mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-26 03:09:34 +03:00
vdev_id support for device link aliases
Add a vdev_id feature to map device names based on already defined
udev device links. To increase the odds that vdev_id will run after
the rules it depends on, increase the vdev.rules rule number from 60
to 69. With this change, vdev_id now provides functionality analogous
to zpool_id and zpool_layout, paving the way to retire those tools.
A defined alias takes precedence over a topology-derived name, but the
two naming methods can otherwise coexist. For example, one might name
drives in a JBOD with the sas_direct topology while naming an internal
L2ARC device with an alias.
For example, the following lines in vdev_id.conf will result in the
creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same
target as the device link specified in the third field.
# by-vdev
# name fully qualified or base name of device link
alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca
alias d2 wwn-0x5000c5002def789e
Also perform some minor vdev_id cleanup, such as removal of the unused
-s command line option.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #981
This commit is contained in:
Ned Bass
Brian Behlendorf
parent
e89260a1c8
commit
2957f38d78
@ -11,13 +11,17 @@
|
||||
# default numbering is unsatisfactory. The drive aliases will be
|
||||
# created as symbolic links in /dev/disk/by-vdev.
|
||||
#
|
||||
# The only currently supported topologies are sas_direct and
|
||||
# sas_switch. A multipath mode is supported in which dm-mpath
|
||||
# devices are handled by examining the first-listed running
|
||||
# component disk. In multipath mode the configuration file
|
||||
# should contain a channel definition with the same name for
|
||||
# each path to a given enclosure.
|
||||
|
||||
# The currently supported topologies are sas_direct and sas_switch.
|
||||
# A multipath mode is supported in which dm-mpath devices are
|
||||
# handled by examining the first-listed running component disk. In
|
||||
# multipath mode the configuration file should contain a channel
|
||||
# definition with the same name for each path to a given enclosure.
|
||||
#
|
||||
# The alias keyword provides a simple way to map already-existing
|
||||
# device symlinks to more convenient names. It is suitable for
|
||||
# small, static configurations or for sites that have some automated
|
||||
# way to generate the mapping file.
|
||||
#
|
||||
#
|
||||
# Some example configuration files are given below.
|
||||
|
||||
@ -72,12 +76,19 @@
|
||||
# channel 86:00.0 1 A
|
||||
# channel 86:00.0 0 B
|
||||
|
||||
# #
|
||||
# # Example vdev_id.conf - alias
|
||||
# #
|
||||
#
|
||||
# # by-vdev
|
||||
# # name fully qualified or base name of device link
|
||||
# alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca
|
||||
# alias d2 wwn-0x5000c5002def789e
|
||||
|
||||
PATH=/bin:/sbin:/usr/bin:/usr/sbin
|
||||
CONFIG=/etc/zfs/vdev_id.conf
|
||||
PHYS_PER_PORT=
|
||||
DEV=
|
||||
SLOT_MAP=
|
||||
CHANNEL_MAP=
|
||||
MULTIPATH=
|
||||
TOPOLOGY=
|
||||
|
||||
@ -128,14 +139,188 @@ map_channel() {
|
||||
printf "%s" ${MAPPED_CHAN}
|
||||
}
|
||||
|
||||
while getopts 'c:s:d:g:mp:h' OPTION; do
|
||||
sas_handler() {
|
||||
if [ -z "$PHYS_PER_PORT" ] ; then
|
||||
PHYS_PER_PORT=`awk "/^phys_per_port /{print \\$2;exit}" $CONFIG`
|
||||
fi
|
||||
PHYS_PER_PORT=${PHYS_PER_PORT:-4}
|
||||
if ! echo $PHYS_PER_PORT | grep -q -E '^[0-9]+$' ; then
|
||||
echo "Error: phys_per_port value $PHYS_PER_PORT is non-numeric"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "$MULTIPATH_MODE" ] ; then
|
||||
MULTIPATH_MODE=`awk "/^multipath /{print \\$2; exit}" $CONFIG`
|
||||
fi
|
||||
|
||||
# Use first running component device if we're handling a dm-mpath device
|
||||
if [ "$MULTIPATH_MODE" = "yes" ] ; then
|
||||
# If udev didn't tell us the UUID via DM_NAME, check /dev/mapper
|
||||
if [ -z "$DM_NAME" ] ; then
|
||||
DM_NAME=`ls -l --full-time /dev/mapper |
|
||||
awk "/\/$DEV$/{print \\$9}"`
|
||||
fi
|
||||
|
||||
# For raw disks udev exports DEVTYPE=partition when
|
||||
# handling partitions, and the rules can be written to
|
||||
# take advantage of this to append a -part suffix. For
|
||||
# dm devices we get DEVTYPE=disk even for partitions so
|
||||
# we have to append the -part suffix directly in the
|
||||
# helper.
|
||||
if [ "$DEVTYPE" != "partition" ] ; then
|
||||
PART=`echo $DM_NAME | awk -Fp '/p/{print "-part"$2}'`
|
||||
fi
|
||||
|
||||
# Strip off partition information.
|
||||
DM_NAME=`echo $DM_NAME | sed 's/p[0-9][0-9]*$//'`
|
||||
if [ -z "$DM_NAME" ] ; then
|
||||
return
|
||||
fi
|
||||
|
||||
# Get the raw scsi device name from multipath -l.
|
||||
DEV=`multipath -l $DM_NAME |awk '/running/{print $3 ; exit}'`
|
||||
if [ -z "$DEV" ] ; then
|
||||
return
|
||||
fi
|
||||
fi
|
||||
|
||||
if echo $DEV | grep -q ^/devices/ ; then
|
||||
sys_path=$DEV
|
||||
else
|
||||
sys_path=`udevadm info -q path -p /sys/block/$DEV 2>/dev/null`
|
||||
fi
|
||||
|
||||
# Use positional parameters as an ad-hoc array
|
||||
set -- $(echo "$sys_path" | tr / ' ')
|
||||
num_dirs=$#
|
||||
scsi_host_dir="/sys"
|
||||
|
||||
# Get path up to /sys/.../hostX
|
||||
i=1
|
||||
while [ $i -le $num_dirs ] ; do
|
||||
d=$(eval echo \${$i})
|
||||
scsi_host_dir="$scsi_host_dir/$d"
|
||||
echo $d | grep -q -E '^host[0-9]+$' && break
|
||||
i=$(($i + 1))
|
||||
done
|
||||
|
||||
if [ $i = $num_dirs ] ; then
|
||||
return
|
||||
fi
|
||||
|
||||
PCI_ID=$(eval echo \${$(($i -1))} | awk -F: '{print $2":"$3}')
|
||||
|
||||
# In sas_switch mode, the directory four levels beneath
|
||||
# /sys/.../hostX contains symlinks to phy devices that reveal
|
||||
# the switch port number. In sas_direct mode, the phy links one
|
||||
# directory down reveal the HBA port.
|
||||
port_dir=$scsi_host_dir
|
||||
case $TOPOLOGY in
|
||||
"sas_switch") j=$(($i + 4)) ;;
|
||||
"sas_direct") j=$(($i + 1)) ;;
|
||||
esac
|
||||
|
||||
i=$(($i + 1))
|
||||
while [ $i -le $j ] ; do
|
||||
port_dir="$port_dir/$(eval echo \${$i})"
|
||||
i=$(($i + 1))
|
||||
done
|
||||
|
||||
PHY=`ls -d $port_dir/phy* 2>/dev/null | head -1 | awk -F: '{print $NF}'`
|
||||
if [ -z "$PHY" ] ; then
|
||||
return
|
||||
fi
|
||||
PORT=$(( $PHY / $PHYS_PER_PORT ))
|
||||
|
||||
# Look in /sys/.../sas_device/end_device-X for the bay_identifier
|
||||
# attribute.
|
||||
end_device_dir=$port_dir
|
||||
while [ $i -lt $num_dirs ] ; do
|
||||
d=$(eval echo \${$i})
|
||||
end_device_dir="$end_device_dir/$d"
|
||||
if echo $d | grep -q '^end_device' ; then
|
||||
end_device_dir="$end_device_dir/sas_device/$d"
|
||||
break
|
||||
fi
|
||||
i=$(($i + 1))
|
||||
done
|
||||
|
||||
SLOT=`cat $end_device_dir/bay_identifier 2>/dev/null`
|
||||
if [ -z "$SLOT" ] ; then
|
||||
return
|
||||
fi
|
||||
|
||||
SLOT=`map_slot $SLOT`
|
||||
CHAN=`map_channel $PCI_ID $PORT`
|
||||
if [ -z "$CHAN" ] ; then
|
||||
return
|
||||
fi
|
||||
echo ${CHAN}${SLOT}${PART}
|
||||
}
|
||||
|
||||
alias_handler () {
|
||||
# Special handling is needed to correctly append a -part suffix
|
||||
# to partitions of device mapper devices. The DEVTYPE attribute
|
||||
# is normally set to "disk" instead of "partition" in this case,
|
||||
# so the udev rules won't handle that for us as they do for
|
||||
# "plain" block devices.
|
||||
#
|
||||
# For example, we may have the following links for a device and its
|
||||
# partitions,
|
||||
#
|
||||
# /dev/disk/by-id/dm-name-isw_dibgbfcije_ARRAY0 -> ../../dm-0
|
||||
# /dev/disk/by-id/dm-name-isw_dibgbfcije_ARRAY0p1 -> ../../dm-1
|
||||
# /dev/disk/by-id/dm-name-isw_dibgbfcije_ARRAY0p2 -> ../../dm-3
|
||||
#
|
||||
# and the following alias in vdev_id.conf.
|
||||
#
|
||||
# alias A0 dm-name-isw_dibgbfcije_ARRAY0
|
||||
#
|
||||
# The desired outcome is for the following links to be created
|
||||
# without having explicitly defined aliases for the partitions.
|
||||
#
|
||||
# /dev/disk/by-vdev/A0 -> ../../dm-0
|
||||
# /dev/disk/by-vdev/A0-part1 -> ../../dm-1
|
||||
# /dev/disk/by-vdev/A0-part2 -> ../../dm-3
|
||||
#
|
||||
# Warning: The following grep pattern will misidentify whole-disk
|
||||
# devices whose names end with 'p' followed by a string of
|
||||
# digits as partitions, causing alias creation to fail. This
|
||||
# ambiguity seems unavoidable, so devices using this facility
|
||||
# must not use such names.
|
||||
local DM_PART=
|
||||
if echo $DM_NAME | grep -q -E 'p[0-9][0-9]*$' ; then
|
||||
if [ "$DEVTYPE" != "partition" ] ; then
|
||||
DM_PART=`echo $DM_NAME | awk -Fp '/p/{print "-part"$2}'`
|
||||
fi
|
||||
fi
|
||||
|
||||
# DEVLINKS attribute must have been populated by already-run udev rules.
|
||||
for link in $DEVLINKS ; do
|
||||
# Remove partition information to match key of top-level device.
|
||||
if [ -n "$DM_PART" ] ; then
|
||||
link=`echo $link | sed 's/p[0-9][0-9]*$//'`
|
||||
fi
|
||||
# Check both the fully qualified and the base name of link.
|
||||
for l in $link `basename $link` ; do
|
||||
alias=`awk "/^alias / && \\$3 == \"${l}\" \
|
||||
{ print \\$2; exit }" $CONFIG`
|
||||
if [ -n "$alias" ] ; then
|
||||
echo ${alias}${DM_PART}
|
||||
return
|
||||
fi
|
||||
done
|
||||
done
|
||||
}
|
||||
|
||||
while getopts 'c:d:g:mp:h' OPTION; do
|
||||
case ${OPTION} in
|
||||
c)
|
||||
CONFIG=`readlink -e ${OPTARG}`
|
||||
;;
|
||||
CONFIG=${OPTARG}
|
||||
;;
|
||||
d)
|
||||
DEV=${OPTARG}
|
||||
;;
|
||||
DEV=${OPTARG}
|
||||
;;
|
||||
g)
|
||||
TOPOLOGY=$OPTARG
|
||||
;;
|
||||
@ -145,13 +330,6 @@ while getopts 'c:s:d:g:mp:h' OPTION; do
|
||||
m)
|
||||
MULTIPATH_MODE=yes
|
||||
;;
|
||||
s)
|
||||
SLOT_MAP=`readlink -e ${OPTARG}`
|
||||
if [ ! -r $SLOT_MAP ] ; then
|
||||
echo "Error: $SLOT_MAP is nonexistant or unreadable"
|
||||
exit 1
|
||||
fi
|
||||
;;
|
||||
h)
|
||||
usage
|
||||
;;
|
||||
@ -170,129 +348,24 @@ fi
|
||||
if [ -z "$TOPOLOGY" ] ; then
|
||||
TOPOLOGY=`awk "/^topology /{print \\$2; exit}" $CONFIG`
|
||||
fi
|
||||
TOPOLOGY=${TOPOLOGY:-sas_direct}
|
||||
case $TOPOLOGY in
|
||||
sas_direct|sas_switch)
|
||||
;;
|
||||
*)
|
||||
echo "Error: unknown topology $TOPOLOGY"
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
|
||||
if [ -z "$PHYS_PER_PORT" ] ; then
|
||||
PHYS_PER_PORT=`awk "/^phys_per_port /{print \\$2; exit}" $CONFIG`
|
||||
fi
|
||||
PHYS_PER_PORT=${PHYS_PER_PORT:-4}
|
||||
if ! echo $PHYS_PER_PORT | grep -q -E '^[0-9]+$' ; then
|
||||
echo "Error: phys_per_port value $PHYS_PER_PORT is non-numeric"
|
||||
exit 1
|
||||
# First check if an alias was defined for this device.
|
||||
ID_VDEV=`alias_handler`
|
||||
|
||||
if [ -z "$ID_VDEV" ] ; then
|
||||
TOPOLOGY=${TOPOLOGY:-sas_direct}
|
||||
case $TOPOLOGY in
|
||||
sas_direct|sas_switch)
|
||||
ID_VDEV=`sas_handler`
|
||||
;;
|
||||
*)
|
||||
echo "Error: unknown topology $TOPOLOGY"
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
fi
|
||||
|
||||
if [ -z "$MULTIPATH_MODE" ] ; then
|
||||
MULTIPATH_MODE=`awk "/^multipath /{print \\$2; exit}" $CONFIG`
|
||||
if [ -n "$ID_VDEV" ] ; then
|
||||
echo "ID_VDEV=${ID_VDEV}"
|
||||
echo "ID_VDEV_PATH=disk/by-vdev/${ID_VDEV}"
|
||||
fi
|
||||
|
||||
# Use first running component device if we're handling a dm-mpath device.
|
||||
if [ "$MULTIPATH_MODE" = "yes" ] ; then
|
||||
# If udev didn't tell us the UUID via DM_NAME, find it in /dev/mapper
|
||||
if [ -z "$DM_NAME" ] ; then
|
||||
DM_NAME=`ls -l --full-time /dev/mapper |
|
||||
awk "/\/$DEV$/{print \\$9}"`
|
||||
fi
|
||||
|
||||
# For raw disks udev exports DEVTYPE=partition when handling partitions,
|
||||
# and the rules can be written to take advantage of this to append a
|
||||
# -part suffix. For dm devices we get DEVTYPE=disk even for partitions
|
||||
# so we have to append the -part suffix directly in the helper.
|
||||
if [ "$DEVTYPE" != "partition" ] ; then
|
||||
PART=`echo $DM_NAME | awk -Fp '/p/{print "-part"$2}'`
|
||||
fi
|
||||
|
||||
# Strip off partition information.
|
||||
DM_NAME=`echo $DM_NAME | sed 's/p[0-9][0-9]*$//'`
|
||||
if [ -z "$DM_NAME" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# Get the raw scsi device name from multipath -l.
|
||||
DEV=`multipath -l $DM_NAME |awk '/running/{print $3 ; exit}'`
|
||||
if [ -z "$DEV" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
fi
|
||||
|
||||
if echo $DEV | grep -q ^/devices/ ; then
|
||||
sys_path=$DEV
|
||||
else
|
||||
sys_path=`udevadm info -q path -p /sys/block/$DEV 2>/dev/null`
|
||||
fi
|
||||
|
||||
# Use positional parameters as an ad-hoc array
|
||||
set -- $(echo "$sys_path" | tr / ' ')
|
||||
num_dirs=$#
|
||||
scsi_host_dir="/sys"
|
||||
|
||||
# Get path up to /sys/.../hostX
|
||||
i=1
|
||||
while [ $i -le $num_dirs ] ; do
|
||||
d=$(eval echo \${$i})
|
||||
scsi_host_dir="$scsi_host_dir/$d"
|
||||
echo $d | grep -q -E '^host[0-9]+$' && break
|
||||
i=$(($i + 1))
|
||||
done
|
||||
|
||||
if [ $i = $num_dirs ] ; then
|
||||
exit 0
|
||||
fi
|
||||
|
||||
PCI_ID=$(eval echo \${$(($i -1))} | awk -F: '{print $2":"$3}')
|
||||
|
||||
# In sas_switch mode, the directory four levels beneath /sys/.../hostX
|
||||
# contains symlinks to phy devices that reveal the switch port number. In
|
||||
# sas_direct mode, the phy links one directory down reveal the HBA port.
|
||||
port_dir=$scsi_host_dir
|
||||
case $TOPOLOGY in
|
||||
"sas_switch") j=$(($i + 4)) ;;
|
||||
"sas_direct") j=$(($i + 1)) ;;
|
||||
esac
|
||||
|
||||
i=$(($i + 1))
|
||||
while [ $i -le $j ] ; do
|
||||
port_dir="$port_dir/$(eval echo \${$i})"
|
||||
i=$(($i + 1))
|
||||
done
|
||||
|
||||
PHY=`ls -d $port_dir/phy* 2>/dev/null | head -1 | awk -F: '{print $NF}'`
|
||||
if [ -z "$PHY" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
PORT=$(( $PHY / $PHYS_PER_PORT ))
|
||||
|
||||
# Look in /sys/.../sas_device/end_device-X for the bay_identifier
|
||||
# attribute.
|
||||
end_device_dir=$port_dir
|
||||
while [ $i -lt $num_dirs ] ; do
|
||||
d=$(eval echo \${$i})
|
||||
end_device_dir="$end_device_dir/$d"
|
||||
if echo $d | grep -q '^end_device' ; then
|
||||
end_device_dir="$end_device_dir/sas_device/$d"
|
||||
break
|
||||
fi
|
||||
i=$(($i + 1))
|
||||
done
|
||||
|
||||
SLOT=`cat $end_device_dir/bay_identifier 2>/dev/null`
|
||||
if [ -z "$SLOT" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
|
||||
SLOT=`map_slot $SLOT`
|
||||
CHAN=`map_channel $PCI_ID $PORT`
|
||||
if [ -z "$CHAN" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
ID_VDEV=${CHAN}${SLOT}${PART}
|
||||
|
||||
echo "ID_VDEV=${ID_VDEV}"
|
||||
echo "ID_VDEV_PATH=disk/by-vdev/${ID_VDEV}"
|
||||
|
||||
@ -1,6 +1,7 @@
|
||||
pkgsysconfdir = $(sysconfdir)/zfs
|
||||
|
||||
pkgsysconf_DATA = \
|
||||
vdev_id.conf.alias.example \
|
||||
vdev_id.conf.sas_direct.example \
|
||||
vdev_id.conf.sas_switch.example \
|
||||
vdev_id.conf.multipath.example \
|
||||
|
||||
4
etc/zfs/vdev_id.conf.alias.example
Normal file
4
etc/zfs/vdev_id.conf.alias.example
Normal file
@ -0,0 +1,4 @@
|
||||
# by-vdev
|
||||
# name fully qualified or base name of device link
|
||||
alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca
|
||||
alias d2 wwn-0x5000c5002def789e
|
||||
@ -17,6 +17,22 @@ keyword is ignored. Comments may optionally begin with a hash
|
||||
character.
|
||||
|
||||
The following keywords and values are used.
|
||||
.TP
|
||||
\fIalias\fR <name> <devlink>
|
||||
Maps a device link in the /dev directory hierarchy to a new device
|
||||
name. The udev rule defining the device link must have run prior to
|
||||
.BR vdev_id (8).
|
||||
A defined alias takes precedence over a topology-derived name, but the
|
||||
two naming methods can otherwise coexist. For example, one might name
|
||||
drives in a JBOD with the sas_direct topology while naming an internal
|
||||
L2ARC device with an alias.
|
||||
|
||||
\fIname\fR - the name of the link to the device that will by created in
|
||||
/dev/disk/by-vdev.
|
||||
|
||||
\fIdevlink\fR - the name of the device link that has already been
|
||||
defined by udev. This may be an absolute path or the base filename.
|
||||
|
||||
.TP
|
||||
\fIchannel\fR [pci_slot] <port> <name>
|
||||
Maps a physical path to a channel name (typically representing a single
|
||||
@ -59,7 +75,7 @@ a SAS switch port number
|
||||
|
||||
.TP
|
||||
\fIphys_per_port\fR <num>
|
||||
Specifies the number of PHY devices are associated with a SAS HBA port or SAS
|
||||
Specifies the number of PHY devices associated with a SAS HBA port or SAS
|
||||
switch port.
|
||||
.BR vdev_id (8)
|
||||
internally uses this value to determine which HBA or switch port a
|
||||
@ -150,6 +166,18 @@ definitions - one per physical path.
|
||||
channel 86:00.0 0 B
|
||||
.br
|
||||
.P
|
||||
A configuration using device link aliases.
|
||||
.P
|
||||
.br
|
||||
# by-vdev
|
||||
.br
|
||||
# name fully qualified or base name of device link
|
||||
.br
|
||||
alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca
|
||||
.br
|
||||
alias d2 wwn-0x5000c5002def789e
|
||||
.br
|
||||
.P
|
||||
|
||||
.SH FILES
|
||||
.TP
|
||||
|
||||
@ -19,15 +19,20 @@ drives. Slot numbers may also be re-mapped in case the default
|
||||
numbering is unsatisfactory. The drive aliases will be created as
|
||||
symbolic links in /dev/disk/by-vdev.
|
||||
|
||||
The only currently supported topologies are sas_direct and
|
||||
sas_switch. A multipath mode is supported in which dm-mpath
|
||||
devices are handled by examining the first-listed running
|
||||
component disk as reported by the
|
||||
The currently supported topologies are sas_direct and sas_switch. A
|
||||
multipath mode is supported in which dm-mpath devices are handled by
|
||||
examining the first-listed running component disk as reported by the
|
||||
.BR multipath (8)
|
||||
command. In multipath mode the configuration file should contain a
|
||||
channel definition with the same name for each path to a given
|
||||
enclosure.
|
||||
|
||||
.BR vdev_id
|
||||
also supports creating aliases based on existing udev links in the /dev
|
||||
hierarchy using the \fIalias\fR configuration file keyword. See the
|
||||
.BR vdev_id.conf (5)
|
||||
man page for details.
|
||||
|
||||
.SH OPTIONS
|
||||
.TP
|
||||
\fB\-c\fR <config_file>
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# @udevdir@/rules.d/60-vdev.rules
|
||||
# @udevdir@/rules.d/69-vdev.rules
|
||||
#
|
||||
|
||||
ENV{DEVTYPE}=="disk", IMPORT{program}="@udevdir@/vdev_id -d %k"
|
||||
@ -1,11 +1,11 @@
|
||||
udevrule_DATA = \
|
||||
$(top_srcdir)/udev/rules.d/60-vdev.rules \
|
||||
$(top_srcdir)/udev/rules.d/69-vdev.rules \
|
||||
$(top_srcdir)/udev/rules.d/60-zpool.rules \
|
||||
$(top_srcdir)/udev/rules.d/60-zvol.rules \
|
||||
$(top_srcdir)/udev/rules.d/90-zfs.rules
|
||||
|
||||
EXTRA_DIST = \
|
||||
$(top_srcdir)/udev/rules.d/60-vdev.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/69-vdev.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/60-zpool.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/60-zvol.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/90-zfs.rules.in
|
||||
|
||||
Loading…
Reference in New Issue
Block a user