Fix dmu_object_next() to correctly handle unallocated objects on
large_dnode datasets.
We implement this by scanning the dnode block until we find the correct
offset to be used in dnode_next_offset(). This is necessary because we
can't assume *objectp is a hole even if dmu_object_info() returns
ENOENT.
This fixes a couple of issues with zfs receive on large_dnode datasets.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5027Closes#5532
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7181
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90f2c09Closes#5585
Assuming /bin/cp causes problems on systems where cp is
not in /bin such as NixOS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Closes#5548
Add *_by_dnode() routines for accessing objects given their
dnode_t *, this is more efficient than accessing the object by
(objset_t *, uint64_t object). This change converts some but
not all of the existing consumers. As performance-sensitive
code paths are discovered they should be converted to use
these routines.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Closes#5534
Issue #4802
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Joe Stein <jas14@cs.brown.edu>
Ported-by: Don Brady <don.brady@intel.com>
When loading a pool that had been created before the existance of
per-vdev zaps, on a system that knows about per-vdev zaps, the
per-vdev zaps will not be allocated and initialized.
This appears to be because the logic that would have done so, in
spa_sync_config_object(), is not reached under normal operation. It is
only reached if spa_config_dirty_list is non-empty.
The fix is to add another `AVZ_ACTION_` enum that will allow this code
to be reached when we detect that we're loading an old pool, even when
there are no dirty configs.
OpenZFS-issue: https://www.illumos.org/issues/7743
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/e2d29d0Closes#5582
This change introduces a new weighting algorithm to improve
metaslab selection. The new weighting algorithm relies on the
SPACEMAP_HISTOGRAM feature. As a result, the metaslab weight
now encodes the type of weighting algorithm used (size-based
vs segment-based).
Porting Notes: The metaslab allocation tracing code is conditionally
removed on linux (dependent on mdb debugger).
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov pavel.zakharov@delphix.com
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Don Brady <don.brady@intel.com>
OpenZFS-issue: https://www.illumos.org/issues/7303
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d5190931bdCloses#5404
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5547Closes#5543
[bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API"
autotools checks to use an int to determine whether the various REQ_OP
values are defined. This should work properly on kernels >= 4.8.
[bio] bio_set_op_attrs() is now an inline function and can't be detected
with #ifdef. Add a configure check to determine whether bio_set_op_attrs()
is defined. Move the local definition of it from vdev_disk.c to
blkdev_compat.h for consistency with other related compability shims.
[bio] The read/write flags and their modifiers, including WRITE_FLUSH,
WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new
bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA
and set the flags appropriately for each supported kernel version.
[vfs] The generic_readlink() function has been made static. If .readlink
in inode_operations is NULL, generic_readlink() is used.
[zol typo] Completely unrelated to 4.10 compat, fix a typo in the check
for REQ_OP_SECURE_ERASE so that the proper macro is defined:
s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5499
Fix a regression accidentally introduced by e0ab3ab.
Additionally, add a new script zpool_import_014_pos.ksh to
the ZFS test suite to exercise 'zpool import -t' functionality.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5466Closes#5515
The introduction of parallel zvol prefetch causes deadlock when using
vdev_file.
spa_async->(spa_namespace_lock)->txg_wait_synced->(wait for txg_sync)
txg_sync->zio_wait->(wait for vdev_file_io_fsync on system_taskq)
zvol_prefetch_minors_impl (on system_taskq)->spa_open_common->(wait for spa_namespace_lock)
We fix this by using dedicated taskq for vdev_file. This same change
was originally made in commit bc25c93 but reverted in commit aa9af22
when dynamic taskqs were added.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#5506Closes#5495
When iterating over the input nvlist in dsl_props_set_sync_impl() when we don't
preserve the nvpair name before looking up ZPROP_VALUE, so when we later go to
process it nvpair_name() is always "value" and not the actual property name.
This fixes a couple of bugs in zfs_ioc_recv():
* Received properties were not restored correctly when failing to receive an
incremental send stream
* Received properties were not completely replaced by the new ones when
successfully receiving an incremental send stream
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5497
This branch contains the following fixes/improvements.
* Fix setting i_flags
* Fix wrong operator in xvattr.h
* Fix fchange macro in zpl_ioctl_setflags()
* Added configure check to use inode_set_flags()
* Added a test case for chattr for better test coverage
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5486Closes#5470Closes#5469
zfs_sb_create would normally takes ownership of zmo, and it will be freed in
zfs_sb_free. However, when zfs_sb_create fails we need to explicit free it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5490Closes#5496
The fchange in zpl_ioctl_setflags was for detecting flag change. However it
was incorrect and would always fail to detect a flag change from set to unset,
causing users without CAP_LINUX_IMMUTABLE to be able to unset flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Adapt avx512bw implementation for use with abd buffers. Mul2 implementation
is rewritten to take advantage of the BW instruction set.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Romain Dolbeau <romain.dolbeau@atos.net>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5477
Fix zfs_xvattr_set to set S_IMMUTABLE and S_APPEND flags correctly.
Reinstate zfs_set_inode_flags and use it when zfs_xvatter_set and also when
setting up inode in zfs_znode_alloc and zfs_rezget.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
User of ida needs to call ida_destroy after using it. Otherwise
ida->free_bitmap and/or other stuff may leak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5484
This removes two large whitespaces in "modinfo zfs" as well as correcting
a couple typos.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes#5475
Enable picky cstyle checks and resolve the new warnings. The vast
majority of the changes needed were to handle minor issues with
whitespace formatting. This patch contains no functional changes.
Non-whitespace changes are as follows:
* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5465
Don't count '@' for dataset namelen if not a snapshot. This
fixes making a pool unimportable when the dataset namelen
is 255.
Add test file for zfs create name length 255.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5432Closes#5456
CID 154617: Memory - illegal accesses (UNINIT)
The value here just needs to be initialized to make Coverity happy.
When dsize == 0, then value of daiter.iter_mapaddr is irrelevant. That
address won't be accessed, it's only used for some arithmetic. dsize
can be zero either if dabd is null, or if code column is longer than the
current data column.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5437
Speed up import and export speed by:
* Add system delay taskq
* Parallel prefetch zvol dnodes during zvol_create_minors
* Parallel zvol_free during zvol_remove_minors
* Reduce list linear search using ida and hash
Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5433
Enable zio_dva_throttle_enabled=1 by default. Subsequent
testing has been unable to reproduce the suspected regression.
Tested-by: kernelOfTruth kerneloftruth@gmail.com
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf behlendorf1@llnl.gov
Reverts #5335Closes#5289Closes#5457
Save and reuse ddt dspace calculation when there have been no ddt changes.
This avoids unnecessary traversal of 168KiB of ddt histograms.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5425
It was observed that even when the txg history is disabled by
setting `zfs_txg_history=0` the txg_sync thread still fetches
the vdev stats unnecessarily.
This patch refactors the code such that vdev_get_stats() is no
longer called when `zfs_txg_history=0`. And it further reduces
the differences between upstream and the ZoL txg_sync_thread()
function.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5412
On some kernel version, blk_cleanup_queue and put_disk will wait for more then
10ms. So a pool with a lot of zvols will easily wait for more then 1 min if we
do zvol_free sequentially.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Requires-spl: refs/pull/588/head
Do parallel prefetch all zvol dnodes before actually creating each individual.
This will greatly reduce the import time when having a lot of zvols and disk
is slow.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
dbuf_read() creates a zio_root() to track and wait for all the
zio's that may happen as part of this call. However, if the blkptr_t
for this buffer is NULL or a hole, we will not create any more zio's,
so this zio_root() is unnecessary. This is always the case when calling
dbuf_read() on a bonus buffer, because it has no blkptr (it's part of
the containing dnode). For workloads that read a lot of bonus buffers
(e.g. file creation and removal), creating and destroying these
unnecessary zio's can decrease performance by around 3%.
The fix is to only create/destroy the zio_root() in dbuf_read() if
the blkptr is not NULL and not a hole.
Changes sponsored by Intel Corp.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue openzfs/openzfs#137
Closes#4803Closes#5382
This should be & and not | so is_metadata is set correctly.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5438
It looks like this was functionality which was added in the
original SA implementation and then never needed. It can
be safely removed now and easily added back if we find a
use for it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5440
zio.h includes zio_impl.h but zio_impl.h also includes zio.h, so the
header files to contain each other. Get rid of the zio_impl.h include
in zio.h and update zio_inject.c to include zio.h instead of zio_impl.h.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5439
Use it for spa_deadman, zpl_posix_acl_free, snapentry_expire.
This free system_taskq from the above long delay tasks, and allow us to do
taskq_wait_outstanding on system_taskq without being blocked forever, making
system_taskq more generic and useful.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
In multiple cases zio_buf_alloc() was used instead of kmem_alloc()
or vmem_alloc(). This was often done because the allocations
could be large and it was easy to use zfs_buf_alloc() for them.
But this isn't ideal for allocations which are small or short
lived. In these cases it is better to use kmem_alloc() or
vmem_alloc(). If possible we want to avoid the case where
we have slabs allocated for kmem caches which are rarely used.
Note for small allocations vmem_alloc() will be internally
converted to kmem_alloc(). Therefore as long as large
allocations are infrequent and short lived the penalty for
using vmem_alloc() is small.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5409
* Convert ABD to use the Linux Kernel scatterlist implementation
instead of the hand rolled one from illumos.
* Scatter ABDs are preferentially populated with higher order
compound pages from a single zone. Allocation size is
progressively decreased until it can be satisfied without
performing reclaim or compaction.
* An alternate page allocator is provided for kernels older
than 3.6 and for CONFIG_HIGHMEM systems. This allocator
is designed as a fallback for maximum compatibility.
* Extended abdstats to provide visibility in the the allocator.
* Add cached value for PAGESIZE in userspace.
Contributions-by:
Chunwei Chen <david.chen@osnexus.com>
Gvozden Neskovic <neskovic@gmail.com>
Jinshan Xiong <jinshan.xiong@intel.com>
Isaac Huang <he.huang@intel.com>
David Quigley <david.quigley@intel.com>
Brian Behlendorf <behlendorf1@llnl.gov>
Enable vectorized raidz code on ABD buffers. The avx512f,
avx512bw, neon and aarch64_neonx2 are disabled in this commit.
With the exception of avx512bw these implementations are
updated for ABD in the subsequent commits.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
* userspace: aligned buffers. Minimum of 32B alignment is
needed for AVX2. Kernel buffers are aligned 512B or more.
* add abd_get_offset_size() interface
* abd_iter_map(): fix calculation of iter_mapsize
* add abd_raidz_gen_iterate() and abd_raidz_rec_iterate()
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Linux kernel commit 723c038475b78 removed this field.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#5393
CID 147540: unsigned_compare
- Cast nsec to a int32_t to properly detect the expected overflow.
CID 147542: unsigned_compare
- intval can never be less than ZIO_FAILURE_MODE_WAIT which is
defined to be zero. Remove this useless check.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5379
It's used by Lustre to determine if the objset can be upgraded.
The inline version doesn't work because dmu_objset_is_snapshot()
is not exported.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Closes#5385
Linux 3.14 introduces inode->set_acl(). Normally, acl modification will come
from setxattr, which will handle by the acl xattr_handler, and we already
handles that well. However, nfsd will directly calls inode->set_acl or
return error if it doesn't exists.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Massimo Maggi <me@massimo-maggi.eu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5371Closes#5375
The phase 2 work primarily entails the Diagnosis Engine and
the Retire Agent modules. It also includes infrastructure
to support a crude FMD environment to host these modules.
The Diagnosis Engine consumes I/O and checksum ereports and
feeds them into a SERD engine which will generate a corres-
ponding fault diagnosis when the SERD engine fires. All the
diagnosis state data is collected into cases, one case per
vdev being tracked.
The Retire Agent responds to diagnosed faults by isolating
the faulty VDEV. It will notify the ZFS kernel module of
the new VDEV state (degraded or faulted). This agent is
also responsible for managing hot spares across pools.
When it encounters a device fault or a device removal it
replaces the device with an appropriate spare if available.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#5343
Currently every calls to zpl_posix_acl_release will schedule a delayed task,
and each delayed task will add a timer. This used to be fine except for
possibly bad performance impact.
However, in Linux 4.8, a new timer wheel implementation[1] is introduced. In
this new implementation, the larger the delay, the less accuracy the timer is.
So when we have a flood of timer from zpl_posix_acl_release, they will expire
at the same time. Couple with the fact that task_expire will do linear search
with lock held. This causes an extreme amount of contention inside interrupt
and would actually lockup the system.
We fix this by doing batch free to prevent a flood of delayed task. Every call
to zpl_posix_acl_release will put the posix_acl to be freed on a lockless
list. Every batch window, 1 sec, the zpl_posix_acl_free will fire up and free
every posix_acl that passed the grace period on the list. This way, we only
have one delayed task every second.
[1] https://lwn.net/Articles/646950/
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Only restrict the maximum zio alloc size to 32-bit kernel space.
The same virtual address space limitations don't apply to user
space. This resolves a memory allocation failure in raidz_test
where it expects to be able to exercises all valid zio sizes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This is the Fletcher4 algorithm implemented in pure C, but using
multiple counters using algorithms identical to those used for
SSE/NEON and AVX2.
This allows for faster execution on core with strong superscalar
capabilities but weak SIMD capabilities.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#5317
Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on
supported filesystem. It's basically doing open(2) and unlink(2) atomically.
The filesystem support is added through i_op->tmpfile. We basically copy the
create operation except we get rid of the link and name related stuff and add
the new node to unlinked set.
We also add support for linkat(2) to link tmpfile. However, since all previous
file operation will skip ZIL, we force a txg_wait_synced to make sure we are
sync safe.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Currently, doing things like fsetxattr(2) on an unlinked file will result in
ENODATA. There's two places that cause this: zfs_dirent_lock and zfs_zget.
The fix in zfs_dirent_lock is pretty straightforward. In zfs_zget though, we
need it to not return error when the zp is unlinked. This is a pretty big
change in behavior, but skimming through all the callers, I don't think this
change would cause any problem. Also there's nothing preventing z_unlinked
from being set after the z_lock mutex is dropped before but before zfs_zget
returns anyway.
The rest of the stuff is to make sure we don't log xattr stuff when owner is
unlinked.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
avx512f should work on all AVX512 hardware, since it only uses
Foundation instructions.
avx512bw should be faster on hardware supporting the AVW512BW
extension. We can use full-width pshufb (instead of relying on the 256
bits AVX2 pshufb). As a side-effect, the code is also unrolled more.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.github@dolbeau.name>
Closes#5219
On error dsl_prop_get_all_ds() does not free the nvlist it allocates.
This behavior may have been intentional when originally written
but is atypical and often confusing. Since no callers rely on this
behavior the function has been updated to always free the nvlist
on error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: BearBabyLiu <liu.huang@zte.com.cn>
Closes#5320
On 32-bit Linux systems use vmem_size() to correctly size the ARC
and better determine when IO should be throttle due to low memory.
On 64-bit systems this change has no effect since the virtual
address space available far exceeds the physical memory available.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5347
A limit of 1TB exists for zvols on 32-bit systems. Update the code
to correctly reflect this limitation in a similar manor as the
OpenZFS implementation.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5347
Originally the .zfs/snapshot directory was disabled for 32-bit systems
because 64-bit inode numbers were not supported. This is no longer
the case and this functionality can be enabled by default.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5347Closes#2002
Add the TASKQID_INVALID macros and update callers to use the macro
instead of testing against 0. There is no functional change
even though the functions in zfs_ctldir.c incorrectly used -1
instead of 0.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5347
Replace magic value 16 with ARRAY_SIZE() to correctly handle
when the sa_legacy_attrs array size changes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5354
CID 147509: Explicit null dereferenced
- l2arc_sublist_lock is fragile as relied on caller too much.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5319
Ubuntu added support for checking inode permissions to lookup_bdev() in kernel
commit 193fb6a2c94fab8eb8ce70a5da4d21c7d4023bee (merged in 4.4.0-6.21).
Upstream bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1636517
This patch adds a test for Ubuntu's variant of lookup_bdev() to configure and
calls the function in the correct way.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Hajo Möller <dasjoe@gmail.com>
Closes#5336
Until it can be determined definitively that a performance
regression wasn't introduced accidentally by 3dfb57a this
functionality is being disabled by default. It can be re-
enabled by setting zio_dva_throttle_enabled=1.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5335
Issue #5289
- Fix autoreplace behaviour on statechange-led.sh script.
ZED sends the following events on an auto-replace:
1. statechange: Disk goes UNAVAIL->ONLINE
2. statechange: Disk goes ONLINE->UNAVAIL
3. vdev_attach: Disk goes ONLINE
Events 1-2 happen when ZED first attempts to do an auto-online. When that
fails, ZED then tries an auto-replace, generating the vdev_attach event in #3.
In the previous code, statechange-led was only looking at the UNAVAIL->ONLINE
transition to turn off the LED. It ignored the #2 ONLINE->UNAVAIL transition,
assuming it was just the "old" VDEV going offline. This is problematic, as
a drive can go from ONLINE->UNAVAIL when it's malfunctioning, and we don't want
to ignore that.
This new patch correctly turns on the fault LED every time a drive becomes
UNAVAIL. It also monitors vdev_attach events to trigger turning off the LED
when an auto-replaced disk comes online.
- Remove unnecessary libdevmapper warning with --with-config=kernel
This fixes an unnecessary libdevmapper warning when building
--with-config=kernel. Kernel code does not use libdevmapper, so the warning
is not needed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#2375Closes#5312Closes#5331
Similar to commit a3600a106. Asm files need an explicit note
that they do not require an executable stack.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason Zaman <jason@perfinion.com>
Closes#5332
This is caught by kmemleak when running compress_004_pos
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5244Closes#5330
When creating and destroying pools in tight loop it's possible to
exhaust the number of allowed threads on a system. This results
in taskq_create() failling and a NULL dereference.
Resolve the issue by falling back to opening the vdevs all
synchronously.
Reviewed-by: Denys Rtveliashvili <denys@rtveliashvili.name>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/spl#521
Closes#4637
Previously when a drive faulted, the statechange-led.sh script would lookup
the drive's LED sysfs entry in /sys/block/sd*/device/enclosure_device, and
turn it on. During testing we noticed that if you pulled out a drive, or if
the drive was so badly broken that it no longer appeared to Linux, that the
/sys/block/sd* path would be removed, and the script could not lookup the
LED entry.
To fix this, this patch looks up the disks's more persistent
"/sys/class/enclosure/X:X:X:X/Slot N" LED sysfs path at pool import. It then
passes that path to the statechange-led script to use, rather than having the
script look it up on the fly. This allows the script to turn on/off the slot
LEDs even when the drive is missing.
Closes#5309Closes#2375
This is not useful on micro-architecture with a weak NEON
implementation (only 64 bits); the native version is slower &
the byteswap barely faster than scalar. On A53 or A57, it's
a small improvement on scalar but OK for byteswap.
Results from an A53 system:
0 0 0x01 -1 0 1499068294333000 1499101101878000
implementation native byteswap
scalar 1008227510 755880264
aarch64_neon 1198098720 1044818671
fastest aarch64_neon aarch64_neon
Results from a A57 system:
0 0 0x01 -1 0 4407214734807033 4407233933777404
implementation native byteswap
scalar 2302071241 1124873346
aarch64_neon 2542214946 2245570352
fastest aarch64_neon aarch64_neon
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#5248
The AVL tree compare function requires that either -1, 0, or 1 be
returned. However the strcmp() function only guarantees that a
negative, zero, or positive value is returned. Therefore, the
return value of strcmp() needs to be sanitized with AVL_ISIGN.
This was initially overlooked because the x86_64 implementation
of strcmp() happens to only returns the allowed values. This
was observed on an aarch64 platform which behaves correctly but
differently as described above.
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5311Closes#5313
In torvalds/linux@31051c8 the inode_change_ok() function was
renamed setattr_prepare() and updated to take a dentry ratheri
than an inode. Update the code to call the setattr_prepare()
and add a wrapper function which call inode_change_ok() for
older kernels.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Requires-spl: refs/pull/581/head
In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and
generic_{set,get,remove}xattr are removed. xattr operations will directly
go through sb->s_xattr.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are
merged together into iops->rename(), it now wants flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
These operations are dir specific, there's no point putting them in
zpl_inode_operations which is for regular files.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
1. Enable multipath autoreplace support for FMA.
This extends FMA autoreplace to work with multipath disks. This
requires libdevmapper to be installed at build time.
2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online
Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure
LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must
be supported by the Linux SES driver for this to work. The enclosure LED
scripts work for multipath devices as well. The scripts will clear the LED
when the fault is cleared.
3. Rate limit ZIO delay and checksum events so as not to flood ZED
ZIO delay and checksum events are rate limited to 5/sec in the zfs module.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#2449Closes#3017Closes#5159
CID 150926: Unchecked return value (CHECKED_RETURN)
- This case cannot occur given the existing taskq implementation
and flags passed to task_dispatch().
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5272
Accidentally introduced by 3dfb57a, when building with debugging
disabled several variables are unused. Resolve this by wrapping
them in ASSERTV to remove them for non-debug builds.
Reviewed by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5284
CID 150924: Unchecked return value (CHECKED_RETURN)
- On taskq_dispatch failure the reference must be dropped and
this entry can be safely skipped. This case should be impossible
in the existing implementation but should be handled regardless.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5278
OpenZFS 7090 - zfs should throttle allocations
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Ported-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
When write I/Os are issued, they are issued in block order but the ZIO
pipeline will drive them asynchronously through the allocation stage
which can result in blocks being allocated out-of-order. It would be
nice to preserve as much of the logical order as possible.
In addition, the allocations are equally scattered across all top-level
VDEVs but not all top-level VDEVs are created equally. The pipeline
should be able to detect devices that are more capable of handling
allocations and should allocate more blocks to those devices. This
allows for dynamic allocation distribution when devices are imbalanced
as fuller devices will tend to be slower than empty devices.
The change includes a new pool-wide allocation queue which would
throttle and order allocations in the ZIO pipeline. The queue would be
ordered by issued time and offset and would provide an initial amount of
allocation of work to each top-level vdev. The allocation logic utilizes
a reservation system to reserve allocations that will be performed by
the allocator. Once an allocation is successfully completed it's
scheduled on a given top-level vdev. Each top-level vdev maintains a
maximum number of allocations that it can handle (mg_alloc_queue_depth).
The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth)
are distributed across the top-level vdevs metaslab groups and round
robin across all eligible metaslab groups to distribute the work. As
top-levels complete their work, they receive additional work from the
pool-wide allocation queue until the allocation queue is emptied.
OpenZFS-issue: https://www.illumos.org/issues/7090
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7Closes#5258
Porting Notes:
- Maintained minimal stack in zio_done
- Preserve linux-specific io sizes in zio_write_compress
- Added module params and documentation
- Updated to use optimize AVL cmp macros
The ICP requires destructors to for each crypto module that is added.
These do not necessarily exist in Illumos because they assume that
these modules can never be unloaded from the kernel. Some of this
cleanup code was missed when #4760 was merged, resulting in leaks.
This patch simply fixes that.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #4760Closes#5265
Fix use after free in zfsctl_snapshot_unmount(). Use /usr/bin/env
instead of /bin/sh to fix a shell code injection flaw and allow use
with grsecurity.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Stian Ellingsen <stian@plaimi.net>
Closes#5250Closes#4377
This is as much an upstream compatibility as it's a bit of a performance
gain.
The illumos taskq implemention doesn't allow a TASKQ_THREADS_CPU_PCT type
to be dynamic and in fact enforces as much with an ASSERT.
As to performance, if this taskq is dynamic, it can cause excessive
contention on tq_lock as the threads are created and destroyed because it
can see bursts of many thousands of tasks in a short time, particularly
in heavy high-concurrency zvol write workloads.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5236
When #4760 was merged tests were added to ensure that the new checksums
were working properly. However, some of the functionality for sha2
functions were not ported over, resulting in some Coverity defects and
code that would be unstable when needed in the future. This patch
simply ports over the missing code and fixes the defects in the
process.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #4760Closes#5251
The following new test cases need to have execute permissions set:
userquota/groupspace_003_pos.ksh
userquota/userquota_013_pos.ksh
userquota/userspace_003_pos.ksh
upgrade/upgrade_userobj_001_pos.ksh
upgrade/setup.ksh
upgrade/cleanup.ksh
The following source files accidentally were marked executable:
lib/libzpool/kernel.c
lib/libshare/nfs.c
lib/libzfs/libzfs_dataset.c
lib/libzfs/libzfs_util.c
tests/zfs-tests/cmd/rm_lnkcnt_zero_file/rm_lnkcnt_zero_file.c
tests/zfs-tests/cmd/dir_rd_update/dir_rd_update.c
cmd/zed/zed_exec.c
module/icp/core/kcf_sched.c
module/zfs/dsl_pool.c
module/zfs/arc.c
module/nvpair/nvpair.c
man/man5/zfs-module-parameters.5
Reviewed-by: GeLiXin <ge.lixin@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5241
Call mount and umount via /usr/bin/env instead of /bin/sh in
zfsctl_snapshot_mount() and zfsctl_snapshot_unmount().
This change fixes a shell code injection flaw. The call to /bin/sh
passed the mountpoint unescaped, only surrounded by single quotes. A
mountpoint containing one or more single quotes would cause the command
to fail or potentially execute arbitrary shell code.
This change also provides compatibility with grsecurity patches.
Grsecurity only allows call_usermodehelper() to use helper binaries in
certain paths. /usr/bin/* is allowed, /bin/* is not.
OpenZFS decided that ignore_hole_birth was too imprecise and
incorrect a name (and went with send_holes_without_birth_time).
Rename it in ZoL too, while keeping the name "ignore_hole_birth"
pointing to the same variable for existing consumers.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#5239
Updating vd->vdev_parent->vdev_nonrot in vdev_open_child()
is a race when vdev_open_child is called for many children
from a task queue.
vdev_open_child() is only called by vdev_open_children(), let
the latter update the parent vdev_nonrot member. The update
was already there, so done twice previously. Thus using the
same logic at the end in vdev_open_children() to update
vdev_nonrot, either we are vdev_uses_zvols() or not.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5162
Fixes ABI issues with fletcher4 code, adds support for
incremental updates, and adds ztest method for testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5164
Using a benchmark which creates 2 million files in one TXG, I observe
that the thread running spa_sync() is on CPU almost the entire time we
are syncing, and therefore can be a performance bottleneck. About 50% of
the time in spa_sync() is in dmu_objset_do_userquota_updates().
The problem is that dmu_objset_do_userquota_updates() calls
zap_increment_int(DMU_USERUSED_OBJECT) once for every file that was
modified (or created). In this benchmark, all the files are owned by the
same user/group, so all 2 million calls to zap_increment_int() are
modifying the same entry in the zap. The same issue exists for the
DMU_GROUPUSED_OBJECT.
We should keep an in-memory map from user to space delta while we are
syncing, and when we finish, iterate over the in-memory map and modify
the ZAP once per entry. This reduces the number of calls to
zap_increment_int() from "number of objects modified" to "number of
owners/groups of modified files".
This reduced the time spent in spa_sync() in the file create benchmark
by ~33%, from 11 seconds to 7 seconds.
Upstream bugs: DLPX-44799
Ported by: Ned Bass <bass6@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6988
ZFSonLinux-issue: https://github.com/zfsonlinux/zfs/issues/4642
OpenZFS-commit: unmerged
Porting notes:
- Added curly braces around declaration of userquota_cache_t cache to
quiet compiler warning;
- Handled the userobj accounting the same way it proposed in this path.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
This patch tracks dnode usage for each user/group in the
DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode
accounting have the key prefixed with "obj-" followed by the UID/GID
in string format (as done for the block accounting).
A new SPA feature has been added for dnode accounting as well as
a new ZPL version. The SPA feature must be enabled in the pool
before upgrading the zfs filesystem. During the zfs version upgrade,
a "quotacheck" will be executed by marking all dnode as dirty.
ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
Move the synchronization of inode/znode i_flgas/pflags into
the respective internal zfs function. This is mostly
mechanical work and shouldn't introduce any functional
changes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Issue #227Closes#5223
Init, compute, and fini methods are changed to work on internal context object.
This is necessary because ABI does not guarantee that SIMD registers will be preserved
on function calls. This is technically the case in Linux kernel in between
`kfpu_begin()/kfpu_end()`, but it breaks user-space tests and some kernels that
don't require disabling preemption for using SIMD (osx).
Use scalar compute methods in-place for small buffers, and when the buffer size
does not meet SIMD size alignment.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Combine incrementally computed fletcher4 checksums. Checksums are combined
a posteriori, allowing for parallel computation on chunks to be implemented if
required. The algorithm is general, and does not add changes in each SIMD
implementation.
New test in ztest verifies incremental fletcher computations.
Checksum combining matrix for two buffers `a` and `b`, where `Ca` and `Cb` are
respective fletcher4 checksums, `Cab` is combined checksum, `s` is size of buffer
`b` (divided by sizeof(uint32_t)) is:
Cab[A] = Cb[A] + Ca[A]
Cab[B] = Cb[B] + Ca[B] + s * Ca[A]
Cab[C] = Cb[C] + Ca[C] + s * Ca[B] + s(s+1)/2 * Ca[A]
Cab[D] = Cb[D] + Ca[D] + s * Ca[C] + s(s+1)/2 * Ca[B] + s(s+1)(s+2)/6 * Ca[A]
NOTE: this calculation overflows for larger buffers. Thus, internally, the calculation
is performed on 8MiB chunks.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Authored by: ilovezfs <ilovezfs@icloud.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
In any pool without the extensible dataset feature flag already enabled,
creating a dataset with dedup set to use one of the new checksums would
result in the following panic as soon as any data was added:
panic[cpu0]/thread=ffffff0006761c40: feature_get_refcount(spa, feature,
&refcount) != 48 (0x30 != 0x30), file: ../../common/fs/zfs/zfeature.c
line 390
Inpsection showed that feature->fi_feature was 7, which is the value of
SPA_FEATURE_EXTENSIBLE_DATASET in the spa_feature enum. This commit
adds extensible dataset as a dependency for the sha512, edonr, and skein
feature flags, which prevents the panic.
OpenZFS-issue: https://www.illumos.org/issues/6585
OpenZFS-commit: 892586e8a1
Porting Notes:
This code was originally from Illumos, but I actually ported it from:
openzfsonosx/zfs@b62a652
Authored by: ilovezfs <ilovezfs@icloud.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Tony Hutter <hutter2@llnl.gov>
zio_checksum_to_feature() expects a zio_checksum enum not a raw property
intval, so the new checksums weren't being detected when the
ZIO_CHECKSUM_VERIFY flag got in the way.
Given a pool without feature@sha512,
zfs create -o dedup=sha512 naughty/fivetwelve_noverify_ds
would fail as expected since the raw intval would indeed be equal to
SPA_FEATURE_SHA512.
However,
zfs create -o dedup=sha512,verify naughty/fivetwelve_verify_ds
would incorrectly succeed because ZIO_CHECKSUM_VERIFY would be in the
way, the raw intval would not be a member of the enum, and
zio_checksum_to_feature() would return SPA_FEATURE_NONE, with the result
that spa_feature_is_enabled() would never be called.
This was first detected with edonr, since in that case verify is
required.
This commit clears the ZIO_CHECKSUM_VERIFY flag before calling
zio_checksum_to_feature() using the ZIO_CHECKSUM_MASK and verifies in
zio_checksum_to_feature() that ZIO_CHECKSUM_MASK has been applied by the
caller to attempt to prevent the same bug from occurring again in the
future.
OpenZFS-issue: https://www.illumos.org/issues/6541
OpenZFS-commit: 971640e6aa
Porting notes:
This code was originally from Illumos, but I actually ported it from:
openzfsonosx/zfs@bef06e1
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported by: Tony Hutter <hutter2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/4185
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee
Porting Notes:
This code is ported on top of the Illumos Crypto Framework code:
b5e030c8db
The list of porting changes includes:
- Copied module/icp/include/sha2/sha2.h directly from illumos
- Removed from module/icp/algs/sha2/sha2.c:
#pragma inline(SHA256Init, SHA384Init, SHA512Init)
- Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since
it now takes in an extra parameter.
- Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c
- Added skein & edonr to libicp/Makefile.am
- Added sha512.S. It was generated from sha512-x86_64.pl in Illumos.
- Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument.
- In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section
to not #include the non-existant endian.h.
- In skein_test.c, renane NULL to 0 in "no test vector" array entries to get
around a compiler warning.
- Fixup test files:
- Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>,
- Remove <note.h> and define NOTE() as NOP.
- Define u_longlong_t
- Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p"
- Rename NULL to 0 in "no test vector" array entries to get around a
compiler warning.
- Remove "for isa in $($ISAINFO); do" stuff
- Add/update Makefiles
- Add some userspace headers like stdio.h/stdlib.h in places of
sys/types.h.
- EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules.
- Update scripts/zfs2zol-patch.sed
- include <sys/sha2.h> in sha2_impl.h
- Add sha2.h to include/sys/Makefile.am
- Add skein and edonr dirs to icp Makefile
- Add new checksums to zpool_get.cfg
- Move checksum switch block from zfs_secpolicy_setprop() to
zfs_check_settable()
- Fix -Wuninitialized error in edonr_byteorder.h on PPC
- Fix stack frame size errors on ARM32
- Don't unroll loops in Skein on 32-bit to save stack space
- Add memory barriers in sha2.c on 32-bit to save stack space
- Add filetest_001_pos.ksh checksum sanity test
- Add option to write psudorandom data in file_write utility
This re-use the framework established for SSE2, SSSE3 and
AVX2. However, GCC is using FP registers on Aarch64, so
unlike SSE/AVX2 we can't rely on the registers being left alone
between ASM statements. So instead, the NEON code uses
C variables and GCC extended ASM syntax. Note that since
the kernel explicitly disable vector registers, they
have to be locally re-enabled explicitly.
As we use the variable's number to define the symbolic
name, and GCC won't allow duplicate symbolic names,
numbers have to be unique. Even when the code is not
going to be used (e.g. the case for 4 registers when
using the macro with only 2). Only the actually used
variables should be declared, otherwise the build
will fails in debug mode.
This requires the replacement of the XOR(X,X) syntax
by a new ZERO(X) macro, which does the same thing but
without repeating the argument. And perhaps someday
there will be a machine where there is a more efficient
way to zero a register than XOR with itself. This affects
scalar, SSE2, SSSE3 and AVX2 as they need the new macro.
It's possible to write faster implementations (different
scheduling, different unrolling, interleaving NEON and
scalar, ...) for various cores, but this one has the
advantage of fitting in the current state of the code,
and thus is likely easier to review/check/merge.
The only difference between aarch64-neon and aarch64-neonx2
is that aarch64-neonx2 unroll some functions some more.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#4801
In the default case the function must return to avoid dereferencing
'prov_mech' which will be NULL.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: candychencan <chen.can2@zte.com.cn>
Closes#5134
coverity scan CID:147531,type: Argument cannot be negative
- may copy data with negative size
coverity scan CID:147532,type: resource leaks
- may close a fd which is negative
coverity scan CID:147533,type: resource leaks
- may call pwrite64 with a negative size
coverity scan CID:147535,type: resource leaks
- may call fdopen with a negative fd
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5176
Cppcheck 1.63 erroneously complains about an uninitialized value
in buf_init(). Newer versions of cppcheck (1.72) handle this
correctly but we'll initialize the value anyway to silence the
warning.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5203
Avoid calculating (1<<64) if lh_prefix_len == 0. Semantics of the method remain
the same.
Assert (lh_prefix_len > 0) in zap_expand_leaf() to detect possibly the same
problem.
Issue #4883
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Explicitly promote variables to correct type. Undefined behavior is
reported because length of int is not well defined by C standard.
Issue #4883
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Undefined operation is reported by running ztest (or zloop) compiled with GCC
UndefinedBehaviorSanitizer. Error only happens on top level of dnode indirection
with large enough offset values. Logically, left shift operation would work,
but bit shift semantics in C, and limitation of uint64_t, do not produce desired
result.
Issue #5059, #4883
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Without plugging, the default 'noop' scheduler will not merge
the BIOs which are part of a large ZIO.
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#5181
Refactor the code in such a way so that inode->i_mode is being set
at the same time zp->z_mode is being changed. This has the effect of
keeping both in sync without relying on zfs_inode_update.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Closes#5158
In arc_state_fini() the `arc_l2c_only->arcs_list[*]` multilists
must be destroyed. This accidentally regressed in d3c2ae1c.
Reviewed by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5151Closes#5152
We must not use d_add_ci if the dentry already has the real name. Otherwise,
d_add_ci()->d_alloc_parallel() will find itself on the lookup hash and wait
on itself causing deadlock.
Tested-by: satmandu
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5124Closes#5141Closes#5147Closes#5148
coverity scan CID:147633,type: sizeof not portable
coverity scan CID:147637,type: sizeof not portable
coverity scan CID:147638,type: sizeof not portable
coverity scan CID:147640,type: sizeof not portable
In these particular cases sizeof (XX **) happens to be equal to sizeof (X *),
but this is not a portable assumption.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5144
dbuf_read_impl() returns (SET_ERROR(err)) when err can be 0, which adds
lots of noise in tracing logs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#4430Closes#5146
The type of "adjustmnt" was erroneously changed to unsigned when the compressed
ARC code was ported in d3c2ae1c08.
As a result of it being unsigned, the balanced metadata eviction logic
would evict all of the non-metadata.
Reviewed-by: Chris Severance <github.severach@spamgourmet.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: David Quigley <david.quigley@intel.com>
Signed-off-by: Tim Chase <tim@onlight.com>
Closes#5128Closes#5129
Enable ignore_hole_birth by default until all known hole birth bugs
have been resolved and relevant test cases added.
Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4809Closes#5099
Simplify time handling in zfs_setattr by mimicking the logic in
setattr_copy from the linux kernel. In order to achieve this
in the case when ZFS' log is being replayed it is necessary
to unconditionally set the ctime in zfs_replay_setattr.
Also use the timespec_trunc function when assigning values to the
generic inode struct. This is currently a noop since zfs sets
s_time_gran to 1, however in the future rules about precision might
change.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Closes#4916
ZFS doesn't provide a custom update_time method meaning it delegates
this job to the generic VFS layer. The only time when it needs to
set the various *time values is when the inode is being marshalled
to/from the disk. Do this by moving the relevant code from
zfs_inode_update_impl to zfs_node_alloc and zfs_rezget. As a result
from this change it is no longer necessary to have multiple versions
of the zfs_inode_update function - so just nuke them and leave only
one.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Issue #227Closes#4916
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: David Quigley <david.quigley@intel.com>
This review covers the reading and writing of compressed arc headers, sharing
data between the arc_hdr_t and the arc_buf_t, and the implementation of a new
dbuf cache to keep frequently access data uncompressed.
I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs
off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block
for that DVA. The physical block may or may not be compressed. If compressed
arc is enabled and the block on-disk is compressed, then the b_pdata will match
the block on-disk and remain compressed in memory. If the block on disk is not
compressed, then neither will the b_pdata. Lastly, if compressed arc is
disabled, then b_pdata will always be an uncompressed version of the on-disk
block.
Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict
any arc_buf_t's that are no longer referenced. This means that the arc will
primarily have compressed blocks as the arc_buf_t's are considered overhead and
are always uncompressed. When a consumer reads a block we first look to see if
the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new
arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If
the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t
and bcopy the uncompressed contents from the first arc_buf_t to the new one.
Writing to the compressed arc requires that we first discard the b_pdata since
the physical block is about to be rewritten. The new data contents will be
passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we
will copy the physical block contents to a newly allocated b_pdata.
When an l2arc is inuse it will also take advantage of the b_pdata. Now the
l2arc will always write the contents of b_pdata to the l2arc. This means that
when compressed arc is enabled that the l2arc blocks are identical to those
stored in the main data pool. This provides a significant advantage since we
can leverage the bp's checksum when reading from the l2arc to determine if the
contents are valid. If the compressed arc is disabled, then we must first
transform the read block to look like the physical block in the main data pool
before comparing the checksum and determining it's valid.
OpenZFS-issue: https://www.illumos.org/issues/6950
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0
Issue #5078
Several assignments to arc_c had no effect because it is ultimately
initialized to arc_c_max.
This aligns ZoL better with the upstream code which removed these
assignments some time ago.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@onlight.com>
Closes#5081
In case sav->sav_config was NULL the body of the function
would skip the iteration of the l2 cache devices and will
just cleanup the old devices. However, this wasn't very obvious
since the null check was performed after the loop body and after
the old devices were cleaned. Refactor the code so that it's now
obvious when the iteration of the l2cache devices is skipped.
This fixes the following cppcheck warning:
[module/zfs/spa.c:1552]: (error) Possible null pointer dereference: newvdevs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Closes#5087
Since they're allocated with spa_strdup(), they should be freed with
spa_strfree() so the proper length buffer is freed.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5082Closes#5086
This first phase brings over the ZFS SLM module, zfs_mod.c, to handle
auto operations in response to disk events. Disk event monitoring is
provided from libudev and generates the expected payload schema for
zfs_mod. This work leverages the recently added devid and phys_path
strings in the vdev label.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#4673
These allocations can never fail. Leaving the error handling
code here gives the impression they can so it has been removed.
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5048
