In l2arc_evict(), the config lock may be acquired in reverse order
(e.g., first the config lock (writer), then a hash lock) unlike in
arc_read() during scenarios like L2ARC device removal. To avoid
deadlocks, if the attempt to acquire the config lock (reader) fails
in arc_read(), release the hash lock, wait for the config lock, and
retry from the beginning.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17071
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: SHENGYI HONG <aokblast@FreeBSD.org>
Closes#17088
It's included so it's effectively already part of it, but it's not
always installed as a userspace header, making zfs.h effectively
useless. Might as well just combine it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Close#17066
Linux 6.12 has conflicting range_tree_{find,destroy,clear} symbols.
Signed-off-by: Ivan Volosyuk <Ivan.Volosyuk@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Originally #16856 updated Linux Direct I/O requests to use the new
pin_user_pages API. However, it was an oversight that this PR only
handled iov_iter's of type ITER_IOVEC and ITER_UBUF. Other iov_iter
types may try and use the pin_user_pages API if it is available. This
can lead to panics as the iov_iter is not being iterated over correctly
in zfs_uio_pin_user_pages().
Unfortunately, generic iov_iter API's that call pin_user_page_fast() are
protected as GPL only. Rather than update zfs_uio_pin_user_pages() to
account for all iov_iter types, we can simply just call
zfs_uio_get_dio_page_iov_iter() if the iov_iter type is not ITER_IOVEC
or ITER_UBUF. zfs_uio_get_dio_page_iov_iter() calls the
iov_iter_get_pages() calls that can handle any iov_iter type.
In the future it might be worth using the exposed iov_iter iterator
functions that are included in the header iov_iter.h since v6.7. These
functions allow for any iov_iter type to be iterated over and advanced
while applying a step function during iteration. This could possibly be
leveraged in zfs_uio_pin_user_pages().
A new ZFS test case was added to test that a ITER_BVEC is handled
correctly using this new code path. This test case was provided though
issue #16956.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16956Closes#17006
Injecting a device probe failure is not possible by matching IO types,
because probe IO goes to the label regions, which is explicitly excluded
from injection. Even if it were possible, it would be awkward to do,
because a probe is sequence of reads and writes.
This commit adds a new IO "type" to match for injection, which looks for
the ZIO_FLAG_PROBE flag instead. Any probe IO will be match the
injection record and recieve the wanted error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
I'm about to add a new "type", and I need somewhere to put it!
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
Removed three unnecessary spaces in the definition of the
sa_attr_reg_t structure to improve code style consistency
and adhere to OpenZFS coding standards.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Peng Liu <littlenewton6@gmail.com>
Closes#16955
When building tests with zinject, it can be quite difficult to work out
if you're producing the right kind of IO to match the rules you've set
up.
So, here we extend injection records to count the number of times a
handler matched the operation, and how often an error was actually
injected (ie after frequency and other exclusions are applied).
Then, display those counts in the `zinject` output.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16938
#15793 wanted to make zfs_strerror threadsafe, unfortunately, it
turned out that strerror_l() usage was wrong, and also, some libc
implementations dont have strerror_l().
zfs_strerror() now simply calls original strerror() and copies the
result to a thread-local buffer, then returns that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Kojedzinszky <richard@kojedz.in>
Closes#15793Closes#16640Closes#16923
In Linux, block devices currently lack support for `copy_file_range`
API because the kernel does not provide the necessary functionality.
However, there is an ongoing upstream effort to address this
limitation: https://patchwork.kernel.org/project/dm-devel/cover/20240520102033.9361-1-nj.shetty@samsung.com/.
We have adopted this upstream kernel patch into the TrueNAS kernel and
made some additional modifications to enable block cloning specifically
for the zvol block device. This patch implements the platform-
independent portions of these changes for inclusion in OpenZFS.
This patch does not introduce any new functionality directly into
OpenZFS. The `TX_CLONE_RANGE` replay capability is only relevant when
zvols are migrated to non-TrueNAS systems that support Clone Range
replay in the ZIL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16901
There were checks still in place to verify we could completely use
iov_iter's on the Linux side. All interfaces are available as of kernel
4.18, so there is no reason to check whether we should use that
interface at this point. This PR completely removes the UIO_USERSPACE
type. It also removes the check for the direct_IO interface checks.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16856
cstyle can handle these cases now, so we don't need to disable it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16840
This also includes removing L2 vdevs asynchronously.
This commit also guarantees that spa_load_guid is unique.
The zpool reguid feature introduced the spa_load_guid, which is a
transient value used for runtime identification purposes in the ARC.
This value is not the same as the spa's persistent pool guid.
However, the value is seeded from spa_generate_load_guid() which
does not check for uniqueness against the spa_load_guid from other
pools. Although extremely rare, you can end up with two different
pools sharing the same spa_load_guid value! So we guarantee that
the value is always unique and additionally not still in use by an
async arc flush task.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16215
In some cases like dsl_dataset_hold_obj() it is possible to handle
those errors, so failure to hold dataset should be better than
kernel panic. Some other places where these errors are still not
handled but asserted should be less dangerous just as unreachable.
We have a user report about pool corruption leading to assertions
on these errors. Hopefully this will make behavior a bit nicer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16836
Some users might want to scrub only new data because they would like
to know if the new write wasn't corrupted. This PR adds possibility
scrub only newly written data.
This introduces new `last_scrubbed_txg` property, indicating the
transaction group (TXG) up to which the most recent scrub operation
has checked and repaired the dataset, so users can run scrub only
from the last saved point. We use a scn_max_txg and scn_min_txg
which are already built into scrub, to accomplish that.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Sponsored-By: Klara Inc.
Closes#16301
Should make no difference, just some dead code cleanup.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Martin Matuska <mm@FreeBSD.org>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16808
FreeBSD's libprocstat seems to build kernel code in user space,
which does not work here due to undefined vnode_t.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Martin Matuska <mm@FreeBSD.org>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16808
Without them the order of operations might get unexpected.
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16826
Previously vnode was not locked there, unlike Linux. It required
locking it in vn_flush_cached_data(), which recursed on the lock
if called from zfs_clone_range(), having the vnode locked.
Reviewed-by: Alan Somers <asomers@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16789Closes#16796
- With both pending and current AVL-trees being per-vdev and having
effectively identical comparison functions (pending tree compared
also birth time, but I don't believe it is possible for them to be
different for the same offset within one transaction group), it
makes no sense to move entries from one to another. Instead inline
dramatically simplified brt_entry_addref() into brt_pending_apply().
It no longer requires bv_lock, since there is nothing concurrent
to it at the time. And it does not need to search the tree for the
previous entries, since it is the same tree, we already have the
entry and we know it is unique.
- Put brt_vdev_lookup() and brt_vdev_addref() into different tree
traversals to avoid false positives in the first due to the second
entcount modifications. It saves dramatic amount of time when a
file cloned first time by not looking for non-existent ZAP entries.
- Remove avl_is_empty(bv_tree) check from brt_maybe_exists(). I
don't think it is needed, since by the time all added entries are
already accounted in bv_entcount. The extra check must be producing
too many false positives for no reason. Also we don't need bv_lock
there, since bv_entcount pointer must be table at this point, and
we don't care about false positive races here, while false negative
should be impossible, since all brt_vdev_addref() have already
completed by this point. This dramatically reduces lock contention
on massive deletes of cloned blocks. The only remaining one is
between multiple parallel free threads calling brt_entry_decref().
- Do not update ZAP if net change for a block over the TXG was 0.
In combination with above it makes file move between datasets as
cheap operation as originally intended if it fits into one TXG.
- Do not allocate vdevs on pool creation or import if it did not
have active block cloning. This allows to save a bit in few cases.
- While here, add proper error handling in brt_load() on pool
import instead of assertions.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16773
Without doing that there is a race window on export when history
log write by completed rebuild dirties transaction beyond final,
triggering assertion.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16714Closes#16782
Those values require global atomics to get current hash_elements
values in few of the hottest code paths, while in all the years I
never cared about it. If somebody wants, it should be easy to
get it by periodic sampling, since neither ARC header nor DBUF
counts change so fast that it would be difficult to catch.
For now I've left hash_elements_max kstat for ARC, since it was
used/reported by arc_summary and it would break older versions,
but now it just reports the current value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16759
It should be __VA_ARGS__, not __VA_ARGS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16780
While block cloning operation from the beginning was made per-vdev,
before this change most of its data were protected by two pool-
wide locks. It created lots of lock contention in many workload.
This change makes most of block cloning data structures per-vdev,
which allows to lock them separately. The only pool-wide lock now
it spa_brt_lock, protecting array of per-vdev pointers and in most
cases taken as reader. Also this splits per-vdev locks into three
different ones: bv_pending_lock protects the AVL-tree of pending
operations in open context, bv_mos_entries_lock protects BRT ZAP
object from while being prefetched, and bv_lock protects the rest
of per-vdev context during TXG commit process. There should be
no functional difference aside of some optimizations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16740
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16740
Small block workloads may use a very large number of dirty records.
During simple block cloning test due to BRT still using 4KB blocks
I can easily see up to 2.5M of those used. Before this change
dbuf_dirty_record_t structures representing them were allocated via
kmem_zalloc(), that rounded their size up to 512 bytes.
Introduction of specialized kmem cache allows to reduce the size
from 512 to 408 bytes. Additionally, since override and raw params
in dirty records are mutually exclusive, puting them into a union
allows to reduce structure size down to 368 bytes, increasing the
saving to 28%, that can be a 0.5GB or more of RAM.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16694
The macros `simd_stat_init()` and `simd_stat_fini()` in FreeBSD's
`simd.h` are defined as zero, but they are actually only used as
statements. Replace the definitions with `do {} while (0)` instead, to
avoid gcc `-Wunused-value` warnings.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Toomas Soome <tsoome@me.com>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#16693
On 64bit FreeBSD this reduces one from 296 to 280 bytes. On small
block workloads dbufs may consume gigabytes of ARC, and this saves
5% of it.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16684
All of our thread entry functions have this signature:
void (*)(void*) __attribute__((noreturn))
The low-level `__thread_create()` function accepts a `thread_func_t` as
the entry point, which is defined more simply as:
void (*)(void *)
And then the `thread_create()` and `thread_create_named()` macros cast
the passed-in function point down to `thread_func_t`, that is, casting
away the `noreturn` attribute.
Clang considers casting between these two types to be invalid because
both the caller and the callee may have elided parts of the stack frame
save and restore, knowing that they won't be needed.
Recent Linux appears to be setting `-Wcast-function-type-strict`, which
causes this invalid cast to emit a warning, which with `-Werror` is
converted to an error, breaking the build.
This commit fixes this in the simplest possible way: adding `noreturn`
to the `thread_func_t` attribute. Since all our thread entry functions
already have this attribute, it's arguably a just a consistency fix
anyway.
I considered removing the casts in the macros, which silences the
warnings, but it turns out that Clang has a bug that won't emit this
error for implicit conversions, only explicit casts. So leaving them
there seems like a reasonable belt-and-suspenders approach. Also,
frankly, this whole mechanism seems a little undercooked inside LLVM, so
I'm content go with my intuition about the smallest, least invaisve
change.
**NOTE**: `__thread_create` is exported by `spl.ko` and has a
`thread_func_t` arg, so this is an ABI break. Whether that matters in
practice, I have no idea.
Further reading:
- 1aad641c79
- https://github.com/llvm/llvm-project/issues/7325
- https://github.com/llvm/llvm-project/issues/41465
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16672Closes#16673
Some compiler/versions warn these typedefs according to #16660.
The platform specific header sys/abd_os.h shouldn't define or use abd_t,
as it's defined in its non-platform specific consumer sys/abd.h.
Do the same as what FreeBSD header does.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#16660Closes#16665
While mounting ZFS root during boot on Linux distributions from initrd,
mount from busybox is effectively used which executes mount system call
directly. This skips the ZFS helper mount.zfs, which checks and enables
the mount options as specified in dataset properties. As a result,
datasets mounted during boot from initrd do not have correct mount
options as specified in ZFS dataset properties.
There has been an attempt to use mount.zfs in zfs initrd script,
responsible for mounting the ZFS root filesystem (PR#13305). This was
later reverted (PR#14908) after discovering that using mount.zfs breaks
mounting of snapshots on root (/) and other child datasets of root have
the same issue (Issue#9461).
This happens because switching from busybox mount to mount.zfs correctly
parses the mount options but also adds 'mntpoint=/root' to the mount
options, which is then prepended to the snapshot mountpoint in
'.zfs/snapshot'. '/root' is the directory on Debian with initramfs-tools
where root filesystem is mounted before pivot_root. When Linux runtime
is reached, trying to access the snapshots on root results in
automounting the snapshot on '/root/.zfs/*', which fails.
This commit attempts to fix the automounting of snapshots on root, while
using mount.zfs in initrd script. Since the mountpoint of dataset is
stored in vfs_mntpoint field, we can check if current mountpoint of
dataset and vfs_mntpoint are same or not. If they are not same, reset
the vfs_mntpoint field with current mountpoint. This fixes the
mountpoints of root dataset and children in respective vfs_mntpoint
fields when we try to access the snapshots of root dataset or its
children. With correct mountpoint for root dataset and children stored
in vfs_mntpoint, all snapshots of root dataset are mounted correctly
and become accessible.
This fix will come into play only if current process, that is trying to
access the snapshots is not in chroot context. The Linux kernel API
that is used to convert struct path into char format (d_path), returns
the complete path for given struct path. It works in chroot environment
as well and returns the correct path from original filesystem root.
However d_path fails to return the complete path if any directory from
original root filesystem is mounted using --bind flag or --rbind flag
in chroot environment. In this case, if we try to access the snapshot
from outside the chroot environment, d_path returns the path correctly,
i.e. it returns the correct path to the directory that is mounted with
--bind flag. However inside the chroot environment, it only returns the
path inside chroot.
For now, there is not a better way in my understanding that gives the
complete path in char format and handles the case where directories from
root filesystem are mounted with --bind or --rbind on another path which
user will later chroot into. So this fix gets enabled if current
process trying to access the snapshot is not in chroot context.
With the snapshots issue fixed for root filesystem, using mount.zfs in
ZFS initrd script, mounts the datasets with correct mount options.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16646
The FreeBSD linux/compiler.h in OpenZFS was copied from a very old
version of FreeBSD's linuxkpi's linux/compiler.h. There's no need for
this duplication. Use FreeBSD's linuxkpi version instead, and provide
zfs_fallthrough to augment it (it's all that's needed). Use #pragma once
to avoid naming issues for guard variables. Since this is a complete
rewrite, use my copyright here (the original code in FreeBSD still
credits everybody). This works back at least to FreeBSD 12.4, which
is not out of support, and all newer releases.
Remove extra copies of macros that were defined elsewhere, but are now
properly defined in LinuxKPI so are redundant.
Sponsored-by: Netflix
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Closes#16650
Some C libraries, such as uClibc, do not provide strerror_l() in
which case we fallback to strerror().
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16636Closes#16640
This fixes an oversight in the Direct I/O PR. There is nothing that
stops a process from manipulating the contents of a buffer for a
Direct I/O read while the I/O is in flight. This can lead checksum
verify failures. However, the disk contents are still correct, and this
would lead to false reporting of checksum validation failures.
To remedy this, all Direct I/O reads that have a checksum verification
failure are treated as suspicious. In the event a checksum validation
failure occurs for a Direct I/O read, then the I/O request will be
reissued though the ARC. This allows for actual validation to happen and
removes any possibility of the buffer being manipulated after the I/O
has been issued.
Just as with Direct I/O write checksum validation failures, Direct I/O
read checksum validation failures are reported though zpool status -d in
the DIO column. Also the zevent has been updated to have both:
1. dio_verify_wr -> Checksum verification failure for writes
2. dio_verify_rd -> Checksum verification failure for reads.
This allows for determining what I/O operation was the culprit for the
checksum verification failure. All DIO errors are reported only on the
top-level VDEV.
Even though FreeBSD can write protect pages (stable pages) it still has
the same issue as Linux with Direct I/O reads.
This commit updates the following:
1. Propogates checksum failures for reads all the way up to the
top-level VDEV.
2. Reports errors through zpool status -d as DIO.
3. Has two zevents for checksum verify errors with Direct I/O. One for
read and one for write.
4. Updates FreeBSD ABD code to also check for ABD_FLAG_FROM_PAGES and
handle ABD buffer contents validation the same as Linux.
5. Updated manipulate_user_buffer.c to also manipulate a buffer while a
Direct I/O read is taking place.
6. Adds a new ZTS test case dio_read_verify that stress tests the new
code.
7. Updated man pages.
8. Added an IMPLY statement to zio_checksum_verify() to make sure that
Direct I/O reads are not issued as speculative.
9. Removed self healing through mirror, raidz, and dRAID VDEVs for
Direct I/O reads.
This issue was first observed when installing a Windows 11 VM on a ZFS
dataset with the dataset property direct set to always. The zpool
devices would report checksum failures, but running a subsequent zpool
scrub would not repair any data and report no errors.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16598
The function abd_alloc_from_pages() is used only in kernel.
Excluding sys/vm.h, and vm/vm_page.h includes avoids dependency
problems.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#16616
Our code reading/writing there may not handle misaligned accesses
on a platforms that may care about it. I don't see a point to
complicate it to satisfy UBSan in CI. This alignment costs nothing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15921Closes#16606
In a4b21eadec we added the zap_micro_max_size tuneable to raise the size
at which "micro" (single-block) ZAPs are upgraded to "fat" (multi-block)
ZAPs. Before this, a microZAP was limited to 128KiB, which was the old
largest block size. The side effect of raising the max size past 128KiB
is that it be stored in a large block, requiring the large_blocks
feature.
Unfortunately, this means that a backup stream created without the
--large-block (-L) flag to zfs send would split the microZAP block into
smaller blocks and send those, as is normal behaviour for large blocks.
This would be received correctly, but since microZAPs are limited to the
first block in the object by definition, the entries in the later blocks
would be inaccessible. For directory ZAPs, this gives the appearance of
files being lost.
This commit adds a feature flag, large_microzap, that must be enabled
for microZAPs to grow beyond 128KiB, and which will be activated the
first time that occurs. This feature is later checked when generating
the stream and if active, the send operation will abort unless
--large-block has also been requested.
Changing the limit still requires zap_micro_max_size to be changed. The
state of this flag effectively sets the upper value for this tuneable,
that is, if the feature is disabled, the tuneable will be clamped to
128KiB.
A stream flag is also added to ensure that the receiver also activates
its own feature flag upon receiving the stream. This is not strictly
necessary to _use_ the received microZAP, since it doesn't care how
large its block is, but it is required to send the microZAP object on,
otherwise the original problem occurs again.
Because it's difficult to reliably distinguish a microZAP from a fatZAP
from outside the ZAP code, and because it seems unlikely that most
users are affected (a fairly niche tuneable combined with what should be
an uncommon use of send), and for the sake of expediency, this change
activates the feature the first time a microZAP grows to use a large
block, and is never deactivated after that. This can be improved in the
future.
This commit changes nothing for existing pools that already have large
microZAPs. The feature will not be retroactively applied, but will be
activated the next time a microZAP grows past the limit.
Don't use large_blocks feature for enable/disable tests. The
large_microzap depends on large_blocks, so it gets enabled as a
dependency, breaking the test. Instead use feature "longname", which has
the exact same feature characteristics.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16593
In some environments, just making the .zfs control dir hidden from sight
might not be enough. In particular, the following scenarios might
warrant not allowing access at all:
- old snapshots with wrong permissions/ownership
- old snapshots with exploitable setuid/setgid binaries
- old snapshots with sensitive contents
Introducing a new 'disabled' value that not only hides the control dir,
but prevents access to its contents by returning ENOENT solves all of
the above.
The new property value takes advantage of 'iuv' semantics ("ignore
unknown value") to automatically fall back to the old default value when
a pool is accessed by an older version of ZFS that doesn't yet know
about 'disabled' semantics.
I think that technically the zfs_dirlook change is enough to prevent
access, but preventing lookups and dir entries in an already opened .zfs
handle might also be a good idea to prevent races when modifying the
property at runtime.
Add zfs_snapshot_no_setuid parameter to control whether automatically
mounted snapshots have the setuid mount option set or not.
this could be considered a partial fix for one of the scenarios
mentioned in desired.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Co-authored-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#3963Closes#16587
torvalds/linux@09022bc196 removes the flag, and the corresponding
SetPageError() and ClearPageError() macros, with no replacement offered.
Going back through the upstream history, use of this flag has been
gradually removed over the last year as part of the long tail of
converting everything to folios. Interesting tidbit comments from
torvalds/linux@29e9412b25 and torvalds/linux@420e05d0de suggest that
this flag has not been used meaningfully since page writeback failures
started being recorded in errseq_t instead (the whole "fsyncgate" thing,
~2017, around torvalds/linux@8ed1e46aaf).
Given that, it's possible that since perhaps Linux 4.13 we haven't been
getting anything by setting the flag. I don't know if that's true and/or
if there's something we should be doing instead, but my gut feel is that
its probably fine we only use the page cache as a proxy to allow mmap()
to work, rather than backing IO with it.
As such, I'm expecting that removing this will do no harm, but I'm
leaving it in for older kernels to maintain status quo, and if there is
an overall better way, that is left for a future change.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
linux/torvalds@11068e0b64 removes it, suggesting this was a always
there as a helper to handle concurrent seeks, which all filesystems now
handle themselves if necessary.
Without looking into the mechanism, I can imagine how it might have been
used, but we have always set it to zero and never read from it,
presumably because we've always tracked per-caller position through the
znode anyway. So I don't see how there can be any functional change for
us by removing it. I've stayed conservative though and left it in for
older kernels, since its clearly not hurting anything there.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
torvalds/linux@641bb4394f asserts that this is a static flag, not
intended to be variable per-file, so it moves it to
file_operations instead. We just change our check to follow.
No configure check is necessary because FOP_UNSIGNED_OFFSET didn't exist
before this commit, and FMODE_UNSIGNED_OFFSET flag is removed in the
same commit, so there's no chance of a conflict.
It's not clear to me that we need this check at all, as we never set
this flag on our own files, and I can't see any way that our llseek
handler could recieve a file from another filesystem. But, the whole
zpl_llseek() has a number of opportunities for pleasing cleanup that are
nothing to do with this change, so I'll leave that for a future change.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
torvalds/linux@b2e7456b5c makes kmem_cache_create() a macro, which
gets in the way of our our own redefinition, so we undef the macro first
for our own clients. This follows what we did for kmem_cache_alloc(),
see e951dba48.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
This patch adds the ability for zfs to support file/dir name up to 1023
bytes. This number is chosen so we can support up to 255 4-byte
characters. This new feature is represented by the new feature flag
feature@longname.
A new dataset property "longname" is also introduced to toggle longname
support for each dataset individually. This property can be disabled,
even if it contains longname files. In such case, new file cannot be
created with longname but existing longname files can still be looked
up.
Note that, to my knowledge native Linux filesystems don't support name
longer than 255 bytes. So there might be programs not able to work with
longname.
Note that NFS server may needs to use exportfs_get_name to reconnect
dentries, and the buffer being passed is limit to NAME_MAX+1 (256). So
NFS may not work when longname is enabled.
Note, FreeBSD vfs layer imposes a limit of 255 name lengh, so even
though we add code to support it here, it won't actually work.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#15921
