Shared test library functions lack a simple way to ensure proper
cleanup in the event of a failure. The `log_onexit` cleanup pattern
cannot be used in library functions because it uses one global
variable to store the cleanup command.
An example of where this is a serious issue is when a tunable that
artifically stalls kernel progress gets activated and then some check
fails. Unless the caller knows about the tunable and sets it back,
the system will be left in a bad state.
To solve this problem, turn the global cleanup variable into a stack.
Provide push and pop functions to add additional cleanup steps and
remove them after it is safe again.
The first use of this new functionality is in attempt_during_removal,
which sets REMOVAL_SUSPEND_PROGRESS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10080
This function should only return "linux" on Linux.
Move the kernel part of the function out of common code.
Fix the tests for FreeBSD.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10079
All other ksh scripts use /bin/ksh in the shebang.
Make rsend_016_neg consistent with the rest of the suite.
The test also was absent from any runfiles. Add it to common.run.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10051
Use file vdevs if we are short on $DISKS.
Also fixed vol recursion for FreeBSD in 004.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10060
* Set geom debug flags in corrupt_blocks_at_level
* Use the right time zone for history tests
* Add missing commands.cfg entry for diskinfo
* Rewrite get_last_txg_synced to use zdb
* Don't check ulimits for sparse files
* Suspend removal before removing a vdev, not after
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10054
`zfs recv` of an incremental stream that already exists is ignored, with
a message like:
receiving incremental stream of pool/fs@incsnap into pool/fs@incsnap
snap testpool/testfs@incsnap already exists; ignoring
And the command exits successfully (exit code 0).
The zfs_receive_004_neg test is expecting that a this case will fail,
with nonzero exit code.
The fix is to remove this specific command from the test case. This
lets us check that the remaining commands do in fact fail.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10055
The function `get_used_prop` does not exist.
Use `get_prop used` instead.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10059
Several casenorm tests pass on FreeBSD but are expected to fail on
Linux.
Move the passing tests from "fail" to "maybe" so that passing on
FreeBSD is not unexpected.
Invert platform logic so FreeBSD doesn't use illumos-only zlook.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10050
* Check for mountd in is_shared to avoid timeout when not running
* Enhance robustness of some cleanup functions
* Simplify atime lookup
* Skip sharenfs validation for now
* Don't add mountpoint property to inheritance validation on FreeBSD
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10047
zed_start may be called in places where zed is not
typically already running, but this is not a requirement
of the tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#9974
* Force UFS sync before snap in vol rollback tests
* rw is not a valid share option on FreeBSD, use ro instead
* zfs_unmount_nested: mountpoint is in the pool, rmdir *before* export
* Fix some more platform checks
* Fix disappearing group in delegate tests
* Don't try delegating for jailed, only root can set it
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10038
The zpool destroy tests partition a single disk to create two pools.
This can be done using two disks and no partitioning instead.
And temporarily allow vol recursion for FreeBSD while in here.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10036
FreeBSD doesn't have a `share` command. It does have showmount.
Split the separate platform impls out of is_shared_impl.
Dispatch to the correct platform impl function from is_shared.
Eliminate the use of is_shared_impl from tests. is_shared works.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10037
These tests are unspported on FreeBSD and Linux for lack of pfexec.
Move the privilege tests to sunos.run and remove the platform checks.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10035
These tests use lsblk to find the sector size of a disk.
FreeBSD doesn't have lsblk.
Use diskinfo -v to get sector size on FreeBSD.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>\
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10033
FreeBSD uses `pw` for account management. `userquota_006_pos`
erroneously invokes the non-existent `groupdel` command on FreeBSD.
Use `pw groupdel -n` instead of `groupdel` on FreeBSD.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10032
FreeBSD does not support the "devices" and "nodevices" mount options.
Do not check these options on FreeBSD.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10028
This test is supposed to verify zil operations. For TX_WRITE, writes
must be synchronous in order to be entered in the zil. Linux seems to
be doing sync writes even when they are not asked for, but on FreeBSD
the test does not do what is intended.
Use dd oflag=sync for the parts of this test that are supposed to
result in TX_WRITE zil entries.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10022
These tests can be made to work without a bunch of complex
partitioning of physical disks.
Use the 3 disks directly, creating a few file disks if needed for a
compelling reason.
Reduce the use of shared variables that don't have a clear utility.
Catch the fallout in tests that include cfg/shlib from zpool_create.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10002
For some unknown reason, egrep was misbehaving with this pattern on
FreeBSD. The command works fine run interactively from a shell, but
in the test the output of egrep is empty.
Work around the issue by using a filter in the awk script instead.
While here, add a bit of diagnostic output and other simplifications
to the awk script as well.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10023
FreeBSD doesn't have the -n flag for cmp.
Read the area for the first four labels from the disk to a separate
file to compare instead of using the special flag to limit the size.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10024
FreeBSD does not have the free command. This command is only used by
Linux in a perf hostinfo function.
Move free from the list of common commands to the list of Linux
commands.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10011
We have have made the necessary changes in our module code to expose
zevents through both devd and the zpool events ioctl. Now the tunables
can be exposed and zpool events tests can be enabled on both platforms.
A few minor tweaks to the tests were needed to accommodate the way wc
formats output on FreeBSD.
zed remains to be ported.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10008
Moving forward, we wish to use org.openzfs (no dash) rather than
org.open-zfs or org.zfsonlinux for feature GUIDs and property names.
The existing feature GUIDs cannot be changed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#10003
The cksum command is used by delegate tests. We have it on FreeBSD,
so it should not have been moved to the Linux commands list.
Move it back to the common commands list.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10007
This adds support for setting user properties in a
zfs channel program by adding 'zfs.sync.set_prop'
and 'zfs.check.set_prop' to the ZFS LUA API.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Co-authored-by: Sara Hartse <sara.hartse@delphix.com>
Contributions-by: Jason King <jason.king@joyent.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Jason King <jason.king@joyent.com>
Closes#9950
Add missing logic for FreeBSD to a few test scripts.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9994
The zpool_add tests include zpool_create.shlib for a few silly
variables.
Don't use those variables for the file names. Include zpool_add.kshlib
for whatever variables we still need.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9997
These tests do not need to use partitions.
Get rid of the partitioning and just use the disks directly.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9996
These tests do not need to use partitions.
Get rid of the partitioning and just use the disks directly.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9995
Cleanup functions should make a best effort to clean up as much as
possible.
Do a consistency pass in a bunch of tests to make the cleanup
functions less prone to failure and fix a few typos here and there.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9993
Linux defines ECKSUM as EBADE, FreeBSD defines it as EINTEGRITY.
Test for ECKSUM instead of EBADE so we don't have to define EBADE for
this test on FreeBSD.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9992
This was missed in review. On FreeBSD, script does not understand
environment variables being passed as a command.
Use env to make faketty handle env vars on FreeBSD.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9981
Missed this in the review, but wc output on FreeBSD is indented,
so string comparisons mismatch when comparing to an unindented number.
Compare counts as integers instead of strings.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9980
Add support for bookmark creation and cloning.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#9571
This feature allows copying existing bookmarks using
zfs bookmark fs#target fs#newbookmark
There are some niche use cases for such functionality,
e.g. when using bookmarks as markers for replication progress.
Copying redaction bookmarks produces a normal bookmark that
cannot be used for redacted send (we are not duplicating
the redaction object).
ZCP support for bookmarking (both creation and copying) will be
implemented in a separate patch based on this work.
Overview:
- Terminology:
- source = existing snapshot or bookmark
- new/bmark = new bookmark
- Implement bookmark copying in `dsl_bookmark.c`
- create new bookmark node
- copy source's `zbn_phys` to new's `zbn_phys`
- zero-out redaction object id in copy
- Extend existing bookmark ioctl nvlist schema to accept
bookmarks as sources
- => `dsl_bookmark_create_nvl_validate` is authoritative
- use `dsl_dataset_is_before` check for both snapshot
and bookmark sources
- Adjust CLI
- refactor shortname expansion logic in `zfs_do_bookmark`
- Update man pages
- warn about redaction bookmark handling
- Add test cases
- CLI
- pyyzfs libzfs_core bindings
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#9571
zdb -R :b fails due to the indirect block being compressed,
and the 'b' and 'd' flag not working in tandem when specified.
Fix the flag parsing code and create a zfs test for zdb -R
block display. Also fix the zio flags where the dotted notation
for the vdev portion of DVA (i.e. 0.0:offset:length) fails.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#9640Closes#9729
Not all systems / distros have a `/bin/bash`, and these scripts are
more difficult to run at development time.
For example, my system is NixOS which doesn't have a /bin/bash. This
is not a problem for NixOS building ZFS as a package: the build
environment automatically replaces these shebangs with corrected
paths.
The problem is much more annoying at development time: either the
scripts don't run, or I correct them for my local machine and deal with
a perpetually dirty work tree.
Before committing this patch I confirmed there are existing scripts
which use `/usr/bin/env` to locate bash, so I am thinking this is a
safe transformation.
There are a handful of other shebangs in this repository which don't
work on my system. This patch is useful on its own specifically for
`commitcheck.sh`, otherwise I can't validate my commits before
submission.
Here are the remaining shebangs which NixOS systems won't have:
1274 #!/bin/ksh -p
91 #!/bin/ksh
89 #! /bin/ksh -p
2 #!/bin/sed -f
1 #!/usr/bin/perl -w
1 #!/usr/bin/ksh
1 #!/bin/nawk -f
plus this which will create an invalid shebang in
`tests/zfs-tests/tests/functional/mv_files/mv_files_common.kshlib`:
echo "#!/bin/ksh" > $TEST_BASE_DIR/exitsZero.ksh
I chose to leave those alone for now, and gauge the interest in this
much smaller patch first.
The fixes for these are easy enough by simply using `/usr/bin/env ksh`:
91 #!/bin/ksh
1 #!/usr/bin/ksh
The fix for the other set is much trickier. Quoting the GNU coreutils
manual:
Most operating systems (e.g. GNU/Linux, BSDs) treat all text after
the first space as a single argument. When using env in a script it
is thus not possible to specify multiple arguments.
and not all `env`'s support arguments.
Mine (GNU Coreutils 8.31) does, though this feature is new since
April 2018, GNU Coreutils 8.30:
https://git.savannah.gnu.org/cgit/coreutils.git/commit/?id=668306ed86c8c79b0af0db8b9c882654ebb66db2
and worse, requires the -S argument:
-S, --split-string=S process and split S into separate arguments;
used to pass multiple arguments on shebang
lines
Example:
$ seq 1 2 | $(nix-build '<nixpkgs>' -A coreutils)/bin/env "sort -nr"
/nix/[...]-coreutils-8.31/bin/env: ‘sort -nr’: No such file or directory
/nix/[...]-coreutils-8.31/bin/env: use -[v]S to pass options in shebang lines
$ seq 1 2 | $(nix-build '<nixpkgs>' -A coreutils)/bin/env "-S sort -nr"
2
1
GNU Coreutils says FreeBSD's `env` does, though I wonder if FreeBSD's
would be unhappy with the `-S`:
https://www.gnu.org/software/coreutils/manual/html_node/env-invocation.html#env-invocation
BusyBox v1.30.1 does not, and does not have a `-S`-like option:
$ seq 1 2 | $(nix-build '<nixpkgs>' -A busybox)/bin/env "sort -nr"
env: can't execute 'sort -nr': No such file or directory
Toybox 0.8.1 also does not, and also does not have a `-S` option:
$ seq 1 2 | $(nix-build '<nixpkgs>' -A toybox)/bin/env "sort -nr"
env: exec sort -nr: No such file or directory
---
At any rate, if this patch merges and the remaining ~1,500 are updated,
the much larger patch should probably include a checkstyle-like test
asserting all new shebangs use `/usr/bin/env`. I also don't mind
dealing with NixOS weirdness if the project would prefer that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Graham Christensen <graham@grahamc.com>
Closes#9893
We found that our zvol code had some issues with volmode=dev that were
not revealed by ZTS.
Add some basic I/O operations to exercise more code paths in the
volmode test.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9953
Currently SIMD accelerated AES-GCM performance is limited by two
factors:
a. The need to disable preemption and interrupts and save the FPU
state before using it and to do the reverse when done. Due to the
way the code is organized (see (b) below) we have to pay this price
twice for each 16 byte GCM block processed.
b. Most processing is done in C, operating on single GCM blocks.
The use of SIMD instructions is limited to the AES encryption of the
counter block (AES-NI) and the Galois multiplication (PCLMULQDQ).
This leads to the FPU not being fully utilized for crypto
operations.
To solve (a) we do crypto processing in larger chunks while owning
the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced
to make this chunk size tweakable. It defaults to 32 KiB. This step
alone roughly doubles performance. (b) is tackled by porting and
using the highly optimized openssl AES-GCM assembler routines, which
do all the processing (CTR, AES, GMULT) in a single routine. Both
steps together result in up to 32x reduction of the time spend in
the en/decryption routines, leading up to approximately 12x
throughput increase for large (128 KiB) blocks.
Lastly, this commit changes the default encryption algorithm from
AES-CCM to AES-GCM when setting the `encryption=on` property.
Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-By: Jason King <jason.king@joyent.com>
Reviewed-By: Tom Caputi <tcaputi@datto.com>
Reviewed-By: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#9749
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Igor Kozhukhov <igor@dilos.org>
Closes#9960
FreeBSD does not have the long opts for wc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9963
And while here, add a workaround for FreeBSD to ensure dirty data is
synced before taking a snapshot, by remounting read-only, then remount
again read-write after the snapshot.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9914
FreeBSD has jails, not zones.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9899
Linux was missing a default value for DEV_DSKDIR. Set it to /dev.
Fix resulting fallout.
SLICE_PREFIX seems like a good candidate for including in the defaults.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9898
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9907
We can avoid a great deal of `sleep 3` by simply destroying the whole
partition table in one shot with gpart.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9908
FreeBSD doesn't support feature@edonr.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9901
Both GNU and FreeBSD sort have -R to randomize input.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9900
