Remove unnecessary CSTYLED escapes on top-level macro invocations

cstyle can handle these cases now, so we don't need to disable it.

Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #16840

module/os/linux/spl/spl-err.c

@@ -33,7 +33,6 @@
  * But we would still default to the current default of not to do that.
  */
 static unsigned int spl_panic_halt;
-/* CSTYLED */
 module_param(spl_panic_halt, uint, 0644);
 MODULE_PARM_DESC(spl_panic_halt, "Cause kernel panic on assertion failures");
 

module/os/linux/spl/spl-generic.c

@@ -54,7 +54,6 @@
 unsigned long spl_hostid = 0;
 EXPORT_SYMBOL(spl_hostid);
 
-/* CSTYLED */
 module_param(spl_hostid, ulong, 0644);
 MODULE_PARM_DESC(spl_hostid, "The system hostid.");
 

module/os/linux/spl/spl-kmem-cache.c

@@ -48,7 +48,6 @@
 #define	smp_mb__after_atomic(x) smp_mb__after_clear_bit(x)
 #endif
 
-/* BEGIN CSTYLED */
 /*
  * Cache magazines are an optimization designed to minimize the cost of
  * allocating memory.  They do this by keeping a per-cpu cache of recently
@@ -97,7 +96,6 @@ static unsigned int spl_kmem_cache_kmem_threads = 4;
 module_param(spl_kmem_cache_kmem_threads, uint, 0444);
 MODULE_PARM_DESC(spl_kmem_cache_kmem_threads,
 	"Number of spl_kmem_cache threads");
-/* END CSTYLED */
 
 /*
  * Slab allocation interfaces

module/os/linux/spl/spl-kmem.c

@@ -26,7 +26,6 @@
 #include <sys/kmem.h>
 #include <sys/vmem.h>
 
-/* BEGIN CSTYLED */
 /*
  * As a general rule kmem_alloc() allocations should be small, preferably
  * just a few pages since they must by physically contiguous.  Therefore, a
@@ -62,7 +61,6 @@ module_param(spl_kmem_alloc_max, uint, 0644);
 MODULE_PARM_DESC(spl_kmem_alloc_max,
 	"Maximum size in bytes for a kmem_alloc()");
 EXPORT_SYMBOL(spl_kmem_alloc_max);
-/* END CSTYLED */
 
 int
 kmem_debugging(void)

module/os/linux/spl/spl-taskq.c

@@ -117,9 +117,7 @@ module_param(spl_taskq_thread_bind, int, 0644);
 MODULE_PARM_DESC(spl_taskq_thread_bind, "Bind taskq thread to CPU by default");
 
 static uint_t spl_taskq_thread_timeout_ms = 5000;
-/* BEGIN CSTYLED */
 module_param(spl_taskq_thread_timeout_ms, uint, 0644);
-/* END CSTYLED */
 MODULE_PARM_DESC(spl_taskq_thread_timeout_ms,
 	"Minimum idle threads exit interval for dynamic taskqs");
 
@@ -133,9 +131,7 @@ MODULE_PARM_DESC(spl_taskq_thread_priority,
 	"Allow non-default priority for taskq threads");
 
 static uint_t spl_taskq_thread_sequential = 4;
-/* BEGIN CSTYLED */
 module_param(spl_taskq_thread_sequential, uint, 0644);
-/* END CSTYLED */
 MODULE_PARM_DESC(spl_taskq_thread_sequential,
 	"Create new taskq threads after N sequential tasks");
 

module/os/linux/zfs/abd_os.c

@@ -1346,7 +1346,6 @@ MODULE_PARM_DESC(zfs_abd_scatter_enabled,
 module_param(zfs_abd_scatter_min_size, int, 0644);
 MODULE_PARM_DESC(zfs_abd_scatter_min_size,
 	"Minimum size of scatter allocations.");
-/* CSTYLED */
 module_param(zfs_abd_scatter_max_order, uint, 0644);
 MODULE_PARM_DESC(zfs_abd_scatter_max_order,
 	"Maximum order allocation used for a scatter ABD.");

module/os/linux/zfs/zfs_debug.c

@@ -214,7 +214,5 @@ __dprintf(boolean_t dprint, const char *file, const char *func,
 module_param(zfs_dbgmsg_enable, int, 0644);
 MODULE_PARM_DESC(zfs_dbgmsg_enable, "Enable ZFS debug message log");
 
-/* BEGIN CSTYLED */
 module_param(zfs_dbgmsg_maxsize, uint, 0644);
-/* END CSTYLED */
 MODULE_PARM_DESC(zfs_dbgmsg_maxsize, "Maximum ZFS debug log size");

module/os/linux/zfs/zfs_vnops_os.c

@@ -4345,7 +4345,6 @@ EXPORT_SYMBOL(zfs_putpage);
 EXPORT_SYMBOL(zfs_dirty_inode);
 EXPORT_SYMBOL(zfs_map);
 
-/* CSTYLED */
 module_param(zfs_delete_blocks, ulong, 0644);
 MODULE_PARM_DESC(zfs_delete_blocks, "Delete files larger than N blocks async");
 #endif

module/os/linux/zfs/zfs_znode_os.c

@@ -1967,7 +1967,6 @@ zfs_create_fs(objset_t *os, cred_t *cr, nvlist_t *zplprops, dmu_tx_t *tx)
 EXPORT_SYMBOL(zfs_create_fs);
 EXPORT_SYMBOL(zfs_obj_to_path);
 
-/* CSTYLED */
 module_param(zfs_object_mutex_size, uint, 0644);
 MODULE_PARM_DESC(zfs_object_mutex_size, "Size of znode hold array");
 module_param(zfs_unlink_suspend_progress, int, 0644);

module/os/linux/zfs/zio_crypt.c

@@ -2073,7 +2073,6 @@ error:
 }
 
 #if defined(_KERNEL)
-/* CSTYLED */
 module_param(zfs_key_max_salt_uses, ulong, 0644);
 MODULE_PARM_DESC(zfs_key_max_salt_uses, "Max number of times a salt value "
 	"can be used for generating encryption keys before it is rotated");

module/os/linux/zfs/zpl_file.c

@@ -1143,7 +1143,6 @@ const struct file_operations zpl_dir_file_operations = {
 #endif
 };
 
-/* CSTYLED */
 module_param(zfs_fallocate_reserve_percent, uint, 0644);
 MODULE_PARM_DESC(zfs_fallocate_reserve_percent,
 	"Percentage of length to use for the available capacity check");

module/os/linux/zfs/zvol_os.c

@@ -1899,7 +1899,6 @@ zvol_fini(void)
 	ida_destroy(&zvol_ida);
 }
 
-/* BEGIN CSTYLED */
 module_param(zvol_inhibit_dev, uint, 0644);
 MODULE_PARM_DESC(zvol_inhibit_dev, "Do not create zvol device nodes");
 
@@ -1908,7 +1907,7 @@ MODULE_PARM_DESC(zvol_major, "Major number for zvol device");
 
 module_param(zvol_threads, uint, 0444);
 MODULE_PARM_DESC(zvol_threads, "Number of threads to handle I/O requests. Set"
-    "to 0 to use all active CPUs");
+	"to 0 to use all active CPUs");
 
 module_param(zvol_request_sync, uint, 0644);
 MODULE_PARM_DESC(zvol_request_sync, "Synchronously handle bio requests");
@@ -1933,11 +1932,9 @@ MODULE_PARM_DESC(zvol_use_blk_mq, "Use the blk-mq API for zvols");
 
 module_param(zvol_blk_mq_blocks_per_thread, uint, 0644);
 MODULE_PARM_DESC(zvol_blk_mq_blocks_per_thread,
-    "Process volblocksize blocks per thread");
+	"Process volblocksize blocks per thread");
 
 #ifndef HAVE_BLKDEV_GET_ERESTARTSYS
 module_param(zvol_open_timeout_ms, uint, 0644);
 MODULE_PARM_DESC(zvol_open_timeout_ms, "Timeout for ZVOL open retries");
 #endif
-
-/* END CSTYLED */