vdev probe to slow disk can stall mmp write checker

Simplify vdev probes in the zio_vdev_io_done context to
avoid holding the spa config lock for a long duration.

Also allow zpool clear if no evidence of another host
is using the pool.

Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes #15839

cmd/zpool/zpool_main.c

@@ -9050,7 +9050,7 @@ status_callback(zpool_handle_t *zhp, void *data)
 		printf_color(ANSI_BOLD, gettext("action: "));
 		printf_color(ANSI_YELLOW, gettext("Make sure the pool's devices"
 		    " are connected, then reboot your system and\n\timport the "
-		    "pool.\n"));
+		    "pool or run 'zpool clear' to resume the pool.\n"));
 		break;
 
 	case ZPOOL_STATUS_IO_FAILURE_WAIT:

include/sys/spa.h

@@ -770,7 +770,7 @@ extern int bpobj_enqueue_free_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx);
 
 #define	SPA_ASYNC_CONFIG_UPDATE			0x01
 #define	SPA_ASYNC_REMOVE			0x02
-#define	SPA_ASYNC_PROBE				0x04
+#define	SPA_ASYNC_FAULT_VDEV			0x04
 #define	SPA_ASYNC_RESILVER_DONE			0x08
 #define	SPA_ASYNC_RESILVER			0x10
 #define	SPA_ASYNC_AUTOEXPAND			0x20
@@ -1123,6 +1123,8 @@ extern uint32_t spa_get_hostid(spa_t *spa);
 extern void spa_activate_allocation_classes(spa_t *, dmu_tx_t *);
 extern boolean_t spa_livelist_delete_check(spa_t *spa);
 
+extern boolean_t spa_mmp_remote_host_activity(spa_t *spa);
+
 extern spa_mode_t spa_mode(spa_t *spa);
 extern uint64_t zfs_strtonum(const char *str, char **nptr);
 

include/sys/uberblock_impl.h

@@ -50,20 +50,20 @@ extern "C" {
 #define	MMP_SEQ_VALID_BIT	0x02
 #define	MMP_FAIL_INT_VALID_BIT	0x04
 
-#define	MMP_VALID(ubp)		(ubp->ub_magic == UBERBLOCK_MAGIC && \
-				    ubp->ub_mmp_magic == MMP_MAGIC)
-#define	MMP_INTERVAL_VALID(ubp)	(MMP_VALID(ubp) && (ubp->ub_mmp_config & \
+#define	MMP_VALID(ubp)		((ubp)->ub_magic == UBERBLOCK_MAGIC && \
+				    (ubp)->ub_mmp_magic == MMP_MAGIC)
+#define	MMP_INTERVAL_VALID(ubp)	(MMP_VALID(ubp) && ((ubp)->ub_mmp_config & \
 				    MMP_INTERVAL_VALID_BIT))
-#define	MMP_SEQ_VALID(ubp)	(MMP_VALID(ubp) && (ubp->ub_mmp_config & \
+#define	MMP_SEQ_VALID(ubp)	(MMP_VALID(ubp) && ((ubp)->ub_mmp_config & \
 				    MMP_SEQ_VALID_BIT))
-#define	MMP_FAIL_INT_VALID(ubp)	(MMP_VALID(ubp) && (ubp->ub_mmp_config & \
+#define	MMP_FAIL_INT_VALID(ubp)	(MMP_VALID(ubp) && ((ubp)->ub_mmp_config & \
 				    MMP_FAIL_INT_VALID_BIT))
 
-#define	MMP_INTERVAL(ubp)	((ubp->ub_mmp_config & 0x00000000FFFFFF00) \
+#define	MMP_INTERVAL(ubp)	(((ubp)->ub_mmp_config & 0x00000000FFFFFF00) \
 				    >> 8)
-#define	MMP_SEQ(ubp)		((ubp->ub_mmp_config & 0x0000FFFF00000000) \
+#define	MMP_SEQ(ubp)		(((ubp)->ub_mmp_config & 0x0000FFFF00000000) \
 				    >> 32)
-#define	MMP_FAIL_INT(ubp)	((ubp->ub_mmp_config & 0xFFFF000000000000) \
+#define	MMP_FAIL_INT(ubp)	(((ubp)->ub_mmp_config & 0xFFFF000000000000) \
 				    >> 48)
 
 #define	MMP_INTERVAL_SET(write) \

include/sys/vdev_impl.h

@@ -273,7 +273,7 @@ struct vdev {
 	txg_list_t	vdev_dtl_list;	/* per-txg dirty DTL lists	*/
 	txg_node_t	vdev_txg_node;	/* per-txg dirty vdev linkage	*/
 	boolean_t	vdev_remove_wanted; /* async remove wanted?	*/
-	boolean_t	vdev_probe_wanted; /* async probe wanted?	*/
+	boolean_t	vdev_fault_wanted; /* async faulted wanted?	*/
 	list_node_t	vdev_config_dirty_node; /* config dirty list	*/
 	list_node_t	vdev_state_dirty_node; /* state dirty list	*/
 	uint64_t	vdev_deflate_ratio; /* deflation ratio (x512)	*/

man/man8/zpool-clear.8

@@ -50,9 +50,10 @@ If the pool was suspended it will be brought back online provided the
 devices can be accessed.
 Pools with
 .Sy multihost
-enabled which have been suspended cannot be resumed.
-While the pool was suspended, it may have been imported on
-another host, and resuming I/O could result in pool damage.
+enabled which have been suspended cannot be resumed when there is evidence
+that the pool was imported by another host.
+The same checks performed during an import will be applied before the clear
+proceeds.
 .Bl -tag -width Ds
 .It Fl -power
 Power on the devices's slot in the storage enclosure and wait for the device

module/zfs/mmp.c

@@ -664,12 +664,13 @@ mmp_thread(void *arg)
 		    (gethrtime() - mmp->mmp_last_write) > mmp_fail_ns) {
 			zfs_dbgmsg("MMP suspending pool '%s': gethrtime %llu "
 			    "mmp_last_write %llu mmp_interval %llu "
-			    "mmp_fail_intervals %llu mmp_fail_ns %llu",
+			    "mmp_fail_intervals %llu mmp_fail_ns %llu txg %llu",
 			    spa_name(spa), (u_longlong_t)gethrtime(),
 			    (u_longlong_t)mmp->mmp_last_write,
 			    (u_longlong_t)mmp_interval,
 			    (u_longlong_t)mmp_fail_intervals,
-			    (u_longlong_t)mmp_fail_ns);
+			    (u_longlong_t)mmp_fail_ns,
+			    (u_longlong_t)spa->spa_uberblock.ub_txg);
 			cmn_err(CE_WARN, "MMP writes to pool '%s' have not "
 			    "succeeded in over %llu ms; suspending pool. "
 			    "Hrtime %llu",

module/zfs/spa.c

@@ -3594,11 +3594,16 @@ spa_activity_check_duration(spa_t *spa, uberblock_t *ub)
 }
 
 /*
- * Perform the import activity check.  If the user canceled the import or
- * we detected activity then fail.
+ * Remote host activity check.
+ *
+ * error results:
+ *          0 - no activity detected
+ *  EREMOTEIO - remote activity detected
+ *      EINTR - user canceled the operation
  */
 static int
-spa_activity_check(spa_t *spa, uberblock_t *ub, nvlist_t *config)
+spa_activity_check(spa_t *spa, uberblock_t *ub, nvlist_t *config,
+    boolean_t importing)
 {
 	uint64_t txg = ub->ub_txg;
 	uint64_t timestamp = ub->ub_timestamp;
@@ -3643,19 +3648,23 @@ spa_activity_check(spa_t *spa, uberblock_t *ub, nvlist_t *config)
 
 	import_expire = gethrtime() + import_delay;
 
-	spa_import_progress_set_notes(spa, "Checking MMP activity, waiting "
-	    "%llu ms", (u_longlong_t)NSEC2MSEC(import_delay));
+	if (importing) {
+		spa_import_progress_set_notes(spa, "Checking MMP activity, "
+		    "waiting %llu ms", (u_longlong_t)NSEC2MSEC(import_delay));
+	}
 
-	int interations = 0;
+	int iterations = 0;
 	while ((now = gethrtime()) < import_expire) {
-		if (interations++ % 30 == 0) {
+		if (importing && iterations++ % 30 == 0) {
 			spa_import_progress_set_notes(spa, "Checking MMP "
 			    "activity, %llu ms remaining",
 			    (u_longlong_t)NSEC2MSEC(import_expire - now));
 		}
 
+		if (importing) {
 			(void) spa_import_progress_set_mmp_check(spa_guid(spa),
 			    NSEC2SEC(import_expire - gethrtime()));
+		}
 
 		vdev_uberblock_load(rvd, ub, &mmp_label);
 
@@ -3737,6 +3746,61 @@ out:
 	return (error);
 }
 
+/*
+ * Called from zfs_ioc_clear for a pool that was suspended
+ * after failing mmp write checks.
+ */
+boolean_t
+spa_mmp_remote_host_activity(spa_t *spa)
+{
+	ASSERT(spa_multihost(spa) && spa_suspended(spa));
+
+	nvlist_t *best_label;
+	uberblock_t best_ub;
+
+	/*
+	 * Locate the best uberblock on disk
+	 */
+	vdev_uberblock_load(spa->spa_root_vdev, &best_ub, &best_label);
+	if (best_label) {
+		/*
+		 * confirm that the best hostid matches our hostid
+		 */
+		if (nvlist_exists(best_label, ZPOOL_CONFIG_HOSTID) &&
+		    spa_get_hostid(spa) !=
+		    fnvlist_lookup_uint64(best_label, ZPOOL_CONFIG_HOSTID)) {
+			nvlist_free(best_label);
+			return (B_TRUE);
+		}
+		nvlist_free(best_label);
+	} else {
+		return (B_TRUE);
+	}
+
+	if (!MMP_VALID(&best_ub) ||
+	    !MMP_FAIL_INT_VALID(&best_ub) ||
+	    MMP_FAIL_INT(&best_ub) == 0) {
+		return (B_TRUE);
+	}
+
+	if (best_ub.ub_txg != spa->spa_uberblock.ub_txg ||
+	    best_ub.ub_timestamp != spa->spa_uberblock.ub_timestamp) {
+		zfs_dbgmsg("txg mismatch detected during pool clear "
+		    "txg %llu ub_txg %llu timestamp %llu ub_timestamp %llu",
+		    (u_longlong_t)spa->spa_uberblock.ub_txg,
+		    (u_longlong_t)best_ub.ub_txg,
+		    (u_longlong_t)spa->spa_uberblock.ub_timestamp,
+		    (u_longlong_t)best_ub.ub_timestamp);
+		return (B_TRUE);
+	}
+
+	/*
+	 * Perform an activity check looking for any remote writer
+	 */
+	return (spa_activity_check(spa, &spa->spa_uberblock, spa->spa_config,
+	    B_FALSE) != 0);
+}
+
 static int
 spa_verify_host(spa_t *spa, nvlist_t *mos_config)
 {
@@ -4063,7 +4127,8 @@ spa_ld_select_uberblock(spa_t *spa, spa_import_type_t type)
 			return (spa_vdev_err(rvd, VDEV_AUX_ACTIVE, EREMOTEIO));
 		}
 
-		int error = spa_activity_check(spa, ub, spa->spa_config);
+		int error =
+		    spa_activity_check(spa, ub, spa->spa_config, B_TRUE);
 		if (error) {
 			nvlist_free(label);
 			return (error);
@@ -8771,15 +8836,16 @@ spa_async_remove(spa_t *spa, vdev_t *vd)
 }
 
 static void
-spa_async_probe(spa_t *spa, vdev_t *vd)
+spa_async_fault_vdev(spa_t *spa, vdev_t *vd)
 {
-	if (vd->vdev_probe_wanted) {
-		vd->vdev_probe_wanted = B_FALSE;
-		vdev_reopen(vd);	/* vdev_open() does the actual probe */
+	if (vd->vdev_fault_wanted) {
+		vd->vdev_fault_wanted = B_FALSE;
+		vdev_set_state(vd, B_TRUE, VDEV_STATE_FAULTED,
+		    VDEV_AUX_ERR_EXCEEDED);
 	}
 
 	for (int c = 0; c < vd->vdev_children; c++)
-		spa_async_probe(spa, vd->vdev_child[c]);
+		spa_async_fault_vdev(spa, vd->vdev_child[c]);
 }
 
 static void
@@ -8867,11 +8933,11 @@ spa_async_thread(void *arg)
 	}
 
 	/*
-	 * See if any devices need to be probed.
+	 * See if any devices need to be marked faulted.
 	 */
-	if (tasks & SPA_ASYNC_PROBE) {
+	if (tasks & SPA_ASYNC_FAULT_VDEV) {
 		spa_vdev_state_enter(spa, SCL_NONE);
-		spa_async_probe(spa, spa->spa_root_vdev);
+		spa_async_fault_vdev(spa, spa->spa_root_vdev);
 		(void) spa_vdev_state_exit(spa, NULL, 0);
 	}
 

module/zfs/txg.c

@@ -550,6 +550,15 @@ txg_sync_thread(void *arg)
 			timer = (delta > timeout ? 0 : timeout - delta);
 		}
 
+		/*
+		 * When we're suspended, nothing should be changing and for
+		 * MMP we don't want to bump anything that would make it
+		 * harder to detect if another host is changing it when
+		 * resuming after a MMP suspend.
+		 */
+		if (spa_suspended(spa))
+			continue;
+
 		/*
 		 * Wait until the quiesce thread hands off a txg to us,
 		 * prompting it to do so if necessary.

module/zfs/vdev.c

@@ -1664,6 +1664,7 @@ vdev_metaslab_fini(vdev_t *vd)
 typedef struct vdev_probe_stats {
 	boolean_t	vps_readable;
 	boolean_t	vps_writeable;
+	boolean_t	vps_zio_done_probe;
 	int		vps_flags;
 } vdev_probe_stats_t;
 
@@ -1709,6 +1710,17 @@ vdev_probe_done(zio_t *zio)
 			(void) zfs_ereport_post(FM_EREPORT_ZFS_PROBE_FAILURE,
 			    spa, vd, NULL, NULL, 0);
 			zio->io_error = SET_ERROR(ENXIO);
+
+			/*
+			 * If this probe was initiated from zio pipeline, then
+			 * change the state in a spa_async_request. Probes that
+			 * were initiated from a vdev_open can change the state
+			 * as part of the open call.
+			 */
+			if (vps->vps_zio_done_probe) {
+				vd->vdev_fault_wanted = B_TRUE;
+				spa_async_request(spa, SPA_ASYNC_FAULT_VDEV);
+			}
 		}
 
 		mutex_enter(&vd->vdev_probe_lock);
@@ -1759,6 +1771,7 @@ vdev_probe(vdev_t *vd, zio_t *zio)
 
 		vps->vps_flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_PROBE |
 		    ZIO_FLAG_DONT_AGGREGATE | ZIO_FLAG_TRYHARD;
+		vps->vps_zio_done_probe = (zio != NULL);
 
 		if (spa_config_held(spa, SCL_ZIO, RW_WRITER)) {
 			/*
@@ -1785,15 +1798,6 @@ vdev_probe(vdev_t *vd, zio_t *zio)
 		vd->vdev_probe_zio = pio = zio_null(NULL, spa, vd,
 		    vdev_probe_done, vps,
 		    vps->vps_flags | ZIO_FLAG_DONT_PROPAGATE);
-
-		/*
-		 * We can't change the vdev state in this context, so we
-		 * kick off an async task to do it on our behalf.
-		 */
-		if (zio != NULL) {
-			vd->vdev_probe_wanted = B_TRUE;
-			spa_async_request(spa, SPA_ASYNC_PROBE);
-		}
 	}
 
 	if (zio != NULL)

module/zfs/vdev_label.c

@@ -2027,6 +2027,7 @@ retry:
 	/*
 	 * If this isn't a resync due to I/O errors,
 	 * and nothing changed in this transaction group,
+	 * and multihost protection isn't enabled,
 	 * and the vdev configuration hasn't changed,
 	 * then there's nothing to do.
 	 */
@@ -2034,7 +2035,8 @@ retry:
 		boolean_t changed = uberblock_update(ub, spa->spa_root_vdev,
 		    txg, spa->spa_mmp.mmp_delay);
 
-		if (!changed && list_is_empty(&spa->spa_config_dirty_list))
+		if (!changed && list_is_empty(&spa->spa_config_dirty_list) &&
+		    !spa_multihost(spa))
 			return (0);
 	}
 

module/zfs/zfs_ioctl.c

@@ -5823,10 +5823,13 @@ zfs_ioc_clear(zfs_cmd_t *zc)
 
 	/*
 	 * If multihost is enabled, resuming I/O is unsafe as another
-	 * host may have imported the pool.
+	 * host may have imported the pool. Check for remote activity.
 	 */
-	if (spa_multihost(spa) && spa_suspended(spa))
-		return (SET_ERROR(EINVAL));
+	if (spa_multihost(spa) && spa_suspended(spa) &&
+	    spa_mmp_remote_host_activity(spa)) {
+		spa_close(spa, FTAG);
+		return (SET_ERROR(EREMOTEIO));
+	}
 
 	spa_vdev_state_enter(spa, SCL_NONE);
 

module/zfs/zio.c

@@ -2532,8 +2532,10 @@ zio_suspend(spa_t *spa, zio_t *zio, zio_suspend_reason_t reason)
 		    "failure and the failure mode property for this pool "
 		    "is set to panic.", spa_name(spa));
 
-	cmn_err(CE_WARN, "Pool '%s' has encountered an uncorrectable I/O "
-	    "failure and has been suspended.\n", spa_name(spa));
+	if (reason != ZIO_SUSPEND_MMP) {
+		cmn_err(CE_WARN, "Pool '%s' has encountered an uncorrectable "
+		    "I/O failure and has been suspended.\n", spa_name(spa));
+	}
 
 	(void) zfs_ereport_post(FM_EREPORT_ZFS_IO_FAILURE, spa, NULL,
 	    NULL, NULL, 0);

module/zfs/zio_inject.c

@@ -607,9 +607,11 @@ zio_handle_io_delay(zio_t *zio)
 		if (vd->vdev_guid != handler->zi_record.zi_guid)
 			continue;
 
+		/* also match on I/O type (e.g., -T read) */
 		if (handler->zi_record.zi_iotype != ZIO_TYPES &&
-		    handler->zi_record.zi_iotype != zio->io_type)
+		    handler->zi_record.zi_iotype != zio->io_type) {
 			continue;
+		}
 
 		/*
 		 * Defensive; should never happen as the array allocation

tests/runfiles/linux.run

@@ -146,7 +146,7 @@ tags = ['functional', 'mmap']
 tests = ['mmp_on_thread', 'mmp_on_uberblocks', 'mmp_on_off', 'mmp_interval',
     'mmp_active_import', 'mmp_inactive_import', 'mmp_exported_import',
     'mmp_write_uberblocks', 'mmp_reset_interval', 'multihost_history',
-    'mmp_on_zdb', 'mmp_write_distribution', 'mmp_hostid']
+    'mmp_on_zdb', 'mmp_write_distribution', 'mmp_hostid', 'mmp_write_slow_disk']
 tags = ['functional', 'mmp']
 
 [tests/functional/mount:Linux]

tests/zfs-tests/tests/Makefile.am

@@ -1593,6 +1593,7 @@ nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \
 	functional/mmp/mmp_on_zdb.ksh \
 	functional/mmp/mmp_reset_interval.ksh \
 	functional/mmp/mmp_write_distribution.ksh \
+	functional/mmp/mmp_write_slow_disk.ksh \
 	functional/mmp/mmp_write_uberblocks.ksh \
 	functional/mmp/multihost_history.ksh \
 	functional/mmp/setup.ksh \

tests/zfs-tests/tests/functional/mmp/mmp_write_slow_disk.ksh

@@ -0,0 +1,97 @@
+#!/bin/ksh -p
+#
+# CDDL HEADER START
+#
+# This file and its contents are supplied under the terms of the
+# Common Development and Distribution License ("CDDL"), version 1.0.
+# You may only use this file in accordance with the terms of version
+# 1.0 of the CDDL.
+#
+# A full copy of the text of the CDDL should have accompanied this
+# source.  A copy of the CDDL is also available via the Internet at
+# http://www.illumos.org/license/CDDL.
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright (c) 2024, Klara Inc
+#
+
+# DESCRIPTION:
+#	Verify that long VDEV probes do not cause MMP checks to suspend pool
+#	Note: without PR-15839 fix, this test will suspend the pool.
+#
+#	A device that is returning unexpected errors will trigger a vdev_probe.
+#	When the device additionally has slow response times, the probe can hold
+#	the spa config lock as a writer for a long period of time such that the
+#	mmp uberblock updates stall when trying to acquire the spa config lock.
+#
+# STRATEGY:
+#	1. Create a pool with multiple leaf vdevs
+#	2. Enable multihost and multihost_history
+#	3. Delay for MMP writes to occur
+#	4. Verify that a long VDEV probe didn't cause MMP check to suspend pool
+#
+
+. $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/mmp/mmp.cfg
+. $STF_SUITE/tests/functional/mmp/mmp.kshlib
+
+verify_runnable "both"
+
+function cleanup
+{
+	log_must zinject -c all
+
+	if [[ $(zpool list -H -o health $MMP_POOL) == "SUSPENDED" ]]; then
+		log_must zpool clear $MMP_POOL
+		zpool get state $MMP_POOL $MMP_DIR/file.3
+		zpool events | grep ".fs.zfs." | grep -v "history_event"
+	fi
+
+	poolexists $MMP_POOL && destroy_pool $MMP_POOL
+	log_must rm -r $MMP_DIR
+	log_must mmp_clear_hostid
+}
+
+log_assert "A long VDEV probe doesn't cause a MMP check suspend"
+log_onexit cleanup
+
+MMP_HISTORY_URL=/proc/spl/kstat/zfs/$MMP_POOL/multihost
+
+# Create a multiple drive pool
+log_must zpool events -c
+log_must mkdir -p $MMP_DIR
+log_must truncate -s 128M $MMP_DIR/file.{0,1,2,3,4,5}
+log_must zpool create -f $MMP_POOL \
+	mirror $MMP_DIR/file.{0,1,2} \
+	mirror $MMP_DIR/file.{3,4,5}
+
+# Enable MMP
+log_must mmp_set_hostid $HOSTID1
+log_must zpool set multihost=on $MMP_POOL
+clear_mmp_history
+
+# Inject vdev write error along with a delay
+log_must zinject -f 33 -e io -L pad2 -T write -d $MMP_DIR/file.3 $MMP_POOL
+log_must zinject -f 50 -e io -L uber -T write -d $MMP_DIR/file.3 $MMP_POOL
+log_must zinject -D 2000:4 -T write -d $MMP_DIR/file.3 $MMP_POOL
+
+log_must dd if=/dev/urandom of=/$MMP_POOL/data bs=1M count=5
+sleep 10
+sync_pool $MMP_POOL
+
+# Confirm mmp writes to the non-slow disks have taken place
+for x in {0,1,2,4}; do
+	write_count=$(grep -c file.${x} $MMP_HISTORY_URL)
+	[[ $write_count -gt 0 ]] || log_fail "expecting mmp writes"
+done
+
+# Expect that the pool was not suspended
+log_must check_state $MMP_POOL "" "ONLINE"
+health=$(zpool list -H -o health $MMP_POOL)
+log_note "$MMP_POOL health is $health"
+[[ "$health" == "SUSPENDED" ]] && log_fail "$MMP_POOL $health unexpected"
+
+log_pass "A long VDEV probe doesn't cause a MMP check suspend"