c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-17 18:11:00 +03:00
Code Issues Packages Projects Releases Wiki Activity
d6c6590c5d
mirror_zfs/include/sys/trace_arc.h

365 lines
12 KiB
C
Raw Normal View History

Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
#include <sys/list.h>
#if defined(_KERNEL) && defined(HAVE_DECLARE_EVENT_CLASS)
#undef TRACE_SYSTEM
#define TRACE_SYSTEM zfs
Fix build failure with Linux 4.1 and FTRACE Signed-off-by: Frédéric VANNIÈRE <f.vanniere@planet-work.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3546
2015-07-28 15:42:14 +03:00
#undef TRACE_SYSTEM_VAR
#define TRACE_SYSTEM_VAR zfs_arc
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
#if !defined(_TRACE_ARC_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_ARC_H
#include <linux/tracepoint.h>
#include <sys/types.h>
OpenZFS 6531 - Provide mechanism to artificially limit disk performance Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Dan McDonald <danmcd@omniti.com> Ported by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6531 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/97e8130 Porting notes: - Added new IO delay tracepoints, and moved common ZIO tracepoint macros to a new trace_common.h file. - Used zio_delay_taskq() in place of OpenZFS's timeout_generic() function. - Updated zinject man page - Updated zpool_scrub test files
2016-05-23 20:41:29 +03:00
#include <sys/trace_common.h> /* For ZIO macros */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
/*
* Generic support for one argument tracepoints of the form:
*
* DTRACE_PROBE1(...,
* arc_buf_hdr_t *, ...);
*/
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* BEGIN CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DECLARE_EVENT_CLASS(zfs_arc_buf_hdr_class,
TP_PROTO(arc_buf_hdr_t *ab),
TP_ARGS(ab),
TP_STRUCT__entry(
__array(uint64_t, hdr_dva_word, 2)
__field(uint64_t, hdr_birth)
__field(uint32_t, hdr_flags)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
__field(uint32_t, hdr_bufcnt)
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__field(arc_buf_contents_t, hdr_type)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
__field(uint16_t, hdr_psize)
__field(uint16_t, hdr_lsize)
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__field(uint64_t, hdr_spa)
__field(arc_state_type_t, hdr_state_type)
__field(clock_t, hdr_access)
__field(uint32_t, hdr_mru_hits)
__field(uint32_t, hdr_mru_ghost_hits)
__field(uint32_t, hdr_mfu_hits)
__field(uint32_t, hdr_mfu_ghost_hits)
__field(uint32_t, hdr_l2_hits)
__field(int64_t, hdr_refcount)
),
TP_fast_assign(
__entry->hdr_dva_word[0] = ab->b_dva.dva_word[0];
__entry->hdr_dva_word[1] = ab->b_dva.dva_word[1];
__entry->hdr_birth = ab->b_birth;
__entry->hdr_flags = ab->b_flags;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
__entry->hdr_bufcnt = ab->b_l1hdr.b_bufcnt;
__entry->hdr_psize = ab->b_psize;
__entry->hdr_lsize = ab->b_lsize;
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__entry->hdr_spa = ab->b_spa;
Illumos 5408 - managing ZFS cache devices requires lots of RAM 5408 managing ZFS cache devices requires lots of RAM Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Don Brady <dev.fs.zfs@gmail.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Approved by: Garrett D'Amore <garrett@damore.org> Porting notes: Due to the restructuring of the ARC-related structures, this patch conflicts with at least the following existing ZoL commits: 6e1d7276c94cbd7c2e19f9232f6ba4bafa62dbe0 Fix inaccurate arcstat_l2_hdr_size calculations The ARC_SPACE_HDRS constant no longer exists and has been somewhat equivalently replaced by HDR_L2ONLY_SIZE. e0b0ca983d6897bcddf05af2c0e5d01ff66f90db Add visibility in to cached dbufs The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr struct requires additional structure member names to be used when referencing the inner items. Also, the presence of L1 or L2 inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR macros. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-30 06:12:23 +03:00
__entry->hdr_state_type = ab->b_l1hdr.b_state->arcs_state;
__entry->hdr_access = ab->b_l1hdr.b_arc_access;
__entry->hdr_mru_hits = ab->b_l1hdr.b_mru_hits;
__entry->hdr_mru_ghost_hits = ab->b_l1hdr.b_mru_ghost_hits;
__entry->hdr_mfu_hits = ab->b_l1hdr.b_mfu_hits;
__entry->hdr_mfu_ghost_hits = ab->b_l1hdr.b_mfu_ghost_hits;
__entry->hdr_l2_hits = ab->b_l1hdr.b_l2_hits;
__entry->hdr_refcount = ab->b_l1hdr.b_refcnt.rc_count;
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
),
Illumos 5408 - managing ZFS cache devices requires lots of RAM 5408 managing ZFS cache devices requires lots of RAM Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Don Brady <dev.fs.zfs@gmail.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Approved by: Garrett D'Amore <garrett@damore.org> Porting notes: Due to the restructuring of the ARC-related structures, this patch conflicts with at least the following existing ZoL commits: 6e1d7276c94cbd7c2e19f9232f6ba4bafa62dbe0 Fix inaccurate arcstat_l2_hdr_size calculations The ARC_SPACE_HDRS constant no longer exists and has been somewhat equivalently replaced by HDR_L2ONLY_SIZE. e0b0ca983d6897bcddf05af2c0e5d01ff66f90db Add visibility in to cached dbufs The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr struct requires additional structure member names to be used when referencing the inner items. Also, the presence of L1 or L2 inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR macros. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-30 06:12:23 +03:00
TP_printk("hdr { dva 0x%llx:0x%llx birth %llu "
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
"flags 0x%x bufcnt %u type %u psize %u lsize %u spa %llu "
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
"state_type %u access %lu mru_hits %u mru_ghost_hits %u "
"mfu_hits %u mfu_ghost_hits %u l2_hits %u refcount %lli }",
__entry->hdr_dva_word[0], __entry->hdr_dva_word[1],
Illumos 5408 - managing ZFS cache devices requires lots of RAM 5408 managing ZFS cache devices requires lots of RAM Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Don Brady <dev.fs.zfs@gmail.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Approved by: Garrett D'Amore <garrett@damore.org> Porting notes: Due to the restructuring of the ARC-related structures, this patch conflicts with at least the following existing ZoL commits: 6e1d7276c94cbd7c2e19f9232f6ba4bafa62dbe0 Fix inaccurate arcstat_l2_hdr_size calculations The ARC_SPACE_HDRS constant no longer exists and has been somewhat equivalently replaced by HDR_L2ONLY_SIZE. e0b0ca983d6897bcddf05af2c0e5d01ff66f90db Add visibility in to cached dbufs The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr struct requires additional structure member names to be used when referencing the inner items. Also, the presence of L1 or L2 inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR macros. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-30 06:12:23 +03:00
__entry->hdr_birth, __entry->hdr_flags,
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
__entry->hdr_bufcnt, __entry->hdr_type, __entry->hdr_psize,
__entry->hdr_lsize, __entry->hdr_spa, __entry->hdr_state_type,
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__entry->hdr_access, __entry->hdr_mru_hits,
__entry->hdr_mru_ghost_hits, __entry->hdr_mfu_hits,
__entry->hdr_mfu_ghost_hits, __entry->hdr_l2_hits,
__entry->hdr_refcount)
);
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* BEGIN CSTYLED */
Fix build-it compilation regression Accidentally introduced by 4ea3f86. The BEGIN CSTYLE block cannot appear half way through a continued #define. Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5643 Closes #5644
2017-01-24 19:50:15 +03:00
#define DEFINE_ARC_BUF_HDR_EVENT(name) \
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_EVENT(zfs_arc_buf_hdr_class, name, \
TP_PROTO(arc_buf_hdr_t *ab), \
TP_ARGS(ab))
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__hit);
DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__evict);
DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__delete);
DEFINE_ARC_BUF_HDR_EVENT(zfs_new_state__mru);
DEFINE_ARC_BUF_HDR_EVENT(zfs_new_state__mfu);
Illumos 5987 - zfs prefetch code needs work 5987 zfs prefetch code needs work Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Approved by: Gordon Ross <gordon.ross@nexenta.com> References: https://www.illumos.org/issues/5987 zfs prefetch code needs work illumos/illumos-gate@cf6106c 5987 zfs prefetch code needs work Porting notes: - [module/zfs/dbuf.c] - 5f6d0b6 Handle block pointers with a corrupt logical size - [module/zfs/dmu_zfetch.c] - c65aa5b Fix gcc missing parenthesis warnings - 428870f Update core ZFS code from build 121 to build 141. - 79c76d5 Change KM_PUSHPAGE -> KM_SLEEP - b8d06fc Switch KM_SLEEP to KM_PUSHPAGE - Account for ISO C90 - mixed declarations and code - warnings - Module parameters (new/changed): - Replaced zfetch_block_cap with zfetch_max_distance (Max bytes to prefetch per stream (default 8MB; 8 * 1024 * 1024)) - Preserved zfs_prefetch_disable as 'int' for consistency with existing Linux module options. - [include/sys/trace_arc.h] - Added new tracepoints - DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__sync__wait__for__async); - DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__demand__hit__predictive__prefetch); - [man/man5/zfs-module-parameters.5] - Updated man page Ported-by: kernelOfTruth kerneloftruth@gmail.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-12-27 00:10:31 +03:00
DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__sync__wait__for__async);
DEFINE_ARC_BUF_HDR_EVENT(zfs_arc__demand__hit__predictive__prefetch);
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_ARC_BUF_HDR_EVENT(zfs_l2arc__hit);
DEFINE_ARC_BUF_HDR_EVENT(zfs_l2arc__miss);
/*
* Generic support for two argument tracepoints of the form:
*
* DTRACE_PROBE2(...,
* vdev_t *, ...,
* zio_t *, ...);
*/
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* BEGIN CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DECLARE_EVENT_CLASS(zfs_l2arc_rw_class,
TP_PROTO(vdev_t *vd, zio_t *zio),
TP_ARGS(vd, zio),
TP_STRUCT__entry(
__field(uint64_t, vdev_id)
__field(uint64_t, vdev_guid)
__field(uint64_t, vdev_state)
ZIO_TP_STRUCT_ENTRY
),
TP_fast_assign(
__entry->vdev_id = vd->vdev_id;
__entry->vdev_guid = vd->vdev_guid;
__entry->vdev_state = vd->vdev_state;
ZIO_TP_FAST_ASSIGN
),
TP_printk("vdev { id %llu guid %llu state %llu } "
ZIO_TP_PRINTK_FMT, __entry->vdev_id, __entry->vdev_guid,
__entry->vdev_state, ZIO_TP_PRINTK_ARGS)
);
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* BEGIN CSTYLED */
Fix build-it compilation regression Accidentally introduced by 4ea3f86. The BEGIN CSTYLE block cannot appear half way through a continued #define. Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5643 Closes #5644
2017-01-24 19:50:15 +03:00
#define DEFINE_L2ARC_RW_EVENT(name) \
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_EVENT(zfs_l2arc_rw_class, name, \
TP_PROTO(vdev_t *vd, zio_t *zio), \
TP_ARGS(vd, zio))
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_L2ARC_RW_EVENT(zfs_l2arc__read);
DEFINE_L2ARC_RW_EVENT(zfs_l2arc__write);
/*
* Generic support for two argument tracepoints of the form:
*
* DTRACE_PROBE2(...,
* zio_t *, ...,
* l2arc_write_callback_t *, ...);
*/
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* BEGIN CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DECLARE_EVENT_CLASS(zfs_l2arc_iodone_class,
TP_PROTO(zio_t *zio, l2arc_write_callback_t *cb),
TP_ARGS(zio, cb),
TP_STRUCT__entry(ZIO_TP_STRUCT_ENTRY),
TP_fast_assign(ZIO_TP_FAST_ASSIGN),
TP_printk(ZIO_TP_PRINTK_FMT, ZIO_TP_PRINTK_ARGS)
);
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* BEGIN CSTYLED */
Fix build-it compilation regression Accidentally introduced by 4ea3f86. The BEGIN CSTYLE block cannot appear half way through a continued #define. Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5643 Closes #5644
2017-01-24 19:50:15 +03:00
#define DEFINE_L2ARC_IODONE_EVENT(name) \
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_EVENT(zfs_l2arc_iodone_class, name, \
TP_PROTO(zio_t *zio, l2arc_write_callback_t *cb), \
TP_ARGS(zio, cb))
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_L2ARC_IODONE_EVENT(zfs_l2arc__iodone);
/*
* Generic support for four argument tracepoints of the form:
*
* DTRACE_PROBE4(...,
* arc_buf_hdr_t *, ...,
* const blkptr_t *,
* uint64_t,
* const zbookmark_phys_t *);
*/
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* BEGIN CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DECLARE_EVENT_CLASS(zfs_arc_miss_class,
TP_PROTO(arc_buf_hdr_t *hdr,
const blkptr_t *bp, uint64_t size, const zbookmark_phys_t *zb),
TP_ARGS(hdr, bp, size, zb),
TP_STRUCT__entry(
__array(uint64_t, hdr_dva_word, 2)
__field(uint64_t, hdr_birth)
__field(uint32_t, hdr_flags)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
__field(uint32_t, hdr_bufcnt)
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__field(arc_buf_contents_t, hdr_type)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
__field(uint16_t, hdr_psize)
__field(uint16_t, hdr_lsize)
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__field(uint64_t, hdr_spa)
__field(arc_state_type_t, hdr_state_type)
__field(clock_t, hdr_access)
__field(uint32_t, hdr_mru_hits)
__field(uint32_t, hdr_mru_ghost_hits)
__field(uint32_t, hdr_mfu_hits)
__field(uint32_t, hdr_mfu_ghost_hits)
__field(uint32_t, hdr_l2_hits)
__field(int64_t, hdr_refcount)
__array(uint64_t, bp_dva0, 2)
__array(uint64_t, bp_dva1, 2)
__array(uint64_t, bp_dva2, 2)
__array(uint64_t, bp_cksum, 4)
__field(uint64_t, bp_lsize)
__field(uint64_t, zb_objset)
__field(uint64_t, zb_object)
__field(int64_t, zb_level)
__field(uint64_t, zb_blkid)
),
TP_fast_assign(
__entry->hdr_dva_word[0] = hdr->b_dva.dva_word[0];
__entry->hdr_dva_word[1] = hdr->b_dva.dva_word[1];
__entry->hdr_birth = hdr->b_birth;
__entry->hdr_flags = hdr->b_flags;
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
__entry->hdr_bufcnt = hdr->b_l1hdr.b_bufcnt;
__entry->hdr_psize = hdr->b_psize;
__entry->hdr_lsize = hdr->b_lsize;
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__entry->hdr_spa = hdr->b_spa;
Illumos 5408 - managing ZFS cache devices requires lots of RAM 5408 managing ZFS cache devices requires lots of RAM Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Don Brady <dev.fs.zfs@gmail.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Approved by: Garrett D'Amore <garrett@damore.org> Porting notes: Due to the restructuring of the ARC-related structures, this patch conflicts with at least the following existing ZoL commits: 6e1d7276c94cbd7c2e19f9232f6ba4bafa62dbe0 Fix inaccurate arcstat_l2_hdr_size calculations The ARC_SPACE_HDRS constant no longer exists and has been somewhat equivalently replaced by HDR_L2ONLY_SIZE. e0b0ca983d6897bcddf05af2c0e5d01ff66f90db Add visibility in to cached dbufs The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr struct requires additional structure member names to be used when referencing the inner items. Also, the presence of L1 or L2 inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR macros. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-30 06:12:23 +03:00
__entry->hdr_state_type = hdr->b_l1hdr.b_state->arcs_state;
__entry->hdr_access = hdr->b_l1hdr.b_arc_access;
__entry->hdr_mru_hits = hdr->b_l1hdr.b_mru_hits;
__entry->hdr_mru_ghost_hits = hdr->b_l1hdr.b_mru_ghost_hits;
__entry->hdr_mfu_hits = hdr->b_l1hdr.b_mfu_hits;
__entry->hdr_mfu_ghost_hits = hdr->b_l1hdr.b_mfu_ghost_hits;
__entry->hdr_l2_hits = hdr->b_l1hdr.b_l2_hits;
__entry->hdr_refcount = hdr->b_l1hdr.b_refcnt.rc_count;
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__entry->bp_dva0[0] = bp->blk_dva[0].dva_word[0];
__entry->bp_dva0[1] = bp->blk_dva[0].dva_word[1];
__entry->bp_dva1[0] = bp->blk_dva[1].dva_word[0];
__entry->bp_dva1[1] = bp->blk_dva[1].dva_word[1];
__entry->bp_dva2[0] = bp->blk_dva[2].dva_word[0];
__entry->bp_dva2[1] = bp->blk_dva[2].dva_word[1];
__entry->bp_cksum[0] = bp->blk_cksum.zc_word[0];
__entry->bp_cksum[1] = bp->blk_cksum.zc_word[1];
__entry->bp_cksum[2] = bp->blk_cksum.zc_word[2];
__entry->bp_cksum[3] = bp->blk_cksum.zc_word[3];
__entry->bp_lsize = size;
__entry->zb_objset = zb->zb_objset;
__entry->zb_object = zb->zb_object;
__entry->zb_level = zb->zb_level;
__entry->zb_blkid = zb->zb_blkid;
),
Illumos 5408 - managing ZFS cache devices requires lots of RAM 5408 managing ZFS cache devices requires lots of RAM Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Don Brady <dev.fs.zfs@gmail.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Approved by: Garrett D'Amore <garrett@damore.org> Porting notes: Due to the restructuring of the ARC-related structures, this patch conflicts with at least the following existing ZoL commits: 6e1d7276c94cbd7c2e19f9232f6ba4bafa62dbe0 Fix inaccurate arcstat_l2_hdr_size calculations The ARC_SPACE_HDRS constant no longer exists and has been somewhat equivalently replaced by HDR_L2ONLY_SIZE. e0b0ca983d6897bcddf05af2c0e5d01ff66f90db Add visibility in to cached dbufs The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr struct requires additional structure member names to be used when referencing the inner items. Also, the presence of L1 or L2 inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR macros. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-30 06:12:23 +03:00
TP_printk("hdr { dva 0x%llx:0x%llx birth %llu "
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
"flags 0x%x bufcnt %u psize %u lsize %u spa %llu state_type %u "
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
"access %lu mru_hits %u mru_ghost_hits %u mfu_hits %u "
"mfu_ghost_hits %u l2_hits %u refcount %lli } "
"bp { dva0 0x%llx:0x%llx dva1 0x%llx:0x%llx dva2 "
"0x%llx:0x%llx cksum 0x%llx:0x%llx:0x%llx:0x%llx "
"lsize %llu } zb { objset %llu object %llu level %lli "
"blkid %llu }",
__entry->hdr_dva_word[0], __entry->hdr_dva_word[1],
Illumos 5408 - managing ZFS cache devices requires lots of RAM 5408 managing ZFS cache devices requires lots of RAM Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Don Brady <dev.fs.zfs@gmail.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Approved by: Garrett D'Amore <garrett@damore.org> Porting notes: Due to the restructuring of the ARC-related structures, this patch conflicts with at least the following existing ZoL commits: 6e1d7276c94cbd7c2e19f9232f6ba4bafa62dbe0 Fix inaccurate arcstat_l2_hdr_size calculations The ARC_SPACE_HDRS constant no longer exists and has been somewhat equivalently replaced by HDR_L2ONLY_SIZE. e0b0ca983d6897bcddf05af2c0e5d01ff66f90db Add visibility in to cached dbufs The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr struct requires additional structure member names to be used when referencing the inner items. Also, the presence of L1 or L2 inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR macros. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-30 06:12:23 +03:00
__entry->hdr_birth, __entry->hdr_flags,
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 07:04:53 +03:00
__entry->hdr_bufcnt, __entry->hdr_psize, __entry->hdr_lsize,
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__entry->hdr_spa, __entry->hdr_state_type, __entry->hdr_access,
__entry->hdr_mru_hits, __entry->hdr_mru_ghost_hits,
__entry->hdr_mfu_hits, __entry->hdr_mfu_ghost_hits,
__entry->hdr_l2_hits, __entry->hdr_refcount,
__entry->bp_dva0[0], __entry->bp_dva0[1],
__entry->bp_dva1[0], __entry->bp_dva1[1],
__entry->bp_dva2[0], __entry->bp_dva2[1],
__entry->bp_cksum[0], __entry->bp_cksum[1],
__entry->bp_cksum[2], __entry->bp_cksum[3],
__entry->bp_lsize, __entry->zb_objset, __entry->zb_object,
__entry->zb_level, __entry->zb_blkid)
);
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* BEGIN CSTYLED */
Fix build-it compilation regression Accidentally introduced by 4ea3f86. The BEGIN CSTYLE block cannot appear half way through a continued #define. Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5643 Closes #5644
2017-01-24 19:50:15 +03:00
#define DEFINE_ARC_MISS_EVENT(name) \
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_EVENT(zfs_arc_miss_class, name, \
TP_PROTO(arc_buf_hdr_t *hdr, \
const blkptr_t *bp, uint64_t size, const zbookmark_phys_t *zb), \
TP_ARGS(hdr, bp, size, zb))
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_ARC_MISS_EVENT(zfs_arc__miss);
/*
* Generic support for four argument tracepoints of the form:
*
* DTRACE_PROBE4(...,
* l2arc_dev_t *, ...,
* list_t *, ...,
* uint64_t, ...,
* boolean_t, ...);
*/
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* BEGIN CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DECLARE_EVENT_CLASS(zfs_l2arc_evict_class,
TP_PROTO(l2arc_dev_t *dev,
list_t *buflist, uint64_t taddr, boolean_t all),
TP_ARGS(dev, buflist, taddr, all),
TP_STRUCT__entry(
__field(uint64_t, vdev_id)
__field(uint64_t, vdev_guid)
__field(uint64_t, vdev_state)
__field(uint64_t, l2ad_hand)
__field(uint64_t, l2ad_start)
__field(uint64_t, l2ad_end)
__field(boolean_t, l2ad_first)
__field(boolean_t, l2ad_writing)
__field(uint64_t, taddr)
__field(boolean_t, all)
),
TP_fast_assign(
__entry->vdev_id = dev->l2ad_vdev->vdev_id;
__entry->vdev_guid = dev->l2ad_vdev->vdev_guid;
__entry->vdev_state = dev->l2ad_vdev->vdev_state;
__entry->l2ad_hand = dev->l2ad_hand;
__entry->l2ad_start = dev->l2ad_start;
__entry->l2ad_end = dev->l2ad_end;
__entry->l2ad_first = dev->l2ad_first;
__entry->l2ad_writing = dev->l2ad_writing;
__entry->taddr = taddr;
__entry->all = all;
),
TP_printk("l2ad { vdev { id %llu guid %llu state %llu } "
Remove l2ad_evict from zfs_l2arc_evict_class Illumos 5701 (zpool list reports incorrect "alloc" value for cache devices) removed l2ad_evict from l2arc_dev_t. It should also be removed from the zfs_l2arc_evict_class event class. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3534
2015-06-27 06:15:27 +03:00
"hand %llu start %llu end %llu "
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
"first %d writing %d } taddr %llu all %d",
__entry->vdev_id, __entry->vdev_guid, __entry->vdev_state,
__entry->l2ad_hand, __entry->l2ad_start,
Remove l2ad_evict from zfs_l2arc_evict_class Illumos 5701 (zpool list reports incorrect "alloc" value for cache devices) removed l2ad_evict from l2arc_dev_t. It should also be removed from the zfs_l2arc_evict_class event class. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3534
2015-06-27 06:15:27 +03:00
__entry->l2ad_end, __entry->l2ad_first, __entry->l2ad_writing,
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
__entry->taddr, __entry->all)
);
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* BEGIN CSTYLED */
Fix build-it compilation regression Accidentally introduced by 4ea3f86. The BEGIN CSTYLE block cannot appear half way through a continued #define. Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5643 Closes #5644
2017-01-24 19:50:15 +03:00
#define DEFINE_L2ARC_EVICT_EVENT(name) \
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_EVENT(zfs_l2arc_evict_class, name, \
TP_PROTO(l2arc_dev_t *dev, \
list_t *buflist, uint64_t taddr, boolean_t all), \
TP_ARGS(dev, buflist, taddr, all))
codebase style improvements for OpenZFS 6459 port
2017-01-21 00:17:55 +03:00
/* END CSTYLED */
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 05:07:39 +03:00
DEFINE_L2ARC_EVICT_EVENT(zfs_l2arc__evict);
#endif /* _TRACE_ARC_H */
#undef TRACE_INCLUDE_PATH
#undef TRACE_INCLUDE_FILE
#define TRACE_INCLUDE_PATH sys
#define TRACE_INCLUDE_FILE trace_arc
#include <trace/define_trace.h>
#endif /* _KERNEL && HAVE_DECLARE_EVENT_CLASS */
Reference in New Issue Copy Permalink