Fix typos in tests/

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #9250

tests/zfs-tests/cmd/mmapwrite/mmapwrite.c

@@ -43,7 +43,7 @@
  *    is hold) occurred, zfs_dirty_inode open a txg failed, and wait previous
  *    txg "n" completed.
  * 3. context #1 call uiomove to write, however page fault is occurred in
- *    uiomove, which means it need mm_sem, but mm_sem is hold by
+ *    uiomove, which means it needs mm_sem, but mm_sem is hold by
  *    context #2, so it stuck and can't complete, then txg "n" will not
  *    complete.
  *

tests/zfs-tests/include/blkdev.shlib

@@ -131,7 +131,7 @@ function is_loop_device #disk
 }
 
 #
-# Check if the given device is a multipath device and if there is a sybolic
+# Check if the given device is a multipath device and if there is a symbolic
 # link to a device mapper and to a disk
 # Currently no support for dm devices alone without multipath
 #

tests/zfs-tests/include/libtest.shlib

@@ -856,7 +856,7 @@ function zero_partitions #<whole_disk_name>
 # Size should be specified with units as per
 # the `format` command requirements eg. 100mb 3gb
 #
-# NOTE: This entire interface is problematic for the Linux parted utilty
+# NOTE: This entire interface is problematic for the Linux parted utility
 # which requires the end of the partition to be specified.  It would be
 # best to retire this interface and replace it with something more flexible.
 # At the moment a best effort is made.
@@ -1059,7 +1059,7 @@ function partition_disk	#<slice_size> <whole_disk_name>	<total_slices>
 #	dirnum:	    the maximum number of subdirectories to use, -1 no limit
 #	filenum:    the maximum number of files per subdirectory
 #	bytes:	    number of bytes to write
-#	num_writes: numer of types to write out bytes
+#	num_writes: number of types to write out bytes
 #	data:	    the data that will be written
 #
 #	E.g.
@@ -2846,7 +2846,7 @@ function labelvtoc
 
 #
 # check if the system was installed as zfsroot or not
-# return: 0 ture, otherwise false
+# return: 0 if zfsroot, non-zero if not
 #
 function is_zfsroot
 {

tests/zfs-tests/tests/functional/acl/acl_common.kshlib

@@ -34,7 +34,7 @@
 #
 # Get the given file/directory access mode
 #
-# $1 object -- file or directroy
+# $1 object -- file or directory
 #
 function get_mode #<obj>
 {
@@ -49,7 +49,7 @@ function get_mode #<obj>
 #
 # Get the given file/directory ACL
 #
-# $1 object -- file or directroy
+# $1 object -- file or directory
 #
 function get_acl #<obj>
 {
@@ -64,7 +64,7 @@ function get_acl #<obj>
 #
 # Get the given file/directory ACL
 #
-# $1 object -- file or directroy
+# $1 object -- file or directory
 #
 function get_compact_acl #<obj>
 {
@@ -243,12 +243,12 @@ function usr_exec #<commands> [...]
 #
 # Count how many ACEs for the specified file or directory.
 #
-# $1 file or directroy name
+# $1 file or directory name
 #
 function count_ACE #<file or dir name>
 {
 	if [[ ! -e $1 ]]; then
-		log_note "Need input file or directroy name."
+		log_note "Need input file or directory name."
 		return 1
 	fi
 
@@ -399,7 +399,7 @@ function rwx_node #user node acl_spec|access
 #
 # Get the given file/directory xattr
 #
-# $1 object -- file or directroy
+# $1 object -- file or directory
 #
 function get_xattr #<obj>
 {

tests/zfs-tests/tests/functional/cachefile/cachefile_004_pos.ksh

@@ -38,9 +38,9 @@
 #	Verify set, export and destroy when cachefile is set on pool.
 #
 # STRATEGY:
-#	1. Create two pools with one same cahcefile1.
+#	1. Create two pools with one same cachefile1.
 #	2. Set cachefile of the two pools to another same cachefile2.
-#	3. Verify cachefile1 not exist.
+#	3. Verify cachefile1 does not exist.
 #	4. Export the two pools.
 #	5. Verify cachefile2 not exist.
 #	6. Import the two pools and set cachefile to cachefile2.

tests/zfs-tests/tests/functional/casenorm/insensitive_formd_lookup.ksh

@@ -19,7 +19,7 @@
 
 # DESCRIPTION:
 # For the filesystem with casesensitivity=insensitive, normalization=formD,
-# check that lookup succeds using any name form.
+# check that lookup succeeds using any name form.
 #
 # STRATEGY:
 # For each c/n name form:

tests/zfs-tests/tests/functional/channel_program/synctask_core/tst.list_user_props.ksh

@@ -95,4 +95,4 @@ log_must_program $TESTPOOL - <<-EOF
 	return 0
 EOF
 
-log_pass "Listing zfs user properies should work correctly."
+log_pass "Listing zfs user properties should work correctly."

tests/zfs-tests/tests/functional/channel_program/synctask_core/tst.terminate_by_signal.ksh

@@ -90,7 +90,7 @@ snap_count=$(zfs list -t snapshot | grep $TESTPOOL | wc -l)
 log_note "$snap_count snapshots created by ZCP"
 
 if [ "$snap_count" -eq 0 ]; then
-	log_fail "Channel progam failed to run."
+	log_fail "Channel program failed to run."
 elif [ "$snap_count" -gt 50 ]; then
 	log_fail "Too many snapshots after a cancel ($snap_count)."
 else

tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_010_pos.ksh

@@ -150,7 +150,7 @@ log_note "Verify zfs clone property for multiple clones"
 names=$(zfs list -rt all -o name $TESTPOOL)
 log_must verify_clones 3 0
 
-log_note "verfify clone property for clone deletion"
+log_note "verify clone property for clone deletion"
 i=1
 for ds in $datasets; do
 	log_must zfs destroy $ds/$TESTCLONE.$i

tests/zfs-tests/tests/functional/cli_root/zfs_copies/zfs_copies_002_pos.ksh

@@ -92,7 +92,7 @@ for val in 1 2 3; do
 	check_used $used $val
 done
 
-log_note "Verify df(1M) can corectly display the space charged."
+log_note "Verify df(1M) can correctly display the space charged."
 for val in 1 2 3; do
 	used=`df -F zfs -k /$TESTPOOL/fs_$val/$FILE | grep $TESTPOOL/fs_$val \
 		| awk '{print $3}'`

tests/zfs-tests/tests/functional/cli_root/zfs_create/zfs_create_011_pos.ksh

@@ -33,7 +33,7 @@
 
 #
 # DESCRIPTION:
-# 'zfs create -p'  should work as expecteed
+# 'zfs create -p'  should work as expected
 #
 # STRATEGY:
 # 1. To create $newdataset with -p option, first make sure the upper level

tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_001_pos.ksh

@@ -53,7 +53,7 @@ verify_runnable "both"
 # run 'zfs destroy $opt <dataset>'. 3rd, check the system status.
 #
 # $1 option of 'zfs destroy'
-# $2 dataset will be destroied.
+# $2 dataset will be destroyed.
 #
 function test_n_check
 {

tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_005_neg.ksh

@@ -145,8 +145,8 @@ if is_global_zone; then
 	check_dataset datasetexists $CTR $VOL
 	check_dataset datasetnonexists $VOLSNAP $VOLCLONE
 
-	# Due to recusive destroy being a best-effort operation,
-	# all of the non-busy datasets bellow should be gone now.
+	# Due to recursive destroy being a best-effort operation,
+	# all of the non-busy datasets below should be gone now.
 	check_dataset datasetnonexists $FS $FSSNAP $FSCLONE
 fi
 

tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_014_pos.ksh

@@ -24,7 +24,7 @@
 #
 # DESCRIPTION:
 #	'zfs destroy -R <snapshot>' can destroy all the child
-#	 snapshots and preserves all the nested datasetss.
+#	 snapshots and preserves all the nested datasets.
 #
 # STRATEGY:
 #	1. Create nested datasets in the storage pool.
@@ -57,7 +57,7 @@ for ds in $datasets; do
 	datasetexists $ds || log_fail "Create $ds dataset fail."
 done
 
-# create recursive nestedd snapshot
+# create recursive nested snapshot
 log_must zfs snapshot -r $TESTPOOL/$TESTFS1@snap
 for ds in $datasets; do
 	datasetexists $ds@snap || log_fail "Create $ds@snap snapshot fail."