mirror_zfs/module/zfs/zfs_ctldir.c

1269 lines
32 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (C) 2011 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* LLNL-CODE-403049.
* Rewritten for Linux by:
* Rohan Puri <rohan.puri15@gmail.com>
* Brian Behlendorf <behlendorf1@llnl.gov>
* Copyright (c) 2013 by Delphix. All rights reserved.
* Copyright 2015, OmniTI Computer Consulting, Inc. All rights reserved.
*/
/*
* ZFS control directory (a.k.a. ".zfs")
*
* This directory provides a common location for all ZFS meta-objects.
* Currently, this is only the 'snapshot' and 'shares' directory, but this may
* expand in the future. The elements are built dynamically, as the hierarchy
* does not actually exist on disk.
*
* For 'snapshot', we don't want to have all snapshots always mounted, because
* this would take up a huge amount of space in /etc/mnttab. We have three
* types of objects:
*
* ctldir ------> snapshotdir -------> snapshot
* |
* |
* V
* mounted fs
*
* The 'snapshot' node contains just enough information to lookup '..' and act
* as a mountpoint for the snapshot. Whenever we lookup a specific snapshot, we
* perform an automount of the underlying filesystem and return the
* corresponding inode.
*
* All mounts are handled automatically by an user mode helper which invokes
* the mount mount procedure. Unmounts are handled by allowing the mount
* point to expire so the kernel may automatically unmount it.
*
* The '.zfs', '.zfs/snapshot', and all directories created under
* '.zfs/snapshot' (ie: '.zfs/snapshot/<snapname>') all share the same
* share the same zfsvfs_t as the head filesystem (what '.zfs' lives under).
*
* File systems mounted on top of the '.zfs/snapshot/<snapname>' paths
* (ie: snapshots) are complete ZFS filesystems and have their own unique
* zfsvfs_t. However, the fsid reported by these mounts will be the same
* as that used by the parent zfsvfs_t to make NFS happy.
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/time.h>
#include <sys/sysmacros.h>
#include <sys/pathname.h>
#include <sys/vfs.h>
#include <sys/zfs_ctldir.h>
#include <sys/zfs_ioctl.h>
#include <sys/zfs_vfsops.h>
#include <sys/zfs_vnops.h>
#include <sys/stat.h>
#include <sys/dmu.h>
#include <sys/dmu_objset.h>
#include <sys/dsl_destroy.h>
#include <sys/dsl_deleg.h>
#include <sys/zpl.h>
#include "zfs_namecheck.h"
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Two AVL trees are maintained which contain all currently automounted
* snapshots. Every automounted snapshots maps to a single zfs_snapentry_t
* entry which MUST:
*
* - be attached to both trees, and
* - be unique, no duplicate entries are allowed.
*
* The zfs_snapshots_by_name tree is indexed by the full dataset name
* while the zfs_snapshots_by_objsetid tree is indexed by the unique
* objsetid. This allows for fast lookups either by name or objsetid.
*/
static avl_tree_t zfs_snapshots_by_name;
static avl_tree_t zfs_snapshots_by_objsetid;
static krwlock_t zfs_snapshot_lock;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Control Directory Tunables (.zfs)
*/
int zfs_expire_snapshot = ZFSCTL_EXPIRE_SNAPSHOT;
int zfs_admin_snapshot = 1;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
typedef struct {
char *se_name; /* full snapshot name */
char *se_path; /* full mount path */
spa_t *se_spa; /* pool spa */
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
uint64_t se_objsetid; /* snapshot objset id */
struct dentry *se_root_dentry; /* snapshot root dentry */
taskqid_t se_taskqid; /* scheduled unmount taskqid */
avl_node_t se_node_name; /* zfs_snapshots_by_name link */
avl_node_t se_node_objsetid; /* zfs_snapshots_by_objsetid link */
zfs_refcount_t se_refcount; /* reference count */
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
} zfs_snapentry_t;
static void zfsctl_snapshot_unmount_delay_impl(zfs_snapentry_t *se, int delay);
/*
* Allocate a new zfs_snapentry_t being careful to make a copy of the
* the snapshot name and provided mount point. No reference is taken.
*/
static zfs_snapentry_t *
zfsctl_snapshot_alloc(char *full_name, char *full_path, spa_t *spa,
uint64_t objsetid, struct dentry *root_dentry)
{
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfs_snapentry_t *se;
se = kmem_zalloc(sizeof (zfs_snapentry_t), KM_SLEEP);
se->se_name = strdup(full_name);
se->se_path = strdup(full_path);
se->se_spa = spa;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
se->se_objsetid = objsetid;
se->se_root_dentry = root_dentry;
se->se_taskqid = TASKQID_INVALID;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
refcount_create(&se->se_refcount);
return (se);
}
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Free a zfs_snapentry_t the called must ensure there are no active
* references.
*/
static void
zfsctl_snapshot_free(zfs_snapentry_t *se)
{
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
refcount_destroy(&se->se_refcount);
strfree(se->se_name);
strfree(se->se_path);
kmem_free(se, sizeof (zfs_snapentry_t));
}
/*
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
* Hold a reference on the zfs_snapentry_t.
*/
static void
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_hold(zfs_snapentry_t *se)
{
zfs_refcount_add(&se->se_refcount, NULL);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
}
/*
* Release a reference on the zfs_snapentry_t. When the number of
* references drops to zero the structure will be freed.
*/
static void
zfsctl_snapshot_rele(zfs_snapentry_t *se)
{
if (refcount_remove(&se->se_refcount, NULL) == 0)
zfsctl_snapshot_free(se);
}
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Add a zfs_snapentry_t to both the zfs_snapshots_by_name and
* zfs_snapshots_by_objsetid trees. While the zfs_snapentry_t is part
* of the trees a reference is held.
*/
static void
zfsctl_snapshot_add(zfs_snapentry_t *se)
{
ASSERT(RW_WRITE_HELD(&zfs_snapshot_lock));
zfs_refcount_add(&se->se_refcount, NULL);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
avl_add(&zfs_snapshots_by_name, se);
avl_add(&zfs_snapshots_by_objsetid, se);
}
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Remove a zfs_snapentry_t from both the zfs_snapshots_by_name and
* zfs_snapshots_by_objsetid trees. Upon removal a reference is dropped,
* this can result in the structure being freed if that was the last
* remaining reference.
*/
static void
zfsctl_snapshot_remove(zfs_snapentry_t *se)
{
ASSERT(RW_WRITE_HELD(&zfs_snapshot_lock));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
avl_remove(&zfs_snapshots_by_name, se);
avl_remove(&zfs_snapshots_by_objsetid, se);
zfsctl_snapshot_rele(se);
}
/*
* Snapshot name comparison function for the zfs_snapshots_by_name.
*/
static int
snapentry_compare_by_name(const void *a, const void *b)
{
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
const zfs_snapentry_t *se_a = a;
const zfs_snapentry_t *se_b = b;
int ret;
ret = strcmp(se_a->se_name, se_b->se_name);
if (ret < 0)
return (-1);
else if (ret > 0)
return (1);
else
return (0);
}
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Snapshot name comparison function for the zfs_snapshots_by_objsetid.
*/
static int
snapentry_compare_by_objsetid(const void *a, const void *b)
{
const zfs_snapentry_t *se_a = a;
const zfs_snapentry_t *se_b = b;
if (se_a->se_spa != se_b->se_spa)
return ((ulong_t)se_a->se_spa < (ulong_t)se_b->se_spa ? -1 : 1);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if (se_a->se_objsetid < se_b->se_objsetid)
return (-1);
else if (se_a->se_objsetid > se_b->se_objsetid)
return (1);
else
return (0);
}
/*
* Find a zfs_snapentry_t in zfs_snapshots_by_name. If the snapname
* is found a pointer to the zfs_snapentry_t is returned and a reference
* taken on the structure. The caller is responsible for dropping the
* reference with zfsctl_snapshot_rele(). If the snapname is not found
* NULL will be returned.
*/
static zfs_snapentry_t *
zfsctl_snapshot_find_by_name(char *snapname)
{
zfs_snapentry_t *se, search;
ASSERT(RW_LOCK_HELD(&zfs_snapshot_lock));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
search.se_name = snapname;
se = avl_find(&zfs_snapshots_by_name, &search, NULL);
if (se)
zfs_refcount_add(&se->se_refcount, NULL);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
return (se);
}
/*
* Find a zfs_snapentry_t in zfs_snapshots_by_objsetid given the objset id
* rather than the snapname. In all other respects it behaves the same
* as zfsctl_snapshot_find_by_name().
*/
static zfs_snapentry_t *
zfsctl_snapshot_find_by_objsetid(spa_t *spa, uint64_t objsetid)
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
{
zfs_snapentry_t *se, search;
ASSERT(RW_LOCK_HELD(&zfs_snapshot_lock));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
search.se_spa = spa;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
search.se_objsetid = objsetid;
se = avl_find(&zfs_snapshots_by_objsetid, &search, NULL);
if (se)
zfs_refcount_add(&se->se_refcount, NULL);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
return (se);
}
/*
* Rename a zfs_snapentry_t in the zfs_snapshots_by_name. The structure is
* removed, renamed, and added back to the new correct location in the tree.
*/
static int
zfsctl_snapshot_rename(char *old_snapname, char *new_snapname)
{
zfs_snapentry_t *se;
ASSERT(RW_WRITE_HELD(&zfs_snapshot_lock));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
se = zfsctl_snapshot_find_by_name(old_snapname);
if (se == NULL)
return (SET_ERROR(ENOENT));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_remove(se);
strfree(se->se_name);
se->se_name = strdup(new_snapname);
zfsctl_snapshot_add(se);
zfsctl_snapshot_rele(se);
return (0);
}
/*
* Delayed task responsible for unmounting an expired automounted snapshot.
*/
static void
snapentry_expire(void *data)
{
zfs_snapentry_t *se = (zfs_snapentry_t *)data;
spa_t *spa = se->se_spa;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
uint64_t objsetid = se->se_objsetid;
if (zfs_expire_snapshot <= 0) {
zfsctl_snapshot_rele(se);
return;
}
se->se_taskqid = TASKQID_INVALID;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
(void) zfsctl_snapshot_unmount(se->se_name, MNT_EXPIRE);
zfsctl_snapshot_rele(se);
/*
* Reschedule the unmount if the zfs_snapentry_t wasn't removed.
* This can occur when the snapshot is busy.
*/
rw_enter(&zfs_snapshot_lock, RW_READER);
if ((se = zfsctl_snapshot_find_by_objsetid(spa, objsetid)) != NULL) {
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_unmount_delay_impl(se, zfs_expire_snapshot);
zfsctl_snapshot_rele(se);
}
rw_exit(&zfs_snapshot_lock);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
}
/*
* Cancel an automatic unmount of a snapname. This callback is responsible
* for dropping the reference on the zfs_snapentry_t which was taken when
* during dispatch.
*/
static void
zfsctl_snapshot_unmount_cancel(zfs_snapentry_t *se)
{
if (taskq_cancel_id(system_delay_taskq, se->se_taskqid) == 0) {
se->se_taskqid = TASKQID_INVALID;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_rele(se);
}
}
/*
* Dispatch the unmount task for delayed handling with a hold protecting it.
*/
static void
zfsctl_snapshot_unmount_delay_impl(zfs_snapentry_t *se, int delay)
{
ASSERT3S(se->se_taskqid, ==, TASKQID_INVALID);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if (delay <= 0)
return;
zfsctl_snapshot_hold(se);
se->se_taskqid = taskq_dispatch_delay(system_delay_taskq,
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
snapentry_expire, se, TQ_SLEEP, ddi_get_lbolt() + delay * HZ);
}
/*
* Schedule an automatic unmount of objset id to occur in delay seconds from
* now. Any previous delayed unmount will be cancelled in favor of the
* updated deadline. A reference is taken by zfsctl_snapshot_find_by_name()
* and held until the outstanding task is handled or cancelled.
*/
int
zfsctl_snapshot_unmount_delay(spa_t *spa, uint64_t objsetid, int delay)
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
{
zfs_snapentry_t *se;
int error = ENOENT;
rw_enter(&zfs_snapshot_lock, RW_READER);
if ((se = zfsctl_snapshot_find_by_objsetid(spa, objsetid)) != NULL) {
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_unmount_cancel(se);
zfsctl_snapshot_unmount_delay_impl(se, delay);
zfsctl_snapshot_rele(se);
error = 0;
}
rw_exit(&zfs_snapshot_lock);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
return (error);
}
/*
* Check if snapname is currently mounted. Returned non-zero when mounted
* and zero when unmounted.
*/
static boolean_t
zfsctl_snapshot_ismounted(char *snapname)
{
zfs_snapentry_t *se;
boolean_t ismounted = B_FALSE;
rw_enter(&zfs_snapshot_lock, RW_READER);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if ((se = zfsctl_snapshot_find_by_name(snapname)) != NULL) {
zfsctl_snapshot_rele(se);
ismounted = B_TRUE;
}
rw_exit(&zfs_snapshot_lock);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
return (ismounted);
}
/*
* Check if the given inode is a part of the virtual .zfs directory.
*/
boolean_t
zfsctl_is_node(struct inode *ip)
{
return (ITOZ(ip)->z_is_ctldir);
}
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Check if the given inode is a .zfs/snapshots/snapname directory.
*/
boolean_t
zfsctl_is_snapdir(struct inode *ip)
{
return (zfsctl_is_node(ip) && (ip->i_ino <= ZFSCTL_INO_SNAPDIRS));
}
/*
* Allocate a new inode with the passed id and ops.
*/
static struct inode *
zfsctl_inode_alloc(zfsvfs_t *zfsvfs, uint64_t id,
const struct file_operations *fops, const struct inode_operations *ops)
{
inode_timespec_t now;
struct inode *ip;
znode_t *zp;
ip = new_inode(zfsvfs->z_sb);
if (ip == NULL)
return (NULL);
now = current_time(ip);
zp = ITOZ(ip);
ASSERT3P(zp->z_dirlocks, ==, NULL);
ASSERT3P(zp->z_acl_cached, ==, NULL);
ASSERT3P(zp->z_xattr_cached, ==, NULL);
zp->z_id = id;
zp->z_unlinked = 0;
zp->z_atime_dirty = 0;
zp->z_zn_prefetch = 0;
zp->z_moved = 0;
zp->z_sa_hdl = NULL;
zp->z_blksz = 0;
zp->z_seq = 0;
zp->z_mapcnt = 0;
zp->z_size = 0;
zp->z_pflags = 0;
zp->z_mode = 0;
zp->z_sync_cnt = 0;
zp->z_is_mapped = B_FALSE;
zp->z_is_ctldir = B_TRUE;
zp->z_is_sa = B_FALSE;
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zp->z_is_stale = B_FALSE;
ip->i_generation = 0;
ip->i_ino = id;
Add `zfs allow` and `zfs unallow` support ZFS allows for specific permissions to be delegated to normal users with the `zfs allow` and `zfs unallow` commands. In addition, non- privileged users should be able to run all of the following commands: * zpool [list | iostat | status | get] * zfs [list | get] Historically this functionality was not available on Linux. In order to add it the secpolicy_* functions needed to be implemented and mapped to the equivalent Linux capability. Only then could the permissions on the `/dev/zfs` be relaxed and the internal ZFS permission checks used. Even with this change some limitations remain. Under Linux only the root user is allowed to modify the namespace (unless it's a private namespace). This means the mount, mountpoint, canmount, unmount, and remount delegations cannot be supported with the existing code. It may be possible to add this functionality in the future. This functionality was validated with the cli_user and delegation test cases from the ZFS Test Suite. These tests exhaustively verify each of the supported permissions which can be delegated and ensures only an authorized user can perform it. Two minor bug fixes were required for test-running.py. First, the Timer() object cannot be safely created in a `try:` block when there is an unconditional `finally` block which references it. Second, when running as a normal user also check for scripts using the both the .ksh and .sh suffixes. Finally, existing users who are simulating delegations by setting group permissions on the /dev/zfs device should revert that customization when updating to a version with this change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #362 Closes #434 Closes #4100 Closes #4394 Closes #4410 Closes #4487
2016-06-07 19:16:52 +03:00
ip->i_mode = (S_IFDIR | S_IRWXUGO);
ip->i_uid = SUID_TO_KUID(0);
ip->i_gid = SGID_TO_KGID(0);
ip->i_blkbits = SPA_MINBLOCKSHIFT;
ip->i_atime = now;
ip->i_mtime = now;
ip->i_ctime = now;
ip->i_fop = fops;
ip->i_op = ops;
#if defined(IOP_XATTR)
ip->i_opflags &= ~IOP_XATTR;
#endif
if (insert_inode_locked(ip)) {
unlock_new_inode(ip);
iput(ip);
return (NULL);
}
mutex_enter(&zfsvfs->z_znodes_lock);
list_insert_tail(&zfsvfs->z_all_znodes, zp);
zfsvfs->z_nr_znodes++;
membar_producer();
mutex_exit(&zfsvfs->z_znodes_lock);
unlock_new_inode(ip);
return (ip);
}
/*
* Lookup the inode with given id, it will be allocated if needed.
*/
static struct inode *
zfsctl_inode_lookup(zfsvfs_t *zfsvfs, uint64_t id,
const struct file_operations *fops, const struct inode_operations *ops)
{
struct inode *ip = NULL;
while (ip == NULL) {
ip = ilookup(zfsvfs->z_sb, (unsigned long)id);
if (ip)
break;
/* May fail due to concurrent zfsctl_inode_alloc() */
ip = zfsctl_inode_alloc(zfsvfs, id, fops, ops);
}
return (ip);
}
/*
* Create the '.zfs' directory. This directory is cached as part of the VFS
* structure. This results in a hold on the zfsvfs_t. The code in zfs_umount()
* therefore checks against a vfs_count of 2 instead of 1. This reference
* is removed when the ctldir is destroyed in the unmount. All other entities
* under the '.zfs' directory are created dynamically as needed.
*
* Because the dynamically created '.zfs' directory entries assume the use
* of 64-bit inode numbers this support must be disabled on 32-bit systems.
*/
int
zfsctl_create(zfsvfs_t *zfsvfs)
{
ASSERT(zfsvfs->z_ctldir == NULL);
zfsvfs->z_ctldir = zfsctl_inode_alloc(zfsvfs, ZFSCTL_INO_ROOT,
&zpl_fops_root, &zpl_ops_root);
if (zfsvfs->z_ctldir == NULL)
return (SET_ERROR(ENOENT));
return (0);
}
/*
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
* Destroy the '.zfs' directory or remove a snapshot from zfs_snapshots_by_name.
* Only called when the filesystem is unmounted.
*/
void
zfsctl_destroy(zfsvfs_t *zfsvfs)
{
if (zfsvfs->z_issnap) {
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfs_snapentry_t *se;
spa_t *spa = zfsvfs->z_os->os_spa;
uint64_t objsetid = dmu_objset_id(zfsvfs->z_os);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
rw_enter(&zfs_snapshot_lock, RW_WRITER);
se = zfsctl_snapshot_find_by_objsetid(spa, objsetid);
if (se != NULL)
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_remove(se);
rw_exit(&zfs_snapshot_lock);
if (se != NULL) {
zfsctl_snapshot_unmount_cancel(se);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_rele(se);
}
} else if (zfsvfs->z_ctldir) {
iput(zfsvfs->z_ctldir);
zfsvfs->z_ctldir = NULL;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
}
}
/*
* Given a root znode, retrieve the associated .zfs directory.
* Add a hold to the vnode and return it.
*/
struct inode *
zfsctl_root(znode_t *zp)
{
ASSERT(zfs_has_ctldir(zp));
igrab(ZTOZSB(zp)->z_ctldir);
return (ZTOZSB(zp)->z_ctldir);
}
/*
* Generate a long fid to indicate a snapdir. We encode whether snapdir is
* already monunted in gen field. We do this because nfsd lookup will not
* trigger automount. Next time the nfsd does fh_to_dentry, we will notice
* this and do automount and return ESTALE to force nfsd revalidate and follow
* mount.
*/
static int
zfsctl_snapdir_fid(struct inode *ip, fid_t *fidp)
{
zfid_short_t *zfid = (zfid_short_t *)fidp;
zfid_long_t *zlfid = (zfid_long_t *)fidp;
uint32_t gen = 0;
uint64_t object;
uint64_t objsetid;
int i;
struct dentry *dentry;
if (fidp->fid_len < LONG_FID_LEN) {
fidp->fid_len = LONG_FID_LEN;
return (SET_ERROR(ENOSPC));
}
object = ip->i_ino;
objsetid = ZFSCTL_INO_SNAPDIRS - ip->i_ino;
zfid->zf_len = LONG_FID_LEN;
dentry = d_obtain_alias(igrab(ip));
if (!IS_ERR(dentry)) {
gen = !!d_mountpoint(dentry);
dput(dentry);
}
for (i = 0; i < sizeof (zfid->zf_object); i++)
zfid->zf_object[i] = (uint8_t)(object >> (8 * i));
for (i = 0; i < sizeof (zfid->zf_gen); i++)
zfid->zf_gen[i] = (uint8_t)(gen >> (8 * i));
for (i = 0; i < sizeof (zlfid->zf_setid); i++)
zlfid->zf_setid[i] = (uint8_t)(objsetid >> (8 * i));
for (i = 0; i < sizeof (zlfid->zf_setgen); i++)
zlfid->zf_setgen[i] = 0;
return (0);
}
/*
* Generate an appropriate fid for an entry in the .zfs directory.
*/
int
zfsctl_fid(struct inode *ip, fid_t *fidp)
{
znode_t *zp = ITOZ(ip);
zfsvfs_t *zfsvfs = ITOZSB(ip);
uint64_t object = zp->z_id;
zfid_short_t *zfid;
int i;
ZFS_ENTER(zfsvfs);
if (zfsctl_is_snapdir(ip)) {
ZFS_EXIT(zfsvfs);
return (zfsctl_snapdir_fid(ip, fidp));
}
if (fidp->fid_len < SHORT_FID_LEN) {
fidp->fid_len = SHORT_FID_LEN;
ZFS_EXIT(zfsvfs);
return (SET_ERROR(ENOSPC));
}
zfid = (zfid_short_t *)fidp;
zfid->zf_len = SHORT_FID_LEN;
for (i = 0; i < sizeof (zfid->zf_object); i++)
zfid->zf_object[i] = (uint8_t)(object >> (8 * i));
/* .zfs znodes always have a generation number of 0 */
for (i = 0; i < sizeof (zfid->zf_gen); i++)
zfid->zf_gen[i] = 0;
ZFS_EXIT(zfsvfs);
return (0);
}
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Construct a full dataset name in full_name: "pool/dataset@snap_name"
*/
static int
zfsctl_snapshot_name(zfsvfs_t *zfsvfs, const char *snap_name, int len,
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
char *full_name)
{
objset_t *os = zfsvfs->z_os;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if (zfs_component_namecheck(snap_name, NULL, NULL) != 0)
return (SET_ERROR(EILSEQ));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
dmu_objset_name(os, full_name);
if ((strlen(full_name) + 1 + strlen(snap_name)) >= len)
return (SET_ERROR(ENAMETOOLONG));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
(void) strcat(full_name, "@");
(void) strcat(full_name, snap_name);
return (0);
}
/*
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
* Returns full path in full_path: "/pool/dataset/.zfs/snapshot/snap_name/"
*/
static int
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_path(struct path *path, int len, char *full_path)
{
char *path_buffer, *path_ptr;
int path_len, error = 0;
path_buffer = kmem_alloc(len, KM_SLEEP);
path_ptr = d_path(path, path_buffer, len);
if (IS_ERR(path_ptr)) {
error = -PTR_ERR(path_ptr);
goto out;
}
path_len = path_buffer + len - 1 - path_ptr;
if (path_len > len) {
error = SET_ERROR(EFAULT);
goto out;
}
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
memcpy(full_path, path_ptr, path_len);
full_path[path_len] = '\0';
out:
kmem_free(path_buffer, len);
return (error);
}
/*
* Returns full path in full_path: "/pool/dataset/.zfs/snapshot/snap_name/"
*/
static int
zfsctl_snapshot_path_objset(zfsvfs_t *zfsvfs, uint64_t objsetid,
int path_len, char *full_path)
{
objset_t *os = zfsvfs->z_os;
fstrans_cookie_t cookie;
char *snapname;
boolean_t case_conflict;
uint64_t id, pos = 0;
int error = 0;
if (zfsvfs->z_vfs->vfs_mntpoint == NULL)
return (SET_ERROR(ENOENT));
cookie = spl_fstrans_mark();
snapname = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
while (error == 0) {
dsl_pool_config_enter(dmu_objset_pool(os), FTAG);
error = dmu_snapshot_list_next(zfsvfs->z_os,
ZFS_MAX_DATASET_NAME_LEN, snapname, &id, &pos,
&case_conflict);
dsl_pool_config_exit(dmu_objset_pool(os), FTAG);
if (error)
goto out;
if (id == objsetid)
break;
}
memset(full_path, 0, path_len);
snprintf(full_path, path_len - 1, "%s/.zfs/snapshot/%s",
zfsvfs->z_vfs->vfs_mntpoint, snapname);
out:
kmem_free(snapname, ZFS_MAX_DATASET_NAME_LEN);
spl_fstrans_unmark(cookie);
return (error);
}
/*
* Special case the handling of "..".
*/
int
zfsctl_root_lookup(struct inode *dip, char *name, struct inode **ipp,
int flags, cred_t *cr, int *direntflags, pathname_t *realpnp)
{
zfsvfs_t *zfsvfs = ITOZSB(dip);
int error = 0;
ZFS_ENTER(zfsvfs);
if (strcmp(name, "..") == 0) {
*ipp = dip->i_sb->s_root->d_inode;
} else if (strcmp(name, ZFS_SNAPDIR_NAME) == 0) {
*ipp = zfsctl_inode_lookup(zfsvfs, ZFSCTL_INO_SNAPDIR,
&zpl_fops_snapdir, &zpl_ops_snapdir);
} else if (strcmp(name, ZFS_SHAREDIR_NAME) == 0) {
*ipp = zfsctl_inode_lookup(zfsvfs, ZFSCTL_INO_SHARES,
&zpl_fops_shares, &zpl_ops_shares);
} else {
*ipp = NULL;
}
if (*ipp == NULL)
error = SET_ERROR(ENOENT);
ZFS_EXIT(zfsvfs);
return (error);
}
/*
* Lookup entry point for the 'snapshot' directory. Try to open the
* snapshot if it exist, creating the pseudo filesystem inode as necessary.
* Perform a mount of the associated dataset on top of the inode.
*/
int
zfsctl_snapdir_lookup(struct inode *dip, char *name, struct inode **ipp,
int flags, cred_t *cr, int *direntflags, pathname_t *realpnp)
{
zfsvfs_t *zfsvfs = ITOZSB(dip);
uint64_t id;
int error;
ZFS_ENTER(zfsvfs);
error = dmu_snapshot_lookup(zfsvfs->z_os, name, &id);
if (error) {
ZFS_EXIT(zfsvfs);
return (error);
}
*ipp = zfsctl_inode_lookup(zfsvfs, ZFSCTL_INO_SNAPDIRS - id,
&simple_dir_operations, &simple_dir_inode_operations);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if (*ipp == NULL)
error = SET_ERROR(ENOENT);
ZFS_EXIT(zfsvfs);
return (error);
}
/*
* Renaming a directory under '.zfs/snapshot' will automatically trigger
* a rename of the snapshot to the new given name. The rename is confined
* to the '.zfs/snapshot' directory snapshots cannot be moved elsewhere.
*/
int
zfsctl_snapdir_rename(struct inode *sdip, char *snm,
struct inode *tdip, char *tnm, cred_t *cr, int flags)
{
zfsvfs_t *zfsvfs = ITOZSB(sdip);
char *to, *from, *real, *fsname;
int error;
if (!zfs_admin_snapshot)
return (SET_ERROR(EACCES));
ZFS_ENTER(zfsvfs);
to = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
from = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
real = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
fsname = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
if (zfsvfs->z_case == ZFS_CASE_INSENSITIVE) {
error = dmu_snapshot_realname(zfsvfs->z_os, snm, real,
ZFS_MAX_DATASET_NAME_LEN, NULL);
if (error == 0) {
snm = real;
} else if (error != ENOTSUP) {
goto out;
}
}
dmu_objset_name(zfsvfs->z_os, fsname);
error = zfsctl_snapshot_name(ITOZSB(sdip), snm,
ZFS_MAX_DATASET_NAME_LEN, from);
if (error == 0)
error = zfsctl_snapshot_name(ITOZSB(tdip), tnm,
ZFS_MAX_DATASET_NAME_LEN, to);
if (error == 0)
error = zfs_secpolicy_rename_perms(from, to, cr);
if (error != 0)
goto out;
/*
* Cannot move snapshots out of the snapdir.
*/
if (sdip != tdip) {
error = SET_ERROR(EINVAL);
goto out;
}
/*
* No-op when names are identical.
*/
if (strcmp(snm, tnm) == 0) {
error = 0;
goto out;
}
rw_enter(&zfs_snapshot_lock, RW_WRITER);
error = dsl_dataset_rename_snapshot(fsname, snm, tnm, B_FALSE);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if (error == 0)
(void) zfsctl_snapshot_rename(snm, tnm);
rw_exit(&zfs_snapshot_lock);
out:
kmem_free(from, ZFS_MAX_DATASET_NAME_LEN);
kmem_free(to, ZFS_MAX_DATASET_NAME_LEN);
kmem_free(real, ZFS_MAX_DATASET_NAME_LEN);
kmem_free(fsname, ZFS_MAX_DATASET_NAME_LEN);
ZFS_EXIT(zfsvfs);
return (error);
}
/*
* Removing a directory under '.zfs/snapshot' will automatically trigger
* the removal of the snapshot with the given name.
*/
int
zfsctl_snapdir_remove(struct inode *dip, char *name, cred_t *cr, int flags)
{
zfsvfs_t *zfsvfs = ITOZSB(dip);
char *snapname, *real;
int error;
if (!zfs_admin_snapshot)
return (SET_ERROR(EACCES));
ZFS_ENTER(zfsvfs);
snapname = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
real = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
if (zfsvfs->z_case == ZFS_CASE_INSENSITIVE) {
error = dmu_snapshot_realname(zfsvfs->z_os, name, real,
ZFS_MAX_DATASET_NAME_LEN, NULL);
if (error == 0) {
name = real;
} else if (error != ENOTSUP) {
goto out;
}
}
error = zfsctl_snapshot_name(ITOZSB(dip), name,
ZFS_MAX_DATASET_NAME_LEN, snapname);
if (error == 0)
error = zfs_secpolicy_destroy_perms(snapname, cr);
if (error != 0)
goto out;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
error = zfsctl_snapshot_unmount(snapname, MNT_FORCE);
if ((error == 0) || (error == ENOENT))
error = dsl_destroy_snapshot(snapname, B_FALSE);
out:
kmem_free(snapname, ZFS_MAX_DATASET_NAME_LEN);
kmem_free(real, ZFS_MAX_DATASET_NAME_LEN);
ZFS_EXIT(zfsvfs);
return (error);
}
/*
* Creating a directory under '.zfs/snapshot' will automatically trigger
* the creation of a new snapshot with the given name.
*/
int
zfsctl_snapdir_mkdir(struct inode *dip, char *dirname, vattr_t *vap,
struct inode **ipp, cred_t *cr, int flags)
{
zfsvfs_t *zfsvfs = ITOZSB(dip);
char *dsname;
int error;
if (!zfs_admin_snapshot)
return (SET_ERROR(EACCES));
dsname = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
if (zfs_component_namecheck(dirname, NULL, NULL) != 0) {
error = SET_ERROR(EILSEQ);
goto out;
}
dmu_objset_name(zfsvfs->z_os, dsname);
error = zfs_secpolicy_snapshot_perms(dsname, cr);
if (error != 0)
goto out;
if (error == 0) {
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
error = dmu_objset_snapshot_one(dsname, dirname);
if (error != 0)
goto out;
error = zfsctl_snapdir_lookup(dip, dirname, ipp,
0, cr, NULL, NULL);
}
out:
kmem_free(dsname, ZFS_MAX_DATASET_NAME_LEN);
return (error);
}
/*
* Attempt to unmount a snapshot by making a call to user space.
* There is no assurance that this can or will succeed, is just a
* best effort. In the case where it does fail, perhaps because
* it's in use, the unmount will fail harmlessly.
*/
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
int
zfsctl_snapshot_unmount(char *snapname, int flags)
{
char *argv[] = { "/usr/bin/env", "umount", "-t", "zfs", "-n", NULL,
NULL };
char *envp[] = { NULL };
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfs_snapentry_t *se;
int error;
rw_enter(&zfs_snapshot_lock, RW_READER);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if ((se = zfsctl_snapshot_find_by_name(snapname)) == NULL) {
rw_exit(&zfs_snapshot_lock);
return (SET_ERROR(ENOENT));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
}
rw_exit(&zfs_snapshot_lock);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if (flags & MNT_FORCE)
argv[4] = "-fn";
argv[5] = se->se_path;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
dprintf("unmount; path=%s\n", se->se_path);
error = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
zfsctl_snapshot_rele(se);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* The umount system utility will return 256 on error. We must
* assume this error is because the file system is busy so it is
* converted to the more sensible EBUSY.
*/
if (error)
error = SET_ERROR(EBUSY);
return (error);
}
#define MOUNT_BUSY 0x80 /* Mount failed due to EBUSY (from mntent.h) */
int
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_snapshot_mount(struct path *path, int flags)
{
struct dentry *dentry = path->dentry;
struct inode *ip = dentry->d_inode;
zfsvfs_t *zfsvfs;
zfsvfs_t *snap_zfsvfs;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfs_snapentry_t *se;
char *full_name, *full_path;
char *argv[] = { "/usr/bin/env", "mount", "-t", "zfs", "-n", NULL, NULL,
NULL };
char *envp[] = { NULL };
int error;
struct path spath;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
if (ip == NULL)
return (SET_ERROR(EISDIR));
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsvfs = ITOZSB(ip);
ZFS_ENTER(zfsvfs);
full_name = kmem_zalloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
full_path = kmem_zalloc(MAXPATHLEN, KM_SLEEP);
error = zfsctl_snapshot_name(zfsvfs, dname(dentry),
ZFS_MAX_DATASET_NAME_LEN, full_name);
if (error)
goto error;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
error = zfsctl_snapshot_path(path, MAXPATHLEN, full_path);
if (error)
goto error;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
/*
* Multiple concurrent automounts of a snapshot are never allowed.
* The snapshot may be manually mounted as many times as desired.
*/
if (zfsctl_snapshot_ismounted(full_name)) {
error = 0;
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
goto error;
}
/*
* Attempt to mount the snapshot from user space. Normally this
* would be done using the vfs_kern_mount() function, however that
* function is marked GPL-only and cannot be used. On error we
* careful to log the real error to the console and return EISDIR
* to safely abort the automount. This should be very rare.
*
* If the user mode helper happens to return EBUSY, a concurrent
* mount is already in progress in which case the error is ignored.
* Take note that if the program was executed successfully the return
* value from call_usermodehelper() will be (exitcode << 8 + signal).
*/
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
dprintf("mount; name=%s path=%s\n", full_name, full_path);
argv[5] = full_name;
argv[6] = full_path;
error = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
if (error) {
if (!(error & MOUNT_BUSY << 8)) {
cmn_err(CE_WARN, "Unable to automount %s/%s: %d",
full_path, full_name, error);
error = SET_ERROR(EISDIR);
} else {
/*
* EBUSY, this could mean a concurrent mount, or the
* snapshot has already been mounted at completely
* different place. We return 0 so VFS will retry. For
* the latter case the VFS will retry several times
* and return ELOOP, which is probably not a very good
* behavior.
*/
error = 0;
}
goto error;
}
/*
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
* Follow down in to the mounted snapshot and set MNT_SHRINKABLE
* to identify this as an automounted filesystem.
*/
spath = *path;
path_get(&spath);
if (zpl_follow_down_one(&spath)) {
snap_zfsvfs = ITOZSB(spath.dentry->d_inode);
snap_zfsvfs->z_parent = zfsvfs;
dentry = spath.dentry;
spath.mnt->mnt_flags |= MNT_SHRINKABLE;
rw_enter(&zfs_snapshot_lock, RW_WRITER);
se = zfsctl_snapshot_alloc(full_name, full_path,
snap_zfsvfs->z_os->os_spa, dmu_objset_id(snap_zfsvfs->z_os),
dentry);
zfsctl_snapshot_add(se);
zfsctl_snapshot_unmount_delay_impl(se, zfs_expire_snapshot);
rw_exit(&zfs_snapshot_lock);
}
path_put(&spath);
error:
kmem_free(full_name, ZFS_MAX_DATASET_NAME_LEN);
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
kmem_free(full_path, MAXPATHLEN);
ZFS_EXIT(zfsvfs);
return (error);
}
/*
* Get the snapdir inode from fid
*/
int
zfsctl_snapdir_vget(struct super_block *sb, uint64_t objsetid, int gen,
struct inode **ipp)
{
int error;
struct path path;
char *mnt;
struct dentry *dentry;
mnt = kmem_alloc(MAXPATHLEN, KM_SLEEP);
error = zfsctl_snapshot_path_objset(sb->s_fs_info, objsetid,
MAXPATHLEN, mnt);
if (error)
goto out;
/* Trigger automount */
error = -kern_path(mnt, LOOKUP_FOLLOW|LOOKUP_DIRECTORY, &path);
if (error)
goto out;
path_put(&path);
/*
* Get the snapdir inode. Note, we don't want to use the above
* path because it contains the root of the snapshot rather
* than the snapdir.
*/
*ipp = ilookup(sb, ZFSCTL_INO_SNAPDIRS - objsetid);
if (*ipp == NULL) {
error = SET_ERROR(ENOENT);
goto out;
}
/* check gen, see zfsctl_snapdir_fid */
dentry = d_obtain_alias(igrab(*ipp));
if (gen != (!IS_ERR(dentry) && d_mountpoint(dentry))) {
iput(*ipp);
*ipp = NULL;
error = SET_ERROR(ENOENT);
}
if (!IS_ERR(dentry))
dput(dentry);
out:
kmem_free(mnt, MAXPATHLEN);
return (error);
}
int
zfsctl_shares_lookup(struct inode *dip, char *name, struct inode **ipp,
int flags, cred_t *cr, int *direntflags, pathname_t *realpnp)
{
zfsvfs_t *zfsvfs = ITOZSB(dip);
struct inode *ip;
znode_t *dzp;
int error;
ZFS_ENTER(zfsvfs);
if (zfsvfs->z_shares_dir == 0) {
ZFS_EXIT(zfsvfs);
return (SET_ERROR(ENOTSUP));
}
if ((error = zfs_zget(zfsvfs, zfsvfs->z_shares_dir, &dzp)) == 0) {
error = zfs_lookup(ZTOI(dzp), name, &ip, 0, cr, NULL, NULL);
iput(ZTOI(dzp));
}
ZFS_EXIT(zfsvfs);
return (error);
}
/*
* Initialize the various pieces we'll need to create and manipulate .zfs
* directories. Currently this is unused but available.
*/
void
zfsctl_init(void)
{
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
avl_create(&zfs_snapshots_by_name, snapentry_compare_by_name,
sizeof (zfs_snapentry_t), offsetof(zfs_snapentry_t,
se_node_name));
avl_create(&zfs_snapshots_by_objsetid, snapentry_compare_by_objsetid,
sizeof (zfs_snapentry_t), offsetof(zfs_snapentry_t,
se_node_objsetid));
rw_init(&zfs_snapshot_lock, NULL, RW_DEFAULT, NULL);
}
/*
* Cleanup the various pieces we needed for .zfs directories. In particular
* ensure the expiry timer is canceled safely.
*/
void
zfsctl_fini(void)
{
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
avl_destroy(&zfs_snapshots_by_name);
avl_destroy(&zfs_snapshots_by_objsetid);
rw_destroy(&zfs_snapshot_lock);
}
module_param(zfs_admin_snapshot, int, 0644);
MODULE_PARM_DESC(zfs_admin_snapshot, "Enable mkdir/rmdir/mv in .zfs/snapshot");
module_param(zfs_expire_snapshot, int, 0644);
MODULE_PARM_DESC(zfs_expire_snapshot, "Seconds to expire .zfs/snapshot");