musl's sys/errno.h is literally:
/#warning redirecting incorrect #include <sys/errno.h> to <errno.h>
/#include <errno.h>
It does the same for sys/{poll,signal}.h. This is rather noisy when
building ZoL against musl. musl is also correct in pointing out that the
correct headers are outside of sys/ according to the single unix
specification:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/errno.h.htmlhttp://pubs.opengroup.org/onlinepubs/7908799/xsh/poll.h.htmlhttp://pubs.opengroup.org/onlinepubs/7908799/xsh/signal.h.html
Lets implement our own sys/* versions of these headers to redirect to
the proper userland ones when building in userspace. That will silence
the warning.
There are also some instances where we include incorrectly from sys/ or
from outside of sys/ in userspace only code. In these instances, lets
just fix the includes directly.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#5993
When building on Gentoo against musl, GCC complains:
timestamp.c: In function ‘print_timestamp’:
timestamp.c:32:19: warning: passing argument 1 of ‘nl_langinfo’ makes
integer from pointer without a cast
#define _DATE_FMT "%+"
^
timestamp.c:47:21: note: in expansion of macro ‘_DATE_FMT’
fmt = nl_langinfo(_DATE_FMT);
^
The error was wrapped to meet comment style requirements.
This code is used by `zpool iostat -T d 1` to print a date and upon
testing it, I see no date printed. Lets use D_T_FMT so that something
gets printed and if D_T_FMT is not avaliable, then we can fall back to
"%+".
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#5993
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Updated 'zpool labelclear' and 'zdb -l' such that they attempt
to find a vdev given solely its short name. This behavior is
consistent with the upstream OpenZFS code and the test cases
depend on it. The actual implementation differs slightly due
to device naming conventions on Linux.
- auto_online_001_pos, auto_replace_001_pos and add-o_ashift
test cases updated to expect failure when no label exists.
- read_efi_label() and zpool_label_disk_check() are read-only
operations and should use O_RDONLY at open time to enforce this.
- zpool_label_disk() and zpool_relabel_disk() write the partition
information using O_DIRECT an fsync() and page cache invalidation
to ensure a consistent view of the device.
- dump_label() in zdb should invalidate the page cache in order
to get the authoritative label from disk.
OpenZFS-issue: https://www.illumos.org/issues/6865
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c95076cCloses#5981
Authored by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
recv_incremental_replication() takes care of things like removing
datasets that have been removed on the sending side, detecting renamed
datasets, ensuring that all datasets in the affected hierarchy have the
same properties as their counterparts on the sending side.
All of the above are not necessary if we are receiving a stream for a
single dataset that has been generated with zfs send -p, that is, a
stream that includes properties. zfs_receive_one() already takes care
of applying the properties to the received datasets.
OpenZFS-issue: https://www.illumos.org/issues/5380
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b8ab927Closes#5990
Authored by: Pedro Giffuni <pfg@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8046
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3a3c0d5Closes#5989
In glibc 2.5, makedev(), major(), and minor() are defined in
sys/sysmacros.h. They are also defined in types.h for backward
compatability, but using these definitions triggers a compile warning.
This breaks the ZFS build, as it builds with -Werror.
autoconf email threads indicate these macros may be defined in
sys/mkdev.h in some cases.
This commit adds configure checks to detect where makedev() is defined:
sys/sysmacros.h
sys/mkdev.h
It assumes major() and minor() are defined in the same place.
The libspl types.h then includes
sys/sysmacros.h (preferred) or
sys/mkdev.h (2nd choice)
if one of those defines makedev().
This is done before including the system types.h.
An alternative would be to remove uses of major, minor, and makedev,
instead comparing the st_dev returned from stat64. These configure
checks would then be unnecessary.
This change revealed that __NORETURN was being defined unnecessarily in
libspl/include/sys/sysmacros.h. That definition is removed.
The files in which __NORETURN are used all include types.h, and so all
will get the definition provided by feature_tests.h
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5945
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.
Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5878
Fix a regression accidentally introduced by OpenZFS 7280 in ed828c0: since
whether to accept NULL as a valid first parameter in strchr() is implementation
specific we add an additional check to avoid crashing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5917
Add trivial libzfs_fru_compare() function which can be used when
HAVE_LIBTOPO is not defined. The only caller is find_vdev() and
this function should never be reached because search_fru must be
NULL unless HAVE_LIBTOPO is defined.
Rename _HAS_FMD_TOPO to existing HAVE_LIBTOPO which was
originally added for this purpose. This macro will never be defined.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5402Closes#5909
When a pool is suspended it's impossible to read the list
of damaged files from disk. This would result in a generic
misleading "insufficient permissions" error message.
Update zpool_get_errlog() to use the standard zpool error
logging functions to generate a useful error message. In
this case:
errors: List of errors unavailable: pool I/O is currently suspended
This patch does not address the related issue of potentially
not being able to resume a suspend pool when the underlying
device names have changed.
Additionally, remove the error handling from zfs_alloc()
in zpool_get_errlog() for readability since this function
can never fail.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4031Closes#5731Closes#5907
libspl tries to detect sparc64 by checking whether __sparc64__
is defined. Unfortunately, this assumption is not correct as
sparc64 does not define __sparc64__ but it defines __sparc__
and __arch64__ instead. This leads to sparc64 being detected
as 32-Bit sparc and the build fails because both _ILP32 and
_LP64 are defined in this case.
To fix the problem, remove the checks for __sparc64__ and
just check __arch64__ if a sparc host was previously
detected with __sparc__.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Closes#5913
The current implementation for allowing nfs to access snapdir is very buggy.
It uses a special fh for snapdirs, such that the next time nfsd does
fh_to_dentry, it actually returns the root inode inside the snapshot. So nfsd
never knows it cross a mountpoint.
The problem is that nfsd will not hold a reference on the vfsmount of the
snapshot. This cause auto unmounter to unmount the snapshot even though nfs is
still holding dentries in it.
To fix this, we return the inode for the snapdirs themselves. However, we also
trigger automount upon fh_to_dentry, and return ESTALE so nfsd will revalidate
and see the mountpoint and do crossmnt.
Because nfsd will now be aware that these are different filesystems users
must add crossmnt to their export options to access snapshot directories.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3794Closes#4716Closes#5810Closes#5833
Unlike other architectures which sanitize the LDFLAGS from the
environment in arch/<arch>/Makefile. The powerpc Makefile
allows LDFLAGS to be passed through resulting in the following
build failure.
/usr/bin/ld: unrecognized option '-Wl,-z,relro'
LDFLAGS is set in /usr/lib/rpm/redhat/macros by default. Clear
the environment variable when building kmods for powerpc.
Additionally, now that ppc64le exists it's not longer safe to
assume a powerpc system is big endian. Rely on the endianness
provided by the compiler.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5856
drr_checksumflags was incorrectly set to drr_checksumtype.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tim Crawford <tcrawford@datto.com>
Closes#5830
This clears vdev_enc_sysfs_path from the label if the VDEV's
/sys/class/block/<dev>/device/enclosure_device path isn't present.
This is important in the case where a disk that is labeled with
vdev_enc_sysfs_path is pulled out and put into another enclosure.
In that case, it's possible that the old sysfs path would be used to
turn on the fault LED for the disk's old slot postion, assuming the
new slot didn't have a LED sysfs entry.
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#5524Closes#5773
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7247
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ad25b4Closes#5689
Porting notes:
- tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_013_pos.ksh
renamed as zfs_receive_015_pos.ksh, zfs_receive_013_pos.ksh is now
used for OpenZFS test.
- libzfs_sendrecv.c: SMALLEST_POSSIBLE_MAX_DDT_MB is always used
for all 32-bit builds.
The atomic_sub_64() should use sbbl instead of adcl. In user
space these atomics are used for statistics tracking and aren't
critical which explain how this was overlooked. The kernel
space implementation of these atomics are layered on the
architecture specific implementations provided by the kernel.
Reviewed by: Stefan Ring <stefanrin@gmail.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5671Closes#5717
The problem is that consumers of `libZFS_Core` that forget to call
`libzfs_core_init()` before calling any other function of the library
are having a hard time realizing their mistake. The library's internal
file descriptor is declared as global static, which is ok, but it is not
initialized explicitly; therefore, it defaults to 0, which is a valid
file descriptor. If `libzfs_core_init()`, which explicitly initializes
the correct fd, is skipped, the ioctl functions return errors that do
not have anything to do with `libZFS_Core`, where the problem is
actually located.
Even though assertions for that existed within `libZFS_Core` for debug
builds, they were never enabled because the `-DDEBUG` flag was missing
from the compiler flags.
This patch applies the following changes:
1. It adds `-DDEBUG` for debug builds of `libZFS_Core` and `libzfs`,
to enable their assertions on debug builds.
2. It corrects an assertion within `libzfs`, where a function had
been spelled incorrectly (`zpool_prop_unsupported()`) and nobody
knew because the `-DDEBUG` flag was missing, and the preprocessor
was taking that part of the code away.
3. The library's internal fd is initialized to `-1` and `VERIFY`
assertions have been placed to check that the fd is not equal to
`-1` before issuing any ioctl. It is important here to note, that
the `VERIFY` assertions exist in both debug and non-debug builds.
4. In `libzfs_core_fini` we make sure to never increment the
refcount of our fd below 0, and also reset the fd to `-1` when no
one refers to it. The reason for this, is for the rare case that
the consumer closes all references but then calls one of the
library's functions without using `libzfs_core_init()` first, and
in the mean time, a previous call to `open()` decided to reuse
our previous fd. This scenario would have passed our assertion in
non-debug builds.
5. Once the `ASSERTION` macros were enabled again, two tests from
the test suite were failing in `libzfs_sendrecv.c` at a
`ZIO_CHECKSUM_IS_ZERO` check within `dump_record()`. We now zero
the kernel filled checksums in all `dmu_replay_record`s that we
read in `cksummer()`, except the ones that are of type
`DRR_BEGIN`.
I considered making all assertions available for both debug and
non-debug builds, but I figured that it would not be appropriate if, for
example, an outside consumer of `libZFS_Core` suddenly triggers an
assertion failure because they happened to call `libzfs_core_fini()`,
even if previously the reference counter was `0`. Therefore, all the
reference counter related assertions are only enabled for debug builds,
and fd related assertions are enabled for debug and non-debug builds.
Porting notes:
- `ASSERT3S(g_refcount, >, 0);` added to `recv_impl` in
lib/libzfs_core/libzfs_core.c .
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7745
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7e3139aCloses#5698
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
The refresh_config() calls into the kernel with ZFS_IOC_POOL_TRYIMPORT.
This ioctl returns the config of the pool in a buffer pre-allocated in
userland. The original estimate for the size is too conservative since
it doesn't account for the large size of vdev stats that are added to
the config before returning.
This fix simply increases the size of the buffer passed. This results in
a speed up of the zpool import process, and less spam in zfs_dbgmsg.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7541
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a3c7690Closes#5704
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7340
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed4e7a6Closes#5681
Correctly handle the unlikely case where the memory buffer cannot be resized.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#5575
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: - George Wilson <george.wilson@delphix.com>
Reviewed by: - Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: - Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: - Albert Lee <trisk@omniti.com>
Approved by: - Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/5142
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d5f26adCloses#5663
Porting notes:
- statvfs64 is replaced by statfs64.
- ZFS_SUPER_MAGIC definition moved in include/sys/fs/zfs.h
to share it between user and kernel space.
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7336
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dd862f6dCloses#5651
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7571
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ad2760aCloses#5638
Porting notes:
- Several direct callers of zk_thread_create() are passing TS_RUN for the
length. The `len` and `state` were inverted,this commit fixes them.
Authored by: Eli Rosenthal <eli.rosenthal@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov mail@gmelikov.ru
OpenZFS-issue: https://www.illumos.org/issues/6871
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8fc9228Closes#5621
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7604
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/586fd65Closes#5629
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6428
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c079fa4Closes#5628
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5547Closes#5543
Enable picky cstyle checks and resolve the new warnings. The vast
majority of the changes needed were to handle minor issues with
whitespace formatting. This patch contains no functional changes.
Non-whitespace changes are as follows:
* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5465
Speed up import and export speed by:
* Add system delay taskq
* Parallel prefetch zvol dnodes during zvol_create_minors
* Parallel zvol_free during zvol_remove_minors
* Reduce list linear search using ida and hash
Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5433
Use it for spa_deadman, zpl_posix_acl_free, snapentry_expire.
This free system_taskq from the above long delay tasks, and allow us to do
taskq_wait_outstanding on system_taskq without being blocked forever, making
system_taskq more generic and useful.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
* Convert ABD to use the Linux Kernel scatterlist implementation
instead of the hand rolled one from illumos.
* Scatter ABDs are preferentially populated with higher order
compound pages from a single zone. Allocation size is
progressively decreased until it can be satisfied without
performing reclaim or compaction.
* An alternate page allocator is provided for kernels older
than 3.6 and for CONFIG_HIGHMEM systems. This allocator
is designed as a fallback for maximum compatibility.
* Extended abdstats to provide visibility in the the allocator.
* Add cached value for PAGESIZE in userspace.
Contributions-by:
Chunwei Chen <david.chen@osnexus.com>
Gvozden Neskovic <neskovic@gmail.com>
Jinshan Xiong <jinshan.xiong@intel.com>
Isaac Huang <he.huang@intel.com>
David Quigley <david.quigley@intel.com>
Brian Behlendorf <behlendorf1@llnl.gov>
This patch adds a command (-c) option to zpool status and zpool iostat. The
-c option allows you to run an arbitrary command on each vdev and display
the first line of output in zpool status/iostat. The environment vars
VDEV_PATH and VDEV_UPATH are set to the vdev's path and "underlying path"
before running the command. For device mapper, multipath, or partitioned
vdevs, VDEV_UPATH is the actual underlying /dev/sd* disk. This can be useful
if the command you're running requires a /dev/sd* device.
The patch also uses /sys/block/<dev>/slaves/ to lookup the underlying device
instead of using libdevmapper. This not only removes the libdevmapper
requirement at build time, but also allows you to resolve device mapper
devices without being root. This means that UDEV_UPATH get set correctly
when running zpool status/iostat as an unprivileged user.
Example:
$ zpool status -c 'echo I am $VDEV_PATH, $VDEV_UPATH'
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
mpatha ONLINE 0 0 0 I am /dev/mapper/mpatha, /dev/sdc
sdb ONLINE 0 0 0 I am /dev/sdb1, /dev/sdb
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#5368
Allow `zfs unshare <protocol> -a` command to share or unshare all datasets
of a given protocol, nfs or smb.
Additionally, enable most of ZFS Test Suite zfs_share/zfs_unshare test cases.
To work around some Illumos-specific functionalities ($SHARE/$UNSHARE) some
function wrappers were added around them.
Finally, fix and issue in smb_is_share_active() that would leave SMB shares
exported when invoking 'zfs unshare -a'
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#3238Closes#5367
Before adding the entry to the configuration verify that the
device can be opened exclusively. This ensures that as long
as multipathd is running the underlying multipath devices, which
otherwise appear identical to their /dev/mapper counterpart,
are pruned from the configuration.
Failure to do so can result in a result in the vdev appearing
as UNAVAIL when the vdev path provided to the kernel can't be
opened exclusively.
This check would normally be performed in zpool_open_func()
but placing it there would result in false positives because
it is called concurrently for many devices.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5387
This patch addresses multiple 'zpool import' block device
indentification problems which are most likely to occur on a
system configured to use blkid, by_vdev paths, multipath and
failover. The symptom most commonly observed is the import
uses different path names to import the pool than would
normally be expected.
* When using blkid to identify vdevs the listed devices may
be added to the cache in any order. In order to apply the
preferred search order heuristic a zfs_path_order() function
was added to calculate the order given full path names.
* Since it's possible to have multiple block devices with
different vdev guids which refer to the same ZPOOL_CONFIG_PATH
the slice cache must be indexed by guid and name. By avoiding
collisions the preferred ordering can be maintaining even
when multiple block devices claim the same ZPOOL_CONFIG_PATH.
The preferred sorting by partition was never benefitial for
a Linux system and was removed as part of this change.
* When adding entries to the blkid cache avl_find/avl_insert
are used instead of avl_add because collisions are possible
and must be handled gracefully.
* For pools using multipath devices there are, at a minimum,
three devices where a vdev label may be read. They are the
dm-* device and each underlying /dev/sd* device. Due to the
way the block cache is implemented each of these devices may
have a different cached copy of the vdev label. This can
result in "ghost pools" which appear to persist even after
a 'zpool labelclear' has been done to the dm-* device. In
order to prevent this the vdev label is read with O_DIRECT
in order to bypass any caching to get the on-disk version.
* When opening a block device verify that vdev guid read from
the disk matches the expected vdev guid. This allows for bad
labels to be filtered out.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5359
This is the Fletcher4 algorithm implemented in pure C, but using
multiple counters using algorithms identical to those used for
SSE/NEON and AVX2.
This allows for faster execution on core with strong superscalar
capabilities but weak SIMD capabilities.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#5317
avx512f should work on all AVX512 hardware, since it only uses
Foundation instructions.
avx512bw should be faster on hardware supporting the AVW512BW
extension. We can use full-width pshufb (instead of relying on the 256
bits AVX2 pshufb). As a side-effect, the code is also unrolled more.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.github@dolbeau.name>
Closes#5219
Sometimes it is desirable to specifically disable one or several
features directly on the 'zpool create' command line.
$ zpool create -o feature@<feature>=disabled ...
Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#3460Closes#5142Closes#5324
Previously when a drive faulted, the statechange-led.sh script would lookup
the drive's LED sysfs entry in /sys/block/sd*/device/enclosure_device, and
turn it on. During testing we noticed that if you pulled out a drive, or if
the drive was so badly broken that it no longer appeared to Linux, that the
/sys/block/sd* path would be removed, and the script could not lookup the
LED entry.
To fix this, this patch looks up the disks's more persistent
"/sys/class/enclosure/X:X:X:X/Slot N" LED sysfs path at pool import. It then
passes that path to the statechange-led script to use, rather than having the
script look it up on the fly. This allows the script to turn on/off the slot
LEDs even when the drive is missing.
Closes#5309Closes#2375
This is not useful on micro-architecture with a weak NEON
implementation (only 64 bits); the native version is slower &
the byteswap barely faster than scalar. On A53 or A57, it's
a small improvement on scalar but OK for byteswap.
Results from an A53 system:
0 0 0x01 -1 0 1499068294333000 1499101101878000
implementation native byteswap
scalar 1008227510 755880264
aarch64_neon 1198098720 1044818671
fastest aarch64_neon aarch64_neon
Results from a A57 system:
0 0 0x01 -1 0 4407214734807033 4407233933777404
implementation native byteswap
scalar 2302071241 1124873346
aarch64_neon 2542214946 2245570352
fastest aarch64_neon aarch64_neon
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#5248
1. Enable multipath autoreplace support for FMA.
This extends FMA autoreplace to work with multipath disks. This
requires libdevmapper to be installed at build time.
2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online
Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure
LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must
be supported by the Linux SES driver for this to work. The enclosure LED
scripts work for multipath devices as well. The scripts will clear the LED
when the fault is cleared.
3. Rate limit ZIO delay and checksum events so as not to flood ZED
ZIO delay and checksum events are rate limited to 5/sec in the zfs module.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#2449Closes#3017Closes#5159
coverity scan CID:147654,type: Copy into fixed size buffer
- string operation may write past the end of the fixed-size
destination buffer
coverity scan CID:147690,type: Uninitialized scalar variable
- call zfs_prop_get first in case we use sourcetype and
share_sourcetype without initialization
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5253
coverity scan CID:147452, Type:Unchecked return value from library
coverity scan CID:147447, Type:Unchecked return value from library
coverity scan CID:147446, Type:Unchecked return value from library
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5264
When the exception branch exits, the buf is leaked.
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5262
The following new test cases need to have execute permissions set:
userquota/groupspace_003_pos.ksh
userquota/userquota_013_pos.ksh
userquota/userspace_003_pos.ksh
upgrade/upgrade_userobj_001_pos.ksh
upgrade/setup.ksh
upgrade/cleanup.ksh
The following source files accidentally were marked executable:
lib/libzpool/kernel.c
lib/libshare/nfs.c
lib/libzfs/libzfs_dataset.c
lib/libzfs/libzfs_util.c
tests/zfs-tests/cmd/rm_lnkcnt_zero_file/rm_lnkcnt_zero_file.c
tests/zfs-tests/cmd/dir_rd_update/dir_rd_update.c
cmd/zed/zed_exec.c
module/icp/core/kcf_sched.c
module/zfs/dsl_pool.c
module/zfs/arc.c
module/nvpair/nvpair.c
man/man5/zfs-module-parameters.5
Reviewed-by: GeLiXin <ge.lixin@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5241
Fixes ABI issues with fletcher4 code, adds support for
incremental updates, and adds ztest method for testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5164
The variable snapprops_nvlist was never initialized, so properties
were not applied to the received snapshot.
Additionally, add zfs_receive_013_pos.ksh script to ZFS test suite to exercise
'zfs receive' functionality for user properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#4338
This patch tracks dnode usage for each user/group in the
DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode
accounting have the key prefixed with "obj-" followed by the UID/GID
in string format (as done for the block accounting).
A new SPA feature has been added for dnode accounting as well as
a new ZPL version. The SPA feature must be enabled in the pool
before upgrading the zfs filesystem. During the zfs version upgrade,
a "quotacheck" will be executed by marking all dnode as dirty.
ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported by: Tony Hutter <hutter2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/4185
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee
Porting Notes:
This code is ported on top of the Illumos Crypto Framework code:
b5e030c8db
The list of porting changes includes:
- Copied module/icp/include/sha2/sha2.h directly from illumos
- Removed from module/icp/algs/sha2/sha2.c:
#pragma inline(SHA256Init, SHA384Init, SHA512Init)
- Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since
it now takes in an extra parameter.
- Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c
- Added skein & edonr to libicp/Makefile.am
- Added sha512.S. It was generated from sha512-x86_64.pl in Illumos.
- Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument.
- In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section
to not #include the non-existant endian.h.
- In skein_test.c, renane NULL to 0 in "no test vector" array entries to get
around a compiler warning.
- Fixup test files:
- Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>,
- Remove <note.h> and define NOTE() as NOP.
- Define u_longlong_t
- Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p"
- Rename NULL to 0 in "no test vector" array entries to get around a
compiler warning.
- Remove "for isa in $($ISAINFO); do" stuff
- Add/update Makefiles
- Add some userspace headers like stdio.h/stdlib.h in places of
sys/types.h.
- EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules.
- Update scripts/zfs2zol-patch.sed
- include <sys/sha2.h> in sha2_impl.h
- Add sha2.h to include/sys/Makefile.am
- Add skein and edonr dirs to icp Makefile
- Add new checksums to zpool_get.cfg
- Move checksum switch block from zfs_secpolicy_setprop() to
zfs_check_settable()
- Fix -Wuninitialized error in edonr_byteorder.h on PPC
- Fix stack frame size errors on ARM32
- Don't unroll loops in Skein on 32-bit to save stack space
- Add memory barriers in sha2.c on 32-bit to save stack space
- Add filetest_001_pos.ksh checksum sanity test
- Add option to write psudorandom data in file_write utility
All users of fletcher4 methods must call `fletcher_4_init()/_fini()`
There's no benchmarking overhead when called from user-space.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
This re-use the framework established for SSE2, SSSE3 and
AVX2. However, GCC is using FP registers on Aarch64, so
unlike SSE/AVX2 we can't rely on the registers being left alone
between ASM statements. So instead, the NEON code uses
C variables and GCC extended ASM syntax. Note that since
the kernel explicitly disable vector registers, they
have to be locally re-enabled explicitly.
As we use the variable's number to define the symbolic
name, and GCC won't allow duplicate symbolic names,
numbers have to be unique. Even when the code is not
going to be used (e.g. the case for 4 registers when
using the macro with only 2). Only the actually used
variables should be declared, otherwise the build
will fails in debug mode.
This requires the replacement of the XOR(X,X) syntax
by a new ZERO(X) macro, which does the same thing but
without repeating the argument. And perhaps someday
there will be a machine where there is a more efficient
way to zero a register than XOR with itself. This affects
scalar, SSE2, SSSE3 and AVX2 as they need the new macro.
It's possible to write faster implementations (different
scheduling, different unrolling, interleaving NEON and
scalar, ...) for various cores, but this one has the
advantage of fitting in the current state of the code,
and thus is likely easier to review/check/merge.
The only difference between aarch64-neon and aarch64-neonx2
is that aarch64-neonx2 unroll some functions some more.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#4801
The error message in zpool_vdev_remove() said top-level devices
could be removed, but that has never been true.
Reported-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#4506Closes#5213
coverity scan CID:147531,type: Argument cannot be negative
- may copy data with negative size
coverity scan CID:147532,type: resource leaks
- may close a fd which is negative
coverity scan CID:147533,type: resource leaks
- may call pwrite64 with a negative size
coverity scan CID:147535,type: resource leaks
- may call fdopen with a negative fd
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5176
Undefined operation is reported by running ztest (or zloop) compiled with GCC
UndefinedBehaviorSanitizer. Error only happens on top level of dnode indirection
with large enough offset values. Logically, left shift operation would work,
but bit shift semantics in C, and limitation of uint64_t, do not produce desired
result.
Issue #5059, #4883
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Authored by: Alex Deiter <alex.deiter@gmail.com>
Reviewed by: Alex Aizman alex.aizman@nexenta.com
Reviewed by: Alek Pinchuk alek.pinchuk@nexenta.com
Reviewed by: Roman Strashkin roman.strashkin@nexenta.com
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
OpenZFS-issue: https://www.illumos.org/issues/6111
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/4a20c933Closes#5110
Porting notes:
There were changes from upstream due to the following commits:
- zfs send -p send properties only for snapshots that are actually sent
057485504e
- Produce a full snapshot list for zfs send -p
e890dd85a7
- Implement zfs_ioc_recv_new() for OpenZFS 2605
43e52eddb1
- OpenZFS 6314 - buffer overflow in dsl_dataset_name
ZFS_MAXNAMELEN was changed to the now used ZFS_MAX_DATASET_NAME_LEN since
eca7b76001
Assign the copy length to TASKQ_NAMELEN, so if the name length equals
'TASKQ_NAMELEN+1' , the final '\0' of tq->tq_name is preserved.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: candychencan <chen.can2@zte.com.cn>
Closes#5136
Fix misleading error message:
"The /dev/zfs device is missing and must be created.", if /etc/mtab is missing.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Closes#4680Closes#5029
This first phase brings over the ZFS SLM module, zfs_mod.c, to handle
auto operations in response to disk events. Disk event monitoring is
provided from libudev and generates the expected payload schema for
zfs_mod. This work leverages the recently added devid and phys_path
strings in the vdev label.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#4673
Always free mnpt memory on failure in the zfs_unmount() function.
In the zfs_unshare_proto() function mountpoint is a const and
should not be assigned.
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5054
perf: 2.75x faster ddt_entry_compare()
First 256bits of ddt_key_t is a block checksum, which are expected
to be close to random data. Hence, on average, comparison only needs to
look at first few bytes of the keys. To reduce number of conditional
jump instructions, the result is computed as: sign(memcmp(k1, k2)).
Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} ,
which is computed efficiently. Synthetic performance evaluation of
original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R)
CPU E5-2660 v3:
old 6.85789 s
new 2.49089 s
perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare()
Compute the result directly instead of using conditionals
perf: zfs_range_compare()
Speedup between 1.1x - 2.5x, depending on compiler version and
optimization level.
perf: spa_error_entry_compare()
`bcmp()` is not suitable for comparator use. Use `memcmp()` instead.
perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare()
perf: 2.8x faster zil_bp_compare()
perf: 2.8x faster mze_compare()
perf: faster dbuf_compare()
perf: faster compares in spa_misc
perf: 2.8x faster layout_hash_compare()
perf: 2.8x faster space_reftree_compare()
perf: libzfs: faster avl tree comparators
perf: guid_compare()
perf: dsl_deadlist_compare()
perf: perm_set_compare()
perf: 2x faster range_tree_seg_compare()
perf: faster unique_compare()
perf: faster vdev_cache _compare()
perf: faster vdev_uberblock_compare()
perf: faster fuid _compare()
perf: faster zfs_znode_hold_compare()
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Richard Elling <richard.elling@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5033
This fix resolves warnings reported during compiling with different gcc
optimization levels in debug mode,
Test tools:
gcc version 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC)
Linux version: 2.6.32-573.18.1.el6.x86_64, Red Hat Enterprise Linux Server release 6.1 (Santiago)
List of warnings:
CFLAGS=-O1 ./configure --enable-debug ;make
../../module/icp/core/kcf_sched.c: In function ‘kcf_aop_done’:
../../module/icp/core/kcf_sched.c:499: error: ‘fg’ may be used uninitialized in this function
../../module/icp/core/kcf_sched.c:499: note: ‘fg’ was declared here
CFLAGS=-Os ./configure --enable-debug ; make
libzfs_dataset.c: In function ‘zfs_prop_set_list’:
libzfs_dataset.c:1575: error: ‘nvl_len’ may be used uninitialized in this function
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5022
The user space implementation of cv_timedwait_hires() was always passing
a relative time to pthread_cond_timedwait() when an absolute time is
expected. This was accidentally introduced in commit 206971d2.
Replace two magic values with their corresponding preprocessor macro.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#5024
If the loop index i comes to (ZFS_GET_NCOLS - 1), the cbp->cb_columns[i + 1]
actually read the data of cbp->cb_colwidths[0], which means the array
subscript is above array bounds.
Luckily the cbp->cb_colwidths[0] is always 0 and it seems we haven't
looped enough times to exceed the array bounds so far, but it's really
a secluded risk someday.
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5003
- Benchmark memory block is increased to 128kiB to reflect real block sizes more
accurately. Measurements include all three stages needed for checksum generation,
i.e. `init()/compute()/fini()`. The inner loop is repeated multiple times to offset
overhead of time function.
- Fastest implementation selects native and byteswap methods independently in
benchmark. To support this new function pointers `init_byteswap()/fini_byteswap()`
are introduced.
- Implementation mutex lock is replaced by atomic variable.
- To save time, benchmark is not executed in userspace. Instead, highest supported
implementation is used for fastest. Default userspace selector is still 'cycle'.
- `fletcher_4_native/byteswap()` methods use incremental methods to finish
calculation if data size is not multiple of vector stride (currently 64B).
- Added `fletcher_4_native_varsize()` special purpose method for use when buffer size
is not known in advance. The method does not enforce 4B alignment on buffer size, and
will ignore last (size % 4) bytes of the data buffer.
- Benchmark `kstat` is changed to match the one of vdev_raidz. It now shows
throughput for all supported implementations (in B/s), native and byteswap,
as well as the code [fastest] is running.
Example of `fletcher_4_bench` running on `Intel(R) Xeon(R) CPU E5-2660 v3 @ 2.60GHz`:
implementation native byteswap
scalar 4768120823 3426105750
sse2 7947841777 4318964249
ssse3 7951922722 6112191941
avx2 13269714358 11043200912
fastest avx2 avx2
Example of `fletcher_4_bench` running on `Intel(R) Xeon Phi(TM) CPU 7210 @ 1.30GHz`:
implementation native byteswap
scalar 1291115967 1031555336
sse2 2539571138 1280970926
ssse3 2537778746 1080016762
avx2 4950749767 1078493449
avx512f 9581379998 4010029046
fastest avx512f avx512f
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4952
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Dan Fields <dan.fields@nexenta.com>
Reviewed by: Josef Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Signed-off-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/5997
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283
Porting Notes:
In addition to the OpenZFS changes this patch realigns the events
with those found in OpenZFS.
Events which would be logged as sysevents on illumos have been
been mapped to the 'sysevent' class for Linux. In addition, several
subclass names have been changed to match what is used in OpenZFS.
In all cases this means a '.' was changed to an '_' in the subclass.
The scripts provided by ZoL have been updated, however users which
provide scripts for any of the following events will need to rename
them based on the new subclass names.
ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync
ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy
ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid
ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove
ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear
ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check
ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare
ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand
ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start
ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish
ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start
ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish
ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
The indefinite article before nvlist should be "an", not "a".
We have 27 "an nvlist" and 7 "a nvlist" in our comment, they should
stay the same as we are such a strict filesystem.
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4941
This fix resolves warnings reported during compiling of user-space
libraries with different gcc optimization levels.
Tested with gcc versions: 4.9.2 (Debian), and 6.1.1 (Fedora).
The patch enables use of following opt levels: O0, O1, O2, O3, Og, Os, Ofast.
List of warnings:
[GCC 4.9.2 -Os]
libzfs_sendrecv.c:3726:26: error: 'clp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
[GCC 4.9.2 -Og]
fs_fletcher.c:323:26: error: 'idx' may be used uninitialized in this function [-Werror=maybe-uninitialized]
dsl_dataset.c:1290:12: error: 'atp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
[GCC 4.9.2 -Ofast]
u8_textprep.c:1310:9: error: 'tc[3ul]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
u8_textprep.c:177:23: error: 'u8t[0ul]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
dsl_dataset.c:2089:37: error: ‘hds’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
dsl_dataset.c:3216:2: error: ‘ds’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
dsl_dataset.c:1591:2: error: ‘ds’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
dsl_dataset.c:3341:2: error: ‘ds’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vdev_raidz.c:1153:8: error: 'dcount[2]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
vdev_raidz.c:1167:17: error: 'dst[2]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
kernel.c:1005:2: error: ‘resid’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
libzfs_dataset.c:2826:8: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
libzfs_dataset.c:3056:35: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
libzfs_dataset.c:1584:13: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
libzfs_dataset.c:3056:35: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
libzfs_dataset.c:1792:66: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
libzfs_dataset.c:3986:35: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
[GCC 6.1.1]
Resolved in PR #4907
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4937
