mirror_zfs/module/zfs/zfs_vfsops.c

2365 lines
60 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012, 2015 by Delphix. All rights reserved.
2008-11-20 23:01:55 +03:00
*/
/* Portions Copyright 2010 Robert Milkowski */
2008-11-20 23:01:55 +03:00
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysmacros.h>
#include <sys/kmem.h>
#include <sys/pathname.h>
#include <sys/vnode.h>
#include <sys/vfs.h>
#include <sys/vfs_opreg.h>
#include <sys/mntent.h>
#include <sys/mount.h>
#include <sys/cmn_err.h>
#include "fs/fs_subr.h"
#include <sys/zfs_znode.h>
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
#include <sys/zfs_vnops.h>
2008-11-20 23:01:55 +03:00
#include <sys/zfs_dir.h>
#include <sys/zil.h>
#include <sys/fs/zfs.h>
#include <sys/dmu.h>
#include <sys/dsl_prop.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_deleg.h>
#include <sys/spa.h>
#include <sys/zap.h>
#include <sys/sa.h>
#include <sys/sa_impl.h>
2008-11-20 23:01:55 +03:00
#include <sys/varargs.h>
#include <sys/policy.h>
#include <sys/atomic.h>
#include <sys/mkdev.h>
#include <sys/modctl.h>
#include <sys/refstr.h>
#include <sys/zfs_ioctl.h>
#include <sys/zfs_ctldir.h>
2008-11-20 23:01:55 +03:00
#include <sys/zfs_fuid.h>
#include <sys/bootconf.h>
#include <sys/sunddi.h>
#include <sys/dnlc.h>
#include <sys/dmu_objset.h>
#include <sys/spa_boot.h>
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
#include <sys/zpl.h>
#include "zfs_comutil.h"
2008-11-20 23:01:55 +03:00
enum {
TOKEN_RO,
TOKEN_RW,
TOKEN_SETUID,
TOKEN_NOSETUID,
TOKEN_EXEC,
TOKEN_NOEXEC,
TOKEN_DEVICES,
TOKEN_NODEVICES,
TOKEN_DIRXATTR,
TOKEN_SAXATTR,
TOKEN_XATTR,
TOKEN_NOXATTR,
TOKEN_ATIME,
TOKEN_NOATIME,
TOKEN_RELATIME,
TOKEN_NORELATIME,
TOKEN_NBMAND,
TOKEN_NONBMAND,
TOKEN_MNTPOINT,
TOKEN_LAST,
};
static const match_table_t zpl_tokens = {
{ TOKEN_RO, MNTOPT_RO },
{ TOKEN_RW, MNTOPT_RW },
{ TOKEN_SETUID, MNTOPT_SETUID },
{ TOKEN_NOSETUID, MNTOPT_NOSETUID },
{ TOKEN_EXEC, MNTOPT_EXEC },
{ TOKEN_NOEXEC, MNTOPT_NOEXEC },
{ TOKEN_DEVICES, MNTOPT_DEVICES },
{ TOKEN_NODEVICES, MNTOPT_NODEVICES },
{ TOKEN_DIRXATTR, MNTOPT_DIRXATTR },
{ TOKEN_SAXATTR, MNTOPT_SAXATTR },
{ TOKEN_XATTR, MNTOPT_XATTR },
{ TOKEN_NOXATTR, MNTOPT_NOXATTR },
{ TOKEN_ATIME, MNTOPT_ATIME },
{ TOKEN_NOATIME, MNTOPT_NOATIME },
{ TOKEN_RELATIME, MNTOPT_RELATIME },
{ TOKEN_NORELATIME, MNTOPT_NORELATIME },
{ TOKEN_NBMAND, MNTOPT_NBMAND },
{ TOKEN_NONBMAND, MNTOPT_NONBMAND },
{ TOKEN_MNTPOINT, MNTOPT_MNTPOINT "=%s" },
{ TOKEN_LAST, NULL },
};
static void
zfsvfs_vfs_free(vfs_t *vfsp)
{
if (vfsp != NULL) {
if (vfsp->vfs_mntpoint != NULL)
strfree(vfsp->vfs_mntpoint);
kmem_free(vfsp, sizeof (vfs_t));
}
}
static int
zfsvfs_parse_option(char *option, int token, substring_t *args, vfs_t *vfsp)
{
switch (token) {
case TOKEN_RO:
vfsp->vfs_readonly = B_TRUE;
vfsp->vfs_do_readonly = B_TRUE;
break;
case TOKEN_RW:
vfsp->vfs_readonly = B_FALSE;
vfsp->vfs_do_readonly = B_TRUE;
break;
case TOKEN_SETUID:
vfsp->vfs_setuid = B_TRUE;
vfsp->vfs_do_setuid = B_TRUE;
break;
case TOKEN_NOSETUID:
vfsp->vfs_setuid = B_FALSE;
vfsp->vfs_do_setuid = B_TRUE;
break;
case TOKEN_EXEC:
vfsp->vfs_exec = B_TRUE;
vfsp->vfs_do_exec = B_TRUE;
break;
case TOKEN_NOEXEC:
vfsp->vfs_exec = B_FALSE;
vfsp->vfs_do_exec = B_TRUE;
break;
case TOKEN_DEVICES:
vfsp->vfs_devices = B_TRUE;
vfsp->vfs_do_devices = B_TRUE;
break;
case TOKEN_NODEVICES:
vfsp->vfs_devices = B_FALSE;
vfsp->vfs_do_devices = B_TRUE;
break;
case TOKEN_DIRXATTR:
vfsp->vfs_xattr = ZFS_XATTR_DIR;
vfsp->vfs_do_xattr = B_TRUE;
break;
case TOKEN_SAXATTR:
vfsp->vfs_xattr = ZFS_XATTR_SA;
vfsp->vfs_do_xattr = B_TRUE;
break;
case TOKEN_XATTR:
vfsp->vfs_xattr = ZFS_XATTR_DIR;
vfsp->vfs_do_xattr = B_TRUE;
break;
case TOKEN_NOXATTR:
vfsp->vfs_xattr = ZFS_XATTR_OFF;
vfsp->vfs_do_xattr = B_TRUE;
break;
case TOKEN_ATIME:
vfsp->vfs_atime = B_TRUE;
vfsp->vfs_do_atime = B_TRUE;
break;
case TOKEN_NOATIME:
vfsp->vfs_atime = B_FALSE;
vfsp->vfs_do_atime = B_TRUE;
break;
case TOKEN_RELATIME:
vfsp->vfs_relatime = B_TRUE;
vfsp->vfs_do_relatime = B_TRUE;
break;
case TOKEN_NORELATIME:
vfsp->vfs_relatime = B_FALSE;
vfsp->vfs_do_relatime = B_TRUE;
break;
case TOKEN_NBMAND:
vfsp->vfs_nbmand = B_TRUE;
vfsp->vfs_do_nbmand = B_TRUE;
break;
case TOKEN_NONBMAND:
vfsp->vfs_nbmand = B_FALSE;
vfsp->vfs_do_nbmand = B_TRUE;
break;
case TOKEN_MNTPOINT:
vfsp->vfs_mntpoint = match_strdup(&args[0]);
if (vfsp->vfs_mntpoint == NULL)
return (SET_ERROR(ENOMEM));
break;
default:
break;
}
return (0);
}
/*
* Parse the raw mntopts and return a vfs_t describing the options.
*/
static int
zfsvfs_parse_options(char *mntopts, vfs_t **vfsp)
{
vfs_t *tmp_vfsp;
int error;
tmp_vfsp = kmem_zalloc(sizeof (vfs_t), KM_SLEEP);
if (mntopts != NULL) {
substring_t args[MAX_OPT_ARGS];
char *tmp_mntopts, *p, *t;
int token;
tmp_mntopts = t = strdup(mntopts);
if (tmp_mntopts == NULL)
return (SET_ERROR(ENOMEM));
while ((p = strsep(&t, ",")) != NULL) {
if (!*p)
continue;
args[0].to = args[0].from = NULL;
token = match_token(p, zpl_tokens, args);
error = zfsvfs_parse_option(p, token, args, tmp_vfsp);
if (error) {
strfree(tmp_mntopts);
zfsvfs_vfs_free(tmp_vfsp);
return (error);
}
}
strfree(tmp_mntopts);
}
*vfsp = tmp_vfsp;
return (0);
}
boolean_t
zfs_is_readonly(zfsvfs_t *zfsvfs)
{
return (!!(zfsvfs->z_sb->s_flags & MS_RDONLY));
}
2008-11-20 23:01:55 +03:00
/*ARGSUSED*/
int
zfs_sync(struct super_block *sb, int wait, cred_t *cr)
2008-11-20 23:01:55 +03:00
{
zfsvfs_t *zfsvfs = sb->s_fs_info;
2008-11-20 23:01:55 +03:00
/*
* Data integrity is job one. We don't want a compromised kernel
* writing to the storage pool, so we never sync during panic.
*/
if (unlikely(oops_in_progress))
2008-11-20 23:01:55 +03:00
return (0);
/*
* Semantically, the only requirement is that the sync be initiated.
* The DMU syncs out txgs frequently, so there's nothing to do.
*/
if (!wait)
return (0);
if (zfsvfs != NULL) {
2008-11-20 23:01:55 +03:00
/*
* Sync a specific filesystem.
*/
2009-07-03 02:44:48 +04:00
dsl_pool_t *dp;
2008-11-20 23:01:55 +03:00
ZFS_ENTER(zfsvfs);
dp = dmu_objset_pool(zfsvfs->z_os);
2009-07-03 02:44:48 +04:00
/*
* If the system is shutting down, then skip any
* filesystems which may exist on a suspended pool.
*/
if (spa_suspended(dp->dp_spa)) {
ZFS_EXIT(zfsvfs);
2009-07-03 02:44:48 +04:00
return (0);
}
if (zfsvfs->z_log != NULL)
zil_commit(zfsvfs->z_log, 0);
ZFS_EXIT(zfsvfs);
2008-11-20 23:01:55 +03:00
} else {
/*
* Sync all ZFS filesystems. This is what happens when you
* run sync(1M). Unlike other filesystems, ZFS honors the
* request by waiting for all pools to commit all dirty data.
*/
spa_sync_allpools();
}
return (0);
}
static void
atime_changed_cb(void *arg, uint64_t newval)
{
((zfsvfs_t *)arg)->z_atime = newval;
2008-11-20 23:01:55 +03:00
}
static void
relatime_changed_cb(void *arg, uint64_t newval)
{
((zfsvfs_t *)arg)->z_relatime = newval;
}
2008-11-20 23:01:55 +03:00
static void
xattr_changed_cb(void *arg, uint64_t newval)
{
zfsvfs_t *zfsvfs = arg;
2008-11-20 23:01:55 +03:00
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
if (newval == ZFS_XATTR_OFF) {
zfsvfs->z_flags &= ~ZSB_XATTR;
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
} else {
zfsvfs->z_flags |= ZSB_XATTR;
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
if (newval == ZFS_XATTR_SA)
zfsvfs->z_xattr_sa = B_TRUE;
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
else
zfsvfs->z_xattr_sa = B_FALSE;
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
}
2008-11-20 23:01:55 +03:00
}
static void
acltype_changed_cb(void *arg, uint64_t newval)
{
zfsvfs_t *zfsvfs = arg;
switch (newval) {
case ZFS_ACLTYPE_OFF:
zfsvfs->z_acl_type = ZFS_ACLTYPE_OFF;
zfsvfs->z_sb->s_flags &= ~MS_POSIXACL;
break;
case ZFS_ACLTYPE_POSIXACL:
#ifdef CONFIG_FS_POSIX_ACL
zfsvfs->z_acl_type = ZFS_ACLTYPE_POSIXACL;
zfsvfs->z_sb->s_flags |= MS_POSIXACL;
#else
zfsvfs->z_acl_type = ZFS_ACLTYPE_OFF;
zfsvfs->z_sb->s_flags &= ~MS_POSIXACL;
#endif /* CONFIG_FS_POSIX_ACL */
break;
default:
break;
}
}
2008-11-20 23:01:55 +03:00
static void
blksz_changed_cb(void *arg, uint64_t newval)
{
zfsvfs_t *zfsvfs = arg;
ASSERT3U(newval, <=, spa_maxblocksize(dmu_objset_spa(zfsvfs->z_os)));
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 23:15:08 +03:00
ASSERT3U(newval, >=, SPA_MINBLOCKSIZE);
ASSERT(ISP2(newval));
2008-11-20 23:01:55 +03:00
zfsvfs->z_max_blksz = newval;
2008-11-20 23:01:55 +03:00
}
static void
readonly_changed_cb(void *arg, uint64_t newval)
{
zfsvfs_t *zfsvfs = arg;
struct super_block *sb = zfsvfs->z_sb;
2008-11-20 23:01:55 +03:00
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
if (sb == NULL)
return;
if (newval)
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
sb->s_flags |= MS_RDONLY;
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
else
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
sb->s_flags &= ~MS_RDONLY;
2008-11-20 23:01:55 +03:00
}
static void
devices_changed_cb(void *arg, uint64_t newval)
{
}
static void
setuid_changed_cb(void *arg, uint64_t newval)
{
}
static void
exec_changed_cb(void *arg, uint64_t newval)
{
}
static void
nbmand_changed_cb(void *arg, uint64_t newval)
{
zfsvfs_t *zfsvfs = arg;
struct super_block *sb = zfsvfs->z_sb;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
if (sb == NULL)
return;
if (newval == TRUE)
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
sb->s_flags |= MS_MANDLOCK;
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
else
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
sb->s_flags &= ~MS_MANDLOCK;
2008-11-20 23:01:55 +03:00
}
static void
snapdir_changed_cb(void *arg, uint64_t newval)
{
((zfsvfs_t *)arg)->z_show_ctldir = newval;
2008-11-20 23:01:55 +03:00
}
static void
vscan_changed_cb(void *arg, uint64_t newval)
{
((zfsvfs_t *)arg)->z_vscan = newval;
2008-11-20 23:01:55 +03:00
}
static void
acl_inherit_changed_cb(void *arg, uint64_t newval)
{
((zfsvfs_t *)arg)->z_acl_inherit = newval;
2008-11-20 23:01:55 +03:00
}
static int
zfs_register_callbacks(vfs_t *vfsp)
2008-11-20 23:01:55 +03:00
{
struct dsl_dataset *ds = NULL;
objset_t *os = NULL;
zfsvfs_t *zfsvfs = NULL;
2008-11-20 23:01:55 +03:00
int error = 0;
ASSERT(vfsp);
zfsvfs = vfsp->vfs_data;
ASSERT(zfsvfs);
os = zfsvfs->z_os;
/*
* The act of registering our callbacks will destroy any mount
* options we may have. In order to enable temporary overrides
* of mount options, we stash away the current values and
* restore them after we register the callbacks.
*/
if (zfs_is_readonly(zfsvfs) || !spa_writeable(dmu_objset_spa(os))) {
vfsp->vfs_do_readonly = B_TRUE;
vfsp->vfs_readonly = B_TRUE;
}
2008-11-20 23:01:55 +03:00
/*
* Register property callbacks.
*
* It would probably be fine to just check for i/o error from
* the first prop_register(), but I guess I like to go
* overboard...
*/
ds = dmu_objset_ds(os);
dsl_pool_config_enter(dmu_objset_pool(os), FTAG);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
error = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_ATIME), atime_changed_cb, zfsvfs);
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_RELATIME), relatime_changed_cb, zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_XATTR), xattr_changed_cb, zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_RECORDSIZE), blksz_changed_cb, zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_READONLY), readonly_changed_cb, zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_DEVICES), devices_changed_cb, zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_SETUID), setuid_changed_cb, zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_EXEC), exec_changed_cb, zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_SNAPDIR), snapdir_changed_cb, zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_ACLTYPE), acltype_changed_cb, zfsvfs);
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_ACLINHERIT), acl_inherit_changed_cb,
zfsvfs);
2008-11-20 23:01:55 +03:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_VSCAN), vscan_changed_cb, zfsvfs);
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
error = error ? error : dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_NBMAND), nbmand_changed_cb, zfsvfs);
dsl_pool_config_exit(dmu_objset_pool(os), FTAG);
2008-11-20 23:01:55 +03:00
if (error)
goto unregister;
/*
* Invoke our callbacks to restore temporary mount options.
*/
if (vfsp->vfs_do_readonly)
readonly_changed_cb(zfsvfs, vfsp->vfs_readonly);
if (vfsp->vfs_do_setuid)
setuid_changed_cb(zfsvfs, vfsp->vfs_setuid);
if (vfsp->vfs_do_exec)
exec_changed_cb(zfsvfs, vfsp->vfs_exec);
if (vfsp->vfs_do_devices)
devices_changed_cb(zfsvfs, vfsp->vfs_devices);
if (vfsp->vfs_do_xattr)
xattr_changed_cb(zfsvfs, vfsp->vfs_xattr);
if (vfsp->vfs_do_atime)
atime_changed_cb(zfsvfs, vfsp->vfs_atime);
if (vfsp->vfs_do_relatime)
relatime_changed_cb(zfsvfs, vfsp->vfs_relatime);
if (vfsp->vfs_do_nbmand)
nbmand_changed_cb(zfsvfs, vfsp->vfs_nbmand);
2008-11-20 23:01:55 +03:00
return (0);
unregister:
dsl_prop_unregister_all(ds, zfsvfs);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
return (error);
2008-11-20 23:01:55 +03:00
}
static int
zfs_space_delta_cb(dmu_object_type_t bonustype, void *data,
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
uint64_t *userp, uint64_t *groupp, uint64_t *projectp)
2009-07-03 02:44:48 +04:00
{
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
sa_hdr_phys_t sa;
sa_hdr_phys_t *sap = data;
uint64_t flags;
int hdrsize;
boolean_t swap = B_FALSE;
/*
* Is it a valid type of object to track?
*/
if (bonustype != DMU_OT_ZNODE && bonustype != DMU_OT_SA)
return (SET_ERROR(ENOENT));
2009-07-03 02:44:48 +04:00
/*
* If we have a NULL data pointer
* then assume the id's aren't changing and
* return EEXIST to the dmu to let it know to
* use the same ids
*/
if (data == NULL)
return (SET_ERROR(EEXIST));
2009-07-03 02:44:48 +04:00
if (bonustype == DMU_OT_ZNODE) {
znode_phys_t *znp = data;
*userp = znp->zp_uid;
*groupp = znp->zp_gid;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
*projectp = ZFS_DEFAULT_PROJID;
return (0);
}
if (sap->sa_magic == 0) {
/*
* This should only happen for newly created files
* that haven't had the znode data filled in yet.
*/
*userp = 0;
*groupp = 0;
*projectp = ZFS_DEFAULT_PROJID;
return (0);
}
sa = *sap;
if (sa.sa_magic == BSWAP_32(SA_MAGIC)) {
sa.sa_magic = SA_MAGIC;
sa.sa_layout_info = BSWAP_16(sa.sa_layout_info);
swap = B_TRUE;
2009-07-03 02:44:48 +04:00
} else {
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
VERIFY3U(sa.sa_magic, ==, SA_MAGIC);
}
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
hdrsize = sa_hdrsize(&sa);
VERIFY3U(hdrsize, >=, sizeof (sa_hdr_phys_t));
*userp = *((uint64_t *)((uintptr_t)data + hdrsize + SA_UID_OFFSET));
*groupp = *((uint64_t *)((uintptr_t)data + hdrsize + SA_GID_OFFSET));
flags = *((uint64_t *)((uintptr_t)data + hdrsize + SA_FLAGS_OFFSET));
if (swap)
flags = BSWAP_64(flags);
if (flags & ZFS_PROJID)
*projectp = *((uint64_t *)((uintptr_t)data + hdrsize +
SA_PROJID_OFFSET));
else
*projectp = ZFS_DEFAULT_PROJID;
if (swap) {
*userp = BSWAP_64(*userp);
*groupp = BSWAP_64(*groupp);
*projectp = BSWAP_64(*projectp);
2009-07-03 02:44:48 +04:00
}
return (0);
2009-07-03 02:44:48 +04:00
}
static void
fuidstr_to_sid(zfsvfs_t *zfsvfs, const char *fuidstr,
2009-07-03 02:44:48 +04:00
char *domainbuf, int buflen, uid_t *ridp)
{
uint64_t fuid;
const char *domain;
fuid = zfs_strtonum(fuidstr, NULL);
2009-07-03 02:44:48 +04:00
domain = zfs_fuid_find_by_idx(zfsvfs, FUID_INDEX(fuid));
2009-07-03 02:44:48 +04:00
if (domain)
(void) strlcpy(domainbuf, domain, buflen);
else
domainbuf[0] = '\0';
*ridp = FUID_RID(fuid);
}
static uint64_t
zfs_userquota_prop_to_obj(zfsvfs_t *zfsvfs, zfs_userquota_prop_t type)
2009-07-03 02:44:48 +04:00
{
switch (type) {
case ZFS_PROP_USERUSED:
case ZFS_PROP_USEROBJUSED:
2009-07-03 02:44:48 +04:00
return (DMU_USERUSED_OBJECT);
case ZFS_PROP_GROUPUSED:
case ZFS_PROP_GROUPOBJUSED:
2009-07-03 02:44:48 +04:00
return (DMU_GROUPUSED_OBJECT);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
case ZFS_PROP_PROJECTUSED:
case ZFS_PROP_PROJECTOBJUSED:
return (DMU_PROJECTUSED_OBJECT);
2009-07-03 02:44:48 +04:00
case ZFS_PROP_USERQUOTA:
return (zfsvfs->z_userquota_obj);
2009-07-03 02:44:48 +04:00
case ZFS_PROP_GROUPQUOTA:
return (zfsvfs->z_groupquota_obj);
case ZFS_PROP_USEROBJQUOTA:
return (zfsvfs->z_userobjquota_obj);
case ZFS_PROP_GROUPOBJQUOTA:
return (zfsvfs->z_groupobjquota_obj);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
case ZFS_PROP_PROJECTQUOTA:
return (zfsvfs->z_projectquota_obj);
case ZFS_PROP_PROJECTOBJQUOTA:
return (zfsvfs->z_projectobjquota_obj);
default:
return (ZFS_NO_OBJECT);
2009-07-03 02:44:48 +04:00
}
}
int
zfs_userspace_many(zfsvfs_t *zfsvfs, zfs_userquota_prop_t type,
2009-07-03 02:44:48 +04:00
uint64_t *cookiep, void *vbuf, uint64_t *bufsizep)
{
int error;
zap_cursor_t zc;
zap_attribute_t za;
zfs_useracct_t *buf = vbuf;
uint64_t obj;
int offset = 0;
2009-07-03 02:44:48 +04:00
if (!dmu_objset_userspace_present(zfsvfs->z_os))
return (SET_ERROR(ENOTSUP));
2009-07-03 02:44:48 +04:00
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if ((type == ZFS_PROP_PROJECTQUOTA || type == ZFS_PROP_PROJECTUSED ||
type == ZFS_PROP_PROJECTOBJQUOTA ||
type == ZFS_PROP_PROJECTOBJUSED) &&
!dmu_objset_projectquota_present(zfsvfs->z_os))
return (SET_ERROR(ENOTSUP));
if ((type == ZFS_PROP_USEROBJUSED || type == ZFS_PROP_GROUPOBJUSED ||
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
type == ZFS_PROP_USEROBJQUOTA || type == ZFS_PROP_GROUPOBJQUOTA ||
type == ZFS_PROP_PROJECTOBJUSED ||
type == ZFS_PROP_PROJECTOBJQUOTA) &&
!dmu_objset_userobjspace_present(zfsvfs->z_os))
return (SET_ERROR(ENOTSUP));
obj = zfs_userquota_prop_to_obj(zfsvfs, type);
if (obj == ZFS_NO_OBJECT) {
2009-07-03 02:44:48 +04:00
*bufsizep = 0;
return (0);
}
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (type == ZFS_PROP_USEROBJUSED || type == ZFS_PROP_GROUPOBJUSED ||
type == ZFS_PROP_PROJECTOBJUSED)
offset = DMU_OBJACCT_PREFIX_LEN;
for (zap_cursor_init_serialized(&zc, zfsvfs->z_os, obj, *cookiep);
2009-07-03 02:44:48 +04:00
(error = zap_cursor_retrieve(&zc, &za)) == 0;
zap_cursor_advance(&zc)) {
if ((uintptr_t)buf - (uintptr_t)vbuf + sizeof (zfs_useracct_t) >
*bufsizep)
break;
/*
* skip object quota (with zap name prefix DMU_OBJACCT_PREFIX)
* when dealing with block quota and vice versa.
*/
if ((offset > 0) != (strncmp(za.za_name, DMU_OBJACCT_PREFIX,
DMU_OBJACCT_PREFIX_LEN) == 0))
continue;
fuidstr_to_sid(zfsvfs, za.za_name + offset,
2009-07-03 02:44:48 +04:00
buf->zu_domain, sizeof (buf->zu_domain), &buf->zu_rid);
buf->zu_space = za.za_first_integer;
buf++;
}
if (error == ENOENT)
error = 0;
ASSERT3U((uintptr_t)buf - (uintptr_t)vbuf, <=, *bufsizep);
*bufsizep = (uintptr_t)buf - (uintptr_t)vbuf;
*cookiep = zap_cursor_serialize(&zc);
zap_cursor_fini(&zc);
return (error);
}
/*
* buf must be big enough (eg, 32 bytes)
*/
static int
id_to_fuidstr(zfsvfs_t *zfsvfs, const char *domain, uid_t rid,
2009-07-03 02:44:48 +04:00
char *buf, boolean_t addok)
{
uint64_t fuid;
int domainid = 0;
if (domain && domain[0]) {
domainid = zfs_fuid_find_by_domain(zfsvfs, domain, NULL, addok);
2009-07-03 02:44:48 +04:00
if (domainid == -1)
return (SET_ERROR(ENOENT));
2009-07-03 02:44:48 +04:00
}
fuid = FUID_ENCODE(domainid, rid);
(void) sprintf(buf, "%llx", (longlong_t)fuid);
return (0);
}
int
zfs_userspace_one(zfsvfs_t *zfsvfs, zfs_userquota_prop_t type,
2009-07-03 02:44:48 +04:00
const char *domain, uint64_t rid, uint64_t *valp)
{
char buf[20 + DMU_OBJACCT_PREFIX_LEN];
int offset = 0;
2009-07-03 02:44:48 +04:00
int err;
uint64_t obj;
*valp = 0;
if (!dmu_objset_userspace_present(zfsvfs->z_os))
return (SET_ERROR(ENOTSUP));
2009-07-03 02:44:48 +04:00
if ((type == ZFS_PROP_USEROBJUSED || type == ZFS_PROP_GROUPOBJUSED ||
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
type == ZFS_PROP_USEROBJQUOTA || type == ZFS_PROP_GROUPOBJQUOTA ||
type == ZFS_PROP_PROJECTOBJUSED ||
type == ZFS_PROP_PROJECTOBJQUOTA) &&
!dmu_objset_userobjspace_present(zfsvfs->z_os))
return (SET_ERROR(ENOTSUP));
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (type == ZFS_PROP_PROJECTQUOTA || type == ZFS_PROP_PROJECTUSED ||
type == ZFS_PROP_PROJECTOBJQUOTA ||
type == ZFS_PROP_PROJECTOBJUSED) {
if (!dmu_objset_projectquota_present(zfsvfs->z_os))
return (SET_ERROR(ENOTSUP));
if (!zpl_is_valid_projid(rid))
return (SET_ERROR(EINVAL));
}
obj = zfs_userquota_prop_to_obj(zfsvfs, type);
if (obj == ZFS_NO_OBJECT)
2009-07-03 02:44:48 +04:00
return (0);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (type == ZFS_PROP_USEROBJUSED || type == ZFS_PROP_GROUPOBJUSED ||
type == ZFS_PROP_PROJECTOBJUSED) {
strlcpy(buf, DMU_OBJACCT_PREFIX, DMU_OBJACCT_PREFIX_LEN + 1);
offset = DMU_OBJACCT_PREFIX_LEN;
}
err = id_to_fuidstr(zfsvfs, domain, rid, buf + offset, B_FALSE);
2009-07-03 02:44:48 +04:00
if (err)
return (err);
err = zap_lookup(zfsvfs->z_os, obj, buf, 8, 1, valp);
2009-07-03 02:44:48 +04:00
if (err == ENOENT)
err = 0;
return (err);
}
int
zfs_set_userquota(zfsvfs_t *zfsvfs, zfs_userquota_prop_t type,
2009-07-03 02:44:48 +04:00
const char *domain, uint64_t rid, uint64_t quota)
{
char buf[32];
int err;
dmu_tx_t *tx;
uint64_t *objp;
boolean_t fuid_dirtied;
if (zfsvfs->z_version < ZPL_VERSION_USERSPACE)
return (SET_ERROR(ENOTSUP));
2009-07-03 02:44:48 +04:00
switch (type) {
case ZFS_PROP_USERQUOTA:
objp = &zfsvfs->z_userquota_obj;
break;
case ZFS_PROP_GROUPQUOTA:
objp = &zfsvfs->z_groupquota_obj;
break;
case ZFS_PROP_USEROBJQUOTA:
objp = &zfsvfs->z_userobjquota_obj;
break;
case ZFS_PROP_GROUPOBJQUOTA:
objp = &zfsvfs->z_groupobjquota_obj;
break;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
case ZFS_PROP_PROJECTQUOTA:
if (!dmu_objset_projectquota_enabled(zfsvfs->z_os))
return (SET_ERROR(ENOTSUP));
if (!zpl_is_valid_projid(rid))
return (SET_ERROR(EINVAL));
objp = &zfsvfs->z_projectquota_obj;
break;
case ZFS_PROP_PROJECTOBJQUOTA:
if (!dmu_objset_projectquota_enabled(zfsvfs->z_os))
return (SET_ERROR(ENOTSUP));
if (!zpl_is_valid_projid(rid))
return (SET_ERROR(EINVAL));
objp = &zfsvfs->z_projectobjquota_obj;
break;
default:
return (SET_ERROR(EINVAL));
}
2009-07-03 02:44:48 +04:00
err = id_to_fuidstr(zfsvfs, domain, rid, buf, B_TRUE);
2009-07-03 02:44:48 +04:00
if (err)
return (err);
fuid_dirtied = zfsvfs->z_fuid_dirty;
2009-07-03 02:44:48 +04:00
tx = dmu_tx_create(zfsvfs->z_os);
2009-07-03 02:44:48 +04:00
dmu_tx_hold_zap(tx, *objp ? *objp : DMU_NEW_OBJECT, B_TRUE, NULL);
if (*objp == 0) {
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_TRUE,
zfs_userquota_prop_prefixes[type]);
}
if (fuid_dirtied)
zfs_fuid_txhold(zfsvfs, tx);
2009-07-03 02:44:48 +04:00
err = dmu_tx_assign(tx, TXG_WAIT);
if (err) {
dmu_tx_abort(tx);
return (err);
}
mutex_enter(&zfsvfs->z_lock);
2009-07-03 02:44:48 +04:00
if (*objp == 0) {
*objp = zap_create(zfsvfs->z_os, DMU_OT_USERGROUP_QUOTA,
2009-07-03 02:44:48 +04:00
DMU_OT_NONE, 0, tx);
VERIFY(0 == zap_add(zfsvfs->z_os, MASTER_NODE_OBJ,
2009-07-03 02:44:48 +04:00
zfs_userquota_prop_prefixes[type], 8, 1, objp, tx));
}
mutex_exit(&zfsvfs->z_lock);
2009-07-03 02:44:48 +04:00
if (quota == 0) {
err = zap_remove(zfsvfs->z_os, *objp, buf, tx);
2009-07-03 02:44:48 +04:00
if (err == ENOENT)
err = 0;
} else {
err = zap_update(zfsvfs->z_os, *objp, buf, 8, 1, &quota, tx);
2009-07-03 02:44:48 +04:00
}
ASSERT(err == 0);
if (fuid_dirtied)
zfs_fuid_sync(zfsvfs, tx);
2009-07-03 02:44:48 +04:00
dmu_tx_commit(tx);
return (err);
}
boolean_t
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
zfs_id_overobjquota(zfsvfs_t *zfsvfs, uint64_t usedobj, uint64_t id)
{
char buf[20 + DMU_OBJACCT_PREFIX_LEN];
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
uint64_t used, quota, quotaobj;
int err;
if (!dmu_objset_userobjspace_present(zfsvfs->z_os)) {
if (dmu_objset_userobjspace_upgradable(zfsvfs->z_os)) {
dsl_pool_config_enter(
dmu_objset_pool(zfsvfs->z_os), FTAG);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
dmu_objset_id_quota_upgrade(zfsvfs->z_os);
dsl_pool_config_exit(
dmu_objset_pool(zfsvfs->z_os), FTAG);
}
return (B_FALSE);
}
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (usedobj == DMU_PROJECTUSED_OBJECT) {
if (!dmu_objset_projectquota_present(zfsvfs->z_os)) {
if (dmu_objset_projectquota_upgradable(zfsvfs->z_os)) {
dsl_pool_config_enter(
dmu_objset_pool(zfsvfs->z_os), FTAG);
dmu_objset_id_quota_upgrade(zfsvfs->z_os);
dsl_pool_config_exit(
dmu_objset_pool(zfsvfs->z_os), FTAG);
}
return (B_FALSE);
}
quotaobj = zfsvfs->z_projectobjquota_obj;
} else if (usedobj == DMU_USERUSED_OBJECT) {
quotaobj = zfsvfs->z_userobjquota_obj;
} else if (usedobj == DMU_GROUPUSED_OBJECT) {
quotaobj = zfsvfs->z_groupobjquota_obj;
} else {
return (B_FALSE);
}
if (quotaobj == 0 || zfsvfs->z_replay)
return (B_FALSE);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
(void) sprintf(buf, "%llx", (longlong_t)id);
err = zap_lookup(zfsvfs->z_os, quotaobj, buf, 8, 1, &quota);
if (err != 0)
return (B_FALSE);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
(void) sprintf(buf, DMU_OBJACCT_PREFIX "%llx", (longlong_t)id);
err = zap_lookup(zfsvfs->z_os, usedobj, buf, 8, 1, &used);
if (err != 0)
return (B_FALSE);
return (used >= quota);
}
2009-07-03 02:44:48 +04:00
boolean_t
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
zfs_id_overblockquota(zfsvfs_t *zfsvfs, uint64_t usedobj, uint64_t id)
2009-07-03 02:44:48 +04:00
{
char buf[20];
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
uint64_t used, quota, quotaobj;
2009-07-03 02:44:48 +04:00
int err;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (usedobj == DMU_PROJECTUSED_OBJECT) {
if (!dmu_objset_projectquota_present(zfsvfs->z_os)) {
if (dmu_objset_projectquota_upgradable(zfsvfs->z_os)) {
dsl_pool_config_enter(
dmu_objset_pool(zfsvfs->z_os), FTAG);
dmu_objset_id_quota_upgrade(zfsvfs->z_os);
dsl_pool_config_exit(
dmu_objset_pool(zfsvfs->z_os), FTAG);
}
return (B_FALSE);
}
quotaobj = zfsvfs->z_projectquota_obj;
} else if (usedobj == DMU_USERUSED_OBJECT) {
quotaobj = zfsvfs->z_userquota_obj;
} else if (usedobj == DMU_GROUPUSED_OBJECT) {
quotaobj = zfsvfs->z_groupquota_obj;
} else {
return (B_FALSE);
}
if (quotaobj == 0 || zfsvfs->z_replay)
2009-07-03 02:44:48 +04:00
return (B_FALSE);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
(void) sprintf(buf, "%llx", (longlong_t)id);
err = zap_lookup(zfsvfs->z_os, quotaobj, buf, 8, 1, &quota);
2009-07-03 02:44:48 +04:00
if (err != 0)
return (B_FALSE);
err = zap_lookup(zfsvfs->z_os, usedobj, buf, 8, 1, &used);
2009-07-03 02:44:48 +04:00
if (err != 0)
return (B_FALSE);
return (used >= quota);
}
boolean_t
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
zfs_id_overquota(zfsvfs_t *zfsvfs, uint64_t usedobj, uint64_t id)
{
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
return (zfs_id_overblockquota(zfsvfs, usedobj, id) ||
zfs_id_overobjquota(zfsvfs, usedobj, id));
}
/*
* Associate this zfsvfs with the given objset, which must be owned.
* This will cache a bunch of on-disk state from the objset in the
* zfsvfs.
*/
static int
zfsvfs_init(zfsvfs_t *zfsvfs, objset_t *os)
2009-07-03 02:44:48 +04:00
{
int error;
uint64_t val;
zfsvfs->z_max_blksz = SPA_OLD_MAXBLOCKSIZE;
zfsvfs->z_show_ctldir = ZFS_SNAPDIR_VISIBLE;
zfsvfs->z_os = os;
2009-07-03 02:44:48 +04:00
error = zfs_get_zplprop(os, ZFS_PROP_VERSION, &zfsvfs->z_version);
if (error != 0)
return (error);
if (zfsvfs->z_version >
zfs_zpl_version_map(spa_version(dmu_objset_spa(os)))) {
(void) printk("Can't mount a version %lld file system "
"on a version %lld pool\n. Pool must be upgraded to mount "
"this file system.", (u_longlong_t)zfsvfs->z_version,
(u_longlong_t)spa_version(dmu_objset_spa(os)));
return (SET_ERROR(ENOTSUP));
2009-07-03 02:44:48 +04:00
}
error = zfs_get_zplprop(os, ZFS_PROP_NORMALIZE, &val);
if (error != 0)
return (error);
zfsvfs->z_norm = (int)val;
2009-07-03 02:44:48 +04:00
error = zfs_get_zplprop(os, ZFS_PROP_UTF8ONLY, &val);
if (error != 0)
return (error);
zfsvfs->z_utf8 = (val != 0);
2009-07-03 02:44:48 +04:00
error = zfs_get_zplprop(os, ZFS_PROP_CASE, &val);
if (error != 0)
return (error);
zfsvfs->z_case = (uint_t)val;
2009-07-03 02:44:48 +04:00
if ((error = zfs_get_zplprop(os, ZFS_PROP_ACLTYPE, &val)) != 0)
return (error);
zfsvfs->z_acl_type = (uint_t)val;
2009-07-03 02:44:48 +04:00
/*
* Fold case on file systems that are always or sometimes case
* insensitive.
*/
if (zfsvfs->z_case == ZFS_CASE_INSENSITIVE ||
zfsvfs->z_case == ZFS_CASE_MIXED)
zfsvfs->z_norm |= U8_TEXTPREP_TOUPPER;
2009-07-03 02:44:48 +04:00
zfsvfs->z_use_fuids = USE_FUIDS(zfsvfs->z_version, zfsvfs->z_os);
zfsvfs->z_use_sa = USE_SA(zfsvfs->z_version, zfsvfs->z_os);
uint64_t sa_obj = 0;
if (zfsvfs->z_use_sa) {
/* should either have both of these objects or none */
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_SA_ATTRS, 8, 1,
&sa_obj);
if (error != 0)
return (error);
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-25 03:55:20 +04:00
error = zfs_get_zplprop(os, ZFS_PROP_XATTR, &val);
if ((error == 0) && (val == ZFS_XATTR_SA))
zfsvfs->z_xattr_sa = B_TRUE;
}
error = sa_setup(os, sa_obj, zfs_attr_table, ZPL_END,
&zfsvfs->z_attr_table);
if (error != 0)
return (error);
if (zfsvfs->z_version >= ZPL_VERSION_SA)
sa_register_update_callback(os, zfs_sa_upgrade);
2009-07-03 02:44:48 +04:00
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_ROOT_OBJ, 8, 1,
&zfsvfs->z_root);
if (error != 0)
return (error);
ASSERT(zfsvfs->z_root != 0);
2009-07-03 02:44:48 +04:00
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_UNLINKED_SET, 8, 1,
&zfsvfs->z_unlinkedobj);
if (error != 0)
return (error);
2009-07-03 02:44:48 +04:00
error = zap_lookup(os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[ZFS_PROP_USERQUOTA],
8, 1, &zfsvfs->z_userquota_obj);
if (error == ENOENT)
zfsvfs->z_userquota_obj = 0;
else if (error != 0)
return (error);
2009-07-03 02:44:48 +04:00
error = zap_lookup(os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[ZFS_PROP_GROUPQUOTA],
8, 1, &zfsvfs->z_groupquota_obj);
if (error == ENOENT)
zfsvfs->z_groupquota_obj = 0;
else if (error != 0)
return (error);
2009-07-03 02:44:48 +04:00
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
error = zap_lookup(os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[ZFS_PROP_PROJECTQUOTA],
8, 1, &zfsvfs->z_projectquota_obj);
if (error == ENOENT)
zfsvfs->z_projectquota_obj = 0;
else if (error != 0)
return (error);
error = zap_lookup(os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[ZFS_PROP_USEROBJQUOTA],
8, 1, &zfsvfs->z_userobjquota_obj);
if (error == ENOENT)
zfsvfs->z_userobjquota_obj = 0;
else if (error != 0)
return (error);
error = zap_lookup(os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[ZFS_PROP_GROUPOBJQUOTA],
8, 1, &zfsvfs->z_groupobjquota_obj);
if (error == ENOENT)
zfsvfs->z_groupobjquota_obj = 0;
else if (error != 0)
return (error);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
error = zap_lookup(os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[ZFS_PROP_PROJECTOBJQUOTA],
8, 1, &zfsvfs->z_projectobjquota_obj);
if (error == ENOENT)
zfsvfs->z_projectobjquota_obj = 0;
else if (error != 0)
return (error);
2009-07-03 02:44:48 +04:00
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_FUID_TABLES, 8, 1,
&zfsvfs->z_fuid_obj);
if (error == ENOENT)
zfsvfs->z_fuid_obj = 0;
else if (error != 0)
return (error);
2009-07-03 02:44:48 +04:00
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_SHARES_DIR, 8, 1,
&zfsvfs->z_shares_dir);
if (error == ENOENT)
zfsvfs->z_shares_dir = 0;
else if (error != 0)
return (error);
return (0);
}
int
zfsvfs_create(const char *osname, boolean_t readonly, zfsvfs_t **zfvp)
{
objset_t *os;
zfsvfs_t *zfsvfs;
int error;
boolean_t ro = (readonly || (strchr(osname, '@') != NULL));
zfsvfs = kmem_zalloc(sizeof (zfsvfs_t), KM_SLEEP);
error = dmu_objset_own(osname, DMU_OST_ZFS, ro, B_TRUE, zfsvfs, &os);
if (error != 0) {
kmem_free(zfsvfs, sizeof (zfsvfs_t));
return (error);
}
error = zfsvfs_create_impl(zfvp, zfsvfs, os);
if (error != 0) {
dmu_objset_disown(os, B_TRUE, zfsvfs);
}
return (error);
}
int
zfsvfs_create_impl(zfsvfs_t **zfvp, zfsvfs_t *zfsvfs, objset_t *os)
{
int error;
zfsvfs->z_vfs = NULL;
zfsvfs->z_sb = NULL;
zfsvfs->z_parent = zfsvfs;
2009-07-03 02:44:48 +04:00
mutex_init(&zfsvfs->z_znodes_lock, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&zfsvfs->z_lock, NULL, MUTEX_DEFAULT, NULL);
list_create(&zfsvfs->z_all_znodes, sizeof (znode_t),
2009-07-03 02:44:48 +04:00
offsetof(znode_t, z_link_node));
rrm_init(&zfsvfs->z_teardown_lock, B_FALSE);
rw_init(&zfsvfs->z_teardown_inactive_lock, NULL, RW_DEFAULT, NULL);
rw_init(&zfsvfs->z_fuid_lock, NULL, RW_DEFAULT, NULL);
int size = MIN(1 << (highbit64(zfs_object_mutex_size) - 1),
ZFS_OBJ_MTX_MAX);
zfsvfs->z_hold_size = size;
zfsvfs->z_hold_trees = vmem_zalloc(sizeof (avl_tree_t) * size,
KM_SLEEP);
zfsvfs->z_hold_locks = vmem_zalloc(sizeof (kmutex_t) * size, KM_SLEEP);
for (int i = 0; i != size; i++) {
avl_create(&zfsvfs->z_hold_trees[i], zfs_znode_hold_compare,
sizeof (znode_hold_t), offsetof(znode_hold_t, zh_node));
mutex_init(&zfsvfs->z_hold_locks[i], NULL, MUTEX_DEFAULT, NULL);
}
2009-07-03 02:44:48 +04:00
error = zfsvfs_init(zfsvfs, os);
if (error != 0) {
*zfvp = NULL;
kmem_free(zfsvfs, sizeof (zfsvfs_t));
return (error);
}
*zfvp = zfsvfs;
2009-07-03 02:44:48 +04:00
return (0);
}
static int
zfsvfs_setup(zfsvfs_t *zfsvfs, boolean_t mounting)
2008-11-20 23:01:55 +03:00
{
int error;
Encryption Stability and On-Disk Format Fixes The on-disk format for encrypted datasets protects not only the encrypted and authenticated blocks themselves, but also the order and interpretation of these blocks. In order to make this work while maintaining the ability to do raw sends, the indirect bps maintain a secure checksum of all the MACs in the block below it along with a few other fields that determine how the data is interpreted. Unfortunately, the current on-disk format erroneously includes some fields which are not portable and thus cannot support raw sends. It is not possible to easily work around this issue due to a separate and much smaller bug which causes indirect blocks for encrypted dnodes to not be compressed, which conflicts with the previous bug. In addition, the current code generates incompatible on-disk formats on big endian and little endian systems due to an issue with how block pointers are authenticated. Finally, raw send streams do not currently include dn_maxblkid when sending both the metadnode and normal dnodes which are needed in order to ensure that we are correctly maintaining the portable objset MAC. This patch zero's out the offending fields when computing the bp MAC and ensures that these MACs are always calculated in little endian order (regardless of the host system's byte order). This patch also registers an errata for the old on-disk format, which we detect by adding a "version" field to newly created DSL Crypto Keys. We allow datasets without a version (version 0) to only be mounted for read so that they can easily be migrated. We also now include dn_maxblkid in raw send streams to ensure the MAC can be maintained correctly. This patch also contains minor bug fixes and cleanups. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #6845 Closes #6864 Closes #7052
2017-11-08 22:12:59 +03:00
boolean_t readonly = zfs_is_readonly(zfsvfs);
error = zfs_register_callbacks(zfsvfs->z_vfs);
2008-11-20 23:01:55 +03:00
if (error)
return (error);
zfsvfs->z_log = zil_open(zfsvfs->z_os, zfs_get_data);
2009-07-03 02:44:48 +04:00
2008-11-20 23:01:55 +03:00
/*
* If we are not mounting (ie: online recv), then we don't
* have to worry about replaying the log as we blocked all
* operations out since we closed the ZIL.
*/
if (mounting) {
/*
* During replay we remove the read only flag to
* allow replays to succeed.
*/
2009-01-16 00:59:39 +03:00
if (readonly != 0)
readonly_changed_cb(zfsvfs, B_FALSE);
2009-01-16 00:59:39 +03:00
else
zfs_unlinked_drain(zfsvfs);
2008-11-20 23:01:55 +03:00
/*
* Parse and replay the intent log.
*
* Because of ziltest, this must be done after
* zfs_unlinked_drain(). (Further note: ziltest
* doesn't use readonly mounts, where
* zfs_unlinked_drain() isn't called.) This is because
* ziltest causes spa_sync() to think it's committed,
* but actually it is not, so the intent log contains
* many txg's worth of changes.
*
* In particular, if object N is in the unlinked set in
* the last txg to actually sync, then it could be
* actually freed in a later txg and then reallocated
* in a yet later txg. This would write a "create
* object N" record to the intent log. Normally, this
* would be fine because the spa_sync() would have
* written out the fact that object N is free, before
* we could write the "create object N" intent log
* record.
*
* But when we are in ziltest mode, we advance the "open
* txg" without actually spa_sync()-ing the changes to
* disk. So we would see that object N is still
* allocated and in the unlinked set, and there is an
* intent log record saying to allocate it.
*/
if (spa_writeable(dmu_objset_spa(zfsvfs->z_os))) {
if (zil_replay_disable) {
zil_destroy(zfsvfs->z_log, B_FALSE);
} else {
zfsvfs->z_replay = B_TRUE;
zil_replay(zfsvfs->z_os, zfsvfs,
zfs_replay_vector);
zfsvfs->z_replay = B_FALSE;
}
2009-01-16 00:59:39 +03:00
}
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
/* restore readonly bit */
if (readonly != 0)
readonly_changed_cb(zfsvfs, B_TRUE);
2008-11-20 23:01:55 +03:00
}
/*
* Set the objset user_ptr to track its zfsvfs.
*/
mutex_enter(&zfsvfs->z_os->os_user_ptr_lock);
dmu_objset_set_user(zfsvfs->z_os, zfsvfs);
mutex_exit(&zfsvfs->z_os->os_user_ptr_lock);
2008-11-20 23:01:55 +03:00
return (0);
}
2009-07-03 02:44:48 +04:00
void
zfsvfs_free(zfsvfs_t *zfsvfs)
2008-11-20 23:01:55 +03:00
{
int i, size = zfsvfs->z_hold_size;
2009-07-03 02:44:48 +04:00
zfs_fuid_destroy(zfsvfs);
2009-07-03 02:44:48 +04:00
mutex_destroy(&zfsvfs->z_znodes_lock);
mutex_destroy(&zfsvfs->z_lock);
list_destroy(&zfsvfs->z_all_znodes);
rrm_destroy(&zfsvfs->z_teardown_lock);
rw_destroy(&zfsvfs->z_teardown_inactive_lock);
rw_destroy(&zfsvfs->z_fuid_lock);
for (i = 0; i != size; i++) {
avl_destroy(&zfsvfs->z_hold_trees[i]);
mutex_destroy(&zfsvfs->z_hold_locks[i]);
}
vmem_free(zfsvfs->z_hold_trees, sizeof (avl_tree_t) * size);
vmem_free(zfsvfs->z_hold_locks, sizeof (kmutex_t) * size);
zfsvfs_vfs_free(zfsvfs->z_vfs);
kmem_free(zfsvfs, sizeof (zfsvfs_t));
2008-11-20 23:01:55 +03:00
}
2009-07-03 02:44:48 +04:00
static void
zfs_set_fuid_feature(zfsvfs_t *zfsvfs)
2009-07-03 02:44:48 +04:00
{
zfsvfs->z_use_fuids = USE_FUIDS(zfsvfs->z_version, zfsvfs->z_os);
zfsvfs->z_use_sa = USE_SA(zfsvfs->z_version, zfsvfs->z_os);
2009-07-03 02:44:48 +04:00
}
2008-11-20 23:01:55 +03:00
void
zfs_unregister_callbacks(zfsvfs_t *zfsvfs)
2008-11-20 23:01:55 +03:00
{
objset_t *os = zfsvfs->z_os;
2008-11-20 23:01:55 +03:00
if (!dmu_objset_is_snapshot(os))
dsl_prop_unregister_all(dmu_objset_ds(os), zfsvfs);
2008-11-20 23:01:55 +03:00
}
#ifdef HAVE_MLSLABEL
/*
* Check that the hex label string is appropriate for the dataset being
* mounted into the global_zone proper.
*
* Return an error if the hex label string is not default or
* admin_low/admin_high. For admin_low labels, the corresponding
* dataset must be readonly.
*/
int
zfs_check_global_label(const char *dsname, const char *hexsl)
{
if (strcasecmp(hexsl, ZFS_MLSLABEL_DEFAULT) == 0)
return (0);
if (strcasecmp(hexsl, ADMIN_HIGH) == 0)
return (0);
if (strcasecmp(hexsl, ADMIN_LOW) == 0) {
/* must be readonly */
uint64_t rdonly;
if (dsl_prop_get_integer(dsname,
zfs_prop_to_name(ZFS_PROP_READONLY), &rdonly, NULL))
return (SET_ERROR(EACCES));
return (rdonly ? 0 : EACCES);
}
return (SET_ERROR(EACCES));
}
#endif /* HAVE_MLSLABEL */
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
static int
zfs_statfs_project(zfsvfs_t *zfsvfs, znode_t *zp, struct kstatfs *statp,
uint32_t bshift)
{
char buf[20 + DMU_OBJACCT_PREFIX_LEN];
uint64_t offset = DMU_OBJACCT_PREFIX_LEN;
uint64_t quota;
uint64_t used;
int err;
strlcpy(buf, DMU_OBJACCT_PREFIX, DMU_OBJACCT_PREFIX_LEN + 1);
err = id_to_fuidstr(zfsvfs, NULL, zp->z_projid, buf + offset, B_FALSE);
if (err)
return (err);
if (zfsvfs->z_projectquota_obj == 0)
goto objs;
err = zap_lookup(zfsvfs->z_os, zfsvfs->z_projectquota_obj,
buf + offset, 8, 1, &quota);
if (err == ENOENT)
goto objs;
else if (err)
return (err);
err = zap_lookup(zfsvfs->z_os, DMU_PROJECTUSED_OBJECT,
buf + offset, 8, 1, &used);
if (unlikely(err == ENOENT)) {
uint32_t blksize;
u_longlong_t nblocks;
/*
* Quota accounting is async, so it is possible race case.
* There is at least one object with the given project ID.
*/
sa_object_size(zp->z_sa_hdl, &blksize, &nblocks);
if (unlikely(zp->z_blksz == 0))
blksize = zfsvfs->z_max_blksz;
used = blksize * nblocks;
} else if (err) {
return (err);
}
statp->f_blocks = quota >> bshift;
statp->f_bfree = (quota > used) ? ((quota - used) >> bshift) : 0;
statp->f_bavail = statp->f_bfree;
objs:
if (zfsvfs->z_projectobjquota_obj == 0)
return (0);
err = zap_lookup(zfsvfs->z_os, zfsvfs->z_projectobjquota_obj,
buf + offset, 8, 1, &quota);
if (err == ENOENT)
return (0);
else if (err)
return (err);
err = zap_lookup(zfsvfs->z_os, DMU_PROJECTUSED_OBJECT,
buf, 8, 1, &used);
if (unlikely(err == ENOENT)) {
/*
* Quota accounting is async, so it is possible race case.
* There is at least one object with the given project ID.
*/
used = 1;
} else if (err) {
return (err);
}
statp->f_files = quota;
statp->f_ffree = (quota > used) ? (quota - used) : 0;
return (0);
}
2010-12-17 22:18:08 +03:00
int
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
zfs_statvfs(struct dentry *dentry, struct kstatfs *statp)
2008-11-20 23:01:55 +03:00
{
zfsvfs_t *zfsvfs = dentry->d_sb->s_fs_info;
2008-11-20 23:01:55 +03:00
uint64_t refdbytes, availbytes, usedobjs, availobjs;
uint64_t fsid;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
uint32_t bshift;
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
int err = 0;
2008-11-20 23:01:55 +03:00
ZFS_ENTER(zfsvfs);
2008-11-20 23:01:55 +03:00
dmu_objset_space(zfsvfs->z_os,
2008-11-20 23:01:55 +03:00
&refdbytes, &availbytes, &usedobjs, &availobjs);
fsid = dmu_objset_fsid_guid(zfsvfs->z_os);
2008-11-20 23:01:55 +03:00
/*
* The underlying storage pool actually uses multiple block
* size. Under Solaris frsize (fragment size) is reported as
* the smallest block size we support, and bsize (block size)
* as the filesystem's maximum block size. Unfortunately,
* under Linux the fragment size and block size are often used
* interchangeably. Thus we are forced to report both of them
* as the filesystem's maximum block size.
2008-11-20 23:01:55 +03:00
*/
statp->f_frsize = zfsvfs->z_max_blksz;
statp->f_bsize = zfsvfs->z_max_blksz;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
bshift = fls(statp->f_bsize) - 1;
2008-11-20 23:01:55 +03:00
/*
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
* The following report "total" blocks of various kinds in
* the file system, but reported in terms of f_bsize - the
* "preferred" size.
2008-11-20 23:01:55 +03:00
*/
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
statp->f_blocks = (refdbytes + availbytes) >> bshift;
statp->f_bfree = availbytes >> bshift;
2008-11-20 23:01:55 +03:00
statp->f_bavail = statp->f_bfree; /* no root reservation */
/*
* statvfs() should really be called statufs(), because it assumes
* static metadata. ZFS doesn't preallocate files, so the best
* we can do is report the max that could possibly fit in f_files,
* and that minus the number actually used in f_ffree.
* For f_ffree, report the smaller of the number of object available
* and the number of blocks (each object will take at least a block).
*/
statp->f_ffree = MIN(availobjs, availbytes >> DNODE_SHIFT);
2008-11-20 23:01:55 +03:00
statp->f_files = statp->f_ffree + usedobjs;
statp->f_fsid.val[0] = (uint32_t)fsid;
statp->f_fsid.val[1] = (uint32_t)(fsid >> 32);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
statp->f_type = ZFS_SUPER_MAGIC;
statp->f_namelen = MAXNAMELEN - 1;
2008-11-20 23:01:55 +03:00
/*
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
* We have all of 40 characters to stuff a string here.
2008-11-20 23:01:55 +03:00
* Is there anything useful we could/should provide?
*/
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
bzero(statp->f_spare, sizeof (statp->f_spare));
2008-11-20 23:01:55 +03:00
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
if (dmu_objset_projectquota_enabled(zfsvfs->z_os) &&
dmu_objset_projectquota_present(zfsvfs->z_os)) {
znode_t *zp = ITOZ(dentry->d_inode);
if (zp->z_pflags & ZFS_PROJINHERIT && zp->z_projid &&
zpl_is_valid_projid(zp->z_projid))
err = zfs_statfs_project(zfsvfs, zp, statp, bshift);
}
ZFS_EXIT(zfsvfs);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
return (err);
2008-11-20 23:01:55 +03:00
}
2010-12-17 22:18:08 +03:00
int
zfs_root(zfsvfs_t *zfsvfs, struct inode **ipp)
2008-11-20 23:01:55 +03:00
{
znode_t *rootzp;
int error;
ZFS_ENTER(zfsvfs);
2008-11-20 23:01:55 +03:00
error = zfs_zget(zfsvfs, zfsvfs->z_root, &rootzp);
2008-11-20 23:01:55 +03:00
if (error == 0)
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
*ipp = ZTOI(rootzp);
2008-11-20 23:01:55 +03:00
ZFS_EXIT(zfsvfs);
2008-11-20 23:01:55 +03:00
return (error);
}
#ifdef HAVE_D_PRUNE_ALIASES
/*
* Linux kernels older than 3.1 do not support a per-filesystem shrinker.
* To accommodate this we must improvise and manually walk the list of znodes
* attempting to prune dentries in order to be able to drop the inodes.
*
* To avoid scanning the same znodes multiple times they are always rotated
* to the end of the z_all_znodes list. New znodes are inserted at the
* end of the list so we're always scanning the oldest znodes first.
*/
static int
zfs_prune_aliases(zfsvfs_t *zfsvfs, unsigned long nr_to_scan)
{
znode_t **zp_array, *zp;
int max_array = MIN(nr_to_scan, PAGE_SIZE * 8 / sizeof (znode_t *));
int objects = 0;
int i = 0, j = 0;
zp_array = kmem_zalloc(max_array * sizeof (znode_t *), KM_SLEEP);
mutex_enter(&zfsvfs->z_znodes_lock);
while ((zp = list_head(&zfsvfs->z_all_znodes)) != NULL) {
if ((i++ > nr_to_scan) || (j >= max_array))
break;
ASSERT(list_link_active(&zp->z_link_node));
list_remove(&zfsvfs->z_all_znodes, zp);
list_insert_tail(&zfsvfs->z_all_znodes, zp);
/* Skip active znodes and .zfs entries */
if (MUTEX_HELD(&zp->z_lock) || zp->z_is_ctldir)
continue;
if (igrab(ZTOI(zp)) == NULL)
continue;
zp_array[j] = zp;
j++;
}
mutex_exit(&zfsvfs->z_znodes_lock);
for (i = 0; i < j; i++) {
zp = zp_array[i];
ASSERT3P(zp, !=, NULL);
d_prune_aliases(ZTOI(zp));
if (atomic_read(&ZTOI(zp)->i_count) == 1)
objects++;
iput(ZTOI(zp));
}
kmem_free(zp_array, max_array * sizeof (znode_t *));
return (objects);
}
#endif /* HAVE_D_PRUNE_ALIASES */
Restructure per-filesystem reclaim Originally when the ARC prune callback was introduced the idea was to register a single callback for the ZPL. The ARC could invoke this call back if it needed the ZPL to drop dentries, inodes, or other cache objects which might be pinning buffers in the ARC. The ZPL would iterate over all ZFS super blocks and perform the reclaim. For the most part this design has worked well but due to limitations in 2.6.35 and earlier kernels there were some problems. This patch is designed to address those issues. 1) iterate_supers_type() is not provided by all kernels which makes it impossible to safely iterate over all zpl_fs_type filesystems in a single callback. The most straight forward and portable way to resolve this is to register a callback per-filesystem during mount. The arc_*_prune_callback() functions have always supported multiple callbacks so this is functionally a very small change. 2) Commit 050d22b removed the non-portable shrink_dcache_memory() and shrink_icache_memory() functions and didn't replace them with equivalent functionality. This meant that for Linux 3.1 and older kernels the ARC had no mechanism to drop dentries and inodes from the caches if needed. This patch adds that missing functionality by calling shrink_dcache_parent() to release dentries which may be pinning inodes. This will result in all unused cache entries being dropped which is a bit heavy handed but it's the only interface available for old kernels. 3) A zpl_drop_inode() callback is registered for kernels older than 2.6.35 which do not support the .evict_inode callback. This ensures that when the last reference on an inode is dropped it is immediately removed from the cache. If this isn't done than inode can end up on the global unused LRU with no mechanism available to ZFS to drop them. Since the ARC buffers are not dropped the hottest inodes can still be recreated without performing disk IO. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pavel Snajdr <snajpa@snajpa.net> Issue #3160
2015-03-18 01:07:47 +03:00
/*
* The ARC has requested that the filesystem drop entries from the dentry
* and inode caches. This can occur when the ARC needs to free meta data
* blocks but can't because they are all pinned by entries in these caches.
*/
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-23 00:20:43 +04:00
int
zfs_prune(struct super_block *sb, unsigned long nr_to_scan, int *objects)
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-23 00:20:43 +04:00
{
zfsvfs_t *zfsvfs = sb->s_fs_info;
Restructure per-filesystem reclaim Originally when the ARC prune callback was introduced the idea was to register a single callback for the ZPL. The ARC could invoke this call back if it needed the ZPL to drop dentries, inodes, or other cache objects which might be pinning buffers in the ARC. The ZPL would iterate over all ZFS super blocks and perform the reclaim. For the most part this design has worked well but due to limitations in 2.6.35 and earlier kernels there were some problems. This patch is designed to address those issues. 1) iterate_supers_type() is not provided by all kernels which makes it impossible to safely iterate over all zpl_fs_type filesystems in a single callback. The most straight forward and portable way to resolve this is to register a callback per-filesystem during mount. The arc_*_prune_callback() functions have always supported multiple callbacks so this is functionally a very small change. 2) Commit 050d22b removed the non-portable shrink_dcache_memory() and shrink_icache_memory() functions and didn't replace them with equivalent functionality. This meant that for Linux 3.1 and older kernels the ARC had no mechanism to drop dentries and inodes from the caches if needed. This patch adds that missing functionality by calling shrink_dcache_parent() to release dentries which may be pinning inodes. This will result in all unused cache entries being dropped which is a bit heavy handed but it's the only interface available for old kernels. 3) A zpl_drop_inode() callback is registered for kernels older than 2.6.35 which do not support the .evict_inode callback. This ensures that when the last reference on an inode is dropped it is immediately removed from the cache. If this isn't done than inode can end up on the global unused LRU with no mechanism available to ZFS to drop them. Since the ARC buffers are not dropped the hottest inodes can still be recreated without performing disk IO. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pavel Snajdr <snajpa@snajpa.net> Issue #3160
2015-03-18 01:07:47 +03:00
int error = 0;
#if defined(HAVE_SHRINK) || defined(HAVE_SPLIT_SHRINKER_CALLBACK)
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-23 00:20:43 +04:00
struct shrinker *shrinker = &sb->s_shrink;
struct shrink_control sc = {
.nr_to_scan = nr_to_scan,
.gfp_mask = GFP_KERNEL,
};
Restructure per-filesystem reclaim Originally when the ARC prune callback was introduced the idea was to register a single callback for the ZPL. The ARC could invoke this call back if it needed the ZPL to drop dentries, inodes, or other cache objects which might be pinning buffers in the ARC. The ZPL would iterate over all ZFS super blocks and perform the reclaim. For the most part this design has worked well but due to limitations in 2.6.35 and earlier kernels there were some problems. This patch is designed to address those issues. 1) iterate_supers_type() is not provided by all kernels which makes it impossible to safely iterate over all zpl_fs_type filesystems in a single callback. The most straight forward and portable way to resolve this is to register a callback per-filesystem during mount. The arc_*_prune_callback() functions have always supported multiple callbacks so this is functionally a very small change. 2) Commit 050d22b removed the non-portable shrink_dcache_memory() and shrink_icache_memory() functions and didn't replace them with equivalent functionality. This meant that for Linux 3.1 and older kernels the ARC had no mechanism to drop dentries and inodes from the caches if needed. This patch adds that missing functionality by calling shrink_dcache_parent() to release dentries which may be pinning inodes. This will result in all unused cache entries being dropped which is a bit heavy handed but it's the only interface available for old kernels. 3) A zpl_drop_inode() callback is registered for kernels older than 2.6.35 which do not support the .evict_inode callback. This ensures that when the last reference on an inode is dropped it is immediately removed from the cache. If this isn't done than inode can end up on the global unused LRU with no mechanism available to ZFS to drop them. Since the ARC buffers are not dropped the hottest inodes can still be recreated without performing disk IO. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pavel Snajdr <snajpa@snajpa.net> Issue #3160
2015-03-18 01:07:47 +03:00
#endif
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-23 00:20:43 +04:00
ZFS_ENTER(zfsvfs);
Restructure per-filesystem reclaim Originally when the ARC prune callback was introduced the idea was to register a single callback for the ZPL. The ARC could invoke this call back if it needed the ZPL to drop dentries, inodes, or other cache objects which might be pinning buffers in the ARC. The ZPL would iterate over all ZFS super blocks and perform the reclaim. For the most part this design has worked well but due to limitations in 2.6.35 and earlier kernels there were some problems. This patch is designed to address those issues. 1) iterate_supers_type() is not provided by all kernels which makes it impossible to safely iterate over all zpl_fs_type filesystems in a single callback. The most straight forward and portable way to resolve this is to register a callback per-filesystem during mount. The arc_*_prune_callback() functions have always supported multiple callbacks so this is functionally a very small change. 2) Commit 050d22b removed the non-portable shrink_dcache_memory() and shrink_icache_memory() functions and didn't replace them with equivalent functionality. This meant that for Linux 3.1 and older kernels the ARC had no mechanism to drop dentries and inodes from the caches if needed. This patch adds that missing functionality by calling shrink_dcache_parent() to release dentries which may be pinning inodes. This will result in all unused cache entries being dropped which is a bit heavy handed but it's the only interface available for old kernels. 3) A zpl_drop_inode() callback is registered for kernels older than 2.6.35 which do not support the .evict_inode callback. This ensures that when the last reference on an inode is dropped it is immediately removed from the cache. If this isn't done than inode can end up on the global unused LRU with no mechanism available to ZFS to drop them. Since the ARC buffers are not dropped the hottest inodes can still be recreated without performing disk IO. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pavel Snajdr <snajpa@snajpa.net> Issue #3160
2015-03-18 01:07:47 +03:00
#if defined(HAVE_SPLIT_SHRINKER_CALLBACK) && \
defined(SHRINK_CONTROL_HAS_NID) && \
defined(SHRINKER_NUMA_AWARE)
if (sb->s_shrink.flags & SHRINKER_NUMA_AWARE) {
*objects = 0;
for_each_online_node(sc.nid) {
*objects += (*shrinker->scan_objects)(shrinker, &sc);
}
} else {
*objects = (*shrinker->scan_objects)(shrinker, &sc);
}
#elif defined(HAVE_SPLIT_SHRINKER_CALLBACK)
*objects = (*shrinker->scan_objects)(shrinker, &sc);
Restructure per-filesystem reclaim Originally when the ARC prune callback was introduced the idea was to register a single callback for the ZPL. The ARC could invoke this call back if it needed the ZPL to drop dentries, inodes, or other cache objects which might be pinning buffers in the ARC. The ZPL would iterate over all ZFS super blocks and perform the reclaim. For the most part this design has worked well but due to limitations in 2.6.35 and earlier kernels there were some problems. This patch is designed to address those issues. 1) iterate_supers_type() is not provided by all kernels which makes it impossible to safely iterate over all zpl_fs_type filesystems in a single callback. The most straight forward and portable way to resolve this is to register a callback per-filesystem during mount. The arc_*_prune_callback() functions have always supported multiple callbacks so this is functionally a very small change. 2) Commit 050d22b removed the non-portable shrink_dcache_memory() and shrink_icache_memory() functions and didn't replace them with equivalent functionality. This meant that for Linux 3.1 and older kernels the ARC had no mechanism to drop dentries and inodes from the caches if needed. This patch adds that missing functionality by calling shrink_dcache_parent() to release dentries which may be pinning inodes. This will result in all unused cache entries being dropped which is a bit heavy handed but it's the only interface available for old kernels. 3) A zpl_drop_inode() callback is registered for kernels older than 2.6.35 which do not support the .evict_inode callback. This ensures that when the last reference on an inode is dropped it is immediately removed from the cache. If this isn't done than inode can end up on the global unused LRU with no mechanism available to ZFS to drop them. Since the ARC buffers are not dropped the hottest inodes can still be recreated without performing disk IO. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pavel Snajdr <snajpa@snajpa.net> Issue #3160
2015-03-18 01:07:47 +03:00
#elif defined(HAVE_SHRINK)
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-23 00:20:43 +04:00
*objects = (*shrinker->shrink)(shrinker, &sc);
#elif defined(HAVE_D_PRUNE_ALIASES)
#define D_PRUNE_ALIASES_IS_DEFAULT
*objects = zfs_prune_aliases(zfsvfs, nr_to_scan);
Restructure per-filesystem reclaim Originally when the ARC prune callback was introduced the idea was to register a single callback for the ZPL. The ARC could invoke this call back if it needed the ZPL to drop dentries, inodes, or other cache objects which might be pinning buffers in the ARC. The ZPL would iterate over all ZFS super blocks and perform the reclaim. For the most part this design has worked well but due to limitations in 2.6.35 and earlier kernels there were some problems. This patch is designed to address those issues. 1) iterate_supers_type() is not provided by all kernels which makes it impossible to safely iterate over all zpl_fs_type filesystems in a single callback. The most straight forward and portable way to resolve this is to register a callback per-filesystem during mount. The arc_*_prune_callback() functions have always supported multiple callbacks so this is functionally a very small change. 2) Commit 050d22b removed the non-portable shrink_dcache_memory() and shrink_icache_memory() functions and didn't replace them with equivalent functionality. This meant that for Linux 3.1 and older kernels the ARC had no mechanism to drop dentries and inodes from the caches if needed. This patch adds that missing functionality by calling shrink_dcache_parent() to release dentries which may be pinning inodes. This will result in all unused cache entries being dropped which is a bit heavy handed but it's the only interface available for old kernels. 3) A zpl_drop_inode() callback is registered for kernels older than 2.6.35 which do not support the .evict_inode callback. This ensures that when the last reference on an inode is dropped it is immediately removed from the cache. If this isn't done than inode can end up on the global unused LRU with no mechanism available to ZFS to drop them. Since the ARC buffers are not dropped the hottest inodes can still be recreated without performing disk IO. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pavel Snajdr <snajpa@snajpa.net> Issue #3160
2015-03-18 01:07:47 +03:00
#else
#error "No available dentry and inode cache pruning mechanism."
#endif
#if defined(HAVE_D_PRUNE_ALIASES) && !defined(D_PRUNE_ALIASES_IS_DEFAULT)
#undef D_PRUNE_ALIASES_IS_DEFAULT
/*
* Fall back to zfs_prune_aliases if the kernel's per-superblock
* shrinker couldn't free anything, possibly due to the inodes being
* allocated in a different memcg.
*/
if (*objects == 0)
*objects = zfs_prune_aliases(zfsvfs, nr_to_scan);
#endif
ZFS_EXIT(zfsvfs);
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-23 00:20:43 +04:00
dprintf_ds(zfsvfs->z_os->os_dsl_dataset,
Restructure per-filesystem reclaim Originally when the ARC prune callback was introduced the idea was to register a single callback for the ZPL. The ARC could invoke this call back if it needed the ZPL to drop dentries, inodes, or other cache objects which might be pinning buffers in the ARC. The ZPL would iterate over all ZFS super blocks and perform the reclaim. For the most part this design has worked well but due to limitations in 2.6.35 and earlier kernels there were some problems. This patch is designed to address those issues. 1) iterate_supers_type() is not provided by all kernels which makes it impossible to safely iterate over all zpl_fs_type filesystems in a single callback. The most straight forward and portable way to resolve this is to register a callback per-filesystem during mount. The arc_*_prune_callback() functions have always supported multiple callbacks so this is functionally a very small change. 2) Commit 050d22b removed the non-portable shrink_dcache_memory() and shrink_icache_memory() functions and didn't replace them with equivalent functionality. This meant that for Linux 3.1 and older kernels the ARC had no mechanism to drop dentries and inodes from the caches if needed. This patch adds that missing functionality by calling shrink_dcache_parent() to release dentries which may be pinning inodes. This will result in all unused cache entries being dropped which is a bit heavy handed but it's the only interface available for old kernels. 3) A zpl_drop_inode() callback is registered for kernels older than 2.6.35 which do not support the .evict_inode callback. This ensures that when the last reference on an inode is dropped it is immediately removed from the cache. If this isn't done than inode can end up on the global unused LRU with no mechanism available to ZFS to drop them. Since the ARC buffers are not dropped the hottest inodes can still be recreated without performing disk IO. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pavel Snajdr <snajpa@snajpa.net> Issue #3160
2015-03-18 01:07:47 +03:00
"pruning, nr_to_scan=%lu objects=%d error=%d\n",
nr_to_scan, *objects, error);
return (error);
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-23 00:20:43 +04:00
}
2008-11-20 23:01:55 +03:00
/*
* Teardown the zfsvfs_t.
2008-11-20 23:01:55 +03:00
*
* Note, if 'unmounting' is FALSE, we return with the 'z_teardown_lock'
2008-11-20 23:01:55 +03:00
* and 'z_teardown_inactive_lock' held.
*/
static int
zfsvfs_teardown(zfsvfs_t *zfsvfs, boolean_t unmounting)
2008-11-20 23:01:55 +03:00
{
znode_t *zp;
/*
* If someone has not already unmounted this file system,
* drain the iput_taskq to ensure all active references to the
* zfsvfs_t have been handled only then can it be safely destroyed.
*/
if (zfsvfs->z_os) {
/*
* If we're unmounting we have to wait for the list to
* drain completely.
*
* If we're not unmounting there's no guarantee the list
* will drain completely, but iputs run from the taskq
* may add the parents of dir-based xattrs to the taskq
* so we want to wait for these.
*
* We can safely read z_nr_znodes without locking because the
* VFS has already blocked operations which add to the
* z_all_znodes list and thus increment z_nr_znodes.
*/
int round = 0;
while (zfsvfs->z_nr_znodes > 0) {
taskq_wait_outstanding(dsl_pool_iput_taskq(
dmu_objset_pool(zfsvfs->z_os)), 0);
if (++round > 1 && !unmounting)
break;
}
}
rrm_enter(&zfsvfs->z_teardown_lock, RW_WRITER, FTAG);
2008-11-20 23:01:55 +03:00
if (!unmounting) {
/*
* We purge the parent filesystem's super block as the
* parent filesystem and all of its snapshots have their
* inode's super block set to the parent's filesystem's
* super block. Note, 'z_parent' is self referential
* for non-snapshots.
2008-11-20 23:01:55 +03:00
*/
shrink_dcache_sb(zfsvfs->z_parent->z_sb);
2008-11-20 23:01:55 +03:00
}
/*
* Close the zil. NB: Can't close the zil while zfs_inactive
* threads are blocked as zil_close can call zfs_inactive.
*/
if (zfsvfs->z_log) {
zil_close(zfsvfs->z_log);
zfsvfs->z_log = NULL;
2008-11-20 23:01:55 +03:00
}
rw_enter(&zfsvfs->z_teardown_inactive_lock, RW_WRITER);
2008-11-20 23:01:55 +03:00
/*
* If we are not unmounting (ie: online recv) and someone already
* unmounted this file system while we were doing the switcheroo,
* or a reopen of z_os failed then just bail out now.
*/
if (!unmounting && (zfsvfs->z_unmounted || zfsvfs->z_os == NULL)) {
rw_exit(&zfsvfs->z_teardown_inactive_lock);
rrm_exit(&zfsvfs->z_teardown_lock, FTAG);
return (SET_ERROR(EIO));
2008-11-20 23:01:55 +03:00
}
/*
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
* At this point there are no VFS ops active, and any new VFS ops
* will fail with EIO since we have z_teardown_lock for writer (only
* relevant for forced unmount).
2008-11-20 23:01:55 +03:00
*
* Release all holds on dbufs.
*/
if (!unmounting) {
mutex_enter(&zfsvfs->z_znodes_lock);
for (zp = list_head(&zfsvfs->z_all_znodes); zp != NULL;
zp = list_next(&zfsvfs->z_all_znodes, zp)) {
if (zp->z_sa_hdl)
zfs_znode_dmu_fini(zp);
}
mutex_exit(&zfsvfs->z_znodes_lock);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
}
2008-11-20 23:01:55 +03:00
/*
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
* If we are unmounting, set the unmounted flag and let new VFS ops
2008-11-20 23:01:55 +03:00
* unblock. zfs_inactive will have the unmounted behavior, and all
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
* other VFS ops will fail with EIO.
2008-11-20 23:01:55 +03:00
*/
if (unmounting) {
zfsvfs->z_unmounted = B_TRUE;
rw_exit(&zfsvfs->z_teardown_inactive_lock);
rrm_exit(&zfsvfs->z_teardown_lock, FTAG);
2008-11-20 23:01:55 +03:00
}
/*
* z_os will be NULL if there was an error in attempting to reopen
* zfsvfs, so just return as the properties had already been
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
*
2008-11-20 23:01:55 +03:00
* unregistered and cached data had been evicted before.
*/
if (zfsvfs->z_os == NULL)
2008-11-20 23:01:55 +03:00
return (0);
/*
* Unregister properties.
*/
zfs_unregister_callbacks(zfsvfs);
2008-11-20 23:01:55 +03:00
/*
* Evict cached data
*/
if (dsl_dataset_is_dirty(dmu_objset_ds(zfsvfs->z_os)) &&
!zfs_is_readonly(zfsvfs))
txg_wait_synced(dmu_objset_pool(zfsvfs->z_os), 0);
dmu_objset_evict_dbufs(zfsvfs->z_os);
2008-11-20 23:01:55 +03:00
return (0);
}
#if !defined(HAVE_2ARGS_BDI_SETUP_AND_REGISTER) && \
!defined(HAVE_3ARGS_BDI_SETUP_AND_REGISTER)
atomic_long_t zfs_bdi_seq = ATOMIC_LONG_INIT(0);
#endif
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 05:24:40 +04:00
2010-12-17 22:18:08 +03:00
int
zfs_domount(struct super_block *sb, zfs_mnt_t *zm, int silent)
2008-11-20 23:01:55 +03:00
{
const char *osname = zm->mnt_osname;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
struct inode *root_inode;
uint64_t recordsize;
int error = 0;
zfsvfs_t *zfsvfs = NULL;
vfs_t *vfs = NULL;
ASSERT(zm);
ASSERT(osname);
2008-11-20 23:01:55 +03:00
error = zfsvfs_parse_options(zm->mnt_data, &vfs);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
if (error)
return (error);
error = zfsvfs_create(osname, vfs->vfs_readonly, &zfsvfs);
if (error) {
zfsvfs_vfs_free(vfs);
goto out;
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
if ((error = dsl_prop_get_integer(osname, "recordsize",
&recordsize, NULL))) {
zfsvfs_vfs_free(vfs);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
goto out;
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
vfs->vfs_data = zfsvfs;
zfsvfs->z_vfs = vfs;
zfsvfs->z_sb = sb;
sb->s_fs_info = zfsvfs;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
sb->s_magic = ZFS_SUPER_MAGIC;
sb->s_maxbytes = MAX_LFS_FILESIZE;
sb->s_time_gran = 1;
sb->s_blocksize = recordsize;
sb->s_blocksize_bits = ilog2(recordsize);
error = -zpl_bdi_setup(sb, "zfs");
if (error)
goto out;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
sb->s_bdi->ra_pages = 0;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
/* Set callback operations for the file system. */
sb->s_op = &zpl_super_operations;
sb->s_xattr = zpl_xattr_handlers;
sb->s_export_op = &zpl_export_operations;
#ifdef HAVE_S_D_OP
sb->s_d_op = &zpl_dentry_operations;
#endif /* HAVE_S_D_OP */
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
/* Set features for file system. */
zfs_set_fuid_feature(zfsvfs);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
if (dmu_objset_is_snapshot(zfsvfs->z_os)) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
uint64_t pval;
atime_changed_cb(zfsvfs, B_FALSE);
readonly_changed_cb(zfsvfs, B_TRUE);
if ((error = dsl_prop_get_integer(osname,
"xattr", &pval, NULL)))
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
goto out;
xattr_changed_cb(zfsvfs, pval);
if ((error = dsl_prop_get_integer(osname,
"acltype", &pval, NULL)))
goto out;
acltype_changed_cb(zfsvfs, pval);
zfsvfs->z_issnap = B_TRUE;
zfsvfs->z_os->os_sync = ZFS_SYNC_DISABLED;
zfsvfs->z_snap_defer_time = jiffies;
mutex_enter(&zfsvfs->z_os->os_user_ptr_lock);
dmu_objset_set_user(zfsvfs->z_os, zfsvfs);
mutex_exit(&zfsvfs->z_os->os_user_ptr_lock);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
} else {
if ((error = zfsvfs_setup(zfsvfs, B_TRUE)))
goto out;
2008-11-20 23:01:55 +03:00
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
/* Allocate a root inode for the filesystem. */
error = zfs_root(zfsvfs, &root_inode);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
if (error) {
(void) zfs_umount(sb);
goto out;
2008-11-20 23:01:55 +03:00
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
/* Allocate a root dentry for the filesystem */
sb->s_root = d_make_root(root_inode);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
if (sb->s_root == NULL) {
(void) zfs_umount(sb);
error = SET_ERROR(ENOMEM);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
goto out;
}
if (!zfsvfs->z_issnap)
zfsctl_create(zfsvfs);
Restructure per-filesystem reclaim Originally when the ARC prune callback was introduced the idea was to register a single callback for the ZPL. The ARC could invoke this call back if it needed the ZPL to drop dentries, inodes, or other cache objects which might be pinning buffers in the ARC. The ZPL would iterate over all ZFS super blocks and perform the reclaim. For the most part this design has worked well but due to limitations in 2.6.35 and earlier kernels there were some problems. This patch is designed to address those issues. 1) iterate_supers_type() is not provided by all kernels which makes it impossible to safely iterate over all zpl_fs_type filesystems in a single callback. The most straight forward and portable way to resolve this is to register a callback per-filesystem during mount. The arc_*_prune_callback() functions have always supported multiple callbacks so this is functionally a very small change. 2) Commit 050d22b removed the non-portable shrink_dcache_memory() and shrink_icache_memory() functions and didn't replace them with equivalent functionality. This meant that for Linux 3.1 and older kernels the ARC had no mechanism to drop dentries and inodes from the caches if needed. This patch adds that missing functionality by calling shrink_dcache_parent() to release dentries which may be pinning inodes. This will result in all unused cache entries being dropped which is a bit heavy handed but it's the only interface available for old kernels. 3) A zpl_drop_inode() callback is registered for kernels older than 2.6.35 which do not support the .evict_inode callback. This ensures that when the last reference on an inode is dropped it is immediately removed from the cache. If this isn't done than inode can end up on the global unused LRU with no mechanism available to ZFS to drop them. Since the ARC buffers are not dropped the hottest inodes can still be recreated without performing disk IO. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pavel Snajdr <snajpa@snajpa.net> Issue #3160
2015-03-18 01:07:47 +03:00
zfsvfs->z_arc_prune = arc_add_prune_callback(zpl_prune_sb, sb);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
out:
if (error) {
if (zfsvfs != NULL) {
dmu_objset_disown(zfsvfs->z_os, B_TRUE, zfsvfs);
zfsvfs_free(zfsvfs);
}
/*
* make sure we don't have dangling sb->s_fs_info which
* zfs_preumount will use.
*/
sb->s_fs_info = NULL;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
}
2008-11-20 23:01:55 +03:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
return (error);
}
/*
* Called when an unmount is requested and certain sanity checks have
* already passed. At this point no dentries or inodes have been reclaimed
* from their respective caches. We drop the extra reference on the .zfs
* control directory to allow everything to be reclaimed. All snapshots
* must already have been unmounted to reach this point.
*/
void
zfs_preumount(struct super_block *sb)
{
zfsvfs_t *zfsvfs = sb->s_fs_info;
/* zfsvfs is NULL when zfs_domount fails during mount */
if (zfsvfs) {
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
zfsctl_destroy(sb->s_fs_info);
/*
* Wait for iput_async before entering evict_inodes in
* generic_shutdown_super. The reason we must finish before
* evict_inodes is when lazytime is on, or when zfs_purgedir
* calls zfs_zget, iput would bump i_count from 0 to 1. This
* would race with the i_count check in evict_inodes. This means
* it could destroy the inode while we are still using it.
*
* We wait for two passes. xattr directories in the first pass
* may add xattr entries in zfs_purgedir, so in the second pass
* we wait for them. We don't use taskq_wait here because it is
* a pool wide taskq. Other mounted filesystems can constantly
* do iput_async and there's no guarantee when taskq will be
* empty.
*/
taskq_wait_outstanding(dsl_pool_iput_taskq(
dmu_objset_pool(zfsvfs->z_os)), 0);
taskq_wait_outstanding(dsl_pool_iput_taskq(
dmu_objset_pool(zfsvfs->z_os)), 0);
}
}
/*
* Called once all other unmount released tear down has occurred.
* It is our responsibility to release any remaining infrastructure.
*/
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
/*ARGSUSED*/
int
zfs_umount(struct super_block *sb)
{
zfsvfs_t *zfsvfs = sb->s_fs_info;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
objset_t *os;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
if (zfsvfs->z_arc_prune != NULL)
arc_remove_prune_callback(zfsvfs->z_arc_prune);
VERIFY(zfsvfs_teardown(zfsvfs, B_TRUE) == 0);
os = zfsvfs->z_os;
zpl_bdi_destroy(sb);
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 05:24:40 +04:00
2008-11-20 23:01:55 +03:00
/*
* z_os will be NULL if there was an error in
* attempting to reopen zfsvfs.
2008-11-20 23:01:55 +03:00
*/
if (os != NULL) {
/*
* Unset the objset user_ptr.
*/
mutex_enter(&os->os_user_ptr_lock);
2008-11-20 23:01:55 +03:00
dmu_objset_set_user(os, NULL);
mutex_exit(&os->os_user_ptr_lock);
2008-11-20 23:01:55 +03:00
/*
* Finally release the objset
2008-11-20 23:01:55 +03:00
*/
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
dmu_objset_disown(os, B_TRUE, zfsvfs);
2008-11-20 23:01:55 +03:00
}
zfsvfs_free(zfsvfs);
2008-11-20 23:01:55 +03:00
return (0);
}
int
zfs_remount(struct super_block *sb, int *flags, zfs_mnt_t *zm)
{
zfsvfs_t *zfsvfs = sb->s_fs_info;
vfs_t *vfsp;
boolean_t issnap = dmu_objset_is_snapshot(zfsvfs->z_os);
int error;
if ((issnap || !spa_writeable(dmu_objset_spa(zfsvfs->z_os))) &&
!(*flags & MS_RDONLY)) {
*flags |= MS_RDONLY;
return (EROFS);
}
error = zfsvfs_parse_options(zm->mnt_data, &vfsp);
if (error)
return (error);
zfs_unregister_callbacks(zfsvfs);
zfsvfs_vfs_free(zfsvfs->z_vfs);
vfsp->vfs_data = zfsvfs;
zfsvfs->z_vfs = vfsp;
if (!issnap)
(void) zfs_register_callbacks(vfsp);
return (error);
}
2010-12-17 22:18:08 +03:00
int
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 22:44:07 +04:00
zfs_vget(struct super_block *sb, struct inode **ipp, fid_t *fidp)
2008-11-20 23:01:55 +03:00
{
zfsvfs_t *zfsvfs = sb->s_fs_info;
2008-11-20 23:01:55 +03:00
znode_t *zp;
uint64_t object = 0;
uint64_t fid_gen = 0;
uint64_t gen_mask;
uint64_t zp_gen;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
int i, err;
2008-11-20 23:01:55 +03:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
*ipp = NULL;
2008-11-20 23:01:55 +03:00
if (fidp->fid_len == SHORT_FID_LEN || fidp->fid_len == LONG_FID_LEN) {
zfid_short_t *zfid = (zfid_short_t *)fidp;
for (i = 0; i < sizeof (zfid->zf_object); i++)
object |= ((uint64_t)zfid->zf_object[i]) << (8 * i);
2008-11-20 23:01:55 +03:00
for (i = 0; i < sizeof (zfid->zf_gen); i++)
fid_gen |= ((uint64_t)zfid->zf_gen[i]) << (8 * i);
} else {
return (SET_ERROR(EINVAL));
}
/* LONG_FID_LEN means snapdirs */
2008-11-20 23:01:55 +03:00
if (fidp->fid_len == LONG_FID_LEN) {
zfid_long_t *zlfid = (zfid_long_t *)fidp;
uint64_t objsetid = 0;
uint64_t setgen = 0;
for (i = 0; i < sizeof (zlfid->zf_setid); i++)
objsetid |= ((uint64_t)zlfid->zf_setid[i]) << (8 * i);
for (i = 0; i < sizeof (zlfid->zf_setgen); i++)
setgen |= ((uint64_t)zlfid->zf_setgen[i]) << (8 * i);
if (objsetid != ZFSCTL_INO_SNAPDIRS - object) {
dprintf("snapdir fid: objsetid (%llu) != "
"ZFSCTL_INO_SNAPDIRS (%llu) - object (%llu)\n",
objsetid, ZFSCTL_INO_SNAPDIRS, object);
2008-11-20 23:01:55 +03:00
return (SET_ERROR(EINVAL));
}
if (fid_gen > 1 || setgen != 0) {
dprintf("snapdir fid: fid_gen (%llu) and setgen "
"(%llu)\n", fid_gen, setgen);
return (SET_ERROR(EINVAL));
}
2008-11-20 23:01:55 +03:00
return (zfsctl_snapdir_vget(sb, objsetid, fid_gen, ipp));
2008-11-20 23:01:55 +03:00
}
ZFS_ENTER(zfsvfs);
2008-11-20 23:01:55 +03:00
/* A zero fid_gen means we are in the .zfs control directories */
if (fid_gen == 0 &&
(object == ZFSCTL_INO_ROOT || object == ZFSCTL_INO_SNAPDIR)) {
*ipp = zfsvfs->z_ctldir;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
ASSERT(*ipp != NULL);
2008-11-20 23:01:55 +03:00
if (object == ZFSCTL_INO_SNAPDIR) {
VERIFY(zfsctl_root_lookup(*ipp, "snapshot", ipp,
0, kcred, NULL, NULL) == 0);
2008-11-20 23:01:55 +03:00
} else {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
igrab(*ipp);
2008-11-20 23:01:55 +03:00
}
ZFS_EXIT(zfsvfs);
2008-11-20 23:01:55 +03:00
return (0);
}
gen_mask = -1ULL >> (64 - 8 * i);
dprintf("getting %llu [%llu mask %llx]\n", object, fid_gen, gen_mask);
if ((err = zfs_zget(zfsvfs, object, &zp))) {
ZFS_EXIT(zfsvfs);
2008-11-20 23:01:55 +03:00
return (err);
}
/* Don't export xattr stuff */
if (zp->z_pflags & ZFS_XATTR) {
iput(ZTOI(zp));
ZFS_EXIT(zfsvfs);
return (SET_ERROR(ENOENT));
}
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(zfsvfs), &zp_gen,
sizeof (uint64_t));
zp_gen = zp_gen & gen_mask;
2008-11-20 23:01:55 +03:00
if (zp_gen == 0)
zp_gen = 1;
if ((fid_gen == 0) && (zfsvfs->z_root == object))
fid_gen = zp_gen;
2008-11-20 23:01:55 +03:00
if (zp->z_unlinked || zp_gen != fid_gen) {
dprintf("znode gen (%llu) != fid gen (%llu)\n", zp_gen,
fid_gen);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
iput(ZTOI(zp));
ZFS_EXIT(zfsvfs);
return (SET_ERROR(ENOENT));
2008-11-20 23:01:55 +03:00
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
*ipp = ZTOI(zp);
if (*ipp)
zfs_inode_update(ITOZ(*ipp));
ZFS_EXIT(zfsvfs);
2008-11-20 23:01:55 +03:00
return (0);
}
/*
* Block out VFS ops and close zfsvfs_t
2008-11-20 23:01:55 +03:00
*
* Note, if successful, then we return with the 'z_teardown_lock' and
* 'z_teardown_inactive_lock' write held. We leave ownership of the underlying
* dataset and objset intact so that they can be atomically handed off during
* a subsequent rollback or recv operation and the resume thereafter.
2008-11-20 23:01:55 +03:00
*/
int
zfs_suspend_fs(zfsvfs_t *zfsvfs)
2008-11-20 23:01:55 +03:00
{
int error;
if ((error = zfsvfs_teardown(zfsvfs, B_FALSE)) != 0)
2008-11-20 23:01:55 +03:00
return (error);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
2008-11-20 23:01:55 +03:00
return (0);
}
/*
* Rebuild SA and release VOPs. Note that ownership of the underlying dataset
* is an invariant across any of the operations that can be performed while the
* filesystem was suspended. Whether it succeeded or failed, the preconditions
* are the same: the relevant objset and associated dataset are owned by
* zfsvfs, held, and long held on entry.
2008-11-20 23:01:55 +03:00
*/
int
zfs_resume_fs(zfsvfs_t *zfsvfs, dsl_dataset_t *ds)
2008-11-20 23:01:55 +03:00
{
int err, err2;
znode_t *zp;
2008-11-20 23:01:55 +03:00
ASSERT(RRM_WRITE_HELD(&zfsvfs->z_teardown_lock));
ASSERT(RW_WRITE_HELD(&zfsvfs->z_teardown_inactive_lock));
2008-11-20 23:01:55 +03:00
/*
* We already own this, so just update the objset_t, as the one we
* had before may have been evicted.
*/
objset_t *os;
VERIFY3P(ds->ds_owner, ==, zfsvfs);
VERIFY(dsl_dataset_long_held(ds));
VERIFY0(dmu_objset_from_ds(ds, &os));
err = zfsvfs_init(zfsvfs, os);
if (err != 0)
goto bail;
2008-11-20 23:01:55 +03:00
VERIFY(zfsvfs_setup(zfsvfs, B_FALSE) == 0);
zfs_set_fuid_feature(zfsvfs);
zfsvfs->z_rollback_time = jiffies;
2008-11-20 23:01:55 +03:00
/*
* Attempt to re-establish all the active inodes with their
* dbufs. If a zfs_rezget() fails, then we unhash the inode
* and mark it stale. This prevents a collision if a new
* inode/object is created which must use the same inode
* number. The stale inode will be be released when the
* VFS prunes the dentry holding the remaining references
* on the stale inode.
*/
mutex_enter(&zfsvfs->z_znodes_lock);
for (zp = list_head(&zfsvfs->z_all_znodes); zp;
zp = list_next(&zfsvfs->z_all_znodes, zp)) {
err2 = zfs_rezget(zp);
if (err2) {
remove_inode_hash(ZTOI(zp));
zp->z_is_stale = B_TRUE;
2008-11-20 23:01:55 +03:00
}
}
mutex_exit(&zfsvfs->z_znodes_lock);
2008-11-20 23:01:55 +03:00
bail:
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
/* release the VFS ops */
rw_exit(&zfsvfs->z_teardown_inactive_lock);
rrm_exit(&zfsvfs->z_teardown_lock, FTAG);
2008-11-20 23:01:55 +03:00
if (err) {
/*
* Since we couldn't setup the sa framework, try to force
* unmount this file system.
2008-11-20 23:01:55 +03:00
*/
if (zfsvfs->z_os)
(void) zfs_umount(zfsvfs->z_sb);
2008-11-20 23:01:55 +03:00
}
return (err);
}
int
zfs_set_version(zfsvfs_t *zfsvfs, uint64_t newvers)
2008-11-20 23:01:55 +03:00
{
int error;
objset_t *os = zfsvfs->z_os;
2008-11-20 23:01:55 +03:00
dmu_tx_t *tx;
if (newvers < ZPL_VERSION_INITIAL || newvers > ZPL_VERSION)
return (SET_ERROR(EINVAL));
2008-11-20 23:01:55 +03:00
if (newvers < zfsvfs->z_version)
return (SET_ERROR(EINVAL));
2008-11-20 23:01:55 +03:00
if (zfs_spa_version_map(newvers) >
spa_version(dmu_objset_spa(zfsvfs->z_os)))
return (SET_ERROR(ENOTSUP));
2008-11-20 23:01:55 +03:00
tx = dmu_tx_create(os);
2009-07-03 02:44:48 +04:00
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_FALSE, ZPL_VERSION_STR);
if (newvers >= ZPL_VERSION_SA && !zfsvfs->z_use_sa) {
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_TRUE,
ZFS_SA_ATTRS);
dmu_tx_hold_zap(tx, DMU_NEW_OBJECT, FALSE, NULL);
}
2008-11-20 23:01:55 +03:00
error = dmu_tx_assign(tx, TXG_WAIT);
if (error) {
dmu_tx_abort(tx);
2009-07-03 02:44:48 +04:00
return (error);
}
2009-07-03 02:44:48 +04:00
error = zap_update(os, MASTER_NODE_OBJ, ZPL_VERSION_STR,
8, 1, &newvers, tx);
if (error) {
dmu_tx_commit(tx);
return (error);
2008-11-20 23:01:55 +03:00
}
if (newvers >= ZPL_VERSION_SA && !zfsvfs->z_use_sa) {
uint64_t sa_obj;
ASSERT3U(spa_version(dmu_objset_spa(zfsvfs->z_os)), >=,
SPA_VERSION_SA);
sa_obj = zap_create(os, DMU_OT_SA_MASTER_NODE,
DMU_OT_NONE, 0, tx);
error = zap_add(os, MASTER_NODE_OBJ,
ZFS_SA_ATTRS, 8, 1, &sa_obj, tx);
ASSERT0(error);
VERIFY(0 == sa_set_sa_object(os, sa_obj));
sa_register_update_callback(os, zfs_sa_upgrade);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 15:45:09 +04:00
spa_history_log_internal_ds(dmu_objset_ds(os), "upgrade", tx,
"from %llu to %llu", zfsvfs->z_version, newvers);
2009-07-03 02:44:48 +04:00
2008-11-20 23:01:55 +03:00
dmu_tx_commit(tx);
zfsvfs->z_version = newvers;
2009-07-03 02:44:48 +04:00
zfs_set_fuid_feature(zfsvfs);
2009-07-03 02:44:48 +04:00
return (0);
2008-11-20 23:01:55 +03:00
}
/*
* Read a property stored within the master node.
*/
int
zfs_get_zplprop(objset_t *os, zfs_prop_t prop, uint64_t *value)
{
const char *pname;
int error = SET_ERROR(ENOENT);
2008-11-20 23:01:55 +03:00
/*
* Look up the file system's value for the property. For the
* version property, we look up a slightly different string.
*/
if (prop == ZFS_PROP_VERSION)
pname = ZPL_VERSION_STR;
else
pname = zfs_prop_to_name(prop);
if (os != NULL) {
ASSERT3U(os->os_phys->os_type, ==, DMU_OST_ZFS);
error = zap_lookup(os, MASTER_NODE_OBJ, pname, 8, 1, value);
}
2008-11-20 23:01:55 +03:00
if (error == ENOENT) {
/* No value set, use the default value */
switch (prop) {
case ZFS_PROP_VERSION:
*value = ZPL_VERSION;
break;
case ZFS_PROP_NORMALIZE:
case ZFS_PROP_UTF8ONLY:
*value = 0;
break;
case ZFS_PROP_CASE:
*value = ZFS_CASE_SENSITIVE;
break;
case ZFS_PROP_ACLTYPE:
*value = ZFS_ACLTYPE_OFF;
break;
2008-11-20 23:01:55 +03:00
default:
return (error);
}
error = 0;
}
return (error);
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
/*
* Return true if the coresponding vfs's unmounted flag is set.
* Otherwise return false.
* If this function returns true we know VFS unmount has been initiated.
*/
boolean_t
zfs_get_vfs_flag_unmounted(objset_t *os)
{
zfsvfs_t *zfvp;
boolean_t unmounted = B_FALSE;
ASSERT(dmu_objset_type(os) == DMU_OST_ZFS);
mutex_enter(&os->os_user_ptr_lock);
zfvp = dmu_objset_get_user(os);
if (zfvp != NULL && zfvp->z_unmounted)
unmounted = B_TRUE;
mutex_exit(&os->os_user_ptr_lock);
return (unmounted);
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
void
zfs_init(void)
{
zfsctl_init();
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
zfs_znode_init();
dmu_objset_register_type(DMU_OST_ZFS, zfs_space_delta_cb);
register_filesystem(&zpl_fs_type);
}
void
zfs_fini(void)
{
/*
* we don't use outstanding because zpl_posix_acl_free might add more.
*/
taskq_wait(system_delay_taskq);
taskq_wait(system_taskq);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
unregister_filesystem(&zpl_fs_type);
zfs_znode_fini();
zfsctl_fini();
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 22:16:06 +03:00
}
#if defined(_KERNEL) && defined(HAVE_SPL)
EXPORT_SYMBOL(zfs_suspend_fs);
EXPORT_SYMBOL(zfs_resume_fs);
EXPORT_SYMBOL(zfs_userspace_one);
EXPORT_SYMBOL(zfs_userspace_many);
EXPORT_SYMBOL(zfs_set_userquota);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-14 01:54:54 +03:00
EXPORT_SYMBOL(zfs_id_overblockquota);
EXPORT_SYMBOL(zfs_id_overobjquota);
EXPORT_SYMBOL(zfs_id_overquota);
EXPORT_SYMBOL(zfs_set_version);
EXPORT_SYMBOL(zfsvfs_create);
EXPORT_SYMBOL(zfsvfs_free);
EXPORT_SYMBOL(zfs_is_readonly);
EXPORT_SYMBOL(zfs_domount);
EXPORT_SYMBOL(zfs_preumount);
EXPORT_SYMBOL(zfs_umount);
EXPORT_SYMBOL(zfs_remount);
EXPORT_SYMBOL(zfs_statvfs);
EXPORT_SYMBOL(zfs_vget);
EXPORT_SYMBOL(zfs_prune);
#endif