Improve resilver ETAs

When resilvering the estimated time remaining is calculated using
the average issue rate over the current pass.  Where the current
pass starts when a scan was started, or restarted, if the pool
was exported/imported.

For dRAID pools in particular this can result in wildly optimistic
estimates since the issue rate will be very high while scanning
when non-degraded regions of the pool are scanned.  Once repair
I/O starts being issued performance drops to a realistic number
but the estimated performance is still significantly skewed.

To address this we redefine a pass such that it starts after a
scanning phase completes so the issue rate is more reflective of
recent performance.  Additionally, the zfs_scan_report_txgs
module option can be set to reset the pass statistics more often.

Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14410
This commit is contained in:
Brian Behlendorf
2023-01-25 11:28:54 -08:00
parent a68dfdb88c
commit 9fe3da9364
4 changed files with 57 additions and 12 deletions
+22 -11
View File
@@ -7549,19 +7549,20 @@ print_scan_scrub_resilver_status(pool_scan_stat_t *ps)
zfs_nicebytes(ps->pss_processed, processed_buf, sizeof (processed_buf));
assert(ps->pss_func == POOL_SCAN_SCRUB ||
ps->pss_func == POOL_SCAN_RESILVER);
int is_resilver = ps->pss_func == POOL_SCAN_RESILVER;
int is_scrub = ps->pss_func == POOL_SCAN_SCRUB;
assert(is_resilver || is_scrub);
/* Scan is finished or canceled. */
if (ps->pss_state == DSS_FINISHED) {
secs_to_dhms(end - start, time_buf);
if (ps->pss_func == POOL_SCAN_SCRUB) {
if (is_scrub) {
(void) printf(gettext("scrub repaired %s "
"in %s with %llu errors on %s"), processed_buf,
time_buf, (u_longlong_t)ps->pss_errors,
ctime(&end));
} else if (ps->pss_func == POOL_SCAN_RESILVER) {
} else if (is_resilver) {
(void) printf(gettext("resilvered %s "
"in %s with %llu errors on %s"), processed_buf,
time_buf, (u_longlong_t)ps->pss_errors,
@@ -7569,10 +7570,10 @@ print_scan_scrub_resilver_status(pool_scan_stat_t *ps)
}
return;
} else if (ps->pss_state == DSS_CANCELED) {
if (ps->pss_func == POOL_SCAN_SCRUB) {
if (is_scrub) {
(void) printf(gettext("scrub canceled on %s"),
ctime(&end));
} else if (ps->pss_func == POOL_SCAN_RESILVER) {
} else if (is_resilver) {
(void) printf(gettext("resilver canceled on %s"),
ctime(&end));
}
@@ -7582,7 +7583,7 @@ print_scan_scrub_resilver_status(pool_scan_stat_t *ps)
assert(ps->pss_state == DSS_SCANNING);
/* Scan is in progress. Resilvers can't be paused. */
if (ps->pss_func == POOL_SCAN_SCRUB) {
if (is_scrub) {
if (pause == 0) {
(void) printf(gettext("scrub in progress since %s"),
ctime(&start));
@@ -7592,7 +7593,7 @@ print_scan_scrub_resilver_status(pool_scan_stat_t *ps)
(void) printf(gettext("\tscrub started on %s"),
ctime(&start));
}
} else if (ps->pss_func == POOL_SCAN_RESILVER) {
} else if (is_resilver) {
(void) printf(gettext("resilver in progress since %s"),
ctime(&start));
}
@@ -7634,17 +7635,27 @@ print_scan_scrub_resilver_status(pool_scan_stat_t *ps)
scanned_buf, issued_buf, total_buf);
}
if (ps->pss_func == POOL_SCAN_RESILVER) {
if (is_resilver) {
(void) printf(gettext("\t%s resilvered, %.2f%% done"),
processed_buf, 100 * fraction_done);
} else if (ps->pss_func == POOL_SCAN_SCRUB) {
} else if (is_scrub) {
(void) printf(gettext("\t%s repaired, %.2f%% done"),
processed_buf, 100 * fraction_done);
}
if (pause == 0) {
/*
* Only provide an estimate iff:
* 1) the time remaining is valid, and
* 2) the issue rate exceeds 10 MB/s, and
* 3) it's either:
* a) a resilver which has started repairs, or
* b) a scrub which has entered the issue phase.
*/
if (total_secs_left != UINT64_MAX &&
issue_rate >= 10 * 1024 * 1024) {
issue_rate >= 10 * 1024 * 1024 &&
((is_resilver && ps->pss_processed > 0) ||
(is_scrub && issued > 0))) {
(void) printf(gettext(", %s to go\n"), time_buf);
} else {
(void) printf(gettext(", no estimated "