From 9691eb9fee92301869ae34f750279f93504f7db1 Mon Sep 17 00:00:00 2001
From: Brian Behlendorf <behlendorf1@llnl.gov>
Date: Wed, 1 Sep 2010 12:50:44 -0700
Subject: [PATCH] Remove scripts/common.sh

This script is now dynamically generated at configure time
from scripts/common.sh.in.  This change was made by commit
26e61dd074df64f9e1d779273efd56fa9d92cdc5 but we accidentally
kept the common.sh file around.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
---
 scripts/common.sh | 443 ----------------------------------------------
 1 file changed, 443 deletions(-)
 delete mode 100644 scripts/common.sh

diff --git a/scripts/common.sh b/scripts/common.sh
deleted file mode 100644
index 66097570d..000000000
--- a/scripts/common.sh
+++ /dev/null
@@ -1,443 +0,0 @@
-#!/bin/bash
-#
-# Common support functions for testing scripts.  If a .script-config
-# files is available it will be sourced so in-tree kernel modules and
-# utilities will be used.  If no .script-config can be found then the
-# installed kernel modules and utilities will be used.
-
-basedir="$(dirname $0)"
-
-SCRIPT_CONFIG=.script-config
-if [ -f "${basedir}/../${SCRIPT_CONFIG}" ]; then
-. "${basedir}/../${SCRIPT_CONFIG}"
-else
-MODULES=(zlib_deflate spl splat zavl znvpair zunicode zcommon zfs)
-fi
-
-PROG="<define PROG>"
-CLEANUP=
-VERBOSE=
-VERBOSE_FLAG=
-FORCE=
-FORCE_FLAG=
-DUMP_LOG=
-ERROR=
-RAID0S=()
-RAID10S=()
-RAIDZS=()
-RAIDZ2S=()
-TESTS_RUN=${TESTS_RUN:-'*'}
-TESTS_SKIP=${TESTS_SKIP:-}
-
-prefix=/usr/local
-exec_prefix=${prefix}
-libexecdir=${exec_prefix}/libexec
-pkglibexecdir=${libexecdir}/zfs
-bindir=${exec_prefix}/bin
-sbindir=${exec_prefix}/sbin
-
-ETCDIR=${ETCDIR:-/etc}
-DEVDIR=${DEVDIR:-/dev/disk/zpool}
-ZPOOLDIR=${ZPOOLDIR:-${pkglibexecdir}/zpool-config}
-ZPIOSDIR=${ZPIOSDIR:-${pkglibexecdir}/zpios-test}
-ZPIOSPROFILEDIR=${ZPIOSPROFILEDIR:-${pkglibexecdir}/zpios-profile}
-
-ZDB=${ZDB:-${sbindir}/zdb}
-ZFS=${ZFS:-${sbindir}/zfs}
-ZINJECT=${ZINJECT:-${sbindir}/zinject}
-ZPOOL=${ZPOOL:-${sbindir}/zpool}
-ZPOOL_ID=${ZPOOL_ID:-${bindir}/zpool_id}
-ZTEST=${ZTEST:-${sbindir}/ztest}
-ZPIOS=${ZPIOS:-${sbindir}/zpios}
-
-COMMON_SH=${COMMON_SH:-${pkglibexecdir}/common.sh}
-ZFS_SH=${ZFS_SH:-${pkglibexecdir}/zfs.sh}
-ZPOOL_CREATE_SH=${ZPOOL_CREATE_SH:-${pkglibexecdir}/zpool-create.sh}
-ZPIOS_SH=${ZPIOS_SH:-${pkglibexecdir}/zpios.sh}
-ZPIOS_SURVEY_SH=${ZPIOS_SURVEY_SH:-${pkglibexecdir}/zpios-survey.sh}
-
-LDMOD=${LDMOD:-/sbin/modprobe}
-LSMOD=${LSMOD:-/sbin/lsmod}
-RMMOD=${RMMOD:-/sbin/rmmod}
-INFOMOD=${INFOMOD:-/sbin/modinfo}
-LOSETUP=${LOSETUP:-/sbin/losetup}
-SYSCTL=${SYSCTL:-/sbin/sysctl}
-UDEVADM=${UDEVADM:-/sbin/udevadm}
-AWK=${AWK:-/usr/bin/awk}
-
-COLOR_BLACK="\033[0;30m"
-COLOR_DK_GRAY="\033[1;30m"
-COLOR_BLUE="\033[0;34m"
-COLOR_LT_BLUE="\033[1;34m" 
-COLOR_GREEN="\033[0;32m"
-COLOR_LT_GREEN="\033[1;32m"
-COLOR_CYAN="\033[0;36m"
-COLOR_LT_CYAN="\033[1;36m"
-COLOR_RED="\033[0;31m"
-COLOR_LT_RED="\033[1;31m"
-COLOR_PURPLE="\033[0;35m"
-COLOR_LT_PURPLE="\033[1;35m"
-COLOR_BROWN="\033[0;33m"
-COLOR_YELLOW="\033[1;33m"
-COLOR_LT_GRAY="\033[0;37m"
-COLOR_WHITE="\033[1;37m"
-COLOR_RESET="\033[0m"
-
-die() {
-	echo -e "${PROG}: $1" >&2
-	exit 1
-}
-
-msg() {
-	if [ ${VERBOSE} ]; then
-		echo "$@"
-	fi
-}
-
-pass() {
-	echo -e "${COLOR_GREEN}Pass${COLOR_RESET}"
-}
-
-fail() {
-	echo -e "${COLOR_RED}Fail${COLOR_RESET} ($1)"
-	exit $1
-}
-
-skip() {
-	echo -e "${COLOR_BROWN}Skip${COLOR_RESET}"
-}
-
-spl_dump_log() {
-	${SYSCTL} -w kernel.spl.debug.dump=1 &>/dev/null
-	local NAME=`dmesg | tail -n 1 | cut -f5 -d' '`
-	${SPLBUILD}/cmd/spl ${NAME} >${NAME}.log
-	echo
-	echo "Dumped debug log: ${NAME}.log"
-	tail -n1 ${NAME}.log
-	echo
-	return 0
-}
-
-check_modules() {
-	local LOADED_MODULES=()
-	local MISSING_MODULES=()
-
-	for MOD in ${MODULES[*]}; do
-		local NAME=`basename $MOD .ko`
-
-		if ${LSMOD} | egrep -q "^${NAME}"; then
-			LOADED_MODULES=(${NAME} ${LOADED_MODULES[*]})
-		fi
-
-		if [ ${INFOMOD} ${MOD} 2>/dev/null ]; then
-			MISSING_MODULES=("\t${MOD}\n" ${MISSING_MODULES[*]})
-		fi
-	done
-
-	if [ ${#LOADED_MODULES[*]} -gt 0 ]; then
-		ERROR="Unload these modules with '${PROG} -u':\n"
-		ERROR="${ERROR}${LOADED_MODULES[*]}"
-		return 1
-	fi
-
-	if [ ${#MISSING_MODULES[*]} -gt 0 ]; then
-		ERROR="The following modules can not be found,"
-		ERROR="${ERROR} ensure your source trees are built:\n"
-		ERROR="${ERROR}${MISSING_MODULES[*]}"
-		return 1
-	fi
-
-	return 0
-}
-
-load_module() {
-	local NAME=`basename $1 .ko`
-
-	if [ ${VERBOSE} ]; then
-		echo "Loading ${NAME} ($@)"
-	fi
-
-	${LDMOD} $* || ERROR="Failed to load $1" return 1
-
-	return 0
-}
-
-load_modules() {
-	mkdir -p /etc/zfs
-
-	for MOD in ${MODULES[*]}; do
-		local NAME=`basename ${MOD} .ko`
-		local VALUE=
-
-		for OPT in "$@"; do
-			OPT_NAME=`echo ${OPT} | cut -f1 -d'='`
-
-			if [ ${NAME} = "${OPT_NAME}" ]; then
-				VALUE=`echo ${OPT} | cut -f2- -d'='`
-			fi
-		done
-
-		load_module ${MOD} ${VALUE} || return 1
-	done
-
-	if [ ${VERBOSE} ]; then
-		echo "Successfully loaded ZFS module stack"
-	fi
-
-	return 0
-}
-
-unload_module() {
-	local NAME=`basename $1 .ko`
-
-	if [ ${VERBOSE} ]; then
-		echo "Unloading ${NAME} ($@)"
-	fi
-
-	${RMMOD} ${NAME} || ERROR="Failed to unload ${NAME}" return 1
-
-	return 0
-}
-
-unload_modules() {
-	local MODULES_REVERSE=( $(echo ${MODULES[@]} |
-		${AWK} '{for (i=NF;i>=1;i--) printf $i" "} END{print ""}') )
-
-	for MOD in ${MODULES_REVERSE[*]}; do
-		local NAME=`basename ${MOD} .ko`
-		local USE_COUNT=`${LSMOD} |
-				egrep "^${NAME} "| ${AWK} '{print $3}'`
-
-		if [ "${USE_COUNT}" = 0 ] ; then
-
-			if [ "${DUMP_LOG}" -a ${NAME} = "spl" ]; then
-				spl_dump_log
-			fi
-
-			unload_module ${MOD} || return 1
-		fi
-	done
-
-	if [ ${VERBOSE} ]; then
-		echo "Successfully unloaded ZFS module stack"
-	fi
-
-	return 0
-}
-
-unused_loop_device() {
-	for DEVICE in `ls -1 /dev/loop*`; do
-		${LOSETUP} ${DEVICE} &>/dev/null
-		if [ $? -ne 0 ]; then
-			echo ${DEVICE}
-			return
-		fi
-	done
-
-	die "Error: Unable to find unused loopback device"
-}
-
-#
-# This can be slightly dangerous because the loop devices we are
-# cleanup up may not be ours.  However, if the devices are currently
-# in use we will not be able to remove them, and we only remove
-# devices which include 'zpool' in the name.  So any damage we might
-# do should be limited to other zfs related testing.
-#
-cleanup_loop_devices() {
-	local TMP_FILE=`mktemp`
-
-	${LOSETUP} -a | tr -d '()' >${TMP_FILE}
-	${AWK} -F":" -v losetup="$LOSETUP" \
-	    '/zpool/ { system("losetup -d "$1) }' ${TMP_FILE}
-	${AWK} -F" " '/zpool/ { system("rm -f "$3) }' ${TMP_FILE}
-
-	rm -f ${TMP_FILE}
-}
-
-#
-# The following udev helper functions assume that the provided
-# udev rules file will create a /dev/disk/zpool/<CHANNEL><RANK>
-# disk mapping.  In this mapping each CHANNEL is represented by
-# the letters a-z, and the RANK is represented by the numbers
-# 1-n.  A CHANNEL should identify a group of RANKS which are all
-# attached to a single controller, each RANK represents a disk.
-# This provides a simply mechanism to locate a specific drive
-# given a known hardware configuration.
-#
-udev_setup() {
-	local SRC_PATH=$1
-
-	# When running in tree manually contruct symlinks in tree to
-	# the proper devices.  Symlinks are installed for all entires
-	# in the config file regardless of if that device actually
-	# exists.  When installed as a package udev can be relied on for
-	# this and it will only create links for devices which exist.
-	if [ ${INTREE} ]; then
-		PWD=`pwd`
-		mkdir -p ${DEVDIR}/
-		cd ${DEVDIR}/
-		${AWK} '!/^#/ && /./ { system( \
-			"ln -f -s /dev/disk/by-path/"$2" "$1";" \
-			"ln -f -s /dev/disk/by-path/"$2"-part1 "$1"p1;" \
-			"ln -f -s /dev/disk/by-path/"$2"-part9 "$1"p9;" \
-			) }' $SRC_PATH
-		cd ${PWD}
-	else
-		DST_FILE=`basename ${SRC_PATH} | cut -f1-2 -d'.'`
-		DST_PATH=/etc/zfs/${DST_FILE}
-
-		if [ -e ${DST_PATH} ]; then
-			die "Error: Config ${DST_PATH} already exists"
-		fi
-
-		cp ${SRC_PATH} ${DST_PATH}
-
-		if [ -f ${UDEVADM} ]; then
-			${UDEVADM} trigger
-			${UDEVADM} settle
-		else
-			/sbin/udevtrigger
-			/sbin/udevsettle
-		fi
-	fi
-
-	return 0
-}
-
-udev_cleanup() {
-	local SRC_PATH=$1
-
-	if [ ${INTREE} ]; then
-		PWD=`pwd`
-		cd ${DEVDIR}/
-		${AWK} '!/^#/ && /./ { system( \
-			"rm -f "$1" "$1"p1 "$1"p9") }' $SRC_PATH
-		cd ${PWD}
-	fi
-
-	return 0
-}
-
-udev_cr2d() {
-	local CHANNEL=`echo "obase=16; $1+96" | bc`
-	local RANK=$2
-
-	printf "\x${CHANNEL}${RANK}"
-}
-
-udev_raid0_setup() {
-	local RANKS=$1
-	local CHANNELS=$2
-	local IDX=0
-
-	RAID0S=()
-	for RANK in `seq 1 ${RANKS}`; do
-		for CHANNEL in `seq 1 ${CHANNELS}`; do
-			DISK=`udev_cr2d ${CHANNEL} ${RANK}`
-			RAID0S[${IDX}]="${DEVDIR}/${DISK}"
-			let IDX=IDX+1
-		done
-	done
-
-	return 0
-}
-
-udev_raid10_setup() {
-	local RANKS=$1
-	local CHANNELS=$2
-	local IDX=0
-
-	RAID10S=()
-	for RANK in `seq 1 ${RANKS}`; do
-		for CHANNEL1 in `seq 1 2 ${CHANNELS}`; do
-			let CHANNEL2=CHANNEL1+1
-			DISK1=`udev_cr2d ${CHANNEL1} ${RANK}`
-			DISK2=`udev_cr2d ${CHANNEL2} ${RANK}`
-			GROUP="${DEVDIR}/${DISK1} ${DEVDIR}/${DISK2}"
-			RAID10S[${IDX}]="mirror ${GROUP}"
-			let IDX=IDX+1
-		done
-	done
-
-	return 0
-}
-
-udev_raidz_setup() {
-	local RANKS=$1
-	local CHANNELS=$2
-
-	RAIDZS=()
-	for RANK in `seq 1 ${RANKS}`; do
-		RAIDZ=("raidz")
-
-		for CHANNEL in `seq 1 ${CHANNELS}`; do
-			DISK=`udev_cr2d ${CHANNEL} ${RANK}`
-			RAIDZ[${CHANNEL}]="${DEVDIR}/${DISK}"
-		done
-
-		RAIDZS[${RANK}]="${RAIDZ[*]}"
-	done
-
-	return 0
-}
-
-udev_raidz2_setup() {
-	local RANKS=$1
-	local CHANNELS=$2
-
-	RAIDZ2S=()
-	for RANK in `seq 1 ${RANKS}`; do
-		RAIDZ2=("raidz2")
-
-		for CHANNEL in `seq 1 ${CHANNELS}`; do
-			DISK=`udev_cr2d ${CHANNEL} ${RANK}`
-			RAIDZ2[${CHANNEL}]="${DEVDIR}/${DISK}"
-		done
-
-		RAIDZ2S[${RANK}]="${RAIDZ2[*]}"
-	done
-
-	return 0
-}
-
-run_one_test() {
-	local TEST_NUM=$1
-	local TEST_NAME=$2
-
-	printf "%-4d %-36s " ${TEST_NUM} "${TEST_NAME}"
-	test_${TEST_NUM}
-}
-
-skip_one_test() {
-	local TEST_NUM=$1
-	local TEST_NAME=$2
-
-	printf "%-4d %-36s " ${TEST_NUM} "${TEST_NAME}"
-	skip
-}
-
-run_test() {
-	local TEST_NUM=$1
-	local TEST_NAME=$2
-
-	for i in ${TESTS_SKIP[@]}; do
-		if [[ $i == ${TEST_NUM} ]] ; then
-			skip_one_test ${TEST_NUM} "${TEST_NAME}"
-			return 0
-		fi
-	done
-
-	if [ "${TESTS_RUN[0]}" = "*" ]; then
-		run_one_test ${TEST_NUM} "${TEST_NAME}"
-	else
-		for i in ${TESTS_RUN[@]}; do
-			if [[ $i == ${TEST_NUM} ]] ; then
-				run_one_test ${TEST_NUM} "${TEST_NAME}"
-				return 0
-			fi
-		done
-
-		skip_one_test ${TEST_NUM} "${TEST_NAME}"
-	fi
-}