mirror_zfs/module/zfs/dsl_scan.c

2135 lines
62 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2016 by Delphix. All rights reserved.
* Copyright 2016 Gary Mills
* Copyright (c) 2017 Datto Inc.
* Copyright 2017 Joyent, Inc.
*/
#include <sys/dsl_scan.h>
#include <sys/dsl_pool.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_prop.h>
#include <sys/dsl_dir.h>
#include <sys/dsl_synctask.h>
#include <sys/dnode.h>
#include <sys/dmu_tx.h>
#include <sys/dmu_objset.h>
#include <sys/arc.h>
#include <sys/zap.h>
#include <sys/zio.h>
#include <sys/zfs_context.h>
#include <sys/fs/zfs.h>
#include <sys/zfs_znode.h>
#include <sys/spa_impl.h>
#include <sys/vdev_impl.h>
#include <sys/zil_impl.h>
#include <sys/zio_checksum.h>
#include <sys/ddt.h>
#include <sys/sa.h>
#include <sys/sa_impl.h>
#include <sys/zfeature.h>
#include <sys/abd.h>
#ifdef _KERNEL
#include <sys/zfs_vfsops.h>
#endif
typedef int (scan_cb_t)(dsl_pool_t *, const blkptr_t *,
const zbookmark_phys_t *);
static scan_cb_t dsl_scan_scrub_cb;
static void dsl_scan_cancel_sync(void *, dmu_tx_t *);
static void dsl_scan_sync_state(dsl_scan_t *, dmu_tx_t *);
static boolean_t dsl_scan_restarting(dsl_scan_t *, dmu_tx_t *);
int zfs_top_maxinflight = 32; /* maximum I/Os per top-level */
int zfs_resilver_delay = 2; /* number of ticks to delay resilver */
int zfs_scrub_delay = 4; /* number of ticks to delay scrub */
int zfs_scan_idle = 50; /* idle window in clock ticks */
int zfs_scan_min_time_ms = 1000; /* min millisecs to scrub per txg */
int zfs_free_min_time_ms = 1000; /* min millisecs to free per txg */
int zfs_resilver_min_time_ms = 3000; /* min millisecs to resilver per txg */
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
int zfs_no_scrub_io = B_FALSE; /* set to disable scrub i/o */
int zfs_no_scrub_prefetch = B_FALSE; /* set to disable scrub prefetch */
enum ddt_class zfs_scrub_ddt_class_max = DDT_CLASS_DUPLICATE;
int dsl_scan_delay_completion = B_FALSE; /* set to delay scan completion */
/* max number of blocks to free in a single TXG */
unsigned long zfs_free_max_blocks = 100000;
#define DSL_SCAN_IS_SCRUB_RESILVER(scn) \
((scn)->scn_phys.scn_func == POOL_SCAN_SCRUB || \
(scn)->scn_phys.scn_func == POOL_SCAN_RESILVER)
/*
* Enable/disable the processing of the free_bpobj object.
*/
int zfs_free_bpobj_enabled = 1;
/* the order has to match pool_scan_type */
static scan_cb_t *scan_funcs[POOL_SCAN_FUNCS] = {
NULL,
dsl_scan_scrub_cb, /* POOL_SCAN_SCRUB */
dsl_scan_scrub_cb, /* POOL_SCAN_RESILVER */
};
int
dsl_scan_init(dsl_pool_t *dp, uint64_t txg)
{
int err;
dsl_scan_t *scn;
spa_t *spa = dp->dp_spa;
uint64_t f;
scn = dp->dp_scan = kmem_zalloc(sizeof (dsl_scan_t), KM_SLEEP);
scn->scn_dp = dp;
/*
* It's possible that we're resuming a scan after a reboot so
* make sure that the scan_async_destroying flag is initialized
* appropriately.
*/
ASSERT(!scn->scn_async_destroying);
scn->scn_async_destroying = spa_feature_is_active(dp->dp_spa,
SPA_FEATURE_ASYNC_DESTROY);
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
"scrub_func", sizeof (uint64_t), 1, &f);
if (err == 0) {
/*
* There was an old-style scrub in progress. Restart a
* new-style scrub from the beginning.
*/
scn->scn_restart_txg = txg;
zfs_dbgmsg("old-style scrub was in progress; "
"restarting new-style scrub in txg %llu",
scn->scn_restart_txg);
/*
* Load the queue obj from the old location so that it
* can be freed by dsl_scan_done().
*/
(void) zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
"scrub_queue", sizeof (uint64_t), 1,
&scn->scn_phys.scn_queue_obj);
} else {
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_SCAN, sizeof (uint64_t), SCAN_PHYS_NUMINTS,
&scn->scn_phys);
Add erratum for issue #2094 ZoL commit 1421c89 unintentionally changed the disk format in a forward- compatible, but not backward compatible way. This was accomplished by adding an entry to zbookmark_t, which is included in a couple of on-disk structures. That lead to the creation of pools with incorrect dsl_scan_phys_t objects that could only be imported by versions of ZoL containing that commit. Such pools cannot be imported by other versions of ZFS or past versions of ZoL. The additional field has been removed by the previous commit. However, affected pools must be imported and scrubbed using a version of ZoL with this commit applied. This will return the pools to a state in which they may be imported by other implementations. The 'zpool import' or 'zpool status' command can be used to determine if a pool is impacted. A message similar to one of the following means your pool must be scrubbed to restore compatibility. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #1 detected. action: The pool can be imported using its name or numeric identifier, however there is a compatibility issue which should be corrected by running 'zpool scrub' see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... $ zpool status pool: zol-0.6.2-173 state: ONLINE scan: pool compatibility issue detected. see: https://github.com/zfsonlinux/zfs/issues/2094 action: To correct the issue run 'zpool scrub'. config: ... If there was an async destroy in progress 'zpool import' will prevent the pool from being imported. Further advice on how to proceed will be provided by the error message as follows. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #2 detected. action: The pool can not be imported with this version of ZFS due to an active asynchronous destroy. Revert to an earlier version and allow the destroy to complete before updating. see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... Pools affected by the damaged dsl_scan_phys_t can be detected prior to an upgrade by running the following command as root: zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w Note that `poolname` must be replaced with the name of the pool you wish to check. A value of 25 indicates the dsl_scan_phys_t has been damaged. A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0 indicates that there has never been a scrub run on the pool. The regression caused by the change to zbookmark_t never made it into a tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL stable respositorys. Only those using the HEAD version directly from Github after the 0.6.2 but before the 0.6.3 tag are affected. This patch does have one limitation that should be mentioned. It will not detect errata #2 on a pool unless errata #1 is also present. It expected this will not be a significant problem because pools impacted by errata #2 have a high probably of being impacted by errata #1. End users can ensure they do no hit this unlikely case by waiting for all asynchronous destroy operations to complete before updating ZoL. The presence of any background destroys on any imported pools can be checked by running `zpool get freeing` as root. This will display a non-zero value for any pool with an active asynchronous destroy. Lastly, it is expected that no user data has been lost as a result of this erratum. Original-patch-by: Tim Chase <tim@chase2k.com> Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2094
2014-02-21 08:28:33 +04:00
/*
* Detect if the pool contains the signature of #2094. If it
* does properly update the scn->scn_phys structure and notify
* the administrator by setting an errata for the pool.
*/
if (err == EOVERFLOW) {
uint64_t zaptmp[SCAN_PHYS_NUMINTS + 1];
VERIFY3S(SCAN_PHYS_NUMINTS, ==, 24);
VERIFY3S(offsetof(dsl_scan_phys_t, scn_flags), ==,
(23 * sizeof (uint64_t)));
err = zap_lookup(dp->dp_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_SCAN,
sizeof (uint64_t), SCAN_PHYS_NUMINTS + 1, &zaptmp);
if (err == 0) {
uint64_t overflow = zaptmp[SCAN_PHYS_NUMINTS];
if (overflow & ~DSL_SCAN_FLAGS_MASK ||
scn->scn_async_destroying) {
spa->spa_errata =
ZPOOL_ERRATA_ZOL_2094_ASYNC_DESTROY;
return (EOVERFLOW);
}
bcopy(zaptmp, &scn->scn_phys,
SCAN_PHYS_NUMINTS * sizeof (uint64_t));
scn->scn_phys.scn_flags = overflow;
/* Required scrub already in progress. */
if (scn->scn_phys.scn_state == DSS_FINISHED ||
scn->scn_phys.scn_state == DSS_CANCELED)
spa->spa_errata =
ZPOOL_ERRATA_ZOL_2094_SCRUB;
}
}
if (err == ENOENT)
return (0);
else if (err)
return (err);
if (scn->scn_phys.scn_state == DSS_SCANNING &&
spa_prev_software_version(dp->dp_spa) < SPA_VERSION_SCAN) {
/*
* A new-type scrub was in progress on an old
* pool, and the pool was accessed by old
* software. Restart from the beginning, since
* the old software may have changed the pool in
* the meantime.
*/
scn->scn_restart_txg = txg;
zfs_dbgmsg("new-style scrub was modified "
"by old software; restarting in txg %llu",
scn->scn_restart_txg);
}
}
spa_scan_stat_init(spa);
return (0);
}
void
dsl_scan_fini(dsl_pool_t *dp)
{
if (dp->dp_scan) {
kmem_free(dp->dp_scan, sizeof (dsl_scan_t));
dp->dp_scan = NULL;
}
}
/* ARGSUSED */
static int
dsl_scan_setup_check(void *arg, dmu_tx_t *tx)
{
dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
if (scn->scn_phys.scn_state == DSS_SCANNING)
return (SET_ERROR(EBUSY));
return (0);
}
static void
dsl_scan_setup_sync(void *arg, dmu_tx_t *tx)
{
dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
pool_scan_func_t *funcp = arg;
dmu_object_type_t ot = 0;
dsl_pool_t *dp = scn->scn_dp;
spa_t *spa = dp->dp_spa;
ASSERT(scn->scn_phys.scn_state != DSS_SCANNING);
ASSERT(*funcp > POOL_SCAN_NONE && *funcp < POOL_SCAN_FUNCS);
bzero(&scn->scn_phys, sizeof (scn->scn_phys));
scn->scn_phys.scn_func = *funcp;
scn->scn_phys.scn_state = DSS_SCANNING;
scn->scn_phys.scn_min_txg = 0;
scn->scn_phys.scn_max_txg = tx->tx_txg;
scn->scn_phys.scn_ddt_class_max = DDT_CLASSES - 1; /* the entire DDT */
scn->scn_phys.scn_start_time = gethrestime_sec();
scn->scn_phys.scn_errors = 0;
scn->scn_phys.scn_to_examine = spa->spa_root_vdev->vdev_stat.vs_alloc;
scn->scn_restart_txg = 0;
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
scn->scn_done_txg = 0;
spa_scan_stat_init(spa);
if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) {
scn->scn_phys.scn_ddt_class_max = zfs_scrub_ddt_class_max;
/* rewrite all disk labels */
vdev_config_dirty(spa->spa_root_vdev);
if (vdev_resilver_needed(spa->spa_root_vdev,
&scn->scn_phys.scn_min_txg, &scn->scn_phys.scn_max_txg)) {
spa_event_notify(spa, NULL, NULL,
ESC_ZFS_RESILVER_START);
} else {
spa_event_notify(spa, NULL, NULL, ESC_ZFS_SCRUB_START);
}
spa->spa_scrub_started = B_TRUE;
/*
* If this is an incremental scrub, limit the DDT scrub phase
* to just the auto-ditto class (for correctness); the rest
* of the scrub should go faster using top-down pruning.
*/
if (scn->scn_phys.scn_min_txg > TXG_INITIAL)
scn->scn_phys.scn_ddt_class_max = DDT_CLASS_DITTO;
}
/* back to the generic stuff */
if (dp->dp_blkstats == NULL) {
dp->dp_blkstats =
vmem_alloc(sizeof (zfs_all_blkstats_t), KM_SLEEP);
}
bzero(dp->dp_blkstats, sizeof (zfs_all_blkstats_t));
if (spa_version(spa) < SPA_VERSION_DSL_SCRUB)
ot = DMU_OT_ZAP_OTHER;
scn->scn_phys.scn_queue_obj = zap_create(dp->dp_meta_objset,
ot ? ot : DMU_OT_SCAN_QUEUE, DMU_OT_NONE, 0, tx);
dsl_scan_sync_state(scn, tx);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
spa_history_log_internal(spa, "scan setup", tx,
"func=%u mintxg=%llu maxtxg=%llu",
*funcp, scn->scn_phys.scn_min_txg, scn->scn_phys.scn_max_txg);
}
/* ARGSUSED */
static void
dsl_scan_done(dsl_scan_t *scn, boolean_t complete, dmu_tx_t *tx)
{
static const char *old_names[] = {
"scrub_bookmark",
"scrub_ddt_bookmark",
"scrub_ddt_class_max",
"scrub_queue",
"scrub_min_txg",
"scrub_max_txg",
"scrub_func",
"scrub_errors",
NULL
};
dsl_pool_t *dp = scn->scn_dp;
spa_t *spa = dp->dp_spa;
int i;
/* Remove any remnants of an old-style scrub. */
for (i = 0; old_names[i]; i++) {
(void) zap_remove(dp->dp_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, old_names[i], tx);
}
if (scn->scn_phys.scn_queue_obj != 0) {
VERIFY(0 == dmu_object_free(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, tx));
scn->scn_phys.scn_queue_obj = 0;
}
scn->scn_phys.scn_flags &= ~DSF_SCRUB_PAUSED;
/*
* If we were "restarted" from a stopped state, don't bother
* with anything else.
*/
if (scn->scn_phys.scn_state != DSS_SCANNING)
return;
if (complete)
scn->scn_phys.scn_state = DSS_FINISHED;
else
scn->scn_phys.scn_state = DSS_CANCELED;
if (dsl_scan_restarting(scn, tx))
spa_history_log_internal(spa, "scan aborted, restarting", tx,
"errors=%llu", spa_get_errlog_size(spa));
else if (!complete)
spa_history_log_internal(spa, "scan cancelled", tx,
"errors=%llu", spa_get_errlog_size(spa));
else
spa_history_log_internal(spa, "scan done", tx,
"errors=%llu", spa_get_errlog_size(spa));
if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) {
mutex_enter(&spa->spa_scrub_lock);
while (spa->spa_scrub_inflight > 0) {
cv_wait(&spa->spa_scrub_io_cv,
&spa->spa_scrub_lock);
}
mutex_exit(&spa->spa_scrub_lock);
spa->spa_scrub_started = B_FALSE;
spa->spa_scrub_active = B_FALSE;
/*
* If the scrub/resilver completed, update all DTLs to
* reflect this. Whether it succeeded or not, vacate
* all temporary scrub DTLs.
*/
vdev_dtl_reassess(spa->spa_root_vdev, tx->tx_txg,
complete ? scn->scn_phys.scn_max_txg : 0, B_TRUE);
if (complete) {
spa_event_notify(spa, NULL, NULL,
scn->scn_phys.scn_min_txg ?
OpenZFS 5997 - FRU field not set during pool creation and never updated Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com> Reviewed by: Dan Fields <dan.fields@nexenta.com> Reviewed by: Josef Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Signed-off-by: Don Brady <don.brady@intel.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/5997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283 Porting Notes: In addition to the OpenZFS changes this patch realigns the events with those found in OpenZFS. Events which would be logged as sysevents on illumos have been been mapped to the 'sysevent' class for Linux. In addition, several subclass names have been changed to match what is used in OpenZFS. In all cases this means a '.' was changed to an '_' in the subclass. The scripts provided by ZoL have been updated, however users which provide scripts for any of the following events will need to rename them based on the new subclass names. ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
2016-07-28 01:29:15 +03:00
ESC_ZFS_RESILVER_FINISH : ESC_ZFS_SCRUB_FINISH);
}
spa_errlog_rotate(spa);
/*
* We may have finished replacing a device.
* Let the async thread assess this and handle the detach.
*/
spa_async_request(spa, SPA_ASYNC_RESILVER_DONE);
}
scn->scn_phys.scn_end_time = gethrestime_sec();
Add erratum for issue #2094 ZoL commit 1421c89 unintentionally changed the disk format in a forward- compatible, but not backward compatible way. This was accomplished by adding an entry to zbookmark_t, which is included in a couple of on-disk structures. That lead to the creation of pools with incorrect dsl_scan_phys_t objects that could only be imported by versions of ZoL containing that commit. Such pools cannot be imported by other versions of ZFS or past versions of ZoL. The additional field has been removed by the previous commit. However, affected pools must be imported and scrubbed using a version of ZoL with this commit applied. This will return the pools to a state in which they may be imported by other implementations. The 'zpool import' or 'zpool status' command can be used to determine if a pool is impacted. A message similar to one of the following means your pool must be scrubbed to restore compatibility. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #1 detected. action: The pool can be imported using its name or numeric identifier, however there is a compatibility issue which should be corrected by running 'zpool scrub' see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... $ zpool status pool: zol-0.6.2-173 state: ONLINE scan: pool compatibility issue detected. see: https://github.com/zfsonlinux/zfs/issues/2094 action: To correct the issue run 'zpool scrub'. config: ... If there was an async destroy in progress 'zpool import' will prevent the pool from being imported. Further advice on how to proceed will be provided by the error message as follows. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #2 detected. action: The pool can not be imported with this version of ZFS due to an active asynchronous destroy. Revert to an earlier version and allow the destroy to complete before updating. see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... Pools affected by the damaged dsl_scan_phys_t can be detected prior to an upgrade by running the following command as root: zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w Note that `poolname` must be replaced with the name of the pool you wish to check. A value of 25 indicates the dsl_scan_phys_t has been damaged. A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0 indicates that there has never been a scrub run on the pool. The regression caused by the change to zbookmark_t never made it into a tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL stable respositorys. Only those using the HEAD version directly from Github after the 0.6.2 but before the 0.6.3 tag are affected. This patch does have one limitation that should be mentioned. It will not detect errata #2 on a pool unless errata #1 is also present. It expected this will not be a significant problem because pools impacted by errata #2 have a high probably of being impacted by errata #1. End users can ensure they do no hit this unlikely case by waiting for all asynchronous destroy operations to complete before updating ZoL. The presence of any background destroys on any imported pools can be checked by running `zpool get freeing` as root. This will display a non-zero value for any pool with an active asynchronous destroy. Lastly, it is expected that no user data has been lost as a result of this erratum. Original-patch-by: Tim Chase <tim@chase2k.com> Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2094
2014-02-21 08:28:33 +04:00
if (spa->spa_errata == ZPOOL_ERRATA_ZOL_2094_SCRUB)
spa->spa_errata = 0;
}
/* ARGSUSED */
static int
dsl_scan_cancel_check(void *arg, dmu_tx_t *tx)
{
dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
if (scn->scn_phys.scn_state != DSS_SCANNING)
return (SET_ERROR(ENOENT));
return (0);
}
/* ARGSUSED */
static void
dsl_scan_cancel_sync(void *arg, dmu_tx_t *tx)
{
dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
dsl_scan_done(scn, B_FALSE, tx);
dsl_scan_sync_state(scn, tx);
}
int
dsl_scan_cancel(dsl_pool_t *dp)
{
return (dsl_sync_task(spa_name(dp->dp_spa), dsl_scan_cancel_check,
dsl_scan_cancel_sync, NULL, 3, ZFS_SPACE_CHECK_RESERVED));
}
boolean_t
dsl_scan_is_paused_scrub(const dsl_scan_t *scn)
{
if (dsl_scan_scrubbing(scn->scn_dp) &&
scn->scn_phys.scn_flags & DSF_SCRUB_PAUSED)
return (B_TRUE);
return (B_FALSE);
}
static int
dsl_scrub_pause_resume_check(void *arg, dmu_tx_t *tx)
{
pool_scrub_cmd_t *cmd = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
dsl_scan_t *scn = dp->dp_scan;
if (*cmd == POOL_SCRUB_PAUSE) {
/* can't pause a scrub when there is no in-progress scrub */
if (!dsl_scan_scrubbing(dp))
return (SET_ERROR(ENOENT));
/* can't pause a paused scrub */
if (dsl_scan_is_paused_scrub(scn))
return (SET_ERROR(EBUSY));
} else if (*cmd != POOL_SCRUB_NORMAL) {
return (SET_ERROR(ENOTSUP));
}
return (0);
}
static void
dsl_scrub_pause_resume_sync(void *arg, dmu_tx_t *tx)
{
pool_scrub_cmd_t *cmd = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
spa_t *spa = dp->dp_spa;
dsl_scan_t *scn = dp->dp_scan;
if (*cmd == POOL_SCRUB_PAUSE) {
/* can't pause a scrub when there is no in-progress scrub */
spa->spa_scan_pass_scrub_pause = gethrestime_sec();
scn->scn_phys.scn_flags |= DSF_SCRUB_PAUSED;
dsl_scan_sync_state(scn, tx);
} else {
ASSERT3U(*cmd, ==, POOL_SCRUB_NORMAL);
if (dsl_scan_is_paused_scrub(scn)) {
/*
* We need to keep track of how much time we spend
* paused per pass so that we can adjust the scrub rate
* shown in the output of 'zpool status'
*/
spa->spa_scan_pass_scrub_spent_paused +=
gethrestime_sec() - spa->spa_scan_pass_scrub_pause;
spa->spa_scan_pass_scrub_pause = 0;
scn->scn_phys.scn_flags &= ~DSF_SCRUB_PAUSED;
dsl_scan_sync_state(scn, tx);
}
}
}
/*
* Set scrub pause/resume state if it makes sense to do so
*/
int
dsl_scrub_set_pause_resume(const dsl_pool_t *dp, pool_scrub_cmd_t cmd)
{
return (dsl_sync_task(spa_name(dp->dp_spa),
dsl_scrub_pause_resume_check, dsl_scrub_pause_resume_sync, &cmd, 3,
ZFS_SPACE_CHECK_RESERVED));
}
boolean_t
dsl_scan_scrubbing(const dsl_pool_t *dp)
{
dsl_scan_t *scn = dp->dp_scan;
if (scn->scn_phys.scn_state == DSS_SCANNING &&
scn->scn_phys.scn_func == POOL_SCAN_SCRUB)
return (B_TRUE);
return (B_FALSE);
}
static void dsl_scan_visitbp(blkptr_t *bp, const zbookmark_phys_t *zb,
dnode_phys_t *dnp, dsl_dataset_t *ds, dsl_scan_t *scn,
dmu_objset_type_t ostype, dmu_tx_t *tx);
inline __attribute__((always_inline)) static void dsl_scan_visitdnode(
dsl_scan_t *, dsl_dataset_t *ds, dmu_objset_type_t ostype,
dnode_phys_t *dnp, uint64_t object, dmu_tx_t *tx);
void
dsl_free(dsl_pool_t *dp, uint64_t txg, const blkptr_t *bp)
{
zio_free(dp->dp_spa, txg, bp);
}
void
dsl_free_sync(zio_t *pio, dsl_pool_t *dp, uint64_t txg, const blkptr_t *bpp)
{
ASSERT(dsl_pool_sync_context(dp));
zio_nowait(zio_free_sync(pio, dp->dp_spa, txg, bpp, pio->io_flags));
}
static uint64_t
dsl_scan_ds_maxtxg(dsl_dataset_t *ds)
{
uint64_t smt = ds->ds_dir->dd_pool->dp_scan->scn_phys.scn_max_txg;
if (ds->ds_is_snapshot)
return (MIN(smt, dsl_dataset_phys(ds)->ds_creation_txg));
return (smt);
}
static void
dsl_scan_sync_state(dsl_scan_t *scn, dmu_tx_t *tx)
{
VERIFY0(zap_update(scn->scn_dp->dp_meta_objset,
DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_SCAN, sizeof (uint64_t), SCAN_PHYS_NUMINTS,
&scn->scn_phys, tx));
}
extern int zfs_vdev_async_write_active_min_dirty_percent;
static boolean_t
dsl_scan_check_suspend(dsl_scan_t *scn, const zbookmark_phys_t *zb)
{
uint64_t elapsed_nanosecs;
int mintime;
int dirty_pct;
/* we never skip user/group accounting objects */
if (zb && (int64_t)zb->zb_object < 0)
return (B_FALSE);
if (scn->scn_suspending)
return (B_TRUE); /* we're already suspending */
if (!ZB_IS_ZERO(&scn->scn_phys.scn_bookmark))
return (B_FALSE); /* we're resuming */
/* We only know how to resume from level-0 blocks. */
if (zb && zb->zb_level != 0)
return (B_FALSE);
/*
* We suspend if:
* - we have scanned for the maximum time: an entire txg
* timeout (default 5 sec)
* or
* - we have scanned for at least the minimum time (default 1 sec
* for scrub, 3 sec for resilver), and either we have sufficient
* dirty data that we are starting to write more quickly
* (default 30%), or someone is explicitly waiting for this txg
* to complete.
* or
* - the spa is shutting down because this pool is being exported
* or the machine is rebooting.
*/
mintime = (scn->scn_phys.scn_func == POOL_SCAN_RESILVER) ?
zfs_resilver_min_time_ms : zfs_scan_min_time_ms;
elapsed_nanosecs = gethrtime() - scn->scn_sync_start_time;
dirty_pct = scn->scn_dp->dp_dirty_total * 100 / zfs_dirty_data_max;
if (elapsed_nanosecs / NANOSEC >= zfs_txg_timeout ||
(NSEC2MSEC(elapsed_nanosecs) > mintime &&
(txg_sync_waiting(scn->scn_dp) ||
dirty_pct >= zfs_vdev_async_write_active_min_dirty_percent)) ||
spa_shutting_down(scn->scn_dp->dp_spa)) {
if (zb) {
dprintf("suspending at bookmark %llx/%llx/%llx/%llx\n",
(longlong_t)zb->zb_objset,
(longlong_t)zb->zb_object,
(longlong_t)zb->zb_level,
(longlong_t)zb->zb_blkid);
scn->scn_phys.scn_bookmark = *zb;
}
dprintf("suspending at DDT bookmark %llx/%llx/%llx/%llx\n",
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_class,
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_type,
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_checksum,
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_cursor);
scn->scn_suspending = B_TRUE;
return (B_TRUE);
}
return (B_FALSE);
}
typedef struct zil_scan_arg {
dsl_pool_t *zsa_dp;
zil_header_t *zsa_zh;
} zil_scan_arg_t;
/* ARGSUSED */
static int
dsl_scan_zil_block(zilog_t *zilog, blkptr_t *bp, void *arg, uint64_t claim_txg)
{
zil_scan_arg_t *zsa = arg;
dsl_pool_t *dp = zsa->zsa_dp;
dsl_scan_t *scn = dp->dp_scan;
zil_header_t *zh = zsa->zsa_zh;
zbookmark_phys_t zb;
if (BP_IS_HOLE(bp) || bp->blk_birth <= scn->scn_phys.scn_cur_min_txg)
return (0);
/*
* One block ("stubby") can be allocated a long time ago; we
* want to visit that one because it has been allocated
* (on-disk) even if it hasn't been claimed (even though for
* scrub there's nothing to do to it).
*/
if (claim_txg == 0 && bp->blk_birth >= spa_first_txg(dp->dp_spa))
return (0);
SET_BOOKMARK(&zb, zh->zh_log.blk_cksum.zc_word[ZIL_ZC_OBJSET],
ZB_ZIL_OBJECT, ZB_ZIL_LEVEL, bp->blk_cksum.zc_word[ZIL_ZC_SEQ]);
VERIFY(0 == scan_funcs[scn->scn_phys.scn_func](dp, bp, &zb));
return (0);
}
/* ARGSUSED */
static int
dsl_scan_zil_record(zilog_t *zilog, lr_t *lrc, void *arg, uint64_t claim_txg)
{
if (lrc->lrc_txtype == TX_WRITE) {
zil_scan_arg_t *zsa = arg;
dsl_pool_t *dp = zsa->zsa_dp;
dsl_scan_t *scn = dp->dp_scan;
zil_header_t *zh = zsa->zsa_zh;
lr_write_t *lr = (lr_write_t *)lrc;
blkptr_t *bp = &lr->lr_blkptr;
zbookmark_phys_t zb;
if (BP_IS_HOLE(bp) ||
bp->blk_birth <= scn->scn_phys.scn_cur_min_txg)
return (0);
/*
* birth can be < claim_txg if this record's txg is
* already txg sync'ed (but this log block contains
* other records that are not synced)
*/
if (claim_txg == 0 || bp->blk_birth < claim_txg)
return (0);
SET_BOOKMARK(&zb, zh->zh_log.blk_cksum.zc_word[ZIL_ZC_OBJSET],
lr->lr_foid, ZB_ZIL_LEVEL,
lr->lr_offset / BP_GET_LSIZE(bp));
VERIFY(0 == scan_funcs[scn->scn_phys.scn_func](dp, bp, &zb));
}
return (0);
}
static void
dsl_scan_zil(dsl_pool_t *dp, zil_header_t *zh)
{
uint64_t claim_txg = zh->zh_claim_txg;
zil_scan_arg_t zsa = { dp, zh };
zilog_t *zilog;
/*
* We only want to visit blocks that have been claimed but not yet
* replayed (or, in read-only mode, blocks that *would* be claimed).
*/
if (claim_txg == 0 && spa_writeable(dp->dp_spa))
return;
zilog = zil_alloc(dp->dp_meta_objset, zh);
(void) zil_parse(zilog, dsl_scan_zil_block, dsl_scan_zil_record, &zsa,
claim_txg);
zil_free(zilog);
}
/* ARGSUSED */
static void
dsl_scan_prefetch(dsl_scan_t *scn, arc_buf_t *buf, blkptr_t *bp,
uint64_t objset, uint64_t object, uint64_t blkid)
{
zbookmark_phys_t czb;
arc_flags_t flags = ARC_FLAG_NOWAIT | ARC_FLAG_PREFETCH;
if (zfs_no_scrub_prefetch)
return;
if (BP_IS_HOLE(bp) || bp->blk_birth <= scn->scn_phys.scn_min_txg ||
(BP_GET_LEVEL(bp) == 0 && BP_GET_TYPE(bp) != DMU_OT_DNODE))
return;
SET_BOOKMARK(&czb, objset, object, BP_GET_LEVEL(bp), blkid);
(void) arc_read(scn->scn_zio_root, scn->scn_dp->dp_spa, bp,
NULL, NULL, ZIO_PRIORITY_ASYNC_READ,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SCAN_THREAD, &flags, &czb);
}
static boolean_t
dsl_scan_check_resume(dsl_scan_t *scn, const dnode_phys_t *dnp,
const zbookmark_phys_t *zb)
{
/*
* We never skip over user/group accounting objects (obj<0)
*/
if (!ZB_IS_ZERO(&scn->scn_phys.scn_bookmark) &&
(int64_t)zb->zb_object >= 0) {
/*
* If we already visited this bp & everything below (in
* a prior txg sync), don't bother doing it again.
*/
if (zbookmark_subtree_completed(dnp, zb,
&scn->scn_phys.scn_bookmark))
return (B_TRUE);
/*
* If we found the block we're trying to resume from, or
* we went past it to a different object, zero it out to
* indicate that it's OK to start checking for suspending
* again.
*/
if (bcmp(zb, &scn->scn_phys.scn_bookmark, sizeof (*zb)) == 0 ||
zb->zb_object > scn->scn_phys.scn_bookmark.zb_object) {
dprintf("resuming at %llx/%llx/%llx/%llx\n",
(longlong_t)zb->zb_objset,
(longlong_t)zb->zb_object,
(longlong_t)zb->zb_level,
(longlong_t)zb->zb_blkid);
bzero(&scn->scn_phys.scn_bookmark, sizeof (*zb));
}
}
return (B_FALSE);
}
/*
* Return nonzero on i/o error.
* Return new buf to write out in *bufp.
*/
inline __attribute__((always_inline)) static int
dsl_scan_recurse(dsl_scan_t *scn, dsl_dataset_t *ds, dmu_objset_type_t ostype,
dnode_phys_t *dnp, const blkptr_t *bp,
const zbookmark_phys_t *zb, dmu_tx_t *tx)
{
dsl_pool_t *dp = scn->scn_dp;
int zio_flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_SCAN_THREAD;
int err;
if (BP_GET_LEVEL(bp) > 0) {
arc_flags_t flags = ARC_FLAG_WAIT;
int i;
blkptr_t *cbp;
int epb = BP_GET_LSIZE(bp) >> SPA_BLKPTRSHIFT;
arc_buf_t *buf;
err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, &buf,
ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb);
if (err) {
scn->scn_phys.scn_errors++;
return (err);
}
for (i = 0, cbp = buf->b_data; i < epb; i++, cbp++) {
dsl_scan_prefetch(scn, buf, cbp, zb->zb_objset,
zb->zb_object, zb->zb_blkid * epb + i);
}
for (i = 0, cbp = buf->b_data; i < epb; i++, cbp++) {
zbookmark_phys_t czb;
SET_BOOKMARK(&czb, zb->zb_objset, zb->zb_object,
zb->zb_level - 1,
zb->zb_blkid * epb + i);
dsl_scan_visitbp(cbp, &czb, dnp,
ds, scn, ostype, tx);
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(buf, &buf);
} else if (BP_GET_TYPE(bp) == DMU_OT_DNODE) {
arc_flags_t flags = ARC_FLAG_WAIT;
dnode_phys_t *cdnp;
int i, j;
int epb = BP_GET_LSIZE(bp) >> DNODE_SHIFT;
arc_buf_t *buf;
err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, &buf,
ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb);
if (err) {
scn->scn_phys.scn_errors++;
return (err);
}
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
for (i = 0, cdnp = buf->b_data; i < epb;
i += cdnp->dn_extra_slots + 1,
cdnp += cdnp->dn_extra_slots + 1) {
for (j = 0; j < cdnp->dn_nblkptr; j++) {
blkptr_t *cbp = &cdnp->dn_blkptr[j];
dsl_scan_prefetch(scn, buf, cbp,
zb->zb_objset, zb->zb_blkid * epb + i, j);
}
}
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
for (i = 0, cdnp = buf->b_data; i < epb;
i += cdnp->dn_extra_slots + 1,
cdnp += cdnp->dn_extra_slots + 1) {
dsl_scan_visitdnode(scn, ds, ostype,
cdnp, zb->zb_blkid * epb + i, tx);
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(buf, &buf);
} else if (BP_GET_TYPE(bp) == DMU_OT_OBJSET) {
arc_flags_t flags = ARC_FLAG_WAIT;
objset_phys_t *osp;
arc_buf_t *buf;
err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, &buf,
ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb);
if (err) {
scn->scn_phys.scn_errors++;
return (err);
}
osp = buf->b_data;
dsl_scan_visitdnode(scn, ds, osp->os_type,
&osp->os_meta_dnode, DMU_META_DNODE_OBJECT, tx);
if (OBJSET_BUF_HAS_USERUSED(buf)) {
/*
* We also always visit user/group accounting
* objects, and never skip them, even if we are
* suspending. This is necessary so that the space
* deltas from this txg get integrated.
*/
dsl_scan_visitdnode(scn, ds, osp->os_type,
&osp->os_groupused_dnode,
DMU_GROUPUSED_OBJECT, tx);
dsl_scan_visitdnode(scn, ds, osp->os_type,
&osp->os_userused_dnode,
DMU_USERUSED_OBJECT, tx);
}
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
arc_buf_destroy(buf, &buf);
}
return (0);
}
inline __attribute__((always_inline)) static void
dsl_scan_visitdnode(dsl_scan_t *scn, dsl_dataset_t *ds,
dmu_objset_type_t ostype, dnode_phys_t *dnp,
uint64_t object, dmu_tx_t *tx)
{
int j;
for (j = 0; j < dnp->dn_nblkptr; j++) {
zbookmark_phys_t czb;
SET_BOOKMARK(&czb, ds ? ds->ds_object : 0, object,
dnp->dn_nlevels - 1, j);
dsl_scan_visitbp(&dnp->dn_blkptr[j],
&czb, dnp, ds, scn, ostype, tx);
}
if (dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR) {
zbookmark_phys_t czb;
SET_BOOKMARK(&czb, ds ? ds->ds_object : 0, object,
0, DMU_SPILL_BLKID);
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 04:25:34 +03:00
dsl_scan_visitbp(DN_SPILL_BLKPTR(dnp),
&czb, dnp, ds, scn, ostype, tx);
}
}
/*
* The arguments are in this order because mdb can only print the
* first 5; we want them to be useful.
*/
static void
dsl_scan_visitbp(blkptr_t *bp, const zbookmark_phys_t *zb,
dnode_phys_t *dnp, dsl_dataset_t *ds, dsl_scan_t *scn,
dmu_objset_type_t ostype, dmu_tx_t *tx)
{
dsl_pool_t *dp = scn->scn_dp;
blkptr_t *bp_toread;
bp_toread = kmem_alloc(sizeof (blkptr_t), KM_SLEEP);
*bp_toread = *bp;
/* ASSERT(pbuf == NULL || arc_released(pbuf)); */
if (dsl_scan_check_suspend(scn, zb))
goto out;
if (dsl_scan_check_resume(scn, dnp, zb))
goto out;
if (BP_IS_HOLE(bp))
goto out;
scn->scn_visited_this_txg++;
/*
* This debugging is commented out to conserve stack space. This
* function is called recursively and the debugging addes several
* bytes to the stack for each call. It can be commented back in
* if required to debug an issue in dsl_scan_visitbp().
*
* dprintf_bp(bp,
* "visiting ds=%p/%llu zb=%llx/%llx/%llx/%llx bp=%p",
* ds, ds ? ds->ds_object : 0,
* zb->zb_objset, zb->zb_object, zb->zb_level, zb->zb_blkid,
* bp);
*/
if (bp->blk_birth <= scn->scn_phys.scn_cur_min_txg)
goto out;
if (dsl_scan_recurse(scn, ds, ostype, dnp, bp_toread, zb, tx) != 0)
goto out;
/*
* If dsl_scan_ddt() has already visited this block, it will have
* already done any translations or scrubbing, so don't call the
* callback again.
*/
if (ddt_class_contains(dp->dp_spa,
scn->scn_phys.scn_ddt_class_max, bp)) {
goto out;
}
/*
* If this block is from the future (after cur_max_txg), then we
* are doing this on behalf of a deleted snapshot, and we will
* revisit the future block on the next pass of this dataset.
* Don't scan it now unless we need to because something
* under it was modified.
*/
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
if (BP_PHYSICAL_BIRTH(bp) <= scn->scn_phys.scn_cur_max_txg) {
scan_funcs[scn->scn_phys.scn_func](dp, bp, zb);
}
out:
kmem_free(bp_toread, sizeof (blkptr_t));
}
static void
dsl_scan_visit_rootbp(dsl_scan_t *scn, dsl_dataset_t *ds, blkptr_t *bp,
dmu_tx_t *tx)
{
zbookmark_phys_t zb;
SET_BOOKMARK(&zb, ds ? ds->ds_object : DMU_META_OBJSET,
ZB_ROOT_OBJECT, ZB_ROOT_LEVEL, ZB_ROOT_BLKID);
dsl_scan_visitbp(bp, &zb, NULL,
ds, scn, DMU_OST_NONE, tx);
dprintf_ds(ds, "finished scan%s", "");
}
void
dsl_scan_ds_destroyed(dsl_dataset_t *ds, dmu_tx_t *tx)
{
dsl_pool_t *dp = ds->ds_dir->dd_pool;
dsl_scan_t *scn = dp->dp_scan;
uint64_t mintxg;
if (scn->scn_phys.scn_state != DSS_SCANNING)
return;
if (scn->scn_phys.scn_bookmark.zb_objset == ds->ds_object) {
if (ds->ds_is_snapshot) {
/*
* Note:
* - scn_cur_{min,max}_txg stays the same.
* - Setting the flag is not really necessary if
* scn_cur_max_txg == scn_max_txg, because there
* is nothing after this snapshot that we care
* about. However, we set it anyway and then
* ignore it when we retraverse it in
* dsl_scan_visitds().
*/
scn->scn_phys.scn_bookmark.zb_objset =
dsl_dataset_phys(ds)->ds_next_snap_obj;
zfs_dbgmsg("destroying ds %llu; currently traversing; "
"reset zb_objset to %llu",
(u_longlong_t)ds->ds_object,
(u_longlong_t)dsl_dataset_phys(ds)->
ds_next_snap_obj);
scn->scn_phys.scn_flags |= DSF_VISIT_DS_AGAIN;
} else {
SET_BOOKMARK(&scn->scn_phys.scn_bookmark,
ZB_DESTROYED_OBJSET, 0, 0, 0);
zfs_dbgmsg("destroying ds %llu; currently traversing; "
"reset bookmark to -1,0,0,0",
(u_longlong_t)ds->ds_object);
}
} else if (zap_lookup_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds->ds_object, &mintxg) == 0) {
ASSERT3U(dsl_dataset_phys(ds)->ds_num_children, <=, 1);
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds->ds_object, tx));
if (ds->ds_is_snapshot) {
/*
* We keep the same mintxg; it could be >
* ds_creation_txg if the previous snapshot was
* deleted too.
*/
VERIFY(zap_add_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj,
dsl_dataset_phys(ds)->ds_next_snap_obj,
mintxg, tx) == 0);
zfs_dbgmsg("destroying ds %llu; in queue; "
"replacing with %llu",
(u_longlong_t)ds->ds_object,
(u_longlong_t)dsl_dataset_phys(ds)->
ds_next_snap_obj);
} else {
zfs_dbgmsg("destroying ds %llu; in queue; removing",
(u_longlong_t)ds->ds_object);
}
}
/*
* dsl_scan_sync() should be called after this, and should sync
* out our changed state, but just to be safe, do it here.
*/
dsl_scan_sync_state(scn, tx);
}
void
dsl_scan_ds_snapshotted(dsl_dataset_t *ds, dmu_tx_t *tx)
{
dsl_pool_t *dp = ds->ds_dir->dd_pool;
dsl_scan_t *scn = dp->dp_scan;
uint64_t mintxg;
if (scn->scn_phys.scn_state != DSS_SCANNING)
return;
ASSERT(dsl_dataset_phys(ds)->ds_prev_snap_obj != 0);
if (scn->scn_phys.scn_bookmark.zb_objset == ds->ds_object) {
scn->scn_phys.scn_bookmark.zb_objset =
dsl_dataset_phys(ds)->ds_prev_snap_obj;
zfs_dbgmsg("snapshotting ds %llu; currently traversing; "
"reset zb_objset to %llu",
(u_longlong_t)ds->ds_object,
(u_longlong_t)dsl_dataset_phys(ds)->ds_prev_snap_obj);
} else if (zap_lookup_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds->ds_object, &mintxg) == 0) {
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds->ds_object, tx));
VERIFY(zap_add_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj,
dsl_dataset_phys(ds)->ds_prev_snap_obj, mintxg, tx) == 0);
zfs_dbgmsg("snapshotting ds %llu; in queue; "
"replacing with %llu",
(u_longlong_t)ds->ds_object,
(u_longlong_t)dsl_dataset_phys(ds)->ds_prev_snap_obj);
}
dsl_scan_sync_state(scn, tx);
}
void
dsl_scan_ds_clone_swapped(dsl_dataset_t *ds1, dsl_dataset_t *ds2, dmu_tx_t *tx)
{
dsl_pool_t *dp = ds1->ds_dir->dd_pool;
dsl_scan_t *scn = dp->dp_scan;
uint64_t mintxg;
if (scn->scn_phys.scn_state != DSS_SCANNING)
return;
if (scn->scn_phys.scn_bookmark.zb_objset == ds1->ds_object) {
scn->scn_phys.scn_bookmark.zb_objset = ds2->ds_object;
zfs_dbgmsg("clone_swap ds %llu; currently traversing; "
"reset zb_objset to %llu",
(u_longlong_t)ds1->ds_object,
(u_longlong_t)ds2->ds_object);
} else if (scn->scn_phys.scn_bookmark.zb_objset == ds2->ds_object) {
scn->scn_phys.scn_bookmark.zb_objset = ds1->ds_object;
zfs_dbgmsg("clone_swap ds %llu; currently traversing; "
"reset zb_objset to %llu",
(u_longlong_t)ds2->ds_object,
(u_longlong_t)ds1->ds_object);
}
if (zap_lookup_int_key(dp->dp_meta_objset, scn->scn_phys.scn_queue_obj,
ds1->ds_object, &mintxg) == 0) {
int err;
ASSERT3U(mintxg, ==, dsl_dataset_phys(ds1)->ds_prev_snap_txg);
ASSERT3U(mintxg, ==, dsl_dataset_phys(ds2)->ds_prev_snap_txg);
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds1->ds_object, tx));
err = zap_add_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds2->ds_object, mintxg, tx);
VERIFY(err == 0 || err == EEXIST);
if (err == EEXIST) {
/* Both were there to begin with */
VERIFY(0 == zap_add_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj,
ds1->ds_object, mintxg, tx));
}
zfs_dbgmsg("clone_swap ds %llu; in queue; "
"replacing with %llu",
(u_longlong_t)ds1->ds_object,
(u_longlong_t)ds2->ds_object);
} else if (zap_lookup_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds2->ds_object, &mintxg) == 0) {
ASSERT3U(mintxg, ==, dsl_dataset_phys(ds1)->ds_prev_snap_txg);
ASSERT3U(mintxg, ==, dsl_dataset_phys(ds2)->ds_prev_snap_txg);
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds2->ds_object, tx));
VERIFY(0 == zap_add_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds1->ds_object, mintxg, tx));
zfs_dbgmsg("clone_swap ds %llu; in queue; "
"replacing with %llu",
(u_longlong_t)ds2->ds_object,
(u_longlong_t)ds1->ds_object);
}
dsl_scan_sync_state(scn, tx);
}
struct enqueue_clones_arg {
dmu_tx_t *tx;
uint64_t originobj;
};
/* ARGSUSED */
static int
enqueue_clones_cb(dsl_pool_t *dp, dsl_dataset_t *hds, void *arg)
{
struct enqueue_clones_arg *eca = arg;
dsl_dataset_t *ds;
int err;
dsl_scan_t *scn = dp->dp_scan;
if (dsl_dir_phys(hds->ds_dir)->dd_origin_obj != eca->originobj)
return (0);
err = dsl_dataset_hold_obj(dp, hds->ds_object, FTAG, &ds);
if (err)
return (err);
while (dsl_dataset_phys(ds)->ds_prev_snap_obj != eca->originobj) {
dsl_dataset_t *prev;
err = dsl_dataset_hold_obj(dp,
dsl_dataset_phys(ds)->ds_prev_snap_obj, FTAG, &prev);
dsl_dataset_rele(ds, FTAG);
if (err)
return (err);
ds = prev;
}
VERIFY(zap_add_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds->ds_object,
dsl_dataset_phys(ds)->ds_prev_snap_txg, eca->tx) == 0);
dsl_dataset_rele(ds, FTAG);
return (0);
}
static void
dsl_scan_visitds(dsl_scan_t *scn, uint64_t dsobj, dmu_tx_t *tx)
{
dsl_pool_t *dp = scn->scn_dp;
dsl_dataset_t *ds;
objset_t *os;
char *dsname;
VERIFY3U(0, ==, dsl_dataset_hold_obj(dp, dsobj, FTAG, &ds));
if (scn->scn_phys.scn_cur_min_txg >=
scn->scn_phys.scn_max_txg) {
/*
* This can happen if this snapshot was created after the
* scan started, and we already completed a previous snapshot
* that was created after the scan started. This snapshot
* only references blocks with:
*
* birth < our ds_creation_txg
* cur_min_txg is no less than ds_creation_txg.
* We have already visited these blocks.
* or
* birth > scn_max_txg
* The scan requested not to visit these blocks.
*
* Subsequent snapshots (and clones) can reference our
* blocks, or blocks with even higher birth times.
* Therefore we do not need to visit them either,
* so we do not add them to the work queue.
*
* Note that checking for cur_min_txg >= cur_max_txg
* is not sufficient, because in that case we may need to
* visit subsequent snapshots. This happens when min_txg > 0,
* which raises cur_min_txg. In this case we will visit
* this dataset but skip all of its blocks, because the
* rootbp's birth time is < cur_min_txg. Then we will
* add the next snapshots/clones to the work queue.
*/
char *dsname = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
dsl_dataset_name(ds, dsname);
zfs_dbgmsg("scanning dataset %llu (%s) is unnecessary because "
"cur_min_txg (%llu) >= max_txg (%llu)",
dsobj, dsname,
scn->scn_phys.scn_cur_min_txg,
scn->scn_phys.scn_max_txg);
kmem_free(dsname, MAXNAMELEN);
goto out;
}
if (dmu_objset_from_ds(ds, &os))
goto out;
/*
* Only the ZIL in the head (non-snapshot) is valid. Even though
* snapshots can have ZIL block pointers (which may be the same
* BP as in the head), they must be ignored. So we traverse the
* ZIL here, rather than in scan_recurse(), because the regular
* snapshot block-sharing rules don't apply to it.
*/
if (DSL_SCAN_IS_SCRUB_RESILVER(scn) && !ds->ds_is_snapshot)
dsl_scan_zil(dp, &os->os_zil_header);
/*
* Iterate over the bps in this ds.
*/
dmu_buf_will_dirty(ds->ds_dbuf, tx);
rrw_enter(&ds->ds_bp_rwlock, RW_READER, FTAG);
dsl_scan_visit_rootbp(scn, ds, &dsl_dataset_phys(ds)->ds_bp, tx);
rrw_exit(&ds->ds_bp_rwlock, FTAG);
dsname = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN, KM_SLEEP);
dsl_dataset_name(ds, dsname);
zfs_dbgmsg("scanned dataset %llu (%s) with min=%llu max=%llu; "
"suspending=%u",
(longlong_t)dsobj, dsname,
(longlong_t)scn->scn_phys.scn_cur_min_txg,
(longlong_t)scn->scn_phys.scn_cur_max_txg,
(int)scn->scn_suspending);
kmem_free(dsname, ZFS_MAX_DATASET_NAME_LEN);
if (scn->scn_suspending)
goto out;
/*
* We've finished this pass over this dataset.
*/
/*
* If we did not completely visit this dataset, do another pass.
*/
if (scn->scn_phys.scn_flags & DSF_VISIT_DS_AGAIN) {
zfs_dbgmsg("incomplete pass; visiting again");
scn->scn_phys.scn_flags &= ~DSF_VISIT_DS_AGAIN;
VERIFY(zap_add_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, ds->ds_object,
scn->scn_phys.scn_cur_max_txg, tx) == 0);
goto out;
}
/*
* Add descendent datasets to work queue.
*/
if (dsl_dataset_phys(ds)->ds_next_snap_obj != 0) {
VERIFY(zap_add_int_key(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj,
dsl_dataset_phys(ds)->ds_next_snap_obj,
dsl_dataset_phys(ds)->ds_creation_txg, tx) == 0);
}
if (dsl_dataset_phys(ds)->ds_num_children > 1) {
boolean_t usenext = B_FALSE;
if (dsl_dataset_phys(ds)->ds_next_clones_obj != 0) {
uint64_t count;
/*
* A bug in a previous version of the code could
* cause upgrade_clones_cb() to not set
* ds_next_snap_obj when it should, leading to a
* missing entry. Therefore we can only use the
* next_clones_obj when its count is correct.
*/
int err = zap_count(dp->dp_meta_objset,
dsl_dataset_phys(ds)->ds_next_clones_obj, &count);
if (err == 0 &&
count == dsl_dataset_phys(ds)->ds_num_children - 1)
usenext = B_TRUE;
}
if (usenext) {
VERIFY0(zap_join_key(dp->dp_meta_objset,
dsl_dataset_phys(ds)->ds_next_clones_obj,
scn->scn_phys.scn_queue_obj,
dsl_dataset_phys(ds)->ds_creation_txg, tx));
} else {
struct enqueue_clones_arg eca;
eca.tx = tx;
eca.originobj = ds->ds_object;
VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj,
enqueue_clones_cb, &eca, DS_FIND_CHILDREN));
}
}
out:
dsl_dataset_rele(ds, FTAG);
}
/* ARGSUSED */
static int
enqueue_cb(dsl_pool_t *dp, dsl_dataset_t *hds, void *arg)
{
dmu_tx_t *tx = arg;
dsl_dataset_t *ds;
int err;
dsl_scan_t *scn = dp->dp_scan;
err = dsl_dataset_hold_obj(dp, hds->ds_object, FTAG, &ds);
if (err)
return (err);
while (dsl_dataset_phys(ds)->ds_prev_snap_obj != 0) {
dsl_dataset_t *prev;
err = dsl_dataset_hold_obj(dp,
dsl_dataset_phys(ds)->ds_prev_snap_obj, FTAG, &prev);
if (err) {
dsl_dataset_rele(ds, FTAG);
return (err);
}
/*
* If this is a clone, we don't need to worry about it for now.
*/
if (dsl_dataset_phys(prev)->ds_next_snap_obj != ds->ds_object) {
dsl_dataset_rele(ds, FTAG);
dsl_dataset_rele(prev, FTAG);
return (0);
}
dsl_dataset_rele(ds, FTAG);
ds = prev;
}
VERIFY(zap_add_int_key(dp->dp_meta_objset, scn->scn_phys.scn_queue_obj,
ds->ds_object, dsl_dataset_phys(ds)->ds_prev_snap_txg, tx) == 0);
dsl_dataset_rele(ds, FTAG);
return (0);
}
/*
* Scrub/dedup interaction.
*
* If there are N references to a deduped block, we don't want to scrub it
* N times -- ideally, we should scrub it exactly once.
*
* We leverage the fact that the dde's replication class (enum ddt_class)
* is ordered from highest replication class (DDT_CLASS_DITTO) to lowest
* (DDT_CLASS_UNIQUE) so that we may walk the DDT in that order.
*
* To prevent excess scrubbing, the scrub begins by walking the DDT
* to find all blocks with refcnt > 1, and scrubs each of these once.
* Since there are two replication classes which contain blocks with
* refcnt > 1, we scrub the highest replication class (DDT_CLASS_DITTO) first.
* Finally the top-down scrub begins, only visiting blocks with refcnt == 1.
*
* There would be nothing more to say if a block's refcnt couldn't change
* during a scrub, but of course it can so we must account for changes
* in a block's replication class.
*
* Here's an example of what can occur:
*
* If a block has refcnt > 1 during the DDT scrub phase, but has refcnt == 1
* when visited during the top-down scrub phase, it will be scrubbed twice.
* This negates our scrub optimization, but is otherwise harmless.
*
* If a block has refcnt == 1 during the DDT scrub phase, but has refcnt > 1
* on each visit during the top-down scrub phase, it will never be scrubbed.
* To catch this, ddt_sync_entry() notifies the scrub code whenever a block's
* reference class transitions to a higher level (i.e DDT_CLASS_UNIQUE to
* DDT_CLASS_DUPLICATE); if it transitions from refcnt == 1 to refcnt > 1
* while a scrub is in progress, it scrubs the block right then.
*/
static void
dsl_scan_ddt(dsl_scan_t *scn, dmu_tx_t *tx)
{
ddt_bookmark_t *ddb = &scn->scn_phys.scn_ddt_bookmark;
ddt_entry_t dde;
int error;
uint64_t n = 0;
bzero(&dde, sizeof (ddt_entry_t));
while ((error = ddt_walk(scn->scn_dp->dp_spa, ddb, &dde)) == 0) {
ddt_t *ddt;
if (ddb->ddb_class > scn->scn_phys.scn_ddt_class_max)
break;
dprintf("visiting ddb=%llu/%llu/%llu/%llx\n",
(longlong_t)ddb->ddb_class,
(longlong_t)ddb->ddb_type,
(longlong_t)ddb->ddb_checksum,
(longlong_t)ddb->ddb_cursor);
/* There should be no pending changes to the dedup table */
ddt = scn->scn_dp->dp_spa->spa_ddt[ddb->ddb_checksum];
ASSERT(avl_first(&ddt->ddt_tree) == NULL);
dsl_scan_ddt_entry(scn, ddb->ddb_checksum, &dde, tx);
n++;
if (dsl_scan_check_suspend(scn, NULL))
break;
}
zfs_dbgmsg("scanned %llu ddt entries with class_max = %u; "
"suspending=%u", (longlong_t)n,
(int)scn->scn_phys.scn_ddt_class_max, (int)scn->scn_suspending);
ASSERT(error == 0 || error == ENOENT);
ASSERT(error != ENOENT ||
ddb->ddb_class > scn->scn_phys.scn_ddt_class_max);
}
/* ARGSUSED */
void
dsl_scan_ddt_entry(dsl_scan_t *scn, enum zio_checksum checksum,
ddt_entry_t *dde, dmu_tx_t *tx)
{
const ddt_key_t *ddk = &dde->dde_key;
ddt_phys_t *ddp = dde->dde_phys;
blkptr_t bp;
zbookmark_phys_t zb = { 0 };
int p;
if (scn->scn_phys.scn_state != DSS_SCANNING)
return;
for (p = 0; p < DDT_PHYS_TYPES; p++, ddp++) {
if (ddp->ddp_phys_birth == 0 ||
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
ddp->ddp_phys_birth > scn->scn_phys.scn_max_txg)
continue;
ddt_bp_create(checksum, ddk, ddp, &bp);
scn->scn_visited_this_txg++;
scan_funcs[scn->scn_phys.scn_func](scn->scn_dp, &bp, &zb);
}
}
static void
dsl_scan_visit(dsl_scan_t *scn, dmu_tx_t *tx)
{
dsl_pool_t *dp = scn->scn_dp;
zap_cursor_t *zc;
zap_attribute_t *za;
if (scn->scn_phys.scn_ddt_bookmark.ddb_class <=
scn->scn_phys.scn_ddt_class_max) {
scn->scn_phys.scn_cur_min_txg = scn->scn_phys.scn_min_txg;
scn->scn_phys.scn_cur_max_txg = scn->scn_phys.scn_max_txg;
dsl_scan_ddt(scn, tx);
if (scn->scn_suspending)
return;
}
if (scn->scn_phys.scn_bookmark.zb_objset == DMU_META_OBJSET) {
/* First do the MOS & ORIGIN */
scn->scn_phys.scn_cur_min_txg = scn->scn_phys.scn_min_txg;
scn->scn_phys.scn_cur_max_txg = scn->scn_phys.scn_max_txg;
dsl_scan_visit_rootbp(scn, NULL,
&dp->dp_meta_rootbp, tx);
spa_set_rootblkptr(dp->dp_spa, &dp->dp_meta_rootbp);
if (scn->scn_suspending)
return;
if (spa_version(dp->dp_spa) < SPA_VERSION_DSL_SCRUB) {
VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj,
enqueue_cb, tx, DS_FIND_CHILDREN));
} else {
dsl_scan_visitds(scn,
dp->dp_origin_snap->ds_object, tx);
}
ASSERT(!scn->scn_suspending);
} else if (scn->scn_phys.scn_bookmark.zb_objset !=
ZB_DESTROYED_OBJSET) {
/*
* If we were suspended, continue from here. Note if the
* ds we were suspended on was deleted, the zb_objset may
* be -1, so we will skip this and find a new objset
* below.
*/
dsl_scan_visitds(scn, scn->scn_phys.scn_bookmark.zb_objset, tx);
if (scn->scn_suspending)
return;
}
/*
* In case we were suspended right at the end of the ds, zero the
* bookmark so we don't think that we're still trying to resume.
*/
bzero(&scn->scn_phys.scn_bookmark, sizeof (zbookmark_phys_t));
zc = kmem_alloc(sizeof (zap_cursor_t), KM_SLEEP);
za = kmem_alloc(sizeof (zap_attribute_t), KM_SLEEP);
/* keep pulling things out of the zap-object-as-queue */
while (zap_cursor_init(zc, dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj),
zap_cursor_retrieve(zc, za) == 0) {
dsl_dataset_t *ds;
uint64_t dsobj;
dsobj = zfs_strtonum(za->za_name, NULL);
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
scn->scn_phys.scn_queue_obj, dsobj, tx));
/* Set up min/max txg */
VERIFY3U(0, ==, dsl_dataset_hold_obj(dp, dsobj, FTAG, &ds));
if (za->za_first_integer != 0) {
scn->scn_phys.scn_cur_min_txg =
MAX(scn->scn_phys.scn_min_txg,
za->za_first_integer);
} else {
scn->scn_phys.scn_cur_min_txg =
MAX(scn->scn_phys.scn_min_txg,
dsl_dataset_phys(ds)->ds_prev_snap_txg);
}
scn->scn_phys.scn_cur_max_txg = dsl_scan_ds_maxtxg(ds);
dsl_dataset_rele(ds, FTAG);
dsl_scan_visitds(scn, dsobj, tx);
zap_cursor_fini(zc);
if (scn->scn_suspending)
goto out;
}
zap_cursor_fini(zc);
out:
kmem_free(za, sizeof (zap_attribute_t));
kmem_free(zc, sizeof (zap_cursor_t));
}
static boolean_t
dsl_scan_free_should_suspend(dsl_scan_t *scn)
{
uint64_t elapsed_nanosecs;
if (zfs_recover)
return (B_FALSE);
if (scn->scn_visited_this_txg >= zfs_free_max_blocks)
return (B_TRUE);
elapsed_nanosecs = gethrtime() - scn->scn_sync_start_time;
return (elapsed_nanosecs / NANOSEC > zfs_txg_timeout ||
(NSEC2MSEC(elapsed_nanosecs) > zfs_free_min_time_ms &&
txg_sync_waiting(scn->scn_dp)) ||
spa_shutting_down(scn->scn_dp->dp_spa));
}
static int
dsl_scan_free_block_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
dsl_scan_t *scn = arg;
if (!scn->scn_is_bptree ||
(BP_GET_LEVEL(bp) == 0 && BP_GET_TYPE(bp) != DMU_OT_OBJSET)) {
if (dsl_scan_free_should_suspend(scn))
return (SET_ERROR(ERESTART));
}
zio_nowait(zio_free_sync(scn->scn_zio_root, scn->scn_dp->dp_spa,
dmu_tx_get_txg(tx), bp, 0));
dsl_dir_diduse_space(tx->tx_pool->dp_free_dir, DD_USED_HEAD,
-bp_get_dsize_sync(scn->scn_dp->dp_spa, bp),
-BP_GET_PSIZE(bp), -BP_GET_UCSIZE(bp), tx);
scn->scn_visited_this_txg++;
return (0);
}
boolean_t
dsl_scan_active(dsl_scan_t *scn)
{
spa_t *spa = scn->scn_dp->dp_spa;
uint64_t used = 0, comp, uncomp;
if (spa->spa_load_state != SPA_LOAD_NONE)
return (B_FALSE);
if (spa_shutting_down(spa))
return (B_FALSE);
if ((scn->scn_phys.scn_state == DSS_SCANNING &&
!dsl_scan_is_paused_scrub(scn)) ||
(scn->scn_async_destroying && !scn->scn_async_stalled))
return (B_TRUE);
if (spa_version(scn->scn_dp->dp_spa) >= SPA_VERSION_DEADLISTS) {
(void) bpobj_space(&scn->scn_dp->dp_free_bpobj,
&used, &comp, &uncomp);
}
return (used != 0);
}
/* Called whenever a txg syncs. */
void
dsl_scan_sync(dsl_pool_t *dp, dmu_tx_t *tx)
{
dsl_scan_t *scn = dp->dp_scan;
spa_t *spa = dp->dp_spa;
int err = 0;
/*
* Check for scn_restart_txg before checking spa_load_state, so
* that we can restart an old-style scan while the pool is being
* imported (see dsl_scan_init).
*/
if (dsl_scan_restarting(scn, tx)) {
pool_scan_func_t func = POOL_SCAN_SCRUB;
dsl_scan_done(scn, B_FALSE, tx);
if (vdev_resilver_needed(spa->spa_root_vdev, NULL, NULL))
func = POOL_SCAN_RESILVER;
zfs_dbgmsg("restarting scan func=%u txg=%llu",
func, tx->tx_txg);
dsl_scan_setup_sync(&func, tx);
}
/*
* Only process scans in sync pass 1.
*/
if (spa_sync_pass(dp->dp_spa) > 1)
return;
/*
* If the spa is shutting down, then stop scanning. This will
* ensure that the scan does not dirty any new data during the
* shutdown phase.
*/
if (spa_shutting_down(spa))
return;
/*
* If the scan is inactive due to a stalled async destroy, try again.
*/
if (!scn->scn_async_stalled && !dsl_scan_active(scn))
return;
scn->scn_visited_this_txg = 0;
scn->scn_suspending = B_FALSE;
scn->scn_sync_start_time = gethrtime();
spa->spa_scrub_active = B_TRUE;
/*
* First process the async destroys. If we suspend, don't do
* any scrubbing or resilvering. This ensures that there are no
* async destroys while we are scanning, so the scan code doesn't
* have to worry about traversing it. It is also faster to free the
* blocks than to scrub them.
*/
if (zfs_free_bpobj_enabled &&
spa_version(dp->dp_spa) >= SPA_VERSION_DEADLISTS) {
scn->scn_is_bptree = B_FALSE;
scn->scn_zio_root = zio_root(dp->dp_spa, NULL,
NULL, ZIO_FLAG_MUSTSUCCEED);
err = bpobj_iterate(&dp->dp_free_bpobj,
dsl_scan_free_block_cb, scn, tx);
VERIFY3U(0, ==, zio_wait(scn->scn_zio_root));
if (err != 0 && err != ERESTART)
zfs_panic_recover("error %u from bpobj_iterate()", err);
}
if (err == 0 && spa_feature_is_active(spa, SPA_FEATURE_ASYNC_DESTROY)) {
ASSERT(scn->scn_async_destroying);
scn->scn_is_bptree = B_TRUE;
scn->scn_zio_root = zio_root(dp->dp_spa, NULL,
NULL, ZIO_FLAG_MUSTSUCCEED);
err = bptree_iterate(dp->dp_meta_objset,
dp->dp_bptree_obj, B_TRUE, dsl_scan_free_block_cb, scn, tx);
VERIFY0(zio_wait(scn->scn_zio_root));
if (err == EIO || err == ECKSUM) {
err = 0;
} else if (err != 0 && err != ERESTART) {
zfs_panic_recover("error %u from "
"traverse_dataset_destroyed()", err);
}
if (bptree_is_empty(dp->dp_meta_objset, dp->dp_bptree_obj)) {
/* finished; deactivate async destroy feature */
spa_feature_decr(spa, SPA_FEATURE_ASYNC_DESTROY, tx);
ASSERT(!spa_feature_is_active(spa,
SPA_FEATURE_ASYNC_DESTROY));
VERIFY0(zap_remove(dp->dp_meta_objset,
DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_BPTREE_OBJ, tx));
VERIFY0(bptree_free(dp->dp_meta_objset,
dp->dp_bptree_obj, tx));
dp->dp_bptree_obj = 0;
scn->scn_async_destroying = B_FALSE;
scn->scn_async_stalled = B_FALSE;
} else {
/*
* If we didn't make progress, mark the async
* destroy as stalled, so that we will not initiate
* a spa_sync() on its behalf. Note that we only
* check this if we are not finished, because if the
* bptree had no blocks for us to visit, we can
* finish without "making progress".
*/
scn->scn_async_stalled =
(scn->scn_visited_this_txg == 0);
}
}
if (scn->scn_visited_this_txg) {
zfs_dbgmsg("freed %llu blocks in %llums from "
"free_bpobj/bptree txg %llu; err=%u",
(longlong_t)scn->scn_visited_this_txg,
(longlong_t)
NSEC2MSEC(gethrtime() - scn->scn_sync_start_time),
(longlong_t)tx->tx_txg, err);
scn->scn_visited_this_txg = 0;
/*
* Write out changes to the DDT that may be required as a
* result of the blocks freed. This ensures that the DDT
* is clean when a scrub/resilver runs.
*/
ddt_sync(spa, tx->tx_txg);
}
if (err != 0)
return;
if (dp->dp_free_dir != NULL && !scn->scn_async_destroying &&
zfs_free_leak_on_eio &&
(dsl_dir_phys(dp->dp_free_dir)->dd_used_bytes != 0 ||
dsl_dir_phys(dp->dp_free_dir)->dd_compressed_bytes != 0 ||
dsl_dir_phys(dp->dp_free_dir)->dd_uncompressed_bytes != 0)) {
/*
* We have finished background destroying, but there is still
* some space left in the dp_free_dir. Transfer this leaked
* space to the dp_leak_dir.
*/
if (dp->dp_leak_dir == NULL) {
rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG);
(void) dsl_dir_create_sync(dp, dp->dp_root_dir,
LEAK_DIR_NAME, tx);
VERIFY0(dsl_pool_open_special_dir(dp,
LEAK_DIR_NAME, &dp->dp_leak_dir));
rrw_exit(&dp->dp_config_rwlock, FTAG);
}
dsl_dir_diduse_space(dp->dp_leak_dir, DD_USED_HEAD,
dsl_dir_phys(dp->dp_free_dir)->dd_used_bytes,
dsl_dir_phys(dp->dp_free_dir)->dd_compressed_bytes,
dsl_dir_phys(dp->dp_free_dir)->dd_uncompressed_bytes, tx);
dsl_dir_diduse_space(dp->dp_free_dir, DD_USED_HEAD,
-dsl_dir_phys(dp->dp_free_dir)->dd_used_bytes,
-dsl_dir_phys(dp->dp_free_dir)->dd_compressed_bytes,
-dsl_dir_phys(dp->dp_free_dir)->dd_uncompressed_bytes, tx);
}
if (dp->dp_free_dir != NULL && !scn->scn_async_destroying) {
/* finished; verify that space accounting went to zero */
ASSERT0(dsl_dir_phys(dp->dp_free_dir)->dd_used_bytes);
ASSERT0(dsl_dir_phys(dp->dp_free_dir)->dd_compressed_bytes);
ASSERT0(dsl_dir_phys(dp->dp_free_dir)->dd_uncompressed_bytes);
}
if (scn->scn_phys.scn_state != DSS_SCANNING)
return;
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
if (scn->scn_done_txg == tx->tx_txg) {
ASSERT(!scn->scn_suspending);
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
/* finished with scan. */
zfs_dbgmsg("txg %llu scan complete", tx->tx_txg);
dsl_scan_done(scn, B_TRUE, tx);
ASSERT3U(spa->spa_scrub_inflight, ==, 0);
dsl_scan_sync_state(scn, tx);
return;
}
if (dsl_scan_is_paused_scrub(scn))
return;
if (scn->scn_phys.scn_ddt_bookmark.ddb_class <=
scn->scn_phys.scn_ddt_class_max) {
zfs_dbgmsg("doing scan sync txg %llu; "
"ddt bm=%llu/%llu/%llu/%llx",
(longlong_t)tx->tx_txg,
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_class,
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_type,
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_checksum,
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_cursor);
ASSERT(scn->scn_phys.scn_bookmark.zb_objset == 0);
ASSERT(scn->scn_phys.scn_bookmark.zb_object == 0);
ASSERT(scn->scn_phys.scn_bookmark.zb_level == 0);
ASSERT(scn->scn_phys.scn_bookmark.zb_blkid == 0);
} else {
zfs_dbgmsg("doing scan sync txg %llu; bm=%llu/%llu/%llu/%llu",
(longlong_t)tx->tx_txg,
(longlong_t)scn->scn_phys.scn_bookmark.zb_objset,
(longlong_t)scn->scn_phys.scn_bookmark.zb_object,
(longlong_t)scn->scn_phys.scn_bookmark.zb_level,
(longlong_t)scn->scn_phys.scn_bookmark.zb_blkid);
}
scn->scn_zio_root = zio_root(dp->dp_spa, NULL,
NULL, ZIO_FLAG_CANFAIL);
dsl_pool_config_enter(dp, FTAG);
dsl_scan_visit(scn, tx);
dsl_pool_config_exit(dp, FTAG);
(void) zio_wait(scn->scn_zio_root);
scn->scn_zio_root = NULL;
zfs_dbgmsg("visited %llu blocks in %llums",
(longlong_t)scn->scn_visited_this_txg,
(longlong_t)NSEC2MSEC(gethrtime() - scn->scn_sync_start_time));
if (!scn->scn_suspending) {
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
scn->scn_done_txg = tx->tx_txg + 1;
zfs_dbgmsg("txg %llu traversal complete, waiting till txg %llu",
tx->tx_txg, scn->scn_done_txg);
}
if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) {
mutex_enter(&spa->spa_scrub_lock);
while (spa->spa_scrub_inflight > 0) {
cv_wait(&spa->spa_scrub_io_cv,
&spa->spa_scrub_lock);
}
mutex_exit(&spa->spa_scrub_lock);
}
dsl_scan_sync_state(scn, tx);
}
/*
* This will start a new scan, or restart an existing one.
*/
void
dsl_resilver_restart(dsl_pool_t *dp, uint64_t txg)
{
if (txg == 0) {
dmu_tx_t *tx;
tx = dmu_tx_create_dd(dp->dp_mos_dir);
VERIFY(0 == dmu_tx_assign(tx, TXG_WAIT));
txg = dmu_tx_get_txg(tx);
dp->dp_scan->scn_restart_txg = txg;
dmu_tx_commit(tx);
} else {
dp->dp_scan->scn_restart_txg = txg;
}
zfs_dbgmsg("restarting resilver txg=%llu", txg);
}
boolean_t
dsl_scan_resilvering(dsl_pool_t *dp)
{
return (dp->dp_scan->scn_phys.scn_state == DSS_SCANNING &&
dp->dp_scan->scn_phys.scn_func == POOL_SCAN_RESILVER);
}
/*
* scrub consumers
*/
static void
count_block(zfs_all_blkstats_t *zab, const blkptr_t *bp)
{
int i;
/*
* If we resume after a reboot, zab will be NULL; don't record
* incomplete stats in that case.
*/
if (zab == NULL)
return;
for (i = 0; i < 4; i++) {
int l = (i < 2) ? BP_GET_LEVEL(bp) : DN_MAX_LEVELS;
int t = (i & 1) ? BP_GET_TYPE(bp) : DMU_OT_TOTAL;
int equal;
zfs_blkstat_t *zb;
if (t & DMU_OT_NEWTYPE)
t = DMU_OT_OTHER;
zb = &zab->zab_type[l][t];
zb->zb_count++;
zb->zb_asize += BP_GET_ASIZE(bp);
zb->zb_lsize += BP_GET_LSIZE(bp);
zb->zb_psize += BP_GET_PSIZE(bp);
zb->zb_gangs += BP_COUNT_GANG(bp);
switch (BP_GET_NDVAS(bp)) {
case 2:
if (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[1]))
zb->zb_ditto_2_of_2_samevdev++;
break;
case 3:
equal = (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[1])) +
(DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[2])) +
(DVA_GET_VDEV(&bp->blk_dva[1]) ==
DVA_GET_VDEV(&bp->blk_dva[2]));
if (equal == 1)
zb->zb_ditto_2_of_3_samevdev++;
else if (equal == 3)
zb->zb_ditto_3_of_3_samevdev++;
break;
}
}
}
static void
dsl_scan_scrub_done(zio_t *zio)
{
spa_t *spa = zio->io_spa;
abd_free(zio->io_abd);
mutex_enter(&spa->spa_scrub_lock);
spa->spa_scrub_inflight--;
cv_broadcast(&spa->spa_scrub_io_cv);
if (zio->io_error && (zio->io_error != ECKSUM ||
!(zio->io_flags & ZIO_FLAG_SPECULATIVE))) {
spa->spa_dsl_pool->dp_scan->scn_phys.scn_errors++;
}
mutex_exit(&spa->spa_scrub_lock);
}
static boolean_t
dsl_scan_need_resilver(spa_t *spa, const dva_t *dva, size_t psize,
uint64_t phys_birth)
{
vdev_t *vd;
if (DVA_GET_GANG(dva)) {
/*
* Gang members may be spread across multiple
* vdevs, so the best estimate we have is the
* scrub range, which has already been checked.
* XXX -- it would be better to change our
* allocation policy to ensure that all
* gang members reside on the same vdev.
*/
return (B_TRUE);
}
vd = vdev_lookup_top(spa, DVA_GET_VDEV(dva));
/*
* Check if the txg falls within the range which must be
* resilvered. DVAs outside this range can always be skipped.
*/
if (!vdev_dtl_contains(vd, DTL_PARTIAL, phys_birth, 1))
return (B_FALSE);
/*
* Check if the top-level vdev must resilver this offset.
* When the offset does not intersect with a dirty leaf DTL
* then it may be possible to skip the resilver IO. The psize
* is provided instead of asize to simplify the check for RAIDZ.
*/
if (!vdev_dtl_need_resilver(vd, DVA_GET_OFFSET(dva), psize))
return (B_FALSE);
return (B_TRUE);
}
static int
dsl_scan_scrub_cb(dsl_pool_t *dp,
const blkptr_t *bp, const zbookmark_phys_t *zb)
{
dsl_scan_t *scn = dp->dp_scan;
size_t psize = BP_GET_PSIZE(bp);
spa_t *spa = dp->dp_spa;
uint64_t phys_birth = BP_PHYSICAL_BIRTH(bp);
boolean_t needs_io = B_FALSE;
int zio_flags = ZIO_FLAG_SCAN_THREAD | ZIO_FLAG_RAW | ZIO_FLAG_CANFAIL;
int scan_delay = 0;
int d;
if (phys_birth <= scn->scn_phys.scn_min_txg ||
phys_birth >= scn->scn_phys.scn_max_txg)
return (0);
count_block(dp->dp_blkstats, bp);
if (BP_IS_EMBEDDED(bp))
return (0);
ASSERT(DSL_SCAN_IS_SCRUB_RESILVER(scn));
if (scn->scn_phys.scn_func == POOL_SCAN_SCRUB) {
zio_flags |= ZIO_FLAG_SCRUB;
needs_io = B_TRUE;
scan_delay = zfs_scrub_delay;
} else {
ASSERT3U(scn->scn_phys.scn_func, ==, POOL_SCAN_RESILVER);
zio_flags |= ZIO_FLAG_RESILVER;
needs_io = B_FALSE;
scan_delay = zfs_resilver_delay;
}
/* If it's an intent log block, failure is expected. */
if (zb->zb_level == ZB_ZIL_LEVEL)
zio_flags |= ZIO_FLAG_SPECULATIVE;
for (d = 0; d < BP_GET_NDVAS(bp); d++) {
const dva_t *dva = &bp->blk_dva[d];
/*
* Keep track of how much data we've examined so that
* zpool(1M) status can make useful progress reports.
*/
scn->scn_phys.scn_examined += DVA_GET_ASIZE(dva);
spa->spa_scan_pass_exam += DVA_GET_ASIZE(dva);
/* if it's a resilver, this may not be in the target range */
if (!needs_io)
needs_io = dsl_scan_need_resilver(spa, dva, psize,
phys_birth);
}
if (needs_io && !zfs_no_scrub_io) {
vdev_t *rvd = spa->spa_root_vdev;
uint64_t maxinflight = rvd->vdev_children * zfs_top_maxinflight;
mutex_enter(&spa->spa_scrub_lock);
while (spa->spa_scrub_inflight >= maxinflight)
cv_wait(&spa->spa_scrub_io_cv, &spa->spa_scrub_lock);
spa->spa_scrub_inflight++;
mutex_exit(&spa->spa_scrub_lock);
/*
* If we're seeing recent (zfs_scan_idle) "important" I/Os
* then throttle our workload to limit the impact of a scan.
*/
if (ddi_get_lbolt64() - spa->spa_last_io <= zfs_scan_idle)
delay(scan_delay);
zio_nowait(zio_read(NULL, spa, bp,
abd_alloc_for_io(psize, B_FALSE),
psize, dsl_scan_scrub_done, NULL,
ZIO_PRIORITY_SCRUB, zio_flags, zb));
}
/* do not relocate this block */
return (0);
}
/*
* Called by the ZFS_IOC_POOL_SCAN ioctl to start a scrub or resilver.
* Can also be called to resume a paused scrub.
*/
int
dsl_scan(dsl_pool_t *dp, pool_scan_func_t func)
{
spa_t *spa = dp->dp_spa;
dsl_scan_t *scn = dp->dp_scan;
/*
* Purge all vdev caches and probe all devices. We do this here
* rather than in sync context because this requires a writer lock
* on the spa_config lock, which we can't do from sync context. The
* spa_scrub_reopen flag indicates that vdev_open() should not
* attempt to start another scrub.
*/
spa_vdev_state_enter(spa, SCL_NONE);
spa->spa_scrub_reopen = B_TRUE;
vdev_reopen(spa->spa_root_vdev);
spa->spa_scrub_reopen = B_FALSE;
(void) spa_vdev_state_exit(spa, NULL, 0);
if (func == POOL_SCAN_SCRUB && dsl_scan_is_paused_scrub(scn)) {
/* got scrub start cmd, resume paused scrub */
int err = dsl_scrub_set_pause_resume(scn->scn_dp,
POOL_SCRUB_NORMAL);
if (err == 0)
return (ECANCELED);
return (SET_ERROR(err));
}
return (dsl_sync_task(spa_name(spa), dsl_scan_setup_check,
dsl_scan_setup_sync, &func, 0, ZFS_SPACE_CHECK_NONE));
}
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
static boolean_t
dsl_scan_restarting(dsl_scan_t *scn, dmu_tx_t *tx)
{
return (scn->scn_restart_txg != 0 &&
scn->scn_restart_txg <= tx->tx_txg);
}
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
#if defined(_KERNEL) && defined(HAVE_SPL)
module_param(zfs_top_maxinflight, int, 0644);
MODULE_PARM_DESC(zfs_top_maxinflight, "Max I/Os per top-level");
module_param(zfs_resilver_delay, int, 0644);
MODULE_PARM_DESC(zfs_resilver_delay, "Number of ticks to delay resilver");
module_param(zfs_scrub_delay, int, 0644);
MODULE_PARM_DESC(zfs_scrub_delay, "Number of ticks to delay scrub");
module_param(zfs_scan_idle, int, 0644);
MODULE_PARM_DESC(zfs_scan_idle, "Idle window in clock ticks");
module_param(zfs_scan_min_time_ms, int, 0644);
MODULE_PARM_DESC(zfs_scan_min_time_ms, "Min millisecs to scrub per txg");
module_param(zfs_free_min_time_ms, int, 0644);
MODULE_PARM_DESC(zfs_free_min_time_ms, "Min millisecs to free per txg");
module_param(zfs_resilver_min_time_ms, int, 0644);
MODULE_PARM_DESC(zfs_resilver_min_time_ms, "Min millisecs to resilver per txg");
module_param(zfs_no_scrub_io, int, 0644);
MODULE_PARM_DESC(zfs_no_scrub_io, "Set to disable scrub I/O");
module_param(zfs_no_scrub_prefetch, int, 0644);
MODULE_PARM_DESC(zfs_no_scrub_prefetch, "Set to disable scrub prefetching");
/* CSTYLED */
module_param(zfs_free_max_blocks, ulong, 0644);
MODULE_PARM_DESC(zfs_free_max_blocks, "Max number of blocks freed in one txg");
module_param(zfs_free_bpobj_enabled, int, 0644);
MODULE_PARM_DESC(zfs_free_bpobj_enabled, "Enable processing of the free_bpobj");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
#endif