c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2025-07-28 18:47:39 +03:00
Code Issues Packages Projects Releases Wiki Activity
d96635a5c7
mirror_zfs/config/kernel-blk-queue-max-hw-sectors.m4

24 lines
699 B
Plaintext
Raw Normal View History

Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 17:15:45 +04:00
dnl #
dnl # 2.6.34 API change
dnl # blk_queue_max_hw_sectors() replaces blk_queue_max_sectors().
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_HW_SECTORS], [
ZFS_LINUX_TEST_SRC([blk_queue_max_hw_sectors], [
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 17:15:45 +04:00
#include <linux/blkdev.h>
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
], [
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 17:15:45 +04:00
struct request_queue *q = NULL;
(void) blk_queue_max_hw_sectors(q, BLK_SAFE_MAX_SECTORS);
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
], [$NO_UNUSED_BUT_SET_VARIABLE])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS], [
AC_MSG_CHECKING([whether blk_queue_max_hw_sectors() is available])
ZFS_LINUX_TEST_RESULT([blk_queue_max_hw_sectors], [
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 17:15:45 +04:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_MAX_HW_SECTORS, 1,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 22:50:34 +03:00
[blk_queue_max_hw_sectors() is available])
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 17:15:45 +04:00
],[
AC_MSG_RESULT(no)
])
])
Reference in New Issue Copy Permalink