Fix zil replay panic when TX_REMOVE followed by TX_CREATE

If TX_REMOVE is followed by TX_CREATE on the same object id, we need to
make sure the object removal is completely finished before creation. The
current implementation relies on dnode_hold_impl with
DNODE_MUST_BE_ALLOCATED returning ENOENT. While this check seems to work
fine before, in current version it does not guarantee the object removal
is completed.

We fix this by checking if DNODE_MUST_BE_FREE returns successful
instead. Also add test and remove dead code in dnode_hold_impl.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7151
Closes #8910
Closes #9123
Closes #9145

tests/runfiles/linux.run

@@ -824,8 +824,8 @@ tags = ['functional', 'scrub_mirror']
 tests = ['slog_001_pos', 'slog_002_pos', 'slog_003_pos', 'slog_004_pos',
     'slog_005_pos', 'slog_006_pos', 'slog_007_pos', 'slog_008_neg',
     'slog_009_neg', 'slog_010_neg', 'slog_011_neg', 'slog_012_neg',
-    'slog_013_pos', 'slog_014_pos', 'slog_015_neg', 'slog_replay_fs',
-    'slog_replay_volume']
+    'slog_013_pos', 'slog_014_pos', 'slog_015_neg', 'slog_replay_fs_001',
+    'slog_replay_fs_002', 'slog_replay_volume']
 tags = ['functional', 'slog']
 
 [tests/functional/snapshot]

tests/zfs-tests/tests/functional/slog/Makefile.am

@@ -17,7 +17,8 @@ dist_pkgdata_SCRIPTS = \
 	slog_013_pos.ksh \
 	slog_014_pos.ksh \
 	slog_015_neg.ksh \
-	slog_replay_fs.ksh \
+	slog_replay_fs_001.ksh \
+	slog_replay_fs_002.ksh \
 	slog_replay_volume.ksh
 
 dist_pkgdata_DATA = \

tests/zfs-tests/tests/functional/slog/slog_replay_fs_002.ksh

@@ -0,0 +1,137 @@
+#!/bin/ksh -p
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
+# Use is subject to license terms.
+#
+
+. $STF_SUITE/tests/functional/slog/slog.kshlib
+
+#
+# DESCRIPTION:
+#	Verify slog replay correctly when TX_REMOVEs are followed by
+#	TX_CREATEs.
+#
+# STRATEGY:
+#	1. Create a file system (TESTFS) with a lot of files
+#	2. Freeze TESTFS
+#	3. Remove all files then create a lot of files
+#	4. Copy TESTFS to temporary location (TESTDIR/copy)
+#	5. Unmount filesystem
+#	   <at this stage TESTFS is empty again and unfrozen, and the
+#	   intent log contains a complete set of deltas to replay it>
+#	6. Remount TESTFS <which replays the intent log>
+#	7. Compare TESTFS against the TESTDIR/copy
+#
+
+verify_runnable "global"
+
+function cleanup_fs
+{
+	cleanup
+}
+
+log_assert "Replay of intent log succeeds."
+log_onexit cleanup_fs
+log_must setup
+
+#
+# 1. Create a file system (TESTFS) with a lot of files
+#
+log_must zpool create $TESTPOOL $VDEV log mirror $LDEV
+log_must zfs set compression=on $TESTPOOL
+log_must zfs create $TESTPOOL/$TESTFS
+
+# Prep for the test of TX_REMOVE followed by TX_CREATE
+dnsize=(legacy auto 1k 2k 4k 8k 16k)
+NFILES=200
+log_must mkdir /$TESTPOOL/$TESTFS/dir0
+log_must eval 'for i in $(seq $NFILES); do zfs set dnodesize=${dnsize[$RANDOM % ${#dnsize[@]}]} $TESTPOOL/$TESTFS; touch /$TESTPOOL/$TESTFS/dir0/file.$i; done'
+
+#
+# Reimport to reset dnode allocation pointer.
+# This is to make sure we will have TX_REMOVE and TX_CREATE on same id
+#
+log_must zpool export $TESTPOOL
+log_must zpool import -f -d $VDIR $TESTPOOL
+
+#
+# This dd command works around an issue where ZIL records aren't created
+# after freezing the pool unless a ZIL header already exists. Create a file
+# synchronously to force ZFS to write one out.
+#
+log_must dd if=/dev/zero of=/$TESTPOOL/$TESTFS/sync \
+    conv=fdatasync,fsync bs=1 count=1
+
+#
+# 2. Freeze TESTFS
+#
+log_must zpool freeze $TESTPOOL
+
+#
+# 3. Remove all files then create a lot of files
+#
+# TX_REMOVE followed by TX_CREATE
+log_must eval 'rm -f /$TESTPOOL/$TESTFS/dir0/*'
+log_must eval 'for i in $(seq $NFILES); do zfs set dnodesize=${dnsize[$RANDOM % ${#dnsize[@]}]} $TESTPOOL/$TESTFS; touch /$TESTPOOL/$TESTFS/dir0/file.$i; done'
+
+#
+# 4. Copy TESTFS to temporary location (TESTDIR/copy)
+#
+log_must mkdir -p $TESTDIR/copy
+log_must cp -a /$TESTPOOL/$TESTFS/* $TESTDIR/copy/
+
+#
+# 5. Unmount filesystem and export the pool
+#
+# At this stage TESTFS is empty again and frozen, the intent log contains
+# a complete set of deltas to replay.
+#
+log_must zfs unmount /$TESTPOOL/$TESTFS
+
+log_note "Verify transactions to replay:"
+log_must zdb -iv $TESTPOOL/$TESTFS
+
+log_must zpool export $TESTPOOL
+
+#
+# 6. Remount TESTFS <which replays the intent log>
+#
+# Import the pool to unfreeze it and claim log blocks.  It has to be
+# `zpool import -f` because we can't write a frozen pool's labels!
+#
+log_must zpool import -f -d $VDIR $TESTPOOL
+
+#
+# 7. Compare TESTFS against the TESTDIR/copy
+#
+log_note "Verify current block usage:"
+log_must zdb -bcv $TESTPOOL
+
+log_note "Verify number of files"
+log_must test "$(ls /$TESTPOOL/$TESTFS/dir0 | wc -l)" -eq $NFILES
+
+log_note "Verify working set diff:"
+log_must diff -r /$TESTPOOL/$TESTFS $TESTDIR/copy
+
+log_pass "Replay of intent log succeeds."