Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Doug Rabson <dfr@rabson.org>
Closes#14286Closes#14287
This fixes a kernel stack leak.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: Nicholas Sherlock <n.sherlock@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13778Closes#14255
We currently compute a 64-bit hash three times, which consumes 0.8% CPU
time on ARC eviction heavy workloads. Caching the 64-bit value in the
dbuf allows us to avoid that overhead.
Sponsored-By: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Closes#14251
If the fields to be listed and sorted by are constrained to those
populated by dsl_dataset_fast_stat(), then zfs list is much faster,
as it does not need to open each objset and reads its properties.
A previous optimization by Pawel Dawidek
(0cee24064a) took advantage
of this to make listing snapshot names sorted only by name much faster.
However, it was limited to `-o name -s name`, this work extends this
optimization to work with:
- name
- guid
- createtxg
- numclones
- inconsistent
- redacted
- origin
and could be further extended to any other properties supported by
dsl_dataset_fast_stat() or similar, that do not require extra locking
or reading from disk.
This was committed before (9a9e2e343dfa2af28bf7910de77ae73aa006de62),
but was reverted due to a regression when used with an older kernel.
If the kernel does not populate zc->zc_objset_stats, we now fallback
to getting the properties via the slower interface, to avoid problems
with newer userland and older kernels.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14110
zfs_zaccess_trivial() calls the generic_permission() to read
xattr attributes. This causes deadlock if called from
zpl_xattr_set_dir() context as xattr and the dent locks are
already held in this scenario. This commit skips the permissions
checks for extended attributes since the Linux VFS stack already
checks it before passing us the control.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14220
When inside a jail, visibility on datasets not "jailed" to the
jail is restricted. However, it was possible to enumerate all
datasets in the pool by looking at the kstats sysctl MIB.
Only the kstats corresponding to datasets that the user has
visibility on are accessible now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14254
Context:
We recently had a scenario where a customer with 2x10TB disks at 95+%
fragmentation and capacity, wanted to migrate their disks to a 2x20TB
setup. So they added the 2 new disks and submitted the removal of the
first 10TB disk. The removal took a lot more than expected (order of
more than a week to 2 weeks vs a couple of days) and once it was done it
generated a huge indirect mappign table in RAM (~16GB vs expected ~1GB).
Root-Cause:
The removal code calls `metaslab_alloc_dva()` to allocate a new block
for each evacuating block in the removing device and it tries to batch
them into 16MB segments. If it can't find such a segment it tries for
8MBs, 4MBs, all the way down to 512 bytes.
In our scenario what would happen is that `metaslab_alloc_dva()` from
the removal thread pick the new devices initially but wouldn't allocate
from them because of throttling in their metaslab allocation queue's
depth (see `metaslab_group_allocatable()`) as these devices are new and
favored for most types of allocations because of their free space. So
then the removal thread would look at the old fragmented disk for
allocations and wouldn't find any contiguous space and finally retry
with a smaller allocation size until it would to the low KB range. This
caused a lot of small mappings to be generated blowing up the size of
the indirect table. It also wasted a lot of CPU while the removal was
active making everything slow.
This patch:
Make all allocations coming from the device removal thread bypass the
throttle checks. These allocations are not even counted in the metaslab
allocation queues anyway so why check them?
Side-Fix:
Allocations with METASLAB_DONT_THROTTLE in their flags would not be
accounted at the throttle queues but they'd still abide by the
throttling rules which seems wrong. This patch fixes this by checking
for that flag in `metaslab_group_allocatable()`. I did a quick check to
see where else this flag is used and it doesn't seem like this change
would cause issues.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#14159
If the bp is NULL, we have a hole. However, when we build with
assertions, we will dereference bp when `blkid == DMU_SPILL_BLKID`. When
this happens on a hole, we will have a NULL pointer dereference.
Reported-by: Coverity (CID-1524670)
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14264
zio is never NULL when given to the vdev. Coverity complained saying:
"Either the check against null is unnecessary, or there may be a null
pointer dereference."
Reported-by: Coverity (CID-1466174)
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14263
dsl_dataset_snapshot_sync_impl() declares `static zil_header_t zero_zil
__maybe_unused;`, but this is also declared globally. This wastes
memory.
CodeQL's cpp/local-variable-hides-global-variable check caught this.
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14263
When processing abds, we execute 1 `kfpu_begin()`/`kfpu_end()` pair on
every page in the abd. This is wasteful and slows down checksum
performance versus what the benchmark claimed. We correct this by moving
those calls to the init and fini functions.
Also, we always check the buffer length against 0 before calling the
non-scalar checksum functions. This means that we do not need to execute
the loop condition for the first loop iteration. That allows us to
micro-optimize the checksum calculations by switching to do-while loops.
Note that we do not apply that micro-optimization to the scalar
implementation because there is no check in
`fletcher_4_incremental_native()`/`fletcher_4_incremental_byteswap()`
against 0 sized buffers being passed.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14247
I read the following article and noticed a couple of ZFS bugs mentioned:
https://pvs-studio.com/en/blog/posts/cpp/0377/
I decided to search for them in the modern OpenZFS codebase and then
found one that matched the description of the first one:
V593 Consider reviewing the expression of the 'A = B != C' kind. The
expression is calculated as following: 'A = (B != C)'. zfs_vfsops.c 498
The consequence of this is that the error value is replaced with `1`
when there is an error. When there is no error, 0 is correctly passed.
This is a very minor issue that is unlikely to cause any real problems.
The incorrect error code would either be returned to the mount command
on a failure or any of `zfs receive`, `zfs recv`, `zfs rollback` or `zfs
upgrade`.
The second one has already been fixed.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14261
When doing a device removal on a pool with gang blocks, the zio pipeline
can deadlock when trying to free blocks from a device which is being
removed with a stack similar to this:
0xffff8ab9a13a1740 UNINTERRUPTIBLE 4
__schedule+0x2e5
__schedule+0x2e5
schedule+0x33
schedule_preempt_disabled+0xe
__mutex_lock.isra.12+0x2a7
__mutex_lock.isra.12+0x2a7
__mutex_lock_slowpath+0x13
mutex_lock+0x2c
free_from_removing_vdev+0x61
metaslab_free_impl+0xd6
metaslab_free_dva+0x5e
metaslab_free+0x196
zio_free_sync+0xe4
zio_free_gang+0x38
zio_gang_tree_issue+0x42
zio_gang_tree_issue+0xa2
zio_gang_issue+0x6d
zio_execute+0x94
zio_execute+0x94
taskq_thread+0x23b
kthread+0x120
ret_from_fork+0x1f
Since there are gang blocks we have to read the gang members as part of
the free. This can be seen with a zio dependency tree that looks like
this:
sdb> echo 0xffff900c24f8a700 | zio -rc | zio
ADDRESS TYPE STAGE WAITER
0xffff900c24f8a700 NULL CHECKSUM_VERIFY 0xffff900ddfd31740
0xffff900c24f8c920 FREE GANG_ASSEMBLE -
0xffff900d93d435a0 READ DONE
In the illustration above we are processing frees but because of gang
block we have to read the constituents blocks. Once we finish the READ
in the zio pipeline we will execute the parent. In this case the parent
is a FREE but the zio taskq is a READ and we continue to process the
pipeline leading to the stack above. In the stack above, we are blocked
waiting for the svr_lock so as a result a READ interrupt taskq thread
is now consumed. Eventually, all of the READ taskq threads end up
blocked and we're unable to complete any read requests.
In zio_notify_parent there is an optimization to continue to use
the taskq thread to exectue the parent's pipeline. To resolve the
deadlock above, we only allow this optimization if the parent's
zio type matches the child which just completed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
External-issue: DLPX-80130
Closes#14236
After a device has been removed, any nopwrites for blocks on that
indirect vdev should be ignored and a new block should be allocated. The
original code attempted to handle this but used the wrong block pointer
when checking for indirect vdevs and failed to check all DVAs.
This change corrects both of these issues and modifies the test case
to ensure that it properly tests nopwrites with device removal.
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#14235
The checksum error counter is incremented after reporting to ZED. This
leads ZED to receiving a checksum error report with 0 checksum errors.
To avoid this, bump the checksum error counter before reporting to ZED.
Sponsored-by: Seagate Technology LLC
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Closes#14190
- Clang 15 doesn't support `-fno-ipa-sra` anymore. Do a separate
check for `-fno-ipa-sra` support by $KERNEL_CC.
- Don't enable `-mgeneral-regs-only` for certain module files.
Fix#13260
- Scope `GCC diagnostic ignored` statements to GCC only. Clang
doesn't need them to compile the code.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#13260Closes#14150
Squelch false positives reported by GCC 12 with UBSan.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#14150
Following facebook/zstd#2545, I noticed that one field in `seq_t` is
optional, and only used in combination with prefetching. (This may have
contributed to static analyzer failure to detect correct
initialization).
I then wondered if it would be possible to rewrite the code so that this
optional part is handled directly by the prefetching code rather than
delegated as an option into `ZSTD_decodeSequence()`.
This resulted into this refactoring exercise where the prefetching
responsibility is better isolated into its own function and
`ZSTD_decodeSequence()` is streamlined to contain strictly Sequence
decoding operations. Incidently, due to better code locality, it
reduces the need to send information around, leading to simplified
interface, and smaller state structures.
Port of facebook/zstd@f5434663ea
Reported-by: Coverity (CID 1462271)
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Ported-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14212
The bound check condition should always be met because we selected
`set_basic` as our encoding type. But that code is very far away, so
assert it is true so if it is ever false we can catch it, and add a
bounds check.
Port of facebook/zstd@1047097dad
Reported-by: Coverity (CID 1524446)
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Ported-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14212
When ZFS is built with assertions, a prefetch is done on a redacted
blkptr and `dpa->dpa_dnode` is NULL, we will have a NULL pointer
dereference in `dbuf_prefetch_indirect_done()`.
Both Coverity and Clang's Static Analyzer caught this.
Reported-by: Coverity (CID 1524671)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14210
range is always deferenced before it reaches this check, such that the
kmem_zalloc() call is never executed.
A previously version of this had erronously also pruned the
`range->eos_marker = B_TRUE` line, but it must be set whenever we
encounter an error or are cancelled early.
Coverity incorrectly complained about a potential NULL pointer
dereference because of this.
Reported-by: Coverity (CID 1524550)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14210
There was the series from me a year ago which fixed most of the
callback vs implementation prototype mismatches. It was based on
running the CFI-enabled kernel (in permissive mode -- warning
instead of panic) and performing a full ZTS cycle, and then fixing
all of the problems caught by CFI.
Now, Clang 16-dev has new warning flag, -Wcast-function-type-strict,
which detect such mismatches at compile-time. It allows to find the
remaining issues missed by the first series.
There are only two of them left: one for the
secpolicy_vnode_setattr() callback and one for taskq_dispatch().
The fix is easy, since they are not used anywhere else.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#14207
The port of lua to OpenZFS modified lua to use int64_t for numbers
instead of double. As part of this, a function for calculating
exponentiation was replaced with a bit shift. Unfortunately, it did not
handle negative values. Also, it only supported exponents numbers with
7 digits before before overflow. This supports exponents up to 15 digits
before overflow.
Clang's static analyzer reported this as "Result of operation is garbage
or undefined" because the exponent was negative.
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14204
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14199
Both vop_fsync and vfs_stdsync are effectively just costly no-ops
as they only act on ->v_bufobj.bo_dirty et al, which are unused
by zfs.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#14157
I've noticed that some of those counters are used in hot paths like
dnode_hold_impl(), and results of this change is visible in profiler.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14198
atomic_dec_32() should be a bit lighter than atomic_dec_32_nv().
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14200
If the attached disk already contains a vdev GUID, it
means the disk is not clean. In such a scenario, the
physical path would be a match that makes the disk
faulted when trying to online it. So, we would only
want to proceed if either GUID matches with the last
attached disk or the disk is in a clean state.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14181
These `sprintf()` calls are used repeatedly to write to a buffer. There
is no protection against overflow other than reviewers explicitly
checking to see if the buffers are big enough. However, such issues are
easily missed during review and when they are missed, we would rather
stop printing rather than have a buffer overflow, so we convert these
functions to use `kmem_scnprintf()`. The Linux kernel provides an entire
page for module parameters, so we are safe to write up to PAGE_SIZE.
Removing `sprintf()` from these functions removes the last instances of
`sprintf()` usage in our platform-independent kernel code. This improves
XNU kernel compatibility because the XNU kernel does not support
(removed support for?) `sprintf()`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14209
When mounting the root filesystem, vfs_t->mnt_vnodecovered is null
This will cause zfsctl_is_node() to dereference a null pointer when
mounting, or updating the mount flags, on the root filesystem, both
of which happen during the boot process.
Reported-by: Martin Matuska <mm@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14218
It is protected by z_hold_locks, so we do not need more serialization,
simple integer math should be fine.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#14196
In order for zed to process the removal event correctly,
udev change event needs to be posted to sync the blkid
information. spa_create() and spa_config_update() posts
the event already through spa_write_cachefile(). Doing
the same for spa_vdev_attach() that handles the case
for vdev attachment and replacement.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14172
We are not allowed to dirty a filesystem when done receiving
a snapshot. In this case the flag SPA_FEATURE_LARGE_BLOCKS will
not be set on that filesystem since the filesystem is not on
dp_dirty_datasets, and a subsequent encrypted raw send will fail.
Fix this by checking in dsl_dataset_snapshot_sync_impl() if the feature
needs to be activated and do so if appropriate.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#13699Closes#13782
In #13709, as in #11294 before it, it turns out that 63a26454 still had
the same failure mode as when it was first landed as d1d47691, and
fails to unlock certain datasets that formerly worked.
Rather than reverting it again, let's add handling to just throw out
the accounting metadata that failed to unlock when that happens, as
well as a test with a pre-broken pool image to ensure that we never get
bitten by this again.
Fixes: #13709
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The original ARC paper called for an initial 50/50 MRU/MFU split
and this is accounted in various places where arc_p = arc_c >> 1,
with further adjustment based on ghost lists size/hit. However, in
current code both arc_adapt() and arc_get_data_impl() aggressively
grow arc_p until arc_c is reached, causing unneeded pressure on
MFU and greatly reducing its scan-resistance until ghost list
adjustments kick in.
This patch restores the original behavior of initially having arc_p
as 1/2 of total ARC, without preventing MRU to use up to 100% total
ARC when MFU is empty.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#14137Closes#14120
f224eddf92 began dereferencing a NULL
checked pointer in zpl_vap_init(), which made Coverity complain because
either the dereference is unsafe or the NULL check is unnecessary. Upon
inspection, this pointer is guaranteed to never be NULL because it is
from the Linux kernel VFS. The calls into ZFS simply would not make
sense if this pointer were NULL, so the NULL check is unnecessary.
Reported-by: Coverity (CID 1527260)
Reported-by: Coverity (CID 1527262)
Reviewed-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14170
945b407486 neglected to `NULL` check
`tx->tx_objset`, which is already done in the function. This upset
Coverity, which complained about a "dereference after null check".
Upon inspection, it was found that whenever `dmu_tx_create_dd()` is
called followed by `dmu_tx_assign()`, such as in
`dsl_sync_task_common()`, `tx->tx_objset` will be `NULL`.
Reported-by: Coverity (CID 1527261)
Reviewed-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14170
Linux defaults to setting "failfast" on BIOs, so that the OS will not
retry IOs that fail, and instead report the error to ZFS.
In some cases, such as errors reported by the HBA driver, not
the device itself, we would wish to retry rather than generating
vdev errors in ZFS. This new property allows that.
This introduces a per vdev option to disable the failfast option.
This also introduces a global module parameter to define the failfast
mask value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Seagate Technology LLC
Submitted-by: Klara, Inc.
Closes#14056
The quota for ZVOLs is set to the size of the volume. When the quota
reaches the maximum, there isn't an excellent way to check if the new
writers are overwriting the data or if they are inserting a new one.
Because of that, when we reach the maximum quota, we wait till txg is
flushed. This is causing a significant fluctuation in bandwidth.
In the case of ZVOL, the quota is enforced by the volsize, so we
can omit it.
This commit adds a sysctl thats allow to control if the quota mechanism
should be enforced or not.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Zededa Inc.
Sponsored-by: Klara Inc.
Closes#13838
If there were no zil entries to replay, skip zil_close. zil_close waits
for a transaction to sync. That can take several seconds, for example
during pool import of a resilvering pool. Skipping zil_close can cut
the time for "zpool import" from 2 hours to 45 seconds on a resilvering
pool with a thousand zvols.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Sponsored-by: Axcient
Closes#13999Closes#14015
Linux 5.17 commit torvalds/linux@5dfbfe71e enables "the idmapping
infrastructure to support idmapped mounts of filesystems mounted
with an idmapping". Update the OpenZFS accordingly to improve the
idmapped mount support.
This pull request contains the following changes:
- xattr setter functions are fixed to take mnt_ns argument. Without
this, cp -p would fail for an idmapped mount in a user namespace.
- idmap_util is enhanced/fixed for its use in a user ns context.
- One test case added to test idmapped mount in a user ns.
Reviewed-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#14097
Require that ZFS_LEGACY_SUPPORT be defined for legacy ioctl support to
be built. For now, define it in zfs_ioctl_compat.h so support is always
built. This will allow systems that need never support pre-openzfs
tools a mechanism to remove support at build time. This code should
be removed once the need for tool compatability is gone.
No functional change at this time.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14127
vn_renamepath() is a Solaris-ism that was defined away in the FreeBSD
port. Now that the only use is in the FreeBSD zfs_vnops_os.c, drop it
entierly.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brooks Davis <brooks.davis@sri.com>
Closes#14127
Special vdevs should not be replaced by a hot spare.
Log vdevs already support this, extending the
functionality for special vdevs.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14129
Currently, only Blake3 x86 Asm code has signs of being ENDBR-aware.
At least, under certain conditions it includes some header file and
uses some custom macro from there.
Linux has its own NOENDBR since several releases ago. It's defined
in the same <asm/linkage.h>, so currently <sys/asm_linkage.h>
already is provided with it.
Let's unify those two into one %ENDBR macro. At first, check if it's
present already. If so -- use Linux kernel version. Otherwise, try
to go that second way and use %_CET_ENDBR from <cet.h> if available.
If no, fall back to just empty definition.
This fixes a couple more 'relocations to !ENDBR' across the module.
And now that we always have the latest/actual ENDBR definition, use
it at the entrance of the few corresponding functions that objtool
still complains about. This matches the way how it's used in the
upstream x86 core Asm code.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#14035
objtool properly complains that it can't decode some of the
instructions from ICP x86 Asm code. As mentioned in the Makefile,
where those object files were excluded from objtool check (but they
can still be visible under IBT and LTO), those are just constants,
not code.
In that case, they must be placed in .rodata, so they won't be
marked as "allocatable, executable" (ax) in EFL headers and this
effectively prevents objtool from trying to decode this data. That
reveals a whole bunch of other issues in ICP Asm code, as previously
objtool was bailing out after that warning message.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#14035
Commit 43569ee374 ("Fix objtool: missing int3 after ret warning")
addressed replacing all `ret`s in x86 asm code to a macro in the
Linux kernel in order to enable SLS. That was done by copying the
upstream macro definitions and fixed objtool complaints.
Since then, several more mitigations were introduced, including
Rethunk. It requires to have a jump to one of the thunks in order
to work, so the RET macro was changed again. And, as ZFS code
didn't use the mainline defition, but copied it, this is currently
missing.
Objtool reminds about it time to time (Clang 16, CONFIG_RETHUNK=y):
fs/zfs/lua/zlua.o: warning: objtool: setjmp+0x25: 'naked' return
found in RETHUNK build
fs/zfs/lua/zlua.o: warning: objtool: longjmp+0x27: 'naked' return
found in RETHUNK build
Do it the following way:
* if we're building under Linux, unconditionally include
<linux/linkage.h> in the related files. It is available in x86
sources since even pre-2.6 times, so doesn't need any conftests;
* then, if RET macro is available, it will be used directly, so that
we will always have the version actual to the kernel we build;
* if there's no such macro, we define it as a simple `ret`, as it
was on pre-SLS times.
This ensures we always have the up-to-date definition with no need
to update it manually, and at the same time is safe for the whole
variety of kernels ZFS module supports.
Then, there's a couple more "naked" rets left in the code, they're
just defined as:
.byte 0xf3,0xc3
In fact, this is just:
rep ret
`rep ret` instead of just `ret` seems to mitigate performance issues
on some old AMD processors and most likely makes no sense as of
today.
Anyways, address those rets, so that they will be protected with
Rethunk and SLS. Include <sys/asm_linkage.h> here which now always
has RET definition and replace those constructs with just RET.
This wipes the last couple of places with unpatched rets objtool's
been complaining about.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes#14035
There is an off by 1 error in the check. Fortunately, this function does
not appear to be used in kernel space, despite being compiled as part of
the kernel module. However, it is used in userspace. Callers of
lzc_ioctl_fd() likely will crash if they attempt to use the
unimplemented request number.
This was reported by FreeBSD's coverity scan.
Reported-by: Coverity (CID 1432059)
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14135
Some of our customers have been occasionally hitting zfs import failures
in Linux because udevd doesn't create the by-id symbolic links in time
for zpool import to use them. The main issue is that the
systemd-udev-settle.service that zfs-import-cache.service and other
services depend on is racy. There is also an openzfs issue filed (see
https://github.com/openzfs/zfs/issues/10891) outlining the problem and
potential solutions.
With the proper solutions being significant in terms of complexity and
the priority of the issue being low for the time being, this patch
exposes `zfs_vdev_open_timeout_ms` as a tunable so people that are
experiencing this issue often can increase it as a workaround.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#14133
