mirror_zfs/module/os/linux/zfs/zfs_debug.c

261 lines
5.9 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012, 2014 by Delphix. All rights reserved.
*/
#include <sys/zfs_context.h>
#include <sys/trace_zfs.h>
typedef struct zfs_dbgmsg {
procfs_list_node_t zdm_node;
uint64_t zdm_timestamp;
uint_t zdm_size;
Cleanup: Replace oldstyle struct hack with C99 flexible array members The Linux 5.16.14 kernel's coccicheck caught this. The semantic patch that caught it was: ./scripts/coccinelle/misc/flexible_array.cocci However, unlike the cases where the GNU zero length array extension had been used, coccicheck would not suggest patches for the older style single member arrays. That was good because blindly changing them would break size calculations in most cases. Therefore, this required care to make sure that we did not break size calculations. In the case of `indirect_split_t`, we use `offsetof(indirect_split_t, is_child[is->is_children])` to calculate size. This might be subtly wrong according to an old mailing list thread: https://inbox.sourceware.org/gcc-prs/20021226123454.27019.qmail@sources.redhat.com/T/ That is because the C99 specification should consider the flexible array members to start at the end of a structure, but compilers prefer to put padding at the end. A suggestion was made to allow compilers to allocate padding after the VLA like compilers already did: http://std.dkuug.dk/JTC1/SC22/WG14/www/docs/n983.htm However, upon thinking about it, whether or not we allocate end of structure padding does not matter, so using offsetof() to calculate the size of the structure is fine, so long as we do not mix it with sizeof() on structures with no array members. In the case that we mix them and padding causes offsetof(struct_t, vla_member[0]) to differ from sizeof(struct_t), we would be doing unsafe operations if we underallocate via `offsetof()` and then overcopy via sizeof(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #14372
2023-01-10 23:44:35 +03:00
char zdm_msg[]; /* variable length allocation */
} zfs_dbgmsg_t;
static procfs_list_t zfs_dbgmsgs;
Cleanup: Specify unsignedness on things that should not be signed In #13871, zfs_vdev_aggregation_limit_non_rotating and zfs_vdev_aggregation_limit being signed was pointed out as a possible reason not to eliminate an unnecessary MAX(unsigned, 0) since the unsigned value was assigned from them. There is no reason for these module parameters to be signed and upon inspection, it was found that there are a number of other module parameters that are signed, but should not be, so we make them unsigned. Making them unsigned made it clear that some other variables in the code should also be unsigned, so we also make those unsigned. This prevents users from setting negative values that could potentially cause bad behaviors. It also makes the code slightly easier to understand. Mostly module parameters that deal with timeouts, limits, bitshifts and percentages are made unsigned by this. Any that are boolean are left signed, since whether booleans should be considered signed or unsigned does not matter. Making zfs_arc_lotsfree_percent unsigned caused a `zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was removed. Removing the check was also necessary to prevent a compiler error from -Werror=type-limits. Several end of line comments had to be moved to their own lines because replacing int with uint_t caused us to exceed the 80 character limit enforced by cstyle.pl. The following were kept signed because they are passed to taskq_create(), which expects signed values and modifying the OpenSolaris/Illumos DDI is out of scope of this patch: * metaslab_load_pct * zfs_sync_taskq_batch_pct * zfs_zil_clean_taskq_nthr_pct * zfs_zil_clean_taskq_minalloc * zfs_zil_clean_taskq_maxalloc * zfs_arc_prune_task_threads Also, negative values in those parameters was found to be harmless. The following were left signed because either negative values make sense, or more analysis was needed to determine whether negative values should be disallowed: * zfs_metaslab_switch_threshold * zfs_pd_bytes_max * zfs_livelist_min_percent_shared zfs_multihost_history was made static to be consistent with other parameters. A number of module parameters were marked as signed, but in reality referenced unsigned variables. upgrade_errlog_limit is one of the numerous examples. In the case of zfs_vdev_async_read_max_active, it was already uint32_t, but zdb had an extern int declaration for it. Interestingly, the documentation in zfs.4 was right for upgrade_errlog_limit despite the module parameter being wrongly marked, while the documentation for zfs_vdev_async_read_max_active (and friends) was wrong. It was also wrong for zstd_abort_size, which was unsigned, but was documented as signed. Also, the documentation in zfs.4 incorrectly described the following parameters as ulong when they were int: * zfs_arc_meta_adjust_restarts * zfs_override_estimate_recordsize They are now uint_t as of this patch and thus the man page has been updated to describe them as uint. dbuf_state_index was left alone since it does nothing and perhaps should be removed in another patch. If any module parameters were missed, they were not found by `grep -r 'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed, but only because they were in files that had hits. This patch intentionally did not attempt to address whether some of these module parameters should be elevated to 64-bit parameters, because the length of a long on 32-bit is 32-bit. Lastly, it was pointed out during review that uint_t is a better match for these variables than uint32_t because FreeBSD kernel parameter definitions are designed for uint_t, whose bit width can change in future memory models. As a result, we change the existing parameters that are uint32_t to use uint_t. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Neal Gompa <ngompa@datto.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13875
2022-09-28 02:42:41 +03:00
static uint_t zfs_dbgmsg_size = 0;
static uint_t zfs_dbgmsg_maxsize = 4<<20; /* 4MB */
/*
* Internal ZFS debug messages are enabled by default.
*
* # Print debug messages
* cat /proc/spl/kstat/zfs/dbgmsg
*
* # Disable the kernel debug message log.
* echo 0 > /sys/module/zfs/parameters/zfs_dbgmsg_enable
*
* # Clear the kernel debug message log.
* echo 0 >/proc/spl/kstat/zfs/dbgmsg
*/
int zfs_dbgmsg_enable = B_TRUE;
static int
zfs_dbgmsg_show_header(struct seq_file *f)
{
seq_printf(f, "%-12s %-8s\n", "timestamp", "message");
return (0);
}
static int
zfs_dbgmsg_show(struct seq_file *f, void *p)
{
zfs_dbgmsg_t *zdm = (zfs_dbgmsg_t *)p;
seq_printf(f, "%-12llu %-s\n",
(u_longlong_t)zdm->zdm_timestamp, zdm->zdm_msg);
return (0);
}
static void
Cleanup: Specify unsignedness on things that should not be signed In #13871, zfs_vdev_aggregation_limit_non_rotating and zfs_vdev_aggregation_limit being signed was pointed out as a possible reason not to eliminate an unnecessary MAX(unsigned, 0) since the unsigned value was assigned from them. There is no reason for these module parameters to be signed and upon inspection, it was found that there are a number of other module parameters that are signed, but should not be, so we make them unsigned. Making them unsigned made it clear that some other variables in the code should also be unsigned, so we also make those unsigned. This prevents users from setting negative values that could potentially cause bad behaviors. It also makes the code slightly easier to understand. Mostly module parameters that deal with timeouts, limits, bitshifts and percentages are made unsigned by this. Any that are boolean are left signed, since whether booleans should be considered signed or unsigned does not matter. Making zfs_arc_lotsfree_percent unsigned caused a `zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was removed. Removing the check was also necessary to prevent a compiler error from -Werror=type-limits. Several end of line comments had to be moved to their own lines because replacing int with uint_t caused us to exceed the 80 character limit enforced by cstyle.pl. The following were kept signed because they are passed to taskq_create(), which expects signed values and modifying the OpenSolaris/Illumos DDI is out of scope of this patch: * metaslab_load_pct * zfs_sync_taskq_batch_pct * zfs_zil_clean_taskq_nthr_pct * zfs_zil_clean_taskq_minalloc * zfs_zil_clean_taskq_maxalloc * zfs_arc_prune_task_threads Also, negative values in those parameters was found to be harmless. The following were left signed because either negative values make sense, or more analysis was needed to determine whether negative values should be disallowed: * zfs_metaslab_switch_threshold * zfs_pd_bytes_max * zfs_livelist_min_percent_shared zfs_multihost_history was made static to be consistent with other parameters. A number of module parameters were marked as signed, but in reality referenced unsigned variables. upgrade_errlog_limit is one of the numerous examples. In the case of zfs_vdev_async_read_max_active, it was already uint32_t, but zdb had an extern int declaration for it. Interestingly, the documentation in zfs.4 was right for upgrade_errlog_limit despite the module parameter being wrongly marked, while the documentation for zfs_vdev_async_read_max_active (and friends) was wrong. It was also wrong for zstd_abort_size, which was unsigned, but was documented as signed. Also, the documentation in zfs.4 incorrectly described the following parameters as ulong when they were int: * zfs_arc_meta_adjust_restarts * zfs_override_estimate_recordsize They are now uint_t as of this patch and thus the man page has been updated to describe them as uint. dbuf_state_index was left alone since it does nothing and perhaps should be removed in another patch. If any module parameters were missed, they were not found by `grep -r 'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed, but only because they were in files that had hits. This patch intentionally did not attempt to address whether some of these module parameters should be elevated to 64-bit parameters, because the length of a long on 32-bit is 32-bit. Lastly, it was pointed out during review that uint_t is a better match for these variables than uint32_t because FreeBSD kernel parameter definitions are designed for uint_t, whose bit width can change in future memory models. As a result, we change the existing parameters that are uint32_t to use uint_t. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Neal Gompa <ngompa@datto.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13875
2022-09-28 02:42:41 +03:00
zfs_dbgmsg_purge(uint_t max_size)
{
while (zfs_dbgmsg_size > max_size) {
zfs_dbgmsg_t *zdm = list_remove_head(&zfs_dbgmsgs.pl_list);
if (zdm == NULL)
return;
Cleanup: Specify unsignedness on things that should not be signed In #13871, zfs_vdev_aggregation_limit_non_rotating and zfs_vdev_aggregation_limit being signed was pointed out as a possible reason not to eliminate an unnecessary MAX(unsigned, 0) since the unsigned value was assigned from them. There is no reason for these module parameters to be signed and upon inspection, it was found that there are a number of other module parameters that are signed, but should not be, so we make them unsigned. Making them unsigned made it clear that some other variables in the code should also be unsigned, so we also make those unsigned. This prevents users from setting negative values that could potentially cause bad behaviors. It also makes the code slightly easier to understand. Mostly module parameters that deal with timeouts, limits, bitshifts and percentages are made unsigned by this. Any that are boolean are left signed, since whether booleans should be considered signed or unsigned does not matter. Making zfs_arc_lotsfree_percent unsigned caused a `zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was removed. Removing the check was also necessary to prevent a compiler error from -Werror=type-limits. Several end of line comments had to be moved to their own lines because replacing int with uint_t caused us to exceed the 80 character limit enforced by cstyle.pl. The following were kept signed because they are passed to taskq_create(), which expects signed values and modifying the OpenSolaris/Illumos DDI is out of scope of this patch: * metaslab_load_pct * zfs_sync_taskq_batch_pct * zfs_zil_clean_taskq_nthr_pct * zfs_zil_clean_taskq_minalloc * zfs_zil_clean_taskq_maxalloc * zfs_arc_prune_task_threads Also, negative values in those parameters was found to be harmless. The following were left signed because either negative values make sense, or more analysis was needed to determine whether negative values should be disallowed: * zfs_metaslab_switch_threshold * zfs_pd_bytes_max * zfs_livelist_min_percent_shared zfs_multihost_history was made static to be consistent with other parameters. A number of module parameters were marked as signed, but in reality referenced unsigned variables. upgrade_errlog_limit is one of the numerous examples. In the case of zfs_vdev_async_read_max_active, it was already uint32_t, but zdb had an extern int declaration for it. Interestingly, the documentation in zfs.4 was right for upgrade_errlog_limit despite the module parameter being wrongly marked, while the documentation for zfs_vdev_async_read_max_active (and friends) was wrong. It was also wrong for zstd_abort_size, which was unsigned, but was documented as signed. Also, the documentation in zfs.4 incorrectly described the following parameters as ulong when they were int: * zfs_arc_meta_adjust_restarts * zfs_override_estimate_recordsize They are now uint_t as of this patch and thus the man page has been updated to describe them as uint. dbuf_state_index was left alone since it does nothing and perhaps should be removed in another patch. If any module parameters were missed, they were not found by `grep -r 'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed, but only because they were in files that had hits. This patch intentionally did not attempt to address whether some of these module parameters should be elevated to 64-bit parameters, because the length of a long on 32-bit is 32-bit. Lastly, it was pointed out during review that uint_t is a better match for these variables than uint32_t because FreeBSD kernel parameter definitions are designed for uint_t, whose bit width can change in future memory models. As a result, we change the existing parameters that are uint32_t to use uint_t. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Neal Gompa <ngompa@datto.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13875
2022-09-28 02:42:41 +03:00
uint_t size = zdm->zdm_size;
kmem_free(zdm, size);
zfs_dbgmsg_size -= size;
}
}
static int
zfs_dbgmsg_clear(procfs_list_t *procfs_list)
{
(void) procfs_list;
mutex_enter(&zfs_dbgmsgs.pl_lock);
zfs_dbgmsg_purge(0);
mutex_exit(&zfs_dbgmsgs.pl_lock);
return (0);
}
void
zfs_dbgmsg_init(void)
{
procfs_list_install("zfs",
NULL,
"dbgmsg",
0600,
&zfs_dbgmsgs,
zfs_dbgmsg_show,
zfs_dbgmsg_show_header,
zfs_dbgmsg_clear,
offsetof(zfs_dbgmsg_t, zdm_node));
}
void
zfs_dbgmsg_fini(void)
{
procfs_list_uninstall(&zfs_dbgmsgs);
zfs_dbgmsg_purge(0);
/*
* TODO - decide how to make this permanent
*/
#ifdef _KERNEL
procfs_list_destroy(&zfs_dbgmsgs);
#endif
}
void
__set_error(const char *file, const char *func, int line, int err)
{
/*
* To enable this:
*
* $ echo 512 >/sys/module/zfs/parameters/zfs_flags
*/
if (zfs_flags & ZFS_DEBUG_SET_ERROR)
__dprintf(B_FALSE, file, func, line, "error %lu",
(ulong_t)err);
}
void
__zfs_dbgmsg(char *buf)
{
Cleanup: Replace oldstyle struct hack with C99 flexible array members The Linux 5.16.14 kernel's coccicheck caught this. The semantic patch that caught it was: ./scripts/coccinelle/misc/flexible_array.cocci However, unlike the cases where the GNU zero length array extension had been used, coccicheck would not suggest patches for the older style single member arrays. That was good because blindly changing them would break size calculations in most cases. Therefore, this required care to make sure that we did not break size calculations. In the case of `indirect_split_t`, we use `offsetof(indirect_split_t, is_child[is->is_children])` to calculate size. This might be subtly wrong according to an old mailing list thread: https://inbox.sourceware.org/gcc-prs/20021226123454.27019.qmail@sources.redhat.com/T/ That is because the C99 specification should consider the flexible array members to start at the end of a structure, but compilers prefer to put padding at the end. A suggestion was made to allow compilers to allocate padding after the VLA like compilers already did: http://std.dkuug.dk/JTC1/SC22/WG14/www/docs/n983.htm However, upon thinking about it, whether or not we allocate end of structure padding does not matter, so using offsetof() to calculate the size of the structure is fine, so long as we do not mix it with sizeof() on structures with no array members. In the case that we mix them and padding causes offsetof(struct_t, vla_member[0]) to differ from sizeof(struct_t), we would be doing unsafe operations if we underallocate via `offsetof()` and then overcopy via sizeof(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #14372
2023-01-10 23:44:35 +03:00
uint_t size = sizeof (zfs_dbgmsg_t) + strlen(buf) + 1;
zfs_dbgmsg_t *zdm = kmem_zalloc(size, KM_SLEEP);
zdm->zdm_size = size;
zdm->zdm_timestamp = gethrestime_sec();
strcpy(zdm->zdm_msg, buf);
mutex_enter(&zfs_dbgmsgs.pl_lock);
procfs_list_add(&zfs_dbgmsgs, zdm);
zfs_dbgmsg_size += size;
Cleanup: Specify unsignedness on things that should not be signed In #13871, zfs_vdev_aggregation_limit_non_rotating and zfs_vdev_aggregation_limit being signed was pointed out as a possible reason not to eliminate an unnecessary MAX(unsigned, 0) since the unsigned value was assigned from them. There is no reason for these module parameters to be signed and upon inspection, it was found that there are a number of other module parameters that are signed, but should not be, so we make them unsigned. Making them unsigned made it clear that some other variables in the code should also be unsigned, so we also make those unsigned. This prevents users from setting negative values that could potentially cause bad behaviors. It also makes the code slightly easier to understand. Mostly module parameters that deal with timeouts, limits, bitshifts and percentages are made unsigned by this. Any that are boolean are left signed, since whether booleans should be considered signed or unsigned does not matter. Making zfs_arc_lotsfree_percent unsigned caused a `zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was removed. Removing the check was also necessary to prevent a compiler error from -Werror=type-limits. Several end of line comments had to be moved to their own lines because replacing int with uint_t caused us to exceed the 80 character limit enforced by cstyle.pl. The following were kept signed because they are passed to taskq_create(), which expects signed values and modifying the OpenSolaris/Illumos DDI is out of scope of this patch: * metaslab_load_pct * zfs_sync_taskq_batch_pct * zfs_zil_clean_taskq_nthr_pct * zfs_zil_clean_taskq_minalloc * zfs_zil_clean_taskq_maxalloc * zfs_arc_prune_task_threads Also, negative values in those parameters was found to be harmless. The following were left signed because either negative values make sense, or more analysis was needed to determine whether negative values should be disallowed: * zfs_metaslab_switch_threshold * zfs_pd_bytes_max * zfs_livelist_min_percent_shared zfs_multihost_history was made static to be consistent with other parameters. A number of module parameters were marked as signed, but in reality referenced unsigned variables. upgrade_errlog_limit is one of the numerous examples. In the case of zfs_vdev_async_read_max_active, it was already uint32_t, but zdb had an extern int declaration for it. Interestingly, the documentation in zfs.4 was right for upgrade_errlog_limit despite the module parameter being wrongly marked, while the documentation for zfs_vdev_async_read_max_active (and friends) was wrong. It was also wrong for zstd_abort_size, which was unsigned, but was documented as signed. Also, the documentation in zfs.4 incorrectly described the following parameters as ulong when they were int: * zfs_arc_meta_adjust_restarts * zfs_override_estimate_recordsize They are now uint_t as of this patch and thus the man page has been updated to describe them as uint. dbuf_state_index was left alone since it does nothing and perhaps should be removed in another patch. If any module parameters were missed, they were not found by `grep -r 'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed, but only because they were in files that had hits. This patch intentionally did not attempt to address whether some of these module parameters should be elevated to 64-bit parameters, because the length of a long on 32-bit is 32-bit. Lastly, it was pointed out during review that uint_t is a better match for these variables than uint32_t because FreeBSD kernel parameter definitions are designed for uint_t, whose bit width can change in future memory models. As a result, we change the existing parameters that are uint32_t to use uint_t. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Neal Gompa <ngompa@datto.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13875
2022-09-28 02:42:41 +03:00
zfs_dbgmsg_purge(zfs_dbgmsg_maxsize);
mutex_exit(&zfs_dbgmsgs.pl_lock);
}
#ifdef _KERNEL
void
__dprintf(boolean_t dprint, const char *file, const char *func,
int line, const char *fmt, ...)
{
const char *newfile;
va_list adx;
size_t size;
char *buf;
Swap DTRACE_PROBE* with Linux tracepoints This patch leverages Linux tracepoints from within the ZFS on Linux code base. It also refactors the debug code to bring it back in sync with Illumos. The information exported via tracepoints can be used for a variety of reasons (e.g. debugging, tuning, general exploration/understanding, etc). It is advantageous to use Linux tracepoints as the mechanism to export this kind of information (as opposed to something else) for a number of reasons: * A number of external tools can make use of our tracepoints "automatically" (e.g. perf, systemtap) * Tracepoints are designed to be extremely cheap when disabled * It's one of the "accepted" ways to export this kind of information; many other kernel subsystems use tracepoints too. Unfortunately, though, there are a few caveats as well: * Linux tracepoints appear to only be available to GPL licensed modules due to the way certain kernel functions are exported. Thus, to actually make use of the tracepoints introduced by this patch, one might have to patch and re-compile the kernel; exporting the necessary functions to non-GPL modules. * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux tracepoints are not available for unsigned kernel modules (tracepoints will get disabled due to the module's 'F' taint). Thus, one either has to sign the zfs kernel module prior to loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or newer. Assuming the above two requirements are satisfied, lets look at an example of how this patch can be used and what information it exposes (all commands run as 'root'): # list all zfs tracepoints available $ ls /sys/kernel/debug/tracing/events/zfs enable filter zfs_arc__delete zfs_arc__evict zfs_arc__hit zfs_arc__miss zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write zfs_new_state__mfu zfs_new_state__mru # enable all zfs tracepoints, clear the tracepoint ring buffer $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable $ echo 0 > /sys/kernel/debug/tracing/trace # import zpool called 'tank', inspect tracepoint data (each line was # truncated, they're too long for a commit message otherwise) $ zpool import tank $ cat /sys/kernel/debug/tracing/trace | head -n35 # tracer: nop # # entries-in-buffer/entries-written: 1219/1219 #P:8 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr... z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr... z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr... z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr... z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr... z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr... z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr... z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ... To highlight the kind of detailed information that is being exported using this infrastructure, I've taken the first tracepoint line from the output above and reformatted it such that it fits in 80 columns: lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr { dva 0x1:0x40082 birth 15491 cksum0 0x163edbff3a flags 0x640 datacnt 1 type 1 size 2048 spa 3133524293419867460 state_type 0 access 0 mru_hits 0 mru_ghost_hits 0 mfu_hits 0 mfu_ghost_hits 0 l2_hits 0 refcount 1 } bp { dva0 0x1:0x40082 dva1 0x1:0x3000e5 dva2 0x1:0x5a006e cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00 lsize 2048 } zb { objset 0 object 0 level -1 blkid 0 } For the specific tracepoint shown here, 'zfs_arc__miss', data is exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!). This kind of precise and detailed information can be extremely valuable when trying to answer certain kinds of questions. For anybody unfamiliar but looking to build on this, I found the XFS source code along with the following three web links to be extremely helpful: * http://lwn.net/Articles/379903/ * http://lwn.net/Articles/381064/ * http://lwn.net/Articles/383362/ I should also node the more "boring" aspects of this patch: * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to support a sixth paramter. This parameter is used to populate the contents of the new conftest.h file. If no sixth parameter is provided, conftest.h will be empty. * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced. This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro, except it has support for a fifth option that is then passed as the sixth parameter to ZFS_LINUX_COMPILE_IFELSE. These autoconf changes were needed to test the availability of the Linux tracepoint macros. Due to the odd nature of the Linux tracepoint macro API, a separate ".h" must be created (the path and filename is used internally by the kernel's define_trace.h file). * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This is to determine if we can safely enable the Linux tracepoint functionality. We need to selectively disable the tracepoint code due to the kernel exporting certain functions as GPL only. Without this check, the build process will fail at link time. In addition, the SET_ERROR macro was modified into a tracepoint as well. To do this, the 'sdt.h' file was moved into the 'include/sys' directory and now contains a userspace portion and a kernel space portion. The dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as well. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-06-13 21:54:48 +04:00
char *nl;
int i;
char *prefix = (dprint) ? "dprintf: " : "";
size = 1024;
buf = kmem_alloc(size, KM_SLEEP);
/*
* Get rid of annoying prefix to filename.
*/
newfile = strrchr(file, '/');
if (newfile != NULL) {
newfile = newfile + 1; /* Get rid of leading / */
} else {
newfile = file;
}
RAID-Z expansion feature This feature allows disks to be added one at a time to a RAID-Z group, expanding its capacity incrementally. This feature is especially useful for small pools (typically with only one RAID-Z group), where there isn't sufficient hardware to add capacity by adding a whole new RAID-Z group (typically doubling the number of disks). == Initiating expansion == A new device (disk) can be attached to an existing RAIDZ vdev, by running `zpool attach POOL raidzP-N NEW_DEVICE`, e.g. `zpool attach tank raidz2-0 sda`. The new device will become part of the RAIDZ group. A "raidz expansion" will be initiated, and the new device will contribute additional space to the RAIDZ group once the expansion completes. The `feature@raidz_expansion` on-disk feature flag must be `enabled` to initiate an expansion, and it remains `active` for the life of the pool. In other words, pools with expanded RAIDZ vdevs can not be imported by older releases of the ZFS software. == During expansion == The expansion entails reading all allocated space from existing disks in the RAIDZ group, and rewriting it to the new disks in the RAIDZ group (including the newly added device). The expansion progress can be monitored with `zpool status`. Data redundancy is maintained during (and after) the expansion. If a disk fails while the expansion is in progress, the expansion pauses until the health of the RAIDZ vdev is restored (e.g. by replacing the failed disk and waiting for reconstruction to complete). The pool remains accessible during expansion. Following a reboot or export/import, the expansion resumes where it left off. == After expansion == When the expansion completes, the additional space is available for use, and is reflected in the `available` zfs property (as seen in `zfs list`, `df`, etc). Expansion does not change the number of failures that can be tolerated without data loss (e.g. a RAIDZ2 is still a RAIDZ2 even after expansion). A RAIDZ vdev can be expanded multiple times. After the expansion completes, old blocks remain with their old data-to-parity ratio (e.g. 5-wide RAIDZ2, has 3 data to 2 parity), but distributed among the larger set of disks. New blocks will be written with the new data-to-parity ratio (e.g. a 5-wide RAIDZ2 which has been expanded once to 6-wide, has 4 data to 2 parity). However, the RAIDZ vdev's "assumed parity ratio" does not change, so slightly less space than is expected may be reported for newly-written blocks, according to `zfs list`, `df`, `ls -s`, and similar tools. Sponsored-by: The FreeBSD Foundation Sponsored-by: iXsystems, Inc. Sponsored-by: vStack Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Authored-by: Matthew Ahrens <mahrens@delphix.com> Contributions-by: Fedor Uporov <fuporov.vstack@gmail.com> Contributions-by: Stuart Maybee <stuart.maybee@comcast.net> Contributions-by: Thorsten Behrens <tbehrens@outlook.com> Contributions-by: Fmstrat <nospam@nowsci.com> Contributions-by: Don Brady <dev.fs.zfs@gmail.com> Signed-off-by: Don Brady <dev.fs.zfs@gmail.com> Closes #15022
2023-11-08 21:19:41 +03:00
i = snprintf(buf, size, "%px %s%s:%d:%s(): ",
curthread, prefix, newfile, line, func);
if (i < size) {
va_start(adx, fmt);
(void) vsnprintf(buf + i, size - i, fmt, adx);
va_end(adx);
}
Swap DTRACE_PROBE* with Linux tracepoints This patch leverages Linux tracepoints from within the ZFS on Linux code base. It also refactors the debug code to bring it back in sync with Illumos. The information exported via tracepoints can be used for a variety of reasons (e.g. debugging, tuning, general exploration/understanding, etc). It is advantageous to use Linux tracepoints as the mechanism to export this kind of information (as opposed to something else) for a number of reasons: * A number of external tools can make use of our tracepoints "automatically" (e.g. perf, systemtap) * Tracepoints are designed to be extremely cheap when disabled * It's one of the "accepted" ways to export this kind of information; many other kernel subsystems use tracepoints too. Unfortunately, though, there are a few caveats as well: * Linux tracepoints appear to only be available to GPL licensed modules due to the way certain kernel functions are exported. Thus, to actually make use of the tracepoints introduced by this patch, one might have to patch and re-compile the kernel; exporting the necessary functions to non-GPL modules. * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux tracepoints are not available for unsigned kernel modules (tracepoints will get disabled due to the module's 'F' taint). Thus, one either has to sign the zfs kernel module prior to loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or newer. Assuming the above two requirements are satisfied, lets look at an example of how this patch can be used and what information it exposes (all commands run as 'root'): # list all zfs tracepoints available $ ls /sys/kernel/debug/tracing/events/zfs enable filter zfs_arc__delete zfs_arc__evict zfs_arc__hit zfs_arc__miss zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write zfs_new_state__mfu zfs_new_state__mru # enable all zfs tracepoints, clear the tracepoint ring buffer $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable $ echo 0 > /sys/kernel/debug/tracing/trace # import zpool called 'tank', inspect tracepoint data (each line was # truncated, they're too long for a commit message otherwise) $ zpool import tank $ cat /sys/kernel/debug/tracing/trace | head -n35 # tracer: nop # # entries-in-buffer/entries-written: 1219/1219 #P:8 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr... z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr... z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr... z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr... z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr... z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr... z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr... z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ... To highlight the kind of detailed information that is being exported using this infrastructure, I've taken the first tracepoint line from the output above and reformatted it such that it fits in 80 columns: lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr { dva 0x1:0x40082 birth 15491 cksum0 0x163edbff3a flags 0x640 datacnt 1 type 1 size 2048 spa 3133524293419867460 state_type 0 access 0 mru_hits 0 mru_ghost_hits 0 mfu_hits 0 mfu_ghost_hits 0 l2_hits 0 refcount 1 } bp { dva0 0x1:0x40082 dva1 0x1:0x3000e5 dva2 0x1:0x5a006e cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00 lsize 2048 } zb { objset 0 object 0 level -1 blkid 0 } For the specific tracepoint shown here, 'zfs_arc__miss', data is exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!). This kind of precise and detailed information can be extremely valuable when trying to answer certain kinds of questions. For anybody unfamiliar but looking to build on this, I found the XFS source code along with the following three web links to be extremely helpful: * http://lwn.net/Articles/379903/ * http://lwn.net/Articles/381064/ * http://lwn.net/Articles/383362/ I should also node the more "boring" aspects of this patch: * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to support a sixth paramter. This parameter is used to populate the contents of the new conftest.h file. If no sixth parameter is provided, conftest.h will be empty. * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced. This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro, except it has support for a fifth option that is then passed as the sixth parameter to ZFS_LINUX_COMPILE_IFELSE. These autoconf changes were needed to test the availability of the Linux tracepoint macros. Due to the odd nature of the Linux tracepoint macro API, a separate ".h" must be created (the path and filename is used internally by the kernel's define_trace.h file). * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This is to determine if we can safely enable the Linux tracepoint functionality. We need to selectively disable the tracepoint code due to the kernel exporting certain functions as GPL only. Without this check, the build process will fail at link time. In addition, the SET_ERROR macro was modified into a tracepoint as well. To do this, the 'sdt.h' file was moved into the 'include/sys' directory and now contains a userspace portion and a kernel space portion. The dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as well. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-06-13 21:54:48 +04:00
/*
* Get rid of trailing newline for dprintf logs.
Swap DTRACE_PROBE* with Linux tracepoints This patch leverages Linux tracepoints from within the ZFS on Linux code base. It also refactors the debug code to bring it back in sync with Illumos. The information exported via tracepoints can be used for a variety of reasons (e.g. debugging, tuning, general exploration/understanding, etc). It is advantageous to use Linux tracepoints as the mechanism to export this kind of information (as opposed to something else) for a number of reasons: * A number of external tools can make use of our tracepoints "automatically" (e.g. perf, systemtap) * Tracepoints are designed to be extremely cheap when disabled * It's one of the "accepted" ways to export this kind of information; many other kernel subsystems use tracepoints too. Unfortunately, though, there are a few caveats as well: * Linux tracepoints appear to only be available to GPL licensed modules due to the way certain kernel functions are exported. Thus, to actually make use of the tracepoints introduced by this patch, one might have to patch and re-compile the kernel; exporting the necessary functions to non-GPL modules. * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux tracepoints are not available for unsigned kernel modules (tracepoints will get disabled due to the module's 'F' taint). Thus, one either has to sign the zfs kernel module prior to loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or newer. Assuming the above two requirements are satisfied, lets look at an example of how this patch can be used and what information it exposes (all commands run as 'root'): # list all zfs tracepoints available $ ls /sys/kernel/debug/tracing/events/zfs enable filter zfs_arc__delete zfs_arc__evict zfs_arc__hit zfs_arc__miss zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write zfs_new_state__mfu zfs_new_state__mru # enable all zfs tracepoints, clear the tracepoint ring buffer $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable $ echo 0 > /sys/kernel/debug/tracing/trace # import zpool called 'tank', inspect tracepoint data (each line was # truncated, they're too long for a commit message otherwise) $ zpool import tank $ cat /sys/kernel/debug/tracing/trace | head -n35 # tracer: nop # # entries-in-buffer/entries-written: 1219/1219 #P:8 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr... z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr... z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr... z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr... z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr... z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr... z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr... z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ... To highlight the kind of detailed information that is being exported using this infrastructure, I've taken the first tracepoint line from the output above and reformatted it such that it fits in 80 columns: lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr { dva 0x1:0x40082 birth 15491 cksum0 0x163edbff3a flags 0x640 datacnt 1 type 1 size 2048 spa 3133524293419867460 state_type 0 access 0 mru_hits 0 mru_ghost_hits 0 mfu_hits 0 mfu_ghost_hits 0 l2_hits 0 refcount 1 } bp { dva0 0x1:0x40082 dva1 0x1:0x3000e5 dva2 0x1:0x5a006e cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00 lsize 2048 } zb { objset 0 object 0 level -1 blkid 0 } For the specific tracepoint shown here, 'zfs_arc__miss', data is exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!). This kind of precise and detailed information can be extremely valuable when trying to answer certain kinds of questions. For anybody unfamiliar but looking to build on this, I found the XFS source code along with the following three web links to be extremely helpful: * http://lwn.net/Articles/379903/ * http://lwn.net/Articles/381064/ * http://lwn.net/Articles/383362/ I should also node the more "boring" aspects of this patch: * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to support a sixth paramter. This parameter is used to populate the contents of the new conftest.h file. If no sixth parameter is provided, conftest.h will be empty. * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced. This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro, except it has support for a fifth option that is then passed as the sixth parameter to ZFS_LINUX_COMPILE_IFELSE. These autoconf changes were needed to test the availability of the Linux tracepoint macros. Due to the odd nature of the Linux tracepoint macro API, a separate ".h" must be created (the path and filename is used internally by the kernel's define_trace.h file). * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This is to determine if we can safely enable the Linux tracepoint functionality. We need to selectively disable the tracepoint code due to the kernel exporting certain functions as GPL only. Without this check, the build process will fail at link time. In addition, the SET_ERROR macro was modified into a tracepoint as well. To do this, the 'sdt.h' file was moved into the 'include/sys' directory and now contains a userspace portion and a kernel space portion. The dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as well. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-06-13 21:54:48 +04:00
*/
if (dprint && buf[0] != '\0') {
nl = &buf[strlen(buf) - 1];
if (*nl == '\n')
*nl = '\0';
}
Swap DTRACE_PROBE* with Linux tracepoints This patch leverages Linux tracepoints from within the ZFS on Linux code base. It also refactors the debug code to bring it back in sync with Illumos. The information exported via tracepoints can be used for a variety of reasons (e.g. debugging, tuning, general exploration/understanding, etc). It is advantageous to use Linux tracepoints as the mechanism to export this kind of information (as opposed to something else) for a number of reasons: * A number of external tools can make use of our tracepoints "automatically" (e.g. perf, systemtap) * Tracepoints are designed to be extremely cheap when disabled * It's one of the "accepted" ways to export this kind of information; many other kernel subsystems use tracepoints too. Unfortunately, though, there are a few caveats as well: * Linux tracepoints appear to only be available to GPL licensed modules due to the way certain kernel functions are exported. Thus, to actually make use of the tracepoints introduced by this patch, one might have to patch and re-compile the kernel; exporting the necessary functions to non-GPL modules. * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux tracepoints are not available for unsigned kernel modules (tracepoints will get disabled due to the module's 'F' taint). Thus, one either has to sign the zfs kernel module prior to loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or newer. Assuming the above two requirements are satisfied, lets look at an example of how this patch can be used and what information it exposes (all commands run as 'root'): # list all zfs tracepoints available $ ls /sys/kernel/debug/tracing/events/zfs enable filter zfs_arc__delete zfs_arc__evict zfs_arc__hit zfs_arc__miss zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write zfs_new_state__mfu zfs_new_state__mru # enable all zfs tracepoints, clear the tracepoint ring buffer $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable $ echo 0 > /sys/kernel/debug/tracing/trace # import zpool called 'tank', inspect tracepoint data (each line was # truncated, they're too long for a commit message otherwise) $ zpool import tank $ cat /sys/kernel/debug/tracing/trace | head -n35 # tracer: nop # # entries-in-buffer/entries-written: 1219/1219 #P:8 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr... z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr... z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr... z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr... z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr... z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr... z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr... z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ... To highlight the kind of detailed information that is being exported using this infrastructure, I've taken the first tracepoint line from the output above and reformatted it such that it fits in 80 columns: lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr { dva 0x1:0x40082 birth 15491 cksum0 0x163edbff3a flags 0x640 datacnt 1 type 1 size 2048 spa 3133524293419867460 state_type 0 access 0 mru_hits 0 mru_ghost_hits 0 mfu_hits 0 mfu_ghost_hits 0 l2_hits 0 refcount 1 } bp { dva0 0x1:0x40082 dva1 0x1:0x3000e5 dva2 0x1:0x5a006e cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00 lsize 2048 } zb { objset 0 object 0 level -1 blkid 0 } For the specific tracepoint shown here, 'zfs_arc__miss', data is exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!). This kind of precise and detailed information can be extremely valuable when trying to answer certain kinds of questions. For anybody unfamiliar but looking to build on this, I found the XFS source code along with the following three web links to be extremely helpful: * http://lwn.net/Articles/379903/ * http://lwn.net/Articles/381064/ * http://lwn.net/Articles/383362/ I should also node the more "boring" aspects of this patch: * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to support a sixth paramter. This parameter is used to populate the contents of the new conftest.h file. If no sixth parameter is provided, conftest.h will be empty. * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced. This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro, except it has support for a fifth option that is then passed as the sixth parameter to ZFS_LINUX_COMPILE_IFELSE. These autoconf changes were needed to test the availability of the Linux tracepoint macros. Due to the odd nature of the Linux tracepoint macro API, a separate ".h" must be created (the path and filename is used internally by the kernel's define_trace.h file). * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This is to determine if we can safely enable the Linux tracepoint functionality. We need to selectively disable the tracepoint code due to the kernel exporting certain functions as GPL only. Without this check, the build process will fail at link time. In addition, the SET_ERROR macro was modified into a tracepoint as well. To do this, the 'sdt.h' file was moved into the 'include/sys' directory and now contains a userspace portion and a kernel space portion. The dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as well. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-06-13 21:54:48 +04:00
/*
* To get this data enable the zfs__dprintf trace point as shown:
*
* # Enable zfs__dprintf tracepoint, clear the tracepoint ring buffer
* $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable
* $ echo 0 > /sys/kernel/debug/tracing/trace
*
* # Dump the ring buffer.
* $ cat /sys/kernel/debug/tracing/trace
*/
DTRACE_PROBE1(zfs__dprintf, char *, buf);
/*
* To get this data:
*
* $ cat /proc/spl/kstat/zfs/dbgmsg
*
* To clear the buffer:
* $ echo 0 > /proc/spl/kstat/zfs/dbgmsg
*/
__zfs_dbgmsg(buf);
kmem_free(buf, size);
}
#else
void
zfs_dbgmsg_print(const char *tag)
{
ssize_t ret __attribute__((unused));
/*
* We use write() in this function instead of printf()
* so it is safe to call from a signal handler.
*/
ret = write(STDOUT_FILENO, "ZFS_DBGMSG(", 11);
ret = write(STDOUT_FILENO, tag, strlen(tag));
ret = write(STDOUT_FILENO, ") START:\n", 9);
mutex_enter(&zfs_dbgmsgs.pl_lock);
for (zfs_dbgmsg_t *zdm = list_head(&zfs_dbgmsgs.pl_list); zdm != NULL;
zdm = list_next(&zfs_dbgmsgs.pl_list, zdm)) {
ret = write(STDOUT_FILENO, zdm->zdm_msg,
strlen(zdm->zdm_msg));
ret = write(STDOUT_FILENO, "\n", 1);
}
ret = write(STDOUT_FILENO, "ZFS_DBGMSG(", 11);
ret = write(STDOUT_FILENO, tag, strlen(tag));
ret = write(STDOUT_FILENO, ") END\n", 6);
mutex_exit(&zfs_dbgmsgs.pl_lock);
}
#endif /* _KERNEL */
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
#ifdef _KERNEL
module_param(zfs_dbgmsg_enable, int, 0644);
MODULE_PARM_DESC(zfs_dbgmsg_enable, "Enable ZFS debug message log");
Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962 3956 ::vdev -r should work with pipelines 3957 ztest should update the cachefile before killing itself 3958 multiple scans can lead to partial resilvering 3959 ddt entries are not always resilvered 3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth 3961 freed gang blocks are not resilvered and can cause pool to suspend 3962 ztest should print out zfs debug buffer before exiting Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: https://www.illumos.org/issues/3956 https://www.illumos.org/issues/3957 https://www.illumos.org/issues/3958 https://www.illumos.org/issues/3959 https://www.illumos.org/issues/3960 https://www.illumos.org/issues/3961 https://www.illumos.org/issues/3962 illumos/illumos-gate@b4952e17e8858d3225793b28788278de9fe6038d Ported-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting notes: 1. zfs_dbgmsg_print() is only used in userland. Since we do not have mdb on Linux, it does not make sense to make it available in the kernel. This means that a build failure will occur if any future kernel patch depends on it. However, that is unlikely given that this functionality was added to support zdb. 2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels. This preserves the existing behavior of minimal noise when running with -V, and -VV. 3. In vdev_config_generate() the call to nvlist_alloc() was not changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in the txg_sync context.
2013-08-08 00:16:22 +04:00
Cleanup: Specify unsignedness on things that should not be signed In #13871, zfs_vdev_aggregation_limit_non_rotating and zfs_vdev_aggregation_limit being signed was pointed out as a possible reason not to eliminate an unnecessary MAX(unsigned, 0) since the unsigned value was assigned from them. There is no reason for these module parameters to be signed and upon inspection, it was found that there are a number of other module parameters that are signed, but should not be, so we make them unsigned. Making them unsigned made it clear that some other variables in the code should also be unsigned, so we also make those unsigned. This prevents users from setting negative values that could potentially cause bad behaviors. It also makes the code slightly easier to understand. Mostly module parameters that deal with timeouts, limits, bitshifts and percentages are made unsigned by this. Any that are boolean are left signed, since whether booleans should be considered signed or unsigned does not matter. Making zfs_arc_lotsfree_percent unsigned caused a `zfs_arc_lotsfree_percent >= 0` check to become redundant, so it was removed. Removing the check was also necessary to prevent a compiler error from -Werror=type-limits. Several end of line comments had to be moved to their own lines because replacing int with uint_t caused us to exceed the 80 character limit enforced by cstyle.pl. The following were kept signed because they are passed to taskq_create(), which expects signed values and modifying the OpenSolaris/Illumos DDI is out of scope of this patch: * metaslab_load_pct * zfs_sync_taskq_batch_pct * zfs_zil_clean_taskq_nthr_pct * zfs_zil_clean_taskq_minalloc * zfs_zil_clean_taskq_maxalloc * zfs_arc_prune_task_threads Also, negative values in those parameters was found to be harmless. The following were left signed because either negative values make sense, or more analysis was needed to determine whether negative values should be disallowed: * zfs_metaslab_switch_threshold * zfs_pd_bytes_max * zfs_livelist_min_percent_shared zfs_multihost_history was made static to be consistent with other parameters. A number of module parameters were marked as signed, but in reality referenced unsigned variables. upgrade_errlog_limit is one of the numerous examples. In the case of zfs_vdev_async_read_max_active, it was already uint32_t, but zdb had an extern int declaration for it. Interestingly, the documentation in zfs.4 was right for upgrade_errlog_limit despite the module parameter being wrongly marked, while the documentation for zfs_vdev_async_read_max_active (and friends) was wrong. It was also wrong for zstd_abort_size, which was unsigned, but was documented as signed. Also, the documentation in zfs.4 incorrectly described the following parameters as ulong when they were int: * zfs_arc_meta_adjust_restarts * zfs_override_estimate_recordsize They are now uint_t as of this patch and thus the man page has been updated to describe them as uint. dbuf_state_index was left alone since it does nothing and perhaps should be removed in another patch. If any module parameters were missed, they were not found by `grep -r 'ZFS_MODULE_PARAM' | grep ', INT'`. I did find a few that grep missed, but only because they were in files that had hits. This patch intentionally did not attempt to address whether some of these module parameters should be elevated to 64-bit parameters, because the length of a long on 32-bit is 32-bit. Lastly, it was pointed out during review that uint_t is a better match for these variables than uint32_t because FreeBSD kernel parameter definitions are designed for uint_t, whose bit width can change in future memory models. As a result, we change the existing parameters that are uint32_t to use uint_t. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Neal Gompa <ngompa@datto.com> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13875
2022-09-28 02:42:41 +03:00
/* BEGIN CSTYLED */
module_param(zfs_dbgmsg_maxsize, uint, 0644);
/* END CSTYLED */
MODULE_PARM_DESC(zfs_dbgmsg_maxsize, "Maximum ZFS debug log size");
#endif