Before this change ashift property was applied only to a leaf
vdevs. As result, it worked only as a minimal value for parent
vdevs, since bigger physical_ashift value reported by any child
could be used instead when deciding parent's ashift, as if the
ashift property was never set.
This change explicitly passes ZPOOL_CONFIG_ASHIFT to all vdevs,
allowing override for parents only if the passed value is below
logical_ashift and so unacceptable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17826
zpool_reopen_004_pos destroys a pool with an offline disk, leaving its
label intact. In TrueNAS local repo, zpool_reopen_005_pos is skipped,
causing zpool_reopen_007_pos to fail as it doesn't use -f flag when
creating pools unlike zpool_reopen_005_pos.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17831
The actual minimum hole size on ZFS is variable, but we always report
SPA_MINBLOCKSIZE, which is 512. This may lead applications to believe
that they can reliably create holes at 512-byte boundaries and waste
resources trying to punch holes that ZFS ends up filling anyway.
* In the general case, if the vnode is a regular file, return its
current block size, or the record size if the file is smaller than
its own block size. If the vnode is a directory, return the dataset
record size. If it is neither a regular file nor a directory,
return EINVAL.
* In the control directory case, always return EINVAL.
Signed-off-by: Dag-Erling Smørgrav <des@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17750
Resolve a build failure for user applications that include <sys/uio.h>.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shreshth Srivastava <shreshthsrivastava2@gmail.com>
Closes#17781Closes#17814
ZVOLs don't support all block layer IO request types. Add a check for
the IO types we do support. Also, remove references to
io_is_secure_erase() since they are not supported on ZVOLs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17803
Otherwise the compiler warns about it on production FreeBSD builds.
The routine proved resilient to attempts to ifdef on debug.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#17818
Previously, a bin included all blocks _starting_ from given size
(e.g., a "4K" bin would include all blocks within the [4K; 8K) region).
This is counter-intuitive and does not match the typical use-case of the
block histogram (that is, to estimate disk usage considering how ZFS'
block allocation works). In other words, if I'm looking at the "4K" row,
I'm interested in records that _fit into_ a 4K block.
Adjust the binning strategy such that a bin includes all blocks _up to_
given size, such that e.g. a "4K" bin would include all blocks within
the (2K; 4K] region.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes#16999
When counting blocks to generate block size histograms (`-bb`), accept a
`--class=` argument (as a comma-separated list of either "normal",
"special", "dedup" or "other") to only consider blocks that belong to
these metaslab classes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes#16999
When counting blocks to generate block size histograms (`-bb`), accept a
`--bin=` argument to force placing blocks into all three bins based on
*this* size.
E.g. with `--bin=lsize`, a block with lsize=512K, psize=128K, asize=256K
will be placed into the "512K" bin in all three output columns. This
way, by looking at the "512K" row the user will be able to determine
how well was ZFS able to compress blocks of this logical size.
Conversely, with `--bin=psize`, by looking at the "128K" row the user
will be able to determine how much overhead was incurred for storage
of blocks of this physical size.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes#16999
We are adding more long-only options, so use an enum for all of them
to avoid manually numbering these constants.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes#16999
In "all pools" mode, pool_iter_refresh() will call zpool_iter(), which
will call zpool_refresh_stats() before calling add_pool(). If we already
have the pool, this is a different handle, so we just release it and
return. Back in pool_iter_refresh(), we then call zpool_stats_refresh()
again for our handle on the same pool.
All together, this means we're doing two ZFS_IOC_POOL_STATS calls into
the kernel for every pool in the system. This isn't wrong, but it does
double the pressure on global locks.
Instead, we add a new function zpool_refresh_stats_from_handle() that
simply copies the pool config and state from one handle to another, and
use it to update our handle before we release it in add_pool(), so we
only have one call per pool per interval.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17807
zpool_iter() passes the callback a new instance of zpool_handle_t each
time, so the existing handle in the pool_list AVL never actually gets a
refresh. Internally, that means its zpool_config is never updated, and
the old config is never moved to zpool_old_config. As a result,
print_iostat() never sees any updated config, and so repeats the first
line forever.
This is the simplest workaround: just don't mark existing pools as
refreshed. pool_list_refresh() will see this and refresh them.
The downside is a second call to ZFS_IOC_POOL_STATS for existing pools,
because zpool_iter() just called it for the handle we threw away.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17807
When skipping the boot row (with -y), the early loop meant we weren't
updating the "last_npools" count. That means the count never advanced
past zero, so cb_iteration was always reset to 0, leading to it being
"stuck" on the boot line, printing the header and nothing else forever.
Updating the pool counter on every loop sorts that out: it advances,
cb_iteration moves properly, and normal rows are printed.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17807
If zfs_mount_and_share() fails, the error propagates to zfs create/clone
commands despite successful operation. If create/clone operations were
successful, there's no point in making zfs_mount_and_share() failures
fatal.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17799
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Igor Ostapenko <igor.ostapenko@klarasystems.com>
Closes#17793
Originally this was created for MMP, but now new cases are emerging
where the same mechanism is required. Hence the name's generalization.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Igor Ostapenko <igor.ostapenko@klarasystems.com>
Closes#17793
This adds a pause to the ZIO pipeline in the ready stage for
matching I/O (data, dnode, or raw bookmark).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#17787
When the default value of the xattr property was changed from 'dir' to
'sa', the code that displays the property's value was not affected. The
problem with this state of affairs is that 1) user tooling that
specifically looked for 'sa' before will be confused now that the code
displays 'on' instead. And 2) users may be confused when manually
running the commands about which specific type of xattr is in use unless
they are up to date on the latest zfs changes.
The fix here is to show the actual type always, rather than 'on' if we
happen to be using the default. This turns out to be easy to do, by
simply reordering the list of xattr values in the properties code. When
the property is displayed, we iterate down the table until we find a row
with a matching value, and use that row's name as the
display. Reordering the row fixes the display without affecting any
other code.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17801
When running zpool iostat in interval mode, it would not notice any new
pools created or imported, and would forget any destroyed or exported,
so would not notice if they came back. This leads to outputting "no
pools available" every interval until killed.
It looks like this was at least intended to work; the comment above
zpool_do_iostat() indicates that it is expected to "deal with pool
creation/destruction" and that pool_list_update() would detect new
pools. That call however was removed in 3e43edd2c5, though its unclear
if that broke this behaviour and it wasn't noticed, or if it never
worked, or if something later broke it. That said, the lack of
pool_list_update() is only part of the reason it doesn't work properly.
The fundamental problem is that the various things involved in
refreshing or updating the list of pools would aggressively ignore,
remove, skip or fail on pools that stop existing, or that already exist.
Mostly this meant that once a pool is removed from the list, it will
never be seen again. Restoring pool_list_update() to the
zpool_do_iostat() loop only partially fixes this - it would find "new"
pools again, but only in the "all pools" (no args) mode, and because its
iterator callback add_pool() would abort the iterator if it already has
a pool listed, it would only add pools if there weren't any already.
So, this commit reworks the structure somewhat. pool_list_update()
becomes pool_list_refresh(), and will ensure the state of all pools in
the list are updated. In the "all pools" mode, it will also add new
pools and remove pools that disappear, but when a fixed list of pools is
used, the list doesn't change, only the state of the pools within it.
The rest of the commit is adjusting things for this much simpler
structure. Regardless of the mode in use, pool_list_refresh() will
always do the right thing, so the driver code can just get on with the
display.
Now that pools can appear and disappear, I've made it so the header (if
enabled) is re-printed when the list changes, so that its easier to see
what's happening if the column widths change.
Since this is all rather complicated, I've included tests for the "all
pools" and "set of pools" modes.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17786
Add a -O option to zfs-test.sh to dump debug information on test
timeout. The debug info includes:
- 30 lines from 'top'
- /proc/<PID>/stack output of process with highest CPU usage
- Last lines strace-ing process with highest CPU usage
- /proc/sysrq-trigger kernel stack traces
All debug information gets dumped to /dev/kmsg (Linux only).
In addition, print out the VM console lines from the "Setup Testing
Machines" step. We have often see VMs timeout at this step and don't
know why.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17753
The zvol blk-mq codepaths would erroneously send FLUSH and TRIM
commands down the read codepath, rather than write. This fixes
the issue, and updates the zvol_misc_fua test to verify that
sync writes are actually happening.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17761Closes#17765
The Buildbot CI infrastructure has been fully replaced by GitHub
Actions. Remove any lingering references from the repository.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17794
Update the META file to reflect compatibility with the 6.17
kernel.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17789
When updating a Fedora instance to an experimental kernel make sure
to include the matching versioned perf and bpftool packages. This
helps ensure there are no unexpected conflicts which would prevent
the new packages from being installed.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17791
This change adds support for ZFS_KEYFORMAT_RAW to zdb_derive_key in
zdb.c. The implementation reads the raw key from the file specified
by the -K option which is consistent with how raw keys are handled in
the other parts of ZFS, along with a check to ensure that the keyfile
doesn't have too many bytes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Patrick Xia <patrickx@google.com>
Closes#17783
This changes the basic search algorithm from a single search up and down
the tree to a full depth-first traversal to handle conditions where the
tree matches at a higher level but not a lower level.
Normally higher level blocks always point to matching blocks, but there
are cases where this does not happen:
1. Racing block pointer updates from dbuf_write_ready.
Before f664f1ee7f (#8946), both dbuf_write_ready and
dnode_next_offset held dn_struct_rwlock which protected against
pointer writes from concurrent syncs.
This no longer applies, so sync context can f.e. clear or fill all
L1->L0 BPs before the L2->L1 BP and higher BP's are updated.
dnode_free_range in particular can reach this case and skip over L1
blocks that need to be dirtied. Later, sync will panic in
free_children when trying to clear a non-dirty indirect block.
This case was found with ztest.
2. txg > 0, non-hole case. This is #11196.
Freeing blocks/dnodes breaks the assumption that a match at a higher
level implies a match at a lower level when filtering txg > 0.
Whenever some but not all L0 blocks are freed, the parent L1 block is
rewritten. Its updated L2->L1 BP reflects a newer birth txg.
Later when searching by txg, if the L1 block matches since the txg is
newer, it is possible that none of the remaining L1->L0 BPs match if
none have been updated.
The same behavior is possible with dnode search at L0.
This is reachable from dsl_destroy_head for synchronous freeing.
When this happens open context fails to free objects leaving sync
context stuck freeing potentially many objects.
This is also reachable from traverse_pool for extreme rewind where it
is theoretically possible that datasets not dirtied after txg are
skipped if the MOS has high enough indirection to trigger this case.
In both of these cases, without backtracking the search ends prematurely
as ESRCH result implies no more matches in the entire object.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16025Closes#11196
Provide an interface to retrieve the lowest and highest minimum
allocation size for the normal allocation class. This can be used
by external consumers of the DMU to estimate potential wasted
capacity when setting the recordsize for an object.
The new "min_alloc" and "max_alloc" keys are added to the pool
configuration and used by default_volblocksize() to warn when
an ineffecient block size is requested. For older kmods which
don't yet include the new keys fallback to the previous logic.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17758
Three cases were discovered where 'zpool add' would fail to
warn when adding vdevs to a pool with a mismatched replication
level. These are:
1. When a pool contains mixed file and disk vdevs.
2. When a pool contains an active dRAID distributed spare
3. When a pool contains an active hot spare
The lack of warnings are caused by get_replication() assessing
the current pool configuration an inconsistent and disabling
the mismatched replication check for the new pool configuration
after 'zpool add'. This change updates get_replication() to
be slightly more tolerant in the non-fatal case.
The zpool_add_010_pos.ksh test case was split in to separate
tests: zpool_add_warn_create.ksh, pool_add_warn_degraded.ksh,
and zpool_add_warn_removal. These test were extended to
include coverage for dRAID pools and the three scenarios
described above.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17780
Modify the test case to use the `zfs mount` command instead
of directly calling the mount command, create a dedicated dataset,
and use the default mount point. These changes are intended to
preserve the intent of the original test case and resolve some
spurious mount failures which have been observed by the CI.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17785
Eliminates the need for the following workaround
> Add other drivers to dracut:
```
if grep mpt3sas /proc/modules; then
echo 'force_drivers+=" mpt3sas "' >> /etc/dracut.conf.d/zfs.conf
fi
if grep virtio_blk /proc/modules; then
echo 'filesystems+=" virtio_blk "' >> /etc/dracut.conf.d/fs.conf
fi
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jo Zzsi <jozzsicsataban@gmail.com>
Closes#17762
Spacemap entry might be too big to fit into a block pointer ashift.
We hit an assertion trying to run `zdb -bvy` on a large pool. But
it seems the code does not really need size there, since we only
need to search for a range of offsets, so setting it to zero should
just make btree return position just before the first entry. I
suspect the previous code could actually miss the first entry
due to this if its size was smaller.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17764
Update documentation to use the correct terminology.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: trick2011 <trick2011@users.noreply.github.com>
Closes#17734Closes#17755
zfs-helpers.sh is a utility script that sets up udev symlinks so you
can run ZTS from a local ZFS git workspace. However, it doesn't check
that the udev symlinks point to the current workspace. They may point
to an old workspace that has been deleted. This means the udev rules
never get executed, which in turn causes the zvol tests to fail.
This commit removes old symlinks that do not point to the current
ZFS workspace.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17766
This commit fixes the issue and includes the zfs kernel
module even when dracut is used in hostonly mode.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jo Zzsi <jozzsicsataban@gmail.com>
Closes#17754
This is breaking the build on FreeBSD/i386. Originally committed
downstream as https://github.com/freebsd/freebsd-src/commit/2d76470b701
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: ConnectWise
Closes#17705
On i386, Clang complains about misaligned atomic operations. Silence
these warnings to fix the build on FreeBSD/i386.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: ConnectWise
Closes#17708
Traditionally, unused dentries would be cached in the dentry cache until
the associated entry is no longer on disk. The cached dentry continues
to hold an inode reference, causing the inode to be pinned (see previous
commit).
Here we implement the dentry op d_delete, which is roughly analogous to
the drop_inode superblock op, and add a zfs_delete_dentry tunable to
control its behaviour. By default it continues the traditional
behaviour, but when the tunable is enabled, we signal that an unused
dentry should be freed immediately, releasing its inode reference, and
so allowing that inode to be deleted if no longer in use.
Sponsored-by: Klara, Inc.
Sponsored-by: Fastmail Pty Ltd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17746
Traditionally, unused inodes would be held on the superblock inode cache
until the associated on-disk file is removed or the kernel requests
reclaim. On filesystems with millions of rarely-used files, this can be
a lot of unusable memory.
Here we implement the superblock drop_inode method, and add a
zfs_delete_inode tunable to control its behaviour. By default it
continues the traditional behaviour, but when the tunable is enabled, we
signal that the inode should be deleted immediately when the last
reference is dropped, rather than cached. This releases the associated
data to the dbuf cache and ARC, allowing them to be reclaimed normally.
Sponsored-by: Klara, Inc.
Sponsored-by: Fastmail Pty Ltd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17746
As a quality assurance measure, `typeset` is added to local variable
declarations to actually enforce their intended scope.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: buzzingwires <buzzingwires@outlook.com>
Closes#17732
This commit fixes a likely regression introduced by 64db435 where the
checksum repair functionality (`-c` or default behavior) will perform
checks and access data associated with the newer undetach (`-u`)
functionality, resulting in a failure when an uberblock's TXG is not 0
as required by `-u` but not `-c`
Additionally, code is refactored for better separation of tasks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: buzzingwires <buzzingwires@outlook.com>
Closes#17732
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17747
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17747
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17747
