mirror_zfs/include/sys/ddt.h

416 lines
14 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2016 by Delphix. All rights reserved.
* Copyright (c) 2023, Klara Inc.
*/
#ifndef _SYS_DDT_H
#define _SYS_DDT_H
#include <sys/sysmacros.h>
#include <sys/types.h>
#include <sys/fs/zfs.h>
#include <sys/zio.h>
#include <sys/dmu.h>
#ifdef __cplusplus
extern "C" {
#endif
struct abd;
ddt: add FDT feature and support for legacy and new on-disk formats This is the supporting infrastructure for the upcoming dedup features. Traditionally, dedup objects live directly in the MOS root. While their details vary (checksum, type and class), they are all the same "kind" of thing - a store of dedup entries. The new features are more varied than that, and are better thought of as a set of related stores for the overall state of a dedup table. This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will cause new DDTs to be created as a ZAP in the MOS root, named DDT-<checksum>. The is used as the root object for the normal type/class store objects, but will also be a place for any storage required by new features. This commit adds two new fields to ddt_t, for version and flags. These are intended to describe the structure and features of the overall dedup table, and are stored as-is in the DDT root. In this commit, flags are always zero, but the intent is that they can be used to hang optional logic or state onto for new dedup features. Version is always 1. For a "legacy" dedup table, where no DDT root directory exists, the version will be 0. ddt_configure() is expected to determine the version and flags features currently in operation based on whether or not the fast_dedup feature is enabled, and from what's available on disk. In this way, its possible to support both old and new tables. This also provides a migration path. A legacy setup can be upgraded to FDT by creating the DDT root ZAP, moving the existing objects into it, and setting version and flags appropriately. There's no support for that here, but it would be straightforward to add later and allows the possibility that newer features could be applied to existing dedup tables. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15892
2023-06-20 05:06:13 +03:00
/*
* DDT-wide feature flags. These are set in ddt_flags by ddt_configure().
*/
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
#define DDT_FLAG_FLAT (1 << 0) /* single extensible phys */
ddt: dedup log Adds a log/journal to dedup. At the end of txg, instead of writing the entry directly to the ZAP, instead its adding to an in-memory tree and appended to an on-disk object. The on-disk object is only read at import, to reload the in-memory tree. Lookups first go the the log tree before going to the ZAP, so recently-used entries will remain close by in memory. This vastly reduces overhead from dedup IO, as it will not have to do so many read/update/write cycles on ZAP leaf nodes. A flushing facility is added at end of txg, to push logged entries out to the ZAP. There's actually two separate "logs" (in-memory tree and on-disk object), one active (recieving updated entries) and one flushing (writing out to disk). These are swapped (ie flushing begins) based on memory used by the in-memory log trees and time since we last flushed something. The flushing facility monitors the amount of entries coming in and being flushed out, and calibrates itself to try to flush enough each txg to keep up with the ingest rate without competing too much with other IO. Multiple tuneables are provided to control the flushing facility. All the histograms and stats are update to accomodate the log as a separate entry store. zdb gains knowledge of how to count them and dump them. Documentation included! Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-22 10:46:22 +03:00
#define DDT_FLAG_LOG (1 << 1) /* dedup log (journal) */
#define DDT_FLAG_MASK (DDT_FLAG_FLAT|DDT_FLAG_LOG)
ddt: add FDT feature and support for legacy and new on-disk formats This is the supporting infrastructure for the upcoming dedup features. Traditionally, dedup objects live directly in the MOS root. While their details vary (checksum, type and class), they are all the same "kind" of thing - a store of dedup entries. The new features are more varied than that, and are better thought of as a set of related stores for the overall state of a dedup table. This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will cause new DDTs to be created as a ZAP in the MOS root, named DDT-<checksum>. The is used as the root object for the normal type/class store objects, but will also be a place for any storage required by new features. This commit adds two new fields to ddt_t, for version and flags. These are intended to describe the structure and features of the overall dedup table, and are stored as-is in the DDT root. In this commit, flags are always zero, but the intent is that they can be used to hang optional logic or state onto for new dedup features. Version is always 1. For a "legacy" dedup table, where no DDT root directory exists, the version will be 0. ddt_configure() is expected to determine the version and flags features currently in operation based on whether or not the fast_dedup feature is enabled, and from what's available on disk. In this way, its possible to support both old and new tables. This also provides a migration path. A legacy setup can be upgraded to FDT by creating the DDT root ZAP, moving the existing objects into it, and setting version and flags appropriately. There's no support for that here, but it would be straightforward to add later and allows the possibility that newer features could be applied to existing dedup tables. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15892
2023-06-20 05:06:13 +03:00
/*
* DDT on-disk storage object types. Each one corresponds to specific
* implementation, see ddt_ops_t. The value itself is not stored on disk.
*
* When searching for an entry, objects types will be searched in this order.
*
* Note that DDT_TYPES is used as the "no type" for new entries that have not
* yet been written to a storage object.
*/
typedef enum {
DDT_TYPE_ZAP = 0, /* ZAP storage object, ddt_zap */
DDT_TYPES
} ddt_type_t;
_Static_assert(DDT_TYPES <= UINT8_MAX,
"ddt_type_t must fit in a uint8_t");
/* New and updated entries recieve this type, see ddt_sync_entry() */
#define DDT_TYPE_DEFAULT (DDT_TYPE_ZAP)
/*
* DDT storage classes. Each class has a separate storage object for each type.
* The value itself is not stored on disk.
*
* When search for an entry, object classes will be searched in this order.
*
* Note that DDT_CLASSES is used as the "no class" for new entries that have not
* yet been written to a storage object.
*/
typedef enum {
DDT_CLASS_DITTO = 0, /* entry has ditto blocks (obsolete) */
DDT_CLASS_DUPLICATE, /* entry has multiple references */
DDT_CLASS_UNIQUE, /* entry has a single reference */
DDT_CLASSES
} ddt_class_t;
_Static_assert(DDT_CLASSES < UINT8_MAX,
"ddt_class_t must fit in a uint8_t");
/*
* The "key" part of an on-disk entry. This is the unique "name" for a block,
* that is, that parts of the block pointer that will always be the same for
* the same data.
*/
typedef struct {
zio_cksum_t ddk_cksum; /* 256-bit block checksum */
/*
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
* Encoded with logical & physical size, encryption, and compression,
* as follows:
* +-------+-------+-------+-------+-------+-------+-------+-------+
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
* | 0 | 0 | 0 |X| comp| PSIZE | LSIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
*/
uint64_t ddk_prop;
} ddt_key_t;
/*
* Macros for accessing parts of a ddt_key_t. These are similar to their BP_*
* counterparts.
*/
#define DDK_GET_LSIZE(ddk) \
BF64_GET_SB((ddk)->ddk_prop, 0, 16, SPA_MINBLOCKSHIFT, 1)
#define DDK_SET_LSIZE(ddk, x) \
BF64_SET_SB((ddk)->ddk_prop, 0, 16, SPA_MINBLOCKSHIFT, 1, x)
#define DDK_GET_PSIZE(ddk) \
BF64_GET_SB((ddk)->ddk_prop, 16, 16, SPA_MINBLOCKSHIFT, 1)
#define DDK_SET_PSIZE(ddk, x) \
BF64_SET_SB((ddk)->ddk_prop, 16, 16, SPA_MINBLOCKSHIFT, 1, x)
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
#define DDK_GET_COMPRESS(ddk) BF64_GET((ddk)->ddk_prop, 32, 7)
#define DDK_SET_COMPRESS(ddk, x) BF64_SET((ddk)->ddk_prop, 32, 7, x)
#define DDK_GET_CRYPT(ddk) BF64_GET((ddk)->ddk_prop, 39, 1)
#define DDK_SET_CRYPT(ddk, x) BF64_SET((ddk)->ddk_prop, 39, 1, x)
/*
* The "value" part for an on-disk entry. These are the "physical"
* characteristics of the stored block, such as its location on disk (DVAs),
* birth txg and ref count.
*
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
* The "traditional" entry has an array of four, one for each number of DVAs
* (copies= property) and another for additional "ditto" copies. Users of the
* traditional struct will specify the variant (index) of the one they want.
*
* The newer "flat" entry has only a single form that is specified using the
* DDT_PHYS_FLAT variant.
*
* Since the value size varies, use one of the size macros when interfacing
* with the ddt zap.
*/
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
#define DDT_PHYS_MAX (4)
/*
* Note - this can be used in a flexible array and allocated for
* a specific size (ddp_trad or ddp_flat). So be careful not to
* copy using "=" assignment but instead use ddt_phys_copy().
*/
typedef union {
/*
* Traditional physical payload value for DDT zap (256 bytes)
*/
struct {
dva_t ddp_dva[SPA_DVAS_PER_BP];
uint64_t ddp_refcnt;
uint64_t ddp_phys_birth;
} ddp_trad[DDT_PHYS_MAX];
/*
* Flat physical payload value for DDT zap (72 bytes)
*/
struct {
dva_t ddp_dva[SPA_DVAS_PER_BP];
uint64_t ddp_refcnt;
uint64_t ddp_phys_birth; /* txg based from BP */
uint64_t ddp_class_start; /* in realtime seconds */
} ddp_flat;
} ddt_univ_phys_t;
/*
* This enum denotes which variant of a ddt_univ_phys_t to target. For
* a traditional DDT entry, it represents the indexes into the ddp_trad
* array. Any consumer of a ddt_univ_phys_t needs to know which variant
* is being targeted.
*
* Note, we no longer generate new DDT_PHYS_DITTO-type blocks. However,
* we maintain the ability to free existing dedup-ditto blocks.
*/
typedef enum {
DDT_PHYS_DITTO = 0,
DDT_PHYS_SINGLE = 1,
DDT_PHYS_DOUBLE = 2,
DDT_PHYS_TRIPLE = 3,
DDT_PHYS_FLAT = 4,
DDT_PHYS_NONE = 5
} ddt_phys_variant_t;
#define DDT_PHYS_VARIANT(ddt, p) \
(ASSERT((p) < DDT_PHYS_NONE), \
((ddt)->ddt_flags & DDT_FLAG_FLAT ? DDT_PHYS_FLAT : (p)))
#define DDT_TRAD_PHYS_SIZE sizeof (((ddt_univ_phys_t *)0)->ddp_trad)
#define DDT_FLAT_PHYS_SIZE sizeof (((ddt_univ_phys_t *)0)->ddp_flat)
#define _DDT_PHYS_SWITCH(ddt, flat, trad) \
(((ddt)->ddt_flags & DDT_FLAG_FLAT) ? (flat) : (trad))
#define DDT_PHYS_SIZE(ddt) _DDT_PHYS_SWITCH(ddt, \
DDT_FLAT_PHYS_SIZE, DDT_TRAD_PHYS_SIZE)
#define DDT_NPHYS(ddt) _DDT_PHYS_SWITCH(ddt, 1, DDT_PHYS_MAX)
#define DDT_PHYS_FOR_COPIES(ddt, p) _DDT_PHYS_SWITCH(ddt, 0, p)
#define DDT_PHYS_IS_DITTO(ddt, p) _DDT_PHYS_SWITCH(ddt, 0, (p == 0))
/*
* A "live" entry, holding changes to an entry made this txg, and other data to
* support loading, updating and repairing the entry.
*/
/* State flags for dde_flags */
#define DDE_FLAG_LOADED (1 << 0) /* entry ready for use */
#define DDE_FLAG_OVERQUOTA (1 << 1) /* entry unusable, no space */
ddt: dedup log Adds a log/journal to dedup. At the end of txg, instead of writing the entry directly to the ZAP, instead its adding to an in-memory tree and appended to an on-disk object. The on-disk object is only read at import, to reload the in-memory tree. Lookups first go the the log tree before going to the ZAP, so recently-used entries will remain close by in memory. This vastly reduces overhead from dedup IO, as it will not have to do so many read/update/write cycles on ZAP leaf nodes. A flushing facility is added at end of txg, to push logged entries out to the ZAP. There's actually two separate "logs" (in-memory tree and on-disk object), one active (recieving updated entries) and one flushing (writing out to disk). These are swapped (ie flushing begins) based on memory used by the in-memory log trees and time since we last flushed something. The flushing facility monitors the amount of entries coming in and being flushed out, and calibrates itself to try to flush enough each txg to keep up with the ingest rate without competing too much with other IO. Multiple tuneables are provided to control the flushing facility. All the histograms and stats are update to accomodate the log as a separate entry store. zdb gains knowledge of how to count them and dump them. Documentation included! Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-22 10:46:22 +03:00
#define DDE_FLAG_LOGGED (1 << 2) /* loaded from log */
/*
* Additional data to support entry update or repair. This is fixed size
* because its relatively rarely used.
*/
typedef struct {
/* copy of data after a repair read, to be rewritten */
abd_t *dde_repair_abd;
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
/* original phys contents before update, for error handling */
ddt_univ_phys_t dde_orig_phys;
/* in-flight update IOs */
zio_t *dde_lead_zio[DDT_PHYS_MAX];
} ddt_entry_io_t;
typedef struct {
/* key must be first for ddt_key_compare */
ddt_key_t dde_key; /* ddt_tree key */
avl_node_t dde_node; /* ddt_tree_node */
/* storage type and class the entry was loaded from */
ddt_type_t dde_type;
ddt_class_t dde_class;
uint8_t dde_flags; /* load state flags */
kcondvar_t dde_cv; /* signaled when load completes */
uint64_t dde_waiters; /* count of waiters on dde_cv */
ddt_entry_io_t *dde_io; /* IO support, when required */
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
ddt_univ_phys_t dde_phys[]; /* flexible -- allocated size varies */
} ddt_entry_t;
/*
* A lightweight entry is for short-lived or transient uses, like iterating or
* inspecting, when you don't care where it came from.
*/
typedef struct {
ddt_key_t ddlwe_key;
ddt_type_t ddlwe_type;
ddt_class_t ddlwe_class;
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
ddt_univ_phys_t ddlwe_phys;
} ddt_lightweight_entry_t;
ddt: dedup log Adds a log/journal to dedup. At the end of txg, instead of writing the entry directly to the ZAP, instead its adding to an in-memory tree and appended to an on-disk object. The on-disk object is only read at import, to reload the in-memory tree. Lookups first go the the log tree before going to the ZAP, so recently-used entries will remain close by in memory. This vastly reduces overhead from dedup IO, as it will not have to do so many read/update/write cycles on ZAP leaf nodes. A flushing facility is added at end of txg, to push logged entries out to the ZAP. There's actually two separate "logs" (in-memory tree and on-disk object), one active (recieving updated entries) and one flushing (writing out to disk). These are swapped (ie flushing begins) based on memory used by the in-memory log trees and time since we last flushed something. The flushing facility monitors the amount of entries coming in and being flushed out, and calibrates itself to try to flush enough each txg to keep up with the ingest rate without competing too much with other IO. Multiple tuneables are provided to control the flushing facility. All the histograms and stats are update to accomodate the log as a separate entry store. zdb gains knowledge of how to count them and dump them. Documentation included! Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-22 10:46:22 +03:00
/*
* In-core DDT log. A separate struct to make it easier to switch between the
* appending and flushing logs.
*/
typedef struct {
avl_tree_t ddl_tree; /* logged entries */
uint32_t ddl_flags; /* flags for this log */
uint64_t ddl_object; /* log object id */
uint64_t ddl_length; /* on-disk log size */
uint64_t ddl_first_txg; /* txg log became active */
ddt_key_t ddl_checkpoint; /* last checkpoint */
} ddt_log_t;
/*
* In-core DDT object. This covers all entries and stats for a the whole pool
* for a given checksum type.
*/
typedef struct {
kmutex_t ddt_lock; /* protects changes to all fields */
avl_tree_t ddt_tree; /* "live" (changed) entries this txg */
ddt: dedup log Adds a log/journal to dedup. At the end of txg, instead of writing the entry directly to the ZAP, instead its adding to an in-memory tree and appended to an on-disk object. The on-disk object is only read at import, to reload the in-memory tree. Lookups first go the the log tree before going to the ZAP, so recently-used entries will remain close by in memory. This vastly reduces overhead from dedup IO, as it will not have to do so many read/update/write cycles on ZAP leaf nodes. A flushing facility is added at end of txg, to push logged entries out to the ZAP. There's actually two separate "logs" (in-memory tree and on-disk object), one active (recieving updated entries) and one flushing (writing out to disk). These are swapped (ie flushing begins) based on memory used by the in-memory log trees and time since we last flushed something. The flushing facility monitors the amount of entries coming in and being flushed out, and calibrates itself to try to flush enough each txg to keep up with the ingest rate without competing too much with other IO. Multiple tuneables are provided to control the flushing facility. All the histograms and stats are update to accomodate the log as a separate entry store. zdb gains knowledge of how to count them and dump them. Documentation included! Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-22 10:46:22 +03:00
avl_tree_t ddt_log_tree; /* logged entries */
ddt: dedup log Adds a log/journal to dedup. At the end of txg, instead of writing the entry directly to the ZAP, instead its adding to an in-memory tree and appended to an on-disk object. The on-disk object is only read at import, to reload the in-memory tree. Lookups first go the the log tree before going to the ZAP, so recently-used entries will remain close by in memory. This vastly reduces overhead from dedup IO, as it will not have to do so many read/update/write cycles on ZAP leaf nodes. A flushing facility is added at end of txg, to push logged entries out to the ZAP. There's actually two separate "logs" (in-memory tree and on-disk object), one active (recieving updated entries) and one flushing (writing out to disk). These are swapped (ie flushing begins) based on memory used by the in-memory log trees and time since we last flushed something. The flushing facility monitors the amount of entries coming in and being flushed out, and calibrates itself to try to flush enough each txg to keep up with the ingest rate without competing too much with other IO. Multiple tuneables are provided to control the flushing facility. All the histograms and stats are update to accomodate the log as a separate entry store. zdb gains knowledge of how to count them and dump them. Documentation included! Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-22 10:46:22 +03:00
avl_tree_t ddt_repair_tree; /* entries being repaired */
ddt_log_t ddt_log[2]; /* active/flushing logs */
ddt_log_t *ddt_log_active; /* pointers into ddt_log */
ddt_log_t *ddt_log_flushing; /* swapped when flush starts */
hrtime_t ddt_flush_start; /* log flush start this txg */
uint32_t ddt_flush_pass; /* log flush pass this txg */
int32_t ddt_flush_count; /* entries flushed this txg */
int32_t ddt_flush_min; /* min rem entries to flush */
int32_t ddt_log_ingest_rate; /* rolling log ingest rate */
int32_t ddt_log_flush_rate; /* rolling log flush rate */
int32_t ddt_log_flush_time_rate; /* avg time spent flushing */
ddt: add FDT feature and support for legacy and new on-disk formats This is the supporting infrastructure for the upcoming dedup features. Traditionally, dedup objects live directly in the MOS root. While their details vary (checksum, type and class), they are all the same "kind" of thing - a store of dedup entries. The new features are more varied than that, and are better thought of as a set of related stores for the overall state of a dedup table. This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will cause new DDTs to be created as a ZAP in the MOS root, named DDT-<checksum>. The is used as the root object for the normal type/class store objects, but will also be a place for any storage required by new features. This commit adds two new fields to ddt_t, for version and flags. These are intended to describe the structure and features of the overall dedup table, and are stored as-is in the DDT root. In this commit, flags are always zero, but the intent is that they can be used to hang optional logic or state onto for new dedup features. Version is always 1. For a "legacy" dedup table, where no DDT root directory exists, the version will be 0. ddt_configure() is expected to determine the version and flags features currently in operation based on whether or not the fast_dedup feature is enabled, and from what's available on disk. In this way, its possible to support both old and new tables. This also provides a migration path. A legacy setup can be upgraded to FDT by creating the DDT root ZAP, moving the existing objects into it, and setting version and flags appropriately. There's no support for that here, but it would be straightforward to add later and allows the possibility that newer features could be applied to existing dedup tables. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15892
2023-06-20 05:06:13 +03:00
uint64_t ddt_flush_force_txg; /* flush hard before this txg */
kstat_t *ddt_ksp; /* kstats context */
ddt: add FDT feature and support for legacy and new on-disk formats This is the supporting infrastructure for the upcoming dedup features. Traditionally, dedup objects live directly in the MOS root. While their details vary (checksum, type and class), they are all the same "kind" of thing - a store of dedup entries. The new features are more varied than that, and are better thought of as a set of related stores for the overall state of a dedup table. This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will cause new DDTs to be created as a ZAP in the MOS root, named DDT-<checksum>. The is used as the root object for the normal type/class store objects, but will also be a place for any storage required by new features. This commit adds two new fields to ddt_t, for version and flags. These are intended to describe the structure and features of the overall dedup table, and are stored as-is in the DDT root. In this commit, flags are always zero, but the intent is that they can be used to hang optional logic or state onto for new dedup features. Version is always 1. For a "legacy" dedup table, where no DDT root directory exists, the version will be 0. ddt_configure() is expected to determine the version and flags features currently in operation based on whether or not the fast_dedup feature is enabled, and from what's available on disk. In this way, its possible to support both old and new tables. This also provides a migration path. A legacy setup can be upgraded to FDT by creating the DDT root ZAP, moving the existing objects into it, and setting version and flags appropriately. There's no support for that here, but it would be straightforward to add later and allows the possibility that newer features could be applied to existing dedup tables. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15892
2023-06-20 05:06:13 +03:00
enum zio_checksum ddt_checksum; /* checksum algorithm in use */
spa_t *ddt_spa; /* pool this ddt is on */
objset_t *ddt_os; /* ddt objset (always MOS) */
ddt: add FDT feature and support for legacy and new on-disk formats This is the supporting infrastructure for the upcoming dedup features. Traditionally, dedup objects live directly in the MOS root. While their details vary (checksum, type and class), they are all the same "kind" of thing - a store of dedup entries. The new features are more varied than that, and are better thought of as a set of related stores for the overall state of a dedup table. This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will cause new DDTs to be created as a ZAP in the MOS root, named DDT-<checksum>. The is used as the root object for the normal type/class store objects, but will also be a place for any storage required by new features. This commit adds two new fields to ddt_t, for version and flags. These are intended to describe the structure and features of the overall dedup table, and are stored as-is in the DDT root. In this commit, flags are always zero, but the intent is that they can be used to hang optional logic or state onto for new dedup features. Version is always 1. For a "legacy" dedup table, where no DDT root directory exists, the version will be 0. ddt_configure() is expected to determine the version and flags features currently in operation based on whether or not the fast_dedup feature is enabled, and from what's available on disk. In this way, its possible to support both old and new tables. This also provides a migration path. A legacy setup can be upgraded to FDT by creating the DDT root ZAP, moving the existing objects into it, and setting version and flags appropriately. There's no support for that here, but it would be straightforward to add later and allows the possibility that newer features could be applied to existing dedup tables. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15892
2023-06-20 05:06:13 +03:00
uint64_t ddt_dir_object; /* MOS dir holding ddt objects */
uint64_t ddt_version; /* DDT version */
uint64_t ddt_flags; /* FDT option flags */
/* per-type/per-class entry store objects */
uint64_t ddt_object[DDT_TYPES][DDT_CLASSES];
ddt: dedup log Adds a log/journal to dedup. At the end of txg, instead of writing the entry directly to the ZAP, instead its adding to an in-memory tree and appended to an on-disk object. The on-disk object is only read at import, to reload the in-memory tree. Lookups first go the the log tree before going to the ZAP, so recently-used entries will remain close by in memory. This vastly reduces overhead from dedup IO, as it will not have to do so many read/update/write cycles on ZAP leaf nodes. A flushing facility is added at end of txg, to push logged entries out to the ZAP. There's actually two separate "logs" (in-memory tree and on-disk object), one active (recieving updated entries) and one flushing (writing out to disk). These are swapped (ie flushing begins) based on memory used by the in-memory log trees and time since we last flushed something. The flushing facility monitors the amount of entries coming in and being flushed out, and calibrates itself to try to flush enough each txg to keep up with the ingest rate without competing too much with other IO. Multiple tuneables are provided to control the flushing facility. All the histograms and stats are update to accomodate the log as a separate entry store. zdb gains knowledge of how to count them and dump them. Documentation included! Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-22 10:46:22 +03:00
/* object ids for stored, logged and per-type/per-class stats */
uint64_t ddt_stat_object;
ddt: dedup log Adds a log/journal to dedup. At the end of txg, instead of writing the entry directly to the ZAP, instead its adding to an in-memory tree and appended to an on-disk object. The on-disk object is only read at import, to reload the in-memory tree. Lookups first go the the log tree before going to the ZAP, so recently-used entries will remain close by in memory. This vastly reduces overhead from dedup IO, as it will not have to do so many read/update/write cycles on ZAP leaf nodes. A flushing facility is added at end of txg, to push logged entries out to the ZAP. There's actually two separate "logs" (in-memory tree and on-disk object), one active (recieving updated entries) and one flushing (writing out to disk). These are swapped (ie flushing begins) based on memory used by the in-memory log trees and time since we last flushed something. The flushing facility monitors the amount of entries coming in and being flushed out, and calibrates itself to try to flush enough each txg to keep up with the ingest rate without competing too much with other IO. Multiple tuneables are provided to control the flushing facility. All the histograms and stats are update to accomodate the log as a separate entry store. zdb gains knowledge of how to count them and dump them. Documentation included! Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-22 10:46:22 +03:00
ddt_object_t ddt_log_stats;
ddt_object_t ddt_object_stats[DDT_TYPES][DDT_CLASSES];
/* type/class stats by power-2-sized referenced blocks */
ddt_histogram_t ddt_histogram[DDT_TYPES][DDT_CLASSES];
ddt_histogram_t ddt_histogram_cache[DDT_TYPES][DDT_CLASSES];
ddt: dedup log Adds a log/journal to dedup. At the end of txg, instead of writing the entry directly to the ZAP, instead its adding to an in-memory tree and appended to an on-disk object. The on-disk object is only read at import, to reload the in-memory tree. Lookups first go the the log tree before going to the ZAP, so recently-used entries will remain close by in memory. This vastly reduces overhead from dedup IO, as it will not have to do so many read/update/write cycles on ZAP leaf nodes. A flushing facility is added at end of txg, to push logged entries out to the ZAP. There's actually two separate "logs" (in-memory tree and on-disk object), one active (recieving updated entries) and one flushing (writing out to disk). These are swapped (ie flushing begins) based on memory used by the in-memory log trees and time since we last flushed something. The flushing facility monitors the amount of entries coming in and being flushed out, and calibrates itself to try to flush enough each txg to keep up with the ingest rate without competing too much with other IO. Multiple tuneables are provided to control the flushing facility. All the histograms and stats are update to accomodate the log as a separate entry store. zdb gains knowledge of how to count them and dump them. Documentation included! Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-22 10:46:22 +03:00
/* log stats power-2-sized referenced blocks */
ddt_histogram_t ddt_log_histogram;
} ddt_t;
/*
* In-core and on-disk bookmark for DDT walks. This is a cursor for ddt_walk(),
* and is stable across calls, even if the DDT is updated, the pool is
* restarted or loaded on another system, or OpenZFS is upgraded.
*/
typedef struct {
uint64_t ddb_class;
uint64_t ddb_type;
uint64_t ddb_checksum;
uint64_t ddb_cursor;
} ddt_bookmark_t;
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
extern void ddt_bp_fill(const ddt_univ_phys_t *ddp, ddt_phys_variant_t v,
blkptr_t *bp, uint64_t txg);
extern void ddt_bp_create(enum zio_checksum checksum, const ddt_key_t *ddk,
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
const ddt_univ_phys_t *ddp, ddt_phys_variant_t v, blkptr_t *bp);
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
extern void ddt_phys_extend(ddt_univ_phys_t *ddp, ddt_phys_variant_t v,
const blkptr_t *bp);
ddt: add "flat phys" feature Traditional dedup keeps a separate ddt_phys_t "type" for each possible count of DVAs (that is, copies=) parameter. Each of these are tracked independently of each other, and have their own set of DVAs. This leads to an (admittedly rare) situation where you can create as many as six copies of the data, by changing the copies= parameter between copying. This is both a waste of storage on disk, but also a waste of space in the stored DDT entries, since there never needs to be more than three DVAs to handle all possible values of copies=. This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the first ddt_phys_t is used. Each time a block is written with the dedup bit set, this single phys is checked to see if it has enough DVAs to fulfill the request. If it does, the block is filled with the saved DVAs as normal. If not, an adjusted write is issued to create as many extra copies as are needed to fulfill the request, which are then saved into the entry too. Because a single phys is no longer an all-or-nothing, but can be transitioning from fewer to more DVAs, the write path now has to keep a copy of the previous "known good" DVA set so we can revert to it in case an error occurs. zio_ddt_write() has been restructured and heavily commented to make it much easier to see what's happening. Backwards compatibility is maintained simply by allocating four ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys selection macros to check the flag. In the old arrangement, each number of copies gets a whole phys, so it will always have either zero or all necessary DVAs filled, with no in-between, so the old behaviour naturally falls out of the new code. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15893
2023-06-20 04:09:48 +03:00
extern void ddt_phys_copy(ddt_univ_phys_t *dst, const ddt_univ_phys_t *src,
ddt_phys_variant_t v);
extern void ddt_phys_clear(ddt_univ_phys_t *ddp, ddt_phys_variant_t v);
extern void ddt_phys_addref(ddt_univ_phys_t *ddp, ddt_phys_variant_t v);
extern uint64_t ddt_phys_decref(ddt_univ_phys_t *ddp, ddt_phys_variant_t v);
extern uint64_t ddt_phys_refcnt(const ddt_univ_phys_t *ddp,
ddt_phys_variant_t v);
extern ddt_phys_variant_t ddt_phys_select(const ddt_t *ddt,
const ddt_entry_t *dde, const blkptr_t *bp);
extern uint64_t ddt_phys_birth(const ddt_univ_phys_t *ddp,
ddt_phys_variant_t v);
extern int ddt_phys_dva_count(const ddt_univ_phys_t *ddp, ddt_phys_variant_t v,
boolean_t encrypted);
ddt: cleanup the stats & histogram code Both the API and the code were kinda mangled and I was really struggling to follow it. The worst offender was the old ddt_stat_add(); after fixing it up the rest of the changes are mostly knock-on effects and targets of opportunity. Note that the old ddt_stat_add() was safe against overflows - it could produce crazy numbers, but the compiler wouldn't do anything stupid. The assertions in ddt_stat_sub() go a lot of the way to protecting against this; getting in a position where overflows are a problem is definitely a programming error. Also expanding ddt_stat_add() and ddt_histogram_empty() produces less efficient assembly. I'm not bothered about this right now though; these should not be hot functions, and if they are we'll optimise them later. If we have to go back to the old form, we'll comment it like crazy. Finally, I've removed the assertion that the bucket will never be negative, as it will soon be possible to have entries with zero refcounts: an entry for a block that is no longer on the pool, but is on the log waiting to be synced out. It might be better to have a separate bucket for these, since they're still using real space on disk, but ultimately these stats are driving UI, and for now I've chosen to keep them matching how they've looked in the past, as well as match the operators mental model - pool usage is managed elsewhere. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-15 10:19:41 +03:00
extern void ddt_histogram_add_entry(ddt_t *ddt, ddt_histogram_t *ddh,
const ddt_lightweight_entry_t *ddlwe);
extern void ddt_histogram_sub_entry(ddt_t *ddt, ddt_histogram_t *ddh,
const ddt_lightweight_entry_t *ddlwe);
extern void ddt_histogram_add(ddt_histogram_t *dst, const ddt_histogram_t *src);
ddt: cleanup the stats & histogram code Both the API and the code were kinda mangled and I was really struggling to follow it. The worst offender was the old ddt_stat_add(); after fixing it up the rest of the changes are mostly knock-on effects and targets of opportunity. Note that the old ddt_stat_add() was safe against overflows - it could produce crazy numbers, but the compiler wouldn't do anything stupid. The assertions in ddt_stat_sub() go a lot of the way to protecting against this; getting in a position where overflows are a problem is definitely a programming error. Also expanding ddt_stat_add() and ddt_histogram_empty() produces less efficient assembly. I'm not bothered about this right now though; these should not be hot functions, and if they are we'll optimise them later. If we have to go back to the old form, we'll comment it like crazy. Finally, I've removed the assertion that the bucket will never be negative, as it will soon be possible to have entries with zero refcounts: an entry for a block that is no longer on the pool, but is on the log waiting to be synced out. It might be better to have a separate bucket for these, since they're still using real space on disk, but ultimately these stats are driving UI, and for now I've chosen to keep them matching how they've looked in the past, as well as match the operators mental model - pool usage is managed elsewhere. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-15 10:19:41 +03:00
extern void ddt_histogram_total(ddt_stat_t *dds, const ddt_histogram_t *ddh);
extern boolean_t ddt_histogram_empty(const ddt_histogram_t *ddh);
ddt: cleanup the stats & histogram code Both the API and the code were kinda mangled and I was really struggling to follow it. The worst offender was the old ddt_stat_add(); after fixing it up the rest of the changes are mostly knock-on effects and targets of opportunity. Note that the old ddt_stat_add() was safe against overflows - it could produce crazy numbers, but the compiler wouldn't do anything stupid. The assertions in ddt_stat_sub() go a lot of the way to protecting against this; getting in a position where overflows are a problem is definitely a programming error. Also expanding ddt_stat_add() and ddt_histogram_empty() produces less efficient assembly. I'm not bothered about this right now though; these should not be hot functions, and if they are we'll optimise them later. If we have to go back to the old form, we'll comment it like crazy. Finally, I've removed the assertion that the bucket will never be negative, as it will soon be possible to have entries with zero refcounts: an entry for a block that is no longer on the pool, but is on the log waiting to be synced out. It might be better to have a separate bucket for these, since they're still using real space on disk, but ultimately these stats are driving UI, and for now I've chosen to keep them matching how they've looked in the past, as well as match the operators mental model - pool usage is managed elsewhere. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc. Closes #15895
2023-06-15 10:19:41 +03:00
extern void ddt_get_dedup_object_stats(spa_t *spa, ddt_object_t *ddo);
extern uint64_t ddt_get_ddt_dsize(spa_t *spa);
extern void ddt_get_dedup_histogram(spa_t *spa, ddt_histogram_t *ddh);
extern void ddt_get_dedup_stats(spa_t *spa, ddt_stat_t *dds_total);
extern uint64_t ddt_get_dedup_dspace(spa_t *spa);
extern uint64_t ddt_get_pool_dedup_ratio(spa_t *spa);
extern int ddt_get_pool_dedup_cached(spa_t *spa, uint64_t *psize);
extern ddt_t *ddt_select(spa_t *spa, const blkptr_t *bp);
extern void ddt_enter(ddt_t *ddt);
extern void ddt_exit(ddt_t *ddt);
extern void ddt_init(void);
extern void ddt_fini(void);
extern ddt_entry_t *ddt_lookup(ddt_t *ddt, const blkptr_t *bp);
extern void ddt_remove(ddt_t *ddt, ddt_entry_t *dde);
extern void ddt_prefetch(spa_t *spa, const blkptr_t *bp);
extern void ddt_prefetch_all(spa_t *spa);
extern boolean_t ddt_class_contains(spa_t *spa, ddt_class_t max_class,
const blkptr_t *bp);
extern void ddt_alloc_entry_io(ddt_entry_t *dde);
extern ddt_entry_t *ddt_repair_start(ddt_t *ddt, const blkptr_t *bp);
extern void ddt_repair_done(ddt_t *ddt, ddt_entry_t *dde);
extern int ddt_key_compare(const void *x1, const void *x2);
extern void ddt_create(spa_t *spa);
extern int ddt_load(spa_t *spa);
extern void ddt_unload(spa_t *spa);
extern void ddt_sync(spa_t *spa, uint64_t txg);
extern void ddt_walk_init(spa_t *spa, uint64_t txg);
extern boolean_t ddt_walk_ready(spa_t *spa);
extern int ddt_walk(spa_t *spa, ddt_bookmark_t *ddb,
ddt_lightweight_entry_t *ddlwe);
extern boolean_t ddt_addref(spa_t *spa, const blkptr_t *bp);
extern int ddt_prune_unique_entries(spa_t *spa, zpool_ddt_prune_unit_t unit,
uint64_t amount);
#ifdef __cplusplus
}
#endif
#endif /* _SYS_DDT_H */