Fix typos in tests/

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #9246

tests/zfs-tests/tests/functional/delegate/zfs_allow_009_neg.ksh

@@ -36,7 +36,7 @@
 #	zfs allow can deal with invalid arguments.(Invalid options or combination)
 #
 # STRATEGY:
-#	1. Verify invalid argumets will cause error.
+#	1. Verify invalid arguments will cause error.
 #	2. Verify non-optional argument was missing will cause error.
 #	3. Verify invalid options cause error.
 #

tests/zfs-tests/tests/functional/fault/auto_online_001_pos.ksh

@@ -129,7 +129,7 @@ do
 	typeset -i timeout=0
 	while true; do
 		if ((timeout == $MAXTIMEOUT)); then
-			log_fail "Timeout occured"
+			log_fail "Timeout occurred"
 		fi
 		((timeout++))
 

tests/zfs-tests/tests/functional/fault/auto_spare_multiple.ksh

@@ -116,7 +116,7 @@ for type in "mirror" "raidz" "raidz2" "raidz3"; do
 done
 
 # Rinse and repeat, this time faulting both devices at the same time
-# NOTE: "raidz" is exluded since it cannot survive 2 faulted devices
+# NOTE: "raidz" is excluded since it cannot survive 2 faulted devices
 # NOTE: "mirror" is a 4-way mirror here and should survive this test
 for type in "mirror" "raidz2" "raidz3"; do
 	# 1. Create a pool with two hot spares

tests/zfs-tests/tests/functional/history/history_005_neg.ksh

@@ -42,9 +42,9 @@
 #		zpool iostat
 #
 # STRATEGY:
-#	1. Create a test pool.
+#	1. Create a test pool
 #	2. Separately invoke zpool list|status|iostat
-#	3. Verify they was not recored in pool history.
+#	3. Verify they were not recorded in pool history
 #
 
 verify_runnable "global"

tests/zfs-tests/tests/functional/history/history_006_neg.ksh

@@ -40,7 +40,7 @@
 # STRATEGY:
 #	1. Create a test pool.
 #	2. Separately invoke zfs list|get|holds|mount|unmount|share|unshare|send
-#	3. Verify they were not recored in pool history.
+#	3. Verify they were not recorded in pool history.
 #
 
 verify_runnable "global"

tests/zfs-tests/tests/functional/history/history_007_pos.ksh

@@ -83,7 +83,7 @@ for arch in "i386" "sparc"; do
 	TZ=$TIMEZONE zpool history $migratedpoolname | grep -v "^$" \
 	    >$migrated_cmds_f
 	RET=$?
-	(( $RET != 0 )) && log_fail "zpool histroy $migratedpoolname fails."
+	(( $RET != 0 )) && log_fail "zpool history $migratedpoolname fails."
 
 	# The migrated history file should differ with original history file on
 	# two commands -- 'export' and 'import', which are included in migrated

tests/zfs-tests/tests/functional/history/history_common.kshlib

@@ -224,7 +224,7 @@ function verify_allow
 
 	#
 	# Here, we determine three things:
-	# - Whether we're operating on a set or an indivdual permission (which
+	# - Whether we're operating on a set or an individual permission (which
 	#   dictates the case of the first character in the code)
 	# - The name of the dataset we're operating on.
 	# - Whether the operation applies locally or to descendent datasets (or

tests/zfs-tests/tests/functional/inuse/inuse_001_pos.ksh

@@ -80,7 +80,7 @@ dumpdev=`dumpadm | grep "Dump device" | awk '{print $3}'`
 [[ -z "$dumpdev" ]] && log_untested "No dump device has been configured"
 
 [[ "$dumpdev" != "$diskslice" ]] && \
-    log_untested "Dump device has not been been configured to $diskslice"
+    log_untested "Dump device has not been configured to $diskslice"
 
 log_note "Attempt to zpool the dump device"
 unset NOINUSE_CHECK

tests/zfs-tests/tests/functional/inuse/inuse_004_pos.ksh

@@ -48,8 +48,8 @@ verify_runnable "global"
 function cleanup
 {
 	#
-	# Essentailly this is the default_cleanup routine but I cannot get it
+	# Essentially this is the default_cleanup routine but I cannot get it
-	# to work correctly.  So its reproduced below.  Still need to full
+	# to work correctly.  So its reproduced below.  Still need to fully
 	# understand why default_cleanup does not work correctly from here.
 	#
         log_must zfs umount $TESTPOOL/$TESTFS

tests/zfs-tests/tests/functional/inuse/inuse_008_pos.ksh

@@ -69,7 +69,7 @@ function verify_assertion #slices
 		echo "y" | newfs -v $t > /dev/null 2>&1
 		(( $? !=0 )) && \
 			log_fail "newfs over exported pool " \
-				"failes unexpected."
+				"fails unexpectedly."
 	done
 
 	return 0

tests/zfs-tests/tests/functional/large_files/large_files_001_pos.ksh

@@ -38,7 +38,7 @@
 # STRATEGY:
 # 1. largest_file will write to a file and increase its size
 # to the maximum allowable.
-# 2. The last byte of the file should be accessbile without error.
+# 2. The last byte of the file should be accessible without error.
 # 3. Writing beyond the maximum file size generates an 'errno' of
 # EFBIG.
 #

tests/zfs-tests/tests/functional/mmap/mmap_write_001_pos.ksh

@@ -33,7 +33,7 @@
 
 #
 # DESCRIPTION:
-# Writing to a file and mmaping that file at the
+# Writing to a file and mmapping that file at the
 # same time does not result in a deadlock.
 #
 # STRATEGY:

tests/zfs-tests/tests/functional/mmp/mmp_on_uberblocks.ksh

@@ -66,11 +66,11 @@ UBER_CHANGES=$(count_mmp_writes $TESTPOOL 10)
 log_note "Uberblock changed $UBER_CHANGES times"
 
 if [ $UBER_CHANGES -lt $MIN_UB_WRITES ]; then
-	log_fail "Fewer uberblock writes occured than expected ($EXPECTED)"
+	log_fail "Fewer uberblock writes occurred than expected ($EXPECTED)"
 fi
 
 if [ $UBER_CHANGES -gt $MAX_UB_WRITES ]; then
-	log_fail "More uberblock writes occured than expected ($EXPECTED)"
+	log_fail "More uberblock writes occurred than expected ($EXPECTED)"
 fi
 
 log_must set_tunable64 zfs_multihost_interval $MMP_INTERVAL_MIN

tests/zfs-tests/tests/functional/no_space/enospc_df.ksh

@@ -58,7 +58,7 @@ log_must zfs umount $TESTPOOL/$TESTFS
 
 # Ensure the pool root filesystem shows in df output.
 # If the pool was full (available == 0) and the pool
-# root filesytem had very little in it (used < 1 block),
+# root filesystem had very little in it (used < 1 block),
 # the size reported to df was zero (issue #8253) and
 # df skipped the filesystem in its output.
 log_must eval "df -h | grep $TESTPOOL"

tests/zfs-tests/tests/functional/nopwrite/nopwrite_sync.ksh

@@ -24,7 +24,7 @@
 #
 # Strategy:
 # 1. Create an origin fs with compression and sha256.
-# 2. Clone origin such that it inherits the properies.
+# 2. Clone origin such that it inherits the properties.
 # 3. Use dd with the sync flag to test the sync write path.
 #