux compatibility because Linux's kernel default module parameter implementation did not support 64-bit types on 32-bit platforms. This caused problems when porting OpenZFS to Windows because its LLP64 memory model made `unsigned long` a 32-bit type on 64-bit, which created the undesireable situation that parameters that should accept 64-bit values could not on 64-bit Windows. Upon inspection, it turns out that the Linux kernel module parameter interface is extensible, such that we are allowed to define our own types. Rather than maintaining the original type change via hacks to to continue shrinking module parameters on 32-bit Linux, we implement support for 64-bit module parameters on Linux. After doing a review of all 64-bit kernel parameters (found via the man page and also proposed changes by Andrew Innes), the kernel module parameters fell into a few groups: Parameters that were originally 64-bit on Illumos: * dbuf_cache_max_bytes * dbuf_metadata_cache_max_bytes * l2arc_feed_min_ms * l2arc_feed_secs * l2arc_headroom * l2arc_headroom_boost * l2arc_write_boost * l2arc_write_max * metaslab_aliquot * metaslab_force_ganging * zfetch_array_rd_sz * zfs_arc_max * zfs_arc_meta_limit * zfs_arc_meta_min * zfs_arc_min * zfs_async_block_max_blocks * zfs_condense_max_obsolete_bytes * zfs_condense_min_mapping_bytes * zfs_deadman_checktime_ms * zfs_deadman_synctime_ms * zfs_initialize_chunk_size * zfs_initialize_value * zfs_lua_max_instrlimit * zfs_lua_max_memlimit * zil_slog_bulk Parameters that were originally 32-bit on Illumos: * zfs_per_txg_dirty_frees_percent Parameters that were originally `ssize_t` on Illumos: * zfs_immediate_write_sz Note that `ssize_t` is `int32_t` on 32-bit and `int64_t` on 64-bit. It has been upgraded to 64-bit. Parameters that were `long`/`unsigned long` because of Linux/FreeBSD influence: * l2arc_rebuild_blocks_min_l2size * zfs_key_max_salt_uses * zfs_max_log_walking * zfs_max_logsm_summary_length * zfs_metaslab_max_size_cache_sec * zfs_min_metaslabs_to_flush * zfs_multihost_interval * zfs_unflushed_log_block_max * zfs_unflushed_log_block_min * zfs_unflushed_log_block_pct * zfs_unflushed_max_mem_amt * zfs_unflushed_max_mem_ppm New parameters that do not exist in Illumos: * l2arc_trim_ahead * vdev_file_logical_ashift * vdev_file_physical_ashift * zfs_arc_dnode_limit * zfs_arc_dnode_limit_percent * zfs_arc_dnode_reduce_percent * zfs_arc_meta_limit_percent * zfs_arc_sys_free * zfs_deadman_ziotime_ms * zfs_delete_blocks * zfs_history_output_max * zfs_livelist_max_entries * zfs_max_async_dedup_frees * zfs_max_nvlist_src_size * zfs_rebuild_max_segment * zfs_rebuild_vdev_limit * zfs_unflushed_log_txg_max * zfs_vdev_max_auto_ashift * zfs_vdev_min_auto_ashift * zfs_vnops_read_chunk_size * zvol_max_discard_blocks Rather than clutter the lists with commentary, the module parameters that need comments are repeated below. A few parameters were defined in Linux/FreeBSD specific code, where the use of ulong/long is not an issue for portability, so we leave them alone: * zfs_delete_blocks * zfs_key_max_salt_uses * zvol_max_discard_blocks The documentation for a few parameters was found to be incorrect: * zfs_deadman_checktime_ms - incorrectly documented as int * zfs_delete_blocks - not documented as Linux only * zfs_history_output_max - incorrectly documented as int * zfs_vnops_read_chunk_size - incorrectly documented as long * zvol_max_discard_blocks - incorrectly documented as ulong The documentation for these has been fixed, alongside the changes to document the switch to fixed width types. In addition, several kernel module parameters were percentages or held ashift values, so being 64-bit never made sense for them. They have been downgraded to 32-bit: * vdev_file_logical_ashift * vdev_file_physical_ashift * zfs_arc_dnode_limit_percent * zfs_arc_dnode_reduce_percent * zfs_arc_meta_limit_percent * zfs_per_txg_dirty_frees_percent * zfs_unflushed_log_block_pct * zfs_vdev_max_auto_ashift * zfs_vdev_min_auto_ashift Of special note are `zfs_vdev_max_auto_ashift` and `zfs_vdev_min_auto_ashift`, which were already defined as `uint64_t`, and passed to the kernel as `ulong`. This is inherently buggy on big endian 32-bit Linux, since the values would not be written to the correct locations. 32-bit FreeBSD was unaffected because its sysctl code correctly treated this as a `uint64_t`. Lastly, a code comment suggests that `zfs_arc_sys_free` is Linux-specific, but there is nothing to indicate to me that it is Linux-specific. Nothing was done about that. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Original-patch-by: Andrew Innes <andrew.c12@gmail.com> Original-patch-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13984 Closes #14004 |
||
|
Tino Reichardt
|
1d3ba0bf01
|
Replace dead opensolaris.org license link
The commit replaces all findings of the link: http://www.opensolaris.org/os/licensing with this one: https://opensource.org/licenses/CDDL-1.0 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Closes #13619 |
||
|
Alexander Motin
|
6aa8c21a2a
|
More speculative prefetcher improvements
- Make prefetch distance adaptive: up to 4MB prefetch doubles for every, hit same as before, but after that it grows by 1/8 every time the prefetch read does not complete in time to satisfy the demand. My tests show that 4MB is sufficient for wide NVMe pool to saturate single reader thread at 2.5GB/s, while new 64MB maximum allows the same thread to reach 1.5GB/s on wide HDD pool. Further distance increase may increase speed even more, but less dramatic and with higher latency. - Allow early reuse of inactive prefetch streams: streams that never saw hits can be reused immediately if there is a demand, while others can be reused after 1s of inactivity, starting with the oldest. After 2s of inactivity streams are deleted to free resources same as before. This allows by several times increase strided read performance on HDD pool in presence of simultaneous random reads, previously filling the zfetch_max_streams limit for seconds and so blocking most of prefetch. - Always issue intermediate indirect block reads with SYNC priority. Each of those reads if delayed for longer may delay up to 1024 other block prefetches, that may be not good for wide pools. Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13452 |
||
|
Alexander Motin
|
891568c990
|
Split dmu_zfetch() speculation and execution parts
To make better predictions on parallel workloads dmu_zfetch() should be called as early as possible to reduce possible request reordering. In particular, it should be called before dmu_buf_hold_array_by_dnode() calls dbuf_hold(), which may sleep waiting for indirect blocks, waking up multiple threads same time on completion, that can significantly reorder the requests, making the stream look like random. But we should not issue prefetch requests before the on-demand ones, since they may get to the disks first despite the I/O scheduler, increasing on-demand request latency. This patch splits dmu_zfetch() into two functions: dmu_zfetch_prepare() and dmu_zfetch_run(). The first can be executed as early as needed. It only updates statistics and makes predictions without issuing any I/Os. The I/O issuance is handled by dmu_zfetch_run(), which can be called later when all on-demand I/Os are already issued. It even tracks the activity of other concurrent threads, issuing the prefetch only when _all_ on-demand requests are issued. For many years it was a big problem for storage servers, handling deeper request queues from their clients, having to either serialize consequential reads to make ZFS prefetcher usable, or execute the incoming requests as-is and get almost no prefetch from ZFS, relying only on deep enough prefetch by the clients. Benefits of those ways varied, but neither was perfect. With this patch deeper queue sequential read benchmarks with CrystalDiskMark from Windows via iSCSI to FreeBSD target show me much better throughput with almost 100% prefetcher hit rate, comparing to almost zero before. While there, I also removed per-stream zs_lock as useless, completely covered by parent zf_lock. Also I reused zs_blocks refcount to track zf_stream linkage of the stream, since I believe previous zs_fetch == NULL check in dmu_zfetch_stream_done() was racy. Delete prefetch streams when they reach ends of files. It saves up to 1KB of RAM per file, plus reduces searches through the stream list. Block data prefetch (speculation and indirect block prefetch is still done since they are cheaper) if all dbufs of the stream are already in DMU cache. First cache miss immediately fires all the prefetch that would be done for the stream by that time. It saves some CPU time if same files within DMU cache capacity are read over and over. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam Moss <c@yotes.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #11652 |
||
|
Matthew Macy
|
af20b97078
|
zfetch: Don't issue new streams when old have not completed
The current dmu_zfetch code implicitly assumes that I/Os complete within min_sec_reap seconds. With async dmu and a readonly workload (and thus no exponential backoff in operations from the "write throttle") such as L2ARC rebuild it is possible to saturate the drives with I/O requests. These are then effectively compounded with prefetch requests. This change reference counts streams and prevents them from being recycled after their min_sec_reap timeout if they still have outstanding I/Os. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #10900 |
||
|
Matthew Ahrens
|
1ff46825e2 |
Replace zf_rwlock with a mutex
The rwlock implementation on linux does not perform as well as mutexes. We can realize a performance benefit by replacing the zf_rwlock with a mutex. Local microbenchmarks show ~50% improvement, and over NFS we see ~5% improvement on several of the ZFS Performance Tests cases, especially randwrite and seq_write. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #9062 |
||
|
Paul Dagnelie
|
f664f1ee7f |
Decrease contention on dn_struct_rwlock
Currently, sequential async write workloads spend a lot of time contending on the dn_struct_rwlock. This lock is responsible for protecting the entire block tree below it; this naturally results in some serialization during heavy write workloads. This can be resolved by having per-dbuf locking, which will allow multiple writers in the same object at the same time. We introduce a new rwlock, the db_rwlock. This lock is responsible for protecting the contents of the dbuf that it is a part of; when reading a block pointer from a dbuf, you hold the lock as a reader. When writing data to a dbuf, you hold it as a writer. This allows multiple threads to write to different parts of a file at the same time. Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Matt Ahrens matt@delphix.com Reviewed by: George Wilson george.wilson@delphix.com Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> External-issue: DLPX-52564 External-issue: DLPX-53085 External-issue: DLPX-57384 Closes #8946 |
||
|
Alexander Motin
|
755065f3dc |
OpenZFS 6322 - ZFS indirect block predictive prefetch
For quite some time I was thinking about possibility to prefetch
ZFS indirection tables while doing sequential reads or writes.
Recent changes in predictive prefetcher made that much easier to
do. My tests on zvol with 16KB block size on 5x striped and 2x
mirrored pool of 10 disks show almost double throughput on sequential
read, and almost tripple on sequential rewrite. While for read alike
effect can be received from increasing maximal prefetch distance
(though at higher memory cost), for rewrite there is no other
solution so far.
Authored by: Alexander Motin <mav@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6322
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/cb92f413
Closes #5040
Porting notes:
- Change from upstream in module/zfs/dbuf.c in 'int dbuf_read' due
to commit
|
||
|
Matthew Ahrens
|
7f60329a26 |
Illumos 5987 - zfs prefetch code needs work
5987 zfs prefetch code needs work Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Approved by: Gordon Ross <gordon.ross@nexenta.com> References: https://www.illumos.org/issues/5987 zfs prefetch code needs work illumos/illumos-gate@cf6106c 5987 zfs prefetch code needs work Porting notes: - [module/zfs/dbuf.c] - |
||
|
Shen Yan
|
5cb65efe2c |
Fix zstream_t incorrect type
The DMU zfetch code organizes streams with lists not avl trees. A avl_node_t was mistakenly used for a list_node_t in the zstream_t type. This is incorrect (but harmless) and when unnoticed because: 1) The list functions explicitly cast the value preventing a warning, 2) sizeof(avl_node_t) >= sizeof(list_node_t) so no overrun occurs, and 3) The calculated offset is the same regardless of the type. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1946 |
||
|
Brian Behlendorf
|
c409e4647f |
Add missing ZFS tunables
This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int) |
||
|
Brian Behlendorf
|
6283f55ea1 |
Support custom build directories and move includes
One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense. |