mirror_zfs/module/zfs/vdev_cache.c

437 lines
12 KiB
C
Raw Normal View History

2008-11-20 23:01:55 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
2009-02-18 23:51:31 +03:00
* Copyright 2009 Sun Microsystems, Inc. All rights reserved.
2008-11-20 23:01:55 +03:00
* Use is subject to license terms.
*/
/*
* Copyright (c) 2013, 2016 by Delphix. All rights reserved.
*/
2008-11-20 23:01:55 +03:00
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/vdev_impl.h>
#include <sys/zio.h>
#include <sys/kstat.h>
#include <sys/abd.h>
2008-11-20 23:01:55 +03:00
/*
* Virtual device read-ahead caching.
*
* This file implements a simple LRU read-ahead cache. When the DMU reads
* a given block, it will often want other, nearby blocks soon thereafter.
* We take advantage of this by reading a larger disk region and caching
* the result. In the best case, this can turn 128 back-to-back 512-byte
* reads into a single 64k read followed by 127 cache hits; this reduces
* latency dramatically. In the worst case, it can turn an isolated 512-byte
* read into a 64k read, which doesn't affect latency all that much but is
* terribly wasteful of bandwidth. A more intelligent version of the cache
* could keep track of access patterns and not do read-ahead unless it sees
* at least two temporally close I/Os to the same region. Currently, only
* metadata I/O is inflated. A further enhancement could take advantage of
2008-11-20 23:01:55 +03:00
* more semantic information about the I/O. And it could use something
* faster than an AVL tree; that was chosen solely for convenience.
*
* There are five cache operations: allocate, fill, read, write, evict.
*
* (1) Allocate. This reserves a cache entry for the specified region.
* We separate the allocate and fill operations so that multiple threads
* don't generate I/O for the same cache miss.
*
* (2) Fill. When the I/O for a cache miss completes, the fill routine
* places the data in the previously allocated cache entry.
*
* (3) Read. Read data from the cache.
*
* (4) Write. Update cache contents after write completion.
*
* (5) Evict. When allocating a new entry, we evict the oldest (LRU) entry
* if the total cache size exceeds zfs_vdev_cache_size.
*/
/*
* These tunables are for performance analysis.
*/
/*
* All i/os smaller than zfs_vdev_cache_max will be turned into
* 1<<zfs_vdev_cache_bshift byte reads by the vdev_cache (aka software
* track buffer). At most zfs_vdev_cache_size bytes will be kept in each
* vdev's vdev_cache.
*
* TODO: Note that with the current ZFS code, it turns out that the
* vdev cache is not helpful, and in some cases actually harmful. It
* is better if we disable this. Once some time has passed, we should
* actually remove this to simplify the code. For now we just disable
* it by setting the zfs_vdev_cache_size to zero. Note that Solaris 11
* has made these same changes.
2008-11-20 23:01:55 +03:00
*/
static int zfs_vdev_cache_max = 1 << 14; /* 16KB */
static int zfs_vdev_cache_size = 0;
static int zfs_vdev_cache_bshift = 16;
2008-11-20 23:01:55 +03:00
#define VCBS (1 << zfs_vdev_cache_bshift) /* 64KB */
static kstat_t *vdc_ksp = NULL;
2008-11-20 23:01:55 +03:00
typedef struct vdc_stats {
kstat_named_t vdc_stat_delegations;
kstat_named_t vdc_stat_hits;
kstat_named_t vdc_stat_misses;
} vdc_stats_t;
static vdc_stats_t vdc_stats = {
{ "delegations", KSTAT_DATA_UINT64 },
{ "hits", KSTAT_DATA_UINT64 },
{ "misses", KSTAT_DATA_UINT64 }
};
#define VDCSTAT_BUMP(stat) atomic_inc_64(&vdc_stats.stat.value.ui64);
2008-11-20 23:01:55 +03:00
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
static inline int
2008-11-20 23:01:55 +03:00
vdev_cache_offset_compare(const void *a1, const void *a2)
{
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
const vdev_cache_entry_t *ve1 = (const vdev_cache_entry_t *)a1;
const vdev_cache_entry_t *ve2 = (const vdev_cache_entry_t *)a2;
2008-11-20 23:01:55 +03:00
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 20:36:03 +03:00
return (TREE_CMP(ve1->ve_offset, ve2->ve_offset));
2008-11-20 23:01:55 +03:00
}
static int
vdev_cache_lastused_compare(const void *a1, const void *a2)
{
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
const vdev_cache_entry_t *ve1 = (const vdev_cache_entry_t *)a1;
const vdev_cache_entry_t *ve2 = (const vdev_cache_entry_t *)a2;
2008-11-20 23:01:55 +03:00
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 20:36:03 +03:00
int cmp = TREE_CMP(ve1->ve_lastused, ve2->ve_lastused);
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
if (likely(cmp))
return (cmp);
2008-11-20 23:01:55 +03:00
/*
* Among equally old entries, sort by offset to ensure uniqueness.
*/
return (vdev_cache_offset_compare(a1, a2));
}
/*
* Evict the specified entry from the cache.
*/
static void
vdev_cache_evict(vdev_cache_t *vc, vdev_cache_entry_t *ve)
{
ASSERT(MUTEX_HELD(&vc->vc_lock));
ASSERT3P(ve->ve_fill_io, ==, NULL);
ASSERT3P(ve->ve_abd, !=, NULL);
2008-11-20 23:01:55 +03:00
avl_remove(&vc->vc_lastused_tree, ve);
avl_remove(&vc->vc_offset_tree, ve);
abd_free(ve->ve_abd);
2008-11-20 23:01:55 +03:00
kmem_free(ve, sizeof (vdev_cache_entry_t));
}
/*
* Allocate an entry in the cache. At the point we don't have the data,
* we're just creating a placeholder so that multiple threads don't all
* go off and read the same blocks.
*/
static vdev_cache_entry_t *
vdev_cache_allocate(zio_t *zio)
{
vdev_cache_t *vc = &zio->io_vd->vdev_cache;
uint64_t offset = P2ALIGN(zio->io_offset, VCBS);
vdev_cache_entry_t *ve;
ASSERT(MUTEX_HELD(&vc->vc_lock));
if (zfs_vdev_cache_size == 0)
return (NULL);
/*
* If adding a new entry would exceed the cache size,
* evict the oldest entry (LRU).
*/
if ((avl_numnodes(&vc->vc_lastused_tree) << zfs_vdev_cache_bshift) >
zfs_vdev_cache_size) {
ve = avl_first(&vc->vc_lastused_tree);
if (ve->ve_fill_io != NULL)
2008-11-20 23:01:55 +03:00
return (NULL);
ASSERT3U(ve->ve_hits, !=, 0);
2008-11-20 23:01:55 +03:00
vdev_cache_evict(vc, ve);
}
ve = kmem_zalloc(sizeof (vdev_cache_entry_t), KM_SLEEP);
2008-11-20 23:01:55 +03:00
ve->ve_offset = offset;
ve->ve_lastused = ddi_get_lbolt();
ve->ve_abd = abd_alloc_for_io(VCBS, B_TRUE);
2008-11-20 23:01:55 +03:00
avl_add(&vc->vc_offset_tree, ve);
avl_add(&vc->vc_lastused_tree, ve);
return (ve);
}
static void
vdev_cache_hit(vdev_cache_t *vc, vdev_cache_entry_t *ve, zio_t *zio)
{
uint64_t cache_phase = P2PHASE(zio->io_offset, VCBS);
ASSERT(MUTEX_HELD(&vc->vc_lock));
ASSERT3P(ve->ve_fill_io, ==, NULL);
2008-11-20 23:01:55 +03:00
if (ve->ve_lastused != ddi_get_lbolt()) {
2008-11-20 23:01:55 +03:00
avl_remove(&vc->vc_lastused_tree, ve);
ve->ve_lastused = ddi_get_lbolt();
2008-11-20 23:01:55 +03:00
avl_add(&vc->vc_lastused_tree, ve);
}
ve->ve_hits++;
abd_copy_off(zio->io_abd, ve->ve_abd, 0, cache_phase, zio->io_size);
2008-11-20 23:01:55 +03:00
}
/*
* Fill a previously allocated cache entry with data.
*/
static void
2009-02-18 23:51:31 +03:00
vdev_cache_fill(zio_t *fio)
2008-11-20 23:01:55 +03:00
{
2009-02-18 23:51:31 +03:00
vdev_t *vd = fio->io_vd;
2008-11-20 23:01:55 +03:00
vdev_cache_t *vc = &vd->vdev_cache;
2009-02-18 23:51:31 +03:00
vdev_cache_entry_t *ve = fio->io_private;
zio_t *pio;
2008-11-20 23:01:55 +03:00
ASSERT3U(fio->io_size, ==, VCBS);
2008-11-20 23:01:55 +03:00
/*
* Add data to the cache.
*/
mutex_enter(&vc->vc_lock);
ASSERT3P(ve->ve_fill_io, ==, fio);
ASSERT3U(ve->ve_offset, ==, fio->io_offset);
ASSERT3P(ve->ve_abd, ==, fio->io_abd);
2008-11-20 23:01:55 +03:00
ve->ve_fill_io = NULL;
/*
* Even if this cache line was invalidated by a missed write update,
* any reads that were queued up before the missed update are still
* valid, so we can satisfy them from this line before we evict it.
*/
zio_link_t *zl = NULL;
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 03:59:18 +03:00
while ((pio = zio_walk_parents(fio, &zl)) != NULL)
2009-02-18 23:51:31 +03:00
vdev_cache_hit(vc, ve, pio);
2008-11-20 23:01:55 +03:00
2009-02-18 23:51:31 +03:00
if (fio->io_error || ve->ve_missed_update)
2008-11-20 23:01:55 +03:00
vdev_cache_evict(vc, ve);
mutex_exit(&vc->vc_lock);
}
/*
* Read data from the cache. Returns B_TRUE cache hit, B_FALSE on miss.
2008-11-20 23:01:55 +03:00
*/
boolean_t
2008-11-20 23:01:55 +03:00
vdev_cache_read(zio_t *zio)
{
vdev_cache_t *vc = &zio->io_vd->vdev_cache;
vdev_cache_entry_t *ve, ve_search;
2008-11-20 23:01:55 +03:00
uint64_t cache_offset = P2ALIGN(zio->io_offset, VCBS);
zio_t *fio;
uint64_t cache_phase __maybe_unused = P2PHASE(zio->io_offset, VCBS);
2008-11-20 23:01:55 +03:00
ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);
2008-11-20 23:01:55 +03:00
if (zfs_vdev_cache_size == 0)
return (B_FALSE);
2008-11-20 23:01:55 +03:00
if (zio->io_flags & ZIO_FLAG_DONT_CACHE)
return (B_FALSE);
2008-11-20 23:01:55 +03:00
if (zio->io_size > zfs_vdev_cache_max)
return (B_FALSE);
2008-11-20 23:01:55 +03:00
/*
* If the I/O straddles two or more cache blocks, don't cache it.
*/
if (P2BOUNDARY(zio->io_offset, zio->io_size, VCBS))
return (B_FALSE);
2008-11-20 23:01:55 +03:00
ASSERT3U(cache_phase + zio->io_size, <=, VCBS);
2008-11-20 23:01:55 +03:00
mutex_enter(&vc->vc_lock);
ve_search.ve_offset = cache_offset;
ve = avl_find(&vc->vc_offset_tree, &ve_search, NULL);
2008-11-20 23:01:55 +03:00
if (ve != NULL) {
if (ve->ve_missed_update) {
mutex_exit(&vc->vc_lock);
return (B_FALSE);
2008-11-20 23:01:55 +03:00
}
if ((fio = ve->ve_fill_io) != NULL) {
zio_vdev_io_bypass(zio);
2009-02-18 23:51:31 +03:00
zio_add_child(zio, fio);
2008-11-20 23:01:55 +03:00
mutex_exit(&vc->vc_lock);
VDCSTAT_BUMP(vdc_stat_delegations);
return (B_TRUE);
2008-11-20 23:01:55 +03:00
}
vdev_cache_hit(vc, ve, zio);
zio_vdev_io_bypass(zio);
mutex_exit(&vc->vc_lock);
VDCSTAT_BUMP(vdc_stat_hits);
return (B_TRUE);
2008-11-20 23:01:55 +03:00
}
ve = vdev_cache_allocate(zio);
if (ve == NULL) {
mutex_exit(&vc->vc_lock);
return (B_FALSE);
2008-11-20 23:01:55 +03:00
}
fio = zio_vdev_delegated_io(zio->io_vd, cache_offset,
ve->ve_abd, VCBS, ZIO_TYPE_READ, ZIO_PRIORITY_NOW,
ZIO_FLAG_DONT_CACHE, vdev_cache_fill, ve);
2008-11-20 23:01:55 +03:00
ve->ve_fill_io = fio;
zio_vdev_io_bypass(zio);
2009-02-18 23:51:31 +03:00
zio_add_child(zio, fio);
2008-11-20 23:01:55 +03:00
mutex_exit(&vc->vc_lock);
zio_nowait(fio);
VDCSTAT_BUMP(vdc_stat_misses);
return (B_TRUE);
2008-11-20 23:01:55 +03:00
}
/*
* Update cache contents upon write completion.
*/
void
vdev_cache_write(zio_t *zio)
{
vdev_cache_t *vc = &zio->io_vd->vdev_cache;
vdev_cache_entry_t *ve, ve_search;
uint64_t io_start = zio->io_offset;
uint64_t io_end = io_start + zio->io_size;
uint64_t min_offset = P2ALIGN(io_start, VCBS);
uint64_t max_offset = P2ROUNDUP(io_end, VCBS);
avl_index_t where;
ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE);
2008-11-20 23:01:55 +03:00
mutex_enter(&vc->vc_lock);
ve_search.ve_offset = min_offset;
ve = avl_find(&vc->vc_offset_tree, &ve_search, &where);
if (ve == NULL)
ve = avl_nearest(&vc->vc_offset_tree, where, AVL_AFTER);
while (ve != NULL && ve->ve_offset < max_offset) {
uint64_t start = MAX(ve->ve_offset, io_start);
uint64_t end = MIN(ve->ve_offset + VCBS, io_end);
if (ve->ve_fill_io != NULL) {
ve->ve_missed_update = 1;
} else {
abd_copy_off(ve->ve_abd, zio->io_abd,
start - ve->ve_offset, start - io_start,
end - start);
2008-11-20 23:01:55 +03:00
}
ve = AVL_NEXT(&vc->vc_offset_tree, ve);
}
mutex_exit(&vc->vc_lock);
}
void
vdev_cache_purge(vdev_t *vd)
{
vdev_cache_t *vc = &vd->vdev_cache;
vdev_cache_entry_t *ve;
mutex_enter(&vc->vc_lock);
while ((ve = avl_first(&vc->vc_offset_tree)) != NULL)
vdev_cache_evict(vc, ve);
mutex_exit(&vc->vc_lock);
}
void
vdev_cache_init(vdev_t *vd)
{
vdev_cache_t *vc = &vd->vdev_cache;
mutex_init(&vc->vc_lock, NULL, MUTEX_DEFAULT, NULL);
avl_create(&vc->vc_offset_tree, vdev_cache_offset_compare,
sizeof (vdev_cache_entry_t),
offsetof(struct vdev_cache_entry, ve_offset_node));
avl_create(&vc->vc_lastused_tree, vdev_cache_lastused_compare,
sizeof (vdev_cache_entry_t),
offsetof(struct vdev_cache_entry, ve_lastused_node));
}
void
vdev_cache_fini(vdev_t *vd)
{
vdev_cache_t *vc = &vd->vdev_cache;
vdev_cache_purge(vd);
avl_destroy(&vc->vc_offset_tree);
avl_destroy(&vc->vc_lastused_tree);
mutex_destroy(&vc->vc_lock);
}
void
vdev_cache_stat_init(void)
{
vdc_ksp = kstat_create("zfs", 0, "vdev_cache_stats", "misc",
KSTAT_TYPE_NAMED, sizeof (vdc_stats) / sizeof (kstat_named_t),
KSTAT_FLAG_VIRTUAL);
if (vdc_ksp != NULL) {
vdc_ksp->ks_data = &vdc_stats;
kstat_install(vdc_ksp);
}
}
void
vdev_cache_stat_fini(void)
{
if (vdc_ksp != NULL) {
kstat_delete(vdc_ksp);
vdc_ksp = NULL;
}
}
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, cache_max, INT, ZMOD_RW,
"Inflate reads small than max");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, cache_size, INT, ZMOD_RD,
"Total size of the per-disk cache");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, cache_bshift, INT, ZMOD_RW,
"Shift size to inflate reads too");