It's been many years, we can probably do without.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17376
In truenas_pylibzfs, we query list of encrypted datasets several times,
which is expensive. This commit exposes a public API zfs_is_encrypted()
to get encryption status from fast stat path without having to refresh
the properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17368
Before this change write log size TXG throttling mechanism was
accounting only user payload bytes. But the actual ZIL both on
disk and especially in memory include headers of hundred(s) of
bytes. Not accouting those may allow applications like
bonnie++, in their wisdom writing one byte at a time, to consume
excessive amount of memory and ZIL/SLOG in one TXG.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17373
Without this fix, zfs_range_tree_find_in could return an overlap when
the found range starts immediately after the searched range, with no
actual overlap.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17363
We don't really need to access space map to know where the metaslab
ends, while msp->ms_sm might be NULL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Fixes#17164Fixes#17359Closes#17361
This was caught when doing a manual check to see if #17352 needed to be
improved to catch mismatches across stack frames of the kind that were
first found in #17340.
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard@ryao.dev>
Closes#17353
Renamed in 6.2, and the compat wrapper removed in 6.15. No signature or
functional change apart from that, so a very minimal update for us.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17229
The intent is that the filesystem may have a reference to an "old"
version of the new directory, eg if it was keeping it alive because a
remote NFS client still had it open.
We don't need anything like that, so this really just changes things so
we return error codes encoded in pointers.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17229
d634d20d1b had been intended to fix a
potential information leak issue where the compiler's optimization
passes appeared to remove `memset()` operations that sanitize sensitive
data before memory is freed for use by the rest of the kernel.
When I wrote it, I had assumed that the compiler would not remove the
other `memset()` operations, but upon reflection, I have realized that
this was a bad assumption to make. I would rather have a very slight
amount of additional overhead when calling `gcm_clear_ctx()` than risk a
future compiler remove `memset()` calls. This is likely to happen if
someone decides to try doing link time optimization and the person will
not think to audit the assembly output for issues like this, so it is
best to preempt the possibility before it happens.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Richard Yao <richard@ryao.dev>
Closes#17343
Bisecting identified the redacted send/receive as the source of the bug
for issue #12014. Specifically the call to
dsl_dataset_hold_obj(&fromds) has been replaced by
dsl_dataset_hold_obj_flags() which passes a DECRYPT flag and creates
a key mapping. A subsequent dsl_dataset_rele_flag(&fromds) is missing
and the key mapping is not cleared. This may be inadvertedly used, which
results in arc_untransform failing with ECKSUM in:
arc_untransform+0x96/0xb0 [zfs]
dbuf_read_verify_dnode_crypt+0x196/0x350 [zfs]
dbuf_read+0x56/0x770 [zfs]
dmu_buf_hold_by_dnode+0x4a/0x80 [zfs]
zap_lockdir+0x87/0xf0 [zfs]
zap_lookup_norm+0x5c/0xd0 [zfs]
zap_lookup+0x16/0x20 [zfs]
zfs_get_zplprop+0x8d/0x1d0 [zfs]
setup_featureflags+0x267/0x2e0 [zfs]
dmu_send_impl+0xe7/0xcb0 [zfs]
dmu_send_obj+0x265/0x360 [zfs]
zfs_ioc_send+0x10c/0x280 [zfs]
Fix this by restoring the call to dsl_dataset_hold_obj().
The same applies for to_ds: here replace dsl_dataset_rele(&to_ds) with
dsl_dataset_rele_flags().
Both leaked key mappings will cause a panic when exporting the
sending pool or unloading the zfs module after a non-raw send from
an encrypted filesystem.
Contributions-by: Hank Barta <hbarta@gmail.com>
Contributions-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#12014Closes#17340
UIO_DIRECT means we can do Direct I/O, while DMU_DIRECTIO we want
to do it. First does not automatically means second. Add few
checks to not use Direct I/O in few cases we don't want it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17342
Loss of one indirect block of the meta dnode likely means loss of
the whole dataset. It is worse than one file that the man page
promises, and in my opinion is not much better than "none" mode.
This change restores redundancy of the meta-dnode indirect blocks,
while same time still corrects expectations in the man page.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17339
Currently, commands that resume a scrub/errorscrub from a paused state
don't get logged in the pool history. This is because resumes actually
return ECANCELED, instead of 0. This causes the tsd code in the common
ioctl logic to not think the ioctl succeeded, which causes the
log_history ioctl to fail with EPERM. However, for resuming a scrub from
a paused state, ECANCELED is success.
There are two options for how to deal with this. The first is the one
that I implemented here; I can't find a good reason for dmu_scan to
return ECANCELED on resume instead of 0, so let's just not. The only
place we check for the ECANCELED value is in zpool_scan, where we just
convert it back to zero. However, I am aware that this is changing an
ioctl interface, which I believe is a breaking change. I don't think
it's an important change, but maybe there is someone who relies on it.
The other option that could be implemented is to either allow ECANCELED
specifically from dsl_scan in the common ioctl code, or add a generic
facility to the common ioctl code that allows each command to specify
whether or not success happened, regardless of the return values. I am
open to feedback on which option people think would be better.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17301
On systems with enormous amounts of memory, the single arc_evict thread
can become a bottleneck if reads and writes are stuck behind it, waiting
for old data to be evicted before new data can take its place.
This commit adds support for evicting from multiple ARC lists in
parallel, by farming the evict work out to some number of threads and
then accumulating their results.
A new tuneable, zfs_arc_evict_threads, sets the number of threads. By
default, it will scale based on the number of CPUs.
Sponsored-by: Expensify, Inc.
Sponsored-by: Klara, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Youzhong Yang <youzhong@gmail.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Signed-off-by: Alexander Stetsenko <alex.stetsenko@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Co-authored-by: Rob Norris <rob.norris@klarasystems.com>
Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Co-authored-by: Alexander Stetsenko <alex.stetsenko@klarasystems.com>
Closes#16486
ARC target size might drop significantly under memory pressure,
especially if current ARC size was much smaller than the target.
Since dbuf cache size is a fraction of the target ARC size, it
might need eviction too. Aside of memory from the dbuf eviction
itself, it might help ARC by making more buffers evictable.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17314
Before Direct I/O was implemented, I've implemented lighter version
I called Uncached I/O. It uses normal DMU/ARC data path with some
optimizations, but evicts data from caches as soon as possible and
reasonable. Originally I wired it only to a primarycache property,
but now completing the integration all the way up to the VFS.
While Direct I/O has the lowest possible memory bandwidth usage,
it also has a significant number of limitations. It require I/Os
to be page aligned, does not allow speculative prefetch, etc. The
Uncached I/O does not have those limitations, but instead require
additional memory copy, though still one less than regular cached
I/O. As such it should fill the gap in between. Considering this
I've disabled annoying EINVAL errors on misaligned requests, adding
a tunable for those who wants to test their applications.
To pass the information between the layers I had to change a number
of APIs. But as side effect upper layers can now control not only
the caching, but also speculative prefetch. I haven't wired it to
VFS yet, since it require looking on some OS specifics. But while
there I've implemented speculative prefetch of indirect blocks for
Direct I/O, controllable via all the same mechanisms.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Fixes#17027
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Nothing modifies them, and nothing should, so lets try to enforce that.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
This allows to rewrite content of specified file(s) as-is without
modifications, but at a different location, compression, checksum,
dedup, copies and other parameter values. It is faster than read
plus write, since it does not require data copying to user-space.
It is also faster for sync=always datasets, since without data
modification it does not require ZIL writing. Also since it is
protected by normal range range locks, it can be done under any
other load. Also it does not affect file's modification time or
other properties.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
For UIO_ITER, we are just wrapping a kernel iterator. It will take care
of its own offsets if necessary. We don't need to do anything, and if we
do try to do anything with it (like advancing the iterator by the skip
in zfs_uio_advance) we're just confusing the kernel iterator, ending up
at the wrong position or worse, off the end of the memory region.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17298
db.db_mtx must be held any time that db.db_data is accessed. All of
these functions do have the lock held by a parent; add assertions to
ensure that it stays that way.
See https://github.com/openzfs/zfs/discussions/17118
* Refactor dbuf_read_bonus to make it obvious why db_rwlock isn't
required.
* Refactor dbuf_hold_copy to eliminate the db_rwlock
Copy data into the newly allocated buffer before assigning it to the db.
That way, there will be no need to take db->db_rwlock.
* Refactor dbuf_read_hole
In the case of an indirect hole, initialize the newly allocated buffer
before assigning it to the dmu_buf_impl_t.
Sponsored by: ConnectWise
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17209
Make zvol I/O requests processing asynchronous on FreeBSD side in some
cases. Clone zvol threading logic and required module parameters from
Linux side. Make zvol threadpool creation/destruction logic shared for
both Linux and FreeBSD.
The IO requests are processed asynchronously in next cases:
- volmode=geom: if IO request thread is geom thread or cannot sleep.
- volmode=cdev: if IO request passed thru struct cdevsw .d_strategy
routine, mean is AIO request.
In all other cases the IO requests are processed synchronously. The
volthreading zvol property is ignored on FreeBSD side.
Sponsored-by: vStack, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: @ImAwsumm
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17169
It's been dead ever since 5fa356ea44
Sponsored by: ConnectWise
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17119
These are only required to support these ioctls on Linux <4.5. Since
4.18 is our cutoff, we don't need this code anymore.
Also removing related test things that will never match again.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17308
SYSCTL_SIZEOF() has been introduced in FreeBSD by commit "sysctl(9):
Ease exporting struct sizes; Discourage doing that" (713abc9880aa) in
branch 'main'. It will soon be backported to 'stable/14'. We will thus
be able to remove the old, alternate version left in the '#else' branch
as soon as 'stable/13' goes out of support (April 30, 2026).
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17309
With certain combinations of target ARC states balance and ghost
hit rates it was possible to get the fractions outside of allowed
range. This patch limits maximum balance adjustment speed, which
should make it impossible, and also asserts it.
Fixes#17210
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When forced to resort to ganging, ZFS currently allocates three child
blocks, each one third of the size of the original. This is true
regardless of whether larger allocations could be made, which would
allow us to have fewer gang leaves. This improves performance when
fragmentation is high enough to require ganging, but not so high that
all the free ranges are only just big enough to hold a third of the
recordsize. This is also useful for improving the behavior of a future
change to allow larger gang headers.
We add the ability for the allocation codepath to allocate a range of
sizes instead of a single fixed size. We then use this to pre-allocate
the DVAs for the gang children. If those allocations fail, we fall back
to the normal write path, which will likely re-gang.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
txg_wait_synced_sig() is "wait for txg, unless a signal arrives". We
expect that future development will require similar "wait unless X"
behaviour.
This generalises the API as txg_wait_synced_flags(), where the provided
flags describe the events that should cause the call to return.
Instead of a boolean, the return is now an error code, which the caller
can use to know which event caused the call to return.
The existing call to txg_wait_synced_sig() is now
txg_wait_synced_flags(TXG_WAIT_SIGNAL).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
We should not clear scn_state and notify waiters until we call
vdev_dtl_reassess(), otherwise following offline/detach request
may fail with "no valid replicas".
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
It's possible for two spares to get attached to a single failed vdev.
This happens when you have a failed disk that is spared, and then you
replace the failed disk with a new disk, but during the resilver
the new disk fails, and ZED kicks in a spare for the failed new
disk. This commit checks for that condition and disallows it.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #16547Closes: #17231
### Background
Various admin operations will be invoked by some userspace task, but the
work will be done on a separate kernel thread at a later time. Snapshots
are an example, which are triggered through zfs_ioc_snapshot() ->
dsl_dataset_snapshot(), but the actual work is from a task dispatched to
dp_sync_taskq.
Many such tasks end up in dsl_enforce_ds_ss_limits(), where various
limits and permissions are enforced. Among other things, it is necessary
to ensure that the invoking task (that is, the user) has permission to
do things. We can't simply check if the running task has permission; it
is a privileged kernel thread, which can do anything.
However, in the general case it's not safe to simply query the task for
its permissions at the check time, as the task may not exist any more,
or its permissions may have changed since it was first invoked. So
instead, we capture the permissions by saving CRED() in the user task,
and then using it for the check through the secpolicy_* functions.
### Current implementation
The current code calls CRED() to get the credential, which gets a
pointer to the cred_t inside the current task and passes it to the
worker task. However, it doesn't take a reference to the cred_t, and so
expects that it won't change, and that the task continues to exist. In
practice that is always the case, because we don't let the calling task
return from the kernel until the work is done.
For Linux, we also take a reference to the current task, because the
Linux credential APIs for the most part do not check an arbitrary
credential, but rather, query what a task can do. See
secpolicy_zfs_proc(). Again, we don't take a reference on the task, just
a pointer to it.
### Changes
We change to calling crhold() on the task credential, and crfree() when
we're done with it. This ensures it stays alive and unchanged for the
duration of the call.
On the Linux side, we change the main policy checking function
priv_policy_ns() to use override_creds()/revert_creds() if necessary to
make the provided credential active in the current task, allowing the
standard task-permission APIs to do the needed check. Since the task
pointer is no longer required, this lets us entirely remove
secpolicy_zfs_proc() and the need to carry a task pointer around as
well.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Originally the Lustre ZFS OSD code was going to use zfs_uio_t structs
for supporting Direct I/O with ZFS. However, this has changed to using
abd_t structs instead. This exports the proper symbols that will be used
by the Lustre ZFS OSD code.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#17256
With the advent of fast dedup, there are no longer separate dedup tables
for different copies values. There is now logic that will add DVAs to
the dedup table entry if more copies are needed for new writes. However,
this interacts poorly with ganging. There are two different cases that
can result in mixed gang/non-gang BPs, which are illegal in ZFS.
This change modifies updates of existing FDT; if there are already gang
DVAs in the FDT, we prevent the new write from extending the DDT
entry. We cannot safely mix different gang trees in one block
pointer. if there are non-gang DVAs in the FDT, then this allocation may
not be gangs. If it would gang, we have to redo the whole write as a
non-dedup write.
This change also fixes a refcount leak that could occur if the lead DDT
write failed.
Sponsored by: iXsystems, Inc.
Sponsored-by: Klara, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes: #17123
Add nvlist_snprintf() to print a nvlist to a buffer. This is basically
the snprintf() version of dump_nvlist(). Along with that, add a
zfs_dbgmsg_nvlist() to print out an nvlist to dbgmsg. This will aid in
debugging.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17215
Fix build errors on Fedora 42 like:
module/zcommon/zfs_valstr.c:193:16: error: initializer-string for
array of 'char' truncates NUL terminator but destination lacks
'nonstring' attribute (3 chars into 2 available)
The arrays in zpool_vdev_os.c and zfs_valstr.c don't need to be
NULL terminated, but we do so to make GCC happy.
Closes: #17242
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
The 6.0 kernel removes the 'migratepage' VFS op. Check for
migratepage.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org
dbuf_prefetch_impl() should look on level of current indirect, not
the target prefetch level. dbuf_prefetch_indirect_done() should
call dnode_level_is_l2cacheable() if we have dpa_dnode to pass it.
It should fix some both false positive and negative L2ARC caching.
While there, fix redacted feature activation assertions. One was
always true, while another could give false positive if dpa_dnode
is NULL.
George Amanakis <gamanakis@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17204
When a dedup write fails, we try to roll the DDT entry back to a known
good state. However, this also rolls the refcounts and the last-update
time back to the state they were at when we started this write. This
doesn't appear to be able to cause any refcount leaks (after the fix in
17123). This PR prevents that from happening by only rolling back the
parts of the DDT entry that have been updated by the write so far.
Sponsored-by: iXsystems, Inc.
Sponsored-by: Klara, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update zfs userspace, groupspace, and projectspace to display the
default quotas when no per-ID specific quota is configured. This
ensures tool outputs align with enforced limits.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Ensure default user/group/project quotas are visible through quota
tools and filesystem stats when no per-ID quota is configured. This
maintains consistency between quota visibility and configured defaults.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update zfs_id_overobjquota() and zfs_id_overblockquota() to enforce
default user/group/project quotas (block and object-based) when no
per-user, per-group, or per-project quota exists. If a specific quota
is not configured for an ID, the default quota value is applied.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This adds default userquota, groupquota, and projectquota properties to
MASTER_NODE_OBJ to make them accessible during zfsvfs_init() (regular
DSL properties require dsl_config_lock, which cannot be safely acquired
in this context). The zfs_fill_zplprops_impl() logic is updated to read
these default properties directly from MASTER_NODE_OBJ.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When opening a vdev and setting the nonrot property, we used to wait for
each child to be opened before examining its nonrot property. When the
change was made to open vdevs asynchronously, we didn't move the nonrot
check out of the main loop. As a result, the nonrot property is almost
always set to false, regardless of the actual type of the underlying
disks. The fix is simply to move the nonrot check to a separate loop
after the taskq has been waited for.
Sponsored-by: Klara, Inc.
Sponsored-by: Eshtek, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
FreeBSD kernel's WITNESS code detected lock ordering violation in
spa_vdev_remove_cancel_sync(). It took svr_lock while holding
ms_lock, which is opposite to other places. I was thinking to
resolve it similar to #17145, but looking closer I don't think
we even need svr_lock at that point, since we already asserted
svr_allocd_segs is empty, and we don't need to add there segments
we are going to call free_mapped_segment_cb for.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17164
Since spa_dspace accounts only normal allocation class space,
spa_nonallocating_dspace should do the same. Otherwise we may get
negative overflow or respective assertion spa_update_dspace() if
removed special/dedup vdev is bigger than all normal class space.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17183
Firmly in the "shouldn't happen" camp, but at least GCC 7.4 (Ubuntu
18.04) complained about them, and it's easy to shut up, so do so.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17189
Previous code allowed each metaslab group to have different number
of allocators. But in practice it worked only for embedded SLOGs,
relying on a number of conditions and creating a significant mine
field if any of those change. I just stepped on one myself.
This change makes all groups to have spa_alloc_count allocators.
It may cost us extra 192 bytes of memory per normal top-level vdev
on large systems, but I find it a small price for cleaner and more
reliable code.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Fixes#17188
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
