mirror_zfs/module/zfs/Makefile.in

104 lines
5.1 KiB
Makefile
Raw Normal View History

MODULE := zfs
EXTRA_CFLAGS = $(ZFS_MODULE_CFLAGS) @KERNELCPPFLAGS@
obj-$(CONFIG_ZFS) := $(MODULE).o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/arc.o
$(MODULE)-objs += @top_srcdir@/module/zfs/blkptr.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/bplist.o
$(MODULE)-objs += @top_srcdir@/module/zfs/bpobj.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dbuf.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dbuf_stats.o
$(MODULE)-objs += @top_srcdir@/module/zfs/bptree.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/ddt.o
$(MODULE)-objs += @top_srcdir@/module/zfs/ddt_zap.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dmu.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dmu_diff.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dmu_object.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dmu_objset.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dmu_send.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dmu_traverse.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dmu_tx.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dmu_zfetch.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dnode.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dnode_sync.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_dataset.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_deadlist.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_deleg.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_bookmark.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_dir.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_pool.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_prop.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_scan.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_synctask.o
$(MODULE)-objs += @top_srcdir@/module/zfs/fm.o
$(MODULE)-objs += @top_srcdir@/module/zfs/gzip.o
$(MODULE)-objs += @top_srcdir@/module/zfs/lzjb.o
$(MODULE)-objs += @top_srcdir@/module/zfs/lz4.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/metaslab.o
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/range_tree.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/refcount.o
$(MODULE)-objs += @top_srcdir@/module/zfs/rrwlock.o
$(MODULE)-objs += @top_srcdir@/module/zfs/sa.o
$(MODULE)-objs += @top_srcdir@/module/zfs/sha256.o
$(MODULE)-objs += @top_srcdir@/module/zfs/spa.o
$(MODULE)-objs += @top_srcdir@/module/zfs/spa_boot.o
$(MODULE)-objs += @top_srcdir@/module/zfs/spa_config.o
$(MODULE)-objs += @top_srcdir@/module/zfs/spa_errlog.o
$(MODULE)-objs += @top_srcdir@/module/zfs/spa_history.o
$(MODULE)-objs += @top_srcdir@/module/zfs/spa_misc.o
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-07 03:09:05 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/spa_stats.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/space_map.o
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-02 01:25:53 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/space_reftree.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/txg.o
$(MODULE)-objs += @top_srcdir@/module/zfs/uberblock.o
$(MODULE)-objs += @top_srcdir@/module/zfs/unique.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_cache.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_disk.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_file.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_label.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_mirror.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_missing.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_queue.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_raidz.o
$(MODULE)-objs += @top_srcdir@/module/zfs/vdev_root.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zap.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zap_leaf.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zap_micro.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfeature.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfeature_common.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_acl.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_byteswap.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_ctldir.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_debug.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_dir.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_fm.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_fuid.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_ioctl.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_log.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_onexit.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_replay.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_rlock.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_sa.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_vfsops.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_vnops.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zfs_znode.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zil.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zio.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zio_checksum.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zio_compress.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zio_inject.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zle.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zpl_ctldir.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zpl_export.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zpl_file.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zpl_inode.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zpl_super.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zpl_xattr.o
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-05 00:26:23 +04:00
$(MODULE)-objs += @top_srcdir@/module/zfs/zrlock.o
$(MODULE)-objs += @top_srcdir@/module/zfs/zvol.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_destroy.o
$(MODULE)-objs += @top_srcdir@/module/zfs/dsl_userhold.o