This yields substantial performance improvements when we only write out
some small % of entries at a time, as it will cause entries that will go
into "nearby" ZAP leaf nodes to be grouped closer together in the AVL, and
so touch fewer blocks. Without this, the distribution is an even spread,
so we touch a lot more ZAP leaf nodes for any given number of entries.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Both the API and the code were kinda mangled and I was really struggling
to follow it. The worst offender was the old ddt_stat_add(); after
fixing it up the rest of the changes are mostly knock-on effects and
targets of opportunity.
Note that the old ddt_stat_add() was safe against overflows - it could
produce crazy numbers, but the compiler wouldn't do anything stupid. The
assertions in ddt_stat_sub() go a lot of the way to protecting against
this; getting in a position where overflows are a problem is definitely
a programming error.
Also expanding ddt_stat_add() and ddt_histogram_empty() produces less
efficient assembly. I'm not bothered about this right now though; these
should not be hot functions, and if they are we'll optimise them later.
If we have to go back to the old form, we'll comment it like crazy.
Finally, I've removed the assertion that the bucket will never be
negative, as it will soon be possible to have entries with zero
refcounts: an entry for a block that is no longer on the pool, but is on
the log waiting to be synced out. It might be better to have a separate
bucket for these, since they're still using real space on disk, but
ultimately these stats are driving UI, and for now I've chosen to keep
them matching how they've looked in the past, as well as match the
operators mental model - pool usage is managed elsewhere.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Traditional dedup keeps a separate ddt_phys_t "type" for each possible
count of DVAs (that is, copies=) parameter. Each of these are tracked
independently of each other, and have their own set of DVAs. This leads
to an (admittedly rare) situation where you can create as many as six
copies of the data, by changing the copies= parameter between copying.
This is both a waste of storage on disk, but also a waste of space in
the stored DDT entries, since there never needs to be more than three
DVAs to handle all possible values of copies=.
This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the
first ddt_phys_t is used. Each time a block is written with the dedup
bit set, this single phys is checked to see if it has enough DVAs to
fulfill the request. If it does, the block is filled with the saved DVAs
as normal. If not, an adjusted write is issued to create as many extra
copies as are needed to fulfill the request, which are then saved into
the entry too.
Because a single phys is no longer an all-or-nothing, but can be
transitioning from fewer to more DVAs, the write path now has to keep a
copy of the previous "known good" DVA set so we can revert to it in case
an error occurs. zio_ddt_write() has been restructured and heavily
commented to make it much easier to see what's happening.
Backwards compatibility is maintained simply by allocating four
ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys
selection macros to check the flag. In the old arrangement, each number
of copies gets a whole phys, so it will always have either zero or all
necessary DVAs filled, with no in-between, so the old behaviour
naturally falls out of the new code.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
This slims down the in-memory entry to as small as it can be. The
IO-related parts are made into a separate entry, since they're
relatively rarely needed.
The variable allocation for dde_phys is to support the upcoming flat
format.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
The idea here is that sometimes you need the contents of an entry with
no intent to modify it, and/or from a place where its difficult to get
hold of its originating ddt_t to know how to interpret it.
A lightweight entry contains everything you might need to "read" an
entry - its key, type and phys contents - but none of the extras for
modifying it or using it in a larger context. It also has the full
complement of phys slots, so it can represent any kind of dedup entry
without having to know the specific configuration of the table it came
from.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
The "flat phys" feature will use only a single phys slot for all
entries, which means the old "single", "double" etc naming now makes no
sense, and more importantly, means that choosing the right slot for a
given block pointer will depend on how many slots are in use for a given
DDT.
This removes the old names, and adds accessor macros to decouple
specific phys array indexes from any particular meaning.
(These macros look strange in isolation, mainly in the way they take the
ddt_t* as an arg but don't use it. This is mostly a separate commit to
introduce the concept to the reader before the "flat phys" commit
extends it).
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
The upcoming dedup features break the long held assumption that all
blocks on disk with a 'D' dedup bit will always be present in the DDT,
or will have the same set of DVA allocations on disk as in the DDT.
If the DDT is no longer a complete picture of all the dedup blocks that
will be and should be on disk, then it does us no good to walk and prime
it up front, since it won't necessarily match up with every block we'll
see anyway.
Instead, we rework things here to be more like the BRT checks. When we
see a dedup'd block, we look it up in the DDT, consume a refcount, and
for the second-or-later instances, count them as duplicates.
The DDT and BRT are moved ahead of the space accounting. This will
become important for the "flat" feature, which may need to count a
modified version of the block.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15892
Very basic coverage to make sure things appear to work, have the right
format on disk, and pool upgrades and mixed table types work as
expected.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15892
This is the supporting infrastructure for the upcoming dedup features.
Traditionally, dedup objects live directly in the MOS root. While their
details vary (checksum, type and class), they are all the same "kind" of
thing - a store of dedup entries.
The new features are more varied than that, and are better thought of as
a set of related stores for the overall state of a dedup table.
This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will
cause new DDTs to be created as a ZAP in the MOS root, named
DDT-<checksum>. The is used as the root object for the normal type/class
store objects, but will also be a place for any storage required by new
features.
This commit adds two new fields to ddt_t, for version and flags. These
are intended to describe the structure and features of the overall dedup
table, and are stored as-is in the DDT root. In this commit, flags are
always zero, but the intent is that they can be used to hang optional
logic or state onto for new dedup features. Version is always 1.
For a "legacy" dedup table, where no DDT root directory exists, the
version will be 0.
ddt_configure() is expected to determine the version and flags features
currently in operation based on whether or not the fast_dedup feature is
enabled, and from what's available on disk. In this way, its possible to
support both old and new tables.
This also provides a migration path. A legacy setup can be upgraded to
FDT by creating the DDT root ZAP, moving the existing objects into it,
and setting version and flags appropriately. There's no support for that
here, but it would be straightforward to add later and allows the
possibility that newer features could be applied to existing dedup
tables.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15892
zvol queue limits initialization depends on `zv_volblocksize`, but it is
initialized later, leading to several limits being initialized with
incorrect values, including `max_discard_*` limits. This also causes
`blkdiscard` command to consistently fail, as `blk_ioctl_discard` reads
`bdev_max_discard_sectors()` limits as 0, leading to failure. The fix is
straightforward: initialize `zv->zv_volblocksize` early, before setting
the queue limits. This PR should fix `zvol/zvol_misc/zvol_misc_trim`
failure on recent PRs, as the test case issues `blkdiscard` for a zvol.
Additionally, `zvol_misc_trim` was recently enabled in `6c7d41a`,
which is why the issue wasn't identified earlier.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16454
If a zvol is renamed, and it has one or more snapshots, and
snapdev=visible is true for the zvol, then the rename causes a kernel
null pointer dereference error. This has the effect (on Linux, anyway)
of killing the z_zvol taskq kthread, with locks still held; which in
turn causes a variety of zvol-related operations afterward to hang
indefinitely (such as udev workers, among other things).
The problem occurs because of an oversight in #15486
(e36ff84c33). As documented in
dataset_kstats_create, some datasets may not actually have kstats
allocated for them; and at least at the present time, this is true for
snapshots. In practical terms, this means that for snapshots,
dk->dk_kstats will be NULL. The dataset_kstats_rename function
introduced in the patch above does not first check whether dk->dk_kstats
is NULL before proceeding, unlike e.g. the nearby
dataset_kstats_update_* functions.
In the very particular circumstance in which a zvol is renamed, AND that
zvol has one or more snapshots, AND that zvol also has snapdev=visible,
zvol_rename_minors_impl will loop over not just the zvol dataset itself,
but each of the zvol's snapshots as well, so that their device nodes
will be renamed as well. This results in dataset_kstats_create being
called for snapshots, where, as we've established, dk->dk_kstats is
NULL.
Fix this by simply adding a NULL check before doing anything in
dataset_kstats_rename.
This still allows the dataset_name kstat value for the zvol to be
updated (as was the intent of the original patch), and merely blocks
attempts by the code to act upon the zvol's non-kstat-having snapshots.
If at some future time, kstats are added for snapshots, then things
should work as intended in that case as well.
Signed-off-by: Justin Gottula <justin@jgottula.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Alan Somers <asomers@gmail.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
zvol_alloc_non_blk_mq()->blk_queue_set_write_cache() needs the disk
queue setup to prevent a NULL pointer deference.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16453
The 6.10 kernel broke our rpm-kmod builds. The 6.10 kernel really
wants the source files in the same directory as the object files.
This workaround makes rpm-kmod work again. It also updates
the builtin kernel codepath to work correctly with 6.10.
See kernel commits:
b1992c3772e6 kbuild: use $(src) instead of $(srctree)/$(src) for source
directory
9a0ebe5011f4 kbuild: use $(obj)/ instead of $(src)/ for common pattern
rules
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16439Closes#16450
Report the correct error message in libzfs when attaching/replacing a
vdev with a higher ashift.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16449
zpool upgraded with 'feature@project_quota' needs re-layout of SA's
to fix the SA_ZPL_PROJID at SA_PROJID_OFFSET (128). Its necessary for
the correct accounting of object usage against its projid.
Old object (created before upgrade) when gets a projid assigned, its
SA gets re-layout via sa_add_projid(). If object has xattr dir, SA
of xattr dir also gets re-layout. But SA re-layout of xattr objects
inside a xattr dir is not done.
Fix zfs_setattr_dir() to re-layout SA's on xattr objects, when setting
projid on old xattr object (created before upgrade).
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#16355Closes#16356
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#16431
Use /dev/urandom so we never have to wait on entropy.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16442
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
Since the change to folios it has just been a wrapper anyway. Linux has
removed their wrapper, so we add one.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
These fields are very old, so no detection necessary; we just move them
into the limit setup functions.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
Apply them with with the rest of the settings.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
Detect it, and use a macro to make sure we always match the prototype.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
It's no longer available directly on the request queue, but its easy to
get from the attached disk.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
In 6.11 struct queue_limits gains a 'features' field, where, among other
things, flush and write-cache are enabled. Detect it and use it.
Along the way, the blk_queue_set_write_cache() compat wrapper gets a
little cleanup. Since both flags are alway set together, its now a
single bool. Also the very very ancient version that sets q->flush_flags
directly couldn't actually turn it off, so I've fixed that. Not that we
use it, but still.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
It gets hairier again in Linux 6.11, so I want some actual theory of
operation laid out for next time.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16432
-shared was hardcoded, so when building with --disable-shared it amounts
to trying to do shared linkage against static libs, which naturally
fails.
The fix is straightforward; just don't hardcode it. libtool will work
out what to do.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16427
This applies the same change in #9115 to FreeBSD. This was actually the
old behavior in FreeBSD 12; it only regressed when FreeBSD support was
added to OpenZFS. As far as I can tell, the timeline went like this:
* Illumos's zfsvfs_teardown used an unconditional txg_wait_synced
* Illumos added the dirty data check [^4]
* FreeBSD merged in Illumos's conditional check [^3]
* OpenZFS forked from Illumos
* OpenZFS removed the dirty data check in #7795 [^5]
* @mattmacy forked the OpenZFS repo and began to add FreeBSD support
* OpenZFS PR #9115[^1] recreated the same dirty data check that Illumos
used, in slightly different form. At this point the OpenZFS repo did
not yet have multi-OS support.
* Matt Macy merged in FreeBSD support in #8987[^2] , but it was based on
slightly outdated OpenZFS code.
In my local testing, this vastly improves the reboot speed of a server
with a large pool that has 1000 datasets and is resilvering an HDD.
[^1]: https://github.com/openzfs/zfs/pull/9115
[^2]: https://github.com/openzfs/zfs/pull/8987
[^3]: 10b9d77bf1
[^4]: 5aaeed5c61
[^5]: https://github.com/openzfs/zfs/pull/7795
Sponsored by: Axcient
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#16268
When building a static build (--disable-shared), zstream fails to link
because of the duplicate highbit64() in libzpool/kernel.c. Since they're
identical, and the libzpool one is visible to zstream, we remove
zstream's copy and just use the common one.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16426
It's now the caller's responsibility do special handling for holes if
that's something it wants.
This also makes zio_compress_data() and zio_decompress_data() properly
the inverse of each other.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Jason Lee <jasonlee@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16326
Commit 46ebd0a updated the build system to make symbolic link for zpool.
However, this commit did not update the automake file to also add the
symbolic link to the CLEANFILES variable. This is necessary so the link
is removed when running make clean/distclean.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16422
ln will fail if the target already exists, which causes make to bail
out. Adding -f makes it more "compiler-like", overwriting the target
instead.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16423
Previous code evicted nr_to_scan items from each NUMA node. This
not only multiplied the eviction by the number of nodes, but could
exhaust the smaller ones, evicting inodes used by acive workload
and requiring their immediate recreation. This patch spreads the
requested eviction between all NUMA nodes proportionally to their
evictable counts, which should be closer to expected LRU logic.
See kernel's super_cache_scan() as a similar logic example.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16397
Previous code pruned 10% of dnodes once 3/4 of metadata appeared
unevictable. On workloads with many millions of dnodes and little
other metadata it creates significant load spikes for many seconds
straight. This change instead gradually increases pruning as
unevictable metadata grow above the 3/4, which may allow it to
stabilize at some level.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16401
- Skip config lock enter/exit for embedded blocks. They have no
DVAs, so there is nothing to check under the lock.
- Skip CHECKSUM check and properly check PSIZE for embedded blocks.
- Add static branch predictions for unlikely conditions.
- Do not verify DVAs for blocks already in ARC. ARC hit already
"verified" the first (often the only) DVA, and it does not worth to
enter/exit config lock for nothing.
Some profiles show me up to 3% of CPU saving from this change.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16387
So far, the values of ZFS_MAXPROPLEN and ZPOOL_MAXPROPLEN were equal to
MAXPATHLEN, which is 1024 on FreeBSD and 4096 on Linux. This wasn't
ideal. Some of the surprising outcomes of this implementation are:
1. When creating a pool user property with zpool-set(8), libzfs makes
sure that the length of the property's value is less than
ZFS_MAXPROPLEN. However, the ZFS kernel module does not do that.
Instead, it checks the length against ZAP_MAXVALUELEN. As a result,
it is possible to create a property the length of which is going to
be larger than zpool(8) is ready to read.
2. A pool user property created on Linux is too big to be read on
FreeBSD.
This change sets both ZFS_MAXPROPLEN and ZPOOL_MAXPROPLEN to
ZAP_MAXVALUELEN, which is 8192 at the moment.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16248
The documentation mentioned that the property name can be 256 characters
long. This was incorrect. The last byte is reserved for NUL, so the
name provided by the operator can be only 255 characters long.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16248
Spare and l2cache vdev labels are not updated during import. Therefore,
if disk paths are updated between pool export and import, the AUX label
still shows the old paths. This patch syncs the AUX label
during import to show the correct path information.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15817
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
ZFS implements copy_file_range(2) using block cloning when possible.
This implementation must respect the RLIMIT_FSIZE limit.
zfs_clone_range() already checks the limit, so it is safe to remove this
check in zfs_freebsd_copy_file_range(). Moreover, the removed check
produces false positives: the length passed to copy_file_range(2) may be
larger than the input file size; as the man page notes, "for best
performance, call copy_file_range() with the largest len value
possible." In particular, some existing code passes SSIZE_MAX there.
The check in zfs_clone_range() clamps the length to the input file's
size before checking, but the removed check uses the caller supplied
length, so something like
$ echo a > /tmp/foo
$ limits -f 1024 cat /tmp/foo > /tmp/bar
fails because FreeBSD's cat(1) uses copy_file_range(2) in the manner
described above.
Reported-by: Philip Paeps <philip@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When importing multiple pools, the nvlist of properties given with "-o"
is shared amongst the several threads. So no thread should modify it.
Previously, in the course of validating the cachefile property, the
zpool_valid_proplist function would temporarily modify the value, and
then change it back. Now it will operate on a clone of the value.
Sponsored by: Axcient
Fixes#16405
Signed-off-by: Alan Somers <asomers@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Some libc's like uClibc lag the proper definition of SEEK_DATA
and SEEK_HOLE. Since we have only two files in ZTS which use
these definitons, let's define them by hand:
```
#ifndef SEEK_DATA
#define SEEK_DATA 3
#endif
#ifndef SEEK_HOLE
#define SEEK_HOLE 4
#endif
```
There should be no failures, because:
- FreeBSD has support for SEEK_DATA/SEEK_HOLE since FreeBSD 8
- Linux has it since Linux 3.1
- the libc will submit the parameters unchanged to the kernel
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: Klara, Inc.
Signed-off-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Simplify the test, by using the variable "$PLATFORM_ID" in favor
of "$REDHAT_SUPPORT_PRODUCT_VERSION".
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
This fixes things so mirrored special vdevs report themselves as
"class=special" rather than "class=normal".
This happens due to the way the vdev nvlists are constructed:
mirrored special devices - The 'mirror' vdev has allocation bias as
"special" and it's leaf vdevs are "normal"
single or RAID0 special devices - Leaf vdevs have allocation bias as
"special".
This commit adds in code to check if a leaf's parent is a "special"
vdev to see if it should also report "special".
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16217
Run basic JSON validation tests on the new `zfs|zpool -j` output.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16217
This commit adds support for zpool status command to displpay status
of ZFS pools in JSON format using '-j' option. Status information is
collected in nvlist which is later dumped on stdout in JSON format.
Existing options for zpool status work with '-j' flag. man page for
zpool status is updated accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16217
