In addition to hotplug events, the kernel may also mark a failing vdev
as REMOVED. This was observed in a customer report and reproduced by
forcing the NVMe host driver to disable the device after a failed reset
due to command timeout. In such cases, the spare was not activated
because the device had already transitioned to a REMOVED state before
zed processed the event.
To address this, explicitly attempt hot spare activation when the
kernel marks a device as REMOVED.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17187
When after device removal we handle block pointers remap, skip blocks
that might be cloned. BRTs are indexed by vdev id and offset from
block pointer's DVA[0]. So if we start addressing the same block by
some different DVA, we won't get the proper reference counter. As
result, we might either remap the block twice, that may result in
assertion during indirect mapping condense, or free it prematurely,
that may result in data overwrite, or free it twice, that may result
in assertion in spacemap code.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15604Closes#17180
It turns out that approach taken in the original version of the patch
was wrong. So now, we're taking approach in-line with how kernel
actually does it - when sb is being torn down, access to it
is serialized via sb->s_umount rwsem, only when that lock is taken
is it okay to work with s_flags - and the other mistake I was doing
was trying to make SB_ACTIVE work, but apparently the kernel checks
the negative variant - not SB_DYING and not SB_BORN.
Kernels pre-6.6 don't have SB_DYING, but check if sb is hashed
instead.
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
spa_vdev_remove_thread() should not hold svr_lock while loading a
metaslab. It may block ZIO threads, required to handle metaslab
loading, at least in case of read errors causing recovery writes.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17145
The vd->vdev_ms access can overflow due to on-disk corruption, not just
due to programming bugs. So it makes sense to check its boundaries even
in production builds.
Sponsored by: ConnectWise
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17136
This helps to avoids confusion with the similarly-named
txg_wait_synced().
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
People have noted there's no way to remove a pool userprop, only zero
it. Turns vdev userprops had a method, by setting empty-string. So this
makes pool userprops follow the same behaviour.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16887
Force receive (zfs receive -F) can rollback or destroy snapshots and
file systems that do not exist on the sending side (see zfs-receive man
page). This means an user having the receive permission can effectively
delete data on receiving side, even if such user does not have explicit
rollback or destroy permissions.
This patch adds the receive:append permission, which only permits
limited, non-forced receive. Behavior for users with full receive
permission is not changed in any way.
Fixes#16943
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#17015
Implementation of DDT pruning introduced verification of DVAs in
a block pointer during ddt_lookup() to not by mistake free previous
pruned incarnation of the entry. But when writing a new block in
zio_ddt_write() we might have the DVAs only from override pointer,
which may never have "D" flag to be confused with pruned DDT entry,
and we'll abandon those DVAs if we find a matching entry in DDT.
This fixes deduplication for blocks written via dmu_sync() for
purposes of indirect ZIL write records, that I have tested. And
I suspect it might actually allow deduplication for Direct I/O,
even though in an odd way -- first write block directly and then
delete it later during TXG commit if found duplicate, which part
I haven't tested.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17120
This statx(2) mask returns the alignment restrictions for O_DIRECT
access on the given file.
We're expected to return both memory and IO alignment. For memory, it's
always PAGE_SIZE. For IO, we return the current block size for the file,
which is the required alignment for an arbitrary block, and for the
first block we'll fall back to the ARC when necessary, so it should
always work.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16972
Now instead of crashing when attempting to read the corrupt block
pointer, ZFS will return ECKSUM, in a stack that looks like this:
```
none:set-error
zfs.ko`arc_read+0x1d82
zfs.ko`dbuf_read+0xa8c
zfs.ko`dmu_buf_hold_array_by_dnode+0x292
zfs.ko`dmu_read_uio_dnode+0x47
zfs.ko`zfs_read+0x2d5
zfs.ko`zfs_freebsd_read+0x7b
kernel`VOP_READ_APV+0xd0
kernel`vn_read+0x20e
kernel`vn_io_fault_doio+0x45
kernel`vn_io_fault1+0x15e
kernel`vn_io_fault+0x150
kernel`dofileread+0x80
kernel`sys_read+0xb7
kernel`amd64_syscall+0x424
kernel`0xffffffff810633cb
```
This patch should hopefully also prevent such corrupt block pointers
from being written to disk in the first place.
And in zdb, don't crash when printing a block pointer with no valid
DVAs. If a block pointer isn't embedded yet doesn't have any valid
DVAs, that's a data corruption bug. zdb should be able to handle the
situation gracefully.
Finally, remove an extra check for gang blocks in SNPRINTF_BLKPTR. This
check, which compares the asizes of two different DVAs within the same
BP, was added by illumos-gate commit b24ab67[^1], and I can't understand
why. It doesn't appear to do anything useful, so remove it.
[^1]: b24ab67627
Fixes #17077
Sponsored by: ConnectWise
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17078
PR #14161 made spa_do_crypt_objset_mac_abd() to ignore MAC errors
if local MAC can not be calculated at the time. But it does not
mean we should also ignore portable MAC errors there.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17122
Adding fields to zinject_record_t unexpectedly extended zfs_cmd_t,
preventing some things working properly with 2.3.1 userspace tools
against 2.3.0 kernel module.
This reverts commit fabdd502f4.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
In l2arc_evict(), the config lock may be acquired in reverse order
(e.g., first the config lock (writer), then a hash lock) unlike in
arc_read() during scenarios like L2ARC device removal. To avoid
deadlocks, if the attempt to acquire the config lock (reader) fails
in arc_read(), release the hash lock, wait for the config lock, and
retry from the beginning.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17071
Don't try to get mg of hole vdev in removal
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17080
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: SHENGYI HONG <aokblast@FreeBSD.org>
Closes#17088
Before this change zfs_metaslab_switch_threshold tunable switched
metaslabs each time ones index reduced by two (which means biggest
contiguous chunk reduced to 1/4). It is a good idea to balance
metaslabs fragmentation. But for empty metaslabs (having power-
of-2 sizes) this means switching when they get just below the half
of their capacity. Inspection with zdb after filling new pool to
half capacity shown most of its metaslabs filled to half capacity.
I consider this sub-optimal for pool fragmentation in a long run.
This change blocks the metaslabs switching if most of the metaslab
free space (15/16) is represented by a single contiguous range.
Such metaslab should not be considered fragmented until it actually
fail some big allocation. More contiguous filling should improve
data locality and increase time before previously filled and
partially freed metaslab is touched again, giving it more time to
free more contiguous chunks for lower fragmentation. It should
also slightly reduce spacemap traffic.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17081
zfs_file_fsync() and zfs_file_deallocate() are both blocking ops, so the
zio_taskq thread is active and blocked both while waiting for the IO
call and then while calling zio_execute() for the next stage. This is a
particular issue for FLUSH, as the z_flush_iss queue typically only has
one thread; multiple flushes arriving at once can cause long delays if
the underlying fsync() response is particularly slow.
To fix this, we dispatch both FLUSH and TRIM to the z_vdev_file taskq,
just as we do for reads and writes. Further, we return all results
through zio_interrupt(), so neither the issue nor the file taskqs are
blocked.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17064
Need to use arc_free_data_abd to free abd type buffer.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#17079
Kernel & userspace specifics are in zfs_file_os.c, so there's no
particular reason these have to be separate.
The one platform-specific part is in the Linux kernel part, to offload
flushes to a taskq if we're already inside a filesystem transaction.
This would be normally be an unsatisfying wart, but I'm intending to
remove this shortly, so I'm content to leave it gated for the moment.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Since we are calculating a free space fragmentation, we should
weight metaslabs by the amount of their free space, not a full
size. Fragmentation of full metaslabs may not matter in presence
empty ones. The old algorithm did not differentiate metaslabs
having only one free 4KB block from metaslabs having 50% of space
free in 4KB blocks, reporting higher fragmentation.
While there, move metaslab_group_alloc_update() call after setting
mg_fragmentation, otherwise the effect may be delayed by one TXG.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Linux 6.12 has conflicting range_tree_{find,destroy,clear} symbols.
Signed-off-by: Ivan Volosyuk <Ivan.Volosyuk@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
skc->skc_name also needs to be freed in an error path.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Vandana Rungta <vrungta@amazon.com>
Closes#17041
The purpose of no-op is to simulate a failure between a device cache and
its permanent store. We still want it to go through the queue and
respond in the same way to everything else.
So, inject "success" as the very last thing, and then move on to
VDEV_IO_DONE to be dequeued and so any followup work can occur.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17029
"DESTDIR=/path/to/target/root/ make install" may fail when installing to
a root that contains an existing lib/modules structure. When run as root
we may even affect the wrong kernel (the build system's one, or, if
running a different version, some other directory in /lib/modules, but
not the desired one installed in DESTDIR).
Add a missing reference to the INSTALL_MOD_PATH root when calling
"depmod" during "make install"
Also add a switch "DONT_DELETE_MODULES_FILES=1" that skips the removal
of files named "modules.*" prior to running depmod.
Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
Closes#16994
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Gang blocks have a significant impact on the long and short term
performance of a zpool, but there is not a lot of observability into
whether they're being used. This change adds gang-specific kstats to
ZFS, to better allow users to see whether ganging is happening.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17003
When you are using large recordsizes in conjunction with raidz, with
incompressible data, you can pretty reliably be making 21 MB
allocations. Unfortunately, the fragmentation metric in ZFS considers
any metaslabs with 16 MB free chunks completely unfragmented, so you can
have a metaslab report 0% fragmented and be unable to satisfy an
allocation. When using the segment-based metaslab weight, this is
inconvenient; when using the space-based one, it can seriously degrade
performance.
We expand the fragmentation table to extend up to 512MB, and redefine
the table size based on the actual table, rather than having a static
define. We also tweak the one variable that depends on fragmentation
directly.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#16986
According to the upstream change, all callers set it, and all block
devices either honoured it or ignored it, so removing it entirely allows
a bunch of handling for the "unset" case to be removed, and it becomes
effectively implied.
We follow suit, and keep setting it for older kernels.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This is a convenience for filesystems that need the inode of their
parent or their own name, as its often complicated to get that
information. We don't need those things, so this is just detecting which
prototype is expected and adjusting our callback to match.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
As zios are reexecuted after resume from suspension, their ready and
wait states need to be propagated to wait counts on all their parents.
It's possible for those parents to have active children passing through
READY or DONE, which then end up in zio_notify_parent(), take their
parent's lock, and decrement the wait count. Without also taking a lock
here, it's possible for an increment race to occur, which leads to
either there being no references left (tripping the assert in
zio_notify_parent()), or a parent waiting forever for a nonexistent
child to complete.
To protect against this, we simply take the appropriate zio locks in
zio_reexecute() before updating the wait counts.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17016
This change will prevent prefetch to perform unnecessary ARC buffer
fill when reading from disk.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Jaydeep Kshirsagar <jkshirsagar@maxlinear.com>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Closes#17013
Originally #16856 updated Linux Direct I/O requests to use the new
pin_user_pages API. However, it was an oversight that this PR only
handled iov_iter's of type ITER_IOVEC and ITER_UBUF. Other iov_iter
types may try and use the pin_user_pages API if it is available. This
can lead to panics as the iov_iter is not being iterated over correctly
in zfs_uio_pin_user_pages().
Unfortunately, generic iov_iter API's that call pin_user_page_fast() are
protected as GPL only. Rather than update zfs_uio_pin_user_pages() to
account for all iov_iter types, we can simply just call
zfs_uio_get_dio_page_iov_iter() if the iov_iter type is not ITER_IOVEC
or ITER_UBUF. zfs_uio_get_dio_page_iov_iter() calls the
iov_iter_get_pages() calls that can handle any iov_iter type.
In the future it might be worth using the exposed iov_iter iterator
functions that are included in the header iov_iter.h since v6.7. These
functions allow for any iov_iter type to be iterated over and advanced
while applying a step function during iteration. This could possibly be
leveraged in zfs_uio_pin_user_pages().
A new ZFS test case was added to test that a ITER_BVEC is handled
correctly using this new code path. This test case was provided though
issue #16956.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16956Closes#17006
The flag VFCF_FILEREV was recently defined in FreeBSD
so that a file system could indicate that it increments
va_filerev by one for each change.
Since ZFS does do this, set the flag if defined for the
kernel being built. This allows the NFSv4.2 server to
reply with the correct change_attr_type attribute value.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closed#16976
Injecting a device probe failure is not possible by matching IO types,
because probe IO goes to the label regions, which is explicitly excluded
from injection. Even if it were possible, it would be awkward to do,
because a probe is sequence of reads and writes.
This commit adds a new IO "type" to match for injection, which looks for
the ZIO_FLAG_PROBE flag instead. Any probe IO will be match the
injection record and recieve the wanted error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
I'm about to add a new "type", and I need somewhere to put it!
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
To do a cross-build using only kbuild rather than a full source tree,
ARCH= needs to be passed for the kbuild Makefile to find the
archspecific Makefile.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16944
When building tests with zinject, it can be quite difficult to work out
if you're producing the right kind of IO to match the rules you've set
up.
So, here we extend injection records to count the number of times a
handler matched the operation, and how often an error was actually
injected (ie after frequency and other exclusions are applied).
Then, display those counts in the `zinject` output.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16938
