From 6b278f3223c0322527836da2e11e33978e54a234 Mon Sep 17 00:00:00 2001 From: Prakash Surya Date: Fri, 22 Sep 2017 18:49:57 -0700 Subject: [PATCH] Add support for "--enable-code-coverage" option This change adds support for a new option that can be passed to the configure script: "--enable-code-coverage". Further, the "--enable-gcov" option has been removed, as this new option provides the same functionality (plus more). When using this new option the following make targets are available: * check-code-coverage * code-coverage-capture * code-coverage-clean Note: these make targets can only be run from the root of the project. Reviewed-by: Brian Behlendorf Signed-off-by: Prakash Surya Closes #6670 --- Makefile.am | 2 + config/Rules.am | 2 + config/ax_code_coverage.m4 | 264 +++++++++++++++++++++++++++++++++++++ config/zfs-build.m4 | 31 ----- configure.ac | 2 +- 5 files changed, 269 insertions(+), 32 deletions(-) create mode 100644 config/ax_code_coverage.m4 diff --git a/Makefile.am b/Makefile.am index 732a373bd..b539ff30f 100644 --- a/Makefile.am +++ b/Makefile.am @@ -23,6 +23,8 @@ EXTRA_DIST = autogen.sh copy-builtin EXTRA_DIST += config/config.awk config/rpm.am config/deb.am config/tgz.am EXTRA_DIST += META DISCLAIMER COPYRIGHT README.markdown OPENSOLARIS.LICENSE +@CODE_COVERAGE_RULES@ + distclean-local:: -$(RM) -R autom4te*.cache -find . \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \ diff --git a/config/Rules.am b/config/Rules.am index 1d39e7779..215f09c34 100644 --- a/config/Rules.am +++ b/config/Rules.am @@ -6,6 +6,7 @@ AM_CFLAGS += ${NO_UNUSED_BUT_SET_VARIABLE} AM_CFLAGS += ${NO_BOOL_COMPARE} AM_CFLAGS += -fno-strict-aliasing AM_CFLAGS += -std=gnu99 +AM_CFLAGS += $(CODE_COVERAGE_CFLAGS) AM_CPPFLAGS = -D_GNU_SOURCE -D__EXTENSIONS__ -D_REENTRANT AM_CPPFLAGS += -D_POSIX_PTHREAD_SEMANTICS -D_FILE_OFFSET_BITS=64 AM_CPPFLAGS += -D_LARGEFILE64_SOURCE -DHAVE_LARGE_STACKS=1 @@ -14,3 +15,4 @@ AM_CPPFLAGS += -DLIBEXECDIR=\"$(libexecdir)\" AM_CPPFLAGS += -DRUNSTATEDIR=\"$(runstatedir)\" AM_CPPFLAGS += -DSBINDIR=\"$(sbindir)\" AM_CPPFLAGS += -DSYSCONFDIR=\"$(sysconfdir)\" +AM_CPPFLAGS += $(CODE_COVERAGE_CPPFLAGS) diff --git a/config/ax_code_coverage.m4 b/config/ax_code_coverage.m4 new file mode 100644 index 000000000..6484f0332 --- /dev/null +++ b/config/ax_code_coverage.m4 @@ -0,0 +1,264 @@ +# =========================================================================== +# https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html +# =========================================================================== +# +# SYNOPSIS +# +# AX_CODE_COVERAGE() +# +# DESCRIPTION +# +# Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS, +# CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included +# in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every +# build target (program or library) which should be built with code +# coverage support. Also defines CODE_COVERAGE_RULES which should be +# substituted in your Makefile; and $enable_code_coverage which can be +# used in subsequent configure output. CODE_COVERAGE_ENABLED is defined +# and substituted, and corresponds to the value of the +# --enable-code-coverage option, which defaults to being disabled. +# +# Test also for gcov program and create GCOV variable that could be +# substituted. +# +# Note that all optimization flags in CFLAGS must be disabled when code +# coverage is enabled. +# +# Usage example: +# +# configure.ac: +# +# AX_CODE_COVERAGE +# +# Makefile.am: +# +# @CODE_COVERAGE_RULES@ +# my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ... +# my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ... +# my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ... +# my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ... +# +# This results in a "check-code-coverage" rule being added to any +# Makefile.am which includes "@CODE_COVERAGE_RULES@" (assuming the module +# has been configured with --enable-code-coverage). Running `make +# check-code-coverage` in that directory will run the module's test suite +# (`make check`) and build a code coverage report detailing the code which +# was touched, then print the URI for the report. +# +# In earlier versions of this macro, CODE_COVERAGE_LDFLAGS was defined +# instead of CODE_COVERAGE_LIBS. They are both still defined, but use of +# CODE_COVERAGE_LIBS is preferred for clarity; CODE_COVERAGE_LDFLAGS is +# deprecated. They have the same value. +# +# This code was derived from Makefile.decl in GLib, originally licenced +# under LGPLv2.1+. +# +# LICENSE +# +# Copyright (c) 2012, 2016 Philip Withnall +# Copyright (c) 2012 Xan Lopez +# Copyright (c) 2012 Christian Persch +# Copyright (c) 2012 Paolo Borelli +# Copyright (c) 2012 Dan Winship +# Copyright (c) 2015 Bastien ROUCARIES +# +# This library is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or (at +# your option) any later version. +# +# This library is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with this program. If not, see . + +#serial 25 + +AC_DEFUN([AX_CODE_COVERAGE],[ + dnl Check for --enable-code-coverage + AC_REQUIRE([AC_PROG_SED]) + + # allow to override gcov location + AC_ARG_WITH([gcov], + [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])], + [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov], + [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov]) + + AC_MSG_CHECKING([whether to build with code coverage support]) + AC_ARG_ENABLE([code-coverage], + AS_HELP_STRING([--enable-code-coverage], + [Whether to enable code coverage support]),, + enable_code_coverage=no) + + AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes]) + AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage]) + AC_MSG_RESULT($enable_code_coverage) + + AS_IF([ test "$enable_code_coverage" = "yes" ], [ + # check for gcov + AC_CHECK_TOOL([GCOV], + [$_AX_CODE_COVERAGE_GCOV_PROG_WITH], + [:]) + AS_IF([test "X$GCOV" = "X:"], + [AC_MSG_ERROR([gcov is needed to do coverage])]) + AC_SUBST([GCOV]) + + dnl Check if gcc is being used + AS_IF([ test "$GCC" = "no" ], [ + AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage]) + ]) + + AC_CHECK_PROG([LCOV], [lcov], [lcov]) + AC_CHECK_PROG([GENHTML], [genhtml], [genhtml]) + + AS_IF([ test -z "$LCOV" ], [ + AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed]) + ]) + + AS_IF([ test -z "$GENHTML" ], [ + AC_MSG_ERROR([Could not find genhtml from the lcov package]) + ]) + + dnl Build the code coverage flags + dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility + CODE_COVERAGE_CPPFLAGS="-DNDEBUG" + CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" + CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" + CODE_COVERAGE_LIBS="-lgcov" + CODE_COVERAGE_LDFLAGS="$CODE_COVERAGE_LIBS" + + AC_SUBST([CODE_COVERAGE_CPPFLAGS]) + AC_SUBST([CODE_COVERAGE_CFLAGS]) + AC_SUBST([CODE_COVERAGE_CXXFLAGS]) + AC_SUBST([CODE_COVERAGE_LIBS]) + AC_SUBST([CODE_COVERAGE_LDFLAGS]) + + [CODE_COVERAGE_RULES_CHECK=' + -$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check + $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture +'] + [CODE_COVERAGE_RULES_CAPTURE=' + $(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS) + $(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS) + -@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp + $(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS) + @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html" +'] + [CODE_COVERAGE_RULES_CLEAN=' +clean: code-coverage-clean +distclean: code-coverage-clean +code-coverage-clean: + -$(LCOV) --directory $(top_builddir) -z + -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY) + -find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete +'] + ], [ + [CODE_COVERAGE_RULES_CHECK=' + @echo "Need to reconfigure with --enable-code-coverage" +'] + CODE_COVERAGE_RULES_CAPTURE="$CODE_COVERAGE_RULES_CHECK" + CODE_COVERAGE_RULES_CLEAN='' + ]) + +[CODE_COVERAGE_RULES=' +# Code coverage +# +# Optional: +# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. +# Multiple directories may be specified, separated by whitespace. +# (Default: $(top_builddir)) +# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated +# by lcov for code coverage. (Default: +# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info) +# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage +# reports to be created. (Default: +# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage) +# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, +# set to 0 to disable it and leave empty to stay with the default. +# (Default: empty) +# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov +# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) +# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov +# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) +# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov +# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the +# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) +# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov +# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) +# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering +# lcov instance. (Default: empty) +# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov +# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) +# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the +# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) +# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml +# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) +# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore +# +# The generated report will be titled using the $(PACKAGE_NAME) and +# $(PACKAGE_VERSION). In order to add the current git hash to the title, +# use the git-version-gen script, available online. + +# Optional variables +CODE_COVERAGE_DIRECTORY ?= $(top_builddir) +CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info +CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage +CODE_COVERAGE_BRANCH_COVERAGE ?= +CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ +--rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) +CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) +CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)" +CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) +CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) +CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= +CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) +CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ +$(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ +--rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) +CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) +CODE_COVERAGE_IGNORE_PATTERN ?= + +GITIGNOREFILES ?= +GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY) + +code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V)) +code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\ + $(CODE_COVERAGE_OUTPUT_FILE); +code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V)) +code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\ + $(CODE_COVERAGE_IGNORE_PATTERN); +code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V)) +code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY); +code_coverage_quiet = $(code_coverage_quiet_$(V)) +code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY)) +code_coverage_quiet_0 = --quiet + +# sanitizes the test-name: replaces with underscores: dashes and dots +code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1))) + +# Use recursive makes in order to ignore errors during check +check-code-coverage:'"$CODE_COVERAGE_RULES_CHECK"' + +# Capture code coverage data +code-coverage-capture: code-coverage-capture-hook'"$CODE_COVERAGE_RULES_CAPTURE"' + +# Hook rule executed before code-coverage-capture, overridable by the user +code-coverage-capture-hook: + +'"$CODE_COVERAGE_RULES_CLEAN"' + +A''M_DISTCHECK_CONFIGURE_FLAGS ?= +A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage + +.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean +'] + + AC_SUBST([CODE_COVERAGE_RULES]) + m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([CODE_COVERAGE_RULES])]) +]) diff --git a/config/zfs-build.m4 b/config/zfs-build.m4 index c695a882e..17cc80462 100644 --- a/config/zfs-build.m4 +++ b/config/zfs-build.m4 @@ -76,37 +76,6 @@ AC_DEFUN([ZFS_AC_DEBUGINFO], [ AC_MSG_RESULT([$enable_debuginfo]) ]) -AC_DEFUN([ZFS_AC_GCOV_KERNEL], [ -]) - -AC_DEFUN([ZFS_AC_GCOV_USER], [ - DEBUG_CFLAGS="$DEBUG_CFLAGS -fprofile-arcs -ftest-coverage" -]) - -AC_DEFUN([ZFS_AC_GCOV], [ - AC_MSG_CHECKING([whether gcov profiling will be enabled]) - AC_ARG_ENABLE([gcov], - [AS_HELP_STRING([--enable-gcov], - [Enable gcov profiling @<:@default=no@:>@])], - [], - [enable_gcov=no]) - - AS_CASE(["x$enable_gcov"], - ["xyes"], - [ZFS_AC_GCOV_KERNEL - ZFS_AC_GCOV_USER], - ["xkernel"], - [ZFS_AC_GCOV_KERNEL], - ["xuser"], - [ZFS_AC_GCOV_USER], - ["xno"], - [], - [AC_MSG_ERROR([Unknown option $enable_gcov])]) - - AC_SUBST(DEBUG_CFLAGS) - AC_MSG_RESULT([$enable_gcov]) -]) - AC_DEFUN([ZFS_AC_CONFIG_ALWAYS], [ ZFS_AC_CONFIG_ALWAYS_NO_UNUSED_BUT_SET_VARIABLE ZFS_AC_CONFIG_ALWAYS_NO_BOOL_COMPARE diff --git a/configure.ac b/configure.ac index ee754fd38..d71712e4c 100644 --- a/configure.ac +++ b/configure.ac @@ -50,13 +50,13 @@ AC_PROG_CC AC_PROG_LIBTOOL AM_PROG_AS AM_PROG_CC_C_O +AX_CODE_COVERAGE ZFS_AC_LICENSE ZFS_AC_PACKAGE ZFS_AC_CONFIG ZFS_AC_DEBUG ZFS_AC_DEBUGINFO -ZFS_AC_GCOV AC_CONFIG_FILES([ Makefile