Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
/*
|
|
|
|
* CDDL HEADER START
|
|
|
|
*
|
|
|
|
* This file and its contents are supplied under the terms of the
|
|
|
|
* Common Development and Distribution License ("CDDL"), version 1.0.
|
|
|
|
* You may only use this file in accordance with the terms of version
|
|
|
|
* 1.0 of the CDDL.
|
|
|
|
*
|
|
|
|
* A full copy of the text of the CDDL should have accompanied this
|
|
|
|
* source. A copy of the CDDL is also available via the Internet at
|
|
|
|
* http://www.illumos.org/license/CDDL.
|
|
|
|
*
|
|
|
|
* CDDL HEADER END
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Copyright (c) 2018 by Delphix. All rights reserved.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include <libzfs_core.h>
|
2019-12-06 00:06:51 +03:00
|
|
|
#include <libzutil.h>
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
|
|
|
#include <sys/nvpair.h>
|
2020-09-16 01:42:27 +03:00
|
|
|
#include <sys/vdev_impl.h>
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
#include <sys/zfs_ioctl.h>
|
2020-09-16 01:42:27 +03:00
|
|
|
#include <sys/zfs_bootenv.h>
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Test the nvpair inputs for the non-legacy zfs ioctl commands.
|
|
|
|
*/
|
|
|
|
|
2022-01-22 03:56:46 +03:00
|
|
|
static boolean_t unexpected_failures;
|
|
|
|
static int zfs_fd;
|
|
|
|
static const char *active_test;
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Tracks which zfs_ioc_t commands were tested
|
|
|
|
*/
|
2022-01-22 03:56:46 +03:00
|
|
|
static boolean_t ioc_tested[ZFS_IOC_LAST - ZFS_IOC_FIRST];
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Legacy ioctls that are skipped (for now)
|
|
|
|
*/
|
2022-01-22 03:56:46 +03:00
|
|
|
static const zfs_ioc_t ioc_skip[] = {
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
ZFS_IOC_POOL_CREATE,
|
|
|
|
ZFS_IOC_POOL_DESTROY,
|
|
|
|
ZFS_IOC_POOL_IMPORT,
|
|
|
|
ZFS_IOC_POOL_EXPORT,
|
|
|
|
ZFS_IOC_POOL_CONFIGS,
|
|
|
|
ZFS_IOC_POOL_STATS,
|
|
|
|
ZFS_IOC_POOL_TRYIMPORT,
|
|
|
|
ZFS_IOC_POOL_SCAN,
|
|
|
|
ZFS_IOC_POOL_FREEZE,
|
|
|
|
ZFS_IOC_POOL_UPGRADE,
|
|
|
|
ZFS_IOC_POOL_GET_HISTORY,
|
|
|
|
|
|
|
|
ZFS_IOC_VDEV_ADD,
|
|
|
|
ZFS_IOC_VDEV_REMOVE,
|
|
|
|
ZFS_IOC_VDEV_SET_STATE,
|
|
|
|
ZFS_IOC_VDEV_ATTACH,
|
|
|
|
ZFS_IOC_VDEV_DETACH,
|
|
|
|
ZFS_IOC_VDEV_SETPATH,
|
|
|
|
ZFS_IOC_VDEV_SETFRU,
|
|
|
|
|
|
|
|
ZFS_IOC_OBJSET_STATS,
|
|
|
|
ZFS_IOC_OBJSET_ZPLPROPS,
|
|
|
|
ZFS_IOC_DATASET_LIST_NEXT,
|
|
|
|
ZFS_IOC_SNAPSHOT_LIST_NEXT,
|
|
|
|
ZFS_IOC_SET_PROP,
|
|
|
|
ZFS_IOC_DESTROY,
|
|
|
|
ZFS_IOC_RENAME,
|
|
|
|
ZFS_IOC_RECV,
|
|
|
|
ZFS_IOC_SEND,
|
|
|
|
ZFS_IOC_INJECT_FAULT,
|
|
|
|
ZFS_IOC_CLEAR_FAULT,
|
|
|
|
ZFS_IOC_INJECT_LIST_NEXT,
|
|
|
|
ZFS_IOC_ERROR_LOG,
|
|
|
|
ZFS_IOC_CLEAR,
|
|
|
|
ZFS_IOC_PROMOTE,
|
|
|
|
ZFS_IOC_DSOBJ_TO_DSNAME,
|
|
|
|
ZFS_IOC_OBJ_TO_PATH,
|
|
|
|
ZFS_IOC_POOL_SET_PROPS,
|
|
|
|
ZFS_IOC_POOL_GET_PROPS,
|
|
|
|
ZFS_IOC_SET_FSACL,
|
|
|
|
ZFS_IOC_GET_FSACL,
|
|
|
|
ZFS_IOC_SHARE,
|
|
|
|
ZFS_IOC_INHERIT_PROP,
|
|
|
|
ZFS_IOC_SMB_ACL,
|
|
|
|
ZFS_IOC_USERSPACE_ONE,
|
|
|
|
ZFS_IOC_USERSPACE_MANY,
|
|
|
|
ZFS_IOC_USERSPACE_UPGRADE,
|
|
|
|
ZFS_IOC_OBJSET_RECVD_PROPS,
|
|
|
|
ZFS_IOC_VDEV_SPLIT,
|
|
|
|
ZFS_IOC_NEXT_OBJ,
|
|
|
|
ZFS_IOC_DIFF,
|
|
|
|
ZFS_IOC_TMP_SNAPSHOT,
|
|
|
|
ZFS_IOC_OBJ_TO_STATS,
|
|
|
|
ZFS_IOC_SPACE_WRITTEN,
|
|
|
|
ZFS_IOC_POOL_REGUID,
|
|
|
|
ZFS_IOC_SEND_PROGRESS,
|
|
|
|
ZFS_IOC_EVENTS_NEXT,
|
|
|
|
ZFS_IOC_EVENTS_CLEAR,
|
|
|
|
ZFS_IOC_EVENTS_SEEK,
|
2019-12-06 00:06:51 +03:00
|
|
|
ZFS_IOC_NEXTBOOT,
|
|
|
|
ZFS_IOC_JAIL,
|
|
|
|
ZFS_IOC_UNJAIL,
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
#define IOC_INPUT_TEST(ioc, name, req, opt, err) \
|
|
|
|
IOC_INPUT_TEST_IMPL(ioc, name, req, opt, err, B_FALSE)
|
|
|
|
|
|
|
|
#define IOC_INPUT_TEST_WILD(ioc, name, req, opt, err) \
|
|
|
|
IOC_INPUT_TEST_IMPL(ioc, name, req, opt, err, B_TRUE)
|
|
|
|
|
|
|
|
#define IOC_INPUT_TEST_IMPL(ioc, name, req, opt, err, wild) \
|
|
|
|
do { \
|
|
|
|
active_test = __func__ + 5; \
|
|
|
|
ioc_tested[ioc - ZFS_IOC_FIRST] = B_TRUE; \
|
|
|
|
lzc_ioctl_test(ioc, name, req, opt, err, wild); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* run a zfs ioctl command, verify expected results and log failures
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
lzc_ioctl_run(zfs_ioc_t ioc, const char *name, nvlist_t *innvl, int expected)
|
|
|
|
{
|
|
|
|
zfs_cmd_t zc = {"\0"};
|
|
|
|
char *packed = NULL;
|
|
|
|
const char *variant;
|
|
|
|
size_t size = 0;
|
|
|
|
int error = 0;
|
|
|
|
|
|
|
|
switch (expected) {
|
|
|
|
case ZFS_ERR_IOC_ARG_UNAVAIL:
|
|
|
|
variant = "unsupported input";
|
|
|
|
break;
|
|
|
|
case ZFS_ERR_IOC_ARG_REQUIRED:
|
|
|
|
variant = "missing input";
|
|
|
|
break;
|
|
|
|
case ZFS_ERR_IOC_ARG_BADTYPE:
|
|
|
|
variant = "invalid input type";
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
variant = "valid input";
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
packed = fnvlist_pack(innvl, &size);
|
2018-11-20 21:37:49 +03:00
|
|
|
(void) strlcpy(zc.zc_name, name, sizeof (zc.zc_name));
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
zc.zc_name[sizeof (zc.zc_name) - 1] = '\0';
|
|
|
|
zc.zc_nvlist_src = (uint64_t)(uintptr_t)packed;
|
|
|
|
zc.zc_nvlist_src_size = size;
|
|
|
|
zc.zc_nvlist_dst_size = MAX(size * 2, 128 * 1024);
|
|
|
|
zc.zc_nvlist_dst = (uint64_t)(uintptr_t)malloc(zc.zc_nvlist_dst_size);
|
|
|
|
|
2021-10-07 20:31:26 +03:00
|
|
|
if (lzc_ioctl_fd(zfs_fd, ioc, &zc) != 0)
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
error = errno;
|
|
|
|
|
|
|
|
if (error != expected) {
|
|
|
|
unexpected_failures = B_TRUE;
|
|
|
|
(void) fprintf(stderr, "%s: Unexpected result with %s, "
|
|
|
|
"error %d (expecting %d)\n",
|
|
|
|
active_test, variant, error, expected);
|
|
|
|
}
|
|
|
|
|
|
|
|
fnvlist_pack_free(packed, size);
|
|
|
|
free((void *)(uintptr_t)zc.zc_nvlist_dst);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2019-03-29 19:13:20 +03:00
|
|
|
* Test each ioc for the following ioctl input errors:
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
* ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
|
|
|
|
* ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
|
|
|
|
* ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
lzc_ioctl_test(zfs_ioc_t ioc, const char *name, nvlist_t *required,
|
|
|
|
nvlist_t *optional, int expected_error, boolean_t wildcard)
|
|
|
|
{
|
|
|
|
nvlist_t *input = fnvlist_alloc();
|
|
|
|
nvlist_t *future = fnvlist_alloc();
|
|
|
|
int error = 0;
|
|
|
|
|
|
|
|
if (required != NULL) {
|
|
|
|
for (nvpair_t *pair = nvlist_next_nvpair(required, NULL);
|
|
|
|
pair != NULL; pair = nvlist_next_nvpair(required, pair)) {
|
|
|
|
fnvlist_add_nvpair(input, pair);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (optional != NULL) {
|
|
|
|
for (nvpair_t *pair = nvlist_next_nvpair(optional, NULL);
|
|
|
|
pair != NULL; pair = nvlist_next_nvpair(optional, pair)) {
|
|
|
|
fnvlist_add_nvpair(input, pair);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Generic input run with 'optional' nvlist pair
|
|
|
|
*/
|
|
|
|
if (!wildcard)
|
|
|
|
fnvlist_add_nvlist(input, "optional", future);
|
|
|
|
lzc_ioctl_run(ioc, name, input, expected_error);
|
|
|
|
if (!wildcard)
|
|
|
|
fnvlist_remove(input, "optional");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Bogus input value
|
|
|
|
*/
|
|
|
|
if (!wildcard) {
|
|
|
|
fnvlist_add_string(input, "bogus_input", "bogus");
|
|
|
|
lzc_ioctl_run(ioc, name, input, ZFS_ERR_IOC_ARG_UNAVAIL);
|
|
|
|
fnvlist_remove(input, "bogus_input");
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Missing required inputs
|
|
|
|
*/
|
|
|
|
if (required != NULL) {
|
|
|
|
nvlist_t *empty = fnvlist_alloc();
|
|
|
|
lzc_ioctl_run(ioc, name, empty, ZFS_ERR_IOC_ARG_REQUIRED);
|
|
|
|
nvlist_free(empty);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Wrong nvpair type
|
|
|
|
*/
|
|
|
|
if (required != NULL || optional != NULL) {
|
|
|
|
/*
|
|
|
|
* switch the type of one of the input pairs
|
|
|
|
*/
|
|
|
|
for (nvpair_t *pair = nvlist_next_nvpair(input, NULL);
|
|
|
|
pair != NULL; pair = nvlist_next_nvpair(input, pair)) {
|
|
|
|
char pname[MAXNAMELEN];
|
|
|
|
data_type_t ptype;
|
|
|
|
|
2018-11-20 21:37:49 +03:00
|
|
|
strlcpy(pname, nvpair_name(pair), sizeof (pname));
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
pname[sizeof (pname) - 1] = '\0';
|
|
|
|
ptype = nvpair_type(pair);
|
|
|
|
fnvlist_remove_nvpair(input, pair);
|
|
|
|
|
|
|
|
switch (ptype) {
|
|
|
|
case DATA_TYPE_STRING:
|
|
|
|
fnvlist_add_uint64(input, pname, 42);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
fnvlist_add_string(input, pname, "bogus");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
lzc_ioctl_run(ioc, name, input, ZFS_ERR_IOC_ARG_BADTYPE);
|
|
|
|
}
|
|
|
|
|
|
|
|
nvlist_free(future);
|
|
|
|
nvlist_free(input);
|
|
|
|
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_pool_sync(const char *pool)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_boolean_value(required, "force", B_TRUE);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_POOL_SYNC, pool, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_pool_reopen(const char *pool)
|
|
|
|
{
|
2019-09-27 20:46:28 +03:00
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
2019-09-27 20:46:28 +03:00
|
|
|
fnvlist_add_boolean_value(optional, "scrub_restart", B_FALSE);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
2019-09-27 20:46:28 +03:00
|
|
|
IOC_INPUT_TEST(ZFS_IOC_POOL_REOPEN, pool, NULL, optional, 0);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
2019-09-27 20:46:28 +03:00
|
|
|
nvlist_free(optional);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_pool_checkpoint(const char *pool)
|
|
|
|
{
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_POOL_CHECKPOINT, pool, NULL, NULL, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_pool_discard_checkpoint(const char *pool)
|
|
|
|
{
|
|
|
|
int err = lzc_pool_checkpoint(pool);
|
|
|
|
if (err == 0 || err == ZFS_ERR_CHECKPOINT_EXISTS)
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_POOL_DISCARD_CHECKPOINT, pool, NULL,
|
|
|
|
NULL, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_log_history(const char *pool)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_string(required, "message", "input check");
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_LOG_HISTORY, pool, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_create(const char *pool)
|
|
|
|
{
|
|
|
|
char dataset[MAXNAMELEN + 32];
|
|
|
|
|
|
|
|
(void) snprintf(dataset, sizeof (dataset), "%s/create-fs", pool);
|
|
|
|
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
nvlist_t *props = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_int32(required, "type", DMU_OST_ZFS);
|
|
|
|
fnvlist_add_uint64(props, "recordsize", 8192);
|
|
|
|
fnvlist_add_nvlist(optional, "props", props);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_CREATE, dataset, required, optional, 0);
|
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
nvlist_free(optional);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_snapshot(const char *pool, const char *snapshot)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
nvlist_t *snaps = fnvlist_alloc();
|
|
|
|
nvlist_t *props = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_boolean(snaps, snapshot);
|
|
|
|
fnvlist_add_nvlist(required, "snaps", snaps);
|
|
|
|
|
|
|
|
fnvlist_add_string(props, "org.openzfs:launch", "September 17th, 2013");
|
|
|
|
fnvlist_add_nvlist(optional, "props", props);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_SNAPSHOT, pool, required, optional, 0);
|
|
|
|
|
|
|
|
nvlist_free(props);
|
|
|
|
nvlist_free(snaps);
|
|
|
|
nvlist_free(optional);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_space_snaps(const char *snapshot)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
fnvlist_add_string(required, "firstsnap", snapshot);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_SPACE_SNAPS, snapshot, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_destroy_snaps(const char *pool, const char *snapshot)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *snaps = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_boolean(snaps, snapshot);
|
|
|
|
fnvlist_add_nvlist(required, "snaps", snaps);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_DESTROY_SNAPS, pool, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(snaps);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_bookmark(const char *pool, const char *snapshot, const char *bookmark)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_string(required, bookmark, snapshot);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST_WILD(ZFS_IOC_BOOKMARK, pool, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_get_bookmarks(const char *dataset)
|
|
|
|
{
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_boolean(optional, "guid");
|
|
|
|
fnvlist_add_boolean(optional, "createtxg");
|
|
|
|
fnvlist_add_boolean(optional, "creation");
|
|
|
|
|
|
|
|
IOC_INPUT_TEST_WILD(ZFS_IOC_GET_BOOKMARKS, dataset, NULL, optional, 0);
|
|
|
|
|
|
|
|
nvlist_free(optional);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_destroy_bookmarks(const char *pool, const char *bookmark)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_boolean(required, bookmark);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST_WILD(ZFS_IOC_DESTROY_BOOKMARKS, pool, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_clone(const char *snapshot, const char *clone)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
nvlist_t *props = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_string(required, "origin", snapshot);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_CLONE, clone, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(props);
|
|
|
|
nvlist_free(optional);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_rollback(const char *dataset, const char *snapshot)
|
|
|
|
{
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_string(optional, "target", snapshot);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_ROLLBACK, dataset, NULL, optional, B_FALSE);
|
|
|
|
|
|
|
|
nvlist_free(optional);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_hold(const char *pool, const char *snapshot)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
nvlist_t *holds = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_string(holds, snapshot, "libzfs_check_hold");
|
|
|
|
fnvlist_add_nvlist(required, "holds", holds);
|
|
|
|
fnvlist_add_int32(optional, "cleanup_fd", zfs_fd);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_HOLD, pool, required, optional, 0);
|
|
|
|
|
|
|
|
nvlist_free(holds);
|
|
|
|
nvlist_free(optional);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_get_holds(const char *snapshot)
|
|
|
|
{
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_GET_HOLDS, snapshot, NULL, NULL, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_release(const char *pool, const char *snapshot)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *release = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_boolean(release, "libzfs_check_hold");
|
|
|
|
fnvlist_add_nvlist(required, snapshot, release);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST_WILD(ZFS_IOC_RELEASE, pool, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(release);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_send_new(const char *snapshot, int fd)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_int32(required, "fd", fd);
|
|
|
|
|
|
|
|
fnvlist_add_boolean(optional, "largeblockok");
|
|
|
|
fnvlist_add_boolean(optional, "embedok");
|
|
|
|
fnvlist_add_boolean(optional, "compressok");
|
|
|
|
fnvlist_add_boolean(optional, "rawok");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO - Resumable send is harder to set up. So we currently
|
|
|
|
* ignore testing for that variant.
|
|
|
|
*/
|
|
|
|
#if 0
|
|
|
|
fnvlist_add_string(optional, "fromsnap", from);
|
|
|
|
fnvlist_add_uint64(optional, "resume_object", resumeobj);
|
|
|
|
fnvlist_add_uint64(optional, "resume_offset", offset);
|
2020-01-10 21:16:58 +03:00
|
|
|
fnvlist_add_boolean(optional, "savedok");
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
#endif
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_SEND_NEW, snapshot, required, optional, 0);
|
|
|
|
|
|
|
|
nvlist_free(optional);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_recv_new(const char *dataset, int fd)
|
|
|
|
{
|
|
|
|
dmu_replay_record_t drr = { 0 };
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
nvlist_t *props = fnvlist_alloc();
|
|
|
|
char snapshot[MAXNAMELEN + 32];
|
|
|
|
ssize_t count;
|
|
|
|
|
|
|
|
int cleanup_fd = open(ZFS_DEV, O_RDWR);
|
2022-09-29 18:56:42 +03:00
|
|
|
if (cleanup_fd == -1) {
|
|
|
|
(void) fprintf(stderr, "open(%s) failed: %s\n", ZFS_DEV,
|
|
|
|
strerror(errno));
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
(void) snprintf(snapshot, sizeof (snapshot), "%s@replicant", dataset);
|
|
|
|
|
|
|
|
count = pread(fd, &drr, sizeof (drr), 0);
|
|
|
|
if (count != sizeof (drr)) {
|
|
|
|
(void) fprintf(stderr, "could not read stream: %s\n",
|
|
|
|
strerror(errno));
|
|
|
|
}
|
|
|
|
|
|
|
|
fnvlist_add_string(required, "snapname", snapshot);
|
|
|
|
fnvlist_add_byte_array(required, "begin_record", (uchar_t *)&drr,
|
|
|
|
sizeof (drr));
|
|
|
|
fnvlist_add_int32(required, "input_fd", fd);
|
|
|
|
|
|
|
|
fnvlist_add_string(props, "org.openzfs:launch", "September 17th, 2013");
|
|
|
|
fnvlist_add_nvlist(optional, "localprops", props);
|
|
|
|
fnvlist_add_boolean(optional, "force");
|
2022-07-29 01:52:46 +03:00
|
|
|
fnvlist_add_boolean(optional, "heal");
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
fnvlist_add_int32(optional, "cleanup_fd", cleanup_fd);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO - Resumable receive is harder to set up. So we currently
|
|
|
|
* ignore testing for one.
|
|
|
|
*/
|
|
|
|
#if 0
|
|
|
|
fnvlist_add_nvlist(optional, "props", recvdprops);
|
|
|
|
fnvlist_add_string(optional, "origin", origin);
|
|
|
|
fnvlist_add_boolean(optional, "resumable");
|
|
|
|
fnvlist_add_uint64(optional, "action_handle", *action_handle);
|
|
|
|
#endif
|
2020-03-18 01:42:27 +03:00
|
|
|
IOC_INPUT_TEST(ZFS_IOC_RECV_NEW, dataset, required, optional,
|
2023-03-10 20:52:44 +03:00
|
|
|
ENOTSUP);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
|
|
|
nvlist_free(props);
|
|
|
|
nvlist_free(optional);
|
|
|
|
nvlist_free(required);
|
|
|
|
|
|
|
|
(void) close(cleanup_fd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_send_space(const char *snapshot1, const char *snapshot2)
|
|
|
|
{
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_string(optional, "from", snapshot1);
|
|
|
|
fnvlist_add_boolean(optional, "largeblockok");
|
|
|
|
fnvlist_add_boolean(optional, "embedok");
|
|
|
|
fnvlist_add_boolean(optional, "compressok");
|
|
|
|
fnvlist_add_boolean(optional, "rawok");
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_SEND_SPACE, snapshot2, NULL, optional, 0);
|
|
|
|
|
|
|
|
nvlist_free(optional);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_remap(const char *dataset)
|
|
|
|
{
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_REMAP, dataset, NULL, NULL, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_channel_program(const char *pool)
|
|
|
|
{
|
|
|
|
const char *program =
|
|
|
|
"arg = ...\n"
|
|
|
|
"argv = arg[\"argv\"]\n"
|
|
|
|
"return argv[1]";
|
2022-04-19 21:38:30 +03:00
|
|
|
const char *const argv[1] = { "Hello World!" };
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
nvlist_t *args = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_string(required, "program", program);
|
2022-04-19 21:38:30 +03:00
|
|
|
fnvlist_add_string_array(args, "argv", argv, 1);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
fnvlist_add_nvlist(required, "arg", args);
|
|
|
|
|
|
|
|
fnvlist_add_boolean_value(optional, "sync", B_TRUE);
|
|
|
|
fnvlist_add_uint64(optional, "instrlimit", 1000 * 1000);
|
|
|
|
fnvlist_add_uint64(optional, "memlimit", 8192 * 1024);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_CHANNEL_PROGRAM, pool, required, optional, 0);
|
|
|
|
|
|
|
|
nvlist_free(args);
|
|
|
|
nvlist_free(optional);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define WRAPPING_KEY_LEN 32
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_load_key(const char *dataset)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
nvlist_t *hidden = fnvlist_alloc();
|
|
|
|
uint8_t keydata[WRAPPING_KEY_LEN] = {0};
|
|
|
|
|
|
|
|
fnvlist_add_uint8_array(hidden, "wkeydata", keydata, sizeof (keydata));
|
|
|
|
fnvlist_add_nvlist(required, "hidden_args", hidden);
|
|
|
|
fnvlist_add_boolean(optional, "noop");
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_LOAD_KEY, dataset, required, optional, EINVAL);
|
|
|
|
nvlist_free(hidden);
|
|
|
|
nvlist_free(optional);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_change_key(const char *dataset)
|
|
|
|
{
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_CHANGE_KEY, dataset, NULL, NULL, EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_unload_key(const char *dataset)
|
|
|
|
{
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_UNLOAD_KEY, dataset, NULL, NULL, EACCES);
|
|
|
|
}
|
|
|
|
|
OpenZFS 9102 - zfs should be able to initialize storage devices
PROBLEM
========
The first access to a block incurs a performance penalty on some platforms
(e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are
"thick provisioned", where supported by the platform (VMware). This can
create a large delay in getting a new virtual machines up and running (or
adding storage to an existing Engine). If the thick provision step is
omitted, write performance will be suboptimal until all blocks on the LUN
have been written.
SOLUTION
=========
This feature introduces a way to 'initialize' the disks at install or in the
background to make sure we don't incur this first read penalty.
When an entire LUN is added to ZFS, we make all space available immediately,
and allow ZFS to find unallocated space and zero it out. This works with
concurrent writes to arbitrary offsets, ensuring that we don't zero out
something that has been (or is in the middle of being) written. This scheme
can also be applied to existing pools (affecting only free regions on the
vdev). Detailed design:
- new subcommand:zpool initialize [-cs] <pool> [<vdev> ...]
- start, suspend, or cancel initialization
- Creates new open-context thread for each vdev
- Thread iterates through all metaslabs in this vdev
- Each metaslab:
- select a metaslab
- load the metaslab
- mark the metaslab as being zeroed
- walk all free ranges within that metaslab and translate
them to ranges on the leaf vdev
- issue a "zeroing" I/O on the leaf vdev that corresponds to
a free range on the metaslab we're working on
- continue until all free ranges for this metaslab have been
"zeroed"
- reset/unmark the metaslab being zeroed
- if more metaslabs exist, then repeat above tasks.
- if no more metaslabs, then we're done.
- progress for the initialization is stored on-disk in the vdev’s
leaf zap object. The following information is stored:
- the last offset that has been initialized
- the state of the initialization process (i.e. active,
suspended, or canceled)
- the start time for the initialization
- progress is reported via the zpool status command and shows
information for each of the vdevs that are initializing
Porting notes:
- Added zfs_initialize_value module parameter to set the pattern
written by "zpool initialize".
- Added zfs_vdev_{initializing,removal}_{min,max}_active module options.
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Signed-off-by: Tim Chase <tim@chase2k.com>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/9102
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb
Closes #8230
2018-12-19 17:54:59 +03:00
|
|
|
static void
|
|
|
|
test_vdev_initialize(const char *pool)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *vdev_guids = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_uint64(vdev_guids, "path", 0xdeadbeefdeadbeef);
|
|
|
|
fnvlist_add_uint64(required, ZPOOL_INITIALIZE_COMMAND,
|
2019-03-29 19:13:20 +03:00
|
|
|
POOL_INITIALIZE_START);
|
OpenZFS 9102 - zfs should be able to initialize storage devices
PROBLEM
========
The first access to a block incurs a performance penalty on some platforms
(e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are
"thick provisioned", where supported by the platform (VMware). This can
create a large delay in getting a new virtual machines up and running (or
adding storage to an existing Engine). If the thick provision step is
omitted, write performance will be suboptimal until all blocks on the LUN
have been written.
SOLUTION
=========
This feature introduces a way to 'initialize' the disks at install or in the
background to make sure we don't incur this first read penalty.
When an entire LUN is added to ZFS, we make all space available immediately,
and allow ZFS to find unallocated space and zero it out. This works with
concurrent writes to arbitrary offsets, ensuring that we don't zero out
something that has been (or is in the middle of being) written. This scheme
can also be applied to existing pools (affecting only free regions on the
vdev). Detailed design:
- new subcommand:zpool initialize [-cs] <pool> [<vdev> ...]
- start, suspend, or cancel initialization
- Creates new open-context thread for each vdev
- Thread iterates through all metaslabs in this vdev
- Each metaslab:
- select a metaslab
- load the metaslab
- mark the metaslab as being zeroed
- walk all free ranges within that metaslab and translate
them to ranges on the leaf vdev
- issue a "zeroing" I/O on the leaf vdev that corresponds to
a free range on the metaslab we're working on
- continue until all free ranges for this metaslab have been
"zeroed"
- reset/unmark the metaslab being zeroed
- if more metaslabs exist, then repeat above tasks.
- if no more metaslabs, then we're done.
- progress for the initialization is stored on-disk in the vdev’s
leaf zap object. The following information is stored:
- the last offset that has been initialized
- the state of the initialization process (i.e. active,
suspended, or canceled)
- the start time for the initialization
- progress is reported via the zpool status command and shows
information for each of the vdevs that are initializing
Porting notes:
- Added zfs_initialize_value module parameter to set the pattern
written by "zpool initialize".
- Added zfs_vdev_{initializing,removal}_{min,max}_active module options.
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Signed-off-by: Tim Chase <tim@chase2k.com>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/9102
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb
Closes #8230
2018-12-19 17:54:59 +03:00
|
|
|
fnvlist_add_nvlist(required, ZPOOL_INITIALIZE_VDEVS, vdev_guids);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_POOL_INITIALIZE, pool, required, NULL, EINVAL);
|
|
|
|
nvlist_free(vdev_guids);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
2019-03-29 19:13:20 +03:00
|
|
|
static void
|
|
|
|
test_vdev_trim(const char *pool)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
nvlist_t *vdev_guids = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_uint64(vdev_guids, "path", 0xdeadbeefdeadbeef);
|
|
|
|
fnvlist_add_uint64(required, ZPOOL_TRIM_COMMAND, POOL_TRIM_START);
|
|
|
|
fnvlist_add_nvlist(required, ZPOOL_TRIM_VDEVS, vdev_guids);
|
|
|
|
fnvlist_add_uint64(optional, ZPOOL_TRIM_RATE, 1ULL << 30);
|
|
|
|
fnvlist_add_boolean_value(optional, ZPOOL_TRIM_SECURE, B_TRUE);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_POOL_TRIM, pool, required, optional, EINVAL);
|
|
|
|
nvlist_free(vdev_guids);
|
|
|
|
nvlist_free(optional);
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
static int
|
|
|
|
zfs_destroy(const char *dataset)
|
|
|
|
{
|
|
|
|
zfs_cmd_t zc = {"\0"};
|
|
|
|
int err;
|
|
|
|
|
2018-11-20 21:37:49 +03:00
|
|
|
(void) strlcpy(zc.zc_name, dataset, sizeof (zc.zc_name));
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
zc.zc_name[sizeof (zc.zc_name) - 1] = '\0';
|
2021-10-07 20:31:26 +03:00
|
|
|
err = lzc_ioctl_fd(zfs_fd, ZFS_IOC_DESTROY, &zc);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
|
|
|
|
return (err == 0 ? 0 : errno);
|
|
|
|
}
|
|
|
|
|
Implement Redacted Send/Receive
Redacted send/receive allows users to send subsets of their data to
a target system. One possible use case for this feature is to not
transmit sensitive information to a data warehousing, test/dev, or
analytics environment. Another is to save space by not replicating
unimportant data within a given dataset, for example in backup tools
like zrepl.
Redacted send/receive is a three-stage process. First, a clone (or
clones) is made of the snapshot to be sent to the target. In this
clone (or clones), all unnecessary or unwanted data is removed or
modified. This clone is then snapshotted to create the "redaction
snapshot" (or snapshots). Second, the new zfs redact command is used
to create a redaction bookmark. The redaction bookmark stores the
list of blocks in a snapshot that were modified by the redaction
snapshot(s). Finally, the redaction bookmark is passed as a parameter
to zfs send. When sending to the snapshot that was redacted, the
redaction bookmark is used to filter out blocks that contain sensitive
or unwanted information, and those blocks are not included in the send
stream. When sending from the redaction bookmark, the blocks it
contains are considered as candidate blocks in addition to those
blocks in the destination snapshot that were modified since the
creation_txg of the redaction bookmark. This step is necessary to
allow the target to rehydrate data in the case where some blocks are
accidentally or unnecessarily modified in the redaction snapshot.
The changes to bookmarks to enable fast space estimation involve
adding deadlists to bookmarks. There is also logic to manage the
life cycles of these deadlists.
The new size estimation process operates in cases where previously
an accurate estimate could not be provided. In those cases, a send
is performed where no data blocks are read, reducing the runtime
significantly and providing a byte-accurate size estimate.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #7958
2019-06-19 19:48:13 +03:00
|
|
|
static void
|
|
|
|
test_redact(const char *snapshot1, const char *snapshot2)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *snapnv = fnvlist_alloc();
|
|
|
|
char bookmark[MAXNAMELEN + 32];
|
|
|
|
|
|
|
|
fnvlist_add_string(required, "bookname", "testbookmark");
|
|
|
|
fnvlist_add_boolean(snapnv, snapshot2);
|
|
|
|
fnvlist_add_nvlist(required, "snapnv", snapnv);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_REDACT, snapshot1, required, NULL, 0);
|
|
|
|
|
|
|
|
nvlist_free(snapnv);
|
|
|
|
nvlist_free(required);
|
|
|
|
|
2019-06-23 02:30:59 +03:00
|
|
|
strlcpy(bookmark, snapshot1, sizeof (bookmark));
|
Implement Redacted Send/Receive
Redacted send/receive allows users to send subsets of their data to
a target system. One possible use case for this feature is to not
transmit sensitive information to a data warehousing, test/dev, or
analytics environment. Another is to save space by not replicating
unimportant data within a given dataset, for example in backup tools
like zrepl.
Redacted send/receive is a three-stage process. First, a clone (or
clones) is made of the snapshot to be sent to the target. In this
clone (or clones), all unnecessary or unwanted data is removed or
modified. This clone is then snapshotted to create the "redaction
snapshot" (or snapshots). Second, the new zfs redact command is used
to create a redaction bookmark. The redaction bookmark stores the
list of blocks in a snapshot that were modified by the redaction
snapshot(s). Finally, the redaction bookmark is passed as a parameter
to zfs send. When sending to the snapshot that was redacted, the
redaction bookmark is used to filter out blocks that contain sensitive
or unwanted information, and those blocks are not included in the send
stream. When sending from the redaction bookmark, the blocks it
contains are considered as candidate blocks in addition to those
blocks in the destination snapshot that were modified since the
creation_txg of the redaction bookmark. This step is necessary to
allow the target to rehydrate data in the case where some blocks are
accidentally or unnecessarily modified in the redaction snapshot.
The changes to bookmarks to enable fast space estimation involve
adding deadlists to bookmarks. There is also logic to manage the
life cycles of these deadlists.
The new size estimation process operates in cases where previously
an accurate estimate could not be provided. In those cases, a send
is performed where no data blocks are read, reducing the runtime
significantly and providing a byte-accurate size estimate.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #7958
2019-06-19 19:48:13 +03:00
|
|
|
*strchr(bookmark, '@') = '\0';
|
2019-06-23 02:30:59 +03:00
|
|
|
strlcat(bookmark, "#testbookmark", sizeof (bookmark) -
|
|
|
|
strlen(bookmark));
|
Implement Redacted Send/Receive
Redacted send/receive allows users to send subsets of their data to
a target system. One possible use case for this feature is to not
transmit sensitive information to a data warehousing, test/dev, or
analytics environment. Another is to save space by not replicating
unimportant data within a given dataset, for example in backup tools
like zrepl.
Redacted send/receive is a three-stage process. First, a clone (or
clones) is made of the snapshot to be sent to the target. In this
clone (or clones), all unnecessary or unwanted data is removed or
modified. This clone is then snapshotted to create the "redaction
snapshot" (or snapshots). Second, the new zfs redact command is used
to create a redaction bookmark. The redaction bookmark stores the
list of blocks in a snapshot that were modified by the redaction
snapshot(s). Finally, the redaction bookmark is passed as a parameter
to zfs send. When sending to the snapshot that was redacted, the
redaction bookmark is used to filter out blocks that contain sensitive
or unwanted information, and those blocks are not included in the send
stream. When sending from the redaction bookmark, the blocks it
contains are considered as candidate blocks in addition to those
blocks in the destination snapshot that were modified since the
creation_txg of the redaction bookmark. This step is necessary to
allow the target to rehydrate data in the case where some blocks are
accidentally or unnecessarily modified in the redaction snapshot.
The changes to bookmarks to enable fast space estimation involve
adding deadlists to bookmarks. There is also logic to manage the
life cycles of these deadlists.
The new size estimation process operates in cases where previously
an accurate estimate could not be provided. In those cases, a send
is performed where no data blocks are read, reducing the runtime
significantly and providing a byte-accurate size estimate.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #7958
2019-06-19 19:48:13 +03:00
|
|
|
zfs_destroy(bookmark);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_get_bookmark_props(const char *bookmark)
|
|
|
|
{
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_GET_BOOKMARK_PROPS, bookmark, NULL, NULL, 0);
|
|
|
|
}
|
|
|
|
|
Add subcommand to wait for background zfs activity to complete
Currently the best way to wait for the completion of a long-running
operation in a pool, like a scrub or device removal, is to poll 'zpool
status' and parse its output, which is neither efficient nor convenient.
This change adds a 'wait' subcommand to the zpool command. When invoked,
'zpool wait' will block until a specified type of background activity
completes. Currently, this subcommand can wait for any of the following:
- Scrubs or resilvers to complete
- Devices to initialized
- Devices to be replaced
- Devices to be removed
- Checkpoints to be discarded
- Background freeing to complete
For example, a scrub that is in progress could be waited for by running
zpool wait -t scrub <pool>
This also adds a -w flag to the attach, checkpoint, initialize, replace,
remove, and scrub subcommands. When used, this flag makes the operations
kicked off by these subcommands synchronous instead of asynchronous.
This functionality is implemented using a new ioctl. The type of
activity to wait for is provided as input to the ioctl, and the ioctl
blocks until all activity of that type has completed. An ioctl was used
over other methods of kernel-userspace communiction primarily for the
sake of portability.
Porting Notes:
This is ported from Delphix OS change DLPX-44432. The following changes
were made while porting:
- Added ZoL-style ioctl input declaration.
- Reorganized error handling in zpool_initialize in libzfs to integrate
better with changes made for TRIM support.
- Fixed check for whether a checkpoint discard is in progress.
Previously it also waited if the pool had a checkpoint, instead of
just if a checkpoint was being discarded.
- Exposed zfs_initialize_chunk_size as a ZoL-style tunable.
- Updated more existing tests to make use of new 'zpool wait'
functionality, tests that don't exist in Delphix OS.
- Used existing ZoL tunable zfs_scan_suspend_progress, together with
zinject, in place of a new tunable zfs_scan_max_blks_per_txg.
- Added support for a non-integral interval argument to zpool wait.
Future work:
ZoL has support for trimming devices, which Delphix OS does not. In the
future, 'zpool wait' could be extended to add the ability to wait for
trim operations to complete.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes #9162
2019-09-14 04:09:06 +03:00
|
|
|
static void
|
|
|
|
test_wait(const char *pool)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
nvlist_t *optional = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_int32(required, "wait_activity", 2);
|
|
|
|
fnvlist_add_uint64(optional, "wait_tag", 0xdeadbeefdeadbeef);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_WAIT, pool, required, optional, EINVAL);
|
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
nvlist_free(optional);
|
|
|
|
}
|
|
|
|
|
2020-04-01 20:02:06 +03:00
|
|
|
static void
|
|
|
|
test_wait_fs(const char *dataset)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
|
|
|
|
fnvlist_add_int32(required, "wait_activity", 2);
|
|
|
|
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_WAIT_FS, dataset, required, NULL, EINVAL);
|
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
2020-05-07 19:36:33 +03:00
|
|
|
static void
|
|
|
|
test_get_bootenv(const char *pool)
|
|
|
|
{
|
|
|
|
IOC_INPUT_TEST(ZFS_IOC_GET_BOOTENV, pool, NULL, NULL, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
test_set_bootenv(const char *pool)
|
|
|
|
{
|
|
|
|
nvlist_t *required = fnvlist_alloc();
|
|
|
|
|
2020-09-16 01:42:27 +03:00
|
|
|
fnvlist_add_uint64(required, "version", VB_RAW);
|
|
|
|
fnvlist_add_string(required, GRUB_ENVMAP, "test");
|
2020-05-07 19:36:33 +03:00
|
|
|
|
2020-09-16 01:42:27 +03:00
|
|
|
IOC_INPUT_TEST_WILD(ZFS_IOC_SET_BOOTENV, pool, required, NULL, 0);
|
2020-05-07 19:36:33 +03:00
|
|
|
|
|
|
|
nvlist_free(required);
|
|
|
|
}
|
|
|
|
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
static void
|
|
|
|
zfs_ioc_input_tests(const char *pool)
|
|
|
|
{
|
|
|
|
char filepath[] = "/tmp/ioc_test_file_XXXXXX";
|
|
|
|
char dataset[ZFS_MAX_DATASET_NAME_LEN];
|
|
|
|
char snapbase[ZFS_MAX_DATASET_NAME_LEN + 32];
|
|
|
|
char snapshot[ZFS_MAX_DATASET_NAME_LEN + 32];
|
|
|
|
char bookmark[ZFS_MAX_DATASET_NAME_LEN + 32];
|
|
|
|
char backup[ZFS_MAX_DATASET_NAME_LEN];
|
|
|
|
char clone[ZFS_MAX_DATASET_NAME_LEN];
|
Implement Redacted Send/Receive
Redacted send/receive allows users to send subsets of their data to
a target system. One possible use case for this feature is to not
transmit sensitive information to a data warehousing, test/dev, or
analytics environment. Another is to save space by not replicating
unimportant data within a given dataset, for example in backup tools
like zrepl.
Redacted send/receive is a three-stage process. First, a clone (or
clones) is made of the snapshot to be sent to the target. In this
clone (or clones), all unnecessary or unwanted data is removed or
modified. This clone is then snapshotted to create the "redaction
snapshot" (or snapshots). Second, the new zfs redact command is used
to create a redaction bookmark. The redaction bookmark stores the
list of blocks in a snapshot that were modified by the redaction
snapshot(s). Finally, the redaction bookmark is passed as a parameter
to zfs send. When sending to the snapshot that was redacted, the
redaction bookmark is used to filter out blocks that contain sensitive
or unwanted information, and those blocks are not included in the send
stream. When sending from the redaction bookmark, the blocks it
contains are considered as candidate blocks in addition to those
blocks in the destination snapshot that were modified since the
creation_txg of the redaction bookmark. This step is necessary to
allow the target to rehydrate data in the case where some blocks are
accidentally or unnecessarily modified in the redaction snapshot.
The changes to bookmarks to enable fast space estimation involve
adding deadlists to bookmarks. There is also logic to manage the
life cycles of these deadlists.
The new size estimation process operates in cases where previously
an accurate estimate could not be provided. In those cases, a send
is performed where no data blocks are read, reducing the runtime
significantly and providing a byte-accurate size estimate.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #7958
2019-06-19 19:48:13 +03:00
|
|
|
char clonesnap[ZFS_MAX_DATASET_NAME_LEN + 32];
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
int tmpfd, err;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Setup names and create a working dataset
|
|
|
|
*/
|
|
|
|
(void) snprintf(dataset, sizeof (dataset), "%s/test-fs", pool);
|
|
|
|
(void) snprintf(snapbase, sizeof (snapbase), "%s@snapbase", dataset);
|
|
|
|
(void) snprintf(snapshot, sizeof (snapshot), "%s@snapshot", dataset);
|
|
|
|
(void) snprintf(bookmark, sizeof (bookmark), "%s#bookmark", dataset);
|
|
|
|
(void) snprintf(clone, sizeof (clone), "%s/test-fs-clone", pool);
|
Implement Redacted Send/Receive
Redacted send/receive allows users to send subsets of their data to
a target system. One possible use case for this feature is to not
transmit sensitive information to a data warehousing, test/dev, or
analytics environment. Another is to save space by not replicating
unimportant data within a given dataset, for example in backup tools
like zrepl.
Redacted send/receive is a three-stage process. First, a clone (or
clones) is made of the snapshot to be sent to the target. In this
clone (or clones), all unnecessary or unwanted data is removed or
modified. This clone is then snapshotted to create the "redaction
snapshot" (or snapshots). Second, the new zfs redact command is used
to create a redaction bookmark. The redaction bookmark stores the
list of blocks in a snapshot that were modified by the redaction
snapshot(s). Finally, the redaction bookmark is passed as a parameter
to zfs send. When sending to the snapshot that was redacted, the
redaction bookmark is used to filter out blocks that contain sensitive
or unwanted information, and those blocks are not included in the send
stream. When sending from the redaction bookmark, the blocks it
contains are considered as candidate blocks in addition to those
blocks in the destination snapshot that were modified since the
creation_txg of the redaction bookmark. This step is necessary to
allow the target to rehydrate data in the case where some blocks are
accidentally or unnecessarily modified in the redaction snapshot.
The changes to bookmarks to enable fast space estimation involve
adding deadlists to bookmarks. There is also logic to manage the
life cycles of these deadlists.
The new size estimation process operates in cases where previously
an accurate estimate could not be provided. In those cases, a send
is performed where no data blocks are read, reducing the runtime
significantly and providing a byte-accurate size estimate.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #7958
2019-06-19 19:48:13 +03:00
|
|
|
(void) snprintf(clonesnap, sizeof (clonesnap), "%s@snap", clone);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
(void) snprintf(backup, sizeof (backup), "%s/backup", pool);
|
|
|
|
|
2020-12-28 03:31:02 +03:00
|
|
|
err = lzc_create(dataset, LZC_DATSET_TYPE_ZFS, NULL, NULL, -1);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
if (err) {
|
|
|
|
(void) fprintf(stderr, "could not create '%s': %s\n",
|
|
|
|
dataset, strerror(errno));
|
|
|
|
exit(2);
|
|
|
|
}
|
|
|
|
|
|
|
|
tmpfd = mkstemp(filepath);
|
|
|
|
if (tmpfd < 0) {
|
|
|
|
(void) fprintf(stderr, "could not create '%s': %s\n",
|
|
|
|
filepath, strerror(errno));
|
|
|
|
exit(2);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* run a test for each ioctl
|
|
|
|
* Note that some test build on previous test operations
|
|
|
|
*/
|
|
|
|
test_pool_sync(pool);
|
|
|
|
test_pool_reopen(pool);
|
|
|
|
test_pool_checkpoint(pool);
|
|
|
|
test_pool_discard_checkpoint(pool);
|
|
|
|
test_log_history(pool);
|
|
|
|
|
|
|
|
test_create(dataset);
|
|
|
|
test_snapshot(pool, snapbase);
|
|
|
|
test_snapshot(pool, snapshot);
|
|
|
|
|
|
|
|
test_space_snaps(snapshot);
|
|
|
|
test_send_space(snapbase, snapshot);
|
|
|
|
test_send_new(snapshot, tmpfd);
|
|
|
|
test_recv_new(backup, tmpfd);
|
|
|
|
|
|
|
|
test_bookmark(pool, snapshot, bookmark);
|
|
|
|
test_get_bookmarks(dataset);
|
Implement Redacted Send/Receive
Redacted send/receive allows users to send subsets of their data to
a target system. One possible use case for this feature is to not
transmit sensitive information to a data warehousing, test/dev, or
analytics environment. Another is to save space by not replicating
unimportant data within a given dataset, for example in backup tools
like zrepl.
Redacted send/receive is a three-stage process. First, a clone (or
clones) is made of the snapshot to be sent to the target. In this
clone (or clones), all unnecessary or unwanted data is removed or
modified. This clone is then snapshotted to create the "redaction
snapshot" (or snapshots). Second, the new zfs redact command is used
to create a redaction bookmark. The redaction bookmark stores the
list of blocks in a snapshot that were modified by the redaction
snapshot(s). Finally, the redaction bookmark is passed as a parameter
to zfs send. When sending to the snapshot that was redacted, the
redaction bookmark is used to filter out blocks that contain sensitive
or unwanted information, and those blocks are not included in the send
stream. When sending from the redaction bookmark, the blocks it
contains are considered as candidate blocks in addition to those
blocks in the destination snapshot that were modified since the
creation_txg of the redaction bookmark. This step is necessary to
allow the target to rehydrate data in the case where some blocks are
accidentally or unnecessarily modified in the redaction snapshot.
The changes to bookmarks to enable fast space estimation involve
adding deadlists to bookmarks. There is also logic to manage the
life cycles of these deadlists.
The new size estimation process operates in cases where previously
an accurate estimate could not be provided. In those cases, a send
is performed where no data blocks are read, reducing the runtime
significantly and providing a byte-accurate size estimate.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #7958
2019-06-19 19:48:13 +03:00
|
|
|
test_get_bookmark_props(bookmark);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
test_destroy_bookmarks(pool, bookmark);
|
|
|
|
|
|
|
|
test_hold(pool, snapshot);
|
|
|
|
test_get_holds(snapshot);
|
|
|
|
test_release(pool, snapshot);
|
|
|
|
|
|
|
|
test_clone(snapshot, clone);
|
Implement Redacted Send/Receive
Redacted send/receive allows users to send subsets of their data to
a target system. One possible use case for this feature is to not
transmit sensitive information to a data warehousing, test/dev, or
analytics environment. Another is to save space by not replicating
unimportant data within a given dataset, for example in backup tools
like zrepl.
Redacted send/receive is a three-stage process. First, a clone (or
clones) is made of the snapshot to be sent to the target. In this
clone (or clones), all unnecessary or unwanted data is removed or
modified. This clone is then snapshotted to create the "redaction
snapshot" (or snapshots). Second, the new zfs redact command is used
to create a redaction bookmark. The redaction bookmark stores the
list of blocks in a snapshot that were modified by the redaction
snapshot(s). Finally, the redaction bookmark is passed as a parameter
to zfs send. When sending to the snapshot that was redacted, the
redaction bookmark is used to filter out blocks that contain sensitive
or unwanted information, and those blocks are not included in the send
stream. When sending from the redaction bookmark, the blocks it
contains are considered as candidate blocks in addition to those
blocks in the destination snapshot that were modified since the
creation_txg of the redaction bookmark. This step is necessary to
allow the target to rehydrate data in the case where some blocks are
accidentally or unnecessarily modified in the redaction snapshot.
The changes to bookmarks to enable fast space estimation involve
adding deadlists to bookmarks. There is also logic to manage the
life cycles of these deadlists.
The new size estimation process operates in cases where previously
an accurate estimate could not be provided. In those cases, a send
is performed where no data blocks are read, reducing the runtime
significantly and providing a byte-accurate size estimate.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com>
Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #7958
2019-06-19 19:48:13 +03:00
|
|
|
test_snapshot(pool, clonesnap);
|
|
|
|
test_redact(snapshot, clonesnap);
|
|
|
|
zfs_destroy(clonesnap);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
zfs_destroy(clone);
|
|
|
|
|
|
|
|
test_rollback(dataset, snapshot);
|
|
|
|
test_destroy_snaps(pool, snapshot);
|
|
|
|
test_destroy_snaps(pool, snapbase);
|
|
|
|
|
|
|
|
test_remap(dataset);
|
|
|
|
test_channel_program(pool);
|
|
|
|
|
|
|
|
test_load_key(dataset);
|
|
|
|
test_change_key(dataset);
|
|
|
|
test_unload_key(dataset);
|
|
|
|
|
OpenZFS 9102 - zfs should be able to initialize storage devices
PROBLEM
========
The first access to a block incurs a performance penalty on some platforms
(e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are
"thick provisioned", where supported by the platform (VMware). This can
create a large delay in getting a new virtual machines up and running (or
adding storage to an existing Engine). If the thick provision step is
omitted, write performance will be suboptimal until all blocks on the LUN
have been written.
SOLUTION
=========
This feature introduces a way to 'initialize' the disks at install or in the
background to make sure we don't incur this first read penalty.
When an entire LUN is added to ZFS, we make all space available immediately,
and allow ZFS to find unallocated space and zero it out. This works with
concurrent writes to arbitrary offsets, ensuring that we don't zero out
something that has been (or is in the middle of being) written. This scheme
can also be applied to existing pools (affecting only free regions on the
vdev). Detailed design:
- new subcommand:zpool initialize [-cs] <pool> [<vdev> ...]
- start, suspend, or cancel initialization
- Creates new open-context thread for each vdev
- Thread iterates through all metaslabs in this vdev
- Each metaslab:
- select a metaslab
- load the metaslab
- mark the metaslab as being zeroed
- walk all free ranges within that metaslab and translate
them to ranges on the leaf vdev
- issue a "zeroing" I/O on the leaf vdev that corresponds to
a free range on the metaslab we're working on
- continue until all free ranges for this metaslab have been
"zeroed"
- reset/unmark the metaslab being zeroed
- if more metaslabs exist, then repeat above tasks.
- if no more metaslabs, then we're done.
- progress for the initialization is stored on-disk in the vdev’s
leaf zap object. The following information is stored:
- the last offset that has been initialized
- the state of the initialization process (i.e. active,
suspended, or canceled)
- the start time for the initialization
- progress is reported via the zpool status command and shows
information for each of the vdevs that are initializing
Porting notes:
- Added zfs_initialize_value module parameter to set the pattern
written by "zpool initialize".
- Added zfs_vdev_{initializing,removal}_{min,max}_active module options.
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Signed-off-by: Tim Chase <tim@chase2k.com>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/9102
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb
Closes #8230
2018-12-19 17:54:59 +03:00
|
|
|
test_vdev_initialize(pool);
|
2019-03-29 19:13:20 +03:00
|
|
|
test_vdev_trim(pool);
|
OpenZFS 9102 - zfs should be able to initialize storage devices
PROBLEM
========
The first access to a block incurs a performance penalty on some platforms
(e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are
"thick provisioned", where supported by the platform (VMware). This can
create a large delay in getting a new virtual machines up and running (or
adding storage to an existing Engine). If the thick provision step is
omitted, write performance will be suboptimal until all blocks on the LUN
have been written.
SOLUTION
=========
This feature introduces a way to 'initialize' the disks at install or in the
background to make sure we don't incur this first read penalty.
When an entire LUN is added to ZFS, we make all space available immediately,
and allow ZFS to find unallocated space and zero it out. This works with
concurrent writes to arbitrary offsets, ensuring that we don't zero out
something that has been (or is in the middle of being) written. This scheme
can also be applied to existing pools (affecting only free regions on the
vdev). Detailed design:
- new subcommand:zpool initialize [-cs] <pool> [<vdev> ...]
- start, suspend, or cancel initialization
- Creates new open-context thread for each vdev
- Thread iterates through all metaslabs in this vdev
- Each metaslab:
- select a metaslab
- load the metaslab
- mark the metaslab as being zeroed
- walk all free ranges within that metaslab and translate
them to ranges on the leaf vdev
- issue a "zeroing" I/O on the leaf vdev that corresponds to
a free range on the metaslab we're working on
- continue until all free ranges for this metaslab have been
"zeroed"
- reset/unmark the metaslab being zeroed
- if more metaslabs exist, then repeat above tasks.
- if no more metaslabs, then we're done.
- progress for the initialization is stored on-disk in the vdev’s
leaf zap object. The following information is stored:
- the last offset that has been initialized
- the state of the initialization process (i.e. active,
suspended, or canceled)
- the start time for the initialization
- progress is reported via the zpool status command and shows
information for each of the vdevs that are initializing
Porting notes:
- Added zfs_initialize_value module parameter to set the pattern
written by "zpool initialize".
- Added zfs_vdev_{initializing,removal}_{min,max}_active module options.
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Signed-off-by: Tim Chase <tim@chase2k.com>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/9102
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb
Closes #8230
2018-12-19 17:54:59 +03:00
|
|
|
|
Add subcommand to wait for background zfs activity to complete
Currently the best way to wait for the completion of a long-running
operation in a pool, like a scrub or device removal, is to poll 'zpool
status' and parse its output, which is neither efficient nor convenient.
This change adds a 'wait' subcommand to the zpool command. When invoked,
'zpool wait' will block until a specified type of background activity
completes. Currently, this subcommand can wait for any of the following:
- Scrubs or resilvers to complete
- Devices to initialized
- Devices to be replaced
- Devices to be removed
- Checkpoints to be discarded
- Background freeing to complete
For example, a scrub that is in progress could be waited for by running
zpool wait -t scrub <pool>
This also adds a -w flag to the attach, checkpoint, initialize, replace,
remove, and scrub subcommands. When used, this flag makes the operations
kicked off by these subcommands synchronous instead of asynchronous.
This functionality is implemented using a new ioctl. The type of
activity to wait for is provided as input to the ioctl, and the ioctl
blocks until all activity of that type has completed. An ioctl was used
over other methods of kernel-userspace communiction primarily for the
sake of portability.
Porting Notes:
This is ported from Delphix OS change DLPX-44432. The following changes
were made while porting:
- Added ZoL-style ioctl input declaration.
- Reorganized error handling in zpool_initialize in libzfs to integrate
better with changes made for TRIM support.
- Fixed check for whether a checkpoint discard is in progress.
Previously it also waited if the pool had a checkpoint, instead of
just if a checkpoint was being discarded.
- Exposed zfs_initialize_chunk_size as a ZoL-style tunable.
- Updated more existing tests to make use of new 'zpool wait'
functionality, tests that don't exist in Delphix OS.
- Used existing ZoL tunable zfs_scan_suspend_progress, together with
zinject, in place of a new tunable zfs_scan_max_blks_per_txg.
- Added support for a non-integral interval argument to zpool wait.
Future work:
ZoL has support for trimming devices, which Delphix OS does not. In the
future, 'zpool wait' could be extended to add the ability to wait for
trim operations to complete.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes #9162
2019-09-14 04:09:06 +03:00
|
|
|
test_wait(pool);
|
2020-04-01 20:02:06 +03:00
|
|
|
test_wait_fs(dataset);
|
Add subcommand to wait for background zfs activity to complete
Currently the best way to wait for the completion of a long-running
operation in a pool, like a scrub or device removal, is to poll 'zpool
status' and parse its output, which is neither efficient nor convenient.
This change adds a 'wait' subcommand to the zpool command. When invoked,
'zpool wait' will block until a specified type of background activity
completes. Currently, this subcommand can wait for any of the following:
- Scrubs or resilvers to complete
- Devices to initialized
- Devices to be replaced
- Devices to be removed
- Checkpoints to be discarded
- Background freeing to complete
For example, a scrub that is in progress could be waited for by running
zpool wait -t scrub <pool>
This also adds a -w flag to the attach, checkpoint, initialize, replace,
remove, and scrub subcommands. When used, this flag makes the operations
kicked off by these subcommands synchronous instead of asynchronous.
This functionality is implemented using a new ioctl. The type of
activity to wait for is provided as input to the ioctl, and the ioctl
blocks until all activity of that type has completed. An ioctl was used
over other methods of kernel-userspace communiction primarily for the
sake of portability.
Porting Notes:
This is ported from Delphix OS change DLPX-44432. The following changes
were made while porting:
- Added ZoL-style ioctl input declaration.
- Reorganized error handling in zpool_initialize in libzfs to integrate
better with changes made for TRIM support.
- Fixed check for whether a checkpoint discard is in progress.
Previously it also waited if the pool had a checkpoint, instead of
just if a checkpoint was being discarded.
- Exposed zfs_initialize_chunk_size as a ZoL-style tunable.
- Updated more existing tests to make use of new 'zpool wait'
functionality, tests that don't exist in Delphix OS.
- Used existing ZoL tunable zfs_scan_suspend_progress, together with
zinject, in place of a new tunable zfs_scan_max_blks_per_txg.
- Added support for a non-integral interval argument to zpool wait.
Future work:
ZoL has support for trimming devices, which Delphix OS does not. In the
future, 'zpool wait' could be extended to add the ability to wait for
trim operations to complete.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes #9162
2019-09-14 04:09:06 +03:00
|
|
|
|
2020-05-07 19:36:33 +03:00
|
|
|
test_set_bootenv(pool);
|
|
|
|
test_get_bootenv(pool);
|
|
|
|
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
/*
|
|
|
|
* cleanup
|
|
|
|
*/
|
|
|
|
zfs_cmd_t zc = {"\0"};
|
|
|
|
|
|
|
|
nvlist_t *snaps = fnvlist_alloc();
|
|
|
|
fnvlist_add_boolean(snaps, snapshot);
|
|
|
|
(void) lzc_destroy_snaps(snaps, B_FALSE, NULL);
|
|
|
|
nvlist_free(snaps);
|
|
|
|
|
|
|
|
(void) zfs_destroy(dataset);
|
|
|
|
(void) zfs_destroy(backup);
|
|
|
|
|
|
|
|
(void) close(tmpfd);
|
|
|
|
(void) unlink(filepath);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* All the unused slots should yield ZFS_ERR_IOC_CMD_UNAVAIL
|
|
|
|
*/
|
|
|
|
for (int i = 0; i < ARRAY_SIZE(ioc_skip); i++) {
|
|
|
|
if (ioc_tested[ioc_skip[i] - ZFS_IOC_FIRST])
|
|
|
|
(void) fprintf(stderr, "cmd %d tested, not skipped!\n",
|
|
|
|
(int)(ioc_skip[i] - ZFS_IOC_FIRST));
|
|
|
|
|
|
|
|
ioc_tested[ioc_skip[i] - ZFS_IOC_FIRST] = B_TRUE;
|
|
|
|
}
|
|
|
|
|
2018-11-20 21:37:49 +03:00
|
|
|
(void) strlcpy(zc.zc_name, pool, sizeof (zc.zc_name));
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
zc.zc_name[sizeof (zc.zc_name) - 1] = '\0';
|
|
|
|
|
|
|
|
for (unsigned ioc = ZFS_IOC_FIRST; ioc < ZFS_IOC_LAST; ioc++) {
|
|
|
|
unsigned cmd = ioc - ZFS_IOC_FIRST;
|
|
|
|
|
|
|
|
if (ioc_tested[cmd])
|
|
|
|
continue;
|
|
|
|
|
2021-10-07 20:31:26 +03:00
|
|
|
if (lzc_ioctl_fd(zfs_fd, ioc, &zc) != 0 &&
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
errno != ZFS_ERR_IOC_CMD_UNAVAIL) {
|
|
|
|
(void) fprintf(stderr, "cmd %d is missing a test case "
|
|
|
|
"(%d)\n", cmd, errno);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
enum zfs_ioc_ref {
|
2019-12-06 00:06:51 +03:00
|
|
|
#ifdef __FreeBSD__
|
|
|
|
ZFS_IOC_BASE = 0,
|
|
|
|
#else
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
ZFS_IOC_BASE = ('Z' << 8),
|
2019-12-06 00:06:51 +03:00
|
|
|
#endif
|
|
|
|
ZFS_IOC_PLATFORM_BASE = ZFS_IOC_BASE + 0x80,
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Canonical reference check of /dev/zfs ioctl numbers.
|
|
|
|
* These cannot change and new ioctl numbers must be appended.
|
|
|
|
*/
|
2020-06-15 21:30:37 +03:00
|
|
|
static boolean_t
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
validate_ioc_values(void)
|
|
|
|
{
|
2019-09-03 22:44:08 +03:00
|
|
|
boolean_t result = B_TRUE;
|
2019-08-22 19:44:11 +03:00
|
|
|
|
|
|
|
#define CHECK(expr) do { \
|
|
|
|
if (!(expr)) { \
|
2019-09-03 22:44:08 +03:00
|
|
|
result = B_FALSE; \
|
2019-08-22 19:44:11 +03:00
|
|
|
fprintf(stderr, "(%s) === FALSE\n", #expr); \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
CHECK(ZFS_IOC_BASE + 0 == ZFS_IOC_POOL_CREATE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 1 == ZFS_IOC_POOL_DESTROY);
|
|
|
|
CHECK(ZFS_IOC_BASE + 2 == ZFS_IOC_POOL_IMPORT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 3 == ZFS_IOC_POOL_EXPORT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 4 == ZFS_IOC_POOL_CONFIGS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 5 == ZFS_IOC_POOL_STATS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 6 == ZFS_IOC_POOL_TRYIMPORT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 7 == ZFS_IOC_POOL_SCAN);
|
|
|
|
CHECK(ZFS_IOC_BASE + 8 == ZFS_IOC_POOL_FREEZE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 9 == ZFS_IOC_POOL_UPGRADE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 10 == ZFS_IOC_POOL_GET_HISTORY);
|
|
|
|
CHECK(ZFS_IOC_BASE + 11 == ZFS_IOC_VDEV_ADD);
|
|
|
|
CHECK(ZFS_IOC_BASE + 12 == ZFS_IOC_VDEV_REMOVE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 13 == ZFS_IOC_VDEV_SET_STATE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 14 == ZFS_IOC_VDEV_ATTACH);
|
|
|
|
CHECK(ZFS_IOC_BASE + 15 == ZFS_IOC_VDEV_DETACH);
|
|
|
|
CHECK(ZFS_IOC_BASE + 16 == ZFS_IOC_VDEV_SETPATH);
|
|
|
|
CHECK(ZFS_IOC_BASE + 17 == ZFS_IOC_VDEV_SETFRU);
|
|
|
|
CHECK(ZFS_IOC_BASE + 18 == ZFS_IOC_OBJSET_STATS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 19 == ZFS_IOC_OBJSET_ZPLPROPS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 20 == ZFS_IOC_DATASET_LIST_NEXT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 21 == ZFS_IOC_SNAPSHOT_LIST_NEXT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 22 == ZFS_IOC_SET_PROP);
|
|
|
|
CHECK(ZFS_IOC_BASE + 23 == ZFS_IOC_CREATE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 24 == ZFS_IOC_DESTROY);
|
|
|
|
CHECK(ZFS_IOC_BASE + 25 == ZFS_IOC_ROLLBACK);
|
|
|
|
CHECK(ZFS_IOC_BASE + 26 == ZFS_IOC_RENAME);
|
|
|
|
CHECK(ZFS_IOC_BASE + 27 == ZFS_IOC_RECV);
|
|
|
|
CHECK(ZFS_IOC_BASE + 28 == ZFS_IOC_SEND);
|
|
|
|
CHECK(ZFS_IOC_BASE + 29 == ZFS_IOC_INJECT_FAULT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 30 == ZFS_IOC_CLEAR_FAULT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 31 == ZFS_IOC_INJECT_LIST_NEXT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 32 == ZFS_IOC_ERROR_LOG);
|
|
|
|
CHECK(ZFS_IOC_BASE + 33 == ZFS_IOC_CLEAR);
|
|
|
|
CHECK(ZFS_IOC_BASE + 34 == ZFS_IOC_PROMOTE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 35 == ZFS_IOC_SNAPSHOT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 36 == ZFS_IOC_DSOBJ_TO_DSNAME);
|
|
|
|
CHECK(ZFS_IOC_BASE + 37 == ZFS_IOC_OBJ_TO_PATH);
|
|
|
|
CHECK(ZFS_IOC_BASE + 38 == ZFS_IOC_POOL_SET_PROPS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 39 == ZFS_IOC_POOL_GET_PROPS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 40 == ZFS_IOC_SET_FSACL);
|
|
|
|
CHECK(ZFS_IOC_BASE + 41 == ZFS_IOC_GET_FSACL);
|
|
|
|
CHECK(ZFS_IOC_BASE + 42 == ZFS_IOC_SHARE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 43 == ZFS_IOC_INHERIT_PROP);
|
|
|
|
CHECK(ZFS_IOC_BASE + 44 == ZFS_IOC_SMB_ACL);
|
|
|
|
CHECK(ZFS_IOC_BASE + 45 == ZFS_IOC_USERSPACE_ONE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 46 == ZFS_IOC_USERSPACE_MANY);
|
|
|
|
CHECK(ZFS_IOC_BASE + 47 == ZFS_IOC_USERSPACE_UPGRADE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 48 == ZFS_IOC_HOLD);
|
|
|
|
CHECK(ZFS_IOC_BASE + 49 == ZFS_IOC_RELEASE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 50 == ZFS_IOC_GET_HOLDS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 51 == ZFS_IOC_OBJSET_RECVD_PROPS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 52 == ZFS_IOC_VDEV_SPLIT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 53 == ZFS_IOC_NEXT_OBJ);
|
|
|
|
CHECK(ZFS_IOC_BASE + 54 == ZFS_IOC_DIFF);
|
|
|
|
CHECK(ZFS_IOC_BASE + 55 == ZFS_IOC_TMP_SNAPSHOT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 56 == ZFS_IOC_OBJ_TO_STATS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 57 == ZFS_IOC_SPACE_WRITTEN);
|
|
|
|
CHECK(ZFS_IOC_BASE + 58 == ZFS_IOC_SPACE_SNAPS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 59 == ZFS_IOC_DESTROY_SNAPS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 60 == ZFS_IOC_POOL_REGUID);
|
|
|
|
CHECK(ZFS_IOC_BASE + 61 == ZFS_IOC_POOL_REOPEN);
|
|
|
|
CHECK(ZFS_IOC_BASE + 62 == ZFS_IOC_SEND_PROGRESS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 63 == ZFS_IOC_LOG_HISTORY);
|
|
|
|
CHECK(ZFS_IOC_BASE + 64 == ZFS_IOC_SEND_NEW);
|
|
|
|
CHECK(ZFS_IOC_BASE + 65 == ZFS_IOC_SEND_SPACE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 66 == ZFS_IOC_CLONE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 67 == ZFS_IOC_BOOKMARK);
|
|
|
|
CHECK(ZFS_IOC_BASE + 68 == ZFS_IOC_GET_BOOKMARKS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 69 == ZFS_IOC_DESTROY_BOOKMARKS);
|
|
|
|
CHECK(ZFS_IOC_BASE + 70 == ZFS_IOC_RECV_NEW);
|
|
|
|
CHECK(ZFS_IOC_BASE + 71 == ZFS_IOC_POOL_SYNC);
|
|
|
|
CHECK(ZFS_IOC_BASE + 72 == ZFS_IOC_CHANNEL_PROGRAM);
|
|
|
|
CHECK(ZFS_IOC_BASE + 73 == ZFS_IOC_LOAD_KEY);
|
|
|
|
CHECK(ZFS_IOC_BASE + 74 == ZFS_IOC_UNLOAD_KEY);
|
|
|
|
CHECK(ZFS_IOC_BASE + 75 == ZFS_IOC_CHANGE_KEY);
|
|
|
|
CHECK(ZFS_IOC_BASE + 76 == ZFS_IOC_REMAP);
|
|
|
|
CHECK(ZFS_IOC_BASE + 77 == ZFS_IOC_POOL_CHECKPOINT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 78 == ZFS_IOC_POOL_DISCARD_CHECKPOINT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 79 == ZFS_IOC_POOL_INITIALIZE);
|
|
|
|
CHECK(ZFS_IOC_BASE + 80 == ZFS_IOC_POOL_TRIM);
|
|
|
|
CHECK(ZFS_IOC_BASE + 81 == ZFS_IOC_REDACT);
|
|
|
|
CHECK(ZFS_IOC_BASE + 82 == ZFS_IOC_GET_BOOKMARK_PROPS);
|
Add subcommand to wait for background zfs activity to complete
Currently the best way to wait for the completion of a long-running
operation in a pool, like a scrub or device removal, is to poll 'zpool
status' and parse its output, which is neither efficient nor convenient.
This change adds a 'wait' subcommand to the zpool command. When invoked,
'zpool wait' will block until a specified type of background activity
completes. Currently, this subcommand can wait for any of the following:
- Scrubs or resilvers to complete
- Devices to initialized
- Devices to be replaced
- Devices to be removed
- Checkpoints to be discarded
- Background freeing to complete
For example, a scrub that is in progress could be waited for by running
zpool wait -t scrub <pool>
This also adds a -w flag to the attach, checkpoint, initialize, replace,
remove, and scrub subcommands. When used, this flag makes the operations
kicked off by these subcommands synchronous instead of asynchronous.
This functionality is implemented using a new ioctl. The type of
activity to wait for is provided as input to the ioctl, and the ioctl
blocks until all activity of that type has completed. An ioctl was used
over other methods of kernel-userspace communiction primarily for the
sake of portability.
Porting Notes:
This is ported from Delphix OS change DLPX-44432. The following changes
were made while porting:
- Added ZoL-style ioctl input declaration.
- Reorganized error handling in zpool_initialize in libzfs to integrate
better with changes made for TRIM support.
- Fixed check for whether a checkpoint discard is in progress.
Previously it also waited if the pool had a checkpoint, instead of
just if a checkpoint was being discarded.
- Exposed zfs_initialize_chunk_size as a ZoL-style tunable.
- Updated more existing tests to make use of new 'zpool wait'
functionality, tests that don't exist in Delphix OS.
- Used existing ZoL tunable zfs_scan_suspend_progress, together with
zinject, in place of a new tunable zfs_scan_max_blks_per_txg.
- Added support for a non-integral interval argument to zpool wait.
Future work:
ZoL has support for trimming devices, which Delphix OS does not. In the
future, 'zpool wait' could be extended to add the ability to wait for
trim operations to complete.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes #9162
2019-09-14 04:09:06 +03:00
|
|
|
CHECK(ZFS_IOC_BASE + 83 == ZFS_IOC_WAIT);
|
2020-04-01 20:02:06 +03:00
|
|
|
CHECK(ZFS_IOC_BASE + 84 == ZFS_IOC_WAIT_FS);
|
2019-12-06 00:06:51 +03:00
|
|
|
CHECK(ZFS_IOC_PLATFORM_BASE + 1 == ZFS_IOC_EVENTS_NEXT);
|
|
|
|
CHECK(ZFS_IOC_PLATFORM_BASE + 2 == ZFS_IOC_EVENTS_CLEAR);
|
|
|
|
CHECK(ZFS_IOC_PLATFORM_BASE + 3 == ZFS_IOC_EVENTS_SEEK);
|
|
|
|
CHECK(ZFS_IOC_PLATFORM_BASE + 4 == ZFS_IOC_NEXTBOOT);
|
|
|
|
CHECK(ZFS_IOC_PLATFORM_BASE + 5 == ZFS_IOC_JAIL);
|
|
|
|
CHECK(ZFS_IOC_PLATFORM_BASE + 6 == ZFS_IOC_UNJAIL);
|
2020-05-07 19:36:33 +03:00
|
|
|
CHECK(ZFS_IOC_PLATFORM_BASE + 7 == ZFS_IOC_SET_BOOTENV);
|
|
|
|
CHECK(ZFS_IOC_PLATFORM_BASE + 8 == ZFS_IOC_GET_BOOTENV);
|
2019-08-22 19:44:11 +03:00
|
|
|
|
|
|
|
#undef CHECK
|
|
|
|
|
|
|
|
return (result);
|
Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 22:14:01 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
main(int argc, const char *argv[])
|
|
|
|
{
|
|
|
|
if (argc != 2) {
|
|
|
|
(void) fprintf(stderr, "usage: %s <pool>\n", argv[0]);
|
|
|
|
exit(2);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!validate_ioc_values()) {
|
|
|
|
(void) fprintf(stderr, "WARNING: zfs_ioc_t has binary "
|
|
|
|
"incompatible command values\n");
|
|
|
|
exit(3);
|
|
|
|
}
|
|
|
|
|
|
|
|
(void) libzfs_core_init();
|
|
|
|
zfs_fd = open(ZFS_DEV, O_RDWR);
|
|
|
|
if (zfs_fd < 0) {
|
|
|
|
(void) fprintf(stderr, "open: %s\n", strerror(errno));
|
|
|
|
libzfs_core_fini();
|
|
|
|
exit(2);
|
|
|
|
}
|
|
|
|
|
|
|
|
zfs_ioc_input_tests(argv[1]);
|
|
|
|
|
|
|
|
(void) close(zfs_fd);
|
|
|
|
libzfs_core_fini();
|
|
|
|
|
|
|
|
return (unexpected_failures);
|
|
|
|
}
|