This is useful as debugging support, as it lets namespace lock
operations be traced directly. It will also be useful for future work to
reduce the use of spa_namespace_lock, traditionally a source of
difficult deadlocks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17906
FreeBSD now has a pathconf name called _PC_CASE_INSENSITIVE
used to check if a file system performs case insensitive
name lookups.
This patch adds support for this name.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17908
We need to specifically use the FX_XFLAG_* macros in zpl_ioctl_*attr()
codepaths, and the FS_*_FL macros in the zpl_ioctl_*flags() codepaths.
The earlier code just assumes the FS_*_FL macros for both codepaths.
The 6.17 kernel add a bitmask check in copy_fsxattr_from_user() that
exposed this error via failing 'projectquota' ZTS tests.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17884Closes#17869
In cases where all issued ZIOs must succeed, and we can't do
anything clever about the errors, we should just explicitly set
ZIO_FLAG_TRYHARD and let OS to do all the reasonable retries.
In other cases, where retries can be different from the original,
for example, some ZIOs are allowed to fail due to redundancy, or
we can disable aggregation on retrial to get at least some of
the data, we can do first pass without TRYHARD, and only if needed
retry with ZIO_FLAG_IO_RETRY (which implies TRYHARD semantics).
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17877
Over the time many of DMU functions got flags argument to control
prefetch, caching, etc. Few functions though left without it, even
though closer look shown that many of them do not require prefetch
due to their access pattern. This patch adds the flags argument to
dmu_write(), dmu_buf_hold_array() and dmu_buf_hold_array_by_bonus(),
passing DMU_READ_NO_PREFETCH where applicable.
I am going to also pass DMU_UNCACHEDIO to some of them later.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17872
In zio_crypt_key_wrap and zio_crypt_key_unwrap, the cuio_s variable was
not initialized before the calls to zfs_uio_init, leading to
uninitialized access to cuio_s.uio_offset. Initialize it to avoid gcc
warnings.
Similar issue as fixed in 2bf152021 ("Fix gcc uninitialized warning in
FreeBSD zio_crypt.c")
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17863
Initially, `zfs_getpages()` is provided with an array of busy pages by
the vnode pager. It then tries to acquire the range lock, but if there
is a concurrent `zfs_write()` running and fails to acquire that range
lock, it "unbusies" the pages to avoid a deadlock with `zfs_write()`.
After that, it grabs the pages again and retries to acquire the range
lock, and so on.
Once it got the range lock, it filters out valid pages, then copy DMU
data to the remaining invalid pages.
The problem is that freshly allocated zero'd pages it grabbed itself are
marked as valid. Therefore they are skipped by the second part of the
function and DMU data is never copied to these pages. This causes mapped
pages to contain zeros instead of the expected file content.
This was discovered while working on RabbitMQ on FreeBSD. I could
reproduce the problem easily with the following commands:
git clone https://github.com/rabbitmq/rabbitmq-server.git
cd rabbitmq-server/deps/rabbit
gmake distclean-ct RABBITMQ_METADATA_STORE=mnesia \
ct-amqp_client t=cluster_size_3:leader_transfer_stream_send
The testsuite fails because there is a sendfile(2) that can happen
concurrently to a write(2) on the same file. This leads to sendfile(2)
or read(2) (after the sendfile) sending/returning data with zeros, which
causes a function to crash.
The patch consists of not setting the `VM_ALLOC_ZERO` flag when
`zfs_getpages()` grabs pages again. Then, the last page is zero'd if it
is invalid, in case it would be partially filled with the end of the
file content. Other pages are either valid (and will be skipped) or they
will be entirely overwritten by the file content.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
Closes#17851
The actual minimum hole size on ZFS is variable, but we always report
SPA_MINBLOCKSIZE, which is 512. This may lead applications to believe
that they can reliably create holes at 512-byte boundaries and waste
resources trying to punch holes that ZFS ends up filling anyway.
* In the general case, if the vnode is a regular file, return its
current block size, or the record size if the file is smaller than
its own block size. If the vnode is a directory, return the dataset
record size. If it is neither a regular file nor a directory,
return EINVAL.
* In the control directory case, always return EINVAL.
Signed-off-by: Dag-Erling Smørgrav <des@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17750
zfs_aclset_common() might be called for newly created or not even
created vnodes, that triggers assertions on newer FreeBSD versions
with DEBUG_VFS_LOCKS included into INVARIANTS. In the first case
make sure to call vn_seqc_write_begin()/_end(), in the second just
skip the assertion.
The similar has to be done for project management IOCTL and file-
bases extended attributes, since those are not going through VFS.
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17722
FreeBSD now has a pathconf name called _PC_CLONE_BLKSIZE
which is the block size supported for block cloning for
the file system. Since ZFS's block size varies per file,
return the largest size likely to be used, or zero if block
cloning is not supported.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17645
zfsctl_root_readdir(): properly set eof.
readdir(): set *eofp to 1 on eof.
If there were no dirents to copy out, return EINVAL same as UFS.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Konstantin Belousov <kib@FreeBSD.org>
Closes#17655
zvol_state_lock is intended to protect access to the global name->zvol
lists (zvol_find_by_name()), but has also been used to control access to
OS-side private data, accessed through whatever kernel object is used to
represent the volume (gendisk, geom, etc).
This appears to have been necessary to some degree because the OS-side
object is what's used to get a handle on zvol_state_t, so zv_state_lock
and zv_suspend_lock can't be used to manage access, but also, with the
private object and the zvol_state_t being shutdown and destroyed at the
same time in zvol_os_free(), we must ensure that the private object
pointer only ever corresponds to a real zvol_state_t, not one in partial
destruction. Taking the global lock seems like a convenient way to
ensure this.
The problem with this is that zvol_state_lock does not actually protect
access to the zvol_state_t internals, so we need to take zv_state_lock
and/or zv_suspend_lock. If those are contended, this can then cause
OS-side operations (eg zvol_open()) to sleep to wait for them while hold
zvol_state_lock. This then blocks out all other OS-side operations which
want to get the private data, and any ZFS-side control operations that
would take the write half of the lock. It's even worse if ZFS-side
operations induce OS-side calls back into the zvol (eg creating a zvol
triggers a partition probe inside the kernel, and also a userspace
access from udev to set up device links). And it gets even works again
if anything decides to defer those ops to a task and wait on them, which
zvol_remove_minors_impl() will do under high load.
However, since the previous commit, we have a guarantee that the private
data pointer will always be NULL'd out in zvol_os_remove_minor()
_before_ the zvol_state_t is made invalid, but it won't happen until all
users are ejected. So, if we make access to the private object pointer
atomic, we remove the need to take a global lockout to access it, and so
we can remove all acquisitions of zvol_state_lock from the OS side.
While here, I've rewritten much of the locking theory comment at the top
of zvol.c. It wasn't wrong, but it hadn't been followed exactly, so I've
tried to describe the purpose of each lock in a little more detail, and
in particular describe where it should and shouldn't be used.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17625
When destroying a zvol, it is not "unpublished" from the system (that
is, /dev/zd* node removed) until zvol_os_free(). Under Linux, at the
time del_gendisk() and put_disk() are called, the device node may still
be have an active hold, from a userspace program or something inside the
kernel (a partition probe). As it is currently, this can lead to calls
to zvol_open() or zvol_release() while the zvol_state_t is partially or
fully freed. zvol_open() has some protection against this by checking
that private_data is NULL, but zvol_release does not.
This implements a better ordering for all of this by adding a new
OS-side method, zvol_os_remove_minor(), which is responsible for fully
decoupling the "private" (OS-side) objects from the zvol_state_t. For
Linux, that means calling put_disk(), nulling private_data, and freeing
zv_zso.
This takes the place of zvol_os_clear_private(), which was a nod in that
direction but did not do enough, and did not do it early enough.
Equivalent changes are made on the FreeBSD side to follow the API
change.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17625
Back in 2014 the zfs_autoimport_disable module option was added to
control whether the kmods should load the pool configs from the cache
file on module load. The default value since that time has been for
the kernel to not process the cache file.
Detecting and importing pools during boot is now controlled outside
of the kmod on both Linux and FreeBSD. By all accounts this has been
working well and we can remove this dormant code on the kernel side.
The spa_config_load() function is has been moved to userspace, it is
now only used by libzpool. Additionally, the spa_boot_init() hook
which was used by FreeBSD now looks to be used and was removed.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17618
Page writeback is considered completed when the associated itx callback
completes. A syncing writeback will receive the error in its callback
directly, but an in-flight async writeback that was promoted to sync by
the ZIL may also receive an error.
Writeback errors, even syncing writeback errors, are not especially
serious on their own, because the error will ultimately be returned to
the zil_commit() caller, either zfs_fsync() for an explicit sync op (eg
msync()) or to zfs_putpage() itself for a syncing (VM_PAGER_PUT_SYNC)
writeback.
The only thing we need to do when a page writeback fails is to skip
marking the page clean ("undirty"), since we don't know if it made it to
disk yet. This will ensure that it gets written out again in the future,
either some scheduled async writeback or another explicit syncing call.
On the other side, we need to make sure that if a syncing op arrives,
any changes on dirty pages are written back to the DMU and/or the ZIL
first. We do this by starting an async writeback on the vnode cache
first, so any dirty data has been recorded in the ZIL, ready for the
followup zfs_sync()->zil_commit() to find.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
ITX callbacks are used to signal that something can be cleaned up after
a itx is committed. Presently that's only used when syncing out mapped
pages (msync()) to mark dirty pages clean.
This extends the callback interface so it can be passed an error, and
take a different cleanup action if necessary.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
This changes zil_commit() to have an int return, and updates all callers
to check it. There are no corresponding internal changes yet; it will
always return 0.
Since zil_commit() is an indication that the caller _really_ wants the
associated data to be durability stored, I've annotated it with the
__warn_unused_result__ compiler attribute (via __must_check), to emit a
warning if it's ever ussd without doing something with the return code.
I hope this will mean we never misuse it in the future.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
All this machinery is there to try to understand when there an async
writeback waiting to complete because the intent log callbacks are still
outstanding, and force them with a timely zil_commit(). The next commit
fixes this properly, so there's no need for all this extra housekeeping.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584
Now zvol minors creation logic is passed thru spa_zvol_taskq, like it
is doing for remove/rename zvol minors functions. Appropriate
zvol minors creation functions are refactored:
- The zvol_create_minor()/zvol_minors_create_recursive() were removed.
- The single zvol_create_minors() is added instead.
Also, it become possible to collect zvol minors subtasks status, to
detect, if some zvol minor subtask is failed in the subtasks chain.
The appropriate message is reported to zfs_dbgmsg buffer in this case.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17575
Avoid calling dbuf_evict_one() from memory reclaim contexts (e.g. Linux
kswapd, FreeBSD pagedaemon). This prevents deadlock caused by reclaim
threads waiting for the dbuf hash lock in the call sequence:
dbuf_evict_one -> dbuf_destroy -> arc_buf_destroy
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Kaitlin Hoang <kthoang@amazon.com>
Closes#17561
Implement zvol_alloc() function on FreeBSD side to increase code base
compatibility with Linux. Also, fix issue with late returning in case
if volmode=none.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17482
FreeBSD commit 2ec2ba7e232d added the Solaris style syscall interface
for extended attributes. This patch wires this interface into the
FreeBSD ZFS port, since this style of extended attributes is supported
by OpenZFS internally when the "xattr" property is set to "dir".
Some specific changes:
LOOKUP_NAMED_ATTR is defined to indicate the need to set V_NAMEDATTR
for calls to zfs_zaccess().
V_NAMEDATTR indicates that the access checking does need to be done
for FreeBSD.
The access checking code for extended attributes was copy/pasted from
the Linux port into zfs_zaccess() in the FreeBSD port.
Most of the changes are in zfs_freebsd_lookup() and
zfs_freebsd_create().
The semantics of these functions should remain unchanged unless named
attributes are being manipulated.
All the code changes are enabled for __FreeBSD_version 1500040 and
newer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17540
Return from zvol_os_create_minor() function immediately after
dsl_prop_get_integer() call if volmode property value is set to
'none', like it is doing on Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17405
In syncing mode, zfs_putpages() would put the entire range of pages onto
the ZIL, then return VM_PAGER_OK for each page to the kernel. However,
an associated zil_commit() or txg sync had not happened at this point,
so the write may not actually be on disk.
So, we rework that case to use a ZIL commit callback, and do the
post-write work of undirtying the page and signaling completion there.
We return VM_PAGER_PEND to the kernel instead so it knows that we will
take care of it.
The original version of this (238eab7dc1) copied the Linux model and did
the cleanup in a ZIL callback for both async and sync. This was a
mistake, as FreeBSD does not have a separate "busy for writeback" flag
like Linux which keeps the page usable. The full sbusy flag locks the
entire page out until the itx callback fires, which for async is after
txg sync, which could be literal seconds in the future.
For the async case, the data is already on the DMU and the in-memory
ZIL, which is sufficient for async writeback, so the old method of
logging it without a callback, undirtying the page and returning is more
than sufficient and reclaims that lost performance.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17533
This causes async putpages to leave the pages sbusied for a long time,
which hurts concurrency. Revert for now until we have a better
approach.
This reverts commit 238eab7dc1.
Reported by: Ihor Antonov <ngor@hugpoint.tech>
Discussed with: Rob Norris <rob.norris@klarasystems.com>
References: freebsd/freebsd-src@738a9a7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Ported-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17533
In FreeBSD there is now a pathconf name _PC_HAS_HIDDENSYSTEM.
This patch adds support for it to OpenZFS.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17518
The field is subsequently accessed in zfs_mknode(), in
zfs_inherit_projid(). The Linux implementation of zfs_create_fs() has
this initialization already; there is no counterpart to
zfs_create_share_dir() that I can see.
Reported-by: KMSAN
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#17486
While FreeBSD itself does not support projects, there is no reason
why it can't be controlled via `zfs project` and other subcommands.
Most of the code is actually already there and just needs some
revival and sync with Linux, plus enabling some tests not depending
on the OS support.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17423
zfs_putpages() would put the entire range of pages onto the ZIL, then
return VM_PAGER_OK for each page to the kernel. However, an associated
zil_commit() or txg sync had not happened at this point, so the write
may not actually be on disk.
So, we rework it to use a ZIL commit callback, and do the post-write
work of undirtying the page and signaling completion there. We return
VM_PAGER_PEND to the kernel instead so it knows that we will take care
of it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
The module parameter name was not changed in FreeBSD sysctls
list: 'vfs.zfs.vol.mode'. Also, on Linux side the name is:
/sys/module/zfs/parameters/zvol_volmode.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17386
The module parameter now is represented in FreeBSD sysctls list
with name: 'vfs.zfs.vol.prefetch_bytes'. The default value is 131072,
same as on Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17385
The module parameter now is represented in FreeBSD sysctls list with
name: 'vfs.zfs.vol.inhibit_dev'. The default value is '0', same as on
Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17384
As commit 320f0c6 did for Linux, connect POSIX_FADV_WILLNEED
up to dmu_prefetch() on FreeBSD.
While there, fix portability problems in tests/functional/fadvise.
1. Instead of relying on the numerical values of POSIX_FADV_XXX macros,
accept macro names as arguments to the file_fadvise program. (The
numbers happen to match on Linux and FreeBSD, but future systems may
vary and it seems a little strange/raw to count on that.)
2. For implementation reasons, SEQUENTIAL doesn't reach ZFS via FreeBSD
VFS currently (perhaps something that should be investigated in
FreeBSD). Since on Linux we're treating SEQUENTIAL and WILLNEED the
same, it doesn't really matter which one we use, so switch the test
over to WILLNEED exercise the new prefetch code on both OSes the
same way.
Reviewed-by: Mateusz Guzik <mjg@FreeBSD.org>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Thomas Munro <tmunro@FreeBSD.org>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Closes#17379
Nothing in any FreeBSD code uses them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
By the assertion, vdev_geom_io_done() only expects ENXIO on an error
when the geom is a top-level (allocating) vdev[1][2]. However, zinject
currently can't insert ENXIO directly, possibly because on Solaris
outright disk failures were reported with EIO[2][3].
This is a narrow workaround to convert EIO to ENXIO when injections are
enabled, to avoid the assertion and allow the test suite to test
behaviour related to probe failure on FreeBSD.
1. freebsd/freebsd-src@37ec52ca7a
2. freebsd/freebsd-src@cd730bd6b2
3. illumos/illumos-gate@ea8dc4b6d2
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
Before Direct I/O was implemented, I've implemented lighter version
I called Uncached I/O. It uses normal DMU/ARC data path with some
optimizations, but evicts data from caches as soon as possible and
reasonable. Originally I wired it only to a primarycache property,
but now completing the integration all the way up to the VFS.
While Direct I/O has the lowest possible memory bandwidth usage,
it also has a significant number of limitations. It require I/Os
to be page aligned, does not allow speculative prefetch, etc. The
Uncached I/O does not have those limitations, but instead require
additional memory copy, though still one less than regular cached
I/O. As such it should fill the gap in between. Considering this
I've disabled annoying EINVAL errors on misaligned requests, adding
a tunable for those who wants to test their applications.
To pass the information between the layers I had to change a number
of APIs. But as side effect upper layers can now control not only
the caching, but also speculative prefetch. I haven't wired it to
VFS yet, since it require looking on some OS specifics. But while
there I've implemented speculative prefetch of indirect blocks for
Direct I/O, controllable via all the same mechanisms.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Fixes#17027
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
This allows to rewrite content of specified file(s) as-is without
modifications, but at a different location, compression, checksum,
dedup, copies and other parameter values. It is faster than read
plus write, since it does not require data copying to user-space.
It is also faster for sync=always datasets, since without data
modification it does not require ZIL writing. Also since it is
protected by normal range range locks, it can be done under any
other load. Also it does not affect file's modification time or
other properties.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Make zvol I/O requests processing asynchronous on FreeBSD side in some
cases. Clone zvol threading logic and required module parameters from
Linux side. Make zvol threadpool creation/destruction logic shared for
both Linux and FreeBSD.
The IO requests are processed asynchronously in next cases:
- volmode=geom: if IO request thread is geom thread or cannot sleep.
- volmode=cdev: if IO request passed thru struct cdevsw .d_strategy
routine, mean is AIO request.
In all other cases the IO requests are processed synchronously. The
volthreading zvol property is ignored on FreeBSD side.
Sponsored-by: vStack, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: @ImAwsumm
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17169
SYSCTL_SIZEOF() has been introduced in FreeBSD by commit "sysctl(9):
Ease exporting struct sizes; Discourage doing that" (713abc9880aa) in
branch 'main'. It will soon be backported to 'stable/14'. We will thus
be able to remove the old, alternate version left in the '#else' branch
as soon as 'stable/13' goes out of support (April 30, 2026).
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17309
When forced to resort to ganging, ZFS currently allocates three child
blocks, each one third of the size of the original. This is true
regardless of whether larger allocations could be made, which would
allow us to have fewer gang leaves. This improves performance when
fragmentation is high enough to require ganging, but not so high that
all the free ranges are only just big enough to hold a third of the
recordsize. This is also useful for improving the behavior of a future
change to allow larger gang headers.
We add the ability for the allocation codepath to allocate a range of
sizes instead of a single fixed size. We then use this to pre-allocate
the DVAs for the gang children. If those allocations fail, we fall back
to the normal write path, which will likely re-gang.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
### Background
Various admin operations will be invoked by some userspace task, but the
work will be done on a separate kernel thread at a later time. Snapshots
are an example, which are triggered through zfs_ioc_snapshot() ->
dsl_dataset_snapshot(), but the actual work is from a task dispatched to
dp_sync_taskq.
Many such tasks end up in dsl_enforce_ds_ss_limits(), where various
limits and permissions are enforced. Among other things, it is necessary
to ensure that the invoking task (that is, the user) has permission to
do things. We can't simply check if the running task has permission; it
is a privileged kernel thread, which can do anything.
However, in the general case it's not safe to simply query the task for
its permissions at the check time, as the task may not exist any more,
or its permissions may have changed since it was first invoked. So
instead, we capture the permissions by saving CRED() in the user task,
and then using it for the check through the secpolicy_* functions.
### Current implementation
The current code calls CRED() to get the credential, which gets a
pointer to the cred_t inside the current task and passes it to the
worker task. However, it doesn't take a reference to the cred_t, and so
expects that it won't change, and that the task continues to exist. In
practice that is always the case, because we don't let the calling task
return from the kernel until the work is done.
For Linux, we also take a reference to the current task, because the
Linux credential APIs for the most part do not check an arbitrary
credential, but rather, query what a task can do. See
secpolicy_zfs_proc(). Again, we don't take a reference on the task, just
a pointer to it.
### Changes
We change to calling crhold() on the task credential, and crfree() when
we're done with it. This ensures it stays alive and unchanged for the
duration of the call.
On the Linux side, we change the main policy checking function
priv_policy_ns() to use override_creds()/revert_creds() if necessary to
make the provided credential active in the current task, allowing the
standard task-permission APIs to do the needed check. Since the task
pointer is no longer required, this lets us entirely remove
secpolicy_zfs_proc() and the need to carry a task pointer around as
well.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Ensure default user/group/project quotas are visible through quota
tools and filesystem stats when no per-ID quota is configured. This
maintains consistency between quota visibility and configured defaults.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This adds default userquota, groupquota, and projectquota properties to
MASTER_NODE_OBJ to make them accessible during zfsvfs_init() (regular
DSL properties require dsl_config_lock, which cannot be safely acquired
in this context). The zfs_fill_zplprops_impl() logic is updated to read
these default properties directly from MASTER_NODE_OBJ.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This extends the existing special-case for zfs/poolname to split and
create any number of intermediate sysctl names, so that multi-level
module names are possible.
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
