mirror_zfs/module/os/linux/zfs/arc_os.c

433 lines
11 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2018, Joyent, Inc.
* Copyright (c) 2011, 2019 by Delphix. All rights reserved.
* Copyright (c) 2014 by Saso Kiselkov. All rights reserved.
* Copyright 2017 Nexenta Systems, Inc. All rights reserved.
*/
#include <sys/spa.h>
#include <sys/zio.h>
#include <sys/spa_impl.h>
#include <sys/zio_compress.h>
#include <sys/zio_checksum.h>
#include <sys/zfs_context.h>
#include <sys/arc.h>
#include <sys/refcount.h>
#include <sys/vdev.h>
#include <sys/vdev_trim.h>
#include <sys/vdev_impl.h>
#include <sys/dsl_pool.h>
#include <sys/zio_checksum.h>
#include <sys/multilist.h>
#include <sys/abd.h>
#include <sys/zil.h>
#include <sys/fm/fs/zfs.h>
#ifdef _KERNEL
#include <sys/shrinker.h>
#include <sys/vmsystm.h>
#include <sys/zpl.h>
#include <linux/page_compat.h>
#endif
#include <sys/callb.h>
#include <sys/kstat.h>
#include <sys/zthr.h>
#include <zfs_fletcher.h>
#include <sys/arc_impl.h>
#include <sys/trace_zfs.h>
#include <sys/aggsum.h>
int64_t last_free_memory;
free_memory_reason_t last_free_reason;
/*
* Return a default max arc size based on the amount of physical memory.
*/
uint64_t
arc_default_max(uint64_t min, uint64_t allmem)
{
/* Default to 1/2 of all memory. */
return (MAX(allmem / 2, min));
}
#ifdef _KERNEL
/*
* Return maximum amount of memory that we could possibly use. Reduced
* to half of all memory in user space which is primarily used for testing.
*/
uint64_t
arc_all_memory(void)
{
#ifdef CONFIG_HIGHMEM
return (ptob(zfs_totalram_pages - zfs_totalhigh_pages));
#else
return (ptob(zfs_totalram_pages));
#endif /* CONFIG_HIGHMEM */
}
/*
* Return the amount of memory that is considered free. In user space
* which is primarily used for testing we pretend that free memory ranges
* from 0-20% of all memory.
*/
uint64_t
arc_free_memory(void)
{
#ifdef CONFIG_HIGHMEM
struct sysinfo si;
si_meminfo(&si);
return (ptob(si.freeram - si.freehigh));
#else
return (ptob(nr_free_pages() +
nr_inactive_file_pages() +
nr_inactive_anon_pages() +
nr_slab_reclaimable_pages()));
#endif /* CONFIG_HIGHMEM */
}
/*
* Additional reserve of pages for pp_reserve.
*/
int64_t arc_pages_pp_reserve = 64;
/*
* Additional reserve of pages for swapfs.
*/
int64_t arc_swapfs_reserve = 64;
/*
* Return the amount of memory that can be consumed before reclaim will be
* needed. Positive if there is sufficient free memory, negative indicates
* the amount of memory that needs to be freed up.
*/
int64_t
arc_available_memory(void)
{
int64_t lowest = INT64_MAX;
free_memory_reason_t r = FMR_UNKNOWN;
int64_t n;
Clean up OS-specific ARC and kmem code OS-specific code (e.g. under `module/os/linux`) does not need to share its code structure with any other operating systems. In particular, the ARC and kmem code need not be similar to the code in illumos, because we won't be syncing this OS-specific code between operating systems. For example, if/when illumos support is added to the common repo, we would add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of this code. Therefore, we can simplify the code in the OS-specific ARC and kmem routines. These changes do not impact system behavior, they are purely code cleanup. The changes are: Arenas are not used on Linux or FreeBSD (they are always `NULL`), so `heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along with code that uses them. In `arc_available_memory()`: * `desfree` is unused, remove it * rename `freemem` to avoid conflict with pre-existing `#define` * remove checks related to arenas * use units of bytes, rather than converting from bytes to pages and then back to bytes `SPL_KMEM_CACHE_REAP` is unused, remove it. `skc_reap` is unused, remove it. The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove it. `vmem_size()` and associated type and macros are unused, remove them. In `arc_memory_throttle()`, use a less confusing variable name to store the result of `arc_free_memory()`. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10499
2020-06-29 19:01:07 +03:00
if (arc_need_free > 0) {
lowest = -arc_need_free;
r = FMR_NEEDFREE;
}
Clean up OS-specific ARC and kmem code OS-specific code (e.g. under `module/os/linux`) does not need to share its code structure with any other operating systems. In particular, the ARC and kmem code need not be similar to the code in illumos, because we won't be syncing this OS-specific code between operating systems. For example, if/when illumos support is added to the common repo, we would add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of this code. Therefore, we can simplify the code in the OS-specific ARC and kmem routines. These changes do not impact system behavior, they are purely code cleanup. The changes are: Arenas are not used on Linux or FreeBSD (they are always `NULL`), so `heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along with code that uses them. In `arc_available_memory()`: * `desfree` is unused, remove it * rename `freemem` to avoid conflict with pre-existing `#define` * remove checks related to arenas * use units of bytes, rather than converting from bytes to pages and then back to bytes `SPL_KMEM_CACHE_REAP` is unused, remove it. `skc_reap` is unused, remove it. The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove it. `vmem_size()` and associated type and macros are unused, remove them. In `arc_memory_throttle()`, use a less confusing variable name to store the result of `arc_free_memory()`. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10499
2020-06-29 19:01:07 +03:00
n = arc_free_memory() - arc_sys_free - arc_need_free;
if (n < lowest) {
lowest = n;
Clean up OS-specific ARC and kmem code OS-specific code (e.g. under `module/os/linux`) does not need to share its code structure with any other operating systems. In particular, the ARC and kmem code need not be similar to the code in illumos, because we won't be syncing this OS-specific code between operating systems. For example, if/when illumos support is added to the common repo, we would add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of this code. Therefore, we can simplify the code in the OS-specific ARC and kmem routines. These changes do not impact system behavior, they are purely code cleanup. The changes are: Arenas are not used on Linux or FreeBSD (they are always `NULL`), so `heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along with code that uses them. In `arc_available_memory()`: * `desfree` is unused, remove it * rename `freemem` to avoid conflict with pre-existing `#define` * remove checks related to arenas * use units of bytes, rather than converting from bytes to pages and then back to bytes `SPL_KMEM_CACHE_REAP` is unused, remove it. `skc_reap` is unused, remove it. The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove it. `vmem_size()` and associated type and macros are unused, remove them. In `arc_memory_throttle()`, use a less confusing variable name to store the result of `arc_free_memory()`. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10499
2020-06-29 19:01:07 +03:00
r = FMR_LOTSFREE;
}
last_free_memory = lowest;
last_free_reason = r;
return (lowest);
}
static uint64_t
arc_evictable_memory(void)
{
int64_t asize = aggsum_value(&arc_size);
uint64_t arc_clean =
zfs_refcount_count(&arc_mru->arcs_esize[ARC_BUFC_DATA]) +
zfs_refcount_count(&arc_mru->arcs_esize[ARC_BUFC_METADATA]) +
zfs_refcount_count(&arc_mfu->arcs_esize[ARC_BUFC_DATA]) +
zfs_refcount_count(&arc_mfu->arcs_esize[ARC_BUFC_METADATA]);
uint64_t arc_dirty = MAX((int64_t)asize - (int64_t)arc_clean, 0);
/*
* Scale reported evictable memory in proportion to page cache, cap
* at specified min/max.
*/
uint64_t min = (ptob(nr_file_pages()) / 100) * zfs_arc_pc_percent;
min = MAX(arc_c_min, MIN(arc_c_max, min));
if (arc_dirty >= min)
return (arc_clean);
return (MAX((int64_t)asize - (int64_t)min, 0));
}
/*
* The _count() function returns the number of free-able objects.
* The _scan() function returns the number of objects that were freed.
*/
static unsigned long
arc_shrinker_count(struct shrinker *shrink, struct shrink_control *sc)
{
return (btop((int64_t)arc_evictable_memory()));
}
static unsigned long
arc_shrinker_scan(struct shrinker *shrink, struct shrink_control *sc)
{
int64_t pages;
/* The arc is considered warm once reclaim has occurred */
if (unlikely(arc_warm == B_FALSE))
arc_warm = B_TRUE;
/* Return the potential number of reclaimable pages */
pages = btop((int64_t)arc_evictable_memory());
/* Not allowed to perform filesystem reclaim */
if (!(sc->gfp_mask & __GFP_FS))
return (SHRINK_STOP);
/* Reclaim in progress */
if (mutex_tryenter(&arc_adjust_lock) == 0) {
ARCSTAT_INCR(arcstat_need_free, ptob(sc->nr_to_scan));
return (0);
}
mutex_exit(&arc_adjust_lock);
/*
* Evict the requested number of pages by shrinking arc_c the
* requested amount.
*/
if (pages > 0) {
arc_reduce_target_size(ptob(sc->nr_to_scan));
ARC shrinking blocks reads/writes ZFS registers a memory hook, `__arc_shrinker_func`, which is supposed to allow the ARC to shrink when the kernel experiences memory pressure. The ARC shrinker changes `arc_c` via a call to `arc_reduce_target_size()`. Before commit 3ec34e55271d433e3c, the ARC shrinker would also evict data from the ARC to bring `arc_size` down to the new `arc_c`. However, that commit (seemingly inadvertently) made it so that the ARC shrinker no longer evicts any data or waits for eviction to complete. Repeated calls to the ARC shrinker can reduce `arc_c` drastically, often all the way to `arc_c_min`. Since it doesn't wait for the actual eviction of data from the ARC, this creates a situation where `arc_size` is more than `arc_c` for the several seconds/minutes it takes for `arc_adjust_zthr` to evict data from the ARC. During this time, arc_get_data_impl() will block, so ZFS can't process read/write requests (e.g. from iSCSI, NFS, or read/write syscalls). To ensure that `arc_c` doesn't shrink faster than the adjust thread can keep up, this commit makes the ARC shrinker wait for the eviction to complete, resulting in similar behavior to what we had before commit 3ec34e55271d433e3c. Note: commit 3ec34e55271d433e3c is `OpenZFS 9284 - arc_reclaim_thread has 2 jobs` and was integrated in December 2018, and is part of ZoL 0.8.x but not 0.7.x. Additionally, when the ARC size is reduced drastically, the `arc_adjust_zthr` can be on-CPU for many seconds without blocking. Any threads that are bound to the same CPU that arc_adjust_zthr is running on will not able to run for a long time. To ensure that CPU-bound threads can make progress, this commit changes `arc_evict_state_impl()` make a voluntary preemption call, `cond_resched()`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-70703 Closes #10496
2020-06-26 20:42:27 +03:00
/*
* Repeated calls to the arc shrinker can reduce arc_c
* drastically, potentially all the way to arc_c_min. While
* arc_c is below arc_size, ZFS can't process read/write
* requests, because arc_get_data_impl() will block. To
* ensure that arc_c doesn't shrink faster than the adjust
* thread can keep up, we wait for eviction here.
*/
mutex_enter(&arc_adjust_lock);
if (arc_is_overflowing()) {
arc_adjust_needed = B_TRUE;
zthr_wakeup(arc_adjust_zthr);
(void) cv_wait(&arc_adjust_waiters_cv,
&arc_adjust_lock);
}
mutex_exit(&arc_adjust_lock);
if (current_is_kswapd())
arc_kmem_reap_soon();
pages = MAX((int64_t)pages -
(int64_t)btop(arc_evictable_memory()), 0);
/*
* We've shrunk what we can, wake up threads.
*/
cv_broadcast(&arc_adjust_waiters_cv);
} else
pages = SHRINK_STOP;
/*
* When direct reclaim is observed it usually indicates a rapid
* increase in memory pressure. This occurs because the kswapd
* threads were unable to asynchronously keep enough free memory
* available. In this case set arc_no_grow to briefly pause arc
* growth to avoid compounding the memory pressure.
*/
if (current_is_kswapd()) {
ARCSTAT_BUMP(arcstat_memory_indirect_count);
} else {
arc_no_grow = B_TRUE;
arc_kmem_reap_soon();
ARCSTAT_BUMP(arcstat_memory_direct_count);
}
return (pages);
}
SPL_SHRINKER_DECLARE(arc_shrinker,
arc_shrinker_count, arc_shrinker_scan, DEFAULT_SEEKS);
int
arc_memory_throttle(spa_t *spa, uint64_t reserve, uint64_t txg)
{
Clean up OS-specific ARC and kmem code OS-specific code (e.g. under `module/os/linux`) does not need to share its code structure with any other operating systems. In particular, the ARC and kmem code need not be similar to the code in illumos, because we won't be syncing this OS-specific code between operating systems. For example, if/when illumos support is added to the common repo, we would add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of this code. Therefore, we can simplify the code in the OS-specific ARC and kmem routines. These changes do not impact system behavior, they are purely code cleanup. The changes are: Arenas are not used on Linux or FreeBSD (they are always `NULL`), so `heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along with code that uses them. In `arc_available_memory()`: * `desfree` is unused, remove it * rename `freemem` to avoid conflict with pre-existing `#define` * remove checks related to arenas * use units of bytes, rather than converting from bytes to pages and then back to bytes `SPL_KMEM_CACHE_REAP` is unused, remove it. `skc_reap` is unused, remove it. The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove it. `vmem_size()` and associated type and macros are unused, remove them. In `arc_memory_throttle()`, use a less confusing variable name to store the result of `arc_free_memory()`. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10499
2020-06-29 19:01:07 +03:00
uint64_t free_memory = arc_free_memory();
Clean up OS-specific ARC and kmem code OS-specific code (e.g. under `module/os/linux`) does not need to share its code structure with any other operating systems. In particular, the ARC and kmem code need not be similar to the code in illumos, because we won't be syncing this OS-specific code between operating systems. For example, if/when illumos support is added to the common repo, we would add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of this code. Therefore, we can simplify the code in the OS-specific ARC and kmem routines. These changes do not impact system behavior, they are purely code cleanup. The changes are: Arenas are not used on Linux or FreeBSD (they are always `NULL`), so `heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along with code that uses them. In `arc_available_memory()`: * `desfree` is unused, remove it * rename `freemem` to avoid conflict with pre-existing `#define` * remove checks related to arenas * use units of bytes, rather than converting from bytes to pages and then back to bytes `SPL_KMEM_CACHE_REAP` is unused, remove it. `skc_reap` is unused, remove it. The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove it. `vmem_size()` and associated type and macros are unused, remove them. In `arc_memory_throttle()`, use a less confusing variable name to store the result of `arc_free_memory()`. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10499
2020-06-29 19:01:07 +03:00
if (free_memory > arc_all_memory() * arc_lotsfree_percent / 100)
return (0);
if (txg > spa->spa_lowmem_last_txg) {
spa->spa_lowmem_last_txg = txg;
spa->spa_lowmem_page_load = 0;
}
/*
* If we are in pageout, we know that memory is already tight,
* the arc is already going to be evicting, so we just want to
* continue to let page writes occur as quickly as possible.
*/
if (current_is_kswapd()) {
if (spa->spa_lowmem_page_load >
Clean up OS-specific ARC and kmem code OS-specific code (e.g. under `module/os/linux`) does not need to share its code structure with any other operating systems. In particular, the ARC and kmem code need not be similar to the code in illumos, because we won't be syncing this OS-specific code between operating systems. For example, if/when illumos support is added to the common repo, we would add a file `module/os/illumos/zfs/arc_os.c` for the illumos versions of this code. Therefore, we can simplify the code in the OS-specific ARC and kmem routines. These changes do not impact system behavior, they are purely code cleanup. The changes are: Arenas are not used on Linux or FreeBSD (they are always `NULL`), so `heap_arena`, `zio_arena`, and `zio_alloc_arena` can be removed, along with code that uses them. In `arc_available_memory()`: * `desfree` is unused, remove it * rename `freemem` to avoid conflict with pre-existing `#define` * remove checks related to arenas * use units of bytes, rather than converting from bytes to pages and then back to bytes `SPL_KMEM_CACHE_REAP` is unused, remove it. `skc_reap` is unused, remove it. The `count` argument to `spl_kmem_cache_reap_now()` is unused, remove it. `vmem_size()` and associated type and macros are unused, remove them. In `arc_memory_throttle()`, use a less confusing variable name to store the result of `arc_free_memory()`. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10499
2020-06-29 19:01:07 +03:00
MAX(arc_sys_free / 4, free_memory) / 4) {
DMU_TX_STAT_BUMP(dmu_tx_memory_reclaim);
return (SET_ERROR(ERESTART));
}
/* Note: reserve is inflated, so we deflate */
atomic_add_64(&spa->spa_lowmem_page_load, reserve / 8);
return (0);
} else if (spa->spa_lowmem_page_load > 0 && arc_reclaim_needed()) {
/* memory is low, delay before restarting */
ARCSTAT_INCR(arcstat_memory_throttle_count, 1);
DMU_TX_STAT_BUMP(dmu_tx_memory_reclaim);
return (SET_ERROR(EAGAIN));
}
spa->spa_lowmem_page_load = 0;
return (0);
}
void
arc_lowmem_init(void)
{
uint64_t allmem = arc_all_memory();
/*
* Register a shrinker to support synchronous (direct) memory
* reclaim from the arc. This is done to prevent kswapd from
* swapping out pages when it is preferable to shrink the arc.
*/
spl_register_shrinker(&arc_shrinker);
/* Set to 1/64 of all memory or a minimum of 512K */
arc_sys_free = MAX(allmem / 64, (512 * 1024));
arc_need_free = 0;
}
void
arc_lowmem_fini(void)
{
spl_unregister_shrinker(&arc_shrinker);
}
int
param_set_arc_long(const char *buf, zfs_kernel_param_t *kp)
{
int error;
error = param_set_long(buf, kp);
if (error < 0)
return (SET_ERROR(error));
arc_tuning_update(B_TRUE);
return (0);
}
int
param_set_arc_int(const char *buf, zfs_kernel_param_t *kp)
{
int error;
error = param_set_int(buf, kp);
if (error < 0)
return (SET_ERROR(error));
arc_tuning_update(B_TRUE);
return (0);
}
#else /* _KERNEL */
int64_t
arc_available_memory(void)
{
int64_t lowest = INT64_MAX;
free_memory_reason_t r = FMR_UNKNOWN;
/* Every 100 calls, free a small amount */
if (spa_get_random(100) == 0)
lowest = -1024;
last_free_memory = lowest;
last_free_reason = r;
return (lowest);
}
int
arc_memory_throttle(spa_t *spa, uint64_t reserve, uint64_t txg)
{
return (0);
}
uint64_t
arc_all_memory(void)
{
return (ptob(physmem) / 2);
}
uint64_t
arc_free_memory(void)
{
return (spa_get_random(arc_all_memory() * 20 / 100));
}
#endif /* _KERNEL */
/*
* Helper function for arc_prune_async() it is responsible for safely
* handling the execution of a registered arc_prune_func_t.
*/
static void
arc_prune_task(void *ptr)
{
arc_prune_t *ap = (arc_prune_t *)ptr;
arc_prune_func_t *func = ap->p_pfunc;
if (func != NULL)
func(ap->p_adjust, ap->p_private);
zfs_refcount_remove(&ap->p_refcnt, func);
}
/*
* Notify registered consumers they must drop holds on a portion of the ARC
* buffered they reference. This provides a mechanism to ensure the ARC can
* honor the arc_meta_limit and reclaim otherwise pinned ARC buffers. This
* is analogous to dnlc_reduce_cache() but more generic.
*
* This operation is performed asynchronously so it may be safely called
* in the context of the arc_reclaim_thread(). A reference is taken here
* for each registered arc_prune_t and the arc_prune_task() is responsible
* for releasing it once the registered arc_prune_func_t has completed.
*/
void
arc_prune_async(int64_t adjust)
{
arc_prune_t *ap;
mutex_enter(&arc_prune_mtx);
for (ap = list_head(&arc_prune_list); ap != NULL;
ap = list_next(&arc_prune_list, ap)) {
if (zfs_refcount_count(&ap->p_refcnt) >= 2)
continue;
zfs_refcount_add(&ap->p_refcnt, ap->p_pfunc);
ap->p_adjust = adjust;
if (taskq_dispatch(arc_prune_taskq, arc_prune_task,
ap, TQ_SLEEP) == TASKQID_INVALID) {
zfs_refcount_remove(&ap->p_refcnt, ap->p_pfunc);
continue;
}
ARCSTAT_BUMP(arcstat_prune);
}
mutex_exit(&arc_prune_mtx);
}