c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-12-26 03:09:34 +03:00
Code Issues Packages Projects Releases Wiki Activity

zvol: Support blk-mq for better performance

Browse Source 
Add support for the kernel's block multiqueue (blk-mq) interface in
the zvol block driver.  blk-mq creates multiple request queues on
different CPUs rather than having a single request queue.  This can
improve zvol performance with multithreaded reads/writes.

This implementation uses the blk-mq interfaces on 4.13 or newer
kernels.  Building against older kernels will fall back to the
older BIO interfaces.

Note that you must set the `zvol_use_blk_mq` module param to
enable the blk-mq API.  It is disabled by default.

In addition, this commit lets the zvol blk-mq layer process whole
`struct request` IOs at a time, rather than breaking them down
into their individual BIOs.  This reduces dbuf lock contention
and overhead versus the legacy zvol submit_bio() codepath.

	sequential dd to one zvol, 8k volblocksize, no O_DIRECT:

	legacy submit_bio()     292MB/s write  453MB/s read
	this commit             453MB/s write  885MB/s read

It also introduces a new `zvol_blk_mq_chunks_per_thread` module
parameter. This parameter represents how many volblocksize'd chunks
to process per each zvol thread.  It can be used to tune your zvols
for better read vs write performance (higher values favor write,
lower favor read).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #13148
Issue #12483
This commit is contained in:
Tony Hutter 2022-06-09 07:10:38 -07:00 committed by GitHub
parent 985c33b132
commit 6f73d02168
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
18 changed files with 1441 additions and 152 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
config/kernel-blk-queue.m4
View File

@ -359,6 +359,36 @@ AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS], [
]) ])
]) ])
dnl #
dnl # See if kernel supports block multi-queue and blk_status_t.
dnl # blk_status_t represents the new status codes introduced in the 4.13
dnl # kernel patch:
dnl #
dnl # block: introduce new block status code type
dnl #
dnl # We do not currently support the "old" block multi-queue interfaces from
dnl # prior kernels.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_MQ], [
ZFS_LINUX_TEST_SRC([blk_mq], [
#include <linux/blk-mq.h>
], [
struct blk_mq_tag_set tag_set __attribute__ ((unused)) = {0};
(void) blk_mq_alloc_tag_set(&tag_set);
return BLK_STS_OK;
], [])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_MQ], [
AC_MSG_CHECKING([whether block multiqueue with blk_status_t is available])
ZFS_LINUX_TEST_RESULT([blk_mq], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_MQ, 1, [block multiqueue is available])
], [
AC_MSG_RESULT(no)
])
])
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE], [ AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE], [
ZFS_AC_KERNEL_SRC_BLK_QUEUE_PLUG ZFS_AC_KERNEL_SRC_BLK_QUEUE_PLUG
ZFS_AC_KERNEL_SRC_BLK_QUEUE_BDI ZFS_AC_KERNEL_SRC_BLK_QUEUE_BDI
@ -370,6 +400,7 @@ AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE], [
ZFS_AC_KERNEL_SRC_BLK_QUEUE_FLUSH ZFS_AC_KERNEL_SRC_BLK_QUEUE_FLUSH
ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_HW_SECTORS ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_HW_SECTORS
ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_SEGMENTS ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_SEGMENTS
ZFS_AC_KERNEL_SRC_BLK_MQ
]) ])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE], [ AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE], [
@ -383,4 +414,5 @@ AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE], [
ZFS_AC_KERNEL_BLK_QUEUE_FLUSH ZFS_AC_KERNEL_BLK_QUEUE_FLUSH
ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS
ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS
ZFS_AC_KERNEL_BLK_MQ
]) ])

111
include/os/linux/kernel/linux/blkdev_compat.h
View File

@ -34,6 +34,11 @@
#include <linux/hdreg.h> #include <linux/hdreg.h>
#include <linux/major.h> #include <linux/major.h>
#include <linux/msdos_fs.h> /* for SECTOR_* */ #include <linux/msdos_fs.h> /* for SECTOR_* */
#include <linux/bio.h>
#ifdef HAVE_BLK_MQ
#include <linux/blk-mq.h>
#endif
#ifndef HAVE_BLK_QUEUE_FLAG_SET #ifndef HAVE_BLK_QUEUE_FLAG_SET
static inline void static inline void
@ -608,4 +613,110 @@ blk_generic_alloc_queue(make_request_fn make_request, int node_id)
} }
#endif /* !HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS */ #endif /* !HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS */
/*
* All the io_*() helper functions below can operate on a bio, or a rq, but
* not both. The older submit_bio() codepath will pass a bio, and the
* newer blk-mq codepath will pass a rq.
*/
static inline int
io_data_dir(struct bio *bio, struct request *rq)
{
#ifdef HAVE_BLK_MQ
if (rq != NULL) {
if (op_is_write(req_op(rq))) {
return (WRITE);
} else {
return (READ);
}
}
#else
ASSERT3P(rq, ==, NULL);
#endif
return (bio_data_dir(bio));
}
static inline int
io_is_flush(struct bio *bio, struct request *rq)
{
#ifdef HAVE_BLK_MQ
if (rq != NULL)
return (req_op(rq) == REQ_OP_FLUSH);
#else
ASSERT3P(rq, ==, NULL);
#endif
return (bio_is_flush(bio));
}
static inline int
io_is_discard(struct bio *bio, struct request *rq)
{
#ifdef HAVE_BLK_MQ
if (rq != NULL)
return (req_op(rq) == REQ_OP_DISCARD);
#else
ASSERT3P(rq, ==, NULL);
#endif
return (bio_is_discard(bio));
}
static inline int
io_is_secure_erase(struct bio *bio, struct request *rq)
{
#ifdef HAVE_BLK_MQ
if (rq != NULL)
return (req_op(rq) == REQ_OP_SECURE_ERASE);
#else
ASSERT3P(rq, ==, NULL);
#endif
return (bio_is_secure_erase(bio));
}
static inline int
io_is_fua(struct bio *bio, struct request *rq)
{
#ifdef HAVE_BLK_MQ
if (rq != NULL)
return (rq->cmd_flags & REQ_FUA);
#else
ASSERT3P(rq, ==, NULL);
#endif
return (bio_is_fua(bio));
}
static inline uint64_t
io_offset(struct bio *bio, struct request *rq)
{
#ifdef HAVE_BLK_MQ
if (rq != NULL)
return (blk_rq_pos(rq) << 9);
#else
ASSERT3P(rq, ==, NULL);
#endif
return (BIO_BI_SECTOR(bio) << 9);
}
static inline uint64_t
io_size(struct bio *bio, struct request *rq)
{
#ifdef HAVE_BLK_MQ
if (rq != NULL)
return (blk_rq_bytes(rq));
#else
ASSERT3P(rq, ==, NULL);
#endif
return (BIO_BI_SIZE(bio));
}
static inline int
io_has_data(struct bio *bio, struct request *rq)
{
#ifdef HAVE_BLK_MQ
if (rq != NULL)
return (bio_has_data(rq->bio));
#else
ASSERT3P(rq, ==, NULL);
#endif
return (bio_has_data(bio));
}
#endif /* _ZFS_BLKDEV_H */ #endif /* _ZFS_BLKDEV_H */

35
include/os/linux/spl/sys/uio.h
View File

@ -69,9 +69,20 @@ typedef struct zfs_uio {
uint16_t uio_fmode; uint16_t uio_fmode;
uint16_t uio_extflg; uint16_t uio_extflg;
ssize_t uio_resid; ssize_t uio_resid;
size_t uio_skip; size_t uio_skip;
struct request *rq;
/*
* Used for saving rq_for_each_segment() state between calls
* to zfs_uiomove_bvec_rq().
*/
struct req_iterator iter;
struct bio_vec bv;
} zfs_uio_t; } zfs_uio_t;
#define zfs_uio_segflg(u) (u)->uio_segflg #define zfs_uio_segflg(u) (u)->uio_segflg
#define zfs_uio_offset(u) (u)->uio_loffset #define zfs_uio_offset(u) (u)->uio_loffset
#define zfs_uio_resid(u) (u)->uio_resid #define zfs_uio_resid(u) (u)->uio_resid
@ -116,17 +127,33 @@ zfs_uio_iovec_init(zfs_uio_t *uio, const struct iovec *iov,
} }
static inline void static inline void
zfs_uio_bvec_init(zfs_uio_t *uio, struct bio *bio) zfs_uio_bvec_init(zfs_uio_t *uio, struct bio *bio, struct request *rq)
{ {
uio->uio_bvec = &bio->bi_io_vec[BIO_BI_IDX(bio)]; /* Either bio or rq will be set, but not both */
ASSERT3P(uio, !=, bio);
if (bio) {
uio->uio_iovcnt = bio->bi_vcnt - BIO_BI_IDX(bio); uio->uio_iovcnt = bio->bi_vcnt - BIO_BI_IDX(bio);
uio->uio_loffset = BIO_BI_SECTOR(bio) << 9; uio->uio_bvec = &bio->bi_io_vec[BIO_BI_IDX(bio)];
} else {
uio->uio_bvec = NULL;
uio->uio_iovcnt = 0;
memset(&uio->iter, 0, sizeof (uio->iter));
}
uio->uio_loffset = io_offset(bio, rq);
uio->uio_segflg = UIO_BVEC; uio->uio_segflg = UIO_BVEC;
uio->uio_fault_disable = B_FALSE; uio->uio_fault_disable = B_FALSE;
uio->uio_fmode = 0; uio->uio_fmode = 0;
uio->uio_extflg = 0; uio->uio_extflg = 0;
uio->uio_resid = BIO_BI_SIZE(bio); uio->uio_resid = io_size(bio, rq);
if (bio) {
uio->uio_skip = BIO_BI_SKIP(bio); uio->uio_skip = BIO_BI_SKIP(bio);
} else {
uio->uio_skip = 0;
}
uio->rq = rq;
} }
#if defined(HAVE_VFS_IOV_ITER) #if defined(HAVE_VFS_IOV_ITER)

69
man/man4/zfs.4
View File

@ -2248,9 +2248,74 @@ for each I/O submitter.
When unset, requests are handled asynchronously by a thread pool. When unset, requests are handled asynchronously by a thread pool.
The number of requests which can be handled concurrently is controlled by The number of requests which can be handled concurrently is controlled by
.Sy zvol_threads . .Sy zvol_threads .
.Sy zvol_request_sync
is ignored when running on a kernel that supports block multiqueue
.Pq Li blk-mq .
. .
.It Sy zvol_threads Ns = Ns Sy 32 Pq uint .It Sy zvol_threads Ns = Ns Sy 0 Pq uint
Max number of threads which can handle zvol I/O requests concurrently. The number of system wide threads to use for processing zvol block IOs.
If
.Sy 0
(the default) then internally set
.Sy zvol_threads
to the number of CPUs present or 32 (whichever is greater).
.
.It Sy zvol_blk_mq_threads Ns = Ns Sy 0 Pq uint
The number of threads per zvol to use for queuing IO requests.
This parameter will only appear if your kernel supports
.Li blk-mq
and is only read and assigned to a zvol at zvol load time.
If
.Sy 0
(the default) then internally set
.Sy zvol_blk_mq_threads
to the number of CPUs present.
.
.It Sy zvol_use_blk_mq Ns = Ns Sy 0 Ns | Ns 1 Pq uint
Set to
.Sy 1
to use the
.Li blk-mq
API for zvols.
Set to
.Sy 0
(the default) to use the legacy zvol APIs.
This setting can give better or worse zvol performance depending on
the workload.
This parameter will only appear if your kernel supports
.Li blk-mq
and is only read and assigned to a zvol at zvol load time.
.
.It Sy zvol_blk_mq_blocks_per_thread Ns = Ns Sy 8 Pq uint
If
.Sy zvol_use_blk_mq
is enabled, then process this number of
.Sy volblocksize Ns -sized blocks per zvol thread.
This tunable can be use to favor better performance for zvol reads (lower
values) or writes (higher values).
If set to
.Sy 0 ,
then the zvol layer will process the maximum number of blocks
per thread that it can.
This parameter will only appear if your kernel supports
.Li blk-mq
and is only applied at each zvol's load time.
.
.It Sy zvol_blk_mq_queue_depth Ns = Ns Sy 0 Pq uint
The queue_depth value for the zvol
.Li blk-mq
interface.
This parameter will only appear if your kernel supports
.Li blk-mq
and is only applied at each zvol's load time.
If
.Sy 0
(the default) then use the kernel's default queue depth.
Values are clamped to the kernel's
.Dv BLKDEV_MIN_RQ
and
.Dv BLKDEV_MAX_RQ Ns / Ns Dv BLKDEV_DEFAULT_RQ
limits.
. .
.It Sy zvol_volmode Ns = Ns Sy 1 Pq uint .It Sy zvol_volmode Ns = Ns Sy 1 Pq uint
Defines zvol block devices behaviour when Defines zvol block devices behaviour when

154
module/os/linux/zfs/zfs_uio.c
View File

@ -126,7 +126,7 @@ zfs_uiomove_iov(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
} }
static int static int
zfs_uiomove_bvec(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio) zfs_uiomove_bvec_impl(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
{ {
const struct bio_vec *bv = uio->uio_bvec; const struct bio_vec *bv = uio->uio_bvec;
size_t skip = uio->uio_skip; size_t skip = uio->uio_skip;
@ -137,10 +137,13 @@ zfs_uiomove_bvec(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
cnt = MIN(bv->bv_len - skip, n); cnt = MIN(bv->bv_len - skip, n);
paddr = zfs_kmap_atomic(bv->bv_page); paddr = zfs_kmap_atomic(bv->bv_page);
if (rw == UIO_READ) if (rw == UIO_READ) {
/* Copy from buffer 'p' to the bvec data */
memcpy(paddr + bv->bv_offset + skip, p, cnt); memcpy(paddr + bv->bv_offset + skip, p, cnt);
else } else {
/* Copy from bvec data to buffer 'p' */
memcpy(p, paddr + bv->bv_offset + skip, cnt); memcpy(p, paddr + bv->bv_offset + skip, cnt);
}
zfs_kunmap_atomic(paddr); zfs_kunmap_atomic(paddr);
skip += cnt; skip += cnt;
@ -158,6 +161,141 @@ zfs_uiomove_bvec(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
return (0); return (0);
} }
#ifdef HAVE_BLK_MQ
static void
zfs_copy_bvec(void *p, size_t skip, size_t cnt, zfs_uio_rw_t rw,
struct bio_vec *bv)
{
void *paddr;
paddr = zfs_kmap_atomic(bv->bv_page);
if (rw == UIO_READ) {
/* Copy from buffer 'p' to the bvec data */
memcpy(paddr + bv->bv_offset + skip, p, cnt);
} else {
/* Copy from bvec data to buffer 'p' */
memcpy(p, paddr + bv->bv_offset + skip, cnt);
}
zfs_kunmap_atomic(paddr);
}
/*
* Copy 'n' bytes of data between the buffer p[] and the data represented
* by the request in the uio.
*/
static int
zfs_uiomove_bvec_rq(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
{
struct request *rq = uio->rq;
struct bio_vec bv;
struct req_iterator iter;
size_t this_seg_start; /* logical offset */
size_t this_seg_end; /* logical offset */
size_t skip_in_seg;
size_t copy_from_seg;
size_t orig_loffset;
int copied = 0;
/*
* Get the original logical offset of this entire request (because
* uio->uio_loffset will be modified over time).
*/
orig_loffset = io_offset(NULL, rq);
this_seg_start = orig_loffset;
rq_for_each_segment(bv, rq, iter) {
if (uio->iter.bio) {
/*
* If uio->iter.bio is present, then we know we've saved
* uio->iter from a previous call to this function, and
* we can skip ahead in this rq_for_each_segment() loop
* to where we last left off. That way, we don't need
* to iterate over tons of segments we've already
* processed - we can just restore the "saved state".
*/
iter = uio->iter;
bv = uio->bv;
this_seg_start = uio->uio_loffset;
memset(&uio->iter, 0, sizeof (uio->iter));
continue;
}
/*
* Lookup what the logical offset of the last byte of this
* segment is.
*/
this_seg_end = this_seg_start + bv.bv_len - 1;
/*
* We only need to operate on segments that have data we're
* copying.
*/
if (uio->uio_loffset >= this_seg_start &&
uio->uio_loffset <= this_seg_end) {
/*
* Some, or all, of the data in this segment needs to be
* copied.
*/
/*
* We may be not be copying from the first byte in the
* segment. Figure out how many bytes to skip copying
* from the beginning of this segment.
*/
skip_in_seg = uio->uio_loffset - this_seg_start;
/*
* Calculate the total number of bytes from this
* segment that we will be copying.
*/
copy_from_seg = MIN(bv.bv_len - skip_in_seg, n);
/* Copy the bytes */
zfs_copy_bvec(p, skip_in_seg, copy_from_seg, rw, &bv);
p = ((char *)p) + copy_from_seg;
n -= copy_from_seg;
uio->uio_resid -= copy_from_seg;
uio->uio_loffset += copy_from_seg;
copied = 1; /* We copied some data */
}
if (n == 0) {
/*
* All done copying. Save our 'iter' value to the uio.
* This allows us to "save our state" and skip ahead in
* the rq_for_each_segment() loop the next time we call
* call zfs_uiomove_bvec_rq() on this uio (which we
* will be doing for any remaining data in the uio).
*/
uio->iter = iter; /* make a copy of the struct data */
uio->bv = bv;
return (0);
}
this_seg_start = this_seg_end + 1;
}
if (!copied) {
/* Didn't copy anything */
uio->uio_resid = 0;
}
return (0);
}
#endif
static int
zfs_uiomove_bvec(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio)
{
#ifdef HAVE_BLK_MQ
if (uio->rq != NULL)
return (zfs_uiomove_bvec_rq(p, n, rw, uio));
#else
ASSERT3P(uio->rq, ==, NULL);
#endif
return (zfs_uiomove_bvec_impl(p, n, rw, uio));
}
#if defined(HAVE_VFS_IOV_ITER) #if defined(HAVE_VFS_IOV_ITER)
static int static int
zfs_uiomove_iter(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio, zfs_uiomove_iter(void *p, size_t n, zfs_uio_rw_t rw, zfs_uio_t *uio,
@ -300,8 +438,14 @@ zfs_uioskip(zfs_uio_t *uio, size_t n)
{ {
if (n > uio->uio_resid) if (n > uio->uio_resid)
return; return;
/*
if (uio->uio_segflg == UIO_BVEC) { * When using a uio with a struct request, we simply
* use uio_loffset as a pointer to the next logical byte to
* copy in the request. We don't have to do any fancy
* accounting with uio_bvec/uio_iovcnt since we don't use
* them.
*/
if (uio->uio_segflg == UIO_BVEC && uio->rq == NULL) {
uio->uio_skip += n; uio->uio_skip += n;
while (uio->uio_iovcnt && while (uio->uio_iovcnt &&
uio->uio_skip >= uio->uio_bvec->bv_len) { uio->uio_skip >= uio->uio_bvec->bv_len) {

630
module/os/linux/zfs/zvol_os.c
View File

@ -41,20 +41,77 @@
#include <linux/blkdev_compat.h> #include <linux/blkdev_compat.h>
#include <linux/task_io_accounting_ops.h> #include <linux/task_io_accounting_ops.h>
#ifdef HAVE_BLK_MQ
#include <linux/blk-mq.h>
#endif
static void zvol_request_impl(zvol_state_t *zv, struct bio *bio,
struct request *rq, boolean_t force_sync);
static unsigned int zvol_major = ZVOL_MAJOR; static unsigned int zvol_major = ZVOL_MAJOR;
static unsigned int zvol_request_sync = 0; static unsigned int zvol_request_sync = 0;
static unsigned int zvol_prefetch_bytes = (128 * 1024); static unsigned int zvol_prefetch_bytes = (128 * 1024);
static unsigned long zvol_max_discard_blocks = 16384; static unsigned long zvol_max_discard_blocks = 16384;
static unsigned int zvol_threads = 32;
#ifndef HAVE_BLKDEV_GET_ERESTARTSYS #ifndef HAVE_BLKDEV_GET_ERESTARTSYS
static const unsigned int zvol_open_timeout_ms = 1000; static const unsigned int zvol_open_timeout_ms = 1000;
#endif #endif
static unsigned int zvol_threads = 0;
#ifdef HAVE_BLK_MQ
static unsigned int zvol_blk_mq_threads = 0;
static unsigned int zvol_blk_mq_actual_threads;
static boolean_t zvol_use_blk_mq = B_FALSE;
/*
* The maximum number of volblocksize blocks to process per thread. Typically,
* write heavy workloads preform better with higher values here, and read
* heavy workloads preform better with lower values, but that's not a hard
* and fast rule. It's basically a knob to tune between "less overhead with
* less parallelism" and "more overhead, but more parallelism".
*
* '8' was chosen as a reasonable, balanced, default based off of sequential
* read and write tests to a zvol in an NVMe pool (with 16 CPUs).
*/
static unsigned int zvol_blk_mq_blocks_per_thread = 8;
#endif
#ifndef BLKDEV_DEFAULT_RQ
/* BLKDEV_MAX_RQ was renamed to BLKDEV_DEFAULT_RQ in the 5.16 kernel */
#define BLKDEV_DEFAULT_RQ BLKDEV_MAX_RQ
#endif
/*
* Finalize our BIO or request.
*/
#ifdef HAVE_BLK_MQ
#define END_IO(zv, bio, rq, error) do { \
if (bio) { \
BIO_END_IO(bio, error); \
} else { \
blk_mq_end_request(rq, errno_to_bi_status(error)); \
} \
} while (0)
#else
#define END_IO(zv, bio, rq, error) BIO_END_IO(bio, error)
#endif
#ifdef HAVE_BLK_MQ
static unsigned int zvol_blk_mq_queue_depth = BLKDEV_DEFAULT_RQ;
static unsigned int zvol_actual_blk_mq_queue_depth;
#endif
struct zvol_state_os { struct zvol_state_os {
struct gendisk *zvo_disk; /* generic disk */ struct gendisk *zvo_disk; /* generic disk */
struct request_queue *zvo_queue; /* request queue */ struct request_queue *zvo_queue; /* request queue */
dev_t zvo_dev; /* device id */ dev_t zvo_dev; /* device id */
#ifdef HAVE_BLK_MQ
struct blk_mq_tag_set tag_set;
#endif
/* Set from the global 'zvol_use_blk_mq' at zvol load */
boolean_t use_blk_mq;
}; };
taskq_t *zvol_taskq; taskq_t *zvol_taskq;
@ -63,8 +120,14 @@ static struct ida zvol_ida;
typedef struct zv_request_stack { typedef struct zv_request_stack {
zvol_state_t *zv; zvol_state_t *zv;
struct bio *bio; struct bio *bio;
struct request *rq;
} zv_request_t; } zv_request_t;
typedef struct zv_work {
struct request *rq;
struct work_struct work;
} zv_work_t;
typedef struct zv_request_task { typedef struct zv_request_task {
zv_request_t zvr; zv_request_t zvr;
taskq_ent_t ent; taskq_ent_t ent;
@ -86,6 +149,62 @@ zv_request_task_free(zv_request_task_t *task)
kmem_free(task, sizeof (*task)); kmem_free(task, sizeof (*task));
} }
#ifdef HAVE_BLK_MQ
/*
* This is called when a new block multiqueue request comes in. A request
* contains one or more BIOs.
*/
static blk_status_t zvol_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
struct request *rq = bd->rq;
zvol_state_t *zv = rq->q->queuedata;
/* Tell the kernel that we are starting to process this request */
blk_mq_start_request(rq);
if (blk_rq_is_passthrough(rq)) {
/* Skip non filesystem request */
blk_mq_end_request(rq, BLK_STS_IOERR);
return (BLK_STS_IOERR);
}
zvol_request_impl(zv, NULL, rq, 0);
/* Acknowledge to the kernel that we got this request */
return (BLK_STS_OK);
}
static struct blk_mq_ops zvol_blk_mq_queue_ops = {
.queue_rq = zvol_mq_queue_rq,
};
/* Initialize our blk-mq struct */
static int zvol_blk_mq_alloc_tag_set(zvol_state_t *zv)
{
struct zvol_state_os *zso = zv->zv_zso;
memset(&zso->tag_set, 0, sizeof (zso->tag_set));
/* Initialize tag set. */
zso->tag_set.ops = &zvol_blk_mq_queue_ops;
zso->tag_set.nr_hw_queues = zvol_blk_mq_actual_threads;
zso->tag_set.queue_depth = zvol_actual_blk_mq_queue_depth;
zso->tag_set.numa_node = NUMA_NO_NODE;
zso->tag_set.cmd_size = 0;
/*
* We need BLK_MQ_F_BLOCKING here since we do blocking calls in
* zvol_request_impl()
*/
zso->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_BLOCKING;
zso->tag_set.driver_data = zv;
return (blk_mq_alloc_tag_set(&zso->tag_set));
}
#endif /* HAVE_BLK_MQ */
/* /*
* Given a path, return TRUE if path is a ZVOL. * Given a path, return TRUE if path is a ZVOL.
*/ */
@ -107,38 +226,51 @@ static void
zvol_write(zv_request_t *zvr) zvol_write(zv_request_t *zvr)
{ {
struct bio *bio = zvr->bio; struct bio *bio = zvr->bio;
struct request *rq = zvr->rq;
int error = 0; int error = 0;
zfs_uio_t uio; zfs_uio_t uio;
zfs_uio_bvec_init(&uio, bio);
zvol_state_t *zv = zvr->zv; zvol_state_t *zv = zvr->zv;
struct request_queue *q;
struct gendisk *disk;
unsigned long start_time = 0;
boolean_t acct = B_FALSE;
ASSERT3P(zv, !=, NULL); ASSERT3P(zv, !=, NULL);
ASSERT3U(zv->zv_open_count, >, 0); ASSERT3U(zv->zv_open_count, >, 0);
ASSERT3P(zv->zv_zilog, !=, NULL); ASSERT3P(zv->zv_zilog, !=, NULL);
q = zv->zv_zso->zvo_queue;
disk = zv->zv_zso->zvo_disk;
/* bio marked as FLUSH need to flush before write */ /* bio marked as FLUSH need to flush before write */
if (bio_is_flush(bio)) if (io_is_flush(bio, rq))
zil_commit(zv->zv_zilog, ZVOL_OBJ); zil_commit(zv->zv_zilog, ZVOL_OBJ);
/* Some requests are just for flush and nothing else. */ /* Some requests are just for flush and nothing else. */
if (uio.uio_resid == 0) { if (io_size(bio, rq) == 0) {
rw_exit(&zv->zv_suspend_lock); rw_exit(&zv->zv_suspend_lock);
BIO_END_IO(bio, 0); END_IO(zv, bio, rq, 0);
return; return;
} }
struct request_queue *q = zv->zv_zso->zvo_queue; zfs_uio_bvec_init(&uio, bio, rq);
struct gendisk *disk = zv->zv_zso->zvo_disk;
ssize_t start_resid = uio.uio_resid;
unsigned long start_time;
boolean_t acct = blk_queue_io_stat(q); ssize_t start_resid = uio.uio_resid;
if (acct)
start_time = blk_generic_start_io_acct(q, disk, WRITE, bio); /*
* With use_blk_mq, accounting is done by blk_mq_start_request()
* and blk_mq_end_request(), so we can skip it here.
*/
if (bio) {
acct = blk_queue_io_stat(q);
if (acct) {
start_time = blk_generic_start_io_acct(q, disk, WRITE,
bio);
}
}
boolean_t sync = boolean_t sync =
bio_is_fua(bio) || zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS; io_is_fua(bio, rq) || zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS;
zfs_locked_range_t *lr = zfs_rangelock_enter(&zv->zv_rangelock, zfs_locked_range_t *lr = zfs_rangelock_enter(&zv->zv_rangelock,
uio.uio_loffset, uio.uio_resid, RL_WRITER); uio.uio_loffset, uio.uio_resid, RL_WRITER);
@ -180,10 +312,11 @@ zvol_write(zv_request_t *zvr)
rw_exit(&zv->zv_suspend_lock); rw_exit(&zv->zv_suspend_lock);
if (acct) if (bio && acct) {
blk_generic_end_io_acct(q, disk, WRITE, bio, start_time); blk_generic_end_io_acct(q, disk, WRITE, bio, start_time);
}
BIO_END_IO(bio, -error); END_IO(zv, bio, rq, -error);
} }
static void static void
@ -198,27 +331,33 @@ static void
zvol_discard(zv_request_t *zvr) zvol_discard(zv_request_t *zvr)
{ {
struct bio *bio = zvr->bio; struct bio *bio = zvr->bio;
struct request *rq = zvr->rq;
zvol_state_t *zv = zvr->zv; zvol_state_t *zv = zvr->zv;
uint64_t start = BIO_BI_SECTOR(bio) << 9; uint64_t start = io_offset(bio, rq);
uint64_t size = BIO_BI_SIZE(bio); uint64_t size = io_size(bio, rq);
uint64_t end = start + size; uint64_t end = start + size;
boolean_t sync; boolean_t sync;
int error = 0; int error = 0;
dmu_tx_t *tx; dmu_tx_t *tx;
struct request_queue *q = zv->zv_zso->zvo_queue;
struct gendisk *disk = zv->zv_zso->zvo_disk;
unsigned long start_time = 0;
boolean_t acct = blk_queue_io_stat(q);
ASSERT3P(zv, !=, NULL); ASSERT3P(zv, !=, NULL);
ASSERT3U(zv->zv_open_count, >, 0); ASSERT3U(zv->zv_open_count, >, 0);
ASSERT3P(zv->zv_zilog, !=, NULL); ASSERT3P(zv->zv_zilog, !=, NULL);
struct request_queue *q = zv->zv_zso->zvo_queue; if (bio) {
struct gendisk *disk = zv->zv_zso->zvo_disk; acct = blk_queue_io_stat(q);
unsigned long start_time; if (acct) {
start_time = blk_generic_start_io_acct(q, disk, WRITE,
bio);
}
}
boolean_t acct = blk_queue_io_stat(q); sync = io_is_fua(bio, rq) || zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS;
if (acct)
start_time = blk_generic_start_io_acct(q, disk, WRITE, bio);
sync = bio_is_fua(bio) || zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS;
if (end > zv->zv_volsize) { if (end > zv->zv_volsize) {
error = SET_ERROR(EIO); error = SET_ERROR(EIO);
@ -231,7 +370,7 @@ zvol_discard(zv_request_t *zvr)
* the unaligned parts which is slow (read-modify-write) and useless * the unaligned parts which is slow (read-modify-write) and useless
* since we are not freeing any space by doing so. * since we are not freeing any space by doing so.
*/ */
if (!bio_is_secure_erase(bio)) { if (!io_is_secure_erase(bio, rq)) {
start = P2ROUNDUP(start, zv->zv_volblocksize); start = P2ROUNDUP(start, zv->zv_volblocksize);
end = P2ALIGN(end, zv->zv_volblocksize); end = P2ALIGN(end, zv->zv_volblocksize);
size = end - start; size = end - start;
@ -262,10 +401,12 @@ zvol_discard(zv_request_t *zvr)
unlock: unlock:
rw_exit(&zv->zv_suspend_lock); rw_exit(&zv->zv_suspend_lock);
if (acct) if (bio && acct) {
blk_generic_end_io_acct(q, disk, WRITE, bio, start_time); blk_generic_end_io_acct(q, disk, WRITE, bio,
start_time);
}
BIO_END_IO(bio, -error); END_IO(zv, bio, rq, -error);
} }
static void static void
@ -280,28 +421,41 @@ static void
zvol_read(zv_request_t *zvr) zvol_read(zv_request_t *zvr)
{ {
struct bio *bio = zvr->bio; struct bio *bio = zvr->bio;
struct request *rq = zvr->rq;
int error = 0; int error = 0;
zfs_uio_t uio; zfs_uio_t uio;
boolean_t acct = B_FALSE;
zfs_uio_bvec_init(&uio, bio);
zvol_state_t *zv = zvr->zv; zvol_state_t *zv = zvr->zv;
struct request_queue *q;
struct gendisk *disk;
unsigned long start_time = 0;
ASSERT3P(zv, !=, NULL); ASSERT3P(zv, !=, NULL);
ASSERT3U(zv->zv_open_count, >, 0); ASSERT3U(zv->zv_open_count, >, 0);
struct request_queue *q = zv->zv_zso->zvo_queue; zfs_uio_bvec_init(&uio, bio, rq);
struct gendisk *disk = zv->zv_zso->zvo_disk;
ssize_t start_resid = uio.uio_resid;
unsigned long start_time;
boolean_t acct = blk_queue_io_stat(q); q = zv->zv_zso->zvo_queue;
disk = zv->zv_zso->zvo_disk;
ssize_t start_resid = uio.uio_resid;
/*
* When blk-mq is being used, accounting is done by
* blk_mq_start_request() and blk_mq_end_request().
*/
if (bio) {
acct = blk_queue_io_stat(q);
if (acct) if (acct)
start_time = blk_generic_start_io_acct(q, disk, READ, bio); start_time = blk_generic_start_io_acct(q, disk, READ,
bio);
}
zfs_locked_range_t *lr = zfs_rangelock_enter(&zv->zv_rangelock, zfs_locked_range_t *lr = zfs_rangelock_enter(&zv->zv_rangelock,
uio.uio_loffset, uio.uio_resid, RL_READER); uio.uio_loffset, uio.uio_resid, RL_READER);
uint64_t volsize = zv->zv_volsize; uint64_t volsize = zv->zv_volsize;
while (uio.uio_resid > 0 && uio.uio_loffset < volsize) { while (uio.uio_resid > 0 && uio.uio_loffset < volsize) {
uint64_t bytes = MIN(uio.uio_resid, DMU_MAX_ACCESS >> 1); uint64_t bytes = MIN(uio.uio_resid, DMU_MAX_ACCESS >> 1);
@ -325,10 +479,11 @@ zvol_read(zv_request_t *zvr)
rw_exit(&zv->zv_suspend_lock); rw_exit(&zv->zv_suspend_lock);
if (acct) if (bio && acct) {
blk_generic_end_io_acct(q, disk, READ, bio, start_time); blk_generic_end_io_acct(q, disk, READ, bio, start_time);
}
BIO_END_IO(bio, -error); END_IO(zv, bio, rq, -error);
} }
static void static void
@ -339,52 +494,49 @@ zvol_read_task(void *arg)
zv_request_task_free(task); zv_request_task_free(task);
} }
#ifdef HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS
#ifdef HAVE_BDEV_SUBMIT_BIO_RETURNS_VOID /*
* Process a BIO or request
*
* Either 'bio' or 'rq' should be set depending on if we are processing a
* bio or a request (both should not be set).
*
* force_sync: Set to 0 to defer processing to a background taskq
* Set to 1 to process data synchronously
*/
static void static void
zvol_submit_bio(struct bio *bio) zvol_request_impl(zvol_state_t *zv, struct bio *bio, struct request *rq,
#else boolean_t force_sync)
static blk_qc_t
zvol_submit_bio(struct bio *bio)
#endif
#else
static MAKE_REQUEST_FN_RET
zvol_request(struct request_queue *q, struct bio *bio)
#endif
{ {
#ifdef HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS
#if defined(HAVE_BIO_BDEV_DISK)
struct request_queue *q = bio->bi_bdev->bd_disk->queue;
#else
struct request_queue *q = bio->bi_disk->queue;
#endif
#endif
zvol_state_t *zv = q->queuedata;
fstrans_cookie_t cookie = spl_fstrans_mark(); fstrans_cookie_t cookie = spl_fstrans_mark();
uint64_t offset = BIO_BI_SECTOR(bio) << 9; uint64_t offset = io_offset(bio, rq);
uint64_t size = BIO_BI_SIZE(bio); uint64_t size = io_size(bio, rq);
int rw = bio_data_dir(bio); int rw = io_data_dir(bio, rq);
if (bio_has_data(bio) && offset + size > zv->zv_volsize) { if (zvol_request_sync)
printk(KERN_INFO force_sync = 1;
"%s: bad access: offset=%llu, size=%lu\n",
zv->zv_zso->zvo_disk->disk_name,
(long long unsigned)offset,
(long unsigned)size);
BIO_END_IO(bio, -SET_ERROR(EIO));
goto out;
}
zv_request_t zvr = { zv_request_t zvr = {
.zv = zv, .zv = zv,
.bio = bio, .bio = bio,
.rq = rq,
}; };
if (io_has_data(bio, rq) && offset + size > zv->zv_volsize) {
printk(KERN_INFO "%s: bad access: offset=%llu, size=%lu\n",
zv->zv_zso->zvo_disk->disk_name,
(long long unsigned)offset,
(long unsigned)size);
END_IO(zv, bio, rq, -SET_ERROR(EIO));
goto out;
}
zv_request_task_t *task; zv_request_task_t *task;
if (rw == WRITE) { if (rw == WRITE) {
if (unlikely(zv->zv_flags & ZVOL_RDONLY)) { if (unlikely(zv->zv_flags & ZVOL_RDONLY)) {
BIO_END_IO(bio, -SET_ERROR(EROFS)); END_IO(zv, bio, rq, -SET_ERROR(EROFS));
goto out; goto out;
} }
@ -421,7 +573,7 @@ zvol_request(struct request_queue *q, struct bio *bio)
* i/o may be a ZIL write (via zil_commit()), or a read of an * i/o may be a ZIL write (via zil_commit()), or a read of an
* indirect block, or a read of a data block (if this is a * indirect block, or a read of a data block (if this is a
* partial-block write). We will indicate that the i/o is * partial-block write). We will indicate that the i/o is
* complete by calling BIO_END_IO() from the taskq callback. * complete by calling END_IO() from the taskq callback.
* *
* This design allows the calling thread to continue and * This design allows the calling thread to continue and
* initiate more concurrent operations by calling * initiate more concurrent operations by calling
@ -441,12 +593,12 @@ zvol_request(struct request_queue *q, struct bio *bio)
* of one i/o at a time per zvol. However, an even better * of one i/o at a time per zvol. However, an even better
* design would be for zvol_request() to initiate the zio * design would be for zvol_request() to initiate the zio
* directly, and then be notified by the zio_done callback, * directly, and then be notified by the zio_done callback,
* which would call BIO_END_IO(). Unfortunately, the DMU/ZIL * which would call END_IO(). Unfortunately, the DMU/ZIL
* interfaces lack this functionality (they block waiting for * interfaces lack this functionality (they block waiting for
* the i/o to complete). * the i/o to complete).
*/ */
if (bio_is_discard(bio) || bio_is_secure_erase(bio)) { if (io_is_discard(bio, rq) || io_is_secure_erase(bio, rq)) {
if (zvol_request_sync) { if (force_sync) {
zvol_discard(&zvr); zvol_discard(&zvr);
} else { } else {
task = zv_request_task_create(zvr); task = zv_request_task_create(zvr);
@ -454,7 +606,7 @@ zvol_request(struct request_queue *q, struct bio *bio)
zvol_discard_task, task, 0, &task->ent); zvol_discard_task, task, 0, &task->ent);
} }
} else { } else {
if (zvol_request_sync) { if (force_sync) {
zvol_write(&zvr); zvol_write(&zvr);
} else { } else {
task = zv_request_task_create(zvr); task = zv_request_task_create(zvr);
@ -469,14 +621,14 @@ zvol_request(struct request_queue *q, struct bio *bio)
* data and require no additional handling. * data and require no additional handling.
*/ */
if (size == 0) { if (size == 0) {
BIO_END_IO(bio, 0); END_IO(zv, bio, rq, 0);
goto out; goto out;
} }
rw_enter(&zv->zv_suspend_lock, RW_READER); rw_enter(&zv->zv_suspend_lock, RW_READER);
/* See comment in WRITE case above. */ /* See comment in WRITE case above. */
if (zvol_request_sync) { if (force_sync) {
zvol_read(&zvr); zvol_read(&zvr);
} else { } else {
task = zv_request_task_create(zvr); task = zv_request_task_create(zvr);
@ -487,8 +639,33 @@ zvol_request(struct request_queue *q, struct bio *bio)
out: out:
spl_fstrans_unmark(cookie); spl_fstrans_unmark(cookie);
#if (defined(HAVE_MAKE_REQUEST_FN_RET_QC) || \ }
defined(HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS)) && \
#ifdef HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS
#ifdef HAVE_BDEV_SUBMIT_BIO_RETURNS_VOID
static void
zvol_submit_bio(struct bio *bio)
#else
static blk_qc_t
zvol_submit_bio(struct bio *bio)
#endif
#else
static MAKE_REQUEST_FN_RET
zvol_request(struct request_queue *q, struct bio *bio)
#endif
{
#ifdef HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS
#if defined(HAVE_BIO_BDEV_DISK)
struct request_queue *q = bio->bi_bdev->bd_disk->queue;
#else
struct request_queue *q = bio->bi_disk->queue;
#endif
#endif
zvol_state_t *zv = q->queuedata;
zvol_request_impl(zv, bio, NULL, 0);
#if defined(HAVE_MAKE_REQUEST_FN_RET_QC) || \
defined(HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS) && \
!defined(HAVE_BDEV_SUBMIT_BIO_RETURNS_VOID) !defined(HAVE_BDEV_SUBMIT_BIO_RETURNS_VOID)
return (BLK_QC_T_NONE); return (BLK_QC_T_NONE);
#endif #endif
@ -805,6 +982,27 @@ zvol_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return (0); return (0);
} }
/*
* Why have two separate block_device_operations structs?
*
* Normally we'd just have one, and assign 'submit_bio' as needed. However,
* it's possible the user's kernel is built with CONSTIFY_PLUGIN, meaning we
* can't just change submit_bio dynamically at runtime. So just create two
* separate structs to get around this.
*/
static const struct block_device_operations zvol_ops_blk_mq = {
.open = zvol_open,
.release = zvol_release,
.ioctl = zvol_ioctl,
.compat_ioctl = zvol_compat_ioctl,
.check_events = zvol_check_events,
#ifdef HAVE_BLOCK_DEVICE_OPERATIONS_REVALIDATE_DISK
.revalidate_disk = zvol_revalidate_disk,
#endif
.getgeo = zvol_getgeo,
.owner = THIS_MODULE,
};
static const struct block_device_operations zvol_ops = { static const struct block_device_operations zvol_ops = {
.open = zvol_open, .open = zvol_open,
.release = zvol_release, .release = zvol_release,
@ -821,6 +1019,87 @@ static const struct block_device_operations zvol_ops = {
#endif #endif
}; };
static int
zvol_alloc_non_blk_mq(struct zvol_state_os *zso)
{
#if defined(HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS)
#if defined(HAVE_BLK_ALLOC_DISK)
zso->zvo_disk = blk_alloc_disk(NUMA_NO_NODE);
if (zso->zvo_disk == NULL)
return (1);
zso->zvo_disk->minors = ZVOL_MINORS;
zso->zvo_queue = zso->zvo_disk->queue;
#else
zso->zvo_queue = blk_alloc_queue(NUMA_NO_NODE);
if (zso->zvo_queue == NULL)
return (1);
zso->zvo_disk = alloc_disk(ZVOL_MINORS);
if (zso->zvo_disk == NULL) {
blk_cleanup_queue(zso->zvo_queue);
return (1);
}
zso->zvo_disk->queue = zso->zvo_queue;
#endif /* HAVE_BLK_ALLOC_DISK */
#else
zso->zvo_queue = blk_generic_alloc_queue(zvol_request, NUMA_NO_NODE);
if (zso->zvo_queue == NULL)
return (1);
zso->zvo_disk = alloc_disk(ZVOL_MINORS);
if (zso->zvo_disk == NULL) {
blk_cleanup_queue(zso->zvo_queue);
return (1);
}
zso->zvo_disk->queue = zso->zvo_queue;
#endif /* HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS */
return (0);
}
static int
zvol_alloc_blk_mq(zvol_state_t *zv)
{
#ifdef HAVE_BLK_MQ
struct zvol_state_os *zso = zv->zv_zso;
/* Allocate our blk-mq tag_set */
if (zvol_blk_mq_alloc_tag_set(zv) != 0)
return (1);
#if defined(HAVE_BLK_ALLOC_DISK)
zso->zvo_disk = blk_mq_alloc_disk(&zso->tag_set, zv);
if (zso->zvo_disk == NULL) {
blk_mq_free_tag_set(&zso->tag_set);
return (1);
}
zso->zvo_queue = zso->zvo_disk->queue;
zso->zvo_disk->minors = ZVOL_MINORS;
#else
zso->zvo_disk = alloc_disk(ZVOL_MINORS);
if (zso->zvo_disk == NULL) {
blk_cleanup_queue(zso->zvo_queue);
blk_mq_free_tag_set(&zso->tag_set);
return (1);
}
/* Allocate queue */
zso->zvo_queue = blk_mq_init_queue(&zso->tag_set);
if (IS_ERR(zso->zvo_queue)) {
blk_mq_free_tag_set(&zso->tag_set);
return (1);
}
/* Our queue is now created, assign it to our disk */
zso->zvo_disk->queue = zso->zvo_queue;
#endif
#endif
return (0);
}
/* /*
* Allocate memory for a new zvol_state_t and setup the required * Allocate memory for a new zvol_state_t and setup the required
* request queue and generic disk structures for the block device. * request queue and generic disk structures for the block device.
@ -831,6 +1110,7 @@ zvol_alloc(dev_t dev, const char *name)
zvol_state_t *zv; zvol_state_t *zv;
struct zvol_state_os *zso; struct zvol_state_os *zso;
uint64_t volmode; uint64_t volmode;
int ret;
if (dsl_prop_get_integer(name, "volmode", &volmode, NULL) != 0) if (dsl_prop_get_integer(name, "volmode", &volmode, NULL) != 0)
return (NULL); return (NULL);
@ -849,48 +1129,44 @@ zvol_alloc(dev_t dev, const char *name)
list_link_init(&zv->zv_next); list_link_init(&zv->zv_next);
mutex_init(&zv->zv_state_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&zv->zv_state_lock, NULL, MUTEX_DEFAULT, NULL);
#ifdef HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS #ifdef HAVE_BLK_MQ
#ifdef HAVE_BLK_ALLOC_DISK zv->zv_zso->use_blk_mq = zvol_use_blk_mq;
zso->zvo_disk = blk_alloc_disk(NUMA_NO_NODE); #endif
if (zso->zvo_disk == NULL)
goto out_kmem;
zso->zvo_disk->minors = ZVOL_MINORS; /*
zso->zvo_queue = zso->zvo_disk->queue; * The block layer has 3 interfaces for getting BIOs:
#else *
zso->zvo_queue = blk_alloc_queue(NUMA_NO_NODE); * 1. blk-mq request queues (new)
if (zso->zvo_queue == NULL) * 2. submit_bio() (oldest)
goto out_kmem; * 3. regular request queues (old).
*
zso->zvo_disk = alloc_disk(ZVOL_MINORS); * Each of those interfaces has two permutations:
if (zso->zvo_disk == NULL) { *
blk_cleanup_queue(zso->zvo_queue); * a) We have blk_alloc_disk()/blk_mq_alloc_disk(), which allocates
goto out_kmem; * both the disk and its queue (5.14 kernel or newer)
*
* b) We don't have blk_*alloc_disk(), and have to allocate the
* disk and the queue separately. (5.13 kernel or older)
*/
if (zv->zv_zso->use_blk_mq) {
ret = zvol_alloc_blk_mq(zv);
zso->zvo_disk->fops = &zvol_ops_blk_mq;
} else {
ret = zvol_alloc_non_blk_mq(zso);
zso->zvo_disk->fops = &zvol_ops;
} }
if (ret != 0)
zso->zvo_disk->queue = zso->zvo_queue;
#endif /* HAVE_BLK_ALLOC_DISK */
#else
zso->zvo_queue = blk_generic_alloc_queue(zvol_request, NUMA_NO_NODE);
if (zso->zvo_queue == NULL)
goto out_kmem; goto out_kmem;
zso->zvo_disk = alloc_disk(ZVOL_MINORS);
if (zso->zvo_disk == NULL) {
blk_cleanup_queue(zso->zvo_queue);
goto out_kmem;
}
zso->zvo_disk->queue = zso->zvo_queue;
#endif /* HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS */
blk_queue_set_write_cache(zso->zvo_queue, B_TRUE, B_TRUE); blk_queue_set_write_cache(zso->zvo_queue, B_TRUE, B_TRUE);
/* Limit read-ahead to a single page to prevent over-prefetching. */ /* Limit read-ahead to a single page to prevent over-prefetching. */
blk_queue_set_read_ahead(zso->zvo_queue, 1); blk_queue_set_read_ahead(zso->zvo_queue, 1);
if (!zv->zv_zso->use_blk_mq) {
/* Disable write merging in favor of the ZIO pipeline. */ /* Disable write merging in favor of the ZIO pipeline. */
blk_queue_flag_set(QUEUE_FLAG_NOMERGES, zso->zvo_queue); blk_queue_flag_set(QUEUE_FLAG_NOMERGES, zso->zvo_queue);
}
/* Enable /proc/diskstats */ /* Enable /proc/diskstats */
blk_queue_flag_set(QUEUE_FLAG_IO_STAT, zso->zvo_queue); blk_queue_flag_set(QUEUE_FLAG_IO_STAT, zso->zvo_queue);
@ -918,7 +1194,6 @@ zvol_alloc(dev_t dev, const char *name)
} }
zso->zvo_disk->first_minor = (dev & MINORMASK); zso->zvo_disk->first_minor = (dev & MINORMASK);
zso->zvo_disk->fops = &zvol_ops;
zso->zvo_disk->private_data = zv; zso->zvo_disk->private_data = zv;
snprintf(zso->zvo_disk->disk_name, DISK_NAME_LEN, "%s%d", snprintf(zso->zvo_disk->disk_name, DISK_NAME_LEN, "%s%d",
ZVOL_DEV_NAME, (dev & MINORMASK)); ZVOL_DEV_NAME, (dev & MINORMASK));
@ -963,6 +1238,11 @@ zvol_os_free(zvol_state_t *zv)
put_disk(zv->zv_zso->zvo_disk); put_disk(zv->zv_zso->zvo_disk);
#endif #endif
#ifdef HAVE_BLK_MQ
if (zv->zv_zso->use_blk_mq)
blk_mq_free_tag_set(&zv->zv_zso->tag_set);
#endif
ida_simple_remove(&zvol_ida, ida_simple_remove(&zvol_ida,
MINOR(zv->zv_zso->zvo_dev) >> ZVOL_MINOR_BITS); MINOR(zv->zv_zso->zvo_dev) >> ZVOL_MINOR_BITS);
@ -1044,8 +1324,69 @@ zvol_os_create_minor(const char *name)
blk_queue_max_hw_sectors(zv->zv_zso->zvo_queue, blk_queue_max_hw_sectors(zv->zv_zso->zvo_queue,
(DMU_MAX_ACCESS / 4) >> 9); (DMU_MAX_ACCESS / 4) >> 9);
if (zv->zv_zso->use_blk_mq) {
/*
* IO requests can be really big (1MB). When an IO request
* comes in, it is passed off to zvol_read() or zvol_write()
* in a new thread, where it is chunked up into 'volblocksize'
* sized pieces and processed. So for example, if the request
* is a 1MB write and your volblocksize is 128k, one zvol_write
* thread will take that request and sequentially do ten 128k
* IOs. This is due to the fact that the thread needs to lock
* each volblocksize sized block. So you might be wondering:
* "instead of passing the whole 1MB request to one thread,
* why not pass ten individual 128k chunks to ten threads and
* process the whole write in parallel?" The short answer is
* that there's a sweet spot number of chunks that balances
* the greater parallelism with the added overhead of more
* threads. The sweet spot can be different depending on if you
* have a read or write heavy workload. Writes typically want
* high chunk counts while reads typically want lower ones. On
* a test pool with 6 NVMe drives in a 3x 2-disk mirror
* configuration, with volblocksize=8k, the sweet spot for good
* sequential reads and writes was at 8 chunks.
*/
/*
* Below we tell the kernel how big we want our requests
* to be. You would think that blk_queue_io_opt() would be
* used to do this since it is used to "set optimal request
* size for the queue", but that doesn't seem to do
* anything - the kernel still gives you huge requests
* with tons of little PAGE_SIZE segments contained within it.
*
* Knowing that the kernel will just give you PAGE_SIZE segments
* no matter what, you can say "ok, I want PAGE_SIZE byte
* segments, and I want 'N' of them per request", where N is
* the correct number of segments for the volblocksize and
* number of chunks you want.
*/
#ifdef HAVE_BLK_MQ
if (zvol_blk_mq_blocks_per_thread != 0) {
unsigned int chunks;
chunks = MIN(zvol_blk_mq_blocks_per_thread, UINT16_MAX);
blk_queue_max_segment_size(zv->zv_zso->zvo_queue,
PAGE_SIZE);
blk_queue_max_segments(zv->zv_zso->zvo_queue,
(zv->zv_volblocksize * chunks) / PAGE_SIZE);
} else {
/*
* Special case: zvol_blk_mq_blocks_per_thread = 0
* Max everything out.
*/
blk_queue_max_segments(zv->zv_zso->zvo_queue,
UINT16_MAX);
blk_queue_max_segment_size(zv->zv_zso->zvo_queue,
UINT_MAX);
}
#endif
} else {
blk_queue_max_segments(zv->zv_zso->zvo_queue, UINT16_MAX); blk_queue_max_segments(zv->zv_zso->zvo_queue, UINT16_MAX);
blk_queue_max_segment_size(zv->zv_zso->zvo_queue, UINT_MAX); blk_queue_max_segment_size(zv->zv_zso->zvo_queue, UINT_MAX);
}
blk_queue_physical_block_size(zv->zv_zso->zvo_queue, blk_queue_physical_block_size(zv->zv_zso->zvo_queue,
zv->zv_volblocksize); zv->zv_volblocksize);
blk_queue_io_opt(zv->zv_zso->zvo_queue, zv->zv_volblocksize); blk_queue_io_opt(zv->zv_zso->zvo_queue, zv->zv_volblocksize);
@ -1167,19 +1508,54 @@ int
zvol_init(void) zvol_init(void)
{ {
int error; int error;
int threads = MIN(MAX(zvol_threads, 1), 1024);
/*
* zvol_threads is the module param the user passes in.
*
* zvol_actual_threads is what we use internally, since the user can
* pass zvol_thread = 0 to mean "use all the CPUs" (the default).
*/
static unsigned int zvol_actual_threads;
if (zvol_threads == 0) {
/*
* See dde9380a1 for why 32 was chosen here. This should
* probably be refined to be some multiple of the number
* of CPUs.
*/
zvol_actual_threads = MAX(num_online_cpus(), 32);
} else {
zvol_actual_threads = MIN(MAX(zvol_threads, 1), 1024);
}
error = register_blkdev(zvol_major, ZVOL_DRIVER); error = register_blkdev(zvol_major, ZVOL_DRIVER);
if (error) { if (error) {
printk(KERN_INFO "ZFS: register_blkdev() failed %d\n", error); printk(KERN_INFO "ZFS: register_blkdev() failed %d\n", error);
return (error); return (error);
} }
zvol_taskq = taskq_create(ZVOL_DRIVER, threads, maxclsyspri,
threads * 2, INT_MAX, TASKQ_PREPOPULATE | TASKQ_DYNAMIC); #ifdef HAVE_BLK_MQ
if (zvol_blk_mq_queue_depth == 0) {
zvol_actual_blk_mq_queue_depth = BLKDEV_DEFAULT_RQ;
} else {
zvol_actual_blk_mq_queue_depth =
MAX(zvol_blk_mq_queue_depth, BLKDEV_MIN_RQ);
}
if (zvol_blk_mq_threads == 0) {
zvol_blk_mq_actual_threads = num_online_cpus();
} else {
zvol_blk_mq_actual_threads = MIN(MAX(zvol_blk_mq_threads, 1),
1024);
}
#endif
zvol_taskq = taskq_create(ZVOL_DRIVER, zvol_actual_threads, maxclsyspri,
zvol_actual_threads, INT_MAX, TASKQ_PREPOPULATE | TASKQ_DYNAMIC);
if (zvol_taskq == NULL) { if (zvol_taskq == NULL) {
unregister_blkdev(zvol_major, ZVOL_DRIVER); unregister_blkdev(zvol_major, ZVOL_DRIVER);
return (-ENOMEM); return (-ENOMEM);
} }
zvol_init_impl(); zvol_init_impl();
ida_init(&zvol_ida); ida_init(&zvol_ida);
return (0); return (0);
@ -1202,7 +1578,8 @@ module_param(zvol_major, uint, 0444);
MODULE_PARM_DESC(zvol_major, "Major number for zvol device"); MODULE_PARM_DESC(zvol_major, "Major number for zvol device");
module_param(zvol_threads, uint, 0444); module_param(zvol_threads, uint, 0444);
MODULE_PARM_DESC(zvol_threads, "Max number of threads to handle I/O requests"); MODULE_PARM_DESC(zvol_threads, "Number of threads to handle I/O requests. Set"
"to 0 to use all active CPUs");
module_param(zvol_request_sync, uint, 0644); module_param(zvol_request_sync, uint, 0644);
MODULE_PARM_DESC(zvol_request_sync, "Synchronously handle bio requests"); MODULE_PARM_DESC(zvol_request_sync, "Synchronously handle bio requests");
@ -1215,4 +1592,17 @@ MODULE_PARM_DESC(zvol_prefetch_bytes, "Prefetch N bytes at zvol start+end");
module_param(zvol_volmode, uint, 0644); module_param(zvol_volmode, uint, 0644);
MODULE_PARM_DESC(zvol_volmode, "Default volmode property value"); MODULE_PARM_DESC(zvol_volmode, "Default volmode property value");
#ifdef HAVE_BLK_MQ
module_param(zvol_blk_mq_queue_depth, uint, 0644);
MODULE_PARM_DESC(zvol_blk_mq_queue_depth, "Default blk-mq queue depth");
module_param(zvol_use_blk_mq, uint, 0644);
MODULE_PARM_DESC(zvol_use_blk_mq, "Use the blk-mq API for zvols");
module_param(zvol_blk_mq_blocks_per_thread, uint, 0644);
MODULE_PARM_DESC(zvol_blk_mq_blocks_per_thread,
"Process volblocksize blocks per thread");
#endif
/* END CSTYLED */ /* END CSTYLED */

6
tests/runfiles/common.run
View File

@ -937,9 +937,13 @@ tags = ['functional', 'zvol', 'zvol_cli']
[tests/functional/zvol/zvol_misc] [tests/functional/zvol/zvol_misc]
tests = ['zvol_misc_002_pos', 'zvol_misc_hierarchy', 'zvol_misc_rename_inuse', tests = ['zvol_misc_002_pos', 'zvol_misc_hierarchy', 'zvol_misc_rename_inuse',
'zvol_misc_snapdev', 'zvol_misc_volmode', 'zvol_misc_zil'] 'zvol_misc_snapdev', 'zvol_misc_trim', 'zvol_misc_volmode', 'zvol_misc_zil']
tags = ['functional', 'zvol', 'zvol_misc'] tags = ['functional', 'zvol', 'zvol_misc']
[tests/functional/zvol/zvol_stress]
tests = ['zvol_stress']
tags = ['functional', 'zvol', 'zvol_stress']
[tests/functional/zvol/zvol_swap] [tests/functional/zvol/zvol_swap]
tests = ['zvol_swap_001_pos', 'zvol_swap_002_pos', 'zvol_swap_004_pos'] tests = ['zvol_swap_001_pos', 'zvol_swap_002_pos', 'zvol_swap_004_pos']
tags = ['functional', 'zvol', 'zvol_swap'] tags = ['functional', 'zvol', 'zvol_swap']

5
tests/runfiles/linux.run
View File

@ -184,3 +184,8 @@ tags = ['functional', 'user_namespace']
tests = ['groupspace_001_pos', 'groupspace_002_pos', 'groupspace_003_pos', tests = ['groupspace_001_pos', 'groupspace_002_pos', 'groupspace_003_pos',
'userquota_013_pos', 'userspace_003_pos'] 'userquota_013_pos', 'userspace_003_pos']
tags = ['functional', 'userquota'] tags = ['functional', 'userquota']
[tests/functional/zvol/zvol_misc:Linux]
tests = ['zvol_misc_fua']
tags = ['functional', 'zvol', 'zvol_misc']

2
tests/zfs-tests/include/commands.cfg
View File

@ -120,10 +120,12 @@ export SYSTEM_FILES_FREEBSD='chflags
showmount showmount
swapctl swapctl
sysctl sysctl
trim
uncompress' uncompress'
export SYSTEM_FILES_LINUX='attr export SYSTEM_FILES_LINUX='attr
blkid blkid
blkdiscard
blockdev blockdev
chattr chattr
exportfs exportfs

41
tests/zfs-tests/include/libtest.shlib
View File

@ -2770,20 +2770,22 @@ function is_te_enabled
svcs -H -o state labeld 2>/dev/null | grep -q "enabled" svcs -H -o state labeld 2>/dev/null | grep -q "enabled"
} }
# Return the number of CPUs (cross-platform)
function get_num_cpus
{
if is_linux ; then
grep -c '^processor' /proc/cpuinfo
elif is_freebsd; then
sysctl -n kern.smp.cpus
else
psrinfo | wc -l
fi
}
# Utility function to determine if a system has multiple cpus. # Utility function to determine if a system has multiple cpus.
function is_mp function is_mp
{ {
case "$UNAME" in [[ $(get_num_cpus) -gt 1 ]]
Linux)
(($(grep -c '^processor' /proc/cpuinfo) > 1))
;;
FreeBSD)
sysctl -n kern.smp.cpus
;;
*)
(($(psrinfo | wc -l) > 1))
;;
esac
} }
function get_cpu_freq function get_cpu_freq
@ -3320,14 +3322,23 @@ function get_tunable_impl
{ {
typeset name="$1" typeset name="$1"
typeset module="${2:-zfs}" typeset module="${2:-zfs}"
typeset check_only="$3"
eval "typeset tunable=\$$name" eval "typeset tunable=\$$name"
case "$tunable" in case "$tunable" in
UNSUPPORTED) UNSUPPORTED)
if [ -z "$check_only" ] ; then
log_unsupported "Tunable '$name' is unsupported on $UNAME" log_unsupported "Tunable '$name' is unsupported on $UNAME"
else
return 1
fi
;; ;;
"") "")
if [ -z "$check_only" ] ; then
log_fail "Tunable '$name' must be added to tunables.cfg" log_fail "Tunable '$name' must be added to tunables.cfg"
else
return 1
fi
;; ;;
*) *)
;; ;;
@ -3347,6 +3358,14 @@ function get_tunable_impl
esac esac
} }
# Does a tunable exist?
#
# $1: Tunable name
function tunable_exists
{
get_tunable_impl $1 "zfs" 1
}
# #
# Compute MD5 digest for given file or stdin if no file given. # Compute MD5 digest for given file or stdin if no file given.
# Note: file path must not contain spaces # Note: file path must not contain spaces

1
tests/zfs-tests/include/tunables.cfg
View File

@ -87,6 +87,7 @@ VDEV_VALIDATE_SKIP vdev.validate_skip vdev_validate_skip
VOL_INHIBIT_DEV UNSUPPORTED zvol_inhibit_dev VOL_INHIBIT_DEV UNSUPPORTED zvol_inhibit_dev
VOL_MODE vol.mode zvol_volmode VOL_MODE vol.mode zvol_volmode
VOL_RECURSIVE vol.recursive UNSUPPORTED VOL_RECURSIVE vol.recursive UNSUPPORTED
VOL_USE_BLK_MQ UNSUPPORTED zvol_use_blk_mq
XATTR_COMPAT xattr_compat zfs_xattr_compat XATTR_COMPAT xattr_compat zfs_xattr_compat
ZEVENT_LEN_MAX zevent.len_max zfs_zevent_len_max ZEVENT_LEN_MAX zevent.len_max zfs_zevent_len_max
ZEVENT_RETAIN_MAX zevent.retain_max zfs_zevent_retain_max ZEVENT_RETAIN_MAX zevent.retain_max zfs_zevent_retain_max

5
tests/zfs-tests/tests/Makefile.am
View File

@ -1966,11 +1966,16 @@ nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \
functional/zvol/zvol_misc/zvol_misc_004_pos.ksh \ functional/zvol/zvol_misc/zvol_misc_004_pos.ksh \
functional/zvol/zvol_misc/zvol_misc_005_neg.ksh \ functional/zvol/zvol_misc/zvol_misc_005_neg.ksh \
functional/zvol/zvol_misc/zvol_misc_006_pos.ksh \ functional/zvol/zvol_misc/zvol_misc_006_pos.ksh \
functional/zvol/zvol_misc/zvol_misc_fua.ksh \
functional/zvol/zvol_misc/zvol_misc_hierarchy.ksh \ functional/zvol/zvol_misc/zvol_misc_hierarchy.ksh \
functional/zvol/zvol_misc/zvol_misc_rename_inuse.ksh \ functional/zvol/zvol_misc/zvol_misc_rename_inuse.ksh \
functional/zvol/zvol_misc/zvol_misc_snapdev.ksh \ functional/zvol/zvol_misc/zvol_misc_snapdev.ksh \
functional/zvol/zvol_misc/zvol_misc_trim.ksh \
functional/zvol/zvol_misc/zvol_misc_volmode.ksh \ functional/zvol/zvol_misc/zvol_misc_volmode.ksh \
functional/zvol/zvol_misc/zvol_misc_zil.ksh \ functional/zvol/zvol_misc/zvol_misc_zil.ksh \
functional/zvol/zvol_stress/cleanup.ksh \
functional/zvol/zvol_stress/setup.ksh \
functional/zvol/zvol_stress/zvol_stress.ksh \
functional/zvol/zvol_swap/cleanup.ksh \ functional/zvol/zvol_swap/cleanup.ksh \
functional/zvol/zvol_swap/setup.ksh \ functional/zvol/zvol_swap/setup.ksh \
functional/zvol/zvol_swap/zvol_swap_001_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_001_pos.ksh \

11
tests/zfs-tests/tests/functional/zvol/zvol_common.shlib
View File

@ -128,3 +128,14 @@ function is_zvol_dumpified
zdb -dddd $volume 2 | grep -q "dumpsize" zdb -dddd $volume 2 | grep -q "dumpsize"
} }
# enable/disable blk-mq (if available)
#
# $1: 1 = enable, 0 = disable
function set_blk_mq
{
# Not all kernels support blk-mq
if tunable_exists VOL_USE_BLK_MQ ; then
log_must set_tunable32 VOL_USE_BLK_MQ $1
fi
}

96
tests/zfs-tests/tests/functional/zvol/zvol_misc/zvol_misc_fua.ksh Executable file
View File

@ -0,0 +1,96 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright (c) 2022 by Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/zvol/zvol_common.shlib
#
# DESCRIPTION:
# Verify that a zvol Force Unit Access (FUA) write works.
#
# STRATEGY:
# 1. dd write 5MB of data with "oflag=dsync,direct" to a zvol. Those flags
# together do a FUA write.
# 3. Verify the data is correct.
# 3. Repeat 1-2 for both the blk-mq and non-blk-mq cases.
verify_runnable "global"
if ! is_physical_device $DISKS; then
log_unsupported "This directory cannot be run on raw files."
fi
if ! is_linux ; then
log_unsupported "Only linux supports dd with oflag=dsync for FUA writes"
fi
typeset datafile1="$(mktemp zvol_misc_fua1.XXXXXX)"
typeset datafile2="$(mktemp zvol_misc_fua2.XXXXXX)"
typeset zvolpath=${ZVOL_DEVDIR}/$TESTPOOL/$TESTVOL
function cleanup
{
rm "$datafile1" "$datafile2"
}
function do_test {
# Wait for udev to create symlinks to our zvol
block_device_wait $zvolpath
# Create a data file
log_must dd if=/dev/urandom of="$datafile1" bs=1M count=5
# Write the data to our zvol using FUA
log_must dd if=$datafile1 of=$zvolpath oflag=dsync,direct bs=1M count=5
# Extract data from our zvol
log_must dd if=$zvolpath of="$datafile2" bs=1M count=5
# Compare the data we expect with what's on our zvol. diff will return
# non-zero if they differ.
log_must diff $datafile1 $datafile2
log_must rm $datafile1 $datafile2
}
log_assert "Verify that a ZFS volume can do Force Unit Access (FUA)"
log_onexit cleanup
log_must zfs set compression=off $TESTPOOL/$TESTVOL
log_note "Testing without blk-mq"
set_blk_mq 0
log_must zpool export $TESTPOOL
log_must zpool import $TESTPOOL
do_test
set_blk_mq 1
log_must zpool export $TESTPOOL
log_must zpool import $TESTPOOL
do_test
log_pass "ZFS volume FUA works"

136
tests/zfs-tests/tests/functional/zvol/zvol_misc/zvol_misc_trim.ksh Executable file
View File

@ -0,0 +1,136 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright (c) 2022 by Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/include/math.shlib
. $STF_SUITE/tests/functional/zvol/zvol_common.shlib
#
# DESCRIPTION:
# Verify we can TRIM a zvol
#
# STRATEGY:
# 1. TRIM the entire zvol to remove data from older tests
# 2. Create a 5MB data file
# 3. Write the file to the zvol
# 4. Observe 5MB of used space on the zvol
# 5. TRIM the first 1MB and last 2MB of the 5MB block of data.
# 6. Observe 2MB of used space on the zvol
# 7. Verify the trimmed regions are zero'd on the zvol
verify_runnable "global"
if is_linux ; then
# We need '--force' here since the prior tests may leave a filesystem
# on the zvol, and blkdiscard will see that filesystem and print a
# warning unless you force it.
#
# Only blkdiscard >= v2.36 supports --force, so we need to
# check for it.
if blkdiscard --help | grep -q '\-\-force' ; then
trimcmd='blkdiscard --force'
else
trimcmd='blkdiscard'
fi
else
# By default, FreeBSD 'trim' always does a dry-run. '-f' makes
# it perform the actual operation.
trimcmd='trim -f'
fi
if ! is_physical_device $DISKS; then
log_unsupported "This directory cannot be run on raw files."
fi
typeset datafile1="$(mktemp zvol_misc_flags1.XXXXXX)"
typeset datafile2="$(mktemp zvol_misc_flags2.XXXXXX)"
typeset zvolpath=${ZVOL_DEVDIR}/$TESTPOOL/$TESTVOL
function cleanup
{
rm "$datafile1" "$datafile2"
}
function do_test {
# Wait for udev to create symlinks to our zvol
block_device_wait $zvolpath
# Create a data file
log_must dd if=/dev/urandom of="$datafile1" bs=1M count=5
# Write to zvol
log_must dd if=$datafile1 of=$zvolpath conv=fsync
# Record how much space we've used (should be 5MB, with 128k
# of tolerance).
before="$(get_prop refer $TESTPOOL/$TESTVOL)"
log_must within_tolerance $before 5242880 131072
# We currently have 5MB of random data on the zvol.
# Trim the first 1MB and also trim 2MB at offset 3MB.
log_must $trimcmd -l $((1 * 1048576)) $zvolpath
log_must $trimcmd -o $((3 * 1048576)) -l $((2 * 1048576)) $zvolpath
sync_pool
# After trimming 3MB, the zvol should have 2MB of data (with 128k of
# tolerance).
after="$(get_prop refer $TESTPOOL/$TESTVOL)"
log_must within_tolerance $after 2097152 131072
# Make the same holes in our test data
log_must dd if=/dev/zero of="$datafile1" bs=1M count=1 conv=notrunc
log_must dd if=/dev/zero of="$datafile1" bs=1M count=2 seek=3 conv=notrunc
# Extract data from our zvol
log_must dd if=$zvolpath of="$datafile2" bs=1M count=5
# Compare the data we expect with what's on our zvol. diff will return
# non-zero if they differ.
log_must diff $datafile1 $datafile2
log_must rm $datafile1 $datafile2
}
log_assert "Verify that a ZFS volume can be TRIMed"
log_onexit cleanup
log_must zfs set compression=off $TESTPOOL/$TESTVOL
# Remove old data from previous tests
log_must $trimcmd $zvolpath
set_blk_mq 1
log_must zpool export $TESTPOOL
log_must zpool import $TESTPOOL
do_test
set_blk_mq 0
log_must zpool export $TESTPOOL
log_must zpool import $TESTPOOL
do_test
log_pass "ZFS volumes can be trimmed"

36
tests/zfs-tests/tests/functional/zvol/zvol_stress/cleanup.ksh Executable file
View File

@ -0,0 +1,36 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2007 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
#
# Copyright (c) 2013 by Delphix. All rights reserved.
#
. $STF_SUITE/include/libtest.shlib
verify_runnable "global"
default_cleanup

36
tests/zfs-tests/tests/functional/zvol/zvol_stress/setup.ksh Executable file
View File

@ -0,0 +1,36 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2009 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
#
# Copyright (c) 2013 by Delphix. All rights reserved.
#
. $STF_SUITE/include/libtest.shlib
verify_runnable "global"
default_setup "$DISKS"

169
tests/zfs-tests/tests/functional/zvol/zvol_stress/zvol_stress.ksh Executable file
View File

@ -0,0 +1,169 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 2022 by Lawrence Livermore National Security, LLC.
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/reservation/reservation.shlib
. $STF_SUITE/tests/functional/zvol/zvol_common.shlib
#
# DESCRIPTION:
# Stress test multithreaded transfers to multiple zvols. Also verify
# zvol errors show up in zpool status.
#
# STRATEGY:
#
# For both the normal submit_bio() codepath and the blk-mq codepath, do
# the following:
#
# 1. Create one zvol per CPU
# 2. In parallel, spawn an fio "write and verify" for each zvol
# 3. Inject write errors
# 4. Write to one of the zvols with dd and verify the errors
#
verify_runnable "global"
num_zvols=$(get_num_cpus)
# If we were making one big zvol from all the pool space, it would
# be this big:
biggest_zvol_size_possible=$(largest_volsize_from_pool $TESTPOOL)
# Crude calculation: take the biggest zvol size we could possibly
# create, knock 10% off it (for overhead) and divide by the number
# of ZVOLs we want to make.
#
# Round the value using a printf
typeset -f each_zvol_size=$(( floor($biggest_zvol_size_possible * 0.9 / \
$num_zvols )))
typeset tmpdir="$(mktemp -d zvol_stress_fio_state.XXXXXX)"
function create_zvols
{
log_note "Creating $num_zvols zvols that are ${each_zvol_size}B each"
for i in $(seq $num_zvols) ; do
log_must zfs create -V $each_zvol_size $TESTPOOL/testvol$i
block_device_wait "$ZVOL_DEVDIR/$TESTPOOL/testvol$i"
done
}
function destroy_zvols
{
for i in $(seq $num_zvols) ; do
log_must_busy zfs destroy $TESTPOOL/testvol$i
done
}
function do_zvol_stress
{
# Write 10% of each zvol, or 50MB, whichever is less
zvol_write_size=$((each_zvol_size / 10))
if [ $zvol_write_size -gt $((50 * 1048576)) ] ; then
zvol_write_size=$((50 * 1048576))
fi
zvol_write_size_mb=$(($zvol_write_size / 1048576))
if is_linux ; then
engine=libaio
else
engine=psync
fi
# Spawn off one fio per zvol in parallel
pids=""
for i in $(seq $num_zvols) ; do
# Spawn one fio per zvol as its own process
fio --ioengine=$engine --name=zvol_stress$i --direct=0 \
--filename="$ZVOL_DEVDIR/$TESTPOOL/testvol$i" --bs=1048576 \
--iodepth=10 --readwrite=randwrite --size=${zvol_write_size} \
--verify_async=2 --numjobs=1 --verify=sha1 \
--verify_fatal=1 \
--continue_on_error=none \
--error_dump=1 \
--exitall_on_error \
--aux-path="$tmpdir" --do_verify=1 &
pids="$pids $!"
done
# Wait for all the spawned fios to finish and look for errors
fail=""
i=0
for pid in $pids ; do
log_note "$s waiting on $pid"
if ! wait $pid ; then
log_fail "fio error on $TESTPOOL/testvol$i"
fi
i=$(($i + 1))
done
}
function cleanup
{
log_must zinject -c all
log_must zpool clear $TESTPOOL
destroy_zvols
set_blk_mq 0
# Remove all fio's leftover state files
if [ -n "$tmpdir" ] ; then
log_must rm -fd "$tmpdir"/*.state "$tmpdir"
fi
}
log_onexit cleanup
log_assert "Stress test zvols"
set_blk_mq 0
create_zvols
# Do some fio write/verifies in parallel
do_zvol_stress
destroy_zvols
# Enable blk-mq (block multi-queue), and re-run the same test
set_blk_mq 1
create_zvols
do_zvol_stress
# Inject some errors, and verify we see some IO errors in zpool status
for DISK in $DISKS ; do
log_must zinject -d $DISK -f 10 -e io -T write $TESTPOOL
done
log_must dd if=/dev/zero of=$ZVOL_DEVDIR/$TESTPOOL/testvol1 bs=512 count=50
log_must zinject -c all
# We should see write errors
typeset -i write_errors=$(zpool status -p | awk '
!NF { isvdev = 0 }
isvdev { errors += $4 }
/CKSUM$/ { isvdev = 1 }
END { print errors }
')
if [ $write_errors -eq 0 ] ; then
log_fail "Expected to see some write errors"
else
log_note "Correctly saw $write_errors write errors"
fi
log_pass "Done with zvol_stress"