Commit Graph

544 Commits

Author SHA1 Message Date
Alek P
e4b6b2db12 OpenZFS 8414 - Implemented zpool scrub pause/resume
Authored by: Alek Pinchuk <apinchuk@datto.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Alek Pinchuk <apinchuk@datto.com>

OpenZFS-issue: https://www.illumos.org/issues/8414
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c29616076
Closes #6538
2017-08-24 10:27:20 -07:00
Tom Caputi
9b8407638d Send / Recv Fixes following b52563
This patch fixes several issues discovered after
the encryption patch was merged:

* Fixed a bug where encrypted datasets could attempt
  to receive embedded data records.

* Fixed a bug where dirty records created by the recv
  code wasn't properly setting the dr_raw flag.

* Fixed a typo where a dmu_tx_commit() was changed to
  dmu_tx_abort()

* Fixed a few error handling bugs unrelated to the
  encryption patch in dmu_recv_stream()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6512 
Closes #6524 
Closes #6545
2017-08-23 16:54:24 -07:00
Don Brady
d977122da9 Add corruption failure option to zinject(8)
Added a 'corrupt' error option that will flip a bit in the data
after a read operation.  This is useful for generating checksum
errors at the device layer (in a mirror config for example). It
is also used to validate the diagnosis of checksum errors from
the zfs diagnosis engine.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6345
2017-08-14 15:17:15 -07:00
Tom Caputi
b525630342 Native Encryption for ZFS on Linux
This change incorporates three major pieces:

The first change is a keystore that manages wrapping
and encryption keys for encrypted datasets. These
commands mostly involve manipulating the new
DSL Crypto Key ZAP Objects that live in the MOS. Each
encrypted dataset has its own DSL Crypto Key that is
protected with a user's key. This level of indirection
allows users to change their keys without re-encrypting
their entire datasets. The change implements the new
subcommands "zfs load-key", "zfs unload-key" and
"zfs change-key" which allow the user to manage their
encryption keys and settings. In addition, several new
flags and properties have been added to allow dataset
creation and to make mounting and unmounting more
convenient.

The second piece of this patch provides the ability to
encrypt, decyrpt, and authenticate protected datasets.
Each object set maintains a Merkel tree of Message
Authentication Codes that protect the lower layers,
similarly to how checksums are maintained. This part
impacts the zio layer, which handles the actual
encryption and generation of MACs, as well as the ARC
and DMU, which need to be able to handle encrypted
buffers and protected data.

The last addition is the ability to do raw, encrypted
sends and receives. The idea here is to send raw
encrypted and compressed data and receive it exactly
as is on a backup system. This means that the dataset
on the receiving system is protected using the same
user key that is in use on the sending side. By doing
so, datasets can be efficiently backed up to an
untrusted system without fear of data being
compromised.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #494 
Closes #5769
2017-08-14 10:36:48 -07:00
bunder2015
0f69f42b43 Correct man page generation
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #6409
Closes #6410
2017-07-27 19:06:34 -07:00
Olaf Faaland
b9373170e3 Add zgenhostid utility script
Turning the multihost property on requires that a hostid be set to allow
ZFS to determine when a foreign system is attemping to import a pool.
The error message instructing the user to set a hostid refers to
genhostid(1).

Genhostid(1) is not available on SUSE Linux.  This commit adds a script
modeled after genhostid(1) for those users.

Zgenhostid checks for an /etc/hostid file; if it does not exist, it
creates one and stores a value.  If the user has provided a hostid as an
argument, that value is used.  Otherwise, a random hostid is generated
and stored.

This differs from the CENTOS 6/7 versions of genhostid, which overwrite
the /etc/hostid file even though their manpages state otherwise.

A man page for zgenhostid is added. The one for genhostid is in (1), but
I put zgenhostid in (8) because I believe it's more appropriate.

The mmp tests are modified to use zgenhostid to set the hostid instead
of using the spl_hostid module parameter.  zgenhostid will not replace
an existing /etc/hostid file, so new mmp_clear_hostid calls are
required.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6358
Closes #6379
2017-07-25 13:22:03 -04:00
Giuseppe Di Natale
d6bcf7ff5e Restrict zpool iostat/status -c to search path
zpool iostat/status -c is supposed to be restricted
by its search path, but currently isn't. To prevent
arbitrary scripts from being executed, disallow '/'
from commands.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6353 
Closes #6359
2017-07-24 11:53:59 -07:00
Ned Bass
7a8ed6b8b7 Minor fixes in zpool iostat -c documentation (#6370)
- Use nested [] notation to denote optional script list elements
- Fix space before comma after smarctl(8)
- Fix typo and formatting error in reference to -v option
- Fix spelling errors

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6370
2017-07-20 17:04:35 -07:00
Olaf Faaland
379ca9cf2b Multi-modifier protection (MMP)
Add multihost=on|off pool property to control MMP.  When enabled
a new thread writes uberblocks to the last slot in each label, at a
set frequency, to indicate to other hosts the pool is actively imported.
These uberblocks are the last synced uberblock with an updated
timestamp.  Property defaults to off.

During tryimport, find the "best" uberblock (newest txg and timestamp)
repeatedly, checking for change in the found uberblock.  Include the
results of the activity test in the config returned by tryimport.
These results are reported to user in "zpool import".

Allow the user to control the period between MMP writes, and the
duration of the activity test on import, via a new module parameter
zfs_multihost_interval.  The period is specified in milliseconds.  The
activity test duration is calculated from this value, and from the
mmp_delay in the "best" uberblock found initially.

Add a kstat interface to export statistics about Multiple Modifier
Protection (MMP) updates. Include the last synced txg number, the
timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV
label that received the last MMP update, and the VDEV path.  Abbreviated
output below.

$ cat /proc/spl/kstat/zfs/mypool/multihost
31 0 0x01 10 880 105092382393521 105144180101111
txg   timestamp  mmp_delay   vdev_guid   vdev_label vdev_path
20468    261337  250274925   68396651780       3    /dev/sda
20468    261339  252023374   6267402363293     1    /dev/sdc
20468    261340  252000858   6698080955233     1    /dev/sdx
20468    261341  251980635   783892869810      2    /dev/sdy
20468    261342  253385953   8923255792467     3    /dev/sdd
20468    261344  253336622   042125143176      0    /dev/sdab
20468    261345  253310522   1200778101278     2    /dev/sde
20468    261346  253286429   0950576198362     2    /dev/sdt
20468    261347  253261545   96209817917       3    /dev/sds
20468    261349  253238188   8555725937673     3    /dev/sdb

Add a new tunable zfs_multihost_history to specify the number of MMP
updates to store history for. By default it is set to zero meaning that
no MMP statistics are stored.

When using ztest to generate activity, for automated tests of the MMP
function, some test functions interfere with the test.  For example, the
pool is exported to run zdb and then imported again.  Add a new ztest
function, "-M", to alter ztest behavior to prevent this.

Add new tests to verify the new functionality.  Tests provided by
Giuseppe Di Natale.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #745
Closes #6279
2017-07-13 13:54:00 -04:00
LOLi
cf8738d853 Add port of FreeBSD 'volmode' property
The volmode property may be set to control the visibility of ZVOL
block devices.

This allow switching ZVOL between three modes:
   full - existing fully functional behaviour (default)
   dev  - hide partitions on ZVOL block devices
   none - not exposing volumes outside ZFS

Additionally the new zvol_volmode module parameter can be used to
control the default behaviour.

This functionality can be used, for instance, on "backup" pools to
avoid cluttering /dev with unneeded zd* devices.

Original-patch-by: mav <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>

FreeBSD-commit: https://github.com/freebsd/freebsd/commit/dd28e6bb
Closes #1796 
Closes #3438 
Closes #6233
2017-07-12 13:05:37 -07:00
Matthew Ahrens
a896468c78 OpenZFS 8067 - zdb should be able to dump literal embedded block pointer
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8067
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085
Closes #6319
2017-07-07 11:28:01 -07:00
Alek P
0ea05c64f8 Implemented zpool scrub pause/resume
Currently, there is no way to pause a scrub. Pausing may
be useful when the pool is busy with other I/O to preserve
bandwidth.

This patch adds the ability to pause and resume scrubbing.
This is achieved by maintaining a persistent on-disk scrub state.
While the state is 'paused' we do not scrub any more blocks.
We do however perform regular scan housekeeping such as
freeing async destroyed and deadlist blocks while paused.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Serapheim Dimitropoulos <serapheimd@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6167
2017-07-06 22:16:13 -07:00
Brian Behlendorf
44f09cdc59 Convert man zfs.8 to mdoc (OpenZFS sync)
* Fixed some typos
* Additional description for some commands arguments
* Text reworked to be in sync with OpenZFS
* Added Linux as .Os type

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6282
2017-06-29 09:55:30 -07:00
George Melikov
cda0317e4d Convert man zpool.8 to mdoc (OpenZFS sync)
* Fixed some typos
* Additional description for some commands arguments
* `listsnapshots` remained
* Text reworked to be in sync with OpenZFS
* Added Linux as .Os type
* Updated `zpool events` section.
* Updated `zpool iostat|status -c` sections
* Added zed(8) reference to SEE ALSO

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #6245
2017-06-28 09:26:46 -07:00
Don Brady
0241e491a0 Inject zinject(8) a percentage amount of dev errs
In the original form of device error injection, it was an all or nothing
situation.  To help simulate intermittent error conditions, you can now
specify a real number percentage value. This is also very useful for our
ZFS fault diagnosis testing and for injecting intermittent errors during
load testing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6227
2017-06-16 17:21:11 -07:00
Giuseppe Di Natale
099700d9df zpool iostat/status -c improvements
Users can now provide their own scripts to be run
with 'zpool iostat/status -c'. User scripts should be
placed in ~/.zpool.d to be included in zpool's
default search path.

Provide a script which can be used with
'zpool iostat|status -c' that will return the type of
device (hdd, sdd, file).

Provide a script to get various values from smartctl
when using 'zpool iostat/status -c'.

Allow users to define the ZPOOL_SCRIPTS_PATH
environment variable which can be used to override
the default 'zpool iostat/status -c' search path.

Allow the ZPOOL_SCRIPTS_ENABLED environment
variable to enable or disable 'zpool status/iostat -c'
functionality.

Use the new smart script to provide the serial command.

Install /etc/sudoers.d/zfs file which contains the sudoer
rule for smartctl as a sample.

Allow 'zpool iostat/status -c' tests to run in tree.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6121 
Closes #6153
2017-06-05 10:52:15 -07:00
Alek P
bec1067d54 Implemented zpool sync command
This addition will enable us to sync an open TXG to the main pool
on demand. The functionality is similar to 'sync(2)' but 'zpool sync'
will return when data has hit the main storage instead of potentially
just the ZIL as is the case with the 'sync(2)' cmd.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6122
2017-05-19 12:33:11 -07:00
Tony Hutter
4a283c7f77 Force fault a vdev with 'zpool offline -f'
This patch adds a '-f' option to 'zpool offline' to fault a vdev
instead of bringing it offline.  Unlike the OFFLINE state, the
FAULTED state will trigger the FMA code, allowing for things like
autoreplace and triggering the slot fault LED.  The -f faults
persist across imports, unless they were set with the temporary
(-t) flag.  Both persistent and temporary faults can be cleared
with zpool clear.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6094
2017-05-19 12:30:16 -07:00
LOLi
a3eeab2de6 Add property overriding (-o|-x) to 'zfs receive'
This allows users to specify "-o property=value" to override and
"-x property" to exclude properties when receiving a zfs send stream.
Both native and user properties can be specified.

This is useful when using zfs send/receive for periodic
backup/replication because it lets users change properties such as
canmount, mountpoint, or compression without modifying the source.

References:
   https://www.illumos.org/issues/2745
   https://www.illumos.org/issues/3753

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #1350 
Closes #5349
2017-05-09 16:21:09 -07:00
Christian Schwarz
305bc4b370 Make createtxg and guid properties public
Document the existence of `createtxg` and `guid` native properties
in man pages and zfs command output.

One of the great features of ZFS is incremental replication of
snapshots, possibly between pools on different machines.

Shell scripts are commonly used to auomate this procedure. They have to
find the most recent common snapshot between both sides and then
perform incremental send & recv.
Currently, scripts rely on the sorting order of `zfs list`, which
defaults to `createtxg`, and the assumption that snapshot names on
either side do not change.

By making `createtxg` and `guid` part of the public ZFS interface,
scripts are enabled to use

  a) `createtxg` to determine the logical & temporal order of snapshots
     (the creation property is not an equivalent substitute since
      multiple snapshots may be created within one second)
  b) `guid` to uniquely identify a snapshot, independent of its current
      display name

This has the potential of making scripts safer and correct.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #6102
2017-05-09 15:36:53 -07:00
LOLi
dddef7d600 More ashift improvements
This commit allow higher ashift values (up to 16) in 'zpool create'

The ashift value was previously limited to 13 (8K block) in b41c990
because the limited number of uberblocks we could fit in the
statically sized (128K) vdev label ring buffer could prevent the
ability the safely roll back a pool to recover it.

Since b02fe35 the largest uberblock size we support is 8K: this
allow us to store a minimum number of 16 uberblocks in the vdev
label, even with higher ashift values.

Additionally change 'ashift' pool property behaviour: if set it will
be used as the default hint value in subsequent vdev operations
('zpool add', 'attach' and 'replace'). A custom ashift value can still
be specified from the command line, if desired.

Finally, fix a bug in add-o_ashift.ksh caused by a missing variable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #2024 
Closes #4205 
Closes #4740 
Closes #5763
2017-05-03 09:31:05 -07:00
Dan Kimmel
a7004725d0 OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7628 - create long versions of ZFS send / receive options

Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: bunder2015 <omfgbunder@gmail.com>
Ported-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Most of 7252 was already picked up during ABD work.  This
  commit represents the gap from the final commit to openzfs.
- Fixed split_large_blocks check in do_dump()
- An alternate version of the write_compressible() function was
  implemented for Linux which does not depend on fio.  The behavior
  of fio differs significantly based on the exact version.
- mkholes was replaced with truncate for Linux.

OpenZFS-issue: https://www.illumos.org/issues/7252
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5602294
Closes #6067
2017-04-26 12:31:43 -07:00
Tony Hutter
d6418de057 Prebaked scripts for zpool status/iostat -c
This patch updates the "zpool status/iostat -c" commands to only run
"pre-baked" scripts from the /etc/zfs/zpool.d directory (or wherever
you install to).  The scripts can only be run from -c as an unprivileged
user (unless the ZPOOL_SCRIPTS_AS_ROOT environment var is
set by root).  This was done to encourage scripts to be written is such
a way that normal users can use them, and to be cautious.  If your
script needs to run a privileged command, consider adding the
appropriate line in /etc/sudoers.  See zpool(8) for an example of how
to do this.

The patch also allows the scripts to output custom column names.  If
the script outputs a line like:

name=value

then "name" is used for the column name, and "value" is its value.
Multiple columns can be specified by outputting multiple lines.  Column
names and values can have spaces.  If the value is empty, a dash (-) is
printed instead.

After all the "name=value" lines are read (if any), zpool will take the
next the next line of output (if any) and print it without a column
header.  After that, no more lines will be processed. This can be
useful for printing errors.

Lastly, this patch also disables the -c option with the latency and
request size histograms, since it produced awkward output and made the
code harder to maintain.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5852
2017-04-21 09:27:04 -07:00
LOLi
038091fd4f Documentation fixes for zfs(8) and 'zfs' binary
* bookmarks are not supported when sending all intermediary snaps (-I)
* add missing compressed (-c) option to the 'zfs' help and manpage

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6028
2017-04-20 12:12:50 -07:00
Richard Yao
066753103f OpenZFS 6392 - zdb: introduce -V for verbatim import
Authored by: Richard Yao <ryao@gentoo.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
  This was already implemented in ZFS on Linux. This patch
  is to resolved the deltas present in our version.

OpenZFS-issue: https://www.illumos.org/issues/6392
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9bb97de
Closes #6020
2017-04-18 09:50:15 -07:00
Brian Behlendorf
a44e7faa6c OpenZFS 6410 - teach zdb to perform object lookups by path
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Replaced zdb.8 with upstream mdoc zdb.1m version.  Updated to
  include Linux specific features: -V verbatium imports and
  improved label printing (-u, and -l).
- Minor changes to `zdb -h` output to honor 80 character limit.

OpenZFS-issue: https://www.illumos.org/issues/6410
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed61ec1
Closes #6006
2017-04-13 09:40:56 -07:00
Tom Matthews
d456708525 list -o props should be alloc,free not used,avail
Manpage suggests the zpool list properties include 'used'
and 'available', when these are invalid property names.
Use alloc and free in their place.

```
$ zpool list -o name,size,used   2>&1 |head -1
bad property list: invalid property 'used'
$ zpool list -o name,size,avail   2>&1 |head -1
bad property list: invalid property 'avail'
$ zpool list -o name,size,available   2>&1 |head -1
bad property list: invalid property 'available'
$ zpool list -o name,size,alloc,free
NAME    SIZE  ALLOC   FREE
apool   464M   203M   261M
bpool  3.62T  1.97T  1.65T
```

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Matthews <tom@axiom-partners.com>
Closes #5959
2017-04-04 11:03:33 -07:00
DeHackEd
f974e41426 zfs(8) fixes
Documentation fixes for zfs(8)

* White space issue in the userused@user property section
* zfs send supports using bookmarks as the origin snapshot

Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes #5906
2017-03-20 15:14:28 -07:00
Chunwei Chen
9b77d1c958 Fix nfs snapdir automount
The current implementation for allowing nfs to access snapdir is very buggy.
It uses a special fh for snapdirs, such that the next time nfsd does
fh_to_dentry, it actually returns the root inode inside the snapshot. So nfsd
never knows it cross a mountpoint.

The problem is that nfsd will not hold a reference on the vfsmount of the
snapshot. This cause auto unmounter to unmount the snapshot even though nfs is
still holding dentries in it.

To fix this, we return the inode for the snapdirs themselves. However, we also
trigger automount upon fh_to_dentry, and return ESTALE so nfsd will revalidate
and see the mountpoint and do crossmnt.

Because nfsd will now be aware that these are different filesystems users
must add crossmnt to their export options to access snapshot directories.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #3794
Closes #4716
Closes #5810 
Closes #5833
2017-03-08 09:26:33 -08:00
bunder2015
db4ed56538 Corrected highlight for zpool man page
SS is already highlighted and the fB/fR tags break the highlighting
prematurely, removing the tags highlights the entire line.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #5873
2017-03-07 13:01:39 -08:00
Olaf Faaland
3c9e0d673e Dump unique configurations and Uberblocks in zdb -lu
For zdb -l, detect when the configuration nvlist in some label l (l>0)
is the same as a configuration already dumped.  If so, do not dump it.

Make a similar check when dumping Uberblocks for zdb -lu.  Check whether
a label already dumped contains an identical Uberblock.  If so, do not
dump the Uberblock.

When dumping a configuration or Uberblock, state which labels it is
found in (0-3), for example: labels = 1 2 3

Detecting redundant uberblocks or configurations is accomplished by
calculating checksums of the uberblocks and the packed nvlists
containing the configuration.

If there is nothing unique to be dumped for a label (ie the
configuration and uberblocks have checksums matching those already
dumped) print nothing for that label.

With additional l's or u's, increase verbosity as follows:

-l      Dump each unique configuration only once.
        Indicate which labels it appears in.
-ll     In addition, dump label space usage stats.
-lll    Dump every configuration, unique or not.

-u      Dump each unique, valid, uberblock only once.
        Indicate which labels it appears in.
-uu     In addition, state which slots are invalid.
-uuu    Dump every uberblock, unique or not.
-uuuu   Dump the uberblock blockpointer (used to be -uuu)

Make exit values conform to the manual page.  Failing to unpack a
configuration nvlist is considered an error, as well as failing to open
or read from the device.

Add three tests, zdb_00{3,4,5}_pos to verify the above functionality.

An example of the output:
	------------------------------------
	LABEL 0
	------------------------------------
	    version: 5000
	    name: 'pool'
	    state: 1
	    txg: 880
	    < ... redacted ... >
	    features_for_read:
		com.delphix:hole_birth
		com.delphix:embedded_data
	    labels = 0
	    Uberblock[0]
		magic = 0000000000bab10c
		version = 5000
		txg = 0
		guid_sum = 3038694082047428541
		timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017
		labels = 0 1 2 3
	    Uberblock[4]
		magic = 0000000000bab10c
		version = 5000
		txg = 772
		guid_sum = 9045970794941528051
		timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017
		labels = 0
	    < ... redacted ... >
	------------------------------------
	LABEL 1
	------------------------------------
	    version: 5000
	    name: 'pool'
	    state: 1
	    txg: 14
	    < ... redacted ... >
		com.delphix:embedded_data
	    labels = 1 2 3
	    Uberblock[4]
		magic = 0000000000bab10c
		version = 5000
		txg = 4
		guid_sum = 7793930272573252584
		timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017
		labels = 1 2 3
	    < ... redacted ... >

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5738
2017-03-06 16:01:45 -08:00
Tony Hutter
b291029e86 Enclosure LED fixes
- Pass $VDEV_ENC_SYSFS_PATH to 'zpool [iostat|status] -c' to include
  enclosure LED sysfs path.

- Set LEDs correctly after import.  This includes clearing any erroniously
  set LEDs prior to the import, and setting the LED for any UNAVAIL drives.

- Include symlink for vdev_attach-led.sh in Makefile.am.

- Print the VDEV path in all-syslog.sh, and fix it so the pool GUID actually
  prints.    

Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5716 
Closes #5751
2017-02-10 16:09:45 -08:00
Don Brady
35a357a9ef OpenZFS 6866 - zdb -l non-zero status if no label
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Don Brady <don.brady@intel.com>

OpenZFS-issue: https://www.illumos.org/issues/6866
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3e4fae5
Closes #5730 

Porting Notes:
- Omitted the illumos-specific `/dev/dsk` and `/dev/rdsk`
path conversions since they don't apply on linux.
2017-02-03 14:18:28 -08:00
George Melikov
ed828c0c37 OpenZFS 7280 - Allow changing global libzpool variables in zdb and ztest through command line
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7280
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0e60744
Closes #5676
2017-01-31 10:13:10 -08:00
George Melikov
fa603f8233 OpenZFS 7277 - zdb should be able to print zfs_dbgmsg's
Porting notes:
- 'zfs_dbgmsg_print()' reintroduced to userspace.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7277
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29bdd2f
Closes #5684
2017-01-28 12:16:43 -08:00
George Melikov
aeacdefedc OpenZFS 7386 - zfs get does not work properly with bookmarks
Authored by: Marcel Telka <marcel@telka.sk>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7386
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/edb901a
Closes #5666
2017-01-26 14:42:15 -08:00
Håkan Johansson
9ef3906a5a Minor man-page formatting fixes
fB -> \fB in zpool.8 (Properties -> cachefile)
\fN -> \fB in zfs-module-parameters.5 (zfs_dirty_data_max_max_percent)
Three | -> \fR|\fI fixes for arguments of diff and inherit in zfs.8.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5645
2017-01-24 09:09:02 -08:00
George Melikov
a0aacd3741 OpenZFS 7257 - zfs manpage user property length needs to be updated
Since zpool version 16, this limit is actually 8192 characters.
Additionally, this limit is actually 8192 bytes, as it supports UTF-8.

Authored by: Eli Rosenthal <eli.rosenthal@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7257
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3bc7169
Closes #5608
2017-01-17 15:30:01 -08:00
George Melikov
fdbaf44ffb OpenZFS 7276 - zfs(1m) manpage could better describe space properties
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7276
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d750135
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29c6739
Closes #5549
2017-01-13 13:31:29 -08:00
ka7
4e33ba4c38 Fix spelling
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5547 
Closes #5543
2017-01-03 11:31:18 -06:00
bunder2015
53ed2db212 Remove extra + from zfs man page
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #5508
2016-12-21 11:06:02 -08:00
Tony Hutter
8720e9e748 Add -c to zpool iostat & status to run command
This patch adds a command (-c) option to zpool status and zpool iostat.  The
-c option allows you to run an arbitrary command on each vdev and display
the first line of output in zpool status/iostat.  The environment vars
VDEV_PATH and VDEV_UPATH are set to the vdev's path and "underlying path"
before running the command.  For device mapper, multipath, or partitioned
vdevs, VDEV_UPATH is the actual underlying /dev/sd* disk.  This can be useful
if the command you're running requires a /dev/sd* device.

The patch also uses /sys/block/<dev>/slaves/ to lookup the underlying device
instead of using libdevmapper.  This not only removes the libdevmapper
requirement at build time, but also allows you to resolve device mapper
devices without being root.  This means that UDEV_UPATH get set correctly
when running zpool status/iostat as an unprivileged user.

Example:

$ zpool status -c 'echo I am $VDEV_PATH, $VDEV_UPATH'

NAME        STATE     READ WRITE CKSUM
mypool      ONLINE       0     0     0
  mirror-0  ONLINE       0     0     0
    mpatha  ONLINE       0     0     0  I am /dev/mapper/mpatha, /dev/sdc
    sdb     ONLINE       0     0     0  I am /dev/sdb1, /dev/sdb

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5368
2016-11-29 14:45:38 -07:00
LOLi
2f71caf2d9 Allow zfs unshare <protocol> -a
Allow `zfs unshare <protocol> -a` command to share or unshare all datasets
of a given protocol, nfs or smb.

Additionally, enable most of ZFS Test Suite zfs_share/zfs_unshare test cases.
To work around some Illumos-specific functionalities ($SHARE/$UNSHARE) some
function wrappers were added around them.

Finally, fix and issue in smb_is_share_active() that would leave SMB shares
exported when invoking 'zfs unshare -a'

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3238 
Closes #5367
2016-11-29 12:22:38 -07:00
Håkan Johansson
1c91161258 Repair indent of zpool.8 man page
Repair indent of zpool.8 man page, just before zpool labelclear
details.  Accidentally introduced by 193a37cb2 (git bisect).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5394
2016-11-14 09:47:49 -08:00
LOLi
e4010f2719 Allow for '-o feature@<feature>=disabled' on the command line
Sometimes it is desirable to specifically disable one or several
features directly on the 'zpool create' command line.

$ zpool create -o feature@<feature>=disabled ...

Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3460 
Closes #5142 
Closes #5324
2016-10-25 16:17:47 -07:00
Tony Hutter
6078881aa1 Multipath autoreplace, control enclosure LEDs, event rate limiting
1. Enable multipath autoreplace support for FMA.

This extends FMA autoreplace to work with multipath disks.  This
requires libdevmapper to be installed at build time.

2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online

Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure
LED for a drive when a drive becomes FAULTED/DEGRADED.  Your enclosure must
be supported by the Linux SES driver for this to work.  The enclosure LED
scripts work for multipath devices as well.  The scripts will clear the LED
when the fault is cleared.

3. Rate limit ZIO delay and checksum events so as not to flood ZED

ZIO delay and checksum events are rate limited to 5/sec in the zfs module.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #2449 
Closes #3017 
Closes #5159
2016-10-19 12:55:59 -07:00
Jinshan Xiong
1de321e626 Add support for user/group dnode accounting & quota
This patch tracks dnode usage for each user/group in the
DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode
accounting have the key prefixed with "obj-" followed by the UID/GID
in string format (as done for the block accounting).
A new SPA feature has been added for dnode accounting as well as
a new ZPL version. The SPA feature must be enabled in the pool
before upgrading the zfs filesystem. During the zfs version upgrade,
a "quotacheck" will be executed by marking all dnode as dirty.

ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
2016-10-07 09:45:13 -07:00
Tony Hutter
3c67d83a8a OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported by: Tony Hutter <hutter2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/4185
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee

Porting Notes:
This code is ported on top of the Illumos Crypto Framework code:

    b5e030c8db

The list of porting changes includes:

- Copied module/icp/include/sha2/sha2.h directly from illumos

- Removed from module/icp/algs/sha2/sha2.c:
	#pragma inline(SHA256Init, SHA384Init, SHA512Init)

- Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since
  it now takes in an extra parameter.

- Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c

- Added skein & edonr to libicp/Makefile.am

- Added sha512.S.  It was generated from sha512-x86_64.pl in Illumos.

- Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument.

- In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section
  to not #include the non-existant endian.h.

- In skein_test.c, renane NULL to 0 in "no test vector" array entries to get
  around a compiler warning.

- Fixup test files:
	- Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>,
	- Remove <note.h> and define NOTE() as NOP.
	- Define u_longlong_t
	- Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p"
	- Rename NULL to 0 in "no test vector" array entries to get around a
	  compiler warning.
	- Remove "for isa in $($ISAINFO); do" stuff
	- Add/update Makefiles
	- Add some userspace headers like stdio.h/stdlib.h in places of
	  sys/types.h.

- EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules.

- Update scripts/zfs2zol-patch.sed

- include <sys/sha2.h> in sha2_impl.h

- Add sha2.h to include/sys/Makefile.am

- Add skein and edonr dirs to icp Makefile

- Add new checksums to zpool_get.cfg

- Move checksum switch block from zfs_secpolicy_setprop() to
  zfs_check_settable()

- Fix -Wuninitialized error in edonr_byteorder.h on PPC

- Fix stack frame size errors on ARM32
  	- Don't unroll loops in Skein on 32-bit to save stack space
  	- Add memory barriers in sha2.c on 32-bit to save stack space

- Add filetest_001_pos.ksh checksum sanity test

- Add option to write psudorandom data in file_write utility
2016-10-03 14:51:15 -07:00
Dan Kimmel
2aa34383b9 DLPX-40252 integrate EP-476 compressed zfs send/receive
Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: David Quigley <david.quigley@intel.com>
Issue #5078
2016-09-13 09:58:58 -07:00
Paul Dagnelie
e6d3a843d6 OpenZFS 6393 - zfs receive a full send as a clone
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6394
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68ecb2e
2016-06-28 13:47:03 -07:00
Matthew Ahrens
47dfff3b86 OpenZFS 2605, 6980, 6902
2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/2605
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12

6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6980
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f

Porting notes:
- All rsend and snapshop tests enabled and updated for Linux.
- Fix misuse of input argument in traverse_visitbp().
- Fix ISO C90 warnings and errors.
- Fix gcc 'missing braces around initializer' in
  'struct send_thread_arg to_arg =' warning.
- Replace 4 argument fletcher_4_native() with 3 argument version,
  this change was made in OpenZFS 4185 which has not been ported.
- Part of the sections for 'zfs receive' and 'zfs send' was
  rewritten and reordered to approximate upstream.
- Fix mktree xattr creation, 'user.' prefix required.
- Minor fixes to newly enabled test cases
- Long holds for volumes allowed during receive for minor registration.
2016-06-28 13:47:02 -07:00
Ned Bass
50c957f702 Implement large_dnode pool feature
Justification
-------------

This feature adds support for variable length dnodes. Our motivation is
to eliminate the overhead associated with using spill blocks.  Spill
blocks are used to store system attribute data (i.e. file metadata) that
does not fit in the dnode's bonus buffer. By allowing a larger bonus
buffer area the use of a spill block can be avoided.  Spill blocks
potentially incur an additional read I/O for every dnode in a dnode
block. As a worst case example, reading 32 dnodes from a 16k dnode block
and all of the spill blocks could issue 33 separate reads. Now suppose
those dnodes have size 1024 and therefore don't need spill blocks.  Then
the worst case number of blocks read is reduced to from 33 to two--one
per dnode block. In practice spill blocks may tend to be co-located on
disk with the dnode blocks so the reduction in I/O would not be this
drastic. In a badly fragmented pool, however, the improvement could be
significant.

ZFS-on-Linux systems that make heavy use of extended attributes would
benefit from this feature. In particular, ZFS-on-Linux supports the
xattr=sa dataset property which allows file extended attribute data
to be stored in the dnode bonus buffer as an alternative to the
traditional directory-based format. Workloads such as SELinux and the
Lustre distributed filesystem often store enough xattr data to force
spill bocks when xattr=sa is in effect. Large dnodes may therefore
provide a performance benefit to such systems.

Other use cases that may benefit from this feature include files with
large ACLs and symbolic links with long target names. Furthermore,
this feature may be desirable on other platforms in case future
applications or features are developed that could make use of a
larger bonus buffer area.

Implementation
--------------

The size of a dnode may be a multiple of 512 bytes up to the size of
a dnode block (currently 16384 bytes). A dn_extra_slots field was
added to the current on-disk dnode_phys_t structure to describe the
size of the physical dnode on disk. The 8 bits for this field were
taken from the zero filled dn_pad2 field. The field represents how
many "extra" dnode_phys_t slots a dnode consumes in its dnode block.
This convention results in a value of 0 for 512 byte dnodes which
preserves on-disk format compatibility with older software.

Similarly, the in-memory dnode_t structure has a new dn_num_slots field
to represent the total number of dnode_phys_t slots consumed on disk.
Thus dn->dn_num_slots is 1 greater than the corresponding
dnp->dn_extra_slots. This difference in convention was adopted
because, unlike on-disk structures, backward compatibility is not a
concern for in-memory objects, so we used a more natural way to
represent size for a dnode_t.

The default size for newly created dnodes is determined by the value of
a new "dnodesize" dataset property. By default the property is set to
"legacy" which is compatible with older software. Setting the property
to "auto" will allow the filesystem to choose the most suitable dnode
size. Currently this just sets the default dnode size to 1k, but future
code improvements could dynamically choose a size based on observed
workload patterns. Dnodes of varying sizes can coexist within the same
dataset and even within the same dnode block. For example, to enable
automatically-sized dnodes, run

 # zfs set dnodesize=auto tank/fish

The user can also specify literal values for the dnodesize property.
These are currently limited to powers of two from 1k to 16k. The
power-of-2 limitation is only for simplicity of the user interface.
Internally the implementation can handle any multiple of 512 up to 16k,
and consumers of the DMU API can specify any legal dnode value.

The size of a new dnode is determined at object allocation time and
stored as a new field in the znode in-memory structure. New DMU
interfaces are added to allow the consumer to specify the dnode size
that a newly allocated object should use. Existing interfaces are
unchanged to avoid having to update every call site and to preserve
compatibility with external consumers such as Lustre. The new
interfaces names are given below. The versions of these functions that
don't take a dnodesize parameter now just call the _dnsize() versions
with a dnodesize of 0, which means use the legacy dnode size.

New DMU interfaces:
  dmu_object_alloc_dnsize()
  dmu_object_claim_dnsize()
  dmu_object_reclaim_dnsize()

New ZAP interfaces:
  zap_create_dnsize()
  zap_create_norm_dnsize()
  zap_create_flags_dnsize()
  zap_create_claim_norm_dnsize()
  zap_create_link_dnsize()

The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The
spa_maxdnodesize() function should be used to determine the maximum
bonus length for a pool.

These are a few noteworthy changes to key functions:

* The prototype for dnode_hold_impl() now takes a "slots" parameter.
  When the DNODE_MUST_BE_FREE flag is set, this parameter is used to
  ensure the hole at the specified object offset is large enough to
  hold the dnode being created. The slots parameter is also used
  to ensure a dnode does not span multiple dnode blocks. In both of
  these cases, if a failure occurs, ENOSPC is returned. Keep in mind,
  these failure cases are only possible when using DNODE_MUST_BE_FREE.

  If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0.
  dnode_hold_impl() will check if the requested dnode is already
  consumed as an extra dnode slot by an large dnode, in which case
  it returns ENOENT.

* The function dmu_object_alloc() advances to the next dnode block
  if dnode_hold_impl() returns an error for a requested object.
  This is because the beginning of the next dnode block is the only
  location it can safely assume to either be a hole or a valid
  starting point for a dnode.

* dnode_next_offset_level() and other functions that iterate
  through dnode blocks may no longer use a simple array indexing
  scheme. These now use the current dnode's dn_num_slots field to
  advance to the next dnode in the block. This is to ensure we
  properly skip the current dnode's bonus area and don't interpret it
  as a valid dnode.

zdb
---
The zdb command was updated to display a dnode's size under the
"dnsize" column when the object is dumped.

For ZIL create log records, zdb will now display the slot count for
the object.

ztest
-----
Ztest chooses a random dnodesize for every newly created object. The
random distribution is more heavily weighted toward small dnodes to
better simulate real-world datasets.

Unused bonus buffer space is filled with non-zero values computed from
the object number, dataset id, offset, and generation number.  This
helps ensure that the dnode traversal code properly skips the interior
regions of large dnodes, and that these interior regions are not
overwritten by data belonging to other dnodes. A new test visits each
object in a dataset. It verifies that the actual dnode size matches what
was stored in the ztest block tag when it was created. It also verifies
that the unused bonus buffer space is filled with the expected data
patterns.

ZFS Test Suite
--------------
Added six new large dnode-specific tests, and integrated the dnodesize
property into existing tests for zfs allow and send/recv.

Send/Receive
------------
ZFS send streams for datasets containing large dnodes cannot be received
on pools that don't support the large_dnode feature. A send stream with
large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be
unrecognized by an incompatible receiving pool so that the zfs receive
will fail gracefully.

While not implemented here, it may be possible to generate a
backward-compatible send stream from a dataset containing large
dnodes. The implementation may be tricky, however, because the send
object record for a large dnode would need to be resized to a 512
byte dnode, possibly kicking in a spill block in the process. This
means we would need to construct a new SA layout and possibly
register it in the SA layout object. The SA layout is normally just
sent as an ordinary object record. But if we are constructing new
layouts while generating the send stream we'd have to build the SA
layout object dynamically and send it at the end of the stream.

For sending and receiving between pools that do support large dnodes,
the drr_object send record type is extended with a new field to store
the dnode slot count. This field was repurposed from unused padding
in the structure.

ZIL Replay
----------
The dnode slot count is stored in the uppermost 8 bits of the lr_foid
field. The bits were unused as the object id is currently capped at
48 bits.

Resizing Dnodes
---------------
It should be possible to resize a dnode when it is dirtied if the
current dnodesize dataset property differs from the dnode's size, but
this functionality is not currently implemented. Clearly a dnode can
only grow if there are sufficient contiguous unused slots in the
dnode block, but it should always be possible to shrink a dnode.
Growing dnodes may be useful to reduce fragmentation in a pool with
many spill blocks in use. Shrinking dnodes may be useful to allow
sending a dataset to a pool that doesn't support the large_dnode
feature.

Feature Reference Counting
--------------------------
The reference count for the large_dnode pool feature tracks the
number of datasets that have ever contained a dnode of size larger
than 512 bytes. The first time a large dnode is created in a dataset
the dataset is converted to an extensible dataset. This is a one-way
operation and the only way to decrement the feature count is to
destroy the dataset, even if the dataset no longer contains any large
dnodes. The complexity of reference counting on a per-dnode basis was
too high, so we chose to track it on a per-dataset basis similarly to
the large_block feature.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3542
2016-06-24 13:13:21 -07:00
Brian Behlendorf
f74b821a66 Add zfs allow and zfs unallow support
ZFS allows for specific permissions to be delegated to normal users
with the `zfs allow` and `zfs unallow` commands.  In addition, non-
privileged users should be able to run all of the following commands:

  * zpool [list | iostat | status | get]
  * zfs [list | get]

Historically this functionality was not available on Linux.  In order
to add it the secpolicy_* functions needed to be implemented and mapped
to the equivalent Linux capability.  Only then could the permissions on
the `/dev/zfs` be relaxed and the internal ZFS permission checks used.

Even with this change some limitations remain.  Under Linux only the
root user is allowed to modify the namespace (unless it's a private
namespace).  This means the mount, mountpoint, canmount, unmount,
and remount delegations cannot be supported with the existing code.  It
may be possible to add this functionality in the future.

This functionality was validated with the cli_user and delegation test
cases from the ZFS Test Suite.  These tests exhaustively verify each
of the supported permissions which can be delegated and ensures only
an authorized user can perform it.

Two minor bug fixes were required for test-running.py.  First, the
Timer() object cannot be safely created in a `try:` block when there
is an unconditional `finally` block which references it.  Second,
when running as a normal user also check for scripts using the
both the .ksh and .sh suffixes.

Finally, existing users who are simulating delegations by setting
group permissions on the /dev/zfs device should revert that
customization when updating to a version with this change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #362 
Closes #434 
Closes #4100
Closes #4394 
Closes #4410 
Closes #4487
2016-06-07 09:16:52 -07:00
Tony Hutter
26ef0cc7db OpenZFS 6531 - Provide mechanism to artificially limit disk performance
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6531
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/97e8130

Porting notes:
- Added new IO delay tracepoints, and moved common ZIO tracepoint macros
  to a new trace_common.h file.
- Used zio_delay_taskq() in place of OpenZFS's timeout_generic() function.
- Updated zinject man page
- Updated zpool_scrub test files
2016-05-26 10:11:51 -07:00
Tony Hutter
7e945072d1 Add request size histograms (-r) to zpool iostat, minor man page fix
Add -r option to "zpool iostat" to print request size histograms for the leaf
ZIOs. This includes histograms of individual ZIOs ("ind") and aggregate ZIOs
("agg"). These stats can be useful for seeing how well the ZFS IO aggregator
is working.

$ zpool iostat -r
mypool        sync_read    sync_write    async_read    async_write      scrub
req_size      ind    agg    ind    agg    ind    agg    ind    agg    ind    agg
----------  -----  -----  -----  -----  -----  -----  -----  -----  -----  -----
512             0      0      0      0      0      0    530      0      0      0
1K              0      0    260      0      0      0    116    246      0      0
2K              0      0      0      0      0      0      0    431      0      0
4K              0      0      0      0      0      0      3    107      0      0
8K             15      0     35      0      0      0      0      6      0      0
16K             0      0      0      0      0      0      0     39      0      0
32K             0      0      0      0      0      0      0      0      0      0
64K            20      0     40      0      0      0      0      0      0      0
128K            0      0     20      0      0      0      0      0      0      0
256K            0      0      0      0      0      0      0      0      0      0
512K            0      0      0      0      0      0      0      0      0      0
1M              0      0      0      0      0      0      0      0      0      0
2M              0      0      0      0      0      0      0      0      0      0
4M              0      0      0      0      0      0    155     19      0      0
8M              0      0      0      0      0      0      0    811      0      0
16M             0      0      0      0      0      0      0     68      0      0
--------------------------------------------------------------------------------

Also rename the stray "-G" in the man page to be "-w" for latency histograms.

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #4659
2016-05-25 15:49:35 -07:00
DHE
8342673502 Improve zfs-module-parameters(5)
Various rewrites to the descriptions of module parameters. Corrects
spelling mistakes, makes descriptions them more user-friendly and
describes some ZFS quirks which should be understood before changing
parameter values.

Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4671
2016-05-23 11:08:45 -07:00
Christer Ekholm
3491d6eb06 Consistently use parsable instead of parseable
This is a purely cosmetical change, to consistently prefer one of
two (both acceptable) choises for the word parsable in documentation and
code. I don't really care which to use, but acording to wiktionary
https://en.wiktionary.org/wiki/parsable#English parsable is preferred.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4682
2016-05-23 10:20:42 -07:00
Brian Behlendorf
81b4c075ec Remove additional cruft from manpages
These changes should have been part of the original 930b0d4
commit but were overlooked because 193a37c had not yet been
merged when the original change was ported.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4631
2016-05-17 15:36:46 -07:00
Richard Laager
61a3d06f84 zfs.8: Relative paths must start with ./
Simply containing a slash is not enough, presumably because foo/bar
could be either a dataset or a mountpoint.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #4655
2016-05-16 14:19:57 -07:00
Matthew Ahrens
c5ee751394 Illumos 1644 add ZFS "clones" property
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
 https://www.illumos.org/issues/1644

Ported-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:32 -07:00
Richard Laager
930b0d4c77 Illumos 1502 Remove conversion cruft from manpages
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed by: Garrett D'Amore <garrett.damore@gmail.com>

References:
 https://www.illumos.org/issues/1502

Ported-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Richard Laager <rlaager@wiktel.com>

Conflicts:
	man/man8/zpool.8
2016-05-16 12:26:31 -07:00
Ruben Kerkhof
32a6c3d756 zfs.8 & mount.zfs.8: fix a few typos
filesytem -> filesystem
defntext -> defcontext

Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
2016-05-16 12:26:31 -07:00
Richard Laager
d919da83fa zfs.8 & zpool.8: Standardize property value order
The default value is now always listed first.

Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:31 -07:00
Richard Laager
8fd888baa7 zfs.8 & zpool.8: Various documentation edits
Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:31 -07:00
Richard Laager
8e07f9a916 zfs.8: Improve zfs upgrade documentation
Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:31 -07:00
Richard Laager
9ef21991f3 zfs.8: Cleanup stray code
Bad copy-and-paste?

Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:31 -07:00
Richard Laager
8c5edae993 zfs.8 & zpool.8: Drop legal/illegal
There's a convention in documentation that these words not be used to
mean "invalid".

Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:31 -07:00
Richard Laager
9bb3e153c4 zfs.8: Fix minor typos and the like
This commit only contains the most trivial of changes.

Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:30 -07:00
Richard Laager
879dbef094 zfs.8: Rework native vs user properties
Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:30 -07:00
Richard Laager
6a107f4199 zfs.8 & zpool.8: Linux/Solaris differences
Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:30 -07:00
Richard Laager
a5eb2d8746 zfs.8: Improve mount option documentation
This change is primarily about adding inline references in the
properties section to the traditional mount option names.

There are some other editorial changes too.

Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:30 -07:00
Richard Laager
7e0754c675 zfs.8: Improve consistency in size documentation
Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:30 -07:00
Richard Laager
cab1aa295e zfs.8: Drop references to Oracle documentation
Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:30 -07:00
Richard Laager
76281da4eb zfs.8: zfs get and zfs list accept mountpoints
Signed-off-by: Richard Laager <rlaager@wiktel.com>
2016-05-16 12:26:29 -07:00
Tony Hutter
193a37cb24 Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues
Update the zfs module to collect statistics on average latencies, queue sizes,
and keep an internal histogram of all IO latencies.  Along with this, update
"zpool iostat" with some new options to print out the stats:

-l: Include average IO latencies stats:

 total_wait     disk_wait    syncq_wait    asyncq_wait  scrub
 read  write   read  write   read  write   read  write   wait
-----  -----  -----  -----  -----  -----  -----  -----  -----
    -   41ms      -    2ms      -   46ms      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -      -      -      -      -      -      -      -      -
    -   49ms      -    2ms      -   47ms      -      -      -
    -      -      -      -      -      -      -      -      -
    -    2ms      -    1ms      -      -      -    1ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  2ms    1ms    2ms  412us   26us   25us      -    5ms      -
    -    1ms      -  413us      -   25us      -    5ms      -
    -    1ms      -  460us      -   29us      -    5ms      -
196us    1ms  196us  370us    7us   23us      -    5ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----

-w: Print out latency histograms:

sdb           total           disk         sync_queue      async_queue
latency    read   write    read   write    read   write    read   write   scrub
-------  ------  ------  ------  ------  ------  ------  ------  ------  ------
1ns           0       0       0       0       0       0       0       0       0
...
33us          0       0       0       0       0       0       0       0       0
66us          0       0     107    2486       2     788      12      12       0
131us         2     797     359    4499      10     558     184     184       6
262us        22     801     264    1563      10     286     287     287      24
524us        87     575      71   52086      15    1063     136     136      92
1ms         152    1190       5   41292       4    1693     252     252     141
2ms         245    2018       0   50007       0    2322     371     371     220
4ms         189    7455      22  162957       0    3912    6726    6726     199
8ms         108    9461       0  102320       0    5775    2526    2526      86
17ms         23   11287       0   37142       0    8043    1813    1813      19
34ms          0   14725       0   24015       0   11732    3071    3071       0
67ms          0   23597       0    7914       0   18113    5025    5025       0
134ms         0   33798       0     254       0   25755    7326    7326       0
268ms         0   51780       0      12       0   41593   10002   10002       0
537ms         0   77808       0       0       0   64255   13120   13120       0
1s            0  105281       0       0       0   83805   20841   20841       0
2s            0   88248       0       0       0   73772   14006   14006       0
4s            0   47266       0       0       0   29783   17176   17176       0
9s            0   10460       0       0       0    4130    6295    6295       0
17s           0       0       0       0       0       0       0       0       0
34s           0       0       0       0       0       0       0       0       0
69s           0       0       0       0       0       0       0       0       0
137s          0       0       0       0       0       0       0       0       0
-------------------------------------------------------------------------------

-h: Help

-H: Scripted mode. Do not display headers, and separate fields by a single
    tab instead of arbitrary space.

-q: Include current number of entries in sync & async read/write queues,
    and scrub queue:

 syncq_read    syncq_write   asyncq_read  asyncq_write   scrubq_read
 pend  activ   pend  activ   pend  activ   pend  activ   pend  activ
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0    227    394      0     19      0      0      0      0
    0      0    227    394      0     19      0      0      0      0
    0      0    108     98      0     19      0      0      0      0
    0      0     19     98      0      0      0      0      0      0
    0      0     78     98      0      0      0      0      0      0
    0      0     19     88      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----

-p: Display numbers in parseable (exact) values.

Also, update iostat syntax to allow the user to specify specific vdevs
to show statistics for.  The three options for choosing pools/vdevs are:

Display a list of pools:
    zpool iostat ... [pool ...]

Display a list of vdevs from a specific pool:
    zpool iostat ... [pool vdev ...]

Display a list of vdevs from any pools:
    zpool iostat ... [vdev ...]

Lastly, allow zpool command "interval" value to be floating point:
    zpool iostat -v 0.5

Signed-off-by: Tony Hutter <hutter2@llnl.gov
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4433
2016-05-12 12:36:32 -07:00
Adam Stevko
2a8b84b747 OpenZFS 3993, 4700
3993 zpool(1M) and zfs(1M) should support -p for "list" and "get"
4700 "zpool get" doesn't support -H or -o options

Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/3993
OpenZFS-issue: https://www.illumos.org/issues/4700
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c58b352

Porting notes:
I removed ZoL's zpool_get_prop_literal() in favor of
zpool_get_prop(..., boolean_t literal) since that's what OpenZFS
uses.  The functionality is the same.
2016-05-11 11:49:37 -07:00
Don Brady
39fc0cb557 Add support for devid and phys_path keys in vdev disk labels
This is foundational work for ZED.

Updates a leaf vdev's persistent device strings on Linux platform

* only applies for a dedicated leaf vdev (aka whole disk)
* updated during pool create|add|attach|import
* used for matching device matching during auto-{online,expand,replace}
* stored in a leaf disk config label (i.e. alongside 'path' NVP)
* can opt-out using env var ZFS_VDEV_DEVID_OPT_OUT=YES

Some examples:

    path: '/dev/sdb1'
    devid: 'scsi-350000394a8ca4fbc-part1'
    phys_path: 'pci-0000:04:00.0-sas-0x50000394a8ca4fbf-lun-0'

    path: '/dev/mapper/mpatha'
    devid: 'dm-uuid-mpath-35000c5006304de3f'

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2856
Closes #3978
Closes #4416
2016-03-31 13:45:53 -07:00
Brian Behlendorf
7d11e37e55 Require libblkid
Historically libblkid support was detected as part of configure
and optionally enabled.  This was done because at the time support
for detecting ZFS pool vdevs had just be added to libblkid and
those updated packages were not yet part of many distributions.
This is no longer the case and any reasonably current distribution
will ship a version of libblkid which can detect ZFS pool vdevs.

This patch makes libblkid mandatory at build time and libblkid
the preferred method of scanning for ZFS pools.  For distributions
which include a modern version of libblkid there is no change in
behavior.  Explicitly scanning the default search paths is still
supported and can be enabled with the '-s' command line option.

Additionally making libblkid mandatory means that the 'zpool create'
command can reliably detect if a specified device has an existing
non-ZFS filesystem (ext4, xfs) and print a warning.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2448
2016-03-09 10:39:22 -08:00
Brian Behlendorf
a77f29f93c Change full path subcommand flag from -p to -P
Commit d2f3e29 introduced the -p option which outputs full paths
for vdevs to multiple zpool subcommands.  When this was merged
there was no conflict for this flag letter.  However it's certain
there will be a conflict with the -p (parsable) flag used by other
subcommands.  Therefore, -p is being changed to -P to avoid this.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4368
2016-02-26 09:06:26 -08:00
Richard Yao
d2f3e292dc Add -gLp to zpool subcommands for alt vdev names
The following options have been added to the zpool add, iostat,
list, status, and split subcommands.  The default behavior was
not modified, from zfs(8).

  -g    Display vdev GUIDs  instead  of  the  normal  short
        device  names.  These GUIDs can be used in-place of
        device   names   for    the    zpool    detach/off‐
        line/remove/replace commands.

  -L    Display real paths for vdevs resolving all symbolic
        links. This can be used to lookup the current block
        device  name regardless of the /dev/disk/ path used
        to open it.

  -p    Display  full  paths  for vdevs instead of only the
        last component of the path.  This can  be  used  in
        conjunction with the -L flag.

This behavior may also be enabled using the following environment
variables.

  ZPOOL_VDEV_NAME_GUID
  ZPOOL_VDEV_NAME_FOLLOW_LINKS
  ZPOOL_VDEV_NAME_PATH

This change is based on worked originally started by Richard Yao
to add a -g option.  Then extended by @ilovezfs to add a -L option
for openzfsonosx.  Those changes have been merged, re-factored,
a -p option added and extended to all relevant zpool subcommands.

Original-patch-by: Richard Yao <ryao@gentoo.org>
Extended-by: ilovezfs <ilovezfs@icloud.com>
Extended-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2011
Closes #4341
2016-02-25 11:58:39 -08:00
Matthew Ahrens
9867e8be2a Illumos 4891 - want zdb option to dump all metadata
4891 want zdb option to dump all metadata
Reviewed by: Sonu Pillai <sonu.pillai@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>

We'd like a way for zdb to dump metadata in a machine-readable
format, so that we can bring that back from a customer site for
in-house diagnosis.  Think of it as a crash dump for zpools,
which can be used for post-mortem analysis of a malfunctioning
pool

References:
  https://www.illumos.org/issues/4891
  https://github.com/illumos/illumos-gate/commit/df15e41

Porting notes:
- [cmd/zdb/zdb.c]
  - a5778ea zdb: Introduce -V for verbatim import
  - In main() getopt 'opt' variable removed and the code was
    brought back in line with illumos.
- [lib/libzpool/kernel.c]
  - 1e33ac1 Fix Solaris thread dependency by using pthreads
  - f0e324f Update utsname support
  - 4d58b69 Fix vn_open/vn_rdwr error handling
  - In vn_open() allocate 'dumppath' on heap instead of stack
  - Properly handle 'dump_fd == -1' error path
  - Free 'realpath' after added vn_dumpdir_code block

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-11 11:36:54 -08:00
nathancheek
53e0313506 Man page whitespace
Signed-off-by: nathancheek <myself@nathancheek.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4184
2016-01-11 09:55:50 -08:00
Paul Dagnelie
fcff0f35bd Illumos 5960, 5925
5960 zfs recv should prefetch indirect blocks
5925 zfs receive -o origin=
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>

References:
  https://www.illumos.org/issues/5960
  https://www.illumos.org/issues/5925
  https://github.com/illumos/illumos-gate/commit/a2cdcdd

Porting notes:
- [lib/libzfs/libzfs_sendrecv.c]
  - b8864a2 Fix gcc cast warnings
  - 325f023 Add linux kernel device support
  - 5c3f61e Increase Linux pipe buffer size on 'zfs receive'
- [module/zfs/zfs_vnops.c]
  - 3558fd7 Prototype/structure update for Linux
  - c12e3a5 Restructure zfs_readdir() to fix regressions
- [module/zfs/zvol.c]
  - Function @zvol_map_block() isn't needed in ZoL
  - 9965059 Prefetch start and end of volumes
- [module/zfs/dmu.c]
  - Fixed ISO C90 - mixed declarations and code
  - Function dmu_prefetch() 'int i' is initialized before
    the following code block (c90 vs. c99)
- [module/zfs/dbuf.c]
  - fc5bb51 Fix stack dbuf_hold_impl()
  - 9b67f60 Illumos 4757, 4913
  - 34229a2 Reduce stack usage for recursive traverse_visitbp()
- [module/zfs/dmu_send.c]
  - Fixed ISO C90 - mixed declarations and code
  - b58986e Use large stacks when available
  - 241b541 Illumos 5959 - clean up per-dataset feature count code
  - 77aef6f Use vmem_alloc() for nvlists
  - 00b4602 Add linux kernel memory support

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-08 15:08:19 -08:00
Chris Williamson
23de906c72 Illumos 5745 - zfs set allows only one dataset property to be set at a time
5745 zfs set allows only one dataset property to be set at a time
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Richard PALO <richard@NetBSD.org>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Rich Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5745
  https://github.com/illumos/illumos-gate/commit/3092556

Porting notes:
- Fix the missing braces around initializer, zfs_cmd_t zc = {"\0"};
- Remove extra format argument in zfs_do_set()
- Declare at the top:
  - zfs_prop_t prop;
  - nvpair_t *elem;
  - nvpair_t *next;
  - int i;
- Additionally initialize:
  - int added_resv = 0;
  - zfs_prop_t prop = 0;
- Assign 0 install of NULL for uint64_t types.
  - zc->zc_nvlist_conf = '\0';
  - zc->zc_nvlist_src = '\0';
  - zc->zc_nvlist_dst = '\0';

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3574
2015-12-29 16:59:26 -08:00
Ned Bass
6b4e21c60e Man page white space and spelling corrections
Correct some misspelled words and grammatical errors, and remove
trailing white space in the man pages.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4115
2015-12-18 13:33:37 -08:00
Turbo Fredriksson
b23d54305a Remove shareiscsi description and example from zfs(8).
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-10-13 16:52:29 -07:00
Turbo Fredriksson
291b06c37e Unmount is part of the shutdown process, not the boot process.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #3762
2015-10-13 16:52:02 -07:00
Ned Bass
3af56fd95f Honor xattr=sa dataset property
ZFS incorrectly uses directory-based extended attributes even when
xattr=sa is specified as a dataset property or mount option. Support to
honor temporary mount options including "xattr" was added in commit
0282c4137e. There are two issues with the
mount option handling:

* Libzfs has historically included "xattr" in its list of default mount
  options. This overrides the dataset property, so the dataset is always
  configured to use directory-based xattrs even when the xattr dataset
  property is set to off or sa. Address this by removing "xattr" from
  the set of default mount options in libzfs.

* There was no way to enable system attribute-based extended attributes
  using temporary mount options. Add the mount options "saxattr" and
  "dirxattr" which enable the xattr behavior their names suggest.  This
  approach has the advantages of mirroring the valid xattr dataset
  property values and following existing conventions for mount option
  names.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3787
2015-09-19 14:04:14 -07:00
Brian Behlendorf
0282c4137e Add temporary mount options
Add the required kernel side infrastructure to parse arbitrary
mount options.  This enables us to support temporary mount
options in largely the same way it is handled on other platforms.

See the 'Temporary Mount Point Properties' section of zfs(8)
for complete details.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #985
Closes #3351
2015-09-03 14:14:55 -07:00
Manoj Joseph
93f6d7e2e5 Illumos 5764 - "zfs send -nv" directs output to stderr
5764 "zfs send -nv" directs output to stderr
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Basil Crow <basil.crow@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://github.com/illumos/illumos-gate/commit/dc5f28a
  https://www.illumos.org/issues/5764

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3585
2015-07-14 10:28:32 -07:00
Justin T. Gibbs
99197f034e Illumos 5661 - ZFS: "compression = on" should use lz4 if feature is enabled
5661 ZFS: "compression = on" should use lz4 if feature is enabled
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  https://github.com/illumos/illumos-gate/commit/db1741f
  https://www.illumos.org/issues/5661

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3571
2015-07-10 12:11:45 -07:00
Colin Ian King
8f3439733f man: fix spelling mistakes in manual
A few minor mistakes than should be fixed:

zpool:
  compatability -> compatibility

zfs:
  accessable -> accessible
  availible  -> available

zfs-events:
  availible -> available

zfs-module-parameters:
  proceding -> proceeding

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3544
2015-07-01 10:58:31 -07:00
Hajo Möller
410921241d Add -y option to zpool iostat
sysstat's iostat omits the first report when the -y option is used.
This patch adds that functionality and omits the first report with
statistics since system boot.

Signed-off-by: Hajo Möller <dasjoe@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3439
2015-06-17 10:39:20 -07:00
Turbo Fredriksson
d050c627b5 Improve on the ZFS events documentation
* Add information about the 'zpool events' command in zpool(8).
* More events and payloads defined in zfs-events(5).
* I/O Stages and I/O Flags sections added.
* Remove unused legacy "zio_deadline" payload define.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3467
2015-06-09 11:19:19 -07:00
Tim Chase
b1b85c8772 Zdb should be able to open the root dataset
If the pool/dataset command-line argument is specified with a trailing
slash, for example, "tank/", it is interpreted as the root dataset.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3415
2015-05-15 10:52:46 -07:00
Chris Dunlap
492b1d2ef0 Update ZED copyright boilerplate
This commit updates the copyright boilerplate within the ZED subtree.

The instructions for appending a contributor copyright line have
been removed.  Manually maintaining copyright notices in this
manner is error-prone, imprecise at a file-scope granularity, and
oftentimes inaccurate.  These lines can become a pernicious source of
merge conflicts.  A commit log is better suited to maintaining this
information.  Consequently, a line has been added to the boilerplate
to refer to the git commit log for authoritative copyright attribution.

To account for the scenario where a file may become separated from
the codebase and commit history (i.e., it is copied somewhere else),
a line has been added to identify the file's origin.

http://softwarefreedom.org/resources/2012/ManagingCopyrightInformation.html

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3384
2015-05-11 15:07:00 -07:00
Matthew Ahrens
f1512ee61e Illumos 5027 - zfs large block support
5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5027
  https://github.com/illumos/illumos-gate/commit/b515258

Porting Notes:

* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.

* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes.  Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.

* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize.  This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.

* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX.  This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing.  Therefore, we've set DMU_MAX_ACCESS to 64M.

* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space.  We should be able to relax
this one the ABD patches are merged.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #354
2015-05-11 12:23:16 -07:00
Turbo Fredriksson
859735c095 Add the '-a' option to 'zpool export'
Support exporting all imported pools in one go, using 'zpool export -a'.

This is accomplished by moving the export parts from zpool_do_export()
in to the new function zpool_export_one().  The for_each_pool() function
is used to enumerate the list of pools to be exported.  Passing an argc
of 0 implies the function should be called on all pools.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #3203
2015-05-04 10:17:08 -07:00
Jerry Jelinek
788eb90c4c Illumos 3897 - zfs filesystem and snapshot limits
3897 zfs filesystem and snapshot limits
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/3897
  https://github.com/illumos/illumos-gate/commit/a2afb61

Porting Notes:

dsl_dataset_snapshot_check(): reduce stack usage using kmem_alloc().

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:22:51 -07:00
Paul B. Henson
0bf8501ae1 5410 Document -S option to zfs inherit
5410 Document -S option to zfs inherit
5412 Mention -S option when zfs inherit fails on quota
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/5410
  https://github.com/illumos/illumos-gate/commit/5ff8cfa9

Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3279
2015-04-24 15:16:49 -07:00
DHE
614e598c88 Fix formatting error in zfs(8)
Commit b1a3e93217 accidentally
introduced an intentation error between the 'zfs receive'
and 'zfs allow' detailed documentation sections.

Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3312
2015-04-23 13:59:00 -07:00
Turbo Fredriksson
b467db454e Document bookmarks a little better in zfs(8)
Add a basic summary to zfs(8) describing bookmarks.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3268
2015-04-14 14:07:07 -07:00
Turbo Fredriksson
b1a3e93217 Move duplicate information about the 'zfs send -e' option.
The extra one was under the 'zfs receive' command (which isn't relevant).
Instead, it should have been further up (still in the 'zfs send' option).

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3194
2015-03-19 10:39:43 -07:00
Randall Mason
33c0819425 Fix small spelling mistake
recieve becomes receive

Signed-off-by: Randall Mason <ClashTheBunny@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2877
2014-11-14 15:48:51 -08:00
Turbo Fredriksson
971808ec9f Add a stern warning about dedup
Users intending to use dedup should be clearly advised about
its memory requirements and the risks involved.

Thanx to Sachiru for comments and suggestions.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2754
2014-10-08 17:07:11 -07:00
Turbo Fredriksson
a215ee16c0 Add an example for 'zfs bookmark' to the Example section.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2762
2014-10-07 11:29:26 -07:00
Richard Yao
83e9986f6e Implement -t option to zpool create for temporary pool names
Creating virtual machines that have their rootfs on ZFS on hosts that
have their rootfs on ZFS causes SPA namespace collisions when the
standard name rpool is used. The solution is either to give each guest
pool a name unique to the host, which is not always desireable, or boot
a VM environment containing an ISO image to install it, which is
cumbersome.

26b42f3f9d introduced `zpool import -t
...` to simplify situations where a host must access a guest's pool when
there is a SPA namespace conflict. We build upon that to introduce
`zpool import -t tname ...`. That allows us to create a pool whose
in-core name is tname, but whose on-disk name is the normal name
specified.

This simplifies the creation of machine images that use a rootfs on ZFS.
That benefits not only real world deployments, but also ZFSOnLinux
development by decreasing the time needed to perform rootfs on ZFS
experiments.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2417
2014-09-30 10:46:59 -07:00
Richard Yao
00d2a8c92f zpool import -t should not update cachefile
zpool import's -t parameter is intended for use with -R when operating
on pools that belong to other systems. Like -R, pools imported in this
way should not update the cachefile unless explicitly requested. The
initial implementation allowed the cachefile to be updated when -R was
not used. This went uncaught during testing because -R had implicitly
disabled use of the cachefile.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2417
2014-09-30 10:46:58 -07:00
Chris Dunlap
dcca723ace Refer to ZED's scripts as ZEDLETs
The executables invoked by the ZED in response to a given zevent
have been generically referred to as "scripts".  By convention,
these scripts have aimed to be /bin/sh compatible for reasons of
portability and comprehensibility.  However, the ZED only requires
they be executable and (ideally) capable of reading environment
variables.  As such, these scripts are now referred to as ZEDLETs
(ZFS Event Daemon Linkage for Executable Tasks).

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2735
2014-09-25 13:54:17 -07:00
Turbo Fredriksson
71bd064555 Document environment variables for zdb, zfs, zinject and zpool.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2691
2014-09-18 15:01:03 -07:00
Tim Chase
52dd454d05 Document the "readonly" pool property
This documentation is based FreeBSD's zpool(8) man page.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2682
2014-09-09 11:35:46 -07:00
George Wilson
f3a7f6610f Illumos 4976-4984 - metaslab improvements
4976 zfs should only avoid writing to a failing non-redundant top-level vdev
4978 ztest fails in get_metaslab_refcount()
4979 extend free space histogram to device and pool
4980 metaslabs should have a fragmentation metric
4981 remove fragmented ops vector from block allocator
4982 space_map object should proactively upgrade when feature is enabled
4983 need to collect metaslab information via mdb
4984 device selection should use fragmentation metric
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4976
  https://www.illumos.org/issues/4978
  https://www.illumos.org/issues/4979
  https://www.illumos.org/issues/4980
  https://www.illumos.org/issues/4981
  https://www.illumos.org/issues/4982
  https://www.illumos.org/issues/4983
  https://www.illumos.org/issues/4984
  https://github.com/illumos/illumos-gate/commit/2e4c998

Notes:
    The "zdb -M" option has been re-tasked to display the new metaslab
    fragmentation metric and the new "zdb -I" option is used to control
    the maximum number of in-flight I/Os.

    The new fragmentation metric is derived from the space map histogram
    which has been rolled up to the vdev and pool level and is presented
    to the user via "zpool list".

    Add a number of module parameters related to the new metaslab weighting
    logic.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2595
2014-08-18 08:40:49 -07:00
Turbo Fredriksson
f67d709080 Create an 'overlay' property
Add a new 'overlay' property (default 'off') that controls whether the
filesystem should be mounted even if the mountpoint is busy or if it
should fail with a 'mountpoint not empty'.

Doing overlay mounts is the default mount behavior on Linux, but not
in ZFS. It have been decided that following the ZFS behavior should
be the default, but this overlay allows for site administrator to
override this decision on a per-dataset basis.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2503
2014-08-15 13:39:19 -07:00
Matthew Ahrens
9b67f60560 Illumos 4757, 4913
4757 ZFS embedded-data block pointers ("zero block compression")
4913 zfs release should not be subject to space checks

Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4757
  https://www.illumos.org/issues/4913
  https://github.com/illumos/illumos-gate/commit/5d7b4d4

Porting notes:

For compatibility with the fastpath code the zio_done() function
needed to be updated.  Because embedded-data block pointers do
not require DVAs to be allocated the associated vdevs will not
be marked and therefore should not be unmarked.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2544
2014-08-01 14:28:05 -07:00
Matthew Ahrens
faf0f58c69 Illumos 3835 zfs need not store 2 copies of all metadata
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

Description from Matt Ahrens's bug report at Delphix:

    Add a new zfs property, "redundant_metadata" which can have values
    "all" or "most".  The default will be "all", which is the current
    behavior.  Setting to "most" will cause us to only store 1 copy of
    level-1 indirect blocks of user data files.

Additional notes:

    The new man page section for this property states

        "The exact behavior of which metadata blocks
         are stored redundantly may change in future releases."

    and:

        "When set to most, ZFS stores an extra copy of most types of
         metadata. This can improve performance of random writes,
         because less metadata must be written."

    The current implementation is as described above in Matt's blog.
    It is controlled by a new global integer
    "zfs_redundant_metadata_most_ditto_level", currently initialized
    to 2. When "redundant_metadata" is set to "most", only indirect
    blocks of the specified level and higher will have additional ditto
    blocks created.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2542
2014-07-31 09:49:34 -07:00
Matthew Ahrens
da536844d5 Illumos 4368, 4369.
4369 implement zfs bookmarks
4368 zfs send filesystems from readonly pools
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4369
  https://www.illumos.org/issues/4368
  https://github.com/illumos/illumos-gate/commit/78f1710

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2530
2014-07-29 10:55:29 -07:00
Turbo Fredriksson
79eb71dc6c Support '-H' (scripted mode) to 'zpool get'
This functionality is already available in 'zfs get'.  Providing
it for 'zpool get' is useful and good for consistency.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2522
2014-07-25 11:58:36 -07:00
Richard Yao
a5778ea242 zdb: Introduce -V for verbatim import
When given a pool name via -e, zdb would attempt an import. If it
failed, then it would attempt a verbatim import. This behavior is
not always desirable so a -V switch is added to zdb to control the
behavior. When specified, a verbatim import is done. Otherwise,
the behavior is as it was previously, except no verbatim import
is done on failure.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2372
2014-07-17 11:40:32 -07:00
Tim Chase
52e68edc2d Document the optional "device" argument for "zpool split"
Most ZFS implementations seemed to have missed this bit of documentation.
The additional text is based on FreeBSD's man page.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2416
2014-07-01 14:16:43 -07:00
Turbo Fredriksson
628668a39f Add information about the -o option to zpool replace
Users need to be aware that when replacing devices in an existing
pool they may need to override automatically detected ashift value.
This will all depend on the exact hardware they are using.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2024
2014-06-27 08:31:07 -07:00
SenH
1567e0758b Fix man zpool property feature_guid
The property name gets mangled with the explanation due to the property
length.  Fixed by putting the explanation on the next line.

Before:
  unsupported@feature_Info rmation about unsupported features that are
  enabled on the pool. See zpool-features(5) for details.

After:
  unsupported@feature_guid
  Information about unsupported features that are enabled on the pool. See
  zpool-features(5) for details.

Signed-off-by: SenH <sen@senhaerens.be>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2419
2014-06-26 16:21:15 -07:00
Turbo Fredriksson
21b446a79e Document the -X and -T options to 'zpool import'
These options have existed for a long time but have historically
been undocumented because they are not guaranteed to be safe.  They
should only be used as a last resort when attempting to recover a
damaged pool.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1130
2014-06-06 15:49:34 -07:00
Turbo Fredriksson
beb4be77b7 Man page updates for 'zfs share'
* Remove the references to share(1M), unshare(1M) and dfstab(4)
  since they are not applicable to Linux.
* Add the exact exportfs command line used when setting sharenfs=on.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue: #1641
2014-06-06 13:00:51 -07:00
Turbo Fredriksson
022f7bf68e Document the fact that ashift is vdev specific, not a pool global.
Users need to be aware that when adding devices to an existing pool
they may need to override automatically detected ashift value.
This will all depend on the exact hardware they are using.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2024
2014-06-06 12:52:01 -07:00
Chris Dunlap
9e246ac3d8 Initial implementation of zed (ZFS Event Daemon)
zed monitors ZFS events.  When a zevent is posted, zed will run any
scripts that have been enabled for the corresponding zevent class.
Multiple scripts may be invoked for a given zevent.  The zevent
nvpairs are passed to the scripts as environment variables.

Events are processed synchronously by the single thread, and there is
no maximum timeout for script execution.  Consequently, a misbehaving
script can delay (or forever block) the processing of subsequent
zevents.  Plans are to address this in future commits.

Initial scripts have been developed to log events to syslog
and send email in response to checksum/data/io errors and
resilver.finish/scrub.finish events.  By default, email will only
be sent if the ZED_EMAIL variable is configured in zed.rc (which is
serving as a config file of sorts until a proper configuration file
is implemented).

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
2014-04-02 13:10:03 -07:00
Richard Yao
26b42f3f9d Implement -t option to zpool import for temporary pool names
Originally, users had to handle spa namespace collisions by either
exporting the already imported pool or by specifying a new name for the
pool with a conflicting name. In the case of root pools from virtual
guests, neither approach to collision resolution is reasonable. This is
addressed by extending the new name syntax with a -t option to specify
that the new name is temporary. When specified, this sets an internal
flag that is passed into the kernel to tell it that all label updates
should refer to the name used in the original label. Consequently, the
original pool name will be retained on export.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2189
2014-03-20 12:05:30 -07:00
Turbo Fredriksson
4e26f2fccd Fix NAME section of manpages zhack and fsck.zfs.
In Debian GNU/Linux a program called 'linitian' is used to make sure
that packages conforms to the Debian GNU/Linux packaging guide lines.
This fixes the problem reported as:

     W: zfsutils: manpage-has-bad-whatis-entry usr/share/man/man1/zhack.1.gz
     W: zfsutils: manpage-has-bad-whatis-entry usr/share/man/man8/fsck.zfs.8.gz

Not something that ZoL needs to addhere to, but every other man page
have their NAME section in a special way - why not these two as well?

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2161
2014-03-10 09:19:17 -07:00
Tim Chase
6d111134c0 Implement relatime.
Add the "relatime" property.  When set to "on", a file's atime will only
be updated if the existing atime at least a day old or if the existing
ctime or mtime has been updated since the last access.  This behavior
is compatible with the Linux "relatime" mount option.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2064
Closes #1917
2014-01-29 15:50:44 -08:00
Brian Behlendorf
3566d5c7c3 Remove incorrect use of EXTRA_DIST for man pages
Setting the 'dist_' prefix is the correct way to instruct Automake
to include these files in the distribution.  The EXTRA_DIST variable
is reserved for files which are not covered by the automatic rules.

  http://www.gnu.org/software/automake/manual/automake.html#Basics

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-01-17 11:50:08 -08:00
Matthew Thode
11b9ec23b9 Add full SELinux support
Four new dataset properties have been added to support SELinux.  They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8).  When one of
these properties is set to something other than 'none'.  That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.

For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:

  $ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media

This will ensure the filesystem is automatically mounted with that
rootcontext.  It is equivalent to manually specifying the rootcontext
with the -o option like this:

  $ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media

By default all four contexts are set to 'none'.  Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.

Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #1504
2013-12-19 10:37:31 -08:00
Brian Behlendorf
d17eab9ce0 Update zfs(8) Snapshots section
The Snapshots section of the zfs(8) man page is incorrect and should
have been updated as part of #1312.  Snapshots of volumes can be
accessed independently and their visibility is determined by the
'snapdev=hidden|visible' property.  This is analogous to the existing
'snapdir=hidden|visible' property.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #1921
2013-12-16 09:41:45 -08:00
Yuri Pankov
54d5378fae Illumos #2583
2583 Add -p (parsable) option to zfs list

References:
  https://www.illumos.org/issues/2583
  illumos/illumos-gate@43d68d68c1

Ported-by: Gregor Kopka <gregor@kopka.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #937
2013-11-21 11:13:53 -08:00
Bassu
7a4f54688e Explain 'zfs list -t snap -o name -s name' speedup
Commit 0cee240 from FreeBSD dramatically speeds up 'zfs list'
performance assuming you're only interested in the dataset
names.  This optimization should be mentioned in the man page
to allow end users to take advantage of it.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1847
2013-11-08 14:21:58 -08:00
Tim Chase
b1d13a60d1 Document the dedupditto pool property.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1839
2013-11-08 10:26:17 -08:00
Matthew Ahrens
24a64651b4 Illumos #3588
3588 provide zfs properties for logical (uncompressed) space
     used and referenced
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@dey-sys.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3588
  illumos/illumos-gate@77372cb0f3

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-10-31 10:16:11 -07:00
Massimo Maggi
023699cd62 Posix ACL Support
This change adds support for Posix ACLs by storing them as an xattr
which is common practice for many Linux file systems.  Since the
Posix ACL is stored as an xattr it will not overwrite any existing
ZFS/NFSv4 ACLs which may have been set.  The Posix ACL will also
be non-functional on other platforms although it may be visible
as an xattr if that platform understands SA based xattrs.

By default Posix ACLs are disabled but they may be enabled with
the new 'aclmode=noacl|posixacl' property.  Set the property to
'posixacl' to enable them.  If ZFS/NFSv4 ACL support is ever added
an appropriate acltype will be added.

This change passes the POSIX Test Suite cleanly with the exception
of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too).

  http://www.tuxera.com/community/posix-test-suite/

Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #170
2013-10-29 14:54:26 -07:00
Brian Behlendorf
7c2448a33e Improve xattr property documentation
Extend the xattr property section of zfs(8) such that it covers
both styles of supported xattr.  A short discussion of the benefits
and drawbacks of each type is presented to allow users to make an
informed choice.

Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #170
2013-10-29 13:24:44 -07:00
Ralf Ertzinger
d65e738109 Add -p switch to "zpool get"
This works the same as the -p switch to "zfs get", displaying full
resolution values for appropriate attributes.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1813
2013-10-28 15:40:12 -07:00
Steven Hartland
157c9b6981 Corrected "zfs list -t <type>" syntax
in man page and in command help.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1805
2013-10-25 16:09:21 -07:00
Tim Chase
2e2ddc30b4 Dedup-related documentation additions for zpool and zdb.
Document the "-D" and "-T" options and the optional interval
and count or "zpool status".

Also for zpool's man page, use a consistent order for the
various "-T" options to match the program's help output.

Document the effect of additional "-D" options for zdb.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1786
2013-10-22 10:08:51 -07:00
Neil Stockbridge
65ee05acd7 Update detach section of zpool(8)
The detach section of the zpool(8) man page now suggests the
offline command.  Using offline may be more appropriate for
certain situations.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1776
2013-10-10 16:56:51 -07:00
Matthew Ahrens
13fe019870 Illumos #3464
3464 zfs synctask code needs restructuring
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/3464
  illumos/illumos-gate@3b2aab1880

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1495
2013-09-04 16:01:24 -07:00
Matthew Ahrens
6f1ffb0665 Illumos #2882, #2883, #2900
2882 implement libzfs_core
2883 changing "canmount" property to "on" should not always remount dataset
2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2882
  https://www.illumos.org/issues/2883
  https://www.illumos.org/issues/2900
  illumos/illumos-gate@4445fffbbb

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1293

Porting notes:

WARNING: This patch changes the user/kernel ABI.  That means that
the zfs/zpool utilities built from master are NOT compatible with
the 0.6.2 kernel modules.  Ensure you load the matching kernel
modules from master after updating the utilities.  Otherwise the
zfs/zpool commands will be unable to interact with your pool and
you will see errors similar to the following:

  $ zpool list
  failed to read pool configuration: bad address
  no pools available

  $ zfs list
  no datasets available

Add zvol minor device creation to the new zfs_snapshot_nvl function.

Remove the logging of the "release" operation in
dsl_dataset_user_release_sync().  The logging caused a null dereference
because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the
logging functions try to get the ds name via the dsl_dataset_name()
function. I've got no idea why this particular code would have worked
in Illumos.  This code has subsequently been completely reworked in
Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring).

Squash some "may be used uninitialized" warning/erorrs.

Fix some printf format warnings for %lld and %llu.

Apply a few spa_writeable() changes that were made to Illumos in
illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and
3115 fixes.

Add a missing call to fnvlist_free(nvl) in log_internal() that was added
in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time
(zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-09-04 15:49:00 -07:00
Steven Burgess
e0fd278708 Fix man page for the sync property
The help output of for zfs set/get says that sync can be one of

  standard | always | disabled

but the man pages claim it can be

  sync=default | always | disabled

the accepted value is standard, this changes the manpage to give the
correct values.

Signed-off-by: Steven Burgess <sburgess@dattobackup.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1634
2013-08-07 16:10:21 -07:00
Massimo Maggi
e43b290fdb Fix the default checksum algorithm in the manpage
The manpage reports fletcher2, but in zio.h ZIO_CHECKSUM_ON_VALUE
is defined to ZIO_CHECKSUM_FLETCHER_4.

Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1628
2013-08-07 16:06:19 -07:00
Christer Ekholm
6e1b9d0334 Add documentation for -T and interval to "zpool list"
zpool list has the same options for repeating as zpool iostat
has, but that is not documented. This patch adds the documentation.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-07-22 13:38:51 -07:00
Dmitry Khasanov
131cc95ca7 Add FreeBSD 'zpool labelclear' command
The FreeBSD implementation of zfs adds the 'zpool labelclear'
command.  Since this functionality is helpful and straight
forward to add it is being included in ZoL.

References:
  freebsd/freebsd@119a041dc9

Ported-by: Dmitry Khasanov <pik4ez@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1126
2013-07-09 15:58:05 -07:00
Steven Burgess
e2e229eb18 Formating changes for zpool manpage
Some of these entries were hidden before.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1553
2013-06-28 11:17:36 -07:00
Steven Burgess
fb82700616 Adds zpool split to man page
Adds zpool split documentation to the zpool man page.  I only documented
the options that I could get to work.   While it is documented on some
sun blogs that devices can be specified for split, I was not able to get
that to work during my testing.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1456
2013-06-18 15:30:07 -07:00
George Wilson
5853fe790d Illumos #3306, #3321
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man
     page and help

Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  illumos/illumos-gate@31d7e8fa33
  https://www.illumos.org/issues/3306
  https://www.illumos.org/issues/3321

The vdev_file.c implementation in this patch diverges significantly
from the upstream version.  For consistenty with the vdev_disk.c
code the upstream version leverages the Illumos bio interfaces.
This makes sense for Illumos but not for ZoL for two reasons.

1) The vdev_disk.c code in ZoL has been rewritten to use the
   Linux block device interfaces which differ significantly
   from those in Illumos.  Therefore, updating the vdev_file.c
   to use the Illumos interfaces doesn't get you consistency
   with vdev_disk.c.

2) Using the upstream patch as is would requiring implementing
   compatibility code for those Solaris block device interfaces
   in user and kernel space.  That additional complexity could
   lead to confusion and doesn't buy us anything.

For these reasons I've opted to simply move the existing vn_rdwr()
as is in to the taskq function.  This has the advantage of being
low risk and easy to understand.  Moving the vn_rdwr() function
in to its own taskq thread also neatly avoids the possibility of
a stack overflow.

Finally, because of the additional work which is being handled by
the free taskq the number of threads has been increased.  The
thread count under Illumos defaults to 100 but was decreased to 2
in commit 08d08e due to contention.  We increase it to 8 until
the contention can be address by porting Illumos #3581.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1354
2013-05-03 16:53:52 -07:00
Turbo Fredriksson
4a5b121808 Man page updates for SMB
* Update manpage with more information about the ACL, guest access
  and that samba needs to be able to authenticate user(s).
* Add information that 'net' can be used to modify the share after
  ZFS sharing and that it will be undone with a 'zfs unshare'.
* Give an example on how to mount a SMB filesystem shared via ZFS.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1181
Issue #1170
2013-04-02 10:36:25 -07:00
Nick Garvey
b5d8c5fb08 Correct typos in renaming example
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1373
2013-04-02 09:24:39 -07:00
Darik Horn
ac826e1668 Create fsck.zfs and zhack man pages.
The automake templates have been updated to install them,
and the existing packaging will automatically include them.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Supplements #518
2013-03-19 13:29:13 -07:00
Darik Horn
cf2129e6dc Create mount.zfs, zinject, and zpios man pages.
And update the automake templates to install them.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #518
2013-03-13 13:41:22 -07:00
Brian Behlendorf
2016ff96d1 Fix zdb.8 macro warning
Detected by rpmlint the 'rpool/export/home' section was being
interpretted by troff as an undefined macro.  This resulted
in the 'rpool/export/home' output being omitted from 'man zdb'.

This was caused by starting the line with a ' character.  By
moving the 'in' down to the next line we're able to fix it.

  zfs.x86_64: W: manual-page-warning /usr/share/man/man8/zdb.8.gz
  450: warning: macro `rpool/export/home'' not defined

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-03-06 15:46:41 -08:00
Eric Dillmann
0b4d1b5853 Add snapdev=[hidden|visible] dataset property
The new snapdev dataset property may be set to control the
visibility of zvol snapshot devices.  By default this value
is set to 'hidden' which will prevent zvol snapshots from
appearing under /dev/zvol/ and /dev/<dataset>/.  When set to
'visible' all zvol snapshots for the dataset will be visible.

This functionality was largely added because when automatic
snapshoting is enabled large numbers of read-only zvol snapshots
will be created.  When creating these devices the kernel will
attempt to read their partition tables, and blkid will attempt
to identify any filesystems on those partitions.  This leads
to a variety of issues:

1) The zvol partition tables will be read in the context of
   the `modprobe zfs` for automatically imported pools.  This
   is undesirable and should be done asynchronously, but for
   now reducing the number of visible devices helps.

2) Udev expects to be able to complete its work for a new
   block devices fairly quickly.  When many zvol devices are
   added at the same time this is no longer be true.  It can
   lead to udev timeouts and missing /dev/zvol links.

3) Simply having lots of devices in /dev/ can be aukward from
   a management standpoint.  Hidding the devices your unlikely
   to ever use helps with this.  Any snapshot device which is
   needed can be made visible by changing the snapdev property.

NOTE: This patch changes the default behavior for zvols which
      was effectively 'snapdev=visible'.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1235
Closes #945
Issue #956
Issue #756
2013-03-05 12:37:54 -08:00
Tim Connors
c5b247f335 -x shouldn't warn about old on-disk format or unavailable features
`zpool status -x` should only flag errors or where the pool is
unavailable.  If it imported fine but isn't using the latest features
available in the code, that's not an error.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1319
2013-02-28 09:17:09 -08:00
Brian Behlendorf
52768784e6 Update the zfs.8 "ZFS Volumes as Swap" section
As of 0.6.0-rc11 using ZFS volumes as Linux swap devices is
supported.  Swapping to files in ZFS filesystems is not.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1189
2013-02-07 14:19:40 -08:00
Eric Dillmann
9759c60f1a Illumos #3035 LZ4 compression support in ZFS and GRUB
3035 LZ4 compression support in ZFS and GRUB

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Christopher Siden <csiden@delphix.com>

References:
  illumos/illumos-gate@a6f561b4ae
  https://www.illumos.org/issues/3035
  http://wiki.illumos.org/display/illumos/LZ4+Compression+In+ZFS

This patch has been slightly modified from the upstream Illumos
version to be compatible with Linux.  Due to the very limited
stack space in the kernel a lz4 workspace kmem cache is used.
Since we are using gcc we are also able to take advantage of the
gcc optimized __builtin_ctz functions.

Support for GRUB has been dropped from this patch.  That code
is available but those changes will need to made to the upstream
GRUB package.

Lastly, several hunks of dead code were dropped for clarity.  They
include the functions real_LZ4_uncompress(), LZ4_compressBound()
and the Visual Studio specific hunks wrapped in _MSC_VER.

Ported-by: Eric Dillmann <eric@jave.fr>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1217
2013-01-29 09:28:20 -08:00
Yuri Pankov
5990da81a7 Illumos #1884, #3028, #3048, #3049, #3060, #3061, #3093
1884 Empty "used" field for zfs *space commands
3028 zfs {group,user}space -n prints (null) instead of numeric GID/UID
3048 zfs {user,group}space [-s|-S] is broken
3049 zfs {user,group}space -t doesn't really filter the results
3060 zfs {user,group}space -H output isn't tab-delimited
3061 zfs {user,group}space -o doesn't use specified fields order
3093 zfs {user,group}space's -i is noop

Reviewed by: Garry Mills <gary_mills@fastmail.fm>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  illumos/illumos-gate@89f5d17b06
  illumos changeset: 13803:b5e49d71ff0e
  https://www.illumos.org/issues/1884
  https://www.illumos.org/issues/3028
  https://www.illumos.org/issues/3048
  https://www.illumos.org/issues/3049
  https://www.illumos.org/issues/3060
  https://www.illumos.org/issues/3061
  https://www.illumos.org/issues/3093

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1194
2013-01-11 09:17:19 -08:00
Steven Burgess
9566fb1a7b 'zfs send' man page sync'ed with Illumos
* Move -R option up one position in the list to match
  the Illumos documentation.

* Move -D option up one position and refreshed it to
  match the Illumos documentation.

* Move -p option up one position and refreshed it to
  match the Illumos documentation.

* Add the -n, -P  documentation found in zfs receive
  in to zfs send where to belongs.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1187
2013-01-10 13:16:42 -08:00
Steven Burgess
17836f0956 'zfs receive' man page sync'ed with Illumos
The only valid options are -vnFu, these other ones seem to be
misplaced zfs send options.

Remove: -D -r -p -n -P

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1186
2013-01-10 13:16:10 -08:00
Christopher Siden
b9b24bb4ca Illumos #2762: zpool command should have better support for feature flags
2762 zpool command should have better support for feature flags
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@57221772c3
  https://www.illumos.org/issues/2762

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:43 -08:00
Christopher Siden
9ae529ec5d Illumos #2619 and #2747
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@53089ab7c8
  illumos/illumos-gate@ad135b5d64
  illumos changeset: 13700:2889e2596bd6
  https://www.illumos.org/issues/2619
  https://www.illumos.org/issues/2747

NOTE: The grub specific changes were not ported.  This change
must be made to the Linux grub packages.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:35 -08:00
Dominik Honnef
15313c5e18 Fix duplicate words in zpool.8
Remove the duplicate words 'cannot be' from the zpool.8 man page.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1177
2013-01-07 11:34:30 -08:00
Ned Bass
2957f38d78 vdev_id support for device link aliases
Add a vdev_id feature to map device names based on already defined
udev device links.  To increase the odds that vdev_id will run after
the rules it depends on, increase the vdev.rules rule number from 60
to 69.  With this change, vdev_id now provides functionality analogous
to zpool_id and zpool_layout, paving the way to retire those tools.

A defined alias takes precedence over a topology-derived name, but the
two naming methods can otherwise coexist. For example, one might name
drives in a JBOD with the sas_direct topology while naming an internal
L2ARC device with an alias.

For example, the following lines in vdev_id.conf will result in the
creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same
target as the device link specified in the third field.

  #     by-vdev
  #     name     fully qualified or base name of device link
  alias d1       /dev/disk/by-id/wwn-0x5000c5002de3b9ca
  alias d2       wwn-0x5000c5002def789e

Also perform some minor vdev_id cleanup, such as removal of the unused
-s command line option.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #981
2012-12-03 14:04:47 -08:00
Turbo Fredriksson
645fb9cc21 Implemented sharing datasets via SMB using libshare
Add the initial support for the 'smbshare' option using the
existing libshare infrastructure.  Because this implementation
relies on usershares samba version 3.0.23 is required.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #493
2012-12-03 09:42:15 -08:00
Cyril Plisko
df83110856 Add "-o ashift" to zpool add and zpool attach
When adding devices to an existing pool "ashift" property is
auto-detected.  However, if this property was overridden at
the pool creation time (i.e. zpool create -o ashift=12 tank ...)
this may not be what the user wants.  This commit lets the user
specify the value of "ashift" property to be used with newly
added drives. For example,

    zpool add -o ashift=12 tank disk1
    zpool attach -o ashift=12 tank disk1 disk2

Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #566
2012-11-15 11:06:14 -08:00
KORN Andras
c8f259182d zfs.8: add missing info about dedup, mlslabel
These sections were missing from the `zfs.8` man page.  Add them.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1026
2012-10-09 09:54:16 -07:00
Richard Lowe
0677cb6f52 Illumos #2399: zfs manual page does not document use of "zfs diff".
illumos/illumos-gate@3b8be6bf4f
Illumos changeset: 13773:00c2a08cf1bb

2399 zfs manual page does not document use of "zfs diff"

Reviewed by: Joshua M. Clulow <josh@sysmgr.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>

Ported-by: Etienne Dechamps <etienne.dechamps@ovh.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #940
2012-10-03 13:59:02 -07:00
Bill Pijewski
37abac6d55 Illumos #2703: add mechanism to report ZFS send progress
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2703

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-19 13:39:06 -07:00
Chris Siden
1bd201e70d Illumos #1948: zpool list should show more detailed pool info
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <eric.schrock@delphix.com>

References:
  https://www.illumos.org/issues/1948

Ported by:	Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #685
2012-09-19 13:39:05 -07:00
Richard Lowe
dd4769adc0 Illumos #2088 zdb could use a reasonable manual page
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
      https://www.illumos.org/issues/2088

Ported by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #682
2012-09-18 09:09:13 -07:00
Martin Matuska
b79fc3fea9 Add zstreamdump(8) command to examine ZFS send streams.
Obtained from: illumos-gate revision 11935:538c866aaac6
Source: ssh://anonhg@hg.illumos.org/illumos-gate

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #905
2012-09-02 14:54:27 -07:00
Brian Behlendorf
ca8b5af89d Remove autotools products
Remove all of the generated autotools products from the repository
and update the .gitignore files accordingly.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #718
2012-08-27 11:47:44 -07:00
Eric Schrock
db49968e5c Illumos #2635: 'zfs rename -f' to perform force unmount
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <George.Wilson@delphix.com>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/2635

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #717
2012-08-23 10:39:43 -07:00
Andrew Stormont
e346ec25af Illumos #1936: add support for "-t <datatype>" argument to zfs get
Reviewed by: Kartik Mistry <kartik@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1936

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #681
2012-08-23 10:35:59 -07:00
Brian Behlendorf
bb8b81ec62 Illumos #1888: zfs(8) should mention zfs recv -e
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1888

Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #683
2012-08-10 16:30:13 -07:00
Dan McDonald
d96eb2b153 Illumos #1693: persistent 'comment' field for a zpool
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1693

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #678
2012-08-08 11:49:37 -07:00
Etienne Dechamps
ee5fd0bb80 Set zvol discard_granularity to the volblocksize.
Currently, zvols have a discard granularity set to 0, which suggests to
the upper layer that discard requests of arbirarily small size and
alignment can be made efficiently.

In practice however, ZFS does not handle unaligned discard requests
efficiently: indeed, it is unable to free a part of a block. It will
write zeros to the specified range instead, which is both useless and
inefficient (see dnode_free_range).

With this patch, zvol block devices expose volblocksize as their discard
granularity, so the upper layer is aware that it's not supposed to send
discard requests smaller than volblocksize.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #862
2012-08-07 14:55:31 -07:00
Matthew Ahrens
330d06f90d Illumos #1644, #1645, #1646, #1647, #1708
1644 add ZFS "clones" property
1645 add ZFS "written" and "written@..." properties
1646 "zfs send" should estimate size of stream
1647 "zfs destroy" should determine space reclaimed by
     destroying multiple snapshots
1708 adjust size of zpool history data

References:
  https://www.illumos.org/issues/1644
  https://www.illumos.org/issues/1645
  https://www.illumos.org/issues/1646
  https://www.illumos.org/issues/1647
  https://www.illumos.org/issues/1708

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  This change has reordered
all of the new ioctl()s to the end of the list.  This should
help minimize this issue in the future.

Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Albert Lee <trisk@opensolaris.org>
Approved by: Garrett D'Amore <garret@nexenta.com>

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #826
Closes #664
2012-07-31 09:25:30 -07:00
Richard Yao
739a1a82e0 Linux 3.5 compat, end_writeback() changed to clear_inode()
The end_writeback() function was changed by moving the call to
inode_sync_wait() earlier in to evict().   This effecitvely changes
the ordering of the sync but it does not impact the details of
the zfs implementation.

However, as part of this change end_writeback() was renamed to
clear_inode() to reflect the new semantics.  This change does
impact us and clear_inode() now maps to end_writeback() for
kernels prior to 3.5.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #784
2012-07-23 12:29:36 -07:00
Richard Yao
ea1fdf46e2 Linux 3.5 compat, iops->truncate_range() removed
The vmtruncate_range() support has been removed from the kernel in
favor of using the fallocate method in the file_operations table.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
2012-07-23 12:29:32 -07:00
Richard Yao
756c3e5a9c Linux 3.5 compat, eops->encode_fh() takes inodes
The export_operations member ->encode_fh() has been updated to
take both the child and parent inodes.  This interface used to
take the child dentry and a bool describing if the parent is needed.

NOTE: While updating this code I noticed that we do not currently
cleanly handle the case where we're passed a connectable parent.
This code should be audited to make sure we're doing the right thing.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
2012-07-23 12:29:23 -07:00
Etienne Dechamps
b5a28807cd Move partition scanning from userspace to module.
Currently, zpool online -e (dynamic vdev expansion) doesn't work on
whole disks because we're invoking ioctl(BLKRRPART) from userspace
while ZFS still has a partition open on the disk, which results in
EBUSY.

This patch moves the BLKRRPART invocation from the zpool utility to the
module. Specifically, this is done just before opening the device in
vdev_disk_open() which is called inside vdev_reopen(). This requires
jumping through some hoops to get to the disk device from the partition
device, and to make sure we can still open the partition after the
BLKRRPART call.

Note that this new code path is triggered on dynamic vdev expansion
only; other actions, like creating a new pool, are unchanged and still
call BLKRRPART from userspace.

This change also depends on API changes which are available in 2.6.37
and latter kernels.  The build system has been updated to detect this,
but there is no compatibility mode for older kernels.  This means that
online expansion will NOT be available in older kernels.  However, it
will still be possible to expand the vdev offline.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #808
2012-07-17 09:17:31 -07:00
Garrett D'Amore
3541dc6d02 Illumos #1748: desire support for reguid in zfs
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Alexander Stetsenko <ams@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1748

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  If only the user space
component is updated both the 'zpool events' command and the
'zpool reguid' command will not work until the kernel modules
are updated.

Ported by:     Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #665
2012-07-11 13:08:56 -07:00
Richard Yao
6a0936babc Linux 3.4 compat, d_make_root() replaces d_alloc_root()
torvalds/linux@adc0e91ab1 introduced
introduced d_make_root() as a replacement for d_alloc_root(). Further
commits appear to have removed d_alloc_root() from the Linux source
tree. This causes the following failure:

  error: implicit declaration of function 'd_alloc_root'
  [-Werror=implicit-function-declaration]

To correct this we update the code to use the current d_make_root()
interface for readability.  Then we introduce an autotools check
to determine if d_make_root() is available.  If it isn't then we
define some compatibility logic which used the older d_alloc_root()
interface.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #776
2012-06-11 10:04:49 -07:00
Ned A. Bass
821b683436 Add vdev_id for JBOD-friendly udev aliases
vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path
in a storage topology to a channel name.  The channel name is combined
with a disk enclosure slot number to create an alias that reflects the
physical location of the drive.  This is particularly helpful when it
comes to tasks like replacing failed drives.  Slot numbers may also be
re-mapped in case the default numbering is unsatisfactory.  The drive
aliases will be created as symbolic links in /dev/disk/by-vdev.

The only currently supported topologies are sas_direct and sas_switch:

o  sas_direct - a channel is uniquely identified by a PCI slot and a
   HBA port

o  sas_switch - a channel is uniquely identified by a SAS switch port

A multipath mode is supported in which dm-mpath devices are handled by
examining the first running component disk, as reported by 'multipath
-l'.  In multipath mode the configuration file should contain a
channel definition with the same name for each path to a given
enclosure.

vdev_id can replace the existing zpool_id script on systems where the
storage topology conforms to sas_direct or sas_switch.  The script
could be extended to support other topologies as well.  The advantage
of vdev_id is that it is driven by a single static input file that can
be shared across multiple nodes having a common storage toplogy.
zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per
node and a separate slot-mapping file.  However, zpool_id provides the
flexibility of using any device names that show up in
/dev/disk/by-path, so it may still be needed on some systems.

vdev_id's functionality subsumes that of the sas_switch_id script, and
it is unlikely that anyone is using it, so sas_switch_id is removed.

Finally, /dev/disk/by-vdev is added to the list of directories that
'zpool import' will scan.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #713
2012-06-01 08:55:14 -07:00
Brian Behlendorf
b39d3b9f7b Linux 3.3 compat, iops->create()/mkdir()/mknod()
The mode argument of iops->create()/mkdir()/mknod() was changed from
an 'int' to a 'umode_t'.  To prevent a compiler warning an autoconf
check was added to detect the API change and then correctly set a
zpl_umode_t typedef.  There is no functional change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #701
2012-04-30 12:52:38 -07:00
P.SCH
cf81b00a73 ZFS list snapshot property alias
Add support for the `zfs list -t snap` alias which is available under
Oracle Solaris 11.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #640
2012-04-11 12:02:46 -07:00
P.SCH
10b75496bb ZFS snapshot alias
For consistency, and because it's handy, add the 'zfs snap' alias which
was introduced by Oracle Solaris 11.  This includes an update to the
man page to reflect all the available alias (snap, umount, and recv).

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #640
2012-04-11 12:02:31 -07:00
Richard Laager
f4605f07a2 Document the zle compression algorithm
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-04-11 10:42:02 -07:00
Brian Behlendorf
1c5de20ae2 Add --enable-debug-dmu-tx configure option
Allow rigorous (and expensive) tx validation to be enabled/disabled
indepentantly from the standard zfs debugging.  When enabled these
checks ensure that all txs are constructed properly and that a dbuf
is never dirtied without taking the correct tx hold.

This checking is particularly helpful when adding new dmu consumers
like Lustre.  However, for established consumers such as the zpl
with no known outstanding tx construction problems this is just
overhead.

--enable-debug-dmu-tx  - Enable/disable validation of each tx as
--disable-debug-dmu-tx   it is constructed.  By default validation
                         is disabled due to performance concerns.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-23 12:25:17 -07:00
Brian Behlendorf
ebe7e575ea Add .zfs control directory
Add support for the .zfs control directory.  This was accomplished
by leveraging as much of the existing ZFS infrastructure as posible
and updating it for Linux as required.  The bulk of the core
functionality is now all there with the following limitations.

*) The .zfs/snapshot directory automount support requires a 2.6.37
   or newer kernel.  The exception is RHEL6.2 which has backported
   the d_automount patches.

*) Creating/destroying/renaming snapshots with mkdir/rmdir/mv
   in the .zfs/snapshot directory works as expected.  However,
   this functionality is only available to root until zfs
   delegations are finished.

      * mkdir - create a snapshot
      * rmdir - destroy a snapshot
      * mv    - rename a snapshot

The following issues are known defeciences, but we expect them to
be addressed by future commits.

*) Add automount support for kernels older the 2.6.37.  This should
   be possible using follow_link() which is what Linux did before.

*) Accessing the .zfs/snapshot directory via NFS is not yet possible.
   The majority of the ground work for this is complete.  However,
   finishing this work will require resolving some lingering
   integration issues with the Linux NFS kernel server.

*) The .zfs/shares directory exists but no futher smb functionality
   has yet been implemented.

Contributions-by: Rohan Puri <rohan.puri15@gmail.com>
Contributiobs-by: Andrew Barnes <barnes333@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #173
2012-03-22 13:03:47 -07:00
Brian Behlendorf
4b787d75c8 Cleanly support debug packages
Allow a source rpm to be rebuilt with debugging enabled.  This
avoids the need to have to manually modify the spec file.  By
default debugging is still largely disabled.  To enable specific
debugging features use the following options with rpmbuild.

  '--with debug'               - Enables ASSERTs

  # For example:
  $ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm

Additionally, ZFS_CONFIG has been added to zfs_config.h for
packages which build against these headers.  This is critical
to ensure both zfs and the dependant package are using the same
prototype and structure definitions.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-27 14:08:17 -08:00
Etienne Dechamps
30930fba21 Add support for DISCARD to ZVOLs.
DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning.
It allows ZVOL clients to discard (unmap, trim) block ranges from
a ZVOL, thus optimizing disk space usage by allowing a ZVOL to
shrink instead of just grow.

We can't use zfs_space() or zfs_freesp() here, since these functions
only work on regular files, not volumes. Fortunately we can use the
low-level function dmu_free_long_range() which does exactly what we
want.

Currently the discard operation is not added to the log. That's not
a big deal since losing discard requests cannot result in data
corruption. It would however result in disk space usage higher than
it should be. Thus adding log support to zvol_discard() is probably
a good idea for a future improvement.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-09 16:19:38 -08:00
Etienne Dechamps
cb2d19010d Support the fallocate() file operation.
Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is
supported, since it's the only one that matches the behavior of
zfs_space(). This makes it pretty much useless in its current
form, but it's a start.

To support other flag combinations we would need to modify
zfs_space() to make it more flexible, or emulate the desired
functionality in zpl_fallocate().

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #334
2012-02-09 16:19:32 -08:00
Etienne Dechamps
34037afe24 Improve ZVOL queue behavior.
The Linux block device queue subsystem exposes a number of configurable
settings described in Linux block/blk-settings.c. The defaults for these
settings are tuned for hard drives, and are not optimized for ZVOLs. Proper
configuration of these options would allow upper layers (I/O scheduler) to
take better decisions about write merging and ordering.

Detailed rationale:

 - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to
   handle writes of any size, so there's no reason to impose a limit. Let the
   upper layer decide.

 - max_segments and max_segment_size are set to unlimited. zvol_write() will
   copy the requests' contents into a dbuf anyway, so the number and size of
   the segments are irrelevant. Let the upper layer decide.

 - physical_block_size and io_opt are set to the ZVOL's block size. This
   has the potential to somewhat alleviate issue #361 for ZVOLs, by warning
   the upper layers that writes smaller than the volume's block size will be
   slow.

 - The NONROT flag is set to indicate this isn't a rotational device.
   Although the backing zpool might be composed of rotational devices, the
   resulting ZVOL often doesn't exhibit the same behavior due to the COW
   mechanisms used by ZFS. Setting this flag will prevent upper layers from
   making useless decisions (such as reordering writes) based on incorrect
   assumptions about the behavior of the ZVOL.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-07 16:23:06 -08:00
Etienne Dechamps
b18019d2d8 Fix synchronicity for ZVOLs.
zvol_write() assumes that the write request must be written to stable storage
if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed,
"sync" does *not* mean what we think it means in the context of the Linux
block layer. This is well explained in linux/fs.h:

    WRITE:       A normal async write. Device will be plugged.
    WRITE_SYNC:  Synchronous write. Identical to WRITE, but passes down
                 the hint that someone will be waiting on this IO
                 shortly.
    WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush.
    WRITE_FUA:   Like WRITE_SYNC but data is guaranteed to be on
                 non-volatile media on completion.

In other words, SYNC does not *mean* that the write must be on stable storage
on completion. It just means that someone is waiting on us to complete the
write request. Thus triggering a ZIL commit for each SYNC write request on a
ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL
users have no way to express that they actually want data to be written to
stable storage, which means the ZIL is broken for ZVOLs.

The request for stable storage is expressed by the FUA flag, so we must
commit the ZIL after the write if the FUA flag is set. In addition, we must
commit the ZIL before the write if the FLUSH flag is set.

Also, we must inform the block layer that we actually support FLUSH and FUA.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-07 16:23:06 -08:00
Brian Behlendorf
47621f3d76 Linux 3.3 compat, sops->show_options()
The second argument of sops->show_options() was changed from a
'struct vfsmount *' to a 'struct dentry *'.  Add an autoconf check
to detect the API change and then conditionally define the expected
interface.  In either case we are only interested in the zfs_sb_t.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #549
2012-02-03 10:02:01 -08:00
Brian Behlendorf
ab26409db7 Linux 3.1 compat, super_block->s_shrink
The Linux 3.1 kernel has introduced the concept of per-filesystem
shrinkers which are directly assoicated with a super block.  Prior
to this change there was one shared global shrinker.

The zfs code relied on being able to call the global shrinker when
the arc_meta_limit was exceeded.  This would cause the VFS to drop
references on a fraction of the dentries in the dcache.  The ARC
could then safely reclaim the memory used by these entries and
honor the arc_meta_limit.  Unfortunately, when per-filesystem
shrinkers were added the old interfaces were made unavailable.

This change adds support to use the new per-filesystem shrinker
interface so we can continue to honor the arc_meta_limit.  The
major benefit of the new interface is that we can now target
only the zfs filesystem for dentry and inode pruning.  Thus we
can minimize any impact on the caching of other filesystems.

In the context of making this change several other important
issues related to managing the ARC were addressed, they include:

* The dnlc_reduce_cache() function which was called by the ARC
to drop dentries for the Posix layer was replaced with a generic
zfs_prune_t callback.  The ZPL layer now registers a callback to
drop these dentries removing a layering violation which dates
back to the Solaris code.  This callback can also be used by
other ARC consumers such as Lustre.

  arc_add_prune_callback()
  arc_remove_prune_callback()

* The arc_reduce_dnlc_percent module option has been changed to
arc_meta_prune for clarity.  The dnlc functions are specific to
Solaris's VFS and have already been largely eliminated already.
The replacement tunable now represents the number of bytes the
prune callback will request when invoked.

* Less aggressively invoke the prune callback.  We used to call
this whenever we exceeded the arc_meta_limit however that's not
strictly correct since it results in over zeleous reclaim of
dentries and inodes.  It is now only called once the arc_meta_limit
is exceeded and every effort has been made to evict other data from
the ARC cache.

* More promptly manage exceeding the arc_meta_limit.  When reading
meta data in to the cache if a buffer was unable to be recycled
notify the arc_reclaim thread to invoke the required prune.

* Added arcstat_prune kstat which is incremented when the ARC
is forced to request that a consumer prune its cache.  Remember
this will only occur when the ARC has no other choice.  If it
can evict buffers safely without invoking the prune callback
it will.

* This change is also expected to resolve the unexpect collapses
of the ARC cache.  This would occur because when exceeded just the
arc_meta_limit reclaim presure would be excerted on the arc_c
value via arc_shrink().  This effectively shrunk the entire cache
when really we just needed to reclaim meta data.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #466
Closes #292
2012-01-11 11:46:02 -08:00
Darik Horn
28eb9213d8 Linux 3.2 compat: set_nlink()
Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit

  SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170

Use the new set_nlink() kernel function instead.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #462
2011-12-16 20:02:52 -08:00
Darik Horn
e6101ea87f Update the character class in the zpool man page.
ZoL and all Solaris derivatives allow pool names to contain the colon
and space characters. Update the man page to reflect current behavior.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #438
2011-12-16 14:00:38 -08:00
Prakash Surya
6ba3b44614 Add make rule for building Arch Linux packages
Added the necessary build infrastructure for building packages
compatible with the Arch Linux distribution. As such, one can now run:

    $ ./configure
    $ make pkg     # Alternatively, one can run 'make arch' as well

on the Arch Linux machine to create two binary packages compatible with
the pacman package manager, one for the zfs userland utilities and
another for the zfs kernel modules. The new packages can then be
installed by running:

    # pacman -U $package.pkg.tar.xz

In addition, source-only packages suitable for an Arch Linux chroot
environment or remote builder can also be build using the 'sarch' make
rule.

NOTE: Since the source dist tarball is created on the fly from the head
of the build tree, it's MD5 hash signature will be continually influx.
As a result, the md5sum variable was intentionally omitted from the
PKGBUILD files, and the '--skipinteg' makepkg option is used. This may
or may not have any serious security implications, as the source tarball
is not being downloaded from an outside source.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #491
2011-12-14 19:14:23 -08:00
Brian Behlendorf
5547c2f1bf Simplify BDI integration
Update the code to use the bdi_setup_and_register() helper to
simplify the bdi integration code.  The updated code now just
registers the bdi during mount and destroys it during unmount.

The only complication is that for 2.6.32 - 2.6.33 kernels the
helper wasn't available so in these cases the zfs code must
provide it.  Luckily the bdi_setup_and_register() function
is trivial.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #367
2011-11-08 10:19:03 -08:00
Brian Behlendorf
de0a1c099b Autogen refresh for udev changes
Run autogen.sh using the same autotools versions as upstream:

 * autoconf-2.63
 * automake-1.11.1
 * libtool-2.2.6b
2011-08-08 16:30:27 -07:00
Brian Behlendorf
76659dc110 Add backing_device_info per-filesystem
For a long time now the kernel has been moving away from using the
pdflush daemon to write 'old' dirty pages to disk.  The primary reason
for this is because the pdflush daemon is single threaded and can be
a limiting factor for performance.  Since pdflush sequentially walks
the dirty inode list for each super block any delay in processing can
slow down dirty page writeback for all filesystems.

The replacement for pdflush is called bdi (backing device info).  The
bdi system involves creating a per-filesystem control structure each
with its own private sets of queues to manage writeback.  The advantage
is greater parallelism which improves performance and prevents a single
filesystem from slowing writeback to the others.

For a long time both systems co-existed in the kernel so it wasn't
strictly required to implement the bdi scheme.  However, as of
Linux 2.6.36 kernels the pdflush functionality has been retired.

Since ZFS already bypasses the page cache for most I/O this is only
an issue for mmap(2) writes which must go through the page cache.
Even then adding this missing support for newer kernels was overlooked
because there are other mechanisms which can trigger writeback.

However, there is one critical case where not implementing the bdi
functionality can cause problems.  If an application handles a page
fault it can enter the balance_dirty_pages() callpath.  This will
result in the application hanging until the number of dirty pages in
the system drops below the dirty ratio.

Without a registered backing_device_info for the filesystem the
dirty pages will not get written out.  Thus the application will hang.
As mentioned above this was less of an issue with older kernels because
pdflush would eventually write out the dirty pages.

This change adds a backing_device_info structure to the zfs_sb_t
which is already allocated per-super block.  It is then registered
when the filesystem mounted and unregistered on unmount.  It will
not be registered for mounted snapshots which are read-only.  This
change will result in flush-<pool> thread being dynamically created
and destroyed per-mounted filesystem for writeback.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #174
2011-08-04 13:37:38 -07:00
Matt Ahrens
f5fc4acaa7 Illumos #1092: zfs refratio property
Add a "REFRATIO" property, which is the compression ratio based on
data referenced. For snapshots, this is the same as COMPRESSRATIO,
but for filesystems/volumes, the COMPRESSRATIO is based on the
data "USED" (ie, includes blocks in children, but not blocks
shared with the origin).

This is needed to figure out how much space a filesystem would
use if it were not compressed (ignoring snapshots).

Reviewed by: George Wilson <George.Wilson@delphix.com>
Reviewed by: Adam Leventhal <Adam.Leventhal@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Mark Musante <Mark.Musante@oracle.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>

References to Illumos issue and patch:
- https://www.illumos.org/issues/1092
- https://github.com/illumos/illumos-gate/commit/187d6ac08a

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
2011-08-01 12:09:11 -07:00
Brian Behlendorf
7f9d9946f8 Update 'zpool import' man page
The following supported options were missing from the zpool.8
man page.  The OpenSolaris man pages originally used were simply
out of date with the code.

zpool import
  -F Recovery mode
  -m Allow missing log devices
  -N Import but don't mount
  -n Determine if recoverable but don't do it

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-07-19 11:24:20 -07:00
Kyle Fuller
615ab66d18 Provide a rc.d script for archlinux
Unlike most other Linux distributions archlinux installs its
init scripts in /etc/rc.d insead of /etc/init.d.  This commit
provides an archlinux rc.d script for zfs and extends the
build infrastructure to ensure it get's installed in the
correct place.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #322
2011-07-11 14:12:23 -07:00
Brian Behlendorf
e0f86c9862 Update 'zfs send' documentation
The -D and -p options were missing from the manpage.  This commit
adds documentation for these features.

Closes #311
2011-07-08 12:16:09 -07:00
Brian Behlendorf
2cf7f52bc4 Linux compat 2.6.39: mount_nodev()
The .get_sb callback has been replaced by a .mount callback
in the file_system_type structure.  When using the new
interface the caller must now use the mount_nodev() helper.

Unfortunately, the new interface no longer passes the vfsmount
down to the zfs layers.  This poses a problem for the existing
implementation because we currently save this pointer in the
super block for latter use.  It provides our only entry point
in to the namespace layer for manipulating certain mount options.

This needed to be done originally to allow commands like
'zfs set atime=off tank' to work properly.  It also allowed me
to keep more of the original Solaris code unmodified.  Under
Solaris there is a 1-to-1 mapping between a mount point and a
file system so this is a fairly natural thing to do.  However,
under Linux they many be multiple entries in the namespace
which reference the same filesystem.  Thus keeping a back
reference from the filesystem to the namespace is complicated.

Rather than introduce some ugly hack to get the vfsmount and
continue as before.  I'm leveraging this API change to update
the ZFS code to do things in a more natural way for Linux.
This has the upside that is resolves the compatibility issue
for the long term and fixes several other minor bugs which
have been reported.

This commit updates the code to remove this vfsmount back
reference entirely.  All modifications to filesystem mount
options are now passed in to the kernel via a '-o remount'.
This is the expected Linux mechanism and allows the namespace
to properly handle any options which apply to it before passing
them on to the file system itself.

Aside from fixing the compatibility issue, removing the
vfsmount has had the benefit of simplifying the code.  This
change which fairly involved has turned out nicely.

Closes #246
Closes #217
Closes #187
Closes #248
Closes #231
2011-07-01 13:36:39 -07:00
Brian Behlendorf
5c03efc379 Linux compat 2.6.39: security_inode_init_security()
The security_inode_init_security() function now takes an additional
qstr argument which must be passed in from the dentry if available.
Passing a NULL is safe when no qstr is available the relevant
security checks will just be skipped.

Closes #246
Closes #217
Closes #187
2011-07-01 12:40:08 -07:00
Prasad Joshi
b312979252 Tear down and flush the mmap region
The inode eviction should unmap the pages associated with the inode.
These pages should also be flushed to disk to avoid the data loss.
Therefore, use truncate_setsize() in evict_inode() to release the
pagecache.

The API truncate_setsize() was added in 2.6.35 kernel. To ensure
compatibility with the old kernel, the patch defines its own
truncate_setsize function.

Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com>
Closes #255
2011-06-27 09:59:19 -07:00
Christian Kohlschütter
df30f56639 Add "ashift" property to zpool create
Some disks with internal sectors larger than 512 bytes (e.g., 4k) can
suffer from bad write performance when ashift is not configured
correctly.  This is caused by the disk not reporting its actual sector
size, but a sector size of 512 bytes.  The drive may behave this way
for compatibility reasons.  For example, the WDC WD20EARS disks are
known to exhibit this behavior.

When creating a zpool, ZFS takes that wrong sector size and sets the
"ashift" property accordingly (to 9: 1<<9=512), whereas it should be
set to 12 for 4k sectors (1<<12=4096).

This patch allows an adminstrator to manual specify the known correct
ashift size at 'zpool create' time.  This can significantly improve
performance in certain cases.  However, it will have an impact on your
total pool capacity.  See the updated ashift property description
in the zpool.8 man page for additional details.

Valid values for the ashift property range from 9 to 17 (512B-128KB).
Additionally, you may set the ashift to 0 if you wish to auto-detect
the sector size based on what the disk reports, this is the default
behavior.  The most common ashift values are 9 and 12.

  Example:
  zpool create -o ashift=12 tank raidz2 sda sdb sdc sdd

Closes #280

Original-patch-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-06-17 16:35:49 -07:00
Brian Behlendorf
2e08aedba4 Always check -Wno-unused-but-set-variable gcc support
The previous commit 8a7e1ceefa wasn't
quite right.  This check applies to both the user and kernel space
build and as such we must make sure it runs regardless of what
the --with-config option is set too.

For example, if --with-config=kernel then the autoconf test does
not run and we generate build warnings when compiling the kernel
packages.
2011-06-14 16:40:35 -07:00
Brian Behlendorf
8a7e1ceefa Check for -Wno-unused-but-set-variable gcc support
Gcc versions 4.3.2 and earlier do not support the compiler flag
-Wno-unused-but-set-variable.  This can lead to build failures
on older Linux platforms such as Debian Lenny.  Since this is
an optional build argument this changes add a new autoconf check
for the option.  If it is supported by the installed version of
gcc then it is used otherwise it is omited.

See commit's 12c1acde76 and
79713039a2 for the reason the
-Wno-unused-but-set-variable options was originally added.
2011-06-14 14:43:22 -07:00
Brian Behlendorf
df554c148e Fix 'zfs set volsize=N pool/dataset'
This change fixes a kernel panic which would occur when resizing
a dataset which was not open.  The objset_t stored in the
zvol_state_t will be set to NULL when the block device is closed.
To avoid this issue we pass the correct objset_t as the third arg.

The code has also been updated to correctly notify the kernel
when the block device capacity changes.  For 2.6.28 and newer
kernels the capacity change will be immediately detected.  For
earlier kernels the capacity change will be detected when the
device is next opened.  This is a known limitation of older
kernels.

Online ext3 resize test case passes on 2.6.28+ kernels:
$ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023
$ zpool create tank /tmp/zvol
$ zfs create -V 500M tank/zd0
$ mkfs.ext3 /dev/zd0
$ mkdir /mnt/zd0
$ mount /dev/zd0 /mnt/zd0
$ df -h /mnt/zd0
$ zfs set volsize=800M tank/zd0
$ resize2fs /dev/zd0
$ df -h /mnt/zd0

Original-patch-by: Fajar A. Nugraha <github@fajar.net>
Closes #68
Closes #84
2011-05-02 08:54:40 -07:00
Gunnar Beutner
055656d4f4 Implemented NFS export_operations.
Implemented the required NFS operations for exporting ZFS datasets
using the in-kernel NFS daemon.
2011-04-29 12:36:13 -07:00
Richard Laager
4da4a9e1a7 Cleanup various Sun/Solaris-isms
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:42:42 -07:00
Richard Laager
251eb26d17 Update the version in the zpool upgrade example
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:40:45 -07:00
Richard Laager
3b2041509f Normalize the deferred destruction language
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:40:26 -07:00
Richard Laager
0d122e21ff Improve the wording about hot spares
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:39:37 -07:00
Richard Laager
6b92390fe8 Improve some quoting consistency
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:38:56 -07:00
Richard Laager
577468215b Remove a stray tab
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:38:27 -07:00
Richard Laager
25d4782bac Linux has "partitions", not "slices"
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:38:04 -07:00
Richard Laager
54e5f2264d Use Linux disk names in zpool.8
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:37:31 -07:00
Richard Laager
1dc3fea59e More and correct an example in zpool.8
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:36:17 -07:00
Richard Laager
1fe2e23771 Change /dev/dsk -> /dev in the man pages
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:35:21 -07:00
Richard Laager
2d1b7b0b97 Correct man page section numbers for Linux
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-04-19 11:33:51 -07:00
Brian Behlendorf
bdf4328b04 Linux 2.6.28 compat, insert_inode_locked()
Added insert_inode_locked() helper function, prior to this most callers
used insert_inode_hash().  The older method doesn't check for collisions
in the inode_hashtable but it still acceptible for use.  Fallback to
using insert_inode_hash() when insert_inode_locked() is unavailable.
2011-03-22 12:15:54 -07:00
Brian Behlendorf
01c0e61da0 Add init scripts
To support automatically mounting your zfs on filesystem on boot
a basic init script is needed.  Unfortunately, every distribution
has their own idea of the _right_ way to do things.  Rather than
write one very complicated portable init script, which would be
invariably replaced by the distributions own anyway.  I have
instead added support to provide multiple distribution specific
init scripts.

The correct init script for your distribution will be selected
by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT.
During 'make install' the correct script for your system will
be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the
usual /etc/init.d/zfs location.

Currently, there is zfs.fedora and a more generic zfs.lsb init
script.  Hopefully, the distribution maintainers who know best
how they want their init scripts to function will feedback their
approved versions to be included in the project.

This change does not consider upstart jobs but I'm not at all
opposed to add that sort of thing.
2011-03-17 16:51:54 -07:00
Brian Behlendorf
45066d1f20 Linux 2.6.38 compat, blkdev_get_by_path()
The open_bdev_exclusive() function has been replaced (again) by the
more generic blkdev_get_by_path() function.  Additionally, the
counterpart function close_bdev_exclusive() has been replaced by
blkdev_put().  Because these functions are more generic versions
of the functions they replaced the compatibility macro must add
the FMODE_EXCL mask to ensure they are exclusive.

Closes #114
2011-02-23 12:29:38 -08:00
Brian Behlendorf
2c395def27 Linux 2.6.36 compat, sops->evict_inode()
The new prefered inteface for evicting an inode from the inode cache
is the ->evict_inode() callback.  It replaces both the ->delete_inode()
and ->clear_inode() callbacks which were previously used for this.
2011-02-11 13:47:51 -08:00
Brian Behlendorf
7268e1bec8 Linux 2.6.35 compat, fops->fsync()
The fsync() callback in the file_operations structure used to take
3 arguments.  The callback now only takes 2 arguments because the
dentry argument was determined to be unused by all consumers.  To
handle this a compatibility prototype was added to ensure the right
prototype is used.  Our implementation never used the dentry argument
either so it's just a matter of using the right prototype.
2011-02-11 09:05:51 -08:00
Brian Behlendorf
777d4af891 Linux 2.6.35 compat, const struct xattr_handler
The const keyword was added to the 'struct xattr_handler' in the
generic Linux super_block structure.  To handle this we define an
appropriate xattr_handler_t typedef which can be used.  This was
the preferred solution because it keeps the code clean and readable.
2011-02-10 16:29:00 -08:00
Brian Behlendorf
9a616b5d17 Documentation updates
Minor Linux specific documentation updates to the comments and
man pages.
2011-02-04 16:14:34 -08:00
Brian Behlendorf
c5d915f423 Minimal libshare infrastructure
ZFS even under Solaris does not strictly require libshare to be
available.  The current implementation attempts to dlopen() the
library to access the needed symbols.  If this fails libshare
support is simply disabled.

This means that on Linux we only need the most minimal libshare
implementation.  In fact just enough to prevent the build from
failing.  Longer term we can decide if we want to implement a
libshare library like Solaris.  At best this would be an abstraction
layer between ZFS and NFS/SMB.  Alternately, we can drop libshare
entirely and directly integrate ZFS with Linux's NFS/SMB.

Finally the bare bones user-libshare.m4 test was dropped.  If we
do decide to implement libshare at some point it will surely be
as part of this package so the check is not needed.
2011-02-04 16:14:29 -08:00
Brian Behlendorf
b3259b6a2b Autoconf selinux support
If libselinux is detected on your system at configure time link
against it.  This allows us to use a library call to detect if
selinux is enabled and if it is to pass the mount option:

  "context=\"system_u:object_r:file_t:s0"

For now this is required because none of the existing selinux
policies are aware of the zfs filesystem type.  Because of this
they do not properly enable xattr based labeling even though
zfs supports all of the required hooks.

Until distro's add zfs as a known xattr friendly fs type we
must use mntpoint labeling.  Alternately, end users could modify
their existing selinux policy with a little guidance.
2011-01-28 12:45:19 -08:00
Brian Behlendorf
2959d94a0a Add FAILFAST support
ZFS works best when it is notified as soon as possible when a device
failure occurs.  This allows it to immediately start any recovery
actions which may be needed.  In theory Linux supports a flag which
can be set on bio's called FAILFAST which provides this quick
notification by disabling the retry logic in the lower scsi layers.

That's the theory at least.  In practice is turns out that while the
flag exists you oddly have to set it with the BIO_RW_AHEAD flag.
And even when it's set it you may get retries in the low level
drivers decides that's the right behavior, or if you don't get the
right error codes reported to the scsi midlayer.

Unfortunately, without additional kernels patchs there's not much
which can be done to improve this.  Basically, this just means that
it may take 2-3 minutes before a ZFS is notified properly that a
device has failed.  This can be improved and I suspect I'll be
submitting patches upstream to handle this.
2010-10-12 14:55:02 -07:00
Brian Behlendorf
6283f55ea1 Support custom build directories and move includes
One of the neat tricks an autoconf style project is capable of
is allow configurion/building in a directory other than the
source directory.  The major advantage to this is that you can
build the project various different ways while making changes
in a single source tree.

For example, this project is designed to work on various different
Linux distributions each of which work slightly differently.  This
means that changes need to verified on each of those supported
distributions perferably before the change is committed to the
public git repo.

Using nfs and custom build directories makes this much easier.
I now have a single source tree in nfs mounted on several different
systems each running a supported distribution.  When I make a
change to the source base I suspect may break things I can
concurrently build from the same source on all the systems each
in their own subdirectory.

wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz
tar -xzf zfs-x.y.z.tar.gz
cd zfs-x-y-z

------------------------- run concurrently ----------------------
<ubuntu system>  <fedora system>  <debian system>  <rhel6 system>
mkdir ubuntu     mkdir fedora     mkdir debian     mkdir rhel6
cd ubuntu        cd fedora        cd debian        cd rhel6
../configure     ../configure     ../configure     ../configure
make             make             make             make
make check       make check       make check       make check

This change also moves many of the include headers from individual
incude/sys directories under the modules directory in to a single
top level include directory.  This has the advantage of making
the build rules cleaner and logically it makes a bit more sense.
2010-09-08 12:38:56 -07:00
Brian Behlendorf
e70e591c51 Add initial autoconf products
Add the initial products from autogen.sh.  These products will
be updated incrementally after this point as development occurs.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-31 13:42:02 -07:00
Brian Behlendorf
c9c0d073da Add build system
Add autoconf style build infrastructure to the ZFS tree.  This
includes autogen.sh, configure.ac, m4 macros, some scripts/*,
and makefiles for all the core ZFS components.
2010-08-31 13:41:27 -07:00
Brian Behlendorf
058ac9ba78 Pull in latest man pages as part of update-zfs.sh
The script has been updated to download the latest documentations
packages for Solaris and extract the needed ZFS man pages.  These
will still need a little markup to handle changes between the
Solaris and Linux versions of ZFS.  Howver, they should be pretty
minor I've tried hard to keep the interface the same.

In additional to the script update the zdb, zfs, and zpool man
pages have been added to the repo.
2009-12-11 16:15:33 -08:00