Add TRIM support

UNMAP/TRIM support is a frequently-requested feature to help
prevent performance from degrading on SSDs and on various other
SAN-like storage back-ends.  By issuing UNMAP/TRIM commands for
sectors which are no longer allocated the underlying device can
often more efficiently manage itself.

This TRIM implementation is modeled on the `zpool initialize`
feature which writes a pattern to all unallocated space in the
pool.  The new `zpool trim` command uses the same vdev_xlate()
code to calculate what sectors are unallocated, the same per-
vdev TRIM thread model and locking, and the same basic CLI for
a consistent user experience.  The core difference is that
instead of writing a pattern it will issue UNMAP/TRIM commands
for those extents.

The zio pipeline was updated to accommodate this by adding a new
ZIO_TYPE_TRIM type and associated spa taskq.  This new type makes
is straight forward to add the platform specific TRIM/UNMAP calls
to vdev_disk.c and vdev_file.c.  These new ZIO_TYPE_TRIM zios are
handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs.
This makes it possible to largely avoid changing the pipieline,
one exception is that TRIM zio's may exceed the 16M block size
limit since they contain no data.

In addition to the manual `zpool trim` command, a background
automatic TRIM was added and is controlled by the 'autotrim'
property.  It relies on the exact same infrastructure as the
manual TRIM.  However, instead of relying on the extents in a
metaslab's ms_allocatable range tree, a ms_trim tree is kept
per metaslab.  When 'autotrim=on', ranges added back to the
ms_allocatable tree are also added to the ms_free tree.  The
ms_free tree is then periodically consumed by an autotrim
thread which systematically walks a top level vdev's metaslabs.

Since the automatic TRIM will skip ranges it considers too small
there is value in occasionally running a full `zpool trim`.  This
may occur when the freed blocks are small and not enough time
was allowed to aggregate them.  An automatic TRIM and a manual
`zpool trim` may be run concurrently, in which case the automatic
TRIM will yield to the manual TRIM.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Contributions-by: Tim Chase <tim@chase2k.com>
Contributions-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8419 
Closes #598
This commit is contained in:
Brian Behlendorf 2019-03-29 09:13:20 -07:00 committed by GitHub
parent f94b3cbf43
commit 1b939560be
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
91 changed files with 5593 additions and 439 deletions

View File

@ -100,6 +100,7 @@ static int zpool_do_split(int, char **);
static int zpool_do_initialize(int, char **);
static int zpool_do_scrub(int, char **);
static int zpool_do_resilver(int, char **);
static int zpool_do_trim(int, char **);
static int zpool_do_import(int, char **);
static int zpool_do_export(int, char **);
@ -154,6 +155,7 @@ typedef enum {
HELP_INITIALIZE,
HELP_SCRUB,
HELP_RESILVER,
HELP_TRIM,
HELP_STATUS,
HELP_UPGRADE,
HELP_EVENTS,
@ -193,7 +195,7 @@ enum iostat_type {
* of all the nvlists a flag requires. Also specifies the order in
* which data gets printed in zpool iostat.
*/
static const char *vsx_type_to_nvlist[IOS_COUNT][11] = {
static const char *vsx_type_to_nvlist[IOS_COUNT][13] = {
[IOS_L_HISTO] = {
ZPOOL_CONFIG_VDEV_TOT_R_LAT_HISTO,
ZPOOL_CONFIG_VDEV_TOT_W_LAT_HISTO,
@ -204,12 +206,14 @@ static const char *vsx_type_to_nvlist[IOS_COUNT][11] = {
ZPOOL_CONFIG_VDEV_ASYNC_R_LAT_HISTO,
ZPOOL_CONFIG_VDEV_ASYNC_W_LAT_HISTO,
ZPOOL_CONFIG_VDEV_SCRUB_LAT_HISTO,
ZPOOL_CONFIG_VDEV_TRIM_LAT_HISTO,
NULL},
[IOS_LATENCY] = {
ZPOOL_CONFIG_VDEV_TOT_R_LAT_HISTO,
ZPOOL_CONFIG_VDEV_TOT_W_LAT_HISTO,
ZPOOL_CONFIG_VDEV_DISK_R_LAT_HISTO,
ZPOOL_CONFIG_VDEV_DISK_W_LAT_HISTO,
ZPOOL_CONFIG_VDEV_TRIM_LAT_HISTO,
NULL},
[IOS_QUEUES] = {
ZPOOL_CONFIG_VDEV_SYNC_R_ACTIVE_QUEUE,
@ -217,6 +221,7 @@ static const char *vsx_type_to_nvlist[IOS_COUNT][11] = {
ZPOOL_CONFIG_VDEV_ASYNC_R_ACTIVE_QUEUE,
ZPOOL_CONFIG_VDEV_ASYNC_W_ACTIVE_QUEUE,
ZPOOL_CONFIG_VDEV_SCRUB_ACTIVE_QUEUE,
ZPOOL_CONFIG_VDEV_TRIM_ACTIVE_QUEUE,
NULL},
[IOS_RQ_HISTO] = {
ZPOOL_CONFIG_VDEV_SYNC_IND_R_HISTO,
@ -229,6 +234,8 @@ static const char *vsx_type_to_nvlist[IOS_COUNT][11] = {
ZPOOL_CONFIG_VDEV_ASYNC_AGG_W_HISTO,
ZPOOL_CONFIG_VDEV_IND_SCRUB_HISTO,
ZPOOL_CONFIG_VDEV_AGG_SCRUB_HISTO,
ZPOOL_CONFIG_VDEV_IND_TRIM_HISTO,
ZPOOL_CONFIG_VDEV_AGG_TRIM_HISTO,
NULL},
};
@ -281,8 +288,9 @@ static zpool_command_t command_table[] = {
{ "split", zpool_do_split, HELP_SPLIT },
{ NULL },
{ "initialize", zpool_do_initialize, HELP_INITIALIZE },
{ "scrub", zpool_do_scrub, HELP_SCRUB },
{ "resilver", zpool_do_resilver, HELP_RESILVER },
{ "scrub", zpool_do_scrub, HELP_SCRUB },
{ "trim", zpool_do_trim, HELP_TRIM },
{ NULL },
{ "import", zpool_do_import, HELP_IMPORT },
{ "export", zpool_do_export, HELP_EXPORT },
@ -370,6 +378,9 @@ get_usage(zpool_help_t idx)
return (gettext("\tscrub [-s | -p] <pool> ...\n"));
case HELP_RESILVER:
return (gettext("\tresilver <pool> ...\n"));
case HELP_TRIM:
return (gettext("\ttrim [-dp] [-r <rate>] [-c | -s] <pool> "
"[<device> ...]\n"));
case HELP_STATUS:
return (gettext("\tstatus [-c [script1,script2,...]] "
"[-igLpPsvxD] [-T d|u] [pool] ... \n"
@ -410,8 +421,12 @@ zpool_collect_leaves(zpool_handle_t *zhp, nvlist_t *nvroot, nvlist_t *res)
&child, &children);
if (children == 0) {
char *path = zpool_vdev_name(g_zfs, zhp, nvroot, B_FALSE);
char *path = zpool_vdev_name(g_zfs, zhp, nvroot,
VDEV_NAME_PATH);
if (strcmp(path, VDEV_TYPE_INDIRECT) != 0)
fnvlist_add_boolean(res, path);
free(path);
return;
}
@ -529,11 +544,11 @@ zpool_do_initialize(int argc, char **argv)
{0, 0, 0, 0}
};
pool_initialize_func_t cmd_type = POOL_INITIALIZE_DO;
pool_initialize_func_t cmd_type = POOL_INITIALIZE_START;
while ((c = getopt_long(argc, argv, "cs", long_options, NULL)) != -1) {
switch (c) {
case 'c':
if (cmd_type != POOL_INITIALIZE_DO &&
if (cmd_type != POOL_INITIALIZE_START &&
cmd_type != POOL_INITIALIZE_CANCEL) {
(void) fprintf(stderr, gettext("-c cannot be "
"combined with other options\n"));
@ -542,7 +557,7 @@ zpool_do_initialize(int argc, char **argv)
cmd_type = POOL_INITIALIZE_CANCEL;
break;
case 's':
if (cmd_type != POOL_INITIALIZE_DO &&
if (cmd_type != POOL_INITIALIZE_START &&
cmd_type != POOL_INITIALIZE_SUSPEND) {
(void) fprintf(stderr, gettext("-s cannot be "
"combined with other options\n"));
@ -585,8 +600,7 @@ zpool_do_initialize(int argc, char **argv)
ZPOOL_CONFIG_VDEV_TREE);
zpool_collect_leaves(zhp, nvroot, vdevs);
} else {
int i;
for (i = 1; i < argc; i++) {
for (int i = 1; i < argc; i++) {
fnvlist_add_boolean(vdevs, argv[i]);
}
}
@ -1801,6 +1815,7 @@ typedef struct status_cbdata {
boolean_t cb_print_status;
boolean_t cb_print_slow_ios;
boolean_t cb_print_vdev_init;
boolean_t cb_print_vdev_trim;
vdev_cmd_data_list_t *vcdl;
} status_cbdata_t;
@ -1869,6 +1884,109 @@ zpool_print_cmd(vdev_cmd_data_list_t *vcdl, const char *pool, char *path)
}
}
/*
* Print vdev initialization status for leaves
*/
static void
print_status_initialize(vdev_stat_t *vs, boolean_t verbose)
{
if (verbose) {
if ((vs->vs_initialize_state == VDEV_INITIALIZE_ACTIVE ||
vs->vs_initialize_state == VDEV_INITIALIZE_SUSPENDED ||
vs->vs_initialize_state == VDEV_INITIALIZE_COMPLETE) &&
!vs->vs_scan_removing) {
char zbuf[1024];
char tbuf[256];
struct tm zaction_ts;
time_t t = vs->vs_initialize_action_time;
int initialize_pct = 100;
if (vs->vs_initialize_state !=
VDEV_INITIALIZE_COMPLETE) {
initialize_pct = (vs->vs_initialize_bytes_done *
100 / (vs->vs_initialize_bytes_est + 1));
}
(void) localtime_r(&t, &zaction_ts);
(void) strftime(tbuf, sizeof (tbuf), "%c", &zaction_ts);
switch (vs->vs_initialize_state) {
case VDEV_INITIALIZE_SUSPENDED:
(void) snprintf(zbuf, sizeof (zbuf), ", %s %s",
gettext("suspended, started at"), tbuf);
break;
case VDEV_INITIALIZE_ACTIVE:
(void) snprintf(zbuf, sizeof (zbuf), ", %s %s",
gettext("started at"), tbuf);
break;
case VDEV_INITIALIZE_COMPLETE:
(void) snprintf(zbuf, sizeof (zbuf), ", %s %s",
gettext("completed at"), tbuf);
break;
}
(void) printf(gettext(" (%d%% initialized%s)"),
initialize_pct, zbuf);
} else {
(void) printf(gettext(" (uninitialized)"));
}
} else if (vs->vs_initialize_state == VDEV_INITIALIZE_ACTIVE) {
(void) printf(gettext(" (initializing)"));
}
}
/*
* Print vdev TRIM status for leaves
*/
static void
print_status_trim(vdev_stat_t *vs, boolean_t verbose)
{
if (verbose) {
if ((vs->vs_trim_state == VDEV_TRIM_ACTIVE ||
vs->vs_trim_state == VDEV_TRIM_SUSPENDED ||
vs->vs_trim_state == VDEV_TRIM_COMPLETE) &&
!vs->vs_scan_removing) {
char zbuf[1024];
char tbuf[256];
struct tm zaction_ts;
time_t t = vs->vs_trim_action_time;
int trim_pct = 100;
if (vs->vs_trim_state != VDEV_TRIM_COMPLETE) {
trim_pct = (vs->vs_trim_bytes_done *
100 / (vs->vs_trim_bytes_est + 1));
}
(void) localtime_r(&t, &zaction_ts);
(void) strftime(tbuf, sizeof (tbuf), "%c", &zaction_ts);
switch (vs->vs_trim_state) {
case VDEV_TRIM_SUSPENDED:
(void) snprintf(zbuf, sizeof (zbuf), ", %s %s",
gettext("suspended, started at"), tbuf);
break;
case VDEV_TRIM_ACTIVE:
(void) snprintf(zbuf, sizeof (zbuf), ", %s %s",
gettext("started at"), tbuf);
break;
case VDEV_TRIM_COMPLETE:
(void) snprintf(zbuf, sizeof (zbuf), ", %s %s",
gettext("completed at"), tbuf);
break;
}
(void) printf(gettext(" (%d%% trimmed%s)"),
trim_pct, zbuf);
} else if (vs->vs_trim_notsup) {
(void) printf(gettext(" (trim unsupported)"));
} else {
(void) printf(gettext(" (untrimmed)"));
}
} else if (vs->vs_trim_state == VDEV_TRIM_ACTIVE) {
(void) printf(gettext(" (trimming)"));
}
}
/*
* Print out configuration state as requested by status_callback.
*/
@ -2049,52 +2167,10 @@ print_status_config(zpool_handle_t *zhp, status_cbdata_t *cb, const char *name,
}
}
/* Optionally display vdev initialization status for leaves */
if (cb->cb_print_vdev_init && children == 0) {
if ((vs->vs_initialize_state == VDEV_INITIALIZE_ACTIVE ||
vs->vs_initialize_state == VDEV_INITIALIZE_SUSPENDED ||
vs->vs_initialize_state == VDEV_INITIALIZE_COMPLETE) &&
!vs->vs_scan_removing) {
char zbuf[1024];
char tbuf[256];
struct tm zaction_ts;
time_t t = vs->vs_initialize_action_time;
int initialize_pct = 100;
if (vs->vs_initialize_state !=
VDEV_INITIALIZE_COMPLETE) {
initialize_pct = (vs->vs_initialize_bytes_done *
100 / (vs->vs_initialize_bytes_est + 1));
}
(void) localtime_r(&t, &zaction_ts);
(void) strftime(tbuf, sizeof (tbuf), "%c", &zaction_ts);
switch (vs->vs_initialize_state) {
case VDEV_INITIALIZE_SUSPENDED:
(void) snprintf(zbuf, sizeof (zbuf),
", suspended, started at %s", tbuf);
break;
case VDEV_INITIALIZE_ACTIVE:
(void) snprintf(zbuf, sizeof (zbuf),
", started at %s", tbuf);
break;
case VDEV_INITIALIZE_COMPLETE:
(void) snprintf(zbuf, sizeof (zbuf),
", completed at %s", tbuf);
break;
}
(void) printf(gettext(" (%d%% initialized%s)"),
initialize_pct, zbuf);
} else {
(void) printf(gettext(" (uninitialized)"));
}
} else {
if (vs->vs_initialize_state == VDEV_INITIALIZE_ACTIVE &&
children == 0) {
(void) printf(gettext(" (initializing)"));
}
/* Display vdev initialization and trim status for leaves */
if (children == 0) {
print_status_initialize(vs, cb->cb_print_vdev_init);
print_status_trim(vs, cb->cb_print_vdev_trim);
}
(void) printf("\n");
@ -3378,22 +3454,22 @@ typedef struct name_and_columns {
unsigned int columns; /* Center name to this number of columns */
} name_and_columns_t;
#define IOSTAT_MAX_LABELS 11 /* Max number of labels on one line */
#define IOSTAT_MAX_LABELS 13 /* Max number of labels on one line */
static const name_and_columns_t iostat_top_labels[][IOSTAT_MAX_LABELS] =
{
[IOS_DEFAULT] = {{"capacity", 2}, {"operations", 2}, {"bandwidth", 2},
{NULL}},
[IOS_LATENCY] = {{"total_wait", 2}, {"disk_wait", 2}, {"syncq_wait", 2},
{"asyncq_wait", 2}, {"scrub"}},
{"asyncq_wait", 2}, {"scrub", 1}, {"trim", 1}, {NULL}},
[IOS_QUEUES] = {{"syncq_read", 2}, {"syncq_write", 2},
{"asyncq_read", 2}, {"asyncq_write", 2}, {"scrubq_read", 2},
{NULL}},
{"trimq_write", 2}, {NULL}},
[IOS_L_HISTO] = {{"total_wait", 2}, {"disk_wait", 2}, {"syncq_wait", 2},
{"asyncq_wait", 2}, {NULL}},
[IOS_RQ_HISTO] = {{"sync_read", 2}, {"sync_write", 2},
{"async_read", 2}, {"async_write", 2}, {"scrub", 2}, {NULL}},
{"async_read", 2}, {"async_write", 2}, {"scrub", 2},
{"trim", 2}, {NULL}},
};
/* Shorthand - if "columns" field not set, default to 1 column */
@ -3402,13 +3478,14 @@ static const name_and_columns_t iostat_bottom_labels[][IOSTAT_MAX_LABELS] =
[IOS_DEFAULT] = {{"alloc"}, {"free"}, {"read"}, {"write"}, {"read"},
{"write"}, {NULL}},
[IOS_LATENCY] = {{"read"}, {"write"}, {"read"}, {"write"}, {"read"},
{"write"}, {"read"}, {"write"}, {"wait"}, {NULL}},
{"write"}, {"read"}, {"write"}, {"wait"}, {"wait"}, {NULL}},
[IOS_QUEUES] = {{"pend"}, {"activ"}, {"pend"}, {"activ"}, {"pend"},
{"activ"}, {"pend"}, {"activ"}, {"pend"}, {"activ"}, {NULL}},
{"activ"}, {"pend"}, {"activ"}, {"pend"}, {"activ"},
{"pend"}, {"activ"}, {NULL}},
[IOS_L_HISTO] = {{"read"}, {"write"}, {"read"}, {"write"}, {"read"},
{"write"}, {"read"}, {"write"}, {"scrub"}, {NULL}},
{"write"}, {"read"}, {"write"}, {"scrub"}, {"trim"}, {NULL}},
[IOS_RQ_HISTO] = {{"ind"}, {"agg"}, {"ind"}, {"agg"}, {"ind"}, {"agg"},
{"ind"}, {"agg"}, {"ind"}, {"agg"}, {NULL}},
{"ind"}, {"agg"}, {"ind"}, {"agg"}, {"ind"}, {"agg"}, {NULL}},
};
static const char *histo_to_title[] = {
@ -3467,6 +3544,8 @@ default_column_width(iostat_cbdata_t *cb, enum iostat_type type)
[IOS_DEFAULT] = 15, /* 1PB capacity */
[IOS_LATENCY] = 10, /* 1B ns = 10sec */
[IOS_QUEUES] = 6, /* 1M queue entries */
[IOS_L_HISTO] = 10, /* 1B ns = 10sec */
[IOS_RQ_HISTO] = 6, /* 1M queue entries */
};
if (cb->cb_literal)
@ -3489,7 +3568,7 @@ print_iostat_labels(iostat_cbdata_t *cb, unsigned int force_column_width,
const name_and_columns_t labels[][IOSTAT_MAX_LABELS])
{
int i, idx, s;
unsigned int text_start, rw_column_width, spaces_to_end;
int text_start, rw_column_width, spaces_to_end;
uint64_t flags = cb->cb_flags;
uint64_t f;
unsigned int column_width = force_column_width;
@ -3515,6 +3594,8 @@ print_iostat_labels(iostat_cbdata_t *cb, unsigned int force_column_width,
text_start = (int)((rw_column_width) / columns -
slen / columns);
if (text_start < 0)
text_start = 0;
printf(" "); /* Two spaces between columns */
@ -3526,9 +3607,11 @@ print_iostat_labels(iostat_cbdata_t *cb, unsigned int force_column_width,
/* Print space after label to end of column */
spaces_to_end = rw_column_width - text_start - slen;
if (spaces_to_end < 0)
spaces_to_end = 0;
for (s = 0; s < spaces_to_end; s++)
printf(" ");
}
}
}
@ -4032,6 +4115,8 @@ print_iostat_queues(iostat_cbdata_t *cb, nvlist_t *oldnv,
ZPOOL_CONFIG_VDEV_ASYNC_W_ACTIVE_QUEUE,
ZPOOL_CONFIG_VDEV_SCRUB_PEND_QUEUE,
ZPOOL_CONFIG_VDEV_SCRUB_ACTIVE_QUEUE,
ZPOOL_CONFIG_VDEV_TRIM_PEND_QUEUE,
ZPOOL_CONFIG_VDEV_TRIM_ACTIVE_QUEUE,
};
struct stat_array *nva;
@ -4070,6 +4155,7 @@ print_iostat_latency(iostat_cbdata_t *cb, nvlist_t *oldnv,
ZPOOL_CONFIG_VDEV_ASYNC_R_LAT_HISTO,
ZPOOL_CONFIG_VDEV_ASYNC_W_LAT_HISTO,
ZPOOL_CONFIG_VDEV_SCRUB_LAT_HISTO,
ZPOOL_CONFIG_VDEV_TRIM_LAT_HISTO,
};
struct stat_array *nva;
@ -6695,6 +6781,126 @@ zpool_do_resilver(int argc, char **argv)
return (for_each_pool(argc, argv, B_TRUE, NULL, scrub_callback, &cb));
}
/*
* zpool trim [-d] [-r <rate>] [-c | -s] <pool> [<device> ...]
*
* -c Cancel. Ends any in-progress trim.
* -d Secure trim. Requires kernel and device support.
* -r <rate> Sets the TRIM rate in bytes (per second). Supports
* adding a multiplier suffix such as 'k' or 'm'.
* -s Suspend. TRIM can then be restarted with no flags.
*/
int
zpool_do_trim(int argc, char **argv)
{
struct option long_options[] = {
{"cancel", no_argument, NULL, 'c'},
{"secure", no_argument, NULL, 'd'},
{"rate", required_argument, NULL, 'r'},
{"suspend", no_argument, NULL, 's'},
{0, 0, 0, 0}
};
pool_trim_func_t cmd_type = POOL_TRIM_START;
uint64_t rate = 0;
boolean_t secure = B_FALSE;
int c;
while ((c = getopt_long(argc, argv, "cdr:s", long_options, NULL))
!= -1) {
switch (c) {
case 'c':
if (cmd_type != POOL_TRIM_START &&
cmd_type != POOL_TRIM_CANCEL) {
(void) fprintf(stderr, gettext("-c cannot be "
"combined with other options\n"));
usage(B_FALSE);
}
cmd_type = POOL_TRIM_CANCEL;
break;
case 'd':
if (cmd_type != POOL_TRIM_START) {
(void) fprintf(stderr, gettext("-d cannot be "
"combined with the -c or -s options\n"));
usage(B_FALSE);
}
secure = B_TRUE;
break;
case 'r':
if (cmd_type != POOL_TRIM_START) {
(void) fprintf(stderr, gettext("-r cannot be "
"combined with the -c or -s options\n"));
usage(B_FALSE);
}
if (zfs_nicestrtonum(NULL, optarg, &rate) == -1) {
(void) fprintf(stderr,
gettext("invalid value for rate\n"));
usage(B_FALSE);
}
break;
case 's':
if (cmd_type != POOL_TRIM_START &&
cmd_type != POOL_TRIM_SUSPEND) {
(void) fprintf(stderr, gettext("-s cannot be "
"combined with other options\n"));
usage(B_FALSE);
}
cmd_type = POOL_TRIM_SUSPEND;
break;
case '?':
if (optopt != 0) {
(void) fprintf(stderr,
gettext("invalid option '%c'\n"), optopt);
} else {
(void) fprintf(stderr,
gettext("invalid option '%s'\n"),
argv[optind - 1]);
}
usage(B_FALSE);
}
}
argc -= optind;
argv += optind;
if (argc < 1) {
(void) fprintf(stderr, gettext("missing pool name argument\n"));
usage(B_FALSE);
return (-1);
}
char *poolname = argv[0];
zpool_handle_t *zhp = zpool_open(g_zfs, poolname);
if (zhp == NULL)
return (-1);
trimflags_t trim_flags = {
.secure = secure,
.rate = rate,
};
nvlist_t *vdevs = fnvlist_alloc();
if (argc == 1) {
/* no individual leaf vdevs specified, so add them all */
nvlist_t *config = zpool_get_config(zhp, NULL);
nvlist_t *nvroot = fnvlist_lookup_nvlist(config,
ZPOOL_CONFIG_VDEV_TREE);
zpool_collect_leaves(zhp, nvroot, vdevs);
trim_flags.fullpool = B_TRUE;
} else {
trim_flags.fullpool = B_FALSE;
for (int i = 1; i < argc; i++) {
fnvlist_add_boolean(vdevs, argv[i]);
}
}
int error = zpool_trim(zhp, cmd_type, vdevs, &trim_flags);
fnvlist_free(vdevs);
zpool_close(zhp);
return (error);
}
/*
* Print out detailed scrub status.
@ -7551,7 +7757,7 @@ status_callback(zpool_handle_t *zhp, void *data)
}
/*
* zpool status [-c [script1,script2,...]] [-igLpPsvx] [-T d|u] [pool] ...
* zpool status [-c [script1,script2,...]] [-igLpPstvx] [-T d|u] [pool] ...
* [interval [count]]
*
* -c CMD For each vdev, run command CMD
@ -7564,6 +7770,7 @@ status_callback(zpool_handle_t *zhp, void *data)
* -v Display complete error logs
* -x Display only pools with potential problems
* -D Display dedup status (undocumented)
* -t Display vdev TRIM status.
* -T Display a timestamp in date(1) or Unix format
*
* Describes the health status of all pools or some subset.
@ -7579,7 +7786,7 @@ zpool_do_status(int argc, char **argv)
char *cmd = NULL;
/* check options */
while ((c = getopt(argc, argv, "c:igLpPsvxDT:")) != -1) {
while ((c = getopt(argc, argv, "c:igLpPsvxDtT:")) != -1) {
switch (c) {
case 'c':
if (cmd != NULL) {
@ -7632,6 +7839,9 @@ zpool_do_status(int argc, char **argv)
case 'D':
cb.cb_dedup_stats = B_TRUE;
break;
case 't':
cb.cb_print_vdev_trim = B_TRUE;
break;
case 'T':
get_timestamp_arg(*optarg);
break;

View File

@ -107,6 +107,7 @@
#include <sys/vdev_impl.h>
#include <sys/vdev_file.h>
#include <sys/vdev_initialize.h>
#include <sys/vdev_trim.h>
#include <sys/spa_impl.h>
#include <sys/metaslab_impl.h>
#include <sys/dsl_prop.h>
@ -374,6 +375,7 @@ ztest_func_t ztest_spa_upgrade;
ztest_func_t ztest_device_removal;
ztest_func_t ztest_spa_checkpoint_create_discard;
ztest_func_t ztest_initialize;
ztest_func_t ztest_trim;
ztest_func_t ztest_fletcher;
ztest_func_t ztest_fletcher_incr;
ztest_func_t ztest_verify_dnode_bt;
@ -427,6 +429,7 @@ ztest_info_t ztest_info[] = {
ZTI_INIT(ztest_device_removal, 1, &zopt_sometimes),
ZTI_INIT(ztest_spa_checkpoint_create_discard, 1, &zopt_rarely),
ZTI_INIT(ztest_initialize, 1, &zopt_sometimes),
ZTI_INIT(ztest_trim, 1, &zopt_sometimes),
ZTI_INIT(ztest_fletcher, 1, &zopt_rarely),
ZTI_INIT(ztest_fletcher_incr, 1, &zopt_rarely),
ZTI_INIT(ztest_verify_dnode_bt, 1, &zopt_sometimes),
@ -4897,7 +4900,7 @@ ztest_dmu_read_write_zcopy(ztest_ds_t *zd, uint64_t id)
umem_free(bigcheck, bigsize);
}
if (i == 2) {
txg_wait_open(dmu_objset_pool(os), 0);
txg_wait_open(dmu_objset_pool(os), 0, B_TRUE);
} else if (i == 3) {
txg_wait_synced(dmu_objset_pool(os), 0);
}
@ -5574,6 +5577,8 @@ ztest_spa_prop_get_set(ztest_ds_t *zd, uint64_t id)
(void) ztest_spa_prop_set_uint64(ZPOOL_PROP_DEDUPDITTO,
ZIO_DEDUPDITTO_MIN + ztest_random(ZIO_DEDUPDITTO_MIN));
(void) ztest_spa_prop_set_uint64(ZPOOL_PROP_AUTOTRIM, ztest_random(2));
VERIFY0(spa_prop_get(ztest_spa, &props));
if (ztest_opts.zo_verbose >= 6)
@ -6484,7 +6489,7 @@ ztest_initialize(ztest_ds_t *zd, uint64_t id)
(void) printf("\n");
}
break;
case POOL_INITIALIZE_DO:
case POOL_INITIALIZE_START:
if (ztest_opts.zo_verbose >= 4) {
(void) printf("Start initialize %s", path);
if (active && error == 0)
@ -6507,6 +6512,82 @@ ztest_initialize(ztest_ds_t *zd, uint64_t id)
mutex_exit(&ztest_vdev_lock);
}
/* ARGSUSED */
void
ztest_trim(ztest_ds_t *zd, uint64_t id)
{
spa_t *spa = ztest_spa;
int error = 0;
mutex_enter(&ztest_vdev_lock);
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
/* Random leaf vdev */
vdev_t *rand_vd = ztest_random_concrete_vdev_leaf(spa->spa_root_vdev);
if (rand_vd == NULL) {
spa_config_exit(spa, SCL_VDEV, FTAG);
mutex_exit(&ztest_vdev_lock);
return;
}
/*
* The random vdev we've selected may change as soon as we
* drop the spa_config_lock. We create local copies of things
* we're interested in.
*/
uint64_t guid = rand_vd->vdev_guid;
char *path = strdup(rand_vd->vdev_path);
boolean_t active = rand_vd->vdev_trim_thread != NULL;
zfs_dbgmsg("vd %p, guid %llu", rand_vd, guid);
spa_config_exit(spa, SCL_VDEV, FTAG);
uint64_t cmd = ztest_random(POOL_TRIM_FUNCS);
uint64_t rate = 1 << ztest_random(30);
boolean_t partial = (ztest_random(5) > 0);
boolean_t secure = (ztest_random(5) > 0);
nvlist_t *vdev_guids = fnvlist_alloc();
nvlist_t *vdev_errlist = fnvlist_alloc();
fnvlist_add_uint64(vdev_guids, path, guid);
error = spa_vdev_trim(spa, vdev_guids, cmd, rate, partial,
secure, vdev_errlist);
fnvlist_free(vdev_guids);
fnvlist_free(vdev_errlist);
switch (cmd) {
case POOL_TRIM_CANCEL:
if (ztest_opts.zo_verbose >= 4) {
(void) printf("Cancel TRIM %s", path);
if (!active)
(void) printf(" failed (no TRIM active)");
(void) printf("\n");
}
break;
case POOL_TRIM_START:
if (ztest_opts.zo_verbose >= 4) {
(void) printf("Start TRIM %s", path);
if (active && error == 0)
(void) printf(" failed (already active)");
else if (error != 0)
(void) printf(" failed (error %d)", error);
(void) printf("\n");
}
break;
case POOL_TRIM_SUSPEND:
if (ztest_opts.zo_verbose >= 4) {
(void) printf("Suspend TRIM %s", path);
if (!active)
(void) printf(" failed (no TRIM active)");
(void) printf("\n");
}
break;
}
free(path);
mutex_exit(&ztest_vdev_lock);
}
/*
* Verify pool integrity by running zdb.
*/

View File

@ -0,0 +1,65 @@
dnl #
dnl # 2.6.32 - 4.x API,
dnl # blk_queue_discard()
dnl #
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_DISCARD], [
AC_MSG_CHECKING([whether blk_queue_discard() is available])
ZFS_LINUX_TRY_COMPILE([
#include <linux/blkdev.h>
],[
struct request_queue *q __attribute__ ((unused)) = NULL;
int value __attribute__ ((unused));
value = blk_queue_discard(q);
],[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_DISCARD, 1,
[blk_queue_discard() is available])
],[
AC_MSG_RESULT(no)
])
])
dnl #
dnl # 4.8 - 4.x API,
dnl # blk_queue_secure_erase()
dnl #
dnl # 2.6.36 - 4.7 API,
dnl # blk_queue_secdiscard()
dnl #
dnl # 2.6.x - 2.6.35 API,
dnl # Unsupported by kernel
dnl #
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_SECURE_ERASE], [
AC_MSG_CHECKING([whether blk_queue_secure_erase() is available])
ZFS_LINUX_TRY_COMPILE([
#include <linux/blkdev.h>
],[
struct request_queue *q __attribute__ ((unused)) = NULL;
int value __attribute__ ((unused));
value = blk_queue_secure_erase(q);
],[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_SECURE_ERASE, 1,
[blk_queue_secure_erase() is available])
],[
AC_MSG_RESULT(no)
AC_MSG_CHECKING([whether blk_queue_secdiscard() is available])
ZFS_LINUX_TRY_COMPILE([
#include <linux/blkdev.h>
],[
struct request_queue *q __attribute__ ((unused)) = NULL;
int value __attribute__ ((unused));
value = blk_queue_secdiscard(q);
],[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_SECDISCARD, 1,
[blk_queue_secdiscard() is available])
],[
AC_MSG_RESULT(no)
])
])
])

View File

@ -164,6 +164,8 @@ AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [
ZFS_AC_KERNEL_IN_COMPAT_SYSCALL
ZFS_AC_KERNEL_KTIME_GET_COARSE_REAL_TS64
ZFS_AC_KERNEL_TOTALRAM_PAGES_FUNC
ZFS_AC_KERNEL_BLK_QUEUE_DISCARD
ZFS_AC_KERNEL_BLK_QUEUE_SECURE_ERASE
AS_IF([test "$LINUX_OBJ" != "$LINUX"], [
KERNEL_MAKE="$KERNEL_MAKE O=$LINUX_OBJ"

View File

@ -263,6 +263,7 @@ AC_CONFIG_FILES([
tests/zfs-tests/tests/functional/cli_root/zpool_split/Makefile
tests/zfs-tests/tests/functional/cli_root/zpool_status/Makefile
tests/zfs-tests/tests/functional/cli_root/zpool_sync/Makefile
tests/zfs-tests/tests/functional/cli_root/zpool_trim/Makefile
tests/zfs-tests/tests/functional/cli_root/zpool_upgrade/Makefile
tests/zfs-tests/tests/functional/cli_root/zpool_upgrade/blockfiles/Makefile
tests/zfs-tests/tests/functional/cli_user/Makefile
@ -328,6 +329,7 @@ AC_CONFIG_FILES([
tests/zfs-tests/tests/functional/alloc_class/Makefile
tests/zfs-tests/tests/functional/threadsappend/Makefile
tests/zfs-tests/tests/functional/tmpfile/Makefile
tests/zfs-tests/tests/functional/trim/Makefile
tests/zfs-tests/tests/functional/truncate/Makefile
tests/zfs-tests/tests/functional/user_namespace/Makefile
tests/zfs-tests/tests/functional/userquota/Makefile

View File

@ -143,6 +143,9 @@ typedef enum zfs_error {
EZFS_INITIALIZING, /* currently initializing */
EZFS_NO_INITIALIZE, /* no active initialize */
EZFS_WRONG_PARENT, /* invalid parent dataset (e.g ZVOL) */
EZFS_TRIMMING, /* currently trimming */
EZFS_NO_TRIM, /* no active trim */
EZFS_TRIM_NOTSUP, /* device does not support trim */
EZFS_UNKNOWN
} zfs_error_t;
@ -253,12 +256,26 @@ typedef struct splitflags {
int name_flags;
} splitflags_t;
typedef struct trimflags {
/* requested vdevs are for the entire pool */
boolean_t fullpool;
/* request a secure trim, requires support from device */
boolean_t secure;
/* trim at the requested rate in bytes/second */
uint64_t rate;
} trimflags_t;
/*
* Functions to manipulate pool and vdev state
*/
extern int zpool_scan(zpool_handle_t *, pool_scan_func_t, pool_scrub_cmd_t);
extern int zpool_initialize(zpool_handle_t *, pool_initialize_func_t,
nvlist_t *);
extern int zpool_trim(zpool_handle_t *, pool_trim_func_t, nvlist_t *,
trimflags_t *);
extern int zpool_clear(zpool_handle_t *, const char *, nvlist_t *);
extern int zpool_reguid(zpool_handle_t *);
extern int zpool_reopen_one(zpool_handle_t *, void *);

View File

@ -64,6 +64,8 @@ int lzc_unload_key(const char *);
int lzc_change_key(const char *, uint64_t, nvlist_t *, uint8_t *, uint_t);
int lzc_initialize(const char *, pool_initialize_func_t, nvlist_t *,
nvlist_t **);
int lzc_trim(const char *, pool_trim_func_t, uint64_t, boolean_t,
nvlist_t *, nvlist_t **);
int lzc_snaprange_space(const char *, const char *, uint64_t *);

View File

@ -608,6 +608,36 @@ blk_queue_discard_granularity(struct request_queue *q, unsigned int dg)
#define blk_queue_discard_granularity(x, dg) ((void)0)
#endif /* HAVE_DISCARD_GRANULARITY */
/*
* 2.6.32 - 4.x API,
* blk_queue_discard()
*/
#if !defined(HAVE_BLK_QUEUE_DISCARD)
#define blk_queue_discard(q) (0);
#endif
/*
* 4.8 - 4.x API,
* blk_queue_secure_erase()
*
* 2.6.36 - 4.7 API,
* blk_queue_secdiscard()
*
* 2.6.x - 2.6.35 API,
* Unsupported by kernel
*/
static inline int
blk_queue_discard_secure(struct request_queue *q)
{
#if defined(HAVE_BLK_QUEUE_SECURE_ERASE)
return (blk_queue_secure_erase(q));
#elif defined(HAVE_BLK_QUEUE_SECDISCARD)
return (blk_queue_secdiscard(q));
#else
return (0);
#endif
}
/*
* Default Linux IO Scheduler,
* Setting the scheduler to noop will allow the Linux IO scheduler to

View File

@ -11,7 +11,6 @@ KERNEL_H = \
$(top_srcdir)/include/spl/sys/ctype.h \
$(top_srcdir)/include/spl/sys/debug.h \
$(top_srcdir)/include/spl/sys/disp.h \
$(top_srcdir)/include/spl/sys/dkioc_free_util.h \
$(top_srcdir)/include/spl/sys/dkio.h \
$(top_srcdir)/include/spl/sys/errno.h \
$(top_srcdir)/include/spl/sys/fcntl.h \

View File

@ -1,58 +0,0 @@
/*
* Copyright (C) 2007-2010 Lawrence Livermore National Security, LLC.
* Copyright (C) 2007 The Regents of the University of California.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* UCRL-CODE-235197
*
* This file is part of the SPL, Solaris Porting Layer.
* For details, see <http://zfsonlinux.org/>.
*
* The SPL is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* The SPL is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with the SPL. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _SPL_DKIOC_UTIL_H
#define _SPL_DKIOC_UTIL_H
#include <sys/dkio.h>
typedef struct dkioc_free_list_ext_s {
uint64_t dfle_start;
uint64_t dfle_length;
} dkioc_free_list_ext_t;
typedef struct dkioc_free_list_s {
uint64_t dfl_flags;
uint64_t dfl_num_exts;
int64_t dfl_offset;
/*
* N.B. this is only an internal debugging API! This is only called
* from debug builds of sd for pre-release checking. Remove before GA!
*/
void (*dfl_ck_func)(uint64_t, uint64_t, void *);
void *dfl_ck_arg;
dkioc_free_list_ext_t dfl_exts[1];
} dkioc_free_list_t;
static inline void dfl_free(dkioc_free_list_t *dfl) {
vmem_free(dfl, DFL_SZ(dfl->dfl_num_exts));
}
static inline dkioc_free_list_t *dfl_alloc(uint64_t dfl_num_exts, int flags) {
return (vmem_zalloc(DFL_SZ(dfl_num_exts), flags));
}
#endif /* _SPL_DKIOC_UTIL_H */

View File

@ -100,6 +100,7 @@ COMMON_H = \
$(top_srcdir)/include/sys/vdev_raidz.h \
$(top_srcdir)/include/sys/vdev_raidz_impl.h \
$(top_srcdir)/include/sys/vdev_removal.h \
$(top_srcdir)/include/sys/vdev_trim.h \
$(top_srcdir)/include/sys/xvattr.h \
$(top_srcdir)/include/sys/zap.h \
$(top_srcdir)/include/sys/zap_impl.h \

View File

@ -244,6 +244,7 @@ typedef enum {
ZPOOL_PROP_MULTIHOST,
ZPOOL_PROP_CHECKPOINT,
ZPOOL_PROP_LOAD_GUID,
ZPOOL_PROP_AUTOTRIM,
ZPOOL_NUM_PROPS
} zpool_prop_t;
@ -635,6 +636,7 @@ typedef struct zpool_load_policy {
#define ZPOOL_CONFIG_VDEV_ASYNC_R_ACTIVE_QUEUE "vdev_async_r_active_queue"
#define ZPOOL_CONFIG_VDEV_ASYNC_W_ACTIVE_QUEUE "vdev_async_w_active_queue"
#define ZPOOL_CONFIG_VDEV_SCRUB_ACTIVE_QUEUE "vdev_async_scrub_active_queue"
#define ZPOOL_CONFIG_VDEV_TRIM_ACTIVE_QUEUE "vdev_async_trim_active_queue"
/* Queue sizes */
#define ZPOOL_CONFIG_VDEV_SYNC_R_PEND_QUEUE "vdev_sync_r_pend_queue"
@ -642,6 +644,7 @@ typedef struct zpool_load_policy {
#define ZPOOL_CONFIG_VDEV_ASYNC_R_PEND_QUEUE "vdev_async_r_pend_queue"
#define ZPOOL_CONFIG_VDEV_ASYNC_W_PEND_QUEUE "vdev_async_w_pend_queue"
#define ZPOOL_CONFIG_VDEV_SCRUB_PEND_QUEUE "vdev_async_scrub_pend_queue"
#define ZPOOL_CONFIG_VDEV_TRIM_PEND_QUEUE "vdev_async_trim_pend_queue"
/* Latency read/write histogram stats */
#define ZPOOL_CONFIG_VDEV_TOT_R_LAT_HISTO "vdev_tot_r_lat_histo"
@ -653,6 +656,7 @@ typedef struct zpool_load_policy {
#define ZPOOL_CONFIG_VDEV_ASYNC_R_LAT_HISTO "vdev_async_r_lat_histo"
#define ZPOOL_CONFIG_VDEV_ASYNC_W_LAT_HISTO "vdev_async_w_lat_histo"
#define ZPOOL_CONFIG_VDEV_SCRUB_LAT_HISTO "vdev_scrub_histo"
#define ZPOOL_CONFIG_VDEV_TRIM_LAT_HISTO "vdev_trim_histo"
/* Request size histograms */
#define ZPOOL_CONFIG_VDEV_SYNC_IND_R_HISTO "vdev_sync_ind_r_histo"
@ -660,11 +664,13 @@ typedef struct zpool_load_policy {
#define ZPOOL_CONFIG_VDEV_ASYNC_IND_R_HISTO "vdev_async_ind_r_histo"
#define ZPOOL_CONFIG_VDEV_ASYNC_IND_W_HISTO "vdev_async_ind_w_histo"
#define ZPOOL_CONFIG_VDEV_IND_SCRUB_HISTO "vdev_ind_scrub_histo"
#define ZPOOL_CONFIG_VDEV_IND_TRIM_HISTO "vdev_ind_trim_histo"
#define ZPOOL_CONFIG_VDEV_SYNC_AGG_R_HISTO "vdev_sync_agg_r_histo"
#define ZPOOL_CONFIG_VDEV_SYNC_AGG_W_HISTO "vdev_sync_agg_w_histo"
#define ZPOOL_CONFIG_VDEV_ASYNC_AGG_R_HISTO "vdev_async_agg_r_histo"
#define ZPOOL_CONFIG_VDEV_ASYNC_AGG_W_HISTO "vdev_async_agg_w_histo"
#define ZPOOL_CONFIG_VDEV_AGG_SCRUB_HISTO "vdev_agg_scrub_histo"
#define ZPOOL_CONFIG_VDEV_AGG_TRIM_HISTO "vdev_agg_trim_histo"
/* Number of slow IOs */
#define ZPOOL_CONFIG_VDEV_SLOW_IOS "vdev_slow_ios"
@ -777,6 +783,7 @@ typedef struct zpool_load_policy {
#define VDEV_ALLOC_BIAS_SPECIAL "special"
#define VDEV_ALLOC_BIAS_DEDUP "dedup"
/* vdev initialize state */
#define VDEV_LEAF_ZAP_INITIALIZE_LAST_OFFSET \
"com.delphix:next_offset_to_initialize"
#define VDEV_LEAF_ZAP_INITIALIZE_STATE \
@ -784,6 +791,20 @@ typedef struct zpool_load_policy {
#define VDEV_LEAF_ZAP_INITIALIZE_ACTION_TIME \
"com.delphix:vdev_initialize_action_time"
/* vdev TRIM state */
#define VDEV_LEAF_ZAP_TRIM_LAST_OFFSET \
"org.zfsonlinux:next_offset_to_trim"
#define VDEV_LEAF_ZAP_TRIM_STATE \
"org.zfsonlinux:vdev_trim_state"
#define VDEV_LEAF_ZAP_TRIM_ACTION_TIME \
"org.zfsonlinux:vdev_trim_action_time"
#define VDEV_LEAF_ZAP_TRIM_RATE \
"org.zfsonlinux:vdev_trim_rate"
#define VDEV_LEAF_ZAP_TRIM_PARTIAL \
"org.zfsonlinux:vdev_trim_partial"
#define VDEV_LEAF_ZAP_TRIM_SECURE \
"org.zfsonlinux:vdev_trim_secure"
/*
* This is needed in userland to report the minimum necessary device size.
*/
@ -915,6 +936,7 @@ typedef enum zio_type {
ZIO_TYPE_FREE,
ZIO_TYPE_CLAIM,
ZIO_TYPE_IOCTL,
ZIO_TYPE_TRIM,
ZIO_TYPES
} zio_type_t;
@ -983,7 +1005,13 @@ typedef enum zpool_errata {
/*
* Vdev statistics. Note: all fields should be 64-bit because this
* is passed between kernel and user land as an nvlist uint64 array.
*
* The vs_ops[] and vs_bytes[] arrays must always be an array size of 6 in
* order to keep subsequent members at their known fixed offsets. When
* adding a new field it must be added to the end the structure.
*/
#define VS_ZIO_TYPES 6
typedef struct vdev_stat {
hrtime_t vs_timestamp; /* time since vdev load */
uint64_t vs_state; /* vdev state */
@ -993,8 +1021,8 @@ typedef struct vdev_stat {
uint64_t vs_dspace; /* deflated capacity */
uint64_t vs_rsize; /* replaceable dev size */
uint64_t vs_esize; /* expandable dev size */
uint64_t vs_ops[ZIO_TYPES]; /* operation count */
uint64_t vs_bytes[ZIO_TYPES]; /* bytes read/written */
uint64_t vs_ops[VS_ZIO_TYPES]; /* operation count */
uint64_t vs_bytes[VS_ZIO_TYPES]; /* bytes read/written */
uint64_t vs_read_errors; /* read errors */
uint64_t vs_write_errors; /* write errors */
uint64_t vs_checksum_errors; /* checksum errors */
@ -1010,6 +1038,12 @@ typedef struct vdev_stat {
uint64_t vs_checkpoint_space; /* checkpoint-consumed space */
uint64_t vs_resilver_deferred; /* resilver deferred */
uint64_t vs_slow_ios; /* slow IOs */
uint64_t vs_trim_errors; /* trimming errors */
uint64_t vs_trim_notsup; /* supported by device */
uint64_t vs_trim_bytes_done; /* bytes trimmed */
uint64_t vs_trim_bytes_est; /* total bytes to trim */
uint64_t vs_trim_state; /* vdev_trim_state_t */
uint64_t vs_trim_action_time; /* time_t */
} vdev_stat_t;
/*
@ -1068,12 +1102,22 @@ typedef struct vdev_stat_ex {
* Initialize functions.
*/
typedef enum pool_initialize_func {
POOL_INITIALIZE_DO,
POOL_INITIALIZE_START,
POOL_INITIALIZE_CANCEL,
POOL_INITIALIZE_SUSPEND,
POOL_INITIALIZE_FUNCS
} pool_initialize_func_t;
/*
* TRIM functions.
*/
typedef enum pool_trim_func {
POOL_TRIM_START,
POOL_TRIM_CANCEL,
POOL_TRIM_SUSPEND,
POOL_TRIM_FUNCS
} pool_trim_func_t;
/*
* DDT statistics. Note: all fields should be 64-bit because this
* is passed between kernel and userland as an nvlist uint64 array.
@ -1126,6 +1170,14 @@ typedef enum {
VDEV_INITIALIZE_COMPLETE
} vdev_initializing_state_t;
typedef enum {
VDEV_TRIM_NONE,
VDEV_TRIM_ACTIVE,
VDEV_TRIM_CANCELED,
VDEV_TRIM_SUSPENDED,
VDEV_TRIM_COMPLETE,
} vdev_trim_state_t;
/*
* nvlist name constants. Facilitate restricting snapshot iteration range for
* the "list next snapshot" ioctl
@ -1224,6 +1276,7 @@ typedef enum zfs_ioc {
ZFS_IOC_POOL_CHECKPOINT, /* 0x5a4d */
ZFS_IOC_POOL_DISCARD_CHECKPOINT, /* 0x5a4e */
ZFS_IOC_POOL_INITIALIZE, /* 0x5a4f */
ZFS_IOC_POOL_TRIM, /* 0x5a50 */
/*
* Linux - 3/64 numbers reserved.
@ -1326,6 +1379,14 @@ typedef enum {
#define ZPOOL_INITIALIZE_COMMAND "initialize_command"
#define ZPOOL_INITIALIZE_VDEVS "initialize_vdevs"
/*
* The following are names used when invoking ZFS_IOC_POOL_TRIM.
*/
#define ZPOOL_TRIM_COMMAND "trim_command"
#define ZPOOL_TRIM_VDEVS "trim_vdevs"
#define ZPOOL_TRIM_RATE "trim_rate"
#define ZPOOL_TRIM_SECURE "trim_secure"
/*
* Flags for ZFS_IOC_VDEV_SET_STATE
*/

View File

@ -120,6 +120,8 @@ void metaslab_group_alloc_decrement(spa_t *, uint64_t, void *, int, int,
boolean_t);
void metaslab_group_alloc_verify(spa_t *, const blkptr_t *, void *, int);
void metaslab_recalculate_weight_and_sort(metaslab_t *);
void metaslab_disable(metaslab_t *);
void metaslab_enable(metaslab_t *, boolean_t);
#ifdef __cplusplus
}

View File

@ -69,7 +69,7 @@ typedef enum trace_alloc_type {
TRACE_ENOSPC = -6ULL,
TRACE_CONDENSING = -7ULL,
TRACE_VDEV_ERROR = -8ULL,
TRACE_INITIALIZING = -9ULL
TRACE_DISABLED = -9ULL,
} trace_alloc_type_t;
#define METASLAB_WEIGHT_PRIMARY (1ULL << 63)
@ -272,10 +272,10 @@ struct metaslab_group {
uint64_t mg_fragmentation;
uint64_t mg_histogram[RANGE_TREE_HISTOGRAM_SIZE];
int mg_ms_initializing;
boolean_t mg_initialize_updating;
kmutex_t mg_ms_initialize_lock;
kcondvar_t mg_ms_initialize_cv;
int mg_ms_disabled;
boolean_t mg_disabled_updating;
kmutex_t mg_ms_disabled_lock;
kcondvar_t mg_ms_disabled_cv;
};
/*
@ -389,11 +389,24 @@ struct metaslab {
range_tree_t *ms_defer[TXG_DEFER_SIZE];
range_tree_t *ms_checkpointing; /* to add to the checkpoint */
/*
* The ms_trim tree is the set of allocatable segments which are
* eligible for trimming. (When the metaslab is loaded, it's a
* subset of ms_allocatable.) It's kept in-core as long as the
* autotrim property is set and is not vacated when the metaslab
* is unloaded. Its purpose is to aggregate freed ranges to
* facilitate efficient trimming.
*/
range_tree_t *ms_trim;
boolean_t ms_condensing; /* condensing? */
boolean_t ms_condense_wanted;
uint64_t ms_condense_checked_txg;
uint64_t ms_initializing; /* leaves initializing this ms */
/*
* The number of consumers which have disabled the metaslab.
*/
uint64_t ms_disabled;
/*
* We must always hold the ms_lock when modifying ms_loaded

View File

@ -738,6 +738,24 @@ typedef enum spa_import_type {
SPA_IMPORT_ASSEMBLE
} spa_import_type_t;
/*
* Send TRIM commands in-line during normal pool operation while deleting.
* OFF: no
* ON: yes
*/
typedef enum {
SPA_AUTOTRIM_OFF = 0, /* default */
SPA_AUTOTRIM_ON
} spa_autotrim_t;
/*
* Reason TRIM command was issued, used internally for accounting purposes.
*/
typedef enum trim_type {
TRIM_TYPE_MANUAL = 0,
TRIM_TYPE_AUTO = 1,
} trim_type_t;
/* state manipulation functions */
extern int spa_open(const char *pool, spa_t **, void *tag);
extern int spa_open_rewind(const char *pool, spa_t **, void *tag,
@ -773,6 +791,8 @@ extern int spa_scan_get_stats(spa_t *spa, pool_scan_stat_t *ps);
#define SPA_ASYNC_REMOVE_DONE 0x40
#define SPA_ASYNC_REMOVE_STOP 0x80
#define SPA_ASYNC_INITIALIZE_RESTART 0x100
#define SPA_ASYNC_TRIM_RESTART 0x200
#define SPA_ASYNC_AUTOTRIM_RESTART 0x400
/*
* Controls the behavior of spa_vdev_remove().
@ -790,6 +810,8 @@ extern int spa_vdev_remove(spa_t *spa, uint64_t guid, boolean_t unspare);
extern boolean_t spa_vdev_remove_active(spa_t *spa);
extern int spa_vdev_initialize(spa_t *spa, nvlist_t *nv, uint64_t cmd_type,
nvlist_t *vdev_errlist);
extern int spa_vdev_trim(spa_t *spa, nvlist_t *nv, uint64_t cmd_type,
uint64_t rate, boolean_t partial, boolean_t secure, nvlist_t *vdev_errlist);
extern int spa_vdev_setpath(spa_t *spa, uint64_t guid, const char *newpath);
extern int spa_vdev_setfru(spa_t *spa, uint64_t guid, const char *newfru);
extern int spa_vdev_split_mirror(spa_t *spa, char *newname, nvlist_t *config,
@ -887,6 +909,7 @@ typedef struct spa_stats {
spa_history_kstat_t io_history;
spa_history_list_t mmp_history;
spa_history_kstat_t state; /* pool state */
spa_history_kstat_t iostats;
} spa_stats_t;
typedef enum txg_state {
@ -905,6 +928,22 @@ typedef struct txg_stat {
uint64_t ndirty;
} txg_stat_t;
/* Assorted pool IO kstats */
typedef struct spa_iostats {
kstat_named_t trim_extents_written;
kstat_named_t trim_bytes_written;
kstat_named_t trim_extents_skipped;
kstat_named_t trim_bytes_skipped;
kstat_named_t trim_extents_failed;
kstat_named_t trim_bytes_failed;
kstat_named_t autotrim_extents_written;
kstat_named_t autotrim_bytes_written;
kstat_named_t autotrim_extents_skipped;
kstat_named_t autotrim_bytes_skipped;
kstat_named_t autotrim_extents_failed;
kstat_named_t autotrim_bytes_failed;
} spa_iostats_t;
extern void spa_stats_init(spa_t *spa);
extern void spa_stats_destroy(spa_t *spa);
extern void spa_read_history_add(spa_t *spa, const zbookmark_phys_t *zb,
@ -922,6 +961,10 @@ extern int spa_mmp_history_set(spa_t *spa, uint64_t mmp_kstat_id, int io_error,
extern void spa_mmp_history_add(spa_t *spa, uint64_t txg, uint64_t timestamp,
uint64_t mmp_delay, vdev_t *vd, int label, uint64_t mmp_kstat_id,
int error);
extern void spa_iostats_trim_add(spa_t *spa, trim_type_t type,
uint64_t extents_written, uint64_t bytes_written,
uint64_t extents_skipped, uint64_t bytes_skipped,
uint64_t extents_failed, uint64_t bytes_failed);
/* Pool configuration locks */
extern int spa_config_tryenter(spa_t *spa, int locks, void *tag, krw_t rw);
@ -1005,6 +1048,7 @@ extern objset_t *spa_meta_objset(spa_t *spa);
extern uint64_t spa_deadman_synctime(spa_t *spa);
extern uint64_t spa_deadman_ziotime(spa_t *spa);
extern uint64_t spa_dirty_data(spa_t *spa);
extern spa_autotrim_t spa_get_autotrim(spa_t *spa);
/* Miscellaneous support routines */
extern void spa_load_failed(spa_t *spa, const char *fmt, ...);

View File

@ -378,6 +378,7 @@ struct spa {
uint64_t spa_deadman_ziotime; /* deadman zio expiration */
uint64_t spa_all_vdev_zaps; /* ZAP of per-vd ZAP obj #s */
spa_avz_action_t spa_avz_action; /* destroy/rebuild AVZ? */
uint64_t spa_autotrim; /* automatic background trim? */
uint64_t spa_errata; /* errata issues detected */
spa_stats_t spa_stats; /* assorted spa statistics */
spa_keystore_t spa_keystore; /* loaded crypto keys */

View File

@ -118,6 +118,11 @@ extern "C" {
#define ESC_ZFS_BOOTFS_VDEV_ATTACH "bootfs_vdev_attach"
#define ESC_ZFS_POOL_REGUID "pool_reguid"
#define ESC_ZFS_HISTORY_EVENT "history_event"
#define ESC_ZFS_TRIM_START "trim_start"
#define ESC_ZFS_TRIM_FINISH "trim_finish"
#define ESC_ZFS_TRIM_CANCEL "trim_cancel"
#define ESC_ZFS_TRIM_RESUME "trim_resume"
#define ESC_ZFS_TRIM_SUSPEND "trim_suspend"
/*
* datalink subclass definitions.

View File

@ -90,10 +90,11 @@ extern void txg_wait_synced(struct dsl_pool *dp, uint64_t txg);
/*
* Wait until the given transaction group, or one after it, is
* the open transaction group. Try to make this happen as soon
* as possible (eg. kick off any necessary syncs immediately).
* If txg == 0, wait for the next open txg.
* as possible (eg. kick off any necessary syncs immediately) when
* should_quiesce is set. If txg == 0, wait for the next open txg.
*/
extern void txg_wait_open(struct dsl_pool *dp, uint64_t txg);
extern void txg_wait_open(struct dsl_pool *dp, uint64_t txg,
boolean_t should_quiesce);
/*
* Returns TRUE if we are "backed up" waiting for the syncing

View File

@ -95,6 +95,8 @@ extern void vdev_metaslab_set_size(vdev_t *);
extern void vdev_expand(vdev_t *vd, uint64_t txg);
extern void vdev_split(vdev_t *vd);
extern void vdev_deadman(vdev_t *vd, char *tag);
extern void vdev_xlate(vdev_t *vd, const range_seg_t *logical_rs,
range_seg_t *physical_rs);
extern void vdev_get_stats_ex(vdev_t *vd, vdev_stat_t *vs, vdev_stat_ex_t *vsx);
extern void vdev_get_stats(vdev_t *vd, vdev_stat_t *vs);

View File

@ -145,6 +145,7 @@ struct vdev_queue {
avl_tree_t vq_active_tree;
avl_tree_t vq_read_offset_tree;
avl_tree_t vq_write_offset_tree;
avl_tree_t vq_trim_offset_tree;
uint64_t vq_last_offset;
hrtime_t vq_io_complete_ts; /* time last i/o completed */
hrtime_t vq_io_delta_ts;
@ -260,6 +261,7 @@ struct vdev {
/* pool checkpoint related */
space_map_t *vdev_checkpoint_sm; /* contains reserved blocks */
/* Initialize related */
boolean_t vdev_initialize_exit_wanted;
vdev_initializing_state_t vdev_initialize_state;
list_node_t vdev_initialize_node;
@ -274,10 +276,34 @@ struct vdev {
uint64_t vdev_initialize_bytes_done;
time_t vdev_initialize_action_time; /* start and end time */
/* for limiting outstanding I/Os */
/* TRIM related */
boolean_t vdev_trim_exit_wanted;
boolean_t vdev_autotrim_exit_wanted;
vdev_trim_state_t vdev_trim_state;
list_node_t vdev_trim_node;
kmutex_t vdev_autotrim_lock;
kcondvar_t vdev_autotrim_cv;
kthread_t *vdev_autotrim_thread;
/* Protects vdev_trim_thread and vdev_trim_state. */
kmutex_t vdev_trim_lock;
kcondvar_t vdev_trim_cv;
kthread_t *vdev_trim_thread;
uint64_t vdev_trim_offset[TXG_SIZE];
uint64_t vdev_trim_last_offset;
uint64_t vdev_trim_bytes_est;
uint64_t vdev_trim_bytes_done;
uint64_t vdev_trim_rate; /* requested rate (bytes/sec) */
uint64_t vdev_trim_partial; /* requested partial TRIM */
uint64_t vdev_trim_secure; /* requested secure TRIM */
time_t vdev_trim_action_time; /* start and end time */
/* for limiting outstanding I/Os (initialize and TRIM) */
kmutex_t vdev_initialize_io_lock;
kcondvar_t vdev_initialize_io_cv;
uint64_t vdev_initialize_inflight;
kmutex_t vdev_trim_io_lock;
kcondvar_t vdev_trim_io_cv;
uint64_t vdev_trim_inflight[2];
/*
* Values stored in the config for an indirect or removing vdev.
@ -343,6 +369,8 @@ struct vdev {
uint64_t vdev_not_present; /* not present during import */
uint64_t vdev_unspare; /* unspare when resilvering done */
boolean_t vdev_nowritecache; /* true if flushwritecache failed */
boolean_t vdev_has_trim; /* TRIM is supported */
boolean_t vdev_has_securetrim; /* secure TRIM is supported */
boolean_t vdev_checkremove; /* temporary online test */
boolean_t vdev_forcefault; /* force online fault */
boolean_t vdev_splitting; /* split or repair in progress */

View File

@ -39,8 +39,6 @@ extern void vdev_initialize_stop_all(vdev_t *vd,
vdev_initializing_state_t tgt_state);
extern void vdev_initialize_stop_wait(spa_t *spa, list_t *vd_list);
extern void vdev_initialize_restart(vdev_t *vd);
extern void vdev_xlate(vdev_t *vd, const range_seg_t *logical_rs,
range_seg_t *physical_rs);
#ifdef __cplusplus
}

52
include/sys/vdev_trim.h Normal file
View File

@ -0,0 +1,52 @@
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2019 Lawrence Livermore National Security, LLC.
*/
#ifndef _SYS_VDEV_TRIM_H
#define _SYS_VDEV_TRIM_H
#include <sys/spa.h>
#ifdef __cplusplus
extern "C" {
#endif
extern unsigned int zfs_trim_metaslab_skip;
extern void vdev_trim(vdev_t *vd, uint64_t rate, boolean_t partial,
boolean_t secure);
extern void vdev_trim_stop(vdev_t *vd, vdev_trim_state_t tgt, list_t *vd_list);
extern void vdev_trim_stop_all(vdev_t *vd, vdev_trim_state_t tgt_state);
extern void vdev_trim_stop_wait(spa_t *spa, list_t *vd_list);
extern void vdev_trim_restart(vdev_t *vd);
extern void vdev_autotrim(spa_t *spa);
extern void vdev_autotrim_stop_all(spa_t *spa);
extern void vdev_autotrim_stop_wait(vdev_t *vd);
extern void vdev_autotrim_restart(spa_t *spa);
#ifdef __cplusplus
}
#endif
#endif /* _SYS_VDEV_TRIM_H */

View File

@ -579,6 +579,8 @@ typedef struct vsecattr {
#define CRCREAT 0
#define F_FREESP 11
extern int fop_getattr(vnode_t *vp, vattr_t *vap);
#define VOP_CLOSE(vp, f, c, o, cr, ct) vn_close(vp)
@ -587,6 +589,16 @@ extern int fop_getattr(vnode_t *vp, vattr_t *vap);
#define VOP_FSYNC(vp, f, cr, ct) fsync((vp)->v_fd)
#if defined(HAVE_FILE_FALLOCATE) && \
defined(FALLOC_FL_PUNCH_HOLE) && \
defined(FALLOC_FL_KEEP_SIZE)
#define VOP_SPACE(vp, cmd, flck, fl, off, cr, ct) \
fallocate((vp)->v_fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, \
(flck)->l_start, (flck)->l_len)
#else
#define VOP_SPACE(vp, cmd, flck, fl, off, cr, ct) (0)
#endif
#define VN_RELE(vp) vn_close(vp)
extern int vn_open(char *path, int x1, int oflags, int mode, vnode_t **vpp,

View File

@ -54,6 +54,7 @@ extern int zfs_dbgmsg_enable;
#define ZFS_DEBUG_METASLAB_VERIFY (1 << 8)
#define ZFS_DEBUG_SET_ERROR (1 << 9)
#define ZFS_DEBUG_INDIRECT_REMAP (1 << 10)
#define ZFS_DEBUG_TRIM (1 << 11)
extern void __zfs_dbgmsg(char *buf);
extern void __dprintf(boolean_t dprint, const char *file, const char *func,

View File

@ -416,6 +416,14 @@ typedef zio_t *zio_pipe_stage_t(zio_t *zio);
#define ZIO_REEXECUTE_NOW 0x01
#define ZIO_REEXECUTE_SUSPEND 0x02
/*
* The io_trim flags are used to specify the type of TRIM to perform. They
* only apply to ZIO_TYPE_TRIM zios are distinct from io_flags.
*/
enum trim_flag {
ZIO_TRIM_SECURE = 1 << 0,
};
typedef struct zio_alloc_list {
list_t zal_list;
uint64_t zal_size;
@ -434,6 +442,7 @@ struct zio {
zio_prop_t io_prop;
zio_type_t io_type;
enum zio_child io_child_type;
enum trim_flag io_trim_flags;
int io_cmd;
zio_priority_t io_priority;
uint8_t io_reexecute;
@ -549,6 +558,10 @@ extern zio_t *zio_claim(zio_t *pio, spa_t *spa, uint64_t txg,
extern zio_t *zio_ioctl(zio_t *pio, spa_t *spa, vdev_t *vd, int cmd,
zio_done_func_t *done, void *private, enum zio_flag flags);
extern zio_t *zio_trim(zio_t *pio, vdev_t *vd, uint64_t offset, uint64_t size,
zio_done_func_t *done, void *private, zio_priority_t priority,
enum zio_flag flags, enum trim_flag trim_flags);
extern zio_t *zio_read_phys(zio_t *pio, vdev_t *vd, uint64_t offset,
uint64_t size, struct abd *data, int checksum,
zio_done_func_t *done, void *private, zio_priority_t priority,

View File

@ -250,6 +250,11 @@ enum zio_stage {
ZIO_STAGE_VDEV_IO_START | \
ZIO_STAGE_VDEV_IO_ASSESS)
#define ZIO_TRIM_PIPELINE \
(ZIO_INTERLOCK_STAGES | \
ZIO_STAGE_ISSUE_ASYNC | \
ZIO_VDEV_IO_STAGES)
#define ZIO_BLOCKING_STAGES \
(ZIO_STAGE_DVA_ALLOCATE | \
ZIO_STAGE_DVA_CLAIM | \

View File

@ -30,6 +30,7 @@ typedef enum zio_priority {
ZIO_PRIORITY_SCRUB, /* asynchronous scrub/resilver reads */
ZIO_PRIORITY_REMOVAL, /* reads/writes for vdev removal */
ZIO_PRIORITY_INITIALIZING, /* initializing I/O */
ZIO_PRIORITY_TRIM, /* trim I/O (discard) */
ZIO_PRIORITY_NUM_QUEUEABLE,
ZIO_PRIORITY_NOW, /* non-queued i/os (e.g. free) */
} zio_priority_t;

View File

@ -2092,6 +2092,57 @@ zpool_import_props(libzfs_handle_t *hdl, nvlist_t *config, const char *newname,
return (ret);
}
/*
* Translate vdev names to guids. If a vdev_path is determined to be
* unsuitable then a vd_errlist is allocated and the vdev path and errno
* are added to it.
*/
static int
zpool_translate_vdev_guids(zpool_handle_t *zhp, nvlist_t *vds,
nvlist_t *vdev_guids, nvlist_t *guids_to_paths, nvlist_t **vd_errlist)
{
nvlist_t *errlist = NULL;
int error = 0;
for (nvpair_t *elem = nvlist_next_nvpair(vds, NULL); elem != NULL;
elem = nvlist_next_nvpair(vds, elem)) {
boolean_t spare, cache;
char *vd_path = nvpair_name(elem);
nvlist_t *tgt = zpool_find_vdev(zhp, vd_path, &spare, &cache,
NULL);
if ((tgt == NULL) || cache || spare) {
if (errlist == NULL) {
errlist = fnvlist_alloc();
error = EINVAL;
}
uint64_t err = (tgt == NULL) ? EZFS_NODEVICE :
(spare ? EZFS_ISSPARE : EZFS_ISL2CACHE);
fnvlist_add_int64(errlist, vd_path, err);
continue;
}
uint64_t guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID);
fnvlist_add_uint64(vdev_guids, vd_path, guid);
char msg[MAXNAMELEN];
(void) snprintf(msg, sizeof (msg), "%llu", (u_longlong_t)guid);
fnvlist_add_string(guids_to_paths, msg, vd_path);
}
if (error != 0) {
verify(errlist != NULL);
if (vd_errlist != NULL)
*vd_errlist = errlist;
else
fnvlist_free(errlist);
}
return (error);
}
static int
xlate_init_err(int err)
{
@ -2118,50 +2169,26 @@ zpool_initialize(zpool_handle_t *zhp, pool_initialize_func_t cmd_type,
nvlist_t *vds)
{
char msg[1024];
libzfs_handle_t *hdl = zhp->zpool_hdl;
int err;
nvlist_t *errlist;
/* translate vdev names to guids */
nvlist_t *vdev_guids = fnvlist_alloc();
nvlist_t *guids_to_paths = fnvlist_alloc();
boolean_t spare, cache;
nvlist_t *tgt;
nvlist_t *vd_errlist = NULL;
nvlist_t *errlist;
nvpair_t *elem;
for (elem = nvlist_next_nvpair(vds, NULL); elem != NULL;
elem = nvlist_next_nvpair(vds, elem)) {
char *vd_path = nvpair_name(elem);
tgt = zpool_find_vdev(zhp, vd_path, &spare, &cache, NULL);
if ((tgt == NULL) || cache || spare) {
(void) snprintf(msg, sizeof (msg),
dgettext(TEXT_DOMAIN, "cannot initialize '%s'"),
vd_path);
int err = (tgt == NULL) ? EZFS_NODEVICE :
(spare ? EZFS_ISSPARE : EZFS_ISL2CACHE);
fnvlist_free(vdev_guids);
fnvlist_free(guids_to_paths);
return (zfs_error(hdl, err, msg));
}
uint64_t guid = fnvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID);
fnvlist_add_uint64(vdev_guids, vd_path, guid);
(void) snprintf(msg, sizeof (msg), "%llu", (u_longlong_t)guid);
fnvlist_add_string(guids_to_paths, msg, vd_path);
}
int err = lzc_initialize(zhp->zpool_name, cmd_type, vdev_guids,
&errlist);
fnvlist_free(vdev_guids);
err = zpool_translate_vdev_guids(zhp, vds, vdev_guids,
guids_to_paths, &vd_errlist);
if (err == 0) {
err = lzc_initialize(zhp->zpool_name, cmd_type,
vdev_guids, &errlist);
if (err == 0) {
fnvlist_free(vdev_guids);
fnvlist_free(guids_to_paths);
return (0);
}
nvlist_t *vd_errlist = NULL;
if (errlist != NULL) {
vd_errlist = fnvlist_lookup_nvlist(errlist,
ZPOOL_INITIALIZE_VDEVS);
@ -2169,21 +2196,125 @@ zpool_initialize(zpool_handle_t *zhp, pool_initialize_func_t cmd_type,
(void) snprintf(msg, sizeof (msg),
dgettext(TEXT_DOMAIN, "operation failed"));
} else {
verify(vd_errlist != NULL);
}
for (elem = nvlist_next_nvpair(vd_errlist, NULL); elem != NULL;
elem = nvlist_next_nvpair(vd_errlist, elem)) {
int64_t vd_error = xlate_init_err(fnvpair_value_int64(elem));
char *path = fnvlist_lookup_string(guids_to_paths,
nvpair_name(elem));
(void) zfs_error_fmt(hdl, vd_error, "cannot initialize '%s'",
path);
char *path;
if (nvlist_lookup_string(guids_to_paths, nvpair_name(elem),
&path) != 0)
path = nvpair_name(elem);
(void) zfs_error_fmt(zhp->zpool_hdl, vd_error,
"cannot initialize '%s'", path);
}
fnvlist_free(vdev_guids);
fnvlist_free(guids_to_paths);
if (vd_errlist != NULL)
return (-1);
return (zpool_standard_error(hdl, err, msg));
if (vd_errlist != NULL) {
fnvlist_free(vd_errlist);
return (-1);
}
return (zpool_standard_error(zhp->zpool_hdl, err, msg));
}
static int
xlate_trim_err(int err)
{
switch (err) {
case ENODEV:
return (EZFS_NODEVICE);
case EINVAL:
case EROFS:
return (EZFS_BADDEV);
case EBUSY:
return (EZFS_TRIMMING);
case ESRCH:
return (EZFS_NO_TRIM);
case EOPNOTSUPP:
return (EZFS_TRIM_NOTSUP);
}
return (err);
}
/*
* Begin, suspend, or cancel the TRIM (discarding of all free blocks) for
* the given vdevs in the given pool.
*/
int
zpool_trim(zpool_handle_t *zhp, pool_trim_func_t cmd_type, nvlist_t *vds,
trimflags_t *trim_flags)
{
char msg[1024];
int err;
nvlist_t *vdev_guids = fnvlist_alloc();
nvlist_t *guids_to_paths = fnvlist_alloc();
nvlist_t *vd_errlist = NULL;
nvlist_t *errlist;
nvpair_t *elem;
err = zpool_translate_vdev_guids(zhp, vds, vdev_guids,
guids_to_paths, &vd_errlist);
if (err == 0) {
err = lzc_trim(zhp->zpool_name, cmd_type, trim_flags->rate,
trim_flags->secure, vdev_guids, &errlist);
if (err == 0) {
fnvlist_free(vdev_guids);
fnvlist_free(guids_to_paths);
return (0);
}
if (errlist != NULL) {
vd_errlist = fnvlist_lookup_nvlist(errlist,
ZPOOL_TRIM_VDEVS);
}
(void) snprintf(msg, sizeof (msg),
dgettext(TEXT_DOMAIN, "operation failed"));
} else {
verify(vd_errlist != NULL);
}
for (elem = nvlist_next_nvpair(vd_errlist, NULL);
elem != NULL; elem = nvlist_next_nvpair(vd_errlist, elem)) {
int64_t vd_error = xlate_trim_err(fnvpair_value_int64(elem));
char *path;
/*
* If only the pool was specified, and it was not a secure
* trim then suppress warnings for individual vdevs which
* do not support trimming.
*/
if (vd_error == EZFS_TRIM_NOTSUP &&
trim_flags->fullpool &&
!trim_flags->secure) {
continue;
}
if (nvlist_lookup_string(guids_to_paths, nvpair_name(elem),
&path) != 0)
path = nvpair_name(elem);
(void) zfs_error_fmt(zhp->zpool_hdl, vd_error,
"cannot trim '%s'", path);
}
fnvlist_free(vdev_guids);
fnvlist_free(guids_to_paths);
if (vd_errlist != NULL) {
fnvlist_free(vd_errlist);
return (-1);
}
return (zpool_standard_error(zhp->zpool_hdl, err, msg));
}
/*

View File

@ -292,6 +292,13 @@ libzfs_error_description(libzfs_handle_t *hdl)
"initialization"));
case EZFS_WRONG_PARENT:
return (dgettext(TEXT_DOMAIN, "invalid parent dataset"));
case EZFS_TRIMMING:
return (dgettext(TEXT_DOMAIN, "currently trimming"));
case EZFS_NO_TRIM:
return (dgettext(TEXT_DOMAIN, "there is no active trim"));
case EZFS_TRIM_NOTSUP:
return (dgettext(TEXT_DOMAIN, "trim operations are not "
"supported by this device"));
case EZFS_UNKNOWN:
return (dgettext(TEXT_DOMAIN, "unknown error"));
default:

View File

@ -1412,7 +1412,8 @@ lzc_reopen(const char *pool_name, boolean_t scrub_restart)
* - ENODEV if the device was not found
* - EINVAL if the devices is not a leaf or is not concrete (e.g. missing)
* - EROFS if the device is not writeable
* - EBUSY start requested but the device is already being initialized
* - EBUSY start requested but the device is already being either
* initialized or trimmed
* - ESRCH cancel/suspend requested but device is not being initialized
*
* If the errlist is empty, then return value will be:
@ -1425,6 +1426,7 @@ lzc_initialize(const char *poolname, pool_initialize_func_t cmd_type,
nvlist_t *vdevs, nvlist_t **errlist)
{
int error;
nvlist_t *args = fnvlist_alloc();
fnvlist_add_uint64(args, ZPOOL_INITIALIZE_COMMAND, (uint64_t)cmd_type);
fnvlist_add_nvlist(args, ZPOOL_INITIALIZE_VDEVS, vdevs);
@ -1435,3 +1437,45 @@ lzc_initialize(const char *poolname, pool_initialize_func_t cmd_type,
return (error);
}
/*
* Changes TRIM state.
*
* vdevs should be a list of (<key>, guid) where guid is a uint64 vdev GUID.
* The key is ignored.
*
* If there are errors related to vdev arguments, per-vdev errors are returned
* in an nvlist with the key "vdevs". Each error is a (guid, errno) pair where
* guid is stringified with PRIu64, and errno is one of the following as
* an int64_t:
* - ENODEV if the device was not found
* - EINVAL if the devices is not a leaf or is not concrete (e.g. missing)
* - EROFS if the device is not writeable
* - EBUSY start requested but the device is already being either trimmed
* or initialized
* - ESRCH cancel/suspend requested but device is not being initialized
* - EOPNOTSUPP if the device does not support TRIM (or secure TRIM)
*
* If the errlist is empty, then return value will be:
* - EINVAL if one or more arguments was invalid
* - Other spa_open failures
* - 0 if the operation succeeded
*/
int
lzc_trim(const char *poolname, pool_trim_func_t cmd_type, uint64_t rate,
boolean_t secure, nvlist_t *vdevs, nvlist_t **errlist)
{
int error;
nvlist_t *args = fnvlist_alloc();
fnvlist_add_uint64(args, ZPOOL_TRIM_COMMAND, (uint64_t)cmd_type);
fnvlist_add_nvlist(args, ZPOOL_TRIM_VDEVS, vdevs);
fnvlist_add_uint64(args, ZPOOL_TRIM_RATE, rate);
fnvlist_add_boolean_value(args, ZPOOL_TRIM_SECURE, secure);
error = lzc_ioctl(ZFS_IOC_POOL_TRIM, poolname, args, errlist);
fnvlist_free(args);
return (error);
}

View File

@ -130,6 +130,7 @@ KERNEL_C = \
vdev_raidz_math_ssse3.c \
vdev_removal.c \
vdev_root.c \
vdev_trim.c \
zap.c \
zap_leaf.c \
zap_micro.c \

View File

@ -14,7 +14,7 @@
.\" CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your
.\" own identifying information:
.\" Portions Copyright [yyyy] [name of copyright owner]
.TH ZFS-MODULE-PARAMETERS 5 "Feb 8, 2019"
.TH ZFS-MODULE-PARAMETERS 5 "Feb 15, 2019"
.SH NAME
zfs\-module\-parameters \- ZFS module parameters
.SH DESCRIPTION
@ -1532,6 +1532,30 @@ See the section "ZFS I/O SCHEDULER".
Default value: \fB10\fR.
.RE
.sp
.ne 2
.na
\fBzfs_vdev_trim_max_active\fR (int)
.ad
.RS 12n
Maximum trim/discard I/Os active to each device.
See the section "ZFS I/O SCHEDULER".
.sp
Default value: \fB2\fR.
.RE
.sp
.ne 2
.na
\fBzfs_vdev_trim_min_active\fR (int)
.ad
.RS 12n
Minimum trim/discard I/Os active to each device.
See the section "ZFS I/O SCHEDULER".
.sp
Default value: \fB1\fR.
.RE
.sp
.ne 2
.na
@ -1619,6 +1643,12 @@ _
_
512 ZFS_DEBUG_SET_ERROR
Enable SET_ERROR and dprintf entries in the debug log.
_
1024 ZFS_DEBUG_INDIRECT_REMAP
Verify split blocks created by device removal.
_
2048 ZFS_DEBUG_TRIM
Verify TRIM ranges are always within the allocatable range tree.
.TE
.sp
* Requires debug build.
@ -2341,6 +2371,82 @@ value of 75% will create a maximum of one thread per cpu.
Default value: \fB75\fR%.
.RE
.sp
.ne 2
.na
\fBzfs_trim_extent_bytes_max\fR (unsigned int)
.ad
.RS 12n
Maximum size of TRIM command. Ranges larger than this will be split in to
chunks no larger than \fBzfs_trim_extent_bytes_max\fR bytes before being
issued to the device.
.sp
Default value: \fB134,217,728\fR.
.RE
.sp
.ne 2
.na
\fBzfs_trim_extent_bytes_min\fR (unsigned int)
.ad
.RS 12n
Minimum size of TRIM commands. TRIM ranges smaller than this will be skipped
unless they're part of a larger range which was broken in to chunks. This is
done because it's common for these small TRIMs to negatively impact overall
performance. This value can be set to 0 to TRIM all unallocated space.
.sp
Default value: \fB32,768\fR.
.RE
.sp
.ne 2
.na
\fBzfs_trim_metaslab_skip\fR (unsigned int)
.ad
.RS 12n
Skip uninitialized metaslabs during the TRIM process. This option is useful
for pools constructed from large thinly-provisioned devices where TRIM
operations are slow. As a pool ages an increasing fraction of the pools
metaslabs will be initialized progressively degrading the usefulness of
this option. This setting is stored when starting a manual TRIM and will
persist for the duration of the requested TRIM.
.sp
Default value: \fB0\fR.
.RE
.sp
.ne 2
.na
\fBzfs_trim_queue_limit\fR (unsigned int)
.ad
.RS 12n
Maximum number of queued TRIMs outstanding per leaf vdev. The number of
concurrent TRIM commands issued to the device is controlled by the
\fBzfs_vdev_trim_min_active\fR and \fBzfs_vdev_trim_max_active\fR module
options.
.sp
Default value: \fB10\fR.
.RE
.sp
.ne 2
.na
\fBzfs_trim_txg_batch\fR (unsigned int)
.ad
.RS 12n
The number of transaction groups worth of frees which should be aggregated
before TRIM operations are issued to the device. This setting represents a
trade-off between issuing larger, more efficient TRIM operations and the
delay before the recently trimmed space is available for use by the device.
.sp
Increasing this value will allow frees to be aggregated for a longer time.
This will result is larger TRIM operations and potentially increased memory
usage. Decreasing this value will have the opposite effect. The default
value of 32 was determined to be a reasonable compromise.
.sp
Default value: \fB32\fR.
.RE
.sp
.ne 2
.na
@ -2364,6 +2470,19 @@ Flush dirty data to disk at least every N seconds (maximum txg duration)
Default value: \fB5\fR.
.RE
.sp
.ne 2
.na
\fBzfs_vdev_aggregate_trim\fR (int)
.ad
.RS 12n
Allow TRIM I/Os to be aggregated. This is normally not helpful because
the extents to be trimmed will have been already been aggregated by the
metaslab. This option is provided for debugging and performance analysis.
.sp
Default value: \fB0\fR.
.RE
.sp
.ne 2
.na

View File

@ -174,6 +174,13 @@
.Op Fl s | Fl p
.Ar pool Ns ...
.Nm
.Cm trim
.Op Fl d
.Op Fl r Ar rate
.Op Fl c | Fl s
.Ar pool
.Op Ar device Ns ...
.Nm
.Cm set
.Ar property Ns = Ns Ar value
.Ar pool
@ -187,7 +194,7 @@
.Nm
.Cm status
.Oo Fl c Ar SCRIPT Oc
.Op Fl DigLpPsvx
.Op Fl DigLpPstvx
.Op Fl T Sy u Ns | Ns Sy d
.Oo Ar pool Oc Ns ...
.Op Ar interval Op Ar count
@ -806,6 +813,28 @@ Any write requests that have yet to be committed to disk would be blocked.
.It Sy panic
Prints out a message to the console and generates a system crash dump.
.El
.It Sy autotrim Ns = Ns Sy on Ns | Ns Sy off
When set to
.Sy on
space which has been recently freed, and is no longer allocated by the pool,
will be periodically trimmed. This allows block device vdevs which support
BLKDISCARD, such as SSDs, or file vdevs on which the underlying file system
supports hole-punching, to reclaim unused blocks. The default setting for
this property is
.Sy off .
.Pp
Automatic TRIM does not immediately reclaim blocks after a free. Instead,
it will optimistically delay allowing smaller ranges to be aggregated in to
a few larger ones. These can then be issued more efficiently to the storage.
.Pp
Be aware that automatic trimming of recently freed data blocks can put
significant stress on the underlying storage devices. This will vary
depending of how well the specific device handles these commands. For
lower end devices it is often possible to achieve most of the benefits
of automatic trimming by running an on-demand (manual) TRIM periodically
using the
.Nm zpool Cm trim
command.
.It Sy feature@ Ns Ar feature_name Ns = Ns Sy enabled
The value of this property is the current state of
.Ar feature_name .
@ -1782,15 +1811,10 @@ the path. This can be used in conjunction with the
.Fl L
flag.
.It Fl r
Print request size histograms for the leaf ZIOs. This includes
histograms of individual ZIOs (
.Ar ind )
and aggregate ZIOs (
.Ar agg ).
These stats can be useful for seeing how well the ZFS IO aggregator is
working. Do not confuse these request size stats with the block layer
requests; it's possible ZIOs can be broken up before being sent to the
block device.
Print request size histograms for the leaf vdev's IO. This includes
histograms of individual IOs (ind) and aggregate IOs (agg). These stats
can be useful for observing how well IO aggregation is working. Note
that TRIM IOs may exceed 16M, but will be counted as 16M.
.It Fl v
Verbose statistics Reports usage statistics for individual vdevs within the
pool, in addition to the pool-wide statistics.
@ -1829,6 +1853,8 @@ Average amount of time IO spent in asynchronous priority queues.
Does not include disk time.
.Ar scrub :
Average queuing time in scrub queue. Does not include disk time.
.Ar trim :
Average queuing time in trim queue. Does not include disk time.
.It Fl q
Include active queue statistics. Each priority queue has both
pending (
@ -1846,6 +1872,8 @@ queues.
Current number of entries in asynchronous priority queues.
.Ar scrubq_read :
Current number of entries in scrub queue.
.Ar trimq_write :
Current number of entries in trim queue.
.Pp
All queue statistics are instantaneous measurements of the number of
entries in the queues. If you specify an interval, the measurements
@ -2151,6 +2179,48 @@ restarted from the beginning. Any drives that were scheduled for a deferred
resilver will be added to the new one.
.It Xo
.Nm
.Cm trim
.Op Fl d
.Op Fl c | Fl s
.Ar pool
.Op Ar device Ns ...
.Xc
Initiates an immediate on-demand TRIM operation for all of the free space in
a pool. This operation informs the underlying storage devices of all blocks
in the pool which are no longer allocated and allows thinly provisioned
devices to reclaim the space.
.Pp
A manual on-demand TRIM operation can be initiated irrespective of the
.Sy autotrim
pool property setting. See the documentation for the
.Sy autotrim
property above for the types of vdev devices which can be trimmed.
.Bl -tag -width Ds
.It Fl d -secure
Causes a secure TRIM to be initiated. When performing a secure TRIM, the
device guarantees that data stored on the trimmed blocks has been erased.
This requires support from the device and is not supported by all SSDs.
.It Fl r -rate Ar rate
Controls the rate at which the TRIM operation progresses. Without this
option TRIM is executed as quickly as possible. The rate, expressed in bytes
per second, is applied on a per-vdev basis and may be set differently for
each leaf vdev.
.It Fl c, -cancel
Cancel trimming on the specified devices, or all eligible devices if none
are specified.
If one or more target devices are invalid or are not currently being
trimmed, the command will fail and no cancellation will occur on any device.
.It Fl s -suspend
Suspend trimming on the specified devices, or all eligible devices if none
are specified.
If one or more target devices are invalid or are not currently being
trimmed, the command will fail and no suspension will occur on any device.
Trimming can then be resumed by running
.Nm zpool Cm trim
with no flags on the relevant target devices.
.El
.It Xo
.Nm
.Cm set
.Ar property Ns = Ns Ar value
.Ar pool
@ -2238,7 +2308,7 @@ and automatically import it.
.Nm
.Cm status
.Op Fl c Op Ar SCRIPT1 Ns Oo , Ns Ar SCRIPT2 Oc Ns ...
.Op Fl DigLpPsvx
.Op Fl DigLpPstvx
.Op Fl T Sy u Ns | Ns Sy d
.Oo Ar pool Oc Ns ...
.Op Ar interval Op Ar count
@ -2295,6 +2365,8 @@ didn't complete in \fBzio_slow_io_ms\fR milliseconds (default 30 seconds).
This does not necessarily mean the IOs failed to complete, just took an
unreasonably long amount of time. This may indicate a problem with the
underlying storage.
.It Fl t
Display vdev TRIM status.
.It Fl T Sy u Ns | Ns Sy d
Display a time stamp.
Specify

View File

@ -130,6 +130,9 @@ zpool_prop_init(void)
zprop_register_index(ZPOOL_PROP_FAILUREMODE, "failmode",
ZIO_FAILURE_MODE_WAIT, PROP_DEFAULT, ZFS_TYPE_POOL,
"wait | continue | panic", "FAILMODE", failuremode_table);
zprop_register_index(ZPOOL_PROP_AUTOTRIM, "autotrim",
SPA_AUTOTRIM_OFF, PROP_DEFAULT, ZFS_TYPE_POOL,
"on | off", "AUTOTRIM", boolean_table);
/* hidden properties */
zprop_register_hidden(ZPOOL_PROP_NAME, "name", PROP_TYPE_STRING,

View File

@ -99,6 +99,7 @@ $(MODULE)-objs += vdev_raidz_math.o
$(MODULE)-objs += vdev_raidz_math_scalar.o
$(MODULE)-objs += vdev_removal.o
$(MODULE)-objs += vdev_root.o
$(MODULE)-objs += vdev_trim.o
$(MODULE)-objs += zap.o
$(MODULE)-objs += zap_leaf.o
$(MODULE)-objs += zap_micro.o

View File

@ -842,7 +842,7 @@ dmu_free_long_range_impl(objset_t *os, dnode_t *dn, uint64_t offset,
if (dirty_frees_threshold != 0 &&
long_free_dirty_all_txgs >= dirty_frees_threshold) {
DMU_TX_STAT_BUMP(dmu_tx_dirty_frees_delay);
txg_wait_open(dp, 0);
txg_wait_open(dp, 0, B_TRUE);
continue;
}

View File

@ -181,7 +181,6 @@ int metaslab_lba_weighting_enabled = B_TRUE;
*/
int metaslab_bias_enabled = B_TRUE;
/*
* Enable/disable remapping of indirect DVAs to their concrete vdevs.
*/
@ -219,6 +218,12 @@ boolean_t metaslab_trace_enabled = B_TRUE;
uint64_t metaslab_trace_max_entries = 5000;
#endif
/*
* Maximum number of metaslabs per group that can be disabled
* simultaneously.
*/
int max_disabled_ms = 3;
static uint64_t metaslab_weight(metaslab_t *);
static void metaslab_set_fragmentation(metaslab_t *);
static void metaslab_free_impl(vdev_t *, uint64_t, uint64_t, boolean_t);
@ -652,8 +657,8 @@ metaslab_group_create(metaslab_class_t *mc, vdev_t *vd, int allocators)
mg = kmem_zalloc(sizeof (metaslab_group_t), KM_SLEEP);
mutex_init(&mg->mg_lock, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&mg->mg_ms_initialize_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&mg->mg_ms_initialize_cv, NULL, CV_DEFAULT, NULL);
mutex_init(&mg->mg_ms_disabled_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&mg->mg_ms_disabled_cv, NULL, CV_DEFAULT, NULL);
mg->mg_primaries = kmem_zalloc(allocators * sizeof (metaslab_t *),
KM_SLEEP);
mg->mg_secondaries = kmem_zalloc(allocators * sizeof (metaslab_t *),
@ -700,8 +705,8 @@ metaslab_group_destroy(metaslab_group_t *mg)
kmem_free(mg->mg_secondaries, mg->mg_allocators *
sizeof (metaslab_t *));
mutex_destroy(&mg->mg_lock);
mutex_destroy(&mg->mg_ms_initialize_lock);
cv_destroy(&mg->mg_ms_initialize_cv);
mutex_destroy(&mg->mg_ms_disabled_lock);
cv_destroy(&mg->mg_ms_disabled_cv);
for (int i = 0; i < mg->mg_allocators; i++) {
zfs_refcount_destroy(&mg->mg_alloc_queue_depth[i]);
@ -1846,8 +1851,10 @@ metaslab_init(metaslab_group_t *mg, uint64_t id, uint64_t object, uint64_t txg,
*/
ms->ms_allocatable = range_tree_create_impl(&rt_avl_ops,
&ms->ms_allocatable_by_size, metaslab_rangesize_compare, 0);
metaslab_group_add(mg, ms);
ms->ms_trim = range_tree_create(NULL, NULL);
metaslab_group_add(mg, ms);
metaslab_set_fragmentation(ms);
/*
@ -1921,6 +1928,9 @@ metaslab_fini(metaslab_t *msp)
for (int t = 0; t < TXG_SIZE; t++)
ASSERT(!txg_list_member(&vd->vdev_ms_list, msp, t));
range_tree_vacate(msp->ms_trim, NULL, NULL);
range_tree_destroy(msp->ms_trim);
mutex_exit(&msp->ms_lock);
cv_destroy(&msp->ms_load_cv);
mutex_destroy(&msp->ms_lock);
@ -2727,6 +2737,7 @@ metaslab_sync(metaslab_t *msp, uint64_t txg)
ASSERT3P(msp->ms_freeing, !=, NULL);
ASSERT3P(msp->ms_freed, !=, NULL);
ASSERT3P(msp->ms_checkpointing, !=, NULL);
ASSERT3P(msp->ms_trim, !=, NULL);
/*
* Normally, we don't want to process a metaslab if there are no
@ -2999,6 +3010,24 @@ metaslab_sync_done(metaslab_t *msp, uint64_t txg)
*/
metaslab_load_wait(msp);
/*
* When auto-trimming is enabled, free ranges which are added to
* ms_allocatable are also be added to ms_trim. The ms_trim tree is
* periodically consumed by the vdev_autotrim_thread() which issues
* trims for all ranges and then vacates the tree. The ms_trim tree
* can be discarded at any time with the sole consequence of recent
* frees not being trimmed.
*/
if (spa_get_autotrim(spa) == SPA_AUTOTRIM_ON) {
range_tree_walk(*defer_tree, range_tree_add, msp->ms_trim);
if (!defer_allowed) {
range_tree_walk(msp->ms_freed, range_tree_add,
msp->ms_trim);
}
} else {
range_tree_vacate(msp->ms_trim, NULL, NULL);
}
/*
* Move the frees from the defer_tree back to the free
* range tree (if it's loaded). Swap the freed_tree and
@ -3047,7 +3076,7 @@ metaslab_sync_done(metaslab_t *msp, uint64_t txg)
* from it in 'metaslab_unload_delay' txgs, then unload it.
*/
if (msp->ms_loaded &&
msp->ms_initializing == 0 &&
msp->ms_disabled == 0 &&
msp->ms_selected_txg + metaslab_unload_delay < txg) {
for (int t = 1; t < TXG_CONCURRENT_STATES; t++) {
@ -3330,7 +3359,7 @@ metaslab_block_alloc(metaslab_t *msp, uint64_t size, uint64_t txg)
metaslab_class_t *mc = msp->ms_group->mg_class;
VERIFY(!msp->ms_condensing);
VERIFY0(msp->ms_initializing);
VERIFY0(msp->ms_disabled);
start = mc->mc_ops->msop_alloc(msp, size);
if (start != -1ULL) {
@ -3341,6 +3370,7 @@ metaslab_block_alloc(metaslab_t *msp, uint64_t size, uint64_t txg)
VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
VERIFY3U(range_tree_space(rt) - size, <=, msp->ms_size);
range_tree_remove(rt, start, size);
range_tree_clear(msp->ms_trim, start, size);
if (range_tree_is_empty(msp->ms_allocating[txg & TXG_MASK]))
vdev_dirty(mg->mg_vd, VDD_METASLAB, msp, txg);
@ -3391,10 +3421,10 @@ find_valid_metaslab(metaslab_group_t *mg, uint64_t activation_weight,
}
/*
* If the selected metaslab is condensing or being
* initialized, skip it.
* If the selected metaslab is condensing or disabled,
* skip it.
*/
if (msp->ms_condensing || msp->ms_initializing > 0)
if (msp->ms_condensing || msp->ms_disabled > 0)
continue;
*was_active = msp->ms_allocator != -1;
@ -3566,9 +3596,9 @@ metaslab_group_alloc_normal(metaslab_group_t *mg, zio_alloc_list_t *zal,
~METASLAB_ACTIVE_MASK);
mutex_exit(&msp->ms_lock);
continue;
} else if (msp->ms_initializing > 0) {
} else if (msp->ms_disabled > 0) {
metaslab_trace_add(zal, mg, msp, asize, d,
TRACE_INITIALIZING, allocator);
TRACE_DISABLED, allocator);
metaslab_passivate(msp, msp->ms_weight &
~METASLAB_ACTIVE_MASK);
mutex_exit(&msp->ms_lock);
@ -4294,6 +4324,7 @@ metaslab_claim_concrete(vdev_t *vd, uint64_t offset, uint64_t size,
VERIFY3U(range_tree_space(msp->ms_allocatable) - size, <=,
msp->ms_size);
range_tree_remove(msp->ms_allocatable, offset, size);
range_tree_clear(msp->ms_trim, offset, size);
if (spa_writeable(spa)) { /* don't dirty if we're zdb(1M) */
if (range_tree_is_empty(msp->ms_allocating[txg & TXG_MASK]))
@ -4606,6 +4637,7 @@ metaslab_check_free_impl(vdev_t *vd, uint64_t offset, uint64_t size)
offset, size);
}
range_tree_verify_not_present(msp->ms_trim, offset, size);
range_tree_verify_not_present(msp->ms_freeing, offset, size);
range_tree_verify_not_present(msp->ms_checkpointing, offset, size);
range_tree_verify_not_present(msp->ms_freed, offset, size);
@ -4637,6 +4669,89 @@ metaslab_check_free(spa_t *spa, const blkptr_t *bp)
spa_config_exit(spa, SCL_VDEV, FTAG);
}
static void
metaslab_group_disable_wait(metaslab_group_t *mg)
{
ASSERT(MUTEX_HELD(&mg->mg_ms_disabled_lock));
while (mg->mg_disabled_updating) {
cv_wait(&mg->mg_ms_disabled_cv, &mg->mg_ms_disabled_lock);
}
}
static void
metaslab_group_disabled_increment(metaslab_group_t *mg)
{
ASSERT(MUTEX_HELD(&mg->mg_ms_disabled_lock));
ASSERT(mg->mg_disabled_updating);
while (mg->mg_ms_disabled >= max_disabled_ms) {
cv_wait(&mg->mg_ms_disabled_cv, &mg->mg_ms_disabled_lock);
}
mg->mg_ms_disabled++;
ASSERT3U(mg->mg_ms_disabled, <=, max_disabled_ms);
}
/*
* Mark the metaslab as disabled to prevent any allocations on this metaslab.
* We must also track how many metaslabs are currently disabled within a
* metaslab group and limit them to prevent allocation failures from
* occurring because all metaslabs are disabled.
*/
void
metaslab_disable(metaslab_t *msp)
{
ASSERT(!MUTEX_HELD(&msp->ms_lock));
metaslab_group_t *mg = msp->ms_group;
mutex_enter(&mg->mg_ms_disabled_lock);
/*
* To keep an accurate count of how many threads have disabled
* a specific metaslab group, we only allow one thread to mark
* the metaslab group at a time. This ensures that the value of
* ms_disabled will be accurate when we decide to mark a metaslab
* group as disabled. To do this we force all other threads
* to wait till the metaslab's mg_disabled_updating flag is no
* longer set.
*/
metaslab_group_disable_wait(mg);
mg->mg_disabled_updating = B_TRUE;
if (msp->ms_disabled == 0) {
metaslab_group_disabled_increment(mg);
}
mutex_enter(&msp->ms_lock);
msp->ms_disabled++;
mutex_exit(&msp->ms_lock);
mg->mg_disabled_updating = B_FALSE;
cv_broadcast(&mg->mg_ms_disabled_cv);
mutex_exit(&mg->mg_ms_disabled_lock);
}
void
metaslab_enable(metaslab_t *msp, boolean_t sync)
{
metaslab_group_t *mg = msp->ms_group;
spa_t *spa = mg->mg_vd->vdev_spa;
/*
* Wait for the outstanding IO to be synced to prevent newly
* allocated blocks from being overwritten. This used by
* initialize and TRIM which are modifying unallocated space.
*/
if (sync)
txg_wait_synced(spa_get_dsl(spa), 0);
mutex_enter(&mg->mg_ms_disabled_lock);
mutex_enter(&msp->ms_lock);
if (--msp->ms_disabled == 0) {
mg->mg_ms_disabled--;
cv_broadcast(&mg->mg_ms_disabled_cv);
}
mutex_exit(&msp->ms_lock);
mutex_exit(&mg->mg_ms_disabled_lock);
}
#if defined(_KERNEL)
/* BEGIN CSTYLED */
module_param(metaslab_aliquot, ulong, 0644);

View File

@ -57,6 +57,7 @@
#include <sys/vdev_indirect_mapping.h>
#include <sys/vdev_indirect_births.h>
#include <sys/vdev_initialize.h>
#include <sys/vdev_trim.h>
#include <sys/vdev_disk.h>
#include <sys/metaslab.h>
#include <sys/metaslab_impl.h>
@ -132,7 +133,7 @@ static const char *const zio_taskq_types[ZIO_TASKQ_TYPES] = {
* number of threads assigned to their taskqs using the ZTI_N(#) or ZTI_ONE
* macros. Other operations process a large amount of data; the ZTI_BATCH
* macro causes us to create a taskq oriented for throughput. Some operations
* are so high frequency and short-lived that the taskq itself can become a a
* are so high frequency and short-lived that the taskq itself can become a
* point of lock contention. The ZTI_P(#, #) macro indicates that we need an
* additional degree of parallelism specified by the number of threads per-
* taskq and the number of taskqs; when dispatching an event in this case, the
@ -150,6 +151,7 @@ const zio_taskq_info_t zio_taskqs[ZIO_TYPES][ZIO_TASKQ_TYPES] = {
{ ZTI_P(12, 8), ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* FREE */
{ ZTI_ONE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* CLAIM */
{ ZTI_ONE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* IOCTL */
{ ZTI_N(4), ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* TRIM */
};
static void spa_sync_version(void *arg, dmu_tx_t *tx);
@ -554,6 +556,7 @@ spa_prop_validate(spa_t *spa, nvlist_t *props)
case ZPOOL_PROP_AUTOREPLACE:
case ZPOOL_PROP_LISTSNAPS:
case ZPOOL_PROP_AUTOEXPAND:
case ZPOOL_PROP_AUTOTRIM:
error = nvpair_value_uint64(elem, &intval);
if (!error && intval > 1)
error = SET_ERROR(EINVAL);
@ -1442,8 +1445,10 @@ spa_unload(spa_t *spa)
spa_async_suspend(spa);
if (spa->spa_root_vdev) {
vdev_initialize_stop_all(spa->spa_root_vdev,
VDEV_INITIALIZE_ACTIVE);
vdev_t *root_vdev = spa->spa_root_vdev;
vdev_initialize_stop_all(root_vdev, VDEV_INITIALIZE_ACTIVE);
vdev_trim_stop_all(root_vdev, VDEV_TRIM_ACTIVE);
vdev_autotrim_stop_all(spa);
}
/*
@ -3585,7 +3590,7 @@ spa_ld_get_props(spa_t *spa)
spa_prop_find(spa, ZPOOL_PROP_MULTIHOST, &spa->spa_multihost);
spa_prop_find(spa, ZPOOL_PROP_DEDUPDITTO,
&spa->spa_dedup_ditto);
spa_prop_find(spa, ZPOOL_PROP_AUTOTRIM, &spa->spa_autotrim);
spa->spa_autoreplace = (autoreplace != 0);
}
@ -4336,6 +4341,8 @@ spa_load_impl(spa_t *spa, spa_import_type_t type, char **ereport)
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
vdev_initialize_restart(spa->spa_root_vdev);
vdev_trim_restart(spa->spa_root_vdev);
vdev_autotrim_restart(spa);
spa_config_exit(spa, SCL_CONFIG, FTAG);
}
@ -5338,6 +5345,7 @@ spa_create(const char *pool, nvlist_t *nvroot, nvlist_t *props,
spa->spa_failmode = zpool_prop_default_numeric(ZPOOL_PROP_FAILUREMODE);
spa->spa_autoexpand = zpool_prop_default_numeric(ZPOOL_PROP_AUTOEXPAND);
spa->spa_multihost = zpool_prop_default_numeric(ZPOOL_PROP_MULTIHOST);
spa->spa_autotrim = zpool_prop_default_numeric(ZPOOL_PROP_AUTOTRIM);
if (props != NULL) {
spa_configfile_set(spa, props, B_FALSE);
@ -5746,14 +5754,16 @@ spa_export_common(char *pool, int new_state, nvlist_t **oldconfig,
/*
* We're about to export or destroy this pool. Make sure
* we stop all initializtion activity here before we
* set the spa_final_txg. This will ensure that all
* we stop all initialization and trim activity here before
* we set the spa_final_txg. This will ensure that all
* dirty data resulting from the initialization is
* committed to disk before we unload the pool.
*/
if (spa->spa_root_vdev != NULL) {
vdev_initialize_stop_all(spa->spa_root_vdev,
VDEV_INITIALIZE_ACTIVE);
vdev_t *rvd = spa->spa_root_vdev;
vdev_initialize_stop_all(rvd, VDEV_INITIALIZE_ACTIVE);
vdev_trim_stop_all(rvd, VDEV_TRIM_ACTIVE);
vdev_autotrim_stop_all(spa);
}
/*
@ -6376,7 +6386,6 @@ spa_vdev_detach(spa_t *spa, uint64_t guid, uint64_t pguid, int replace_done)
vdev_remove_parent(cvd);
}
/*
* We don't set tvd until now because the parent we just removed
* may have been the previous top-level vdev.
@ -6490,7 +6499,7 @@ spa_vdev_initialize_impl(spa_t *spa, uint64_t guid, uint64_t cmd_type,
* a previous initialization process which has completed but
* the thread is not exited.
*/
if (cmd_type == POOL_INITIALIZE_DO &&
if (cmd_type == POOL_INITIALIZE_START &&
(vd->vdev_initialize_thread != NULL ||
vd->vdev_top->vdev_removing)) {
mutex_exit(&vd->vdev_initialize_lock);
@ -6507,7 +6516,7 @@ spa_vdev_initialize_impl(spa_t *spa, uint64_t guid, uint64_t cmd_type,
}
switch (cmd_type) {
case POOL_INITIALIZE_DO:
case POOL_INITIALIZE_START:
vdev_initialize(vd);
break;
case POOL_INITIALIZE_CANCEL:
@ -6571,6 +6580,126 @@ spa_vdev_initialize(spa_t *spa, nvlist_t *nv, uint64_t cmd_type,
return (total_errors);
}
static int
spa_vdev_trim_impl(spa_t *spa, uint64_t guid, uint64_t cmd_type,
uint64_t rate, boolean_t partial, boolean_t secure, list_t *vd_list)
{
ASSERT(MUTEX_HELD(&spa_namespace_lock));
spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_READER);
/* Look up vdev and ensure it's a leaf. */
vdev_t *vd = spa_lookup_by_guid(spa, guid, B_FALSE);
if (vd == NULL || vd->vdev_detached) {
spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
return (SET_ERROR(ENODEV));
} else if (!vd->vdev_ops->vdev_op_leaf || !vdev_is_concrete(vd)) {
spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
return (SET_ERROR(EINVAL));
} else if (!vdev_writeable(vd)) {
spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
return (SET_ERROR(EROFS));
} else if (!vd->vdev_has_trim) {
spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
return (SET_ERROR(EOPNOTSUPP));
} else if (secure && !vd->vdev_has_securetrim) {
spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
return (SET_ERROR(EOPNOTSUPP));
}
mutex_enter(&vd->vdev_trim_lock);
spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
/*
* When we activate a TRIM action we check to see if the
* vdev_trim_thread is NULL. We do this instead of using the
* vdev_trim_state since there might be a previous TRIM process
* which has completed but the thread is not exited.
*/
if (cmd_type == POOL_TRIM_START &&
(vd->vdev_trim_thread != NULL || vd->vdev_top->vdev_removing)) {
mutex_exit(&vd->vdev_trim_lock);
return (SET_ERROR(EBUSY));
} else if (cmd_type == POOL_TRIM_CANCEL &&
(vd->vdev_trim_state != VDEV_TRIM_ACTIVE &&
vd->vdev_trim_state != VDEV_TRIM_SUSPENDED)) {
mutex_exit(&vd->vdev_trim_lock);
return (SET_ERROR(ESRCH));
} else if (cmd_type == POOL_TRIM_SUSPEND &&
vd->vdev_trim_state != VDEV_TRIM_ACTIVE) {
mutex_exit(&vd->vdev_trim_lock);
return (SET_ERROR(ESRCH));
}
switch (cmd_type) {
case POOL_TRIM_START:
vdev_trim(vd, rate, partial, secure);
break;
case POOL_TRIM_CANCEL:
vdev_trim_stop(vd, VDEV_TRIM_CANCELED, vd_list);
break;
case POOL_TRIM_SUSPEND:
vdev_trim_stop(vd, VDEV_TRIM_SUSPENDED, vd_list);
break;
default:
panic("invalid cmd_type %llu", (unsigned long long)cmd_type);
}
mutex_exit(&vd->vdev_trim_lock);
return (0);
}
/*
* Initiates a manual TRIM for the requested vdevs. This kicks off individual
* TRIM threads for each child vdev. These threads pass over all of the free
* space in the vdev's metaslabs and issues TRIM commands for that space.
*/
int
spa_vdev_trim(spa_t *spa, nvlist_t *nv, uint64_t cmd_type, uint64_t rate,
boolean_t partial, boolean_t secure, nvlist_t *vdev_errlist)
{
int total_errors = 0;
list_t vd_list;
list_create(&vd_list, sizeof (vdev_t),
offsetof(vdev_t, vdev_trim_node));
/*
* We hold the namespace lock through the whole function
* to prevent any changes to the pool while we're starting or
* stopping TRIM. The config and state locks are held so that
* we can properly assess the vdev state before we commit to
* the TRIM operation.
*/
mutex_enter(&spa_namespace_lock);
for (nvpair_t *pair = nvlist_next_nvpair(nv, NULL);
pair != NULL; pair = nvlist_next_nvpair(nv, pair)) {
uint64_t vdev_guid = fnvpair_value_uint64(pair);
int error = spa_vdev_trim_impl(spa, vdev_guid, cmd_type,
rate, partial, secure, &vd_list);
if (error != 0) {
char guid_as_str[MAXNAMELEN];
(void) snprintf(guid_as_str, sizeof (guid_as_str),
"%llu", (unsigned long long)vdev_guid);
fnvlist_add_int64(vdev_errlist, guid_as_str, error);
total_errors++;
}
}
/* Wait for all TRIM threads to stop. */
vdev_trim_stop_wait(spa, &vd_list);
/* Sync out the TRIM state */
txg_wait_synced(spa->spa_dsl_pool, 0);
mutex_exit(&spa_namespace_lock);
list_destroy(&vd_list);
return (total_errors);
}
/*
* Split a set of devices from their mirrors, and create a new pool from them.
*/
@ -6780,24 +6909,36 @@ spa_vdev_split_mirror(spa_t *spa, char *newname, nvlist_t *config,
spa_async_suspend(newspa);
/*
* Temporarily stop the initializing activity. We set the state to
* ACTIVE so that we know to resume the initializing once the split
* has completed.
* Temporarily stop the initializing and TRIM activity. We set the
* state to ACTIVE so that we know to resume initializing or TRIM
* once the split has completed.
*/
list_t vd_list;
list_create(&vd_list, sizeof (vdev_t),
list_t vd_initialize_list;
list_create(&vd_initialize_list, sizeof (vdev_t),
offsetof(vdev_t, vdev_initialize_node));
list_t vd_trim_list;
list_create(&vd_trim_list, sizeof (vdev_t),
offsetof(vdev_t, vdev_trim_node));
for (c = 0; c < children; c++) {
if (vml[c] != NULL) {
mutex_enter(&vml[c]->vdev_initialize_lock);
vdev_initialize_stop(vml[c], VDEV_INITIALIZE_ACTIVE,
&vd_list);
vdev_initialize_stop(vml[c],
VDEV_INITIALIZE_ACTIVE, &vd_initialize_list);
mutex_exit(&vml[c]->vdev_initialize_lock);
mutex_enter(&vml[c]->vdev_trim_lock);
vdev_trim_stop(vml[c], VDEV_TRIM_ACTIVE, &vd_trim_list);
mutex_exit(&vml[c]->vdev_trim_lock);
}
}
vdev_initialize_stop_wait(spa, &vd_list);
list_destroy(&vd_list);
vdev_initialize_stop_wait(spa, &vd_initialize_list);
vdev_trim_stop_wait(spa, &vd_trim_list);
list_destroy(&vd_initialize_list);
list_destroy(&vd_trim_list);
newspa->spa_config_source = SPA_CONFIG_SRC_SPLIT;
@ -6899,8 +7040,10 @@ out:
vml[c]->vdev_offline = B_FALSE;
}
/* restart initializing disks as necessary */
/* restart initializing or trimming disks as necessary */
spa_async_request(spa, SPA_ASYNC_INITIALIZE_RESTART);
spa_async_request(spa, SPA_ASYNC_TRIM_RESTART);
spa_async_request(spa, SPA_ASYNC_AUTOTRIM_RESTART);
vdev_reopen(spa->spa_root_vdev);
@ -7283,6 +7426,22 @@ spa_async_thread(void *arg)
mutex_exit(&spa_namespace_lock);
}
if (tasks & SPA_ASYNC_TRIM_RESTART) {
mutex_enter(&spa_namespace_lock);
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
vdev_trim_restart(spa->spa_root_vdev);
spa_config_exit(spa, SCL_CONFIG, FTAG);
mutex_exit(&spa_namespace_lock);
}
if (tasks & SPA_ASYNC_AUTOTRIM_RESTART) {
mutex_enter(&spa_namespace_lock);
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
vdev_autotrim_restart(spa);
spa_config_exit(spa, SCL_CONFIG, FTAG);
mutex_exit(&spa_namespace_lock);
}
/*
* Let the world know that we're done.
*/
@ -7782,6 +7941,11 @@ spa_sync_props(void *arg, dmu_tx_t *tx)
case ZPOOL_PROP_FAILUREMODE:
spa->spa_failmode = intval;
break;
case ZPOOL_PROP_AUTOTRIM:
spa->spa_autotrim = intval;
spa_async_request(spa,
SPA_ASYNC_AUTOTRIM_RESTART);
break;
case ZPOOL_PROP_AUTOEXPAND:
spa->spa_autoexpand = intval;
if (tx->tx_txg != TXG_INITIAL)

View File

@ -39,6 +39,7 @@
#include <sys/zil.h>
#include <sys/vdev_impl.h>
#include <sys/vdev_initialize.h>
#include <sys/vdev_trim.h>
#include <sys/vdev_file.h>
#include <sys/vdev_raidz.h>
#include <sys/metaslab.h>
@ -1128,6 +1129,9 @@ spa_vdev_enter(spa_t *spa)
{
mutex_enter(&spa->spa_vdev_top_lock);
mutex_enter(&spa_namespace_lock);
vdev_autotrim_stop_all(spa);
return (spa_vdev_config_enter(spa));
}
@ -1204,8 +1208,17 @@ spa_vdev_config_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error, char *tag)
vdev_initialize_stop(vd, VDEV_INITIALIZE_CANCELED,
NULL);
mutex_exit(&vd->vdev_initialize_lock);
mutex_enter(&vd->vdev_trim_lock);
vdev_trim_stop(vd, VDEV_TRIM_CANCELED, NULL);
mutex_exit(&vd->vdev_trim_lock);
}
/*
* The vdev may be both a leaf and top-level device.
*/
vdev_autotrim_stop_wait(vd);
spa_config_enter(spa, SCL_ALL, spa, RW_WRITER);
vdev_free(vd);
spa_config_exit(spa, SCL_ALL, spa);
@ -1227,6 +1240,8 @@ spa_vdev_config_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error, char *tag)
int
spa_vdev_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error)
{
vdev_autotrim_restart(spa);
spa_vdev_config_exit(spa, vd, txg, error, FTAG);
mutex_exit(&spa_namespace_lock);
mutex_exit(&spa->spa_vdev_top_lock);
@ -1923,6 +1938,12 @@ spa_deadman_synctime(spa_t *spa)
return (spa->spa_deadman_synctime);
}
spa_autotrim_t
spa_get_autotrim(spa_t *spa)
{
return (spa->spa_autotrim);
}
uint64_t
spa_deadman_ziotime(spa_t *spa)
{

View File

@ -887,6 +887,105 @@ spa_health_destroy(spa_t *spa)
mutex_destroy(&shk->lock);
}
static spa_iostats_t spa_iostats_template = {
{ "trim_extents_written", KSTAT_DATA_UINT64 },
{ "trim_bytes_written", KSTAT_DATA_UINT64 },
{ "trim_extents_skipped", KSTAT_DATA_UINT64 },
{ "trim_bytes_skipped", KSTAT_DATA_UINT64 },
{ "trim_extents_failed", KSTAT_DATA_UINT64 },
{ "trim_bytes_failed", KSTAT_DATA_UINT64 },
{ "autotrim_extents_written", KSTAT_DATA_UINT64 },
{ "autotrim_bytes_written", KSTAT_DATA_UINT64 },
{ "autotrim_extents_skipped", KSTAT_DATA_UINT64 },
{ "autotrim_bytes_skipped", KSTAT_DATA_UINT64 },
{ "autotrim_extents_failed", KSTAT_DATA_UINT64 },
{ "autotrim_bytes_failed", KSTAT_DATA_UINT64 },
};
#define SPA_IOSTATS_ADD(stat, val) \
atomic_add_64(&iostats->stat.value.ui64, (val));
void
spa_iostats_trim_add(spa_t *spa, trim_type_t type,
uint64_t extents_written, uint64_t bytes_written,
uint64_t extents_skipped, uint64_t bytes_skipped,
uint64_t extents_failed, uint64_t bytes_failed)
{
spa_history_kstat_t *shk = &spa->spa_stats.iostats;
kstat_t *ksp = shk->kstat;
spa_iostats_t *iostats;
if (ksp == NULL)
return;
iostats = ksp->ks_data;
if (type == TRIM_TYPE_MANUAL) {
SPA_IOSTATS_ADD(trim_extents_written, extents_written);
SPA_IOSTATS_ADD(trim_bytes_written, bytes_written);
SPA_IOSTATS_ADD(trim_extents_skipped, extents_skipped);
SPA_IOSTATS_ADD(trim_bytes_skipped, bytes_skipped);
SPA_IOSTATS_ADD(trim_extents_failed, extents_failed);
SPA_IOSTATS_ADD(trim_bytes_failed, bytes_failed);
} else {
SPA_IOSTATS_ADD(autotrim_extents_written, extents_written);
SPA_IOSTATS_ADD(autotrim_bytes_written, bytes_written);
SPA_IOSTATS_ADD(autotrim_extents_skipped, extents_skipped);
SPA_IOSTATS_ADD(autotrim_bytes_skipped, bytes_skipped);
SPA_IOSTATS_ADD(autotrim_extents_failed, extents_failed);
SPA_IOSTATS_ADD(autotrim_bytes_failed, bytes_failed);
}
}
int
spa_iostats_update(kstat_t *ksp, int rw)
{
if (rw == KSTAT_WRITE) {
memcpy(ksp->ks_data, &spa_iostats_template,
sizeof (spa_iostats_t));
}
return (0);
}
static void
spa_iostats_init(spa_t *spa)
{
spa_history_kstat_t *shk = &spa->spa_stats.iostats;
mutex_init(&shk->lock, NULL, MUTEX_DEFAULT, NULL);
char *name = kmem_asprintf("zfs/%s", spa_name(spa));
kstat_t *ksp = kstat_create(name, 0, "iostats", "misc",
KSTAT_TYPE_NAMED, sizeof (spa_iostats_t) / sizeof (kstat_named_t),
KSTAT_FLAG_VIRTUAL);
shk->kstat = ksp;
if (ksp) {
int size = sizeof (spa_iostats_t);
ksp->ks_lock = &shk->lock;
ksp->ks_private = spa;
ksp->ks_update = spa_iostats_update;
ksp->ks_data = kmem_alloc(size, KM_SLEEP);
memcpy(ksp->ks_data, &spa_iostats_template, size);
kstat_install(ksp);
}
strfree(name);
}
static void
spa_iostats_destroy(spa_t *spa)
{
spa_history_kstat_t *shk = &spa->spa_stats.iostats;
kstat_t *ksp = shk->kstat;
if (ksp) {
kmem_free(ksp->ks_data, sizeof (spa_iostats_t));
kstat_delete(ksp);
}
mutex_destroy(&shk->lock);
}
void
spa_stats_init(spa_t *spa)
{
@ -896,11 +995,13 @@ spa_stats_init(spa_t *spa)
spa_io_history_init(spa);
spa_mmp_history_init(spa);
spa_state_init(spa);
spa_iostats_init(spa);
}
void
spa_stats_destroy(spa_t *spa)
{
spa_iostats_destroy(spa);
spa_health_destroy(spa);
spa_tx_assign_destroy(spa);
spa_txg_history_destroy(spa);

View File

@ -694,8 +694,12 @@ txg_wait_synced(dsl_pool_t *dp, uint64_t txg)
mutex_exit(&tx->tx_sync_lock);
}
/*
* Wait for the specified open transaction group. Set should_quiesce
* when the current open txg should be quiesced immediately.
*/
void
txg_wait_open(dsl_pool_t *dp, uint64_t txg)
txg_wait_open(dsl_pool_t *dp, uint64_t txg, boolean_t should_quiesce)
{
tx_state_t *tx = &dp->dp_tx;
@ -705,7 +709,7 @@ txg_wait_open(dsl_pool_t *dp, uint64_t txg)
ASSERT3U(tx->tx_threads, ==, 2);
if (txg == 0)
txg = tx->tx_open_txg + 1;
if (tx->tx_quiesce_txg_waiting < txg)
if (tx->tx_quiesce_txg_waiting < txg && should_quiesce)
tx->tx_quiesce_txg_waiting = txg;
dprintf("txg=%llu quiesce_txg=%llu sync_txg=%llu\n",
txg, tx->tx_quiesce_txg_waiting, tx->tx_sync_txg_waiting);

View File

@ -51,6 +51,7 @@
#include <sys/dsl_scan.h>
#include <sys/abd.h>
#include <sys/vdev_initialize.h>
#include <sys/vdev_trim.h>
#include <sys/zvol.h>
#include <sys/zfs_ratelimit.h>
@ -543,6 +544,7 @@ vdev_alloc_common(spa_t *spa, uint_t id, uint64_t guid, vdev_ops_t *ops)
list_link_init(&vd->vdev_state_dirty_node);
list_link_init(&vd->vdev_initialize_node);
list_link_init(&vd->vdev_leaf_node);
list_link_init(&vd->vdev_trim_node);
mutex_init(&vd->vdev_dtl_lock, NULL, MUTEX_NOLOCKDEP, NULL);
mutex_init(&vd->vdev_stat_lock, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&vd->vdev_probe_lock, NULL, MUTEX_DEFAULT, NULL);
@ -551,6 +553,12 @@ vdev_alloc_common(spa_t *spa, uint_t id, uint64_t guid, vdev_ops_t *ops)
mutex_init(&vd->vdev_initialize_io_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&vd->vdev_initialize_cv, NULL, CV_DEFAULT, NULL);
cv_init(&vd->vdev_initialize_io_cv, NULL, CV_DEFAULT, NULL);
mutex_init(&vd->vdev_trim_lock, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&vd->vdev_autotrim_lock, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&vd->vdev_trim_io_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&vd->vdev_trim_cv, NULL, CV_DEFAULT, NULL);
cv_init(&vd->vdev_autotrim_cv, NULL, CV_DEFAULT, NULL);
cv_init(&vd->vdev_trim_io_cv, NULL, CV_DEFAULT, NULL);
for (int t = 0; t < DTL_TYPES; t++) {
vd->vdev_dtl[t] = range_tree_create(NULL, NULL);
@ -875,7 +883,10 @@ void
vdev_free(vdev_t *vd)
{
spa_t *spa = vd->vdev_spa;
ASSERT3P(vd->vdev_initialize_thread, ==, NULL);
ASSERT3P(vd->vdev_trim_thread, ==, NULL);
ASSERT3P(vd->vdev_autotrim_thread, ==, NULL);
/*
* Scan queues are normally destroyed at the end of a scan. If the
@ -906,7 +917,6 @@ vdev_free(vdev_t *vd)
ASSERT(vd->vdev_child == NULL);
ASSERT(vd->vdev_guid_sum == vd->vdev_guid);
ASSERT(vd->vdev_initialize_thread == NULL);
/*
* Discard allocation state.
@ -988,6 +998,12 @@ vdev_free(vdev_t *vd)
mutex_destroy(&vd->vdev_initialize_io_lock);
cv_destroy(&vd->vdev_initialize_io_cv);
cv_destroy(&vd->vdev_initialize_cv);
mutex_destroy(&vd->vdev_trim_lock);
mutex_destroy(&vd->vdev_autotrim_lock);
mutex_destroy(&vd->vdev_trim_io_lock);
cv_destroy(&vd->vdev_trim_cv);
cv_destroy(&vd->vdev_autotrim_cv);
cv_destroy(&vd->vdev_trim_io_cv);
zfs_ratelimit_fini(&vd->vdev_delay_rl);
zfs_ratelimit_fini(&vd->vdev_checksum_rl);
@ -3475,6 +3491,16 @@ vdev_online(spa_t *spa, uint64_t guid, uint64_t flags, vdev_state_t *newstate)
}
mutex_exit(&vd->vdev_initialize_lock);
/* Restart trimming if necessary */
mutex_enter(&vd->vdev_trim_lock);
if (vdev_writeable(vd) &&
vd->vdev_trim_thread == NULL &&
vd->vdev_trim_state == VDEV_TRIM_ACTIVE) {
(void) vdev_trim(vd, vd->vdev_trim_rate, vd->vdev_trim_partial,
vd->vdev_trim_secure);
}
mutex_exit(&vd->vdev_trim_lock);
if (wasoffline ||
(oldstate < VDEV_STATE_DEGRADED &&
vd->vdev_state >= VDEV_STATE_DEGRADED))
@ -3745,8 +3771,7 @@ vdev_accessible(vdev_t *vd, zio_t *zio)
static void
vdev_get_child_stat(vdev_t *cvd, vdev_stat_t *vs, vdev_stat_t *cvs)
{
int t;
for (t = 0; t < ZIO_TYPES; t++) {
for (int t = 0; t < VS_ZIO_TYPES; t++) {
vs->vs_ops[t] += cvs->vs_ops[t];
vs->vs_bytes[t] += cvs->vs_bytes[t];
}
@ -3873,7 +3898,7 @@ vdev_get_stats_ex(vdev_t *vd, vdev_stat_t *vs, vdev_stat_ex_t *vsx)
vs->vs_rsize += VDEV_LABEL_START_SIZE +
VDEV_LABEL_END_SIZE;
/*
* Report intializing progress. Since we don't
* Report initializing progress. Since we don't
* have the initializing locks held, this is only
* an estimate (although a fairly accurate one).
*/
@ -3884,9 +3909,20 @@ vdev_get_stats_ex(vdev_t *vd, vdev_stat_t *vs, vdev_stat_ex_t *vsx)
vs->vs_initialize_state = vd->vdev_initialize_state;
vs->vs_initialize_action_time =
vd->vdev_initialize_action_time;
/*
* Report manual TRIM progress. Since we don't have
* the manual TRIM locks held, this is only an
* estimate (although fairly accurate one).
*/
vs->vs_trim_notsup = !vd->vdev_has_trim;
vs->vs_trim_bytes_done = vd->vdev_trim_bytes_done;
vs->vs_trim_bytes_est = vd->vdev_trim_bytes_est;
vs->vs_trim_state = vd->vdev_trim_state;
vs->vs_trim_action_time = vd->vdev_trim_action_time;
}
/*
* Report expandable space on top-level, non-auxillary devices
* Report expandable space on top-level, non-auxiliary devices
* only. The expandable space is reported in terms of metaslab
* sized units since that determines how much space the pool
* can expand.
@ -4004,9 +4040,18 @@ vdev_stat_update(zio_t *zio, uint64_t psize)
*/
if (vd->vdev_ops->vdev_op_leaf &&
(zio->io_priority < ZIO_PRIORITY_NUM_QUEUEABLE)) {
zio_type_t vs_type = type;
vs->vs_ops[type]++;
vs->vs_bytes[type] += psize;
/*
* TRIM ops and bytes are reported to user space as
* ZIO_TYPE_IOCTL. This is done to preserve the
* vdev_stat_t structure layout for user space.
*/
if (type == ZIO_TYPE_TRIM)
vs_type = ZIO_TYPE_IOCTL;
vs->vs_ops[vs_type]++;
vs->vs_bytes[vs_type] += psize;
if (flags & ZIO_FLAG_DELEGATED) {
vsx->vsx_agg_histo[zio->io_priority]
@ -4104,7 +4149,8 @@ vdev_deflated_space(vdev_t *vd, int64_t space)
}
/*
* Update the in-core space usage stats for this vdev and the root vdev.
* Update the in-core space usage stats for this vdev, its metaslab class,
* and the root vdev.
*/
void
vdev_space_update(vdev_t *vd, int64_t alloc_delta, int64_t defer_delta,
@ -4650,12 +4696,56 @@ vdev_set_deferred_resilver(spa_t *spa, vdev_t *vd)
spa->spa_resilver_deferred = B_TRUE;
}
/*
* Translate a logical range to the physical range for the specified vdev_t.
* This function is initially called with a leaf vdev and will walk each
* parent vdev until it reaches a top-level vdev. Once the top-level is
* reached the physical range is initialized and the recursive function
* begins to unwind. As it unwinds it calls the parent's vdev specific
* translation function to do the real conversion.
*/
void
vdev_xlate(vdev_t *vd, const range_seg_t *logical_rs, range_seg_t *physical_rs)
{
/*
* Walk up the vdev tree
*/
if (vd != vd->vdev_top) {
vdev_xlate(vd->vdev_parent, logical_rs, physical_rs);
} else {
/*
* We've reached the top-level vdev, initialize the
* physical range to the logical range and start to
* unwind.
*/
physical_rs->rs_start = logical_rs->rs_start;
physical_rs->rs_end = logical_rs->rs_end;
return;
}
vdev_t *pvd = vd->vdev_parent;
ASSERT3P(pvd, !=, NULL);
ASSERT3P(pvd->vdev_ops->vdev_op_xlate, !=, NULL);
/*
* As this recursive function unwinds, translate the logical
* range into its physical components by calling the
* vdev specific translate function.
*/
range_seg_t intermediate = { { { 0, 0 } } };
pvd->vdev_ops->vdev_op_xlate(vd, physical_rs, &intermediate);
physical_rs->rs_start = intermediate.rs_start;
physical_rs->rs_end = intermediate.rs_end;
}
#if defined(_KERNEL)
EXPORT_SYMBOL(vdev_fault);
EXPORT_SYMBOL(vdev_degrade);
EXPORT_SYMBOL(vdev_online);
EXPORT_SYMBOL(vdev_offline);
EXPORT_SYMBOL(vdev_clear);
/* BEGIN CSTYLED */
module_param(zfs_vdev_default_ms_count, int, 0644);
MODULE_PARM_DESC(zfs_vdev_default_ms_count,

View File

@ -30,6 +30,7 @@
#include <sys/spa_impl.h>
#include <sys/vdev_disk.h>
#include <sys/vdev_impl.h>
#include <sys/vdev_trim.h>
#include <sys/abd.h>
#include <sys/fs/zfs.h>
#include <sys/zio.h>
@ -223,7 +224,7 @@ vdev_elevator_switch(vdev_t *v, char *elevator)
strfree(argv[2]);
#endif /* HAVE_ELEVATOR_CHANGE */
if (error) {
zfs_dbgmsg("Unable to set \"%s\" scheduler for %s (%s): %d\n",
zfs_dbgmsg("Unable to set \"%s\" scheduler for %s (%s): %d",
elevator, v->vdev_path, device, error);
}
}
@ -322,7 +323,7 @@ vdev_disk_open(vdev_t *v, uint64_t *psize, uint64_t *max_psize,
if (IS_ERR(bdev)) {
int error = -PTR_ERR(bdev);
vdev_dbgmsg(v, "open error=%d count=%d\n", error, count);
vdev_dbgmsg(v, "open error=%d count=%d", error, count);
vd->vd_bdev = NULL;
v->vdev_tsd = vd;
rw_exit(&vd->vd_lock);
@ -333,14 +334,22 @@ vdev_disk_open(vdev_t *v, uint64_t *psize, uint64_t *max_psize,
rw_exit(&vd->vd_lock);
}
struct request_queue *q = bdev_get_queue(vd->vd_bdev);
/* Determine the physical block size */
block_size = vdev_bdev_block_size(vd->vd_bdev);
/* Clear the nowritecache bit, causes vdev_reopen() to try again. */
v->vdev_nowritecache = B_FALSE;
/* Set when device reports it supports TRIM. */
v->vdev_has_trim = !!blk_queue_discard(q);
/* Set when device reports it supports secure TRIM. */
v->vdev_has_securetrim = !!blk_queue_discard_secure(q);
/* Inform the ZIO pipeline that we are non-rotational */
v->vdev_nonrot = blk_queue_nonrot(bdev_get_queue(vd->vd_bdev));
v->vdev_nonrot = blk_queue_nonrot(q);
/* Physical volume size in bytes for the partition */
*psize = bdev_capacity(vd->vd_bdev);
@ -728,6 +737,7 @@ vdev_disk_io_start(zio_t *zio)
{
vdev_t *v = zio->io_vd;
vdev_disk_t *vd = v->vdev_tsd;
unsigned long trim_flags = 0;
int rw, flags, error;
/*
@ -813,6 +823,19 @@ vdev_disk_io_start(zio_t *zio)
#endif
break;
case ZIO_TYPE_TRIM:
#if defined(BLKDEV_DISCARD_SECURE)
if (zio->io_trim_flags & ZIO_TRIM_SECURE)
trim_flags |= BLKDEV_DISCARD_SECURE;
#endif
zio->io_error = -blkdev_issue_discard(vd->vd_bdev,
zio->io_offset >> 9, zio->io_size >> 9, GFP_NOFS,
trim_flags);
rw_exit(&vd->vd_lock);
zio_interrupt(zio);
return;
default:
rw_exit(&vd->vd_lock);
zio->io_error = SET_ERROR(ENOTSUP);

View File

@ -28,10 +28,13 @@
#include <sys/spa_impl.h>
#include <sys/vdev_file.h>
#include <sys/vdev_impl.h>
#include <sys/vdev_trim.h>
#include <sys/zio.h>
#include <sys/fs/zfs.h>
#include <sys/fm/fs/zfs.h>
#include <sys/abd.h>
#include <sys/fcntl.h>
#include <sys/vnode.h>
/*
* Virtual device vector for files.
@ -60,9 +63,24 @@ vdev_file_open(vdev_t *vd, uint64_t *psize, uint64_t *max_psize,
vattr_t vattr;
int error;
/* Rotational optimizations only make sense on block devices */
/*
* Rotational optimizations only make sense on block devices.
*/
vd->vdev_nonrot = B_TRUE;
/*
* Allow TRIM on file based vdevs. This may not always be supported,
* since it depends on your kernel version and underlying filesystem
* type but it is always safe to attempt.
*/
vd->vdev_has_trim = B_TRUE;
/*
* Disable secure TRIM on file based vdevs. There is no way to
* request this behavior from the underlying filesystem.
*/
vd->vdev_has_securetrim = B_FALSE;
/*
* We must have a pathname, and it must be absolute.
*/
@ -227,6 +245,21 @@ vdev_file_io_start(zio_t *zio)
zio->io_error = SET_ERROR(ENOTSUP);
}
zio_execute(zio);
return;
} else if (zio->io_type == ZIO_TYPE_TRIM) {
struct flock flck;
ASSERT3U(zio->io_size, !=, 0);
bzero(&flck, sizeof (flck));
flck.l_type = F_FREESP;
flck.l_start = zio->io_offset;
flck.l_len = zio->io_size;
flck.l_whence = 0;
zio->io_error = VOP_SPACE(vf->vf_vnode, F_FREESP, &flck,
0, 0, kcred, NULL);
zio_execute(zio);
return;
}

View File

@ -33,12 +33,6 @@
#include <sys/zap.h>
#include <sys/dmu_tx.h>
/*
* Maximum number of metaslabs per group that can be initialized
* simultaneously.
*/
int max_initialize_ms = 3;
/*
* Value that is written to disk during initialization.
*/
@ -132,7 +126,7 @@ vdev_initialize_change_state(vdev_t *vd, vdev_initializing_state_t new_state)
dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
VERIFY0(dmu_tx_assign(tx, TXG_WAIT));
dsl_sync_task_nowait(spa_get_dsl(spa), vdev_initialize_zap_update_sync,
guid, 2, ZFS_SPACE_CHECK_RESERVED, tx);
guid, 2, ZFS_SPACE_CHECK_NONE, tx);
switch (new_state) {
case VDEV_INITIALIZE_ACTIVE:
@ -250,49 +244,6 @@ vdev_initialize_write(vdev_t *vd, uint64_t start, uint64_t size, abd_t *data)
return (0);
}
/*
* Translate a logical range to the physical range for the specified vdev_t.
* This function is initially called with a leaf vdev and will walk each
* parent vdev until it reaches a top-level vdev. Once the top-level is
* reached the physical range is initialized and the recursive function
* begins to unwind. As it unwinds it calls the parent's vdev specific
* translation function to do the real conversion.
*/
void
vdev_xlate(vdev_t *vd, const range_seg_t *logical_rs, range_seg_t *physical_rs)
{
/*
* Walk up the vdev tree
*/
if (vd != vd->vdev_top) {
vdev_xlate(vd->vdev_parent, logical_rs, physical_rs);
} else {
/*
* We've reached the top-level vdev, initialize the
* physical range to the logical range and start to
* unwind.
*/
physical_rs->rs_start = logical_rs->rs_start;
physical_rs->rs_end = logical_rs->rs_end;
return;
}
vdev_t *pvd = vd->vdev_parent;
ASSERT3P(pvd, !=, NULL);
ASSERT3P(pvd->vdev_ops->vdev_op_xlate, !=, NULL);
/*
* As this recursive function unwinds, translate the logical
* range into its physical components by calling the
* vdev specific translate function.
*/
range_seg_t intermediate = { { { 0, 0 } } };
pvd->vdev_ops->vdev_op_xlate(vd, physical_rs, &intermediate);
physical_rs->rs_start = intermediate.rs_start;
physical_rs->rs_end = intermediate.rs_end;
}
/*
* Callback to fill each ABD chunk with zfs_initialize_value. len must be
* divisible by sizeof (uint64_t), and buf must be 8-byte aligned. The ABD
@ -362,81 +313,6 @@ vdev_initialize_ranges(vdev_t *vd, abd_t *data)
return (0);
}
static void
vdev_initialize_mg_wait(metaslab_group_t *mg)
{
ASSERT(MUTEX_HELD(&mg->mg_ms_initialize_lock));
while (mg->mg_initialize_updating) {
cv_wait(&mg->mg_ms_initialize_cv, &mg->mg_ms_initialize_lock);
}
}
static void
vdev_initialize_mg_mark(metaslab_group_t *mg)
{
ASSERT(MUTEX_HELD(&mg->mg_ms_initialize_lock));
ASSERT(mg->mg_initialize_updating);
while (mg->mg_ms_initializing >= max_initialize_ms) {
cv_wait(&mg->mg_ms_initialize_cv, &mg->mg_ms_initialize_lock);
}
mg->mg_ms_initializing++;
ASSERT3U(mg->mg_ms_initializing, <=, max_initialize_ms);
}
/*
* Mark the metaslab as being initialized to prevent any allocations
* on this metaslab. We must also track how many metaslabs are currently
* being initialized within a metaslab group and limit them to prevent
* allocation failures from occurring because all metaslabs are being
* initialized.
*/
static void
vdev_initialize_ms_mark(metaslab_t *msp)
{
ASSERT(!MUTEX_HELD(&msp->ms_lock));
metaslab_group_t *mg = msp->ms_group;
mutex_enter(&mg->mg_ms_initialize_lock);
/*
* To keep an accurate count of how many threads are initializing
* a specific metaslab group, we only allow one thread to mark
* the metaslab group at a time. This ensures that the value of
* ms_initializing will be accurate when we decide to mark a metaslab
* group as being initialized. To do this we force all other threads
* to wait till the metaslab's mg_initialize_updating flag is no
* longer set.
*/
vdev_initialize_mg_wait(mg);
mg->mg_initialize_updating = B_TRUE;
if (msp->ms_initializing == 0) {
vdev_initialize_mg_mark(mg);
}
mutex_enter(&msp->ms_lock);
msp->ms_initializing++;
mutex_exit(&msp->ms_lock);
mg->mg_initialize_updating = B_FALSE;
cv_broadcast(&mg->mg_ms_initialize_cv);
mutex_exit(&mg->mg_ms_initialize_lock);
}
static void
vdev_initialize_ms_unmark(metaslab_t *msp)
{
ASSERT(!MUTEX_HELD(&msp->ms_lock));
metaslab_group_t *mg = msp->ms_group;
mutex_enter(&mg->mg_ms_initialize_lock);
mutex_enter(&msp->ms_lock);
if (--msp->ms_initializing == 0) {
mg->mg_ms_initializing--;
cv_broadcast(&mg->mg_ms_initialize_cv);
}
mutex_exit(&msp->ms_lock);
mutex_exit(&mg->mg_ms_initialize_lock);
}
static void
vdev_initialize_calculate_progress(vdev_t *vd)
{
@ -535,9 +411,8 @@ vdev_initialize_load(vdev_t *vd)
return (err);
}
/*
* Convert the logical range into a physcial range and add it to our
* Convert the logical range into a physical range and add it to our
* avl tree.
*/
void
@ -618,7 +493,8 @@ vdev_initialize_thread(void *arg)
ms_count = vd->vdev_top->vdev_ms_count;
}
vdev_initialize_ms_mark(msp);
spa_config_exit(spa, SCL_CONFIG, FTAG);
metaslab_disable(msp);
mutex_enter(&msp->ms_lock);
VERIFY0(metaslab_load(msp));
@ -626,16 +502,8 @@ vdev_initialize_thread(void *arg)
vd);
mutex_exit(&msp->ms_lock);
spa_config_exit(spa, SCL_CONFIG, FTAG);
error = vdev_initialize_ranges(vd, deadbeef);
/*
* Wait for the outstanding IO to be synced to prevent
* newly allocated blocks from being overwritten.
*/
txg_wait_synced(spa_get_dsl(spa), 0);
vdev_initialize_ms_unmark(msp);
metaslab_enable(msp, B_TRUE);
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
range_tree_vacate(vd->vdev_initialize_tree, NULL, NULL);
@ -853,12 +721,11 @@ vdev_initialize_restart(vdev_t *vd)
}
#if defined(_KERNEL)
EXPORT_SYMBOL(vdev_initialize_restart);
EXPORT_SYMBOL(vdev_xlate);
EXPORT_SYMBOL(vdev_initialize);
EXPORT_SYMBOL(vdev_initialize_stop);
EXPORT_SYMBOL(vdev_initialize_stop_all);
EXPORT_SYMBOL(vdev_initialize_stop_wait);
EXPORT_SYMBOL(vdev_initialize_restart);
/* CSTYLED */
module_param(zfs_initialize_value, ulong, 0644);

View File

@ -251,6 +251,9 @@ vdev_config_generate_stats(vdev_t *vd, nvlist_t *nv)
fnvlist_add_uint64(nvx, ZPOOL_CONFIG_VDEV_SCRUB_ACTIVE_QUEUE,
vsx->vsx_active_queue[ZIO_PRIORITY_SCRUB]);
fnvlist_add_uint64(nvx, ZPOOL_CONFIG_VDEV_TRIM_ACTIVE_QUEUE,
vsx->vsx_active_queue[ZIO_PRIORITY_TRIM]);
/* ZIOs pending */
fnvlist_add_uint64(nvx, ZPOOL_CONFIG_VDEV_SYNC_R_PEND_QUEUE,
vsx->vsx_pend_queue[ZIO_PRIORITY_SYNC_READ]);
@ -267,6 +270,9 @@ vdev_config_generate_stats(vdev_t *vd, nvlist_t *nv)
fnvlist_add_uint64(nvx, ZPOOL_CONFIG_VDEV_SCRUB_PEND_QUEUE,
vsx->vsx_pend_queue[ZIO_PRIORITY_SCRUB]);
fnvlist_add_uint64(nvx, ZPOOL_CONFIG_VDEV_TRIM_PEND_QUEUE,
vsx->vsx_pend_queue[ZIO_PRIORITY_TRIM]);
/* Histograms */
fnvlist_add_uint64_array(nvx, ZPOOL_CONFIG_VDEV_TOT_R_LAT_HISTO,
vsx->vsx_total_histo[ZIO_TYPE_READ],
@ -304,6 +310,10 @@ vdev_config_generate_stats(vdev_t *vd, nvlist_t *nv)
vsx->vsx_queue_histo[ZIO_PRIORITY_SCRUB],
ARRAY_SIZE(vsx->vsx_queue_histo[ZIO_PRIORITY_SCRUB]));
fnvlist_add_uint64_array(nvx, ZPOOL_CONFIG_VDEV_TRIM_LAT_HISTO,
vsx->vsx_queue_histo[ZIO_PRIORITY_TRIM],
ARRAY_SIZE(vsx->vsx_queue_histo[ZIO_PRIORITY_TRIM]));
/* Request sizes */
fnvlist_add_uint64_array(nvx, ZPOOL_CONFIG_VDEV_SYNC_IND_R_HISTO,
vsx->vsx_ind_histo[ZIO_PRIORITY_SYNC_READ],
@ -325,6 +335,10 @@ vdev_config_generate_stats(vdev_t *vd, nvlist_t *nv)
vsx->vsx_ind_histo[ZIO_PRIORITY_SCRUB],
ARRAY_SIZE(vsx->vsx_ind_histo[ZIO_PRIORITY_SCRUB]));
fnvlist_add_uint64_array(nvx, ZPOOL_CONFIG_VDEV_IND_TRIM_HISTO,
vsx->vsx_ind_histo[ZIO_PRIORITY_TRIM],
ARRAY_SIZE(vsx->vsx_ind_histo[ZIO_PRIORITY_TRIM]));
fnvlist_add_uint64_array(nvx, ZPOOL_CONFIG_VDEV_SYNC_AGG_R_HISTO,
vsx->vsx_agg_histo[ZIO_PRIORITY_SYNC_READ],
ARRAY_SIZE(vsx->vsx_agg_histo[ZIO_PRIORITY_SYNC_READ]));
@ -345,6 +359,10 @@ vdev_config_generate_stats(vdev_t *vd, nvlist_t *nv)
vsx->vsx_agg_histo[ZIO_PRIORITY_SCRUB],
ARRAY_SIZE(vsx->vsx_agg_histo[ZIO_PRIORITY_SCRUB]));
fnvlist_add_uint64_array(nvx, ZPOOL_CONFIG_VDEV_AGG_TRIM_HISTO,
vsx->vsx_agg_histo[ZIO_PRIORITY_TRIM],
ARRAY_SIZE(vsx->vsx_agg_histo[ZIO_PRIORITY_TRIM]));
/* IO delays */
fnvlist_add_uint64(nvx, ZPOOL_CONFIG_VDEV_SLOW_IOS, vs->vs_slow_ios);

View File

@ -156,6 +156,8 @@ uint32_t zfs_vdev_removal_min_active = 1;
uint32_t zfs_vdev_removal_max_active = 2;
uint32_t zfs_vdev_initializing_min_active = 1;
uint32_t zfs_vdev_initializing_max_active = 1;
uint32_t zfs_vdev_trim_min_active = 1;
uint32_t zfs_vdev_trim_max_active = 2;
/*
* When the pool has less than zfs_vdev_async_write_active_min_dirty_percent
@ -203,6 +205,12 @@ int zfs_vdev_queue_depth_pct = 300;
*/
int zfs_vdev_def_queue_depth = 32;
/*
* Allow TRIM I/Os to be aggregated. This should normally not be needed since
* TRIM I/O for extents up to zfs_trim_extent_bytes_max (128M) can be submitted
* by the TRIM code in zfs_trim.c.
*/
int zfs_vdev_aggregate_trim = 0;
int
vdev_queue_offset_compare(const void *x1, const void *x2)
@ -227,11 +235,13 @@ vdev_queue_class_tree(vdev_queue_t *vq, zio_priority_t p)
static inline avl_tree_t *
vdev_queue_type_tree(vdev_queue_t *vq, zio_type_t t)
{
ASSERT(t == ZIO_TYPE_READ || t == ZIO_TYPE_WRITE);
ASSERT(t == ZIO_TYPE_READ || t == ZIO_TYPE_WRITE || t == ZIO_TYPE_TRIM);
if (t == ZIO_TYPE_READ)
return (&vq->vq_read_offset_tree);
else
else if (t == ZIO_TYPE_WRITE)
return (&vq->vq_write_offset_tree);
else
return (&vq->vq_trim_offset_tree);
}
int
@ -266,6 +276,8 @@ vdev_queue_class_min_active(zio_priority_t p)
return (zfs_vdev_removal_min_active);
case ZIO_PRIORITY_INITIALIZING:
return (zfs_vdev_initializing_min_active);
case ZIO_PRIORITY_TRIM:
return (zfs_vdev_trim_min_active);
default:
panic("invalid priority %u", p);
return (0);
@ -338,6 +350,8 @@ vdev_queue_class_max_active(spa_t *spa, zio_priority_t p)
return (zfs_vdev_removal_max_active);
case ZIO_PRIORITY_INITIALIZING:
return (zfs_vdev_initializing_max_active);
case ZIO_PRIORITY_TRIM:
return (zfs_vdev_trim_max_active);
default:
panic("invalid priority %u", p);
return (0);
@ -398,19 +412,25 @@ vdev_queue_init(vdev_t *vd)
avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_WRITE),
vdev_queue_offset_compare, sizeof (zio_t),
offsetof(struct zio, io_offset_node));
avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_TRIM),
vdev_queue_offset_compare, sizeof (zio_t),
offsetof(struct zio, io_offset_node));
for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
int (*compfn) (const void *, const void *);
/*
* The synchronous i/o queues are dispatched in FIFO rather
* The synchronous/trim i/o queues are dispatched in FIFO rather
* than LBA order. This provides more consistent latency for
* these i/os.
*/
if (p == ZIO_PRIORITY_SYNC_READ || p == ZIO_PRIORITY_SYNC_WRITE)
if (p == ZIO_PRIORITY_SYNC_READ ||
p == ZIO_PRIORITY_SYNC_WRITE ||
p == ZIO_PRIORITY_TRIM) {
compfn = vdev_queue_timestamp_compare;
else
} else {
compfn = vdev_queue_offset_compare;
}
avl_create(vdev_queue_class_tree(vq, p), compfn,
sizeof (zio_t), offsetof(struct zio, io_queue_node));
}
@ -428,6 +448,7 @@ vdev_queue_fini(vdev_t *vd)
avl_destroy(&vq->vq_active_tree);
avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_READ));
avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_WRITE));
avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_TRIM));
mutex_destroy(&vq->vq_lock);
}
@ -559,6 +580,13 @@ vdev_queue_aggregate(vdev_queue_t *vq, zio_t *zio)
if (zio->io_flags & ZIO_FLAG_DONT_AGGREGATE || limit == 0)
return (NULL);
/*
* While TRIM commands could be aggregated based on offset this
* behavior is disabled until it's determined to be beneficial.
*/
if (zio->io_type == ZIO_TYPE_TRIM && !zfs_vdev_aggregate_trim)
return (NULL);
first = last = zio;
if (zio->io_type == ZIO_TYPE_READ)
@ -732,7 +760,7 @@ again:
* For LBA-ordered queues (async / scrub / initializing), issue the
* i/o which follows the most recently issued i/o in LBA (offset) order.
*
* For FIFO queues (sync), issue the i/o with the lowest timestamp.
* For FIFO queues (sync/trim), issue the i/o with the lowest timestamp.
*/
tree = vdev_queue_class_tree(vq, p);
vq->vq_io_search.io_timestamp = 0;
@ -783,20 +811,28 @@ vdev_queue_io(zio_t *zio)
* not match the child's i/o type. Fix it up here.
*/
if (zio->io_type == ZIO_TYPE_READ) {
ASSERT(zio->io_priority != ZIO_PRIORITY_TRIM);
if (zio->io_priority != ZIO_PRIORITY_SYNC_READ &&
zio->io_priority != ZIO_PRIORITY_ASYNC_READ &&
zio->io_priority != ZIO_PRIORITY_SCRUB &&
zio->io_priority != ZIO_PRIORITY_REMOVAL &&
zio->io_priority != ZIO_PRIORITY_INITIALIZING)
zio->io_priority != ZIO_PRIORITY_INITIALIZING) {
zio->io_priority = ZIO_PRIORITY_ASYNC_READ;
} else {
ASSERT(zio->io_type == ZIO_TYPE_WRITE);
}
} else if (zio->io_type == ZIO_TYPE_WRITE) {
ASSERT(zio->io_priority != ZIO_PRIORITY_TRIM);
if (zio->io_priority != ZIO_PRIORITY_SYNC_WRITE &&
zio->io_priority != ZIO_PRIORITY_ASYNC_WRITE &&
zio->io_priority != ZIO_PRIORITY_REMOVAL &&
zio->io_priority != ZIO_PRIORITY_INITIALIZING)
zio->io_priority != ZIO_PRIORITY_INITIALIZING) {
zio->io_priority = ZIO_PRIORITY_ASYNC_WRITE;
}
} else {
ASSERT(zio->io_type == ZIO_TYPE_TRIM);
ASSERT(zio->io_priority == ZIO_PRIORITY_TRIM);
}
zio->io_flags |= ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE;
@ -922,6 +958,9 @@ module_param(zfs_vdev_aggregation_limit_non_rotating, int, 0644);
MODULE_PARM_DESC(zfs_vdev_aggregation_limit_non_rotating,
"Max vdev I/O aggregation size for non-rotating media");
module_param(zfs_vdev_aggregate_trim, int, 0644);
MODULE_PARM_DESC(zfs_vdev_aggregate_trim, "Allow TRIM I/O to be aggregated");
module_param(zfs_vdev_read_gap_limit, int, 0644);
MODULE_PARM_DESC(zfs_vdev_read_gap_limit, "Aggregate read I/O over gap");
@ -995,6 +1034,14 @@ module_param(zfs_vdev_sync_write_min_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_sync_write_min_active,
"Min active sync write I/Os per vdev");
module_param(zfs_vdev_trim_max_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_trim_max_active,
"Max active trim/discard I/Os per vdev");
module_param(zfs_vdev_trim_min_active, int, 0644);
MODULE_PARM_DESC(zfs_vdev_trim_min_active,
"Min active trim/discard I/Os per vdev");
module_param(zfs_vdev_queue_depth_pct, int, 0644);
MODULE_PARM_DESC(zfs_vdev_queue_depth_pct,
"Queue depth percentage for each top-level vdev");

View File

@ -37,7 +37,7 @@
#include <sys/vdev_raidz_impl.h>
#ifdef ZFS_DEBUG
#include <sys/vdev_initialize.h> /* vdev_xlate testing */
#include <sys/vdev.h> /* For vdev_xlate() in vdev_raidz_io_verify() */
#endif
/*

View File

@ -45,6 +45,7 @@
#include <sys/vdev_indirect_mapping.h>
#include <sys/abd.h>
#include <sys/vdev_initialize.h>
#include <sys/vdev_trim.h>
#include <sys/trace_vdev.h>
/*
@ -1181,6 +1182,8 @@ vdev_remove_complete(spa_t *spa)
txg = spa_vdev_enter(spa);
vdev_t *vd = vdev_lookup_top(spa, spa->spa_vdev_removal->svr_vdev_id);
ASSERT3P(vd->vdev_initialize_thread, ==, NULL);
ASSERT3P(vd->vdev_trim_thread, ==, NULL);
ASSERT3P(vd->vdev_autotrim_thread, ==, NULL);
sysevent_t *ev = spa_event_create(spa, vd, NULL,
ESC_ZFS_VDEV_REMOVE_DEV);
@ -1869,8 +1872,10 @@ spa_vdev_remove_log(vdev_t *vd, uint64_t *txg)
spa_vdev_config_exit(spa, NULL, *txg, 0, FTAG);
/* Stop initializing */
/* Stop initializing and TRIM */
vdev_initialize_stop_all(vd, VDEV_INITIALIZE_CANCELED);
vdev_trim_stop_all(vd, VDEV_TRIM_CANCELED);
vdev_autotrim_stop_wait(vd);
*txg = spa_vdev_config_enter(spa);
@ -2051,11 +2056,13 @@ spa_vdev_remove_top(vdev_t *vd, uint64_t *txg)
error = spa_reset_logs(spa);
/*
* We stop any initializing that is currently in progress but leave
* the state as "active". This will allow the initializing to resume
* if the removal is canceled sometime later.
* We stop any initializing and TRIM that is currently in progress
* but leave the state as "active". This will allow the process to
* resume if the removal is canceled sometime later.
*/
vdev_initialize_stop_all(vd, VDEV_INITIALIZE_ACTIVE);
vdev_trim_stop_all(vd, VDEV_TRIM_ACTIVE);
vdev_autotrim_stop_wait(vd);
*txg = spa_vdev_config_enter(spa);
@ -2069,6 +2076,8 @@ spa_vdev_remove_top(vdev_t *vd, uint64_t *txg)
if (error != 0) {
metaslab_group_activate(mg);
spa_async_request(spa, SPA_ASYNC_INITIALIZE_RESTART);
spa_async_request(spa, SPA_ASYNC_TRIM_RESTART);
spa_async_request(spa, SPA_ASYNC_AUTOTRIM_RESTART);
return (error);
}

1460
module/zfs/vdev_trim.c Normal file

File diff suppressed because it is too large Load Diff

View File

@ -204,6 +204,7 @@
#include <sys/zfs_sysfs.h>
#include <sys/vdev_impl.h>
#include <sys/vdev_initialize.h>
#include <sys/vdev_trim.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
@ -3885,7 +3886,7 @@ zfs_ioc_destroy(zfs_cmd_t *zc)
/*
* innvl: {
* "initialize_command" -> POOL_INITIALIZE_{CANCEL|DO|SUSPEND} (uint64)
* "initialize_command" -> POOL_INITIALIZE_{CANCEL|START|SUSPEND} (uint64)
* "initialize_vdevs": { -> guids to initialize (nvlist)
* "vdev_path_1": vdev_guid_1, (uint64),
* "vdev_path_2": vdev_guid_2, (uint64),
@ -3919,7 +3920,7 @@ zfs_ioc_pool_initialize(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl)
}
if (!(cmd_type == POOL_INITIALIZE_CANCEL ||
cmd_type == POOL_INITIALIZE_DO ||
cmd_type == POOL_INITIALIZE_START ||
cmd_type == POOL_INITIALIZE_SUSPEND)) {
return (SET_ERROR(EINVAL));
}
@ -3957,6 +3958,91 @@ zfs_ioc_pool_initialize(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl)
return (total_errors > 0 ? EINVAL : 0);
}
/*
* innvl: {
* "trim_command" -> POOL_TRIM_{CANCEL|START|SUSPEND} (uint64)
* "trim_vdevs": { -> guids to TRIM (nvlist)
* "vdev_path_1": vdev_guid_1, (uint64),
* "vdev_path_2": vdev_guid_2, (uint64),
* ...
* },
* "trim_rate" -> Target TRIM rate in bytes/sec.
* "trim_secure" -> Set to request a secure TRIM.
* }
*
* outnvl: {
* "trim_vdevs": { -> TRIM errors (nvlist)
* "vdev_path_1": errno, see function body for possible errnos (uint64)
* "vdev_path_2": errno, ... (uint64)
* ...
* }
* }
*
* EINVAL is returned for an unknown commands or if any of the provided vdev
* guids have be specified with a type other than uint64.
*/
static const zfs_ioc_key_t zfs_keys_pool_trim[] = {
{ZPOOL_TRIM_COMMAND, DATA_TYPE_UINT64, 0},
{ZPOOL_TRIM_VDEVS, DATA_TYPE_NVLIST, 0},
{ZPOOL_TRIM_RATE, DATA_TYPE_UINT64, ZK_OPTIONAL},
{ZPOOL_TRIM_SECURE, DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
};
static int
zfs_ioc_pool_trim(const char *poolname, nvlist_t *innvl, nvlist_t *outnvl)
{
uint64_t cmd_type;
if (nvlist_lookup_uint64(innvl, ZPOOL_TRIM_COMMAND, &cmd_type) != 0)
return (SET_ERROR(EINVAL));
if (!(cmd_type == POOL_TRIM_CANCEL ||
cmd_type == POOL_TRIM_START ||
cmd_type == POOL_TRIM_SUSPEND)) {
return (SET_ERROR(EINVAL));
}
nvlist_t *vdev_guids;
if (nvlist_lookup_nvlist(innvl, ZPOOL_TRIM_VDEVS, &vdev_guids) != 0)
return (SET_ERROR(EINVAL));
for (nvpair_t *pair = nvlist_next_nvpair(vdev_guids, NULL);
pair != NULL; pair = nvlist_next_nvpair(vdev_guids, pair)) {
uint64_t vdev_guid;
if (nvpair_value_uint64(pair, &vdev_guid) != 0) {
return (SET_ERROR(EINVAL));
}
}
/* Optional, defaults to maximum rate when not provided */
uint64_t rate;
if (nvlist_lookup_uint64(innvl, ZPOOL_TRIM_RATE, &rate) != 0)
rate = 0;
/* Optional, defaults to standard TRIM when not provided */
boolean_t secure;
if (nvlist_lookup_boolean_value(innvl, ZPOOL_TRIM_SECURE,
&secure) != 0) {
secure = B_FALSE;
}
spa_t *spa;
int error = spa_open(poolname, &spa, FTAG);
if (error != 0)
return (error);
nvlist_t *vdev_errlist = fnvlist_alloc();
int total_errors = spa_vdev_trim(spa, vdev_guids, cmd_type,
rate, !!zfs_trim_metaslab_skip, secure, vdev_errlist);
if (fnvlist_size(vdev_errlist) > 0)
fnvlist_add_nvlist(outnvl, ZPOOL_TRIM_VDEVS, vdev_errlist);
fnvlist_free(vdev_errlist);
spa_close(spa, FTAG);
return (total_errors > 0 ? EINVAL : 0);
}
/*
* fsname is name of dataset to rollback (to most recent snapshot)
*
@ -6580,6 +6666,11 @@ zfs_ioctl_init(void)
POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE,
zfs_keys_pool_initialize, ARRAY_SIZE(zfs_keys_pool_initialize));
zfs_ioctl_register("trim", ZFS_IOC_POOL_TRIM,
zfs_ioc_pool_trim, zfs_secpolicy_config, POOL_NAME,
POOL_CHECK_SUSPENDED | POOL_CHECK_READONLY, B_TRUE, B_TRUE,
zfs_keys_pool_trim, ARRAY_SIZE(zfs_keys_pool_trim));
/* IOCTLS that use the legacy function signature */
zfs_ioctl_register_legacy(ZFS_IOC_POOL_FREEZE, zfs_ioc_pool_freeze,

View File

@ -358,7 +358,8 @@ pool_property_show(struct kobject *kobj, struct attribute *attr, char *buf)
*/
static const char *zfs_features[] = {
/* --> Add new kernel features here (post ZoL 0.8.0) */
"vdev_initialize"
"initialize",
"trim",
};
#define ZFS_FEATURE_COUNT ARRAY_SIZE(zfs_features)

View File

@ -32,6 +32,7 @@
#include <sys/txg.h>
#include <sys/spa_impl.h>
#include <sys/vdev_impl.h>
#include <sys/vdev_trim.h>
#include <sys/zio_impl.h>
#include <sys/zio_compress.h>
#include <sys/zio_checksum.h>
@ -58,7 +59,7 @@ const char *zio_type_name[ZIO_TYPES] = {
* Note: Linux kernel thread name length is limited
* so these names will differ from upstream open zfs.
*/
"z_null", "z_rd", "z_wr", "z_fr", "z_cl", "z_ioctl"
"z_null", "z_rd", "z_wr", "z_fr", "z_cl", "z_ioctl", "z_trim"
};
int zio_dva_throttle_enabled = B_TRUE;
@ -761,7 +762,7 @@ zio_create(zio_t *pio, spa_t *spa, uint64_t txg, const blkptr_t *bp,
{
zio_t *zio;
ASSERT3U(psize, <=, SPA_MAXBLOCKSIZE);
IMPLY(type != ZIO_TYPE_TRIM, psize <= SPA_MAXBLOCKSIZE);
ASSERT(P2PHASE(psize, SPA_MINBLOCKSIZE) == 0);
ASSERT(P2PHASE(offset, SPA_MINBLOCKSIZE) == 0);
@ -1211,6 +1212,26 @@ zio_ioctl(zio_t *pio, spa_t *spa, vdev_t *vd, int cmd,
return (zio);
}
zio_t *
zio_trim(zio_t *pio, vdev_t *vd, uint64_t offset, uint64_t size,
zio_done_func_t *done, void *private, zio_priority_t priority,
enum zio_flag flags, enum trim_flag trim_flags)
{
zio_t *zio;
ASSERT0(vd->vdev_children);
ASSERT0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
ASSERT0(P2PHASE(size, 1ULL << vd->vdev_ashift));
ASSERT3U(size, !=, 0);
zio = zio_create(pio, vd->vdev_spa, 0, NULL, NULL, size, size, done,
private, ZIO_TYPE_TRIM, priority, flags | ZIO_FLAG_PHYSICAL,
vd, offset, NULL, ZIO_STAGE_OPEN, ZIO_TRIM_PIPELINE);
zio->io_trim_flags = trim_flags;
return (zio);
}
zio_t *
zio_read_phys(zio_t *pio, vdev_t *vd, uint64_t offset, uint64_t size,
abd_t *data, int checksum, zio_done_func_t *done, void *private,
@ -3562,7 +3583,6 @@ zio_alloc_zil(spa_t *spa, objset_t *os, uint64_t txg, blkptr_t *new_bp,
* ==========================================================================
*/
/*
* Issue an I/O to the underlying vdev. Typically the issue pipeline
* stops after this stage and will resume upon I/O completion.
@ -3685,8 +3705,8 @@ zio_vdev_io_start(zio_t *zio)
return (zio);
}
if (vd->vdev_ops->vdev_op_leaf &&
(zio->io_type == ZIO_TYPE_READ || zio->io_type == ZIO_TYPE_WRITE)) {
if (vd->vdev_ops->vdev_op_leaf && (zio->io_type == ZIO_TYPE_READ ||
zio->io_type == ZIO_TYPE_WRITE || zio->io_type == ZIO_TYPE_TRIM)) {
if (zio->io_type == ZIO_TYPE_READ && vdev_cache_read(zio))
return (zio);
@ -3717,7 +3737,8 @@ zio_vdev_io_done(zio_t *zio)
return (NULL);
}
ASSERT(zio->io_type == ZIO_TYPE_READ || zio->io_type == ZIO_TYPE_WRITE);
ASSERT(zio->io_type == ZIO_TYPE_READ ||
zio->io_type == ZIO_TYPE_WRITE || zio->io_type == ZIO_TYPE_TRIM);
if (zio->io_delay)
zio->io_delay = gethrtime() - zio->io_delay;
@ -3736,7 +3757,7 @@ zio_vdev_io_done(zio_t *zio)
if (zio_injection_enabled && zio->io_error == 0)
zio->io_error = zio_handle_label_injection(zio, EIO);
if (zio->io_error) {
if (zio->io_error && zio->io_type != ZIO_TYPE_TRIM) {
if (!vdev_accessible(vd, zio)) {
zio->io_error = SET_ERROR(ENXIO);
} else {
@ -3866,8 +3887,8 @@ zio_vdev_io_assess(zio_t *zio)
/*
* If a cache flush returns ENOTSUP or ENOTTY, we know that no future
* attempts will ever succeed. In this case we set a persistent bit so
* that we don't bother with it in the future.
* attempts will ever succeed. In this case we set a persistent
* boolean flag so that we don't bother with it in the future.
*/
if ((zio->io_error == ENOTSUP || zio->io_error == ENOTTY) &&
zio->io_type == ZIO_TYPE_IOCTL &&

View File

@ -470,6 +470,17 @@ tags = ['functional', 'cli_root', 'zpool_status']
tests = ['zpool_sync_001_pos', 'zpool_sync_002_neg']
tags = ['functional', 'cli_root', 'zpool_sync']
[tests/functional/cli_root/zpool_trim]
tests = ['zpool_trim_attach_detach_add_remove',
'zpool_trim_import_export', 'zpool_trim_multiple', 'zpool_trim_neg',
'zpool_trim_offline_export_import_online', 'zpool_trim_online_offline',
'zpool_trim_partial', 'zpool_trim_rate', 'zpool_trim_rate_neg',
'zpool_trim_secure', 'zpool_trim_split', 'zpool_trim_start_and_cancel_neg',
'zpool_trim_start_and_cancel_pos', 'zpool_trim_suspend_resume',
'zpool_trim_unsupported_vdevs', 'zpool_trim_verify_checksums',
'zpool_trim_verify_trimmed']
tags = ['functional', 'zpool_trim']
[tests/functional/cli_root/zpool_upgrade]
tests = ['zpool_upgrade_001_pos', 'zpool_upgrade_002_pos',
'zpool_upgrade_003_pos', 'zpool_upgrade_004_pos',
@ -839,6 +850,11 @@ tags = ['functional', 'threadsappend']
tests = ['tmpfile_001_pos', 'tmpfile_002_pos', 'tmpfile_003_pos']
tags = ['functional', 'tmpfile']
[tests/functional/trim]
tests = ['autotrim_integrity', 'autotrim_config', 'autotrim_trim_integrity',
'trim_integrity', 'trim_config']
tags = ['functional', 'trim']
[tests/functional/truncate]
tests = ['truncate_001_pos', 'truncate_002_pos', 'truncate_timestamps']
tags = ['functional', 'truncate']

View File

@ -128,6 +128,13 @@ enospc_reason = 'Exact free space reporting is not guaranteed'
#
fio_reason = 'Fio v2.3 or newer required'
#
# Some tests require that the DISKS provided support the discard operation.
# Normally this is not an issue because loop back devices are used for DISKS
# and they support discard (TRIM/UNMAP).
#
trim_reason = 'DISKS must support discard (TRIM/UNMAP)'
#
# Some tests are not applicable to Linux or need to be updated to operate
# in the manor required by Linux. Any tests which are skipped for this
@ -235,6 +242,7 @@ maybe = {
['FAIL', rewind_reason],
'cli_root/zpool_import/zpool_import_missing_003_pos': ['SKIP', '6839'],
'cli_root/zpool_remove/setup': ['SKIP', disk_reason],
'cli_root/zpool_trim/setup': ['SKIP', trim_reason],
'cli_root/zpool_upgrade/zpool_upgrade_004_pos': ['FAIL', '6141'],
'cli_user/misc/arc_summary3_001_pos': ['SKIP', python_reason],
'delegate/setup': ['SKIP', exec_reason],
@ -267,6 +275,7 @@ maybe = {
'snapused/snapused_004_pos': ['FAIL', '5513'],
'tmpfile/setup': ['SKIP', tmpfile_reason],
'threadsappend/threadsappend_001_pos': ['FAIL', '6136'],
'trim/setup': ['SKIP', trim_reason],
'upgrade/upgrade_projectquota_001_pos': ['SKIP', project_id_reason],
'user_namespace/setup': ['SKIP', user_ns_reason],
'userquota/setup': ['SKIP', exec_reason],

View File

@ -169,7 +169,7 @@ lzc_ioctl_run(zfs_ioc_t ioc, const char *name, nvlist_t *innvl, int expected)
}
/*
* Test each ioc for the folowing ioctl input errors:
* Test each ioc for the following ioctl input errors:
* ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
* ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
* ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
@ -650,7 +650,7 @@ test_vdev_initialize(const char *pool)
fnvlist_add_uint64(vdev_guids, "path", 0xdeadbeefdeadbeef);
fnvlist_add_uint64(required, ZPOOL_INITIALIZE_COMMAND,
POOL_INITIALIZE_DO);
POOL_INITIALIZE_START);
fnvlist_add_nvlist(required, ZPOOL_INITIALIZE_VDEVS, vdev_guids);
IOC_INPUT_TEST(ZFS_IOC_POOL_INITIALIZE, pool, required, NULL, EINVAL);
@ -658,6 +658,25 @@ test_vdev_initialize(const char *pool)
nvlist_free(required);
}
static void
test_vdev_trim(const char *pool)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *vdev_guids = fnvlist_alloc();
fnvlist_add_uint64(vdev_guids, "path", 0xdeadbeefdeadbeef);
fnvlist_add_uint64(required, ZPOOL_TRIM_COMMAND, POOL_TRIM_START);
fnvlist_add_nvlist(required, ZPOOL_TRIM_VDEVS, vdev_guids);
fnvlist_add_uint64(optional, ZPOOL_TRIM_RATE, 1ULL << 30);
fnvlist_add_boolean_value(optional, ZPOOL_TRIM_SECURE, B_TRUE);
IOC_INPUT_TEST(ZFS_IOC_POOL_TRIM, pool, required, optional, EINVAL);
nvlist_free(vdev_guids);
nvlist_free(optional);
nvlist_free(required);
}
static int
zfs_destroy(const char *dataset)
{
@ -749,6 +768,7 @@ zfs_ioc_input_tests(const char *pool)
test_unload_key(dataset);
test_vdev_initialize(pool);
test_vdev_trim(pool);
/*
* cleanup
@ -888,6 +908,7 @@ validate_ioc_values(void)
ZFS_IOC_BASE + 77 == ZFS_IOC_POOL_CHECKPOINT &&
ZFS_IOC_BASE + 78 == ZFS_IOC_POOL_DISCARD_CHECKPOINT &&
ZFS_IOC_BASE + 79 == ZFS_IOC_POOL_INITIALIZE &&
ZFS_IOC_BASE + 80 == ZFS_IOC_POOL_TRIM &&
LINUX_IOC_BASE + 1 == ZFS_IOC_EVENTS_NEXT &&
LINUX_IOC_BASE + 2 == ZFS_IOC_EVENTS_CLEAR &&
LINUX_IOC_BASE + 3 == ZFS_IOC_EVENTS_SEEK);

View File

@ -23,10 +23,12 @@
# Copyright 2009 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# Copyright (c) 2012, 2017 by Delphix. All rights reserved.
# Copyright 2016 Nexenta Systems, Inc.
# Copyright (c) 2017 by Tim Chase. All rights reserved.
# Copyright (c) 2017 by Nexenta Systems, Inc. All rights reserved.
# Copyright (c) 2017 Lawrence Livermore National Security, LLC.
# Copyright (c) 2017 Datto Inc.
# Copyright (c) 2017 Open-E, Inc. All Rights Reserved.
# Use is subject to license terms.
#
. ${STF_TOOLS}/include/logapi.shlib
@ -1092,14 +1094,14 @@ function fill_fs # destdir dirnum filenum bytes num_writes data
typeset -i filenum=${3:-50}
typeset -i bytes=${4:-8192}
typeset -i num_writes=${5:-10240}
typeset -i data=${6:-0}
typeset data=${6:-0}
typeset -i odirnum=1
typeset -i idirnum=0
typeset -i fn=0
typeset -i retval=0
log_must mkdir -p $destdir/$idirnum
mkdir -p $destdir/$idirnum
while (($odirnum > 0)); do
if ((dirnum >= 0 && idirnum >= dirnum)); then
odirnum=0
@ -1115,7 +1117,7 @@ function fill_fs # destdir dirnum filenum bytes num_writes data
if (($fn >= $filenum)); then
fn=0
((idirnum = idirnum + 1))
log_must mkdir -p $destdir/$idirnum
mkdir -p $destdir/$idirnum
else
((fn = fn + 1))
fi

View File

@ -68,6 +68,7 @@ SUBDIRS = \
sparse \
threadsappend \
tmpfile \
trim \
truncate \
upgrade \
user_namespace \

View File

@ -59,4 +59,5 @@ SUBDIRS = \
zpool_split \
zpool_status \
zpool_sync \
zpool_trim \
zpool_upgrade

View File

@ -57,6 +57,7 @@ typeset -a properties=(
"fragmentation"
"leaked"
"multihost"
"autotrim"
"feature@async_destroy"
"feature@empty_bpobj"
"feature@lz4_compress"

View File

@ -0,0 +1,22 @@
pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/cli_root/zpool_trim
dist_pkgdata_SCRIPTS = \
setup.ksh \
cleanup.ksh \
zpool_trim.kshlib \
zpool_trim_attach_detach_add_remove.ksh \
zpool_trim_import_export.ksh \
zpool_trim_multiple.ksh \
zpool_trim_neg.ksh \
zpool_trim_offline_export_import_online.ksh \
zpool_trim_online_offline.ksh \
zpool_trim_partial.ksh \
zpool_trim_rate.ksh \
zpool_trim_rate_neg.ksh \
zpool_trim_secure.ksh \
zpool_trim_split.ksh \
zpool_trim_start_and_cancel_neg.ksh \
zpool_trim_start_and_cancel_pos.ksh \
zpool_trim_suspend_resume.ksh \
zpool_trim_unsupported_vdevs.ksh \
zpool_trim_verify_checksums.ksh \
zpool_trim_verify_trimmed.ksh

View File

@ -0,0 +1,34 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
verify_runnable "global"
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if poolexists $TESTPOOL1; then
destroy_pool $TESTPOOL1
fi
default_cleanup

View File

@ -0,0 +1,37 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
verify_runnable "global"
DISK1=${DISKS%% *}
typeset -i max_discard=0
if [[ -b $DEV_RDSKDIR/$DISK1 ]]; then
max_discard=$(lsblk -Dbn $DEV_RDSKDIR/$DISK1 | awk '{ print $4; exit }')
fi
if test $max_discard -eq 0; then
log_unsupported "DISKS do not support discard (TRIM/UNMAP)"
fi
log_pass

View File

@ -0,0 +1,43 @@
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2016 by Delphix. All rights reserved.
# Copyright (c) 2019 by Lawrence Livermore National Security, LLC.
#
function trim_prog_line # pool disk
{
typeset pool="$1"
typeset disk="$2"
zpool status -t "$pool" | grep "$disk" | grep "[[:digit:]]* trimmed"
}
function trim_progress # pool disk
{
trim_prog_line "$1" "$2" | sed 's/.*(\([0-9]\{1,\}\)% trimmed.*/\1/g'
}
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if poolexists $TESTPOOL1; then
destroy_pool $TESTPOOL1
fi
}
log_onexit cleanup

View File

@ -0,0 +1,64 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Detaching/attaching, adding/removing data devices works with trimming.
#
# STRATEGY:
# 1. Create a single-disk pool.
# 2. Start trimming.
# 3. Attach a second disk, ensure trimming continues.
# 4. Detach the second disk, ensure trimming continues.
# 5. Add a second disk, ensure trimming continues.
# 6. Remove the first disk, ensure trimming stops.
#
DISK1="$(echo $DISKS | cut -d' ' -f1)"
DISK2="$(echo $DISKS | cut -d' ' -f2)"
log_must zpool create -f $TESTPOOL $DISK1
log_must zpool trim -r 128M $TESTPOOL $DISK1
progress="$(trim_progress $TESTPOOL $DISK1)"
[[ -z "$progress" ]] && log_fail "Trim did not start"
log_must zpool attach $TESTPOOL $DISK1 $DISK2
new_progress="$(trim_progress $TESTPOOL $DISK1)"
[[ "$progress" -le "$new_progress" ]] || \
log_fail "Lost trimming progress on demotion to child vdev"
progress="$new_progress"
log_must zpool detach $TESTPOOL $DISK2
new_progress="$(trim_progress $TESTPOOL $DISK1)"
[[ "$progress" -le "$new_progress" ]] || \
log_fail "Lost trimming progress on promotion to top vdev"
progress="$new_progress"
log_must zpool add $TESTPOOL $DISK2
log_must zpool remove $TESTPOOL $DISK1
[[ -z "$(trim_prog_line $TESTPOOL $DISK1)" ]] || \
log_fail "Trimming continued after initiating removal"
log_pass "Trimming worked as expected across attach/detach and add/remove"

View File

@ -0,0 +1,88 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Trimming automatically resumes across import/export.
#
# STRATEGY:
# 1. Create a one-disk pool.
# 2. Start trimming and verify that trimming is active.
# 3. Export the pool.
# 4. Import the pool.
# 5. Verify that trimming resumes and progress does not regress.
# 6. Suspend trimming.
# 7. Repeat steps 3-4.
# 8. Verify that progress does not regress but trimming is still suspended.
#
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if [[ -d "$TESTDIR" ]]; then
rm -rf "$TESTDIR"
fi
}
LARGEFILE="$TESTDIR/largefile"
log_must mkdir "$TESTDIR"
log_must truncate -s 10G "$LARGEFILE"
log_must zpool create -f $TESTPOOL $LARGEFILE
log_must zpool trim -r 256M $TESTPOOL
sleep 2
progress="$(trim_progress $TESTPOOL $LARGEFILE)"
[[ -z "$progress" ]] && log_fail "Trimming did not start"
log_must zpool export $TESTPOOL
log_must zpool import -d $TESTDIR $TESTPOOL
new_progress="$(trim_progress $TESTPOOL $LARGEFILE)"
[[ -z "$new_progress" ]] && log_fail "Trimming did not restart after import"
[[ "$progress" -le "$new_progress" ]] || \
log_fail "Trimming lost progress after import"
log_mustnot eval "trim_prog_line $TESTPOOL $LARGEFILE | grep suspended"
log_must zpool trim -s $TESTPOOL $LARGEFILE
action_date="$(trim_prog_line $TESTPOOL $LARGEFILE | \
sed 's/.*ed at \(.*\)).*/\1/g')"
log_must zpool export $TESTPOOL
log_must zpool import -d $TESTDIR $TESTPOOL
new_action_date=$(trim_prog_line $TESTPOOL $LARGEFILE | \
sed 's/.*ed at \(.*\)).*/\1/g')
[[ "$action_date" != "$new_action_date" ]] && \
log_fail "Trimming action date did not persist across export/import"
[[ "$new_progress" -le "$(trim_progress $TESTPOOL $LARGEFILE)" ]] || \
log_fail "Trimming lost progress after import"
log_must eval "trim_prog_line $TESTPOOL $LARGEFILE | grep suspended"
log_pass "Trimming retains state as expected across export/import"

View File

@ -0,0 +1,65 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Trimming can be performed multiple times
#
# STRATEGY:
# 1. Create a pool with a single disk.
# 2. Trim the entire pool.
# 3. Verify trimming is reset (status, offset, and action date).
# 4. Repeat steps 2 and 3 with the existing pool.
#
DISK1=${DISKS%% *}
log_must zpool create -f $TESTPOOL $DISK1
typeset action_date="none"
for n in {1..3}; do
log_must zpool trim -r 2G $TESTPOOL
log_mustnot eval "trim_prog_line $TESTPOOL $DISK1 | grep complete"
[[ "$(trim_progress $TESTPOOL $DISK1)" -lt "100" ]] ||
log_fail "Trimming progress wasn't reset"
new_action_date="$(trim_prog_line $TESTPOOL $DISK1 | \
sed 's/.*ed at \(.*\)).*/\1/g')"
[[ "$action_date" != "$new_action_date" ]] ||
log_fail "Trimming action date wasn't reset"
action_date=$new_action_date
while [[ "$(trim_progress $TESTPOOL $DISK1)" -lt "100" ]]; do
progress="$(trim_progress $TESTPOOL $DISK1)"
sleep 0.5
[[ "$progress" -le "$(trim_progress $TESTPOOL $DISK1)" ]] ||
log_fail "Trimming progress regressed"
done
log_must eval "trim_prog_line $TESTPOOL $DISK1 | grep complete"
sleep 1
done
log_pass "Trimming multiple times performs as expected"

View File

@ -0,0 +1,53 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# A badly formed parameter passed to 'zpool trim' should
# return an error.
#
# STRATEGY:
# 1. Create an array containing bad 'zpool trim' parameters.
# 2. For each element, execute the sub-command.
# 3. Verify it returns an error.
#
DISK1=${DISKS%% *}
DISK2="$(echo $DISKS | cut -d' ' -f2)"
verify_runnable "global"
set -A args "1" "-a" "-?" "--%" "-123456" "0.5" "-o" "-b" "-b no" "-z 2"
log_assert "Execute 'zpool trim' using invalid parameters."
log_must zpool create -f $TESTPOOL mirror $DISK1 $DISK2
typeset -i i=0
while [[ $i -lt ${#args[*]} ]]; do
log_mustnot zpool trim ${args[i]} $TESTPOOL
((i = i + 1))
done
log_pass "Invalid parameters to 'zpool trim' fail as expected."

View File

@ -0,0 +1,62 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Miscellaneous complex sequences of operations function as expected.
#
# STRATEGY:
# 1. Create a pool with a two-way mirror.
# 2. Start trimming, offline, export, import, online and verify that
# trimming state is preserved / trimming behaves as expected
# at each step.
#
DISK1="$(echo $DISKS | cut -d' ' -f1)"
DISK2="$(echo $DISKS | cut -d' ' -f2)"
log_must zpool create -f $TESTPOOL mirror $DISK1 $DISK2
log_must zpool trim -r 128M $TESTPOOL $DISK1
log_must zpool offline $TESTPOOL $DISK1
progress="$(trim_progress $TESTPOOL $DISK1)"
[[ -z "$progress" ]] && log_fail "Trimming did not start"
log_mustnot eval "trim_prog_line $TESTPOOL $DISK1 | grep suspended"
log_must zpool export $TESTPOOL
log_must zpool import $TESTPOOL
new_progress="$(trim_progress $TESTPOOL $DISK1)"
[[ -z "$new_progress" ]] && log_fail "Trimming did not start after import"
[[ "$new_progress" -ge "$progress" ]] || \
log_fail "Trimming lost progress after import"
log_mustnot eval "trim_prog_line $TESTPOOL $DISK1 | grep suspended"
log_must zpool online $TESTPOOL $DISK1
new_progress="$(trim_progress $TESTPOOL $DISK1)"
[[ "$new_progress" -ge "$progress" ]] || \
log_fail "Trimming lost progress after online"
log_pass "Trimming behaves as expected at each step of:" \
"trim + offline + export + import + online"

View File

@ -0,0 +1,70 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Trimming automatically resumes across offline/online.
#
# STRATEGY:
# 1. Create a pool with a two-way mirror.
# 2. Start trimming one of the disks and verify that trimming is active.
# 3. Offline the disk.
# 4. Online the disk.
# 5. Verify that trimming resumes and progress does not regress.
# 6. Suspend trimming.
# 7. Repeat steps 3-4 and verify that trimming does not resume.
#
DISK1=${DISKS%% *}
DISK2="$(echo $DISKS | cut -d' ' -f2)"
log_must zpool create -f $TESTPOOL mirror $DISK1 $DISK2
log_must zpool trim -r 128M $TESTPOOL $DISK1
log_must zpool offline $TESTPOOL $DISK1
progress="$(trim_progress $TESTPOOL $DISK1)"
[[ -z "$progress" ]] && log_fail "Trimming did not start"
log_must zpool online $TESTPOOL $DISK1
new_progress="$(trim_progress $TESTPOOL $DISK1)"
[[ -z "$new_progress" ]] && \
log_fail "Trimming did not restart after onlining"
[[ "$progress" -le "$new_progress" ]] || \
log_fail "Trimming lost progress after onlining"
log_mustnot eval "trim_prog_line $TESTPOOL $DISK1 | grep suspended"
log_must zpool trim -s $TESTPOOL $DISK1
action_date="$(trim_prog_line $TESTPOOL $DISK1 | \
sed 's/.*ed at \(.*\)).*/\1/g')"
log_must zpool offline $TESTPOOL $DISK1
log_must zpool online $TESTPOOL $DISK1
new_action_date=$(trim_prog_line $TESTPOOL $DISK1 | \
sed 's/.*ed at \(.*\)).*/\1/g')
[[ "$action_date" != "$new_action_date" ]] && \
log_fail "Trimming action date did not persist across offline/online"
log_must eval "trim_prog_line $TESTPOOL $DISK1 | grep suspended"
log_pass "Trimming performs as expected across offline/online"

View File

@ -0,0 +1,114 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Verify 'zpool trim' partial trim.
#
# STRATEGY:
# 1. Create a pool on a single disk and mostly fill it.
# 2. Expand the pool to create new unallocated metaslabs.
# 3. Run 'zpool trim' to only TRIM allocated space maps.
# 4. Verify the disk is least 90% of its original size.
# 5. Run 'zpool trim' to perform a full TRIM.
# 6. Verify the disk is less than 10% of its original size.
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if [[ -d "$TESTDIR" ]]; then
rm -rf "$TESTDIR"
fi
log_must set_tunable64 zfs_trim_metaslab_skip 0
log_must set_tunable64 zfs_trim_extent_bytes_min $trim_extent_bytes_min
log_must set_tunable64 zfs_vdev_min_ms_count $vdev_min_ms_count
}
log_onexit cleanup
LARGESIZE=$((MINVDEVSIZE * 4))
LARGEFILE="$TESTDIR/largefile"
# The minimum number of metaslabs is increased in order to simulate the
# behavior of partial trimming on a more typically sized 1TB disk.
typeset vdev_min_ms_count=$(get_tunable zfs_vdev_min_ms_count)
log_must set_tunable64 zfs_vdev_min_ms_count 64
# Minimum trim size is decreased to verify all trim sizes.
typeset trim_extent_bytes_min=$(get_tunable zfs_trim_extent_bytes_min)
log_must set_tunable64 zfs_trim_extent_bytes_min 4096
log_must mkdir "$TESTDIR"
log_must truncate -s $LARGESIZE "$LARGEFILE"
log_must zpool create $TESTPOOL "$LARGEFILE"
log_must mkfile $(( floor(LARGESIZE * 0.80) )) /$TESTPOOL/file
log_must zpool sync
new_size=$(du -B1 "$LARGEFILE" | cut -f1)
log_must test $new_size -le $LARGESIZE
log_must test $new_size -gt $(( floor(LARGESIZE * 0.70) ))
# Expand the pool to create new unallocated metaslabs.
log_must zpool export $TESTPOOL
log_must dd if=/dev/urandom of=$LARGEFILE conv=notrunc,nocreat \
seek=$((LARGESIZE / (1024 * 1024))) bs=$((1024 * 1024)) \
count=$((3 * LARGESIZE / (1024 * 1024)))
log_must zpool import -d $TESTDIR $TESTPOOL
log_must zpool online -e $TESTPOOL "$LARGEFILE"
new_size=$(du -B1 "$LARGEFILE" | cut -f1)
log_must test $new_size -gt $((4 * floor(LARGESIZE * 0.70) ))
# Perform a partial trim, we expect it to skip most of the new metaslabs
# which have never been used and therefore do not need be trimmed.
log_must set_tunable64 zfs_trim_metaslab_skip 1
log_must zpool trim $TESTPOOL
log_must set_tunable64 zfs_trim_metaslab_skip 0
log_must zpool sync
while [[ "$(trim_progress $TESTPOOL $LARGEFILE)" -lt "100" ]]; do
sleep 0.5
done
new_size=$(du -B1 "$LARGEFILE" | cut -f1)
log_must test $new_size -gt $LARGESIZE
# Perform a full trim, all metaslabs will be trimmed the pool vdev
# size will be reduced but not down to its original size due to the
# space usage of the new metaslabs.
log_must zpool trim $TESTPOOL
log_must zpool sync
while [[ "$(trim_progress $TESTPOOL $LARGEFILE)" -lt "100" ]]; do
sleep 0.5
done
new_size=$(du -B1 "$LARGEFILE" | cut -f1)
log_must test $new_size -le $(( 2 * LARGESIZE))
log_must test $new_size -gt $(( floor(LARGESIZE * 0.70) ))
log_pass "Manual 'zpool trim' successfully partially trimmed pool"

View File

@ -0,0 +1,90 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Verify 'zpool trim -r <rate>' rate limiting.
#
# STRATEGY:
# 1. Create a pool on a single disk.
# 2. Manually TRIM the pool with rate limiting.
# 3. Verify the TRIM can be suspended.
# 4. Restart the TRIM and verify the rate is preserved.
#
# NOTE: The tolerances and delays used in the test below are intentionally
# set be to fairly large since we are capping the maximum trim rate. The
# actual trim rate can be lower. The critical thing is that the trim rate
# is limited, the rate is preserved when resuming, and it can be changed.
#
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if [[ -d "$TESTDIR" ]]; then
rm -rf "$TESTDIR"
fi
}
log_onexit cleanup
LARGEFILE="$TESTDIR/largefile"
log_must mkdir "$TESTDIR"
log_must truncate -s 10G "$LARGEFILE"
log_must zpool create -f $TESTPOOL "$LARGEFILE"
# Start trimming at 200M/s for 5 seconds (approximately 10% of the pool)
log_must zpool trim -r 200M $TESTPOOL
log_must sleep 4
progress=$(trim_progress $TESTPOOL $LARGEFILE)
log_must zpool trim -s $TESTPOOL
log_must eval "trim_prog_line $TESTPOOL $LARGEFILE | grep suspended"
log_must within_tolerance 10 $progress 5
# Resuming trimming at 200M/s for 5 seconds (approximately 20% of the pool)
log_must zpool trim $TESTPOOL
log_must sleep 4
progress=$(trim_progress $TESTPOOL $LARGEFILE)
log_must zpool trim -s $TESTPOOL
log_must eval "trim_prog_line $TESTPOOL $LARGEFILE | grep suspended"
log_must within_tolerance 20 $progress 10
# Increase trimming to 600M/s for 5 seconds (approximately 50% of the pool)
log_must zpool trim -r 600M $TESTPOOL
log_must sleep 4
progress=$(trim_progress $TESTPOOL $LARGEFILE)
log_must zpool trim -s $TESTPOOL
log_must eval "trim_prog_line $TESTPOOL $LARGEFILE | grep suspended"
log_must within_tolerance 50 $progress 15
# Set maximum trim rate for 5 seconds (100% of the pool)
log_must zpool trim -r 1T $TESTPOOL
log_must sleep 4
progress=$(trim_progress $TESTPOOL $LARGEFILE)
log_must eval "trim_prog_line $TESTPOOL $LARGEFILE | grep complete"
log_must within_tolerance 100 $progress 0
log_pass "Manual TRIM rate throttles as expected"

View File

@ -0,0 +1,53 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# A badly formed parameter passed to 'zpool trim -r' should
# return an error.
#
# STRATEGY:
# 1. Create an array containing bad 'zpool trim -r' parameters.
# 2. For each element, execute the sub-command.
# 3. Verify it returns an error.
#
DISK1=${DISKS%% *}
DISK2="$(echo $DISKS | cut -d' ' -f2)"
verify_runnable "global"
set -A args "a" "--%" "10X" "yes" "-?" "z 99"
log_assert "Execute 'zpool trim -r' using invalid parameters."
log_must zpool create -f $TESTPOOL mirror $DISK1 $DISK2
typeset -i i=0
while [[ $i -lt ${#args[*]} ]]; do
log_mustnot zpool trim -r ${args[i]} $TESTPOOL
((i = i + 1))
done
log_pass "Invalid parameters to 'zpool trim -r' fail as expected."

View File

@ -0,0 +1,59 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Verify 'zpool trim -d' secure trim.
#
# STRATEGY:
# 1. Create a pool on a single file vdev.
# 2. Run 'zpool trim -d' to securely TRIM allocated space maps.
# 3. Verify it fails when using a file vdev.
#
# NOTE: Currently secure discard cannot be verified using file vdevs,
# loopback, or scsi_debug devices. None of which support the feature.
# It can only be tested using real SSDs which provide support.
#
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if [[ -d "$TESTDIR" ]]; then
rm -rf "$TESTDIR"
fi
}
log_onexit cleanup
LARGESIZE=$((MINVDEVSIZE * 4))
LARGEFILE="$TESTDIR/largefile"
log_must mkdir "$TESTDIR"
log_must truncate -s $LARGESIZE "$LARGEFILE"
log_must zpool create $TESTPOOL "$LARGEFILE"
log_mustnot zpool trim -d $TESTPOOL
log_pass "Manual 'zpool trim -d' failed as expected for file vdevs"

View File

@ -0,0 +1,60 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Trimming state is preserved across zpool split.
#
# STRATEGY:
# 1. Create a pool with a two-way mirror.
# 2. Start trimming both devices.
# 3. Split the pool. Ensure trimming continues on the original.
# 4. Import the new pool. Ensure trimming resumes on it.
#
DISK1="$(echo $DISKS | cut -d' ' -f1)"
DISK2="$(echo $DISKS | cut -d' ' -f2)"
POOL2="${TESTPOOL}_split"
log_must zpool create -f $TESTPOOL mirror $DISK1 $DISK2
log_must zpool trim $TESTPOOL $DISK1 $DISK2
orig_prog1="$(trim_progress $TESTPOOL $DISK1)"
orig_prog2="$(trim_progress $TESTPOOL $DISK2)"
[[ -z "$orig_prog1" ]] && log_fail "Trimming did not start"
log_must zpool split $TESTPOOL $TESTPOOL1 $DISK2
# Ensure trimming continued as expected on the original pool.
[[ "$(trim_progress $TESTPOOL $DISK1)" -ge "$orig_prog1" ]] || \
log_fail "Trimming lost progress on original pool"
log_mustnot eval "trim_prog_line $TESTPOOL $DISK1 | grep suspended"
log_must zpool import $TESTPOOL1
[[ "$(trim_progress $TESTPOOL1 $DISK2)" -ge "$orig_prog2" ]] || \
log_fail "Trimming lost progress on split pool"
log_mustnot eval "trim_prog_line $TESTPOOL1 $DISK1 | grep suspended"
log_pass "Trimming behaves as expected on zpool split"

View File

@ -0,0 +1,56 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Cancelling and suspending trim doesn't work if not all specified vdevs
# are being trimmed.
#
# STRATEGY:
# 1. Create a three-disk pool.
# 2. Start trimming and verify that trimming is active.
# 3. Try to cancel and suspend trimming on the non-trimming disks.
# 4. Try to re-trim the currently trimming disk.
#
DISK1=${DISKS%% *}
DISK2="$(echo $DISKS | cut -d' ' -f2)"
DISK3="$(echo $DISKS | cut -d' ' -f3)"
log_must zpool list -v
log_must zpool create -f $TESTPOOL $DISK1 $DISK2 $DISK3
log_must zpool trim -r 128M $TESTPOOL $DISK1
[[ -z "$(trim_progress $TESTPOOL $DISK1)" ]] && \
log_fail "Trim did not start"
log_mustnot zpool trim -c $TESTPOOL $DISK2
log_mustnot zpool trim -c $TESTPOOL $DISK2 $DISK3
log_mustnot zpool trim -s $TESTPOOL $DISK2
log_mustnot zpool trim -s $TESTPOOL $DISK2 $DISK3
log_mustnot zpool trim $TESTPOOL $DISK1
log_pass "Nonsensical trim operations fail"

View File

@ -0,0 +1,48 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_initialize/zpool_initialize.kshlib
#
# DESCRIPTION:
# Starting and stopping an initialize works.
#
# STRATEGY:
# 1. Create a one-disk pool.
# 2. Start initializing and verify that initializing is active.
# 3. Cancel initializing and verify that initializing is not active.
#
DISK1=${DISKS%% *}
log_must zpool create -f $TESTPOOL $DISK1
log_must zpool initialize $TESTPOOL
[[ -z "$(initialize_progress $TESTPOOL $DISK1)" ]] && \
log_fail "Initialize did not start"
log_must zpool initialize -c $TESTPOOL
[[ -z "$(initialize_progress $TESTPOOL $DISK1)" ]] || \
log_fail "Initialize did not stop"
log_pass "Initialize start + cancel works"

View File

@ -0,0 +1,74 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Suspending and resuming trimming works.
#
# STRATEGY:
# 1. Create a one-disk pool.
# 2. Start trimming and verify that trimming is active.
# 3. Wait 3 seconds, then suspend trimming and verify that the progress
# reporting says so.
# 4. Wait 3 seconds and ensure trimming progress doesn't advance.
# 5. Restart trimming and verify that the progress doesn't regress.
#
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if [[ -d "$TESTDIR" ]]; then
rm -rf "$TESTDIR"
fi
}
LARGEFILE="$TESTDIR/largefile"
log_must mkdir "$TESTDIR"
log_must truncate -s 10G "$LARGEFILE"
log_must zpool create -f $TESTPOOL $LARGEFILE
log_must zpool trim -r 256M $TESTPOOL
sleep 2
[[ -z "$(trim_progress $TESTPOOL $LARGEFILE)" ]] && \
log_fail "Trimming did not start"
sleep 3
log_must zpool trim -s $TESTPOOL
log_must eval "trim_prog_line $TESTPOOL $LARGEFILE | grep suspended"
progress="$(trim_progress $TESTPOOL $LARGEFILE)"
sleep 3
[[ "$progress" -eq "$(trim_progress $TESTPOOL $LARGEFILE)" ]] || \
log_fail "Trimming progress advanced while suspended"
log_must zpool trim $TESTPOOL $LARGEFILE
[[ "$progress" -le "$(trim_progress $TESTPOOL $LARGEFILE)" ]] ||
log_fail "Trimming progress regressed after resuming"
log_pass "Suspend + resume trimming works as expected"

View File

@ -0,0 +1,70 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Attempting to trim unsupported vdevs should fail.
#
# STRATEGY:
# 1. Create a pool with the following configuration:
# root
# mirror
# vdev0
# vdev1 (offline)
# cache
# vdev2
# spare
# vdev3
# 2. Try to trim vdev1, vdev2, and vdev3. Ensure that all 3 fail.
#
function cleanup
{
if datasetexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if [[ -d $TESTDIR ]]; then
log_must rm -rf $TESTDIR
fi
}
log_onexit cleanup
log_must mkdir $TESTDIR
set -A FDISKS
for n in {0..2}; do
log_must mkfile $MINVDEVSIZE $TESTDIR/vdev$n
FDISKS+=("$TESTDIR/vdev$n")
done
FDISKS+=("${DISKS%% *}")
log_must zpool create $TESTPOOL mirror ${FDISKS[0]} ${FDISKS[1]} \
spare ${FDISKS[2]} cache ${FDISKS[3]}
log_must zpool offline $TESTPOOL ${FDISKS[1]}
log_mustnot zpool trim $TESTPOOL mirror-0
for n in {1..3}; do
log_mustnot zpool trim $TESTPOOL ${FDISKS[$n]}
done
log_pass "Attempting to trim failed on unsupported devices"

View File

@ -0,0 +1,69 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Trimming does not cause file corruption.
#
# STRATEGY:
# 1. Create a one-disk pool.
# 2. Write data to the pool.
# 3. Start trimming and verify that trimming is active.
# 4. Write more data to the pool.
# 5. Export the pool and use zdb to validate checksums.
#
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if [[ -d "$TESTDIR" ]]; then
rm -rf "$TESTDIR"
fi
}
log_onexit cleanup
LARGESIZE=$((MINVDEVSIZE * 4))
LARGEFILE="$TESTDIR/largefile"
log_must mkdir "$TESTDIR"
log_must truncate -s $LARGESIZE "$LARGEFILE"
log_must zpool create $TESTPOOL "$LARGEFILE"
log_must dd if=/dev/urandom of=/$TESTPOOL/file1 bs=1048576 count=64
log_must zpool sync
log_must zpool trim $TESTPOOL
[[ -z "$(trim_progress $TESTPOOL $DISK1)" ]] && \
log_fail "Trimming did not start"
log_must dd if=/dev/urandom of=/$TESTPOOL/file2 bs=1048576 count=64
log_must zpool sync
log_must zpool export $TESTPOOL
log_must zdb -e -p "$TESTDIR" -cc $TESTPOOL
log_pass "Trimming does not corrupt existing or new data"

View File

@ -0,0 +1,81 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_initialize/zpool_initialize.kshlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# After trimming, the disk is actually trimmed.
#
# STRATEGY:
# 1. Create a one-disk pool using a sparse file.
# 2. Initialize the pool and verify the file vdev is no longer sparse.
# 3. Trim the pool and verify the file vdev is again sparse.
#
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if [[ -d "$TESTDIR" ]]; then
rm -rf "$TESTDIR"
fi
log_must set_tunable64 zfs_trim_extent_bytes_min $trim_extent_bytes_min
}
log_onexit cleanup
LARGESIZE=$((MINVDEVSIZE * 4))
LARGEFILE="$TESTDIR/largefile"
# Reduce trim size to allow for tighter tolerance below when checking.
typeset trim_extent_bytes_min=$(get_tunable zfs_trim_extent_bytes_min)
log_must set_tunable64 zfs_trim_extent_bytes_min 4096
log_must mkdir "$TESTDIR"
log_must truncate -s $LARGESIZE "$LARGEFILE"
log_must zpool create $TESTPOOL "$LARGEFILE"
original_size=$(du -B1 "$LARGEFILE" | cut -f1)
log_must zpool initialize $TESTPOOL
while [[ "$(initialize_progress $TESTPOOL $LARGEFILE)" -lt "100" ]]; do
sleep 0.5
done
new_size=$(du -B1 "$LARGEFILE" | cut -f1)
log_must within_tolerance $new_size $LARGESIZE $((128 * 1024 * 1024))
log_must zpool trim $TESTPOOL
while [[ "$(trim_progress $TESTPOOL $LARGEFILE)" -lt "100" ]]; do
sleep 0.5
done
new_size=$(du -B1 "$LARGEFILE" | cut -f1)
log_must within_tolerance $new_size $original_size $((128 * 1024 * 1024))
log_pass "Trimmed appropriate amount of disk space"

View File

@ -0,0 +1,11 @@
pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/trim
dist_pkgdata_SCRIPTS = \
setup.ksh \
cleanup.ksh \
trim.kshlib \
trim.cfg \
autotrim_integrity.ksh \
autotrim_config.ksh \
autotrim_trim_integrity.ksh \
trim_integrity.ksh \
trim_config.ksh

View File

@ -0,0 +1,103 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/trim/trim.kshlib
. $STF_SUITE/tests/functional/trim/trim.cfg
#
# DESCRIPTION:
# Check various pool geometries stripe, mirror, raidz)
#
# STRATEGY:
# 1. Create a pool on file vdevs to trim.
# 2. Set 'autotrim=on' on pool.
# 3. Fill the pool to a known percentage of capacity.
# 4. Verify the vdevs contain 75% or more allocated blocks.
# 5. Remove all files making it possible to trim the entire pool.
# 6. Wait for auto trim to issue trim IOs for the free blocks.
# 7. Verify the disks contain 30% or less allocated blocks.
# 8. Repeat for test for striped, mirrored, and RAIDZ pools.
verify_runnable "global"
log_assert "Set 'autotrim=on' verify pool disks were trimmed"
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
log_must rm -f $TRIM_VDEVS
log_must set_tunable64 zfs_trim_extent_bytes_min $trim_extent_bytes_min
log_must set_tunable64 zfs_trim_txg_batch $trim_txg_batch
log_must set_tunable64 zfs_vdev_min_ms_count $vdev_min_ms_count
}
log_onexit cleanup
# Minimum trim size is decreased to verify all trim sizes.
typeset trim_extent_bytes_min=$(get_tunable zfs_trim_extent_bytes_min)
log_must set_tunable64 zfs_trim_extent_bytes_min 4096
# Reduced zfs_trim_txg_batch to make trimming more frequent.
typeset trim_txg_batch=$(get_tunable zfs_trim_txg_batch)
log_must set_tunable64 zfs_trim_txg_batch 8
# Increased metaslabs to better simulate larger more realistic devices.
typeset vdev_min_ms_count=$(get_tunable zfs_vdev_min_ms_count)
log_must set_tunable64 zfs_vdev_min_ms_count 32
typeset VDEV_MAX_MB=$(( floor(4 * MINVDEVSIZE * 0.75 / 1024 / 1024) ))
typeset VDEV_MIN_MB=$(( floor(4 * MINVDEVSIZE * 0.30 / 1024 / 1024) ))
for type in "" "mirror" "raidz2"; do
if [[ "$type" = "" ]]; then
VDEVS="$TRIM_VDEV1"
elif [[ "$type" = "mirror" ]]; then
VDEVS="$TRIM_VDEV1 $TRIM_VDEV2"
else
VDEVS="$TRIM_VDEV1 $TRIM_VDEV2 $TRIM_VDEV3"
fi
log_must truncate -s $((4 * MINVDEVSIZE)) $VDEVS
log_must zpool create -f $TESTPOOL $VDEVS
log_must zpool set autotrim=on $TESTPOOL
typeset availspace=$(get_prop available $TESTPOOL)
typeset fill_mb=$(( floor(availspace * 0.90 / 1024 / 1024) ))
# Fill the pool, verify the vdevs are no longer sparse.
file_write -o create -f /$TESTPOOL/file -b 1048576 -c $fill_mb -d R
verify_vdevs "-gt" "$VDEV_MAX_MB" $VDEVS
# Remove the file, wait for trim, verify the vdevs are now sparse.
log_must rm /$TESTPOOL/file
wait_trim_io $TESTPOOL "ind" 64
verify_vdevs "-le" "$VDEV_MIN_MB" $VDEVS
log_must zpool destroy $TESTPOOL
log_must rm -f $VDEVS
done
log_pass "Auto trim successfully shrunk vdevs"

View File

@ -0,0 +1,87 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/trim/trim.kshlib
. $STF_SUITE/tests/functional/trim/trim.cfg
#
# DESCRIPTION:
# Verify automatic trim pool data integrity.
#
# STRATEGY:
# 1. Create a pool on sparse file vdevs to trim.
# 2. Set autotrim=on to enable asynchronous pool trimming.
# 3. Generate some interesting pool data which can be trimmed.
# 4. Verify trim IOs of the expected type were issued for the pool.
# 5. Verify data integrity of the pool after trim.
# 6. Repeat test for striped, mirrored, and RAIDZ pools.
verify_runnable "global"
log_assert "Set 'autotrim=on' pool property verify pool data integrity"
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
log_must rm -f $TRIM_VDEVS
log_must set_tunable64 zfs_trim_extent_bytes_min $trim_extent_bytes_min
log_must set_tunable64 zfs_trim_txg_batch $trim_txg_batch
}
log_onexit cleanup
# Minimum trim size is decreased to verify all trim sizes.
typeset trim_extent_bytes_min=$(get_tunable zfs_trim_extent_bytes_min)
log_must set_tunable64 zfs_trim_extent_bytes_min 4096
# Reduced zfs_trim_txg_batch to make trimming more frequent.
typeset trim_txg_batch=$(get_tunable zfs_trim_txg_batch)
log_must set_tunable64 zfs_trim_txg_batch 8
for type in "" "mirror" "raidz" "raidz2" "raidz3"; do
log_must truncate -s 1G $TRIM_VDEVS
log_must zpool create -f $TESTPOOL $type $TRIM_VDEVS
log_must zpool set autotrim=on $TESTPOOL
# Add and remove data from the pool in a random fashion in order
# to generate a variety of interesting ranges to be auto trimmed.
for n in {0..10}; do
dir="/$TESTPOOL/autotrim-$((RANDOM % 5))"
filesize=$((4096 + ((RANDOM * 691) % 131072) ))
log_must rm -rf $dir
log_must fill_fs $dir 10 10 $filesize 1 R
zpool sync
done
log_must du -hs /$TESTPOOL
verify_trim_io $TESTPOOL "ind" 10
verify_pool $TESTPOOL
log_must zpool destroy $TESTPOOL
log_must rm -f $TRIM_VDEVS
done
log_pass "Automatic trim successfully validated"

View File

@ -0,0 +1,93 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/trim/trim.kshlib
. $STF_SUITE/tests/functional/trim/trim.cfg
#
# DESCRIPTION:
# Verify automatic trim and manual trim coexist correctly.
#
# STRATEGY:
# 1. Create a pool on sparse file vdevs to trim.
# 2. Set autotrim=on to enable asynchronous pool trimming.
# 3. Generate some interesting pool data which can be trimmed.
# 4. While generating data issue manual trims.
# 4. Verify trim IOs of the expected type were issued for the pool.
# 5. Verify data integrity of the pool after trim.
# 6. Repeat test for striped, mirrored, and RAIDZ pools.
verify_runnable "global"
log_assert "Set 'autotrim=on', run 'zpool trim' and verify pool data integrity"
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
log_must rm -f $TRIM_VDEVS
log_must set_tunable64 zfs_trim_extent_bytes_min $trim_extent_bytes_min
log_must set_tunable64 zfs_trim_txg_batch $trim_txg_batch
}
log_onexit cleanup
# Minimum trim size is decreased to verify all trim sizes.
typeset trim_extent_bytes_min=$(get_tunable zfs_trim_extent_bytes_min)
log_must set_tunable64 zfs_trim_extent_bytes_min 4096
# Reduced zfs_trim_txg_batch to make trimming more frequent.
typeset trim_txg_batch=$(get_tunable zfs_trim_txg_batch)
log_must set_tunable64 zfs_trim_txg_batch 8
for type in "" "mirror" "raidz" "raidz2" "raidz3"; do
log_must truncate -s 1G $TRIM_VDEVS
log_must zpool create -f $TESTPOOL $type $TRIM_VDEVS
log_must zpool set autotrim=on $TESTPOOL
# Add and remove data from the pool in a random fashion in order
# to generate a variety of interesting ranges to be auto trimmed.
for n in {0..10}; do
dir="/$TESTPOOL/autotrim-$((RANDOM % 5))"
filesize=$((4096 + ((RANDOM * 691) % 131072) ))
log_must rm -rf $dir
log_must fill_fs $dir 10 10 $filesize 1 R
zpool sync
if [[ $((n % 4)) -eq 0 ]]; then
log_must zpool trim $TESTPOOL
wait_trim $TESTPOOL $TRIM_VDEVS
fi
done
log_must du -hs /$TESTPOOL
verify_trim_io $TESTPOOL "ind" 10
verify_pool $TESTPOOL
log_must zpool destroy $TESTPOOL
log_must rm -f $TRIM_VDEVS
done
log_pass "Automatic trim and manual trim coexistence successfully validated"

View File

@ -0,0 +1,48 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
verify_runnable "global"
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
if poolexists $TESTPOOL1; then
destroy_pool $TESTPOOL1
fi
TRIM_DIR="$TEST_BASE_DIR"
TRIM_VDEVS="$TRIM_DIR/trim-vdev1 $TRIM_DIR/trim-vdev2 \
$TRIM_DIR/trim-vdev3 $TRIM_DIR/trim-vdev4"
rm -rf $TRIM_VDEVS
default_cleanup

View File

@ -0,0 +1,37 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
verify_runnable "global"
DISK1=${DISKS%% *}
typeset -i max_discard=0
if [[ -b $DEV_RDSKDIR/$DISK1 ]]; then
max_discard=$(lsblk -Dbn $DEV_RDSKDIR/$DISK1 | awk '{ print $4; exit }')
fi
if test $max_discard -eq 0; then
log_unsupported "DISKS do not support discard (TRIM/UNMAP)"
fi
log_pass

View File

@ -0,0 +1,33 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
TRIM_DIR="$TEST_BASE_DIR"
TRIM_VDEV1="$TRIM_DIR/trim-vdev1"
TRIM_VDEV2="$TRIM_DIR/trim-vdev2"
TRIM_VDEV3="$TRIM_DIR/trim-vdev3"
TRIM_VDEV4="$TRIM_DIR/trim-vdev4"
TRIM_VDEVS="$TRIM_VDEV1 $TRIM_VDEV2 $TRIM_VDEV3 $TRIM_VDEV4"

View File

@ -0,0 +1,154 @@
#!/bin/ksh -p
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# Get the actual on disk disk for the provided file.
#
function get_size_mb
{
typeset rval=$(du --block-size 1048576 -s "$1" | awk '{print $1}')
echo -n "$rval"
}
#
# Get the number of trim IOs issued for the pool (ind or agg).
#
function get_trim_io
{
typeset pool="${1-:$TESTPOOL}"
typeset type="${2-:ind}"
typeset rval
# Sum the ind or agg columns of the trim request size histogram.
case "$type" in
"ind")
rval=$(zpool iostat -pr $pool | awk \
'$1 ~ /[0-9].*/ { sum += $12 } END { print sum }')
echo -n "$rval"
;;
"agg")
rval=$(zpool iostat -pr $pool | awk \
'$1 ~ /[0-9].*/ { sum += $13 } END { print sum }')
echo -n "$rval"
;;
*)
log_fail "Type must be 'ind' or 'agg'"
;;
esac
}
#
# Verify that trim IOs were send to devices in the pool.
#
function verify_trim_io
{
typeset pool="${1:-$TESTPOOL}"
typeset type="${2:-ind}"
typeset min_trim_ios=${3:-100}
typeset ios
ios=$(get_trim_io $pool $type)
if [[ $ios -ge $min_trim_ios ]]; then
log_note "Issued $ios $type trim IOs for pool $pool"
else
log_fail "Too few trim IOs issued $ios/$min_trim_ios"
fi
}
#
# Run N txgs which should be enough to trim the entire pool.
#
function wait_trim_io # pool type txgs
{
typeset pool="${1-:$TESTPOOL}"
typeset type="${2-:ind}"
typeset txgs=${3:-10}
typeset timeout=120
typeset stop_time=$(( $(date +%s) + $timeout ))
typeset -i i=0
while [[ $i -lt $txgs ]]; do
if [ "$(date +%s)" -ge $stop_time ]; then
log_fail "Exceeded trim time limit of ${timeout}s"
return
fi
zpool sync -f
((i = i + 1))
done
typeset ios=$(get_trim_io $pool $type)
log_note "Waited for $txgs txgs, $ios $type TRIM IOs"
}
#
# Verify that file vdevs against a target value.
#
function verify_vdevs # op size vdevs
{
typeset tgt_op=$1
typeset tgt_size=$2
shift 2
typeset vdevs=$@
for vdev in $vdevs; do
typeset size=$(get_size_mb $vdev)
if test $size $tgt_op $tgt_size; then
log_note "Success $vdev is $size MB which is $tgt_op" \
"than $tgt_size MB"
else
log_fail "Failure $vdev is $size MB which is not" \
"$tgt_op than $tgt_size MB"
fi
done
}
#
# Wait for up to 120 seconds for trimming of the listed vdevs to complete.
#
function wait_trim # pool vdevs
{
typeset stop_time=$(( $(date +%s) + 120 ))
typeset pool="$1"
shift
typeset vdevs=$@
typeset complete
while [[ $complete -eq 0 ]]; do
complete=1
for vdev in $vdevs; do
if [[ "$(trim_progress $pool $vdev)" -lt "100" ]]; then
complete=0
break
else
log_must eval "trim_prog_line $pool $vdev | \
grep complete"
fi
done
if [ "$(date +%s)" -ge $stop_time ]; then
log_fail "Exceeded trim time limit of 120s"
fi
sleep 0.5
done
log_note "Pool completed trim successfully."
}

View File

@ -0,0 +1,103 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/trim/trim.kshlib
. $STF_SUITE/tests/functional/trim/trim.cfg
#
# DESCRIPTION:
# Check various pool geometries stripe, mirror, raidz
#
# STRATEGY:
# 1. Create a pool on file vdevs to trim.
# 2. Fill the pool to a known percentage of capacity.
# 3. Verify the vdevs contain 75% or more allocated blocks.
# 4. Remove all files making it possible to trim the entire pool.
# 5. Manually trim the pool.
# 6. Wait for trim to issue trim IOs for the free blocks.
# 7. Verify the disks contain 30% or less allocated blocks.
# 8. Repeat for test for striped, mirrored, and RAIDZ pools.
verify_runnable "global"
log_assert "Run 'zpool trim' verify pool disks were trimmed"
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
log_must rm -f $TRIM_VDEVS
log_must set_tunable64 zfs_trim_extent_bytes_min $trim_extent_bytes_min
log_must set_tunable64 zfs_trim_txg_batch $trim_txg_batch
log_must set_tunable64 zfs_vdev_min_ms_count $vdev_min_ms_count
}
log_onexit cleanup
# Minimum trim size is decreased to verify all trim sizes.
typeset trim_extent_bytes_min=$(get_tunable zfs_trim_extent_bytes_min)
log_must set_tunable64 zfs_trim_extent_bytes_min 4096
# Reduced zfs_trim_txg_batch to make trimming more frequent.
typeset trim_txg_batch=$(get_tunable zfs_trim_txg_batch)
log_must set_tunable64 zfs_trim_txg_batch 8
# Increased metaslabs to better simulate larger more realistic devices.
typeset vdev_min_ms_count=$(get_tunable zfs_vdev_min_ms_count)
log_must set_tunable64 zfs_vdev_min_ms_count 32
typeset VDEV_MAX_MB=$(( floor(4 * MINVDEVSIZE * 0.75 / 1024 / 1024) ))
typeset VDEV_MIN_MB=$(( floor(4 * MINVDEVSIZE * 0.30 / 1024 / 1024) ))
for type in "" "mirror" "raidz2"; do
if [[ "$type" = "" ]]; then
VDEVS="$TRIM_VDEV1"
elif [[ "$type" = "mirror" ]]; then
VDEVS="$TRIM_VDEV1 $TRIM_VDEV2"
else
VDEVS="$TRIM_VDEV1 $TRIM_VDEV2 $TRIM_VDEV3"
fi
log_must truncate -s $((4 * MINVDEVSIZE)) $VDEVS
log_must zpool create -f $TESTPOOL $type $VDEVS
typeset availspace=$(get_prop available $TESTPOOL)
typeset fill_mb=$(( floor(availspace * 0.90 / 1024 / 1024) ))
# Fill the pool, verify the vdevs are no longer sparse.
file_write -o create -f /$TESTPOOL/file -b 1048576 -c $fill_mb -d R
verify_vdevs "-gt" "$VDEV_MAX_MB" $VDEVS
# Remove the file, issue trim, verify the vdevs are now sparse.
log_must rm /$TESTPOOL/file
log_must zpool trim $TESTPOOL
wait_trim $TESTPOOL $VDEVS
verify_vdevs "-le" "$VDEV_MIN_MB" $VDEVS
log_must zpool destroy $TESTPOOL
log_must rm -f $VDEVS
done
log_pass "Manual trim successfully shrunk vdevs"

View File

@ -0,0 +1,89 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/trim/trim.kshlib
. $STF_SUITE/tests/functional/trim/trim.cfg
#
# DESCRIPTION:
# Verify manual trim pool data integrity.
#
# STRATEGY:
# 1. Create a pool on sparse file vdevs to trim.
# 2. Generate some interesting pool data which can be trimmed.
# 3. Manually trim the pool.
# 4. Verify trim IOs of the expected type were issued for the pool.
# 5. Verify data integrity of the pool after trim.
# 6. Repeat test for striped, mirrored, and RAIDZ pools.
verify_runnable "global"
log_assert "Run 'zpool trim' and verify pool data integrity"
function cleanup
{
if poolexists $TESTPOOL; then
destroy_pool $TESTPOOL
fi
log_must rm -f $TRIM_VDEVS
log_must set_tunable64 zfs_trim_extent_bytes_min $trim_extent_bytes_min
log_must set_tunable64 zfs_trim_txg_batch $trim_txg_batch
}
log_onexit cleanup
# Minimum trim size is decreased to verify all trim sizes.
typeset trim_extent_bytes_min=$(get_tunable zfs_trim_extent_bytes_min)
log_must set_tunable64 zfs_trim_extent_bytes_min 4096
# Reduced zfs_trim_txg_batch to make trimming more frequent.
typeset trim_txg_batch=$(get_tunable zfs_trim_txg_batch)
log_must set_tunable64 zfs_trim_txg_batch 8
for type in "" "mirror" "raidz" "raidz2" "raidz3"; do
log_must truncate -s 1G $TRIM_VDEVS
log_must zpool create -f $TESTPOOL $type $TRIM_VDEVS
# Add and remove data from the pool in a random fashion in order
# to generate a variety of interesting ranges to be manually trimmed.
for n in {0..10}; do
dir="/$TESTPOOL/trim-$((RANDOM % 5))"
filesize=$((4096 + ((RANDOM * 691) % 131072) ))
log_must rm -rf $dir
log_must fill_fs $dir 10 10 $filesize 1 R
zpool sync
done
log_must du -hs /$TESTPOOL
log_must zpool trim $TESTPOOL
wait_trim $TESTPOOL $TRIM_VDEVS
verify_trim_io $TESTPOOL "ind" 10
verify_pool $TESTPOOL
log_must zpool destroy $TESTPOOL
log_must rm -f $TRIM_VDEVS
done
log_pass "Manual trim successfully validated"