c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-17 18:11:00 +03:00
Code Issues Packages Projects Releases Wiki Activity
c34eb6f7a1
mirror_zfs/module/os/linux/zfs/zpl_inode.c

833 lines
19 KiB
C
Raw Normal View History

Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2011, Lawrence Livermore National Security, LLC.
Linux 4.1 compat: loop device on ZFS Starting from Linux 4.1 allows iov_iter with bio_vec to be passed into iter_read/iter_write. Notably, the loop device will pass bio_vec to backend filesystem. However, current ZFS code assumes iovec without any check, so it will always crash when using loop device. With the restructured uio_t, we can safely pass bio_vec in uio_t with UIO_BVEC set. The uio* functions are modified to handle bio_vec case separately. The const uio_iov causes some warning in xuio related stuff, so explicit convert them to non const. Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3511 Closes #3640
2015-07-30 17:24:36 +03:00
* Copyright (c) 2015 by Chunwei Chen. All rights reserved.
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
*/
Linux 3.18 compat: Snapshot auto-mounting Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
2015-04-25 02:21:13 +03:00
#include <sys/zfs_ctldir.h>
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
#include <sys/zfs_vfsops.h>
#include <sys/zfs_vnops.h>
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 11:15:53 +04:00
#include <sys/zfs_znode.h>
Use spa as key besides objsetid for snapentry objsetid is not unique across pool, so using it solely as key would cause panic when automounting two snapshot on different pools with the same objsetid. We fix this by adding spa pointer as additional key. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #3948 Issue #3786 Issue #3887
2015-12-08 02:43:53 +03:00
#include <sys/dmu_objset.h>
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
#include <sys/vfs.h>
#include <sys/zpl.h>
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
#include <sys/file.h>
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
static struct dentry *
Linux 3.6 compat, iops->lookup() As of Linux commit 00cd8dd3bf95f2cc8435b4cac01d9995635c6d0b the struct nameidata is no longer passed to iops->lookup. Instead only the inamedata->flags are passed. ZFS like almost all Linux fileystems never made use of this so only the prototype needs to be wrapped for compatibility. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 18:41:06 +04:00
zpl_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
struct inode *ip;
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
znode_t *zp;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Fix casesensitivity=insensitive deadlock When casesensitivity=insensitive is set for the file system, we can deadlock in a rename if the user uses different case for each path. For example rename("A/some-file.txt", "a/some-file.txt"). The simple test for this is: 1. mkdir some-dir in a ZFS file system 2. touch some-dir/some-file.txt 3. mv Some-dir/some-file.txt some-dir/some-other-file.txt This last request deadlocks trying to relock the i_mutex on the inode for the parent directory. The solution is to use d_add_ci in zpl_lookup if we are on a file system that has the casesensitivity=insensitive attribute set. This patch checks if we are working on a case insensitive file system and if so, allocates storage for the case insensitive name and passes it to zfs_lookup and then calls d_add_ci instead of d_splice_alias. The performance impact seems to be minimal even though we have introduced a kmalloc and kfree in the lookup path. The problem was found when running Microsoft's FSCT against Samba on top of ZFS On Linux. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4136
2015-12-28 03:08:05 +03:00
pathname_t *ppn = NULL;
pathname_t pn;
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
int zfs_flags = 0;
Rename zfs_sb_t -> zfsvfs_t The use of zfs_sb_t instead of zfsvfs_t results in unnecessary conflicts with the upstream source. Change all instances of zfs_sb_t to zfsvfs_t including updating the variables names. Whenever possible the code was updated to be consistent with hope it appears in the upstream OpenZFS source. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-08 03:21:37 +03:00
zfsvfs_t *zfsvfs = dentry->d_sb->s_fs_info;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Fix off by one in zpl_lookup Doing the following command would return success with zfs creating an orphan object. touch $(for i in $(seq 256); do printf "n"; done) The funny thing is that this will only work once for each directory, because after upgraded to fzap, zfs_lookup would fail properly since it has additional length check. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5768
2017-02-11 23:42:17 +03:00
if (dlen(dentry) >= ZAP_MAXNAMELEN)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
return (ERR_PTR(-ENAMETOOLONG));
Add explicit MAXNAMELEN check It turns out that the Linux VFS doesn't strictly handle all cases where a component path name exceeds MAXNAMELEN. It does however appear to correctly handle MAXPATHLEN for us. The right way to handle this appears to be to add an explicit check to the zpl_lookup() function. Several in-tree filesystems handle this case the same way. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1279
2013-02-12 00:55:24 +04:00
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Fix casesensitivity=insensitive deadlock When casesensitivity=insensitive is set for the file system, we can deadlock in a rename if the user uses different case for each path. For example rename("A/some-file.txt", "a/some-file.txt"). The simple test for this is: 1. mkdir some-dir in a ZFS file system 2. touch some-dir/some-file.txt 3. mv Some-dir/some-file.txt some-dir/some-other-file.txt This last request deadlocks trying to relock the i_mutex on the inode for the parent directory. The solution is to use d_add_ci in zpl_lookup if we are on a file system that has the casesensitivity=insensitive attribute set. This patch checks if we are working on a case insensitive file system and if so, allocates storage for the case insensitive name and passes it to zfs_lookup and then calls d_add_ci instead of d_splice_alias. The performance impact seems to be minimal even though we have introduced a kmalloc and kfree in the lookup path. The problem was found when running Microsoft's FSCT against Samba on top of ZFS On Linux. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4136
2015-12-28 03:08:05 +03:00
/* If we are a case insensitive fs, we need the real name */
Rename zfs_sb_t -> zfsvfs_t The use of zfs_sb_t instead of zfsvfs_t results in unnecessary conflicts with the upstream source. Change all instances of zfs_sb_t to zfsvfs_t including updating the variables names. Whenever possible the code was updated to be consistent with hope it appears in the upstream OpenZFS source. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-08 03:21:37 +03:00
if (zfsvfs->z_case == ZFS_CASE_INSENSITIVE) {
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
zfs_flags = FIGNORECASE;
Add pn_alloc()/pn_free() functions In order to remove the HAVE_PN_UTILS wrappers the pn_alloc() and pn_free() functions must be implemented. The existing illumos implementation were used for this purpose. The `flags` argument which was used in places wrapped by the HAVE_PN_UTILS condition has beed added back to zfs_remove() and zfs_link() functions. This removes a small point of divergence between the ZoL code and upstream. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4522
2016-04-13 18:55:35 +03:00
pn_alloc(&pn);
Fix casesensitivity=insensitive deadlock When casesensitivity=insensitive is set for the file system, we can deadlock in a rename if the user uses different case for each path. For example rename("A/some-file.txt", "a/some-file.txt"). The simple test for this is: 1. mkdir some-dir in a ZFS file system 2. touch some-dir/some-file.txt 3. mv Some-dir/some-file.txt some-dir/some-other-file.txt This last request deadlocks trying to relock the i_mutex on the inode for the parent directory. The solution is to use d_add_ci in zpl_lookup if we are on a file system that has the casesensitivity=insensitive attribute set. This patch checks if we are working on a case insensitive file system and if so, allocates storage for the case insensitive name and passes it to zfs_lookup and then calls d_add_ci instead of d_splice_alias. The performance impact seems to be minimal even though we have introduced a kmalloc and kfree in the lookup path. The problem was found when running Microsoft's FSCT against Samba on top of ZFS On Linux. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4136
2015-12-28 03:08:05 +03:00
ppn = &pn;
}
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_lookup(ITOZ(dir), dname(dentry), &zp,
zfs_flags, cr, NULL, ppn);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
spl_fstrans_unmark(cookie);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
spin_lock(&dentry->d_lock);
dentry->d_time = jiffies;
spin_unlock(&dentry->d_lock);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
if (error) {
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
/*
* If we have a case sensitive fs, we do not want to
* insert negative entries, so return NULL for ENOENT.
* Fall through if the error is not ENOENT. Also free memory.
*/
if (ppn) {
Add pn_alloc()/pn_free() functions In order to remove the HAVE_PN_UTILS wrappers the pn_alloc() and pn_free() functions must be implemented. The existing illumos implementation were used for this purpose. The `flags` argument which was used in places wrapped by the HAVE_PN_UTILS condition has beed added back to zfs_remove() and zfs_link() functions. This removes a small point of divergence between the ZoL code and upstream. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4522
2016-04-13 18:55:35 +03:00
pn_free(ppn);
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
if (error == -ENOENT)
return (NULL);
}
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
if (error == -ENOENT)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
return (d_splice_alias(NULL, dentry));
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
return (ERR_PTR(error));
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
ip = ZTOI(zp);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Fix casesensitivity=insensitive deadlock When casesensitivity=insensitive is set for the file system, we can deadlock in a rename if the user uses different case for each path. For example rename("A/some-file.txt", "a/some-file.txt"). The simple test for this is: 1. mkdir some-dir in a ZFS file system 2. touch some-dir/some-file.txt 3. mv Some-dir/some-file.txt some-dir/some-other-file.txt This last request deadlocks trying to relock the i_mutex on the inode for the parent directory. The solution is to use d_add_ci in zpl_lookup if we are on a file system that has the casesensitivity=insensitive attribute set. This patch checks if we are working on a case insensitive file system and if so, allocates storage for the case insensitive name and passes it to zfs_lookup and then calls d_add_ci instead of d_splice_alias. The performance impact seems to be minimal even though we have introduced a kmalloc and kfree in the lookup path. The problem was found when running Microsoft's FSCT against Samba on top of ZFS On Linux. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4136
2015-12-28 03:08:05 +03:00
/*
* If we are case insensitive, call the correct function
* to install the name.
*/
if (ppn) {
struct dentry *new_dentry;
struct qstr ci_name;
Linux 4.7 compat: Fix deadlock during lookup on case-insensitive We must not use d_add_ci if the dentry already has the real name. Otherwise, d_add_ci()->d_alloc_parallel() will find itself on the lookup hash and wait on itself causing deadlock. Tested-by: satmandu Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #5124 Closes #5141 Closes #5147 Closes #5148
2016-09-23 05:09:16 +03:00
if (strcmp(dname(dentry), pn.pn_buf) == 0) {
new_dentry = d_splice_alias(ip, dentry);
} else {
ci_name.name = pn.pn_buf;
ci_name.len = strlen(pn.pn_buf);
new_dentry = d_add_ci(dentry, ip, &ci_name);
}
Add pn_alloc()/pn_free() functions In order to remove the HAVE_PN_UTILS wrappers the pn_alloc() and pn_free() functions must be implemented. The existing illumos implementation were used for this purpose. The `flags` argument which was used in places wrapped by the HAVE_PN_UTILS condition has beed added back to zfs_remove() and zfs_link() functions. This removes a small point of divergence between the ZoL code and upstream. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4522
2016-04-13 18:55:35 +03:00
pn_free(ppn);
Fix casesensitivity=insensitive deadlock When casesensitivity=insensitive is set for the file system, we can deadlock in a rename if the user uses different case for each path. For example rename("A/some-file.txt", "a/some-file.txt"). The simple test for this is: 1. mkdir some-dir in a ZFS file system 2. touch some-dir/some-file.txt 3. mv Some-dir/some-file.txt some-dir/some-other-file.txt This last request deadlocks trying to relock the i_mutex on the inode for the parent directory. The solution is to use d_add_ci in zpl_lookup if we are on a file system that has the casesensitivity=insensitive attribute set. This patch checks if we are working on a case insensitive file system and if so, allocates storage for the case insensitive name and passes it to zfs_lookup and then calls d_add_ci instead of d_splice_alias. The performance impact seems to be minimal even though we have introduced a kmalloc and kfree in the lookup path. The problem was found when running Microsoft's FSCT against Samba on top of ZFS On Linux. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4136
2015-12-28 03:08:05 +03:00
return (new_dentry);
} else {
return (d_splice_alias(ip, dentry));
}
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 11:15:53 +04:00
void
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
zpl_vap_init(vattr_t *vap, struct inode *dir, umode_t mode, cred_t *cr)
Honor setgit bit on directories Newly created files were always being created with the fsuid/fsgid in the current users credentials. This is correct except in the case when the parent directory sets the 'setgit' bit. In this case according to posix the newly created file/directory should inherit the gid of the parent directory. Additionally, in the case of a subdirectory it should also inherit the 'setgit' bit. Finally, this commit performs a little cleanup of the vattr_t initialization by moving it to a common helper function. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #262
2011-07-21 00:10:07 +04:00
{
vap->va_mask = ATTR_MODE;
vap->va_mode = mode;
Fix ACL checks for NFS kernel server This PR changes ZFS ACL checks to evaluate fsuid / fsgid rather than euid / egid to avoid accidentally granting elevated permissions to NFS clients. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Andrew Walker <awalker@ixsystems.com> Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org> Closes #13221
2022-03-18 15:47:57 +03:00
vap->va_uid = crgetuid(cr);
Honor setgit bit on directories Newly created files were always being created with the fsuid/fsgid in the current users credentials. This is correct except in the case when the parent directory sets the 'setgit' bit. In this case according to posix the newly created file/directory should inherit the gid of the parent directory. Additionally, in the case of a subdirectory it should also inherit the 'setgit' bit. Finally, this commit performs a little cleanup of the vattr_t initialization by moving it to a common helper function. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #262
2011-07-21 00:10:07 +04:00
if (dir && dir->i_mode & S_ISGID) {
Linux 3.8 compat: Support CONFIG_UIDGID_STRICT_TYPE_CHECKS When CONFIG_UIDGID_STRICT_TYPE_CHECKS is enabled uid_t/git_t are replaced by kuid_t/kgid_t, which are structures instead of integral types. This causes any code that uses an integral type to fail to build. The User Namespace functionality introduced in Linux 3.8 requires CONFIG_UIDGID_STRICT_TYPE_CHECKS, so we could not build against any kernel that supported it. We resolve this by converting between the new kuid_t/kgid_t structures and the original uid_t/gid_t types. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1589
2013-07-14 20:59:24 +04:00
vap->va_gid = KGID_TO_SGID(dir->i_gid);
Honor setgit bit on directories Newly created files were always being created with the fsuid/fsgid in the current users credentials. This is correct except in the case when the parent directory sets the 'setgit' bit. In this case according to posix the newly created file/directory should inherit the gid of the parent directory. Additionally, in the case of a subdirectory it should also inherit the 'setgit' bit. Finally, this commit performs a little cleanup of the vattr_t initialization by moving it to a common helper function. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #262
2011-07-21 00:10:07 +04:00
if (S_ISDIR(mode))
vap->va_mode |= S_ISGID;
} else {
Fix ACL checks for NFS kernel server This PR changes ZFS ACL checks to evaluate fsuid / fsgid rather than euid / egid to avoid accidentally granting elevated permissions to NFS clients. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Andrew Walker <awalker@ixsystems.com> Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org> Closes #13221
2022-03-18 15:47:57 +03:00
vap->va_gid = crgetgid(cr);
Honor setgit bit on directories Newly created files were always being created with the fsuid/fsgid in the current users credentials. This is correct except in the case when the parent directory sets the 'setgit' bit. In this case according to posix the newly created file/directory should inherit the gid of the parent directory. Additionally, in the case of a subdirectory it should also inherit the 'setgit' bit. Finally, this commit performs a little cleanup of the vattr_t initialization by moving it to a common helper function. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #262
2011-07-21 00:10:07 +04:00
}
}
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
static int
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#ifdef HAVE_IOPS_CREATE_USERNS
zpl_create(struct user_namespace *user_ns, struct inode *dir,
struct dentry *dentry, umode_t mode, bool flag)
#else
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
zpl_create(struct inode *dir, struct dentry *dentry, umode_t mode, bool flag)
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
znode_t *zp;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vattr_t *vap;
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
vap = kmem_zalloc(sizeof (vattr_t), KM_SLEEP);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vap, dir, mode, cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_create(ITOZ(dir), dname(dentry), vap, 0,
mode, &zp, cr, 0, NULL);
Directory xattr znodes hold a reference on their parent Unlike normal file or directory znodes, an xattr znode is guaranteed to only have a single parent. Therefore, we can take a refernce on that parent if it is provided at create time and cache it. Additionally, we take care to cache it on any subsequent zfs_zaccess() where the parent is provided as an optimization. This allows us to avoid needing to do a zfs_zget() when setting up the SELinux security xattr in the create path. This is critical because a hash lookup on the directory will deadlock since it is locked. The zpl_xattr_security_init() call has also been moved up to the zpl layer to ensure TXs to create the required xattrs are performed after the create TX. Otherwise we run the risk of deadlocking on the open create TX. Ideally the security xattr should be fully constructed before the new inode is unlocked. However, doing so would require far more extensive changes to ZFS. This change may also have the benefitial side effect of ensuring xattr directory znodes are evicted from the cache before normal file or directory znodes due to the extra reference. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #671
2012-11-30 04:10:03 +04:00
if (error == 0) {
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = zpl_xattr_security_init(ZTOI(zp), dir, &dentry->d_name);
Safely handle security / ACL failures The security and ACL operations should all be performed atomically. To accomplish this there would need to significant invasive changes made to the common code base. For the moment it's desirable for compatibility reasons to avoid this. Therefore the code has been updated to attempt to unwind the operation in case of failure rather than panic. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2445
2014-07-03 01:47:02 +04:00
if (error == 0)
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = zpl_init_acl(ZTOI(zp), dir);
Safely handle security / ACL failures The security and ACL operations should all be performed atomically. To accomplish this there would need to significant invasive changes made to the common code base. For the moment it's desirable for compatibility reasons to avoid this. Therefore the code has been updated to attempt to unwind the operation in case of failure rather than panic. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2445
2014-07-03 01:47:02 +04:00
zpl_inode.c: Fix SMACK interoperability SMACK needs to have the ZFS dentry security field setup before SMACK's d_instantiate() hook is called as it requires functioning '__vfs_getxattr()' calls to properly set the labels. Fxes: 1) file instantiation properly setting the object label to the subject's label 2) proper file labeling in a transmutable directory Functions Updated: 1) zpl_create() 2) zpl_mknod() 3) zpl_mkdir() 4) zpl_symlink() External-issue: https://github.com/cschaufler/smack-next/issues/1 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: TerraTech <TerraTech@users.noreply.github.com> Closes #11646 Closes #11839
2021-04-09 07:15:29 +03:00
if (error) {
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
(void) zfs_remove(ITOZ(dir), dname(dentry), cr, 0);
zpl_inode.c: Fix SMACK interoperability SMACK needs to have the ZFS dentry security field setup before SMACK's d_instantiate() hook is called as it requires functioning '__vfs_getxattr()' calls to properly set the labels. Fxes: 1) file instantiation properly setting the object label to the subject's label 2) proper file labeling in a transmutable directory Functions Updated: 1) zpl_create() 2) zpl_mknod() 3) zpl_mkdir() 4) zpl_symlink() External-issue: https://github.com/cschaufler/smack-next/issues/1 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: TerraTech <TerraTech@users.noreply.github.com> Closes #11646 Closes #11839
2021-04-09 07:15:29 +03:00
remove_inode_hash(ZTOI(zp));
iput(ZTOI(zp));
} else {
d_instantiate(dentry, ZTOI(zp));
}
Directory xattr znodes hold a reference on their parent Unlike normal file or directory znodes, an xattr znode is guaranteed to only have a single parent. Therefore, we can take a refernce on that parent if it is provided at create time and cache it. Additionally, we take care to cache it on any subsequent zfs_zaccess() where the parent is provided as an optimization. This allows us to avoid needing to do a zfs_zget() when setting up the SELinux security xattr in the create path. This is critical because a hash lookup on the directory will deadlock since it is locked. The zpl_xattr_security_init() call has also been moved up to the zpl layer to ensure TXs to create the required xattrs are performed after the create TX. Otherwise we run the risk of deadlocking on the open create TX. Ideally the security xattr should be fully constructed before the new inode is unlocked. However, doing so would require far more extensive changes to ZFS. This change may also have the benefitial side effect of ensuring xattr directory znodes are evicted from the cache before normal file or directory znodes due to the extra reference. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #671
2012-11-30 04:10:03 +04:00
}
Extend PF_FSTRANS critical regions Additional testing has shown that the region covered by PF_FSTRANS needs to be extended to cover the zpl_xattr_security_init() and init_acl() functions. The zpl_mark_dirty() function can also recurse and therefore must always be protected. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #3331
2015-04-23 20:09:19 +03:00
spl_fstrans_unmark(cookie);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
kmem_free(vap, sizeof (vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#ifdef HAVE_IOPS_MKNOD_USERNS
zpl_mknod(struct user_namespace *user_ns, struct inode *dir,
struct dentry *dentry, umode_t mode,
#else
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
zpl_mknod(struct inode *dir, struct dentry *dentry, umode_t mode,
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#endif
Linux 3.3 compat, iops->create()/mkdir()/mknod() The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #701
2012-04-30 23:01:49 +04:00
dev_t rdev)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
znode_t *zp;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vattr_t *vap;
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Don't store rdev in SA for FIFOs and sockets Update the handling of named pipes and sockets to be consistent with other platforms with regard to the rdev attribute. While all ZFS ipmlementations store the rdev for device files in a system attribute (SA), this is not the case for FIFOs and sockets. Indeed, Linux always passes rdev=0 to mknod() for FIFOs and sockets, so the value is not needed. Add an ASSERT that rdev==0 for FIFOs and sockets to detect if the expected behavior ever changes. Closes #216
2011-05-09 23:31:56 +04:00
/*
* We currently expect Linux to supply rdev=0 for all sockets
* and fifos, but we want to know if this behavior ever changes.
*/
if (S_ISSOCK(mode) || S_ISFIFO(mode))
ASSERT(rdev == 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
vap = kmem_zalloc(sizeof (vattr_t), KM_SLEEP);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vap, dir, mode, cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vap->va_rdev = rdev;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_create(ITOZ(dir), dname(dentry), vap, 0,
mode, &zp, cr, 0, NULL);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
if (error == 0) {
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = zpl_xattr_security_init(ZTOI(zp), dir, &dentry->d_name);
Safely handle security / ACL failures The security and ACL operations should all be performed atomically. To accomplish this there would need to significant invasive changes made to the common code base. For the moment it's desirable for compatibility reasons to avoid this. Therefore the code has been updated to attempt to unwind the operation in case of failure rather than panic. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2445
2014-07-03 01:47:02 +04:00
if (error == 0)
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = zpl_init_acl(ZTOI(zp), dir);
Safely handle security / ACL failures The security and ACL operations should all be performed atomically. To accomplish this there would need to significant invasive changes made to the common code base. For the moment it's desirable for compatibility reasons to avoid this. Therefore the code has been updated to attempt to unwind the operation in case of failure rather than panic. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2445
2014-07-03 01:47:02 +04:00
zpl_inode.c: Fix SMACK interoperability SMACK needs to have the ZFS dentry security field setup before SMACK's d_instantiate() hook is called as it requires functioning '__vfs_getxattr()' calls to properly set the labels. Fxes: 1) file instantiation properly setting the object label to the subject's label 2) proper file labeling in a transmutable directory Functions Updated: 1) zpl_create() 2) zpl_mknod() 3) zpl_mkdir() 4) zpl_symlink() External-issue: https://github.com/cschaufler/smack-next/issues/1 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: TerraTech <TerraTech@users.noreply.github.com> Closes #11646 Closes #11839
2021-04-09 07:15:29 +03:00
if (error) {
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
(void) zfs_remove(ITOZ(dir), dname(dentry), cr, 0);
zpl_inode.c: Fix SMACK interoperability SMACK needs to have the ZFS dentry security field setup before SMACK's d_instantiate() hook is called as it requires functioning '__vfs_getxattr()' calls to properly set the labels. Fxes: 1) file instantiation properly setting the object label to the subject's label 2) proper file labeling in a transmutable directory Functions Updated: 1) zpl_create() 2) zpl_mknod() 3) zpl_mkdir() 4) zpl_symlink() External-issue: https://github.com/cschaufler/smack-next/issues/1 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: TerraTech <TerraTech@users.noreply.github.com> Closes #11646 Closes #11839
2021-04-09 07:15:29 +03:00
remove_inode_hash(ZTOI(zp));
iput(ZTOI(zp));
} else {
d_instantiate(dentry, ZTOI(zp));
}
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
}
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
Extend PF_FSTRANS critical regions Additional testing has shown that the region covered by PF_FSTRANS needs to be extended to cover the zpl_xattr_security_init() and init_acl() functions. The zpl_mark_dirty() function can also recurse and therefore must always be protected. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #3331
2015-04-23 20:09:19 +03:00
spl_fstrans_unmark(cookie);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
kmem_free(vap, sizeof (vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
Fix zpl_mknod() return values The zpl_mknod() function was incorrectly negating its return value. This doesn't cause any problems in the success case, but it does prevent us from returning the correct error code for a failure. The implementation of this function is now consistent with all the other zpl_* functions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1717
2013-09-14 00:20:15 +04:00
return (error);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
Add support for O_TMPFILE Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on supported filesystem. It's basically doing open(2) and unlink(2) atomically. The filesystem support is added through i_op->tmpfile. We basically copy the create operation except we get rid of the link and name related stuff and add the new node to unlinked set. We also add support for linkat(2) to link tmpfile. However, since all previous file operation will skip ZIL, we force a txg_wait_synced to make sure we are sync safe. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-01-26 23:29:46 +03:00
#ifdef HAVE_TMPFILE
static int
Update tmpfile() existence detection Linux changed the tmpfile() signature again in torvalds/linux@6521f89, which in turn broke our HAVE_TMPFILE detection in configure. Update that macro to include the new case, and change the signature of zpl_tmpfile as appropriate. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rich Ercolani <rincebrain@gmail.com> Closes: #12060 Closes: #12087
2021-05-21 02:02:36 +03:00
#ifdef HAVE_TMPFILE_USERNS
zpl_tmpfile(struct user_namespace *userns, struct inode *dir,
struct dentry *dentry, umode_t mode)
#else
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
zpl_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode)
Update tmpfile() existence detection Linux changed the tmpfile() signature again in torvalds/linux@6521f89, which in turn broke our HAVE_TMPFILE detection in configure. Update that macro to include the new case, and change the signature of zpl_tmpfile as appropriate. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rich Ercolani <rincebrain@gmail.com> Closes: #12060 Closes: #12087
2021-05-21 02:02:36 +03:00
#endif
Add support for O_TMPFILE Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on supported filesystem. It's basically doing open(2) and unlink(2) atomically. The filesystem support is added through i_op->tmpfile. We basically copy the create operation except we get rid of the link and name related stuff and add the new node to unlinked set. We also add support for linkat(2) to link tmpfile. However, since all previous file operation will skip ZIL, we force a txg_wait_synced to make sure we are sync safe. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-01-26 23:29:46 +03:00
{
cred_t *cr = CRED();
struct inode *ip;
vattr_t *vap;
int error;
fstrans_cookie_t cookie;
crhold(cr);
vap = kmem_zalloc(sizeof (vattr_t), KM_SLEEP);
Don't fail to apply umask for O_TMPFILE files Apply umask to `mode` which will eventually be applied to inode. This is needed since VFS doesn't apply umask for O_TMPFILE files. (Note that zpl_init_acl() applies `ip->i_mode &= ~current_umask();` only when POSIX ACL is used.) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Closes #8997 Closes #8998
2019-12-14 02:02:23 +03:00
/*
* The VFS does not apply the umask, therefore it is applied here
* when POSIX ACLs are not enabled.
*/
if (!IS_POSIXACL(dir))
mode &= ~current_umask();
Add support for O_TMPFILE Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on supported filesystem. It's basically doing open(2) and unlink(2) atomically. The filesystem support is added through i_op->tmpfile. We basically copy the create operation except we get rid of the link and name related stuff and add the new node to unlinked set. We also add support for linkat(2) to link tmpfile. However, since all previous file operation will skip ZIL, we force a txg_wait_synced to make sure we are sync safe. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-01-26 23:29:46 +03:00
zpl_vap_init(vap, dir, mode, cr);
cookie = spl_fstrans_mark();
error = -zfs_tmpfile(dir, vap, 0, mode, &ip, cr, 0, NULL);
if (error == 0) {
/* d_tmpfile will do drop_nlink, so we should set it first */
set_nlink(ip, 1);
d_tmpfile(dentry, ip);
error = zpl_xattr_security_init(ip, dir, &dentry->d_name);
if (error == 0)
error = zpl_init_acl(ip, dir);
/*
* don't need to handle error here, file is already in
* unlinked set.
*/
}
spl_fstrans_unmark(cookie);
kmem_free(vap, sizeof (vattr_t));
crfree(cr);
ASSERT3S(error, <=, 0);
return (error);
}
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
static int
zpl_unlink(struct inode *dir, struct dentry *dentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Rename zfs_sb_t -> zfsvfs_t The use of zfs_sb_t instead of zfsvfs_t results in unnecessary conflicts with the upstream source. Change all instances of zfs_sb_t to zfsvfs_t including updating the variables names. Whenever possible the code was updated to be consistent with hope it appears in the upstream OpenZFS source. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-08 03:21:37 +03:00
zfsvfs_t *zfsvfs = dentry->d_sb->s_fs_info;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_remove(ITOZ(dir), dname(dentry), cr, 0);
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
/*
* For a CI FS we must invalidate the dentry to prevent the
* creation of negative entries.
*/
Rename zfs_sb_t -> zfsvfs_t The use of zfs_sb_t instead of zfsvfs_t results in unnecessary conflicts with the upstream source. Change all instances of zfs_sb_t to zfsvfs_t including updating the variables names. Whenever possible the code was updated to be consistent with hope it appears in the upstream OpenZFS source. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-08 03:21:37 +03:00
if (error == 0 && zfsvfs->z_case == ZFS_CASE_INSENSITIVE)
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
d_invalidate(dentry);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
spl_fstrans_unmark(cookie);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#ifdef HAVE_IOPS_MKDIR_USERNS
zpl_mkdir(struct user_namespace *user_ns, struct inode *dir,
struct dentry *dentry, umode_t mode)
#else
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
zpl_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vattr_t *vap;
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
znode_t *zp;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
vap = kmem_zalloc(sizeof (vattr_t), KM_SLEEP);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vap, dir, mode | S_IFDIR, cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_mkdir(ITOZ(dir), dname(dentry), vap, &zp, cr, 0, NULL);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
if (error == 0) {
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = zpl_xattr_security_init(ZTOI(zp), dir, &dentry->d_name);
Safely handle security / ACL failures The security and ACL operations should all be performed atomically. To accomplish this there would need to significant invasive changes made to the common code base. For the moment it's desirable for compatibility reasons to avoid this. Therefore the code has been updated to attempt to unwind the operation in case of failure rather than panic. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2445
2014-07-03 01:47:02 +04:00
if (error == 0)
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = zpl_init_acl(ZTOI(zp), dir);
Safely handle security / ACL failures The security and ACL operations should all be performed atomically. To accomplish this there would need to significant invasive changes made to the common code base. For the moment it's desirable for compatibility reasons to avoid this. Therefore the code has been updated to attempt to unwind the operation in case of failure rather than panic. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2445
2014-07-03 01:47:02 +04:00
zpl_inode.c: Fix SMACK interoperability SMACK needs to have the ZFS dentry security field setup before SMACK's d_instantiate() hook is called as it requires functioning '__vfs_getxattr()' calls to properly set the labels. Fxes: 1) file instantiation properly setting the object label to the subject's label 2) proper file labeling in a transmutable directory Functions Updated: 1) zpl_create() 2) zpl_mknod() 3) zpl_mkdir() 4) zpl_symlink() External-issue: https://github.com/cschaufler/smack-next/issues/1 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: TerraTech <TerraTech@users.noreply.github.com> Closes #11646 Closes #11839
2021-04-09 07:15:29 +03:00
if (error) {
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
(void) zfs_rmdir(ITOZ(dir), dname(dentry), NULL, cr, 0);
zpl_inode.c: Fix SMACK interoperability SMACK needs to have the ZFS dentry security field setup before SMACK's d_instantiate() hook is called as it requires functioning '__vfs_getxattr()' calls to properly set the labels. Fxes: 1) file instantiation properly setting the object label to the subject's label 2) proper file labeling in a transmutable directory Functions Updated: 1) zpl_create() 2) zpl_mknod() 3) zpl_mkdir() 4) zpl_symlink() External-issue: https://github.com/cschaufler/smack-next/issues/1 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: TerraTech <TerraTech@users.noreply.github.com> Closes #11646 Closes #11839
2021-04-09 07:15:29 +03:00
remove_inode_hash(ZTOI(zp));
iput(ZTOI(zp));
} else {
d_instantiate(dentry, ZTOI(zp));
}
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
}
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
Extend PF_FSTRANS critical regions Additional testing has shown that the region covered by PF_FSTRANS needs to be extended to cover the zpl_xattr_security_init() and init_acl() functions. The zpl_mark_dirty() function can also recurse and therefore must always be protected. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #3331
2015-04-23 20:09:19 +03:00
spl_fstrans_unmark(cookie);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
kmem_free(vap, sizeof (vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 21:46:26 +03:00
zpl_rmdir(struct inode *dir, struct dentry *dentry)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Rename zfs_sb_t -> zfsvfs_t The use of zfs_sb_t instead of zfsvfs_t results in unnecessary conflicts with the upstream source. Change all instances of zfs_sb_t to zfsvfs_t including updating the variables names. Whenever possible the code was updated to be consistent with hope it appears in the upstream OpenZFS source. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-08 03:21:37 +03:00
zfsvfs_t *zfsvfs = dentry->d_sb->s_fs_info;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_rmdir(ITOZ(dir), dname(dentry), NULL, cr, 0);
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
/*
* For a CI FS we must invalidate the dentry to prevent the
* creation of negative entries.
*/
Rename zfs_sb_t -> zfsvfs_t The use of zfs_sb_t instead of zfsvfs_t results in unnecessary conflicts with the upstream source. Change all instances of zfs_sb_t to zfsvfs_t including updating the variables names. Whenever possible the code was updated to be consistent with hope it appears in the upstream OpenZFS source. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-08 03:21:37 +03:00
if (error == 0 && zfsvfs->z_case == ZFS_CASE_INSENSITIVE)
Handling negative dentries in a CI file system. For a Case Insensitive file system we must avoid creating negative entries in the dentry cache. We must also pass the FIGNORECASE into zfs_lookup so that special files are handled correctly. We must also prevent negative dentries from being created when files are unlinked. Tested by running fsstress from LTP (10 loops, 10 processes, 10,000 ops.) Also tested with printks (now removed) to ensure that lookups come to zpl_lookup when negative should not exist. Tests: 1. ls Some-file.txt; touch some-file.txt; ls Some-file.txt and ensure no errors. 2. touch Some-file.txt; rm some-file.txt; ls Some-file.txt and ensure that the last ls shows log messages showing the lookup went all the way to zpl_lookup. Thanks to tuxoko for helping me get this correct. Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4243
2016-01-24 22:36:51 +03:00
d_invalidate(dentry);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
spl_fstrans_unmark(cookie);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#ifdef HAVE_USERNS_IOPS_GETATTR
zpl_getattr_impl(struct user_namespace *user_ns,
const struct path *path, struct kstat *stat, u32 request_mask,
unsigned int query_flags)
#else
Linux 4.11 compat: iops.getattr and friends In torvalds/linux@a528d35, there are changes to the getattr family of functions, struct kstat, and the interface of inode_operations .getattr. The inode_operations .getattr and simple_getattr() interface changed to: int (*getattr) (const struct path *, struct dentry *, struct kstat *, u32 request_mask, unsigned int query_flags) The request_mask argument indicates which field(s) the caller intends to use. Fields the caller has not specified via request_mask may be set in the returned struct anyway, but their values may be approximate. The query_flags argument indicates whether the filesystem must update the attributes from the backing store. Currently both fields are ignored. It is possible that getattr-related functions within zfs could be optimized based on the request_mask. struct kstat includes new fields: u32 result_mask; /* What fields the user got */ u64 attributes; /* See STATX_ATTR_* flags */ struct timespec btime; /* File creation time */ Fields attribute and btime are cleared; the result_mask reflects this. These appear to be optional based on simple_getattr() and vfs_getattr() within the kernel, which take the same approach. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5875
2017-03-21 03:51:16 +03:00
zpl_getattr_impl(const struct path *path, struct kstat *stat, u32 request_mask,
unsigned int query_flags)
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Linux 4.11 compat: statx support Linux 4.11 added a new statx system call that allows us to expose crtime as btime. We do this by caching crtime in the znode to match how atime, ctime and mtime are cached in the inode. statx also introduced a new way of reporting whether the immutable, append and nodump bits have been set. It adds support for reporting compression and encryption, but the semantics on other filesystems is not just to report compression/encryption, but to allow it to be turned on/off at the file level. We do not support that. We could implement semantics where we refuse to allow user modification of the bit, but we would need to do a dnode_hold() in zfs_znode_alloc() to find out encryption/compression information. That would introduce locking that will have a minor (although unmeasured) performance cost. It also would be inferior to zdb, which reports far more detailed information. We therefore omit reporting of encryption/compression through statx in favor of recommending that users interested in such information use zdb. Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #8507
2019-03-17 03:43:13 +03:00
struct inode *ip = path->dentry->d_inode;
znode_t *zp __maybe_unused = ITOZ(ip);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Linux 4.11 compat: iops.getattr and friends In torvalds/linux@a528d35, there are changes to the getattr family of functions, struct kstat, and the interface of inode_operations .getattr. The inode_operations .getattr and simple_getattr() interface changed to: int (*getattr) (const struct path *, struct dentry *, struct kstat *, u32 request_mask, unsigned int query_flags) The request_mask argument indicates which field(s) the caller intends to use. Fields the caller has not specified via request_mask may be set in the returned struct anyway, but their values may be approximate. The query_flags argument indicates whether the filesystem must update the attributes from the backing store. Currently both fields are ignored. It is possible that getattr-related functions within zfs could be optimized based on the request_mask. struct kstat includes new fields: u32 result_mask; /* What fields the user got */ u64 attributes; /* See STATX_ATTR_* flags */ struct timespec btime; /* File creation time */ Fields attribute and btime are cleared; the result_mask reflects this. These appear to be optional based on simple_getattr() and vfs_getattr() within the kernel, which take the same approach. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5875
2017-03-21 03:51:16 +03:00
/*
Linux 4.11 compat: statx support Linux 4.11 added a new statx system call that allows us to expose crtime as btime. We do this by caching crtime in the znode to match how atime, ctime and mtime are cached in the inode. statx also introduced a new way of reporting whether the immutable, append and nodump bits have been set. It adds support for reporting compression and encryption, but the semantics on other filesystems is not just to report compression/encryption, but to allow it to be turned on/off at the file level. We do not support that. We could implement semantics where we refuse to allow user modification of the bit, but we would need to do a dnode_hold() in zfs_znode_alloc() to find out encryption/compression information. That would introduce locking that will have a minor (although unmeasured) performance cost. It also would be inferior to zdb, which reports far more detailed information. We therefore omit reporting of encryption/compression through statx in favor of recommending that users interested in such information use zdb. Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #8507
2019-03-17 03:43:13 +03:00
* XXX query_flags currently ignored.
Linux 4.11 compat: iops.getattr and friends In torvalds/linux@a528d35, there are changes to the getattr family of functions, struct kstat, and the interface of inode_operations .getattr. The inode_operations .getattr and simple_getattr() interface changed to: int (*getattr) (const struct path *, struct dentry *, struct kstat *, u32 request_mask, unsigned int query_flags) The request_mask argument indicates which field(s) the caller intends to use. Fields the caller has not specified via request_mask may be set in the returned struct anyway, but their values may be approximate. The query_flags argument indicates whether the filesystem must update the attributes from the backing store. Currently both fields are ignored. It is possible that getattr-related functions within zfs could be optimized based on the request_mask. struct kstat includes new fields: u32 result_mask; /* What fields the user got */ u64 attributes; /* See STATX_ATTR_* flags */ struct timespec btime; /* File creation time */ Fields attribute and btime are cleared; the result_mask reflects this. These appear to be optional based on simple_getattr() and vfs_getattr() within the kernel, which take the same approach. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5875
2017-03-21 03:51:16 +03:00
*/
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#ifdef HAVE_USERNS_IOPS_GETATTR
Linux 4.11 compat: statx support Linux 4.11 added a new statx system call that allows us to expose crtime as btime. We do this by caching crtime in the znode to match how atime, ctime and mtime are cached in the inode. statx also introduced a new way of reporting whether the immutable, append and nodump bits have been set. It adds support for reporting compression and encryption, but the semantics on other filesystems is not just to report compression/encryption, but to allow it to be turned on/off at the file level. We do not support that. We could implement semantics where we refuse to allow user modification of the bit, but we would need to do a dnode_hold() in zfs_znode_alloc() to find out encryption/compression information. That would introduce locking that will have a minor (although unmeasured) performance cost. It also would be inferior to zdb, which reports far more detailed information. We therefore omit reporting of encryption/compression through statx in favor of recommending that users interested in such information use zdb. Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #8507
2019-03-17 03:43:13 +03:00
error = -zfs_getattr_fast(user_ns, ip, stat);
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#else
Linux 4.11 compat: statx support Linux 4.11 added a new statx system call that allows us to expose crtime as btime. We do this by caching crtime in the znode to match how atime, ctime and mtime are cached in the inode. statx also introduced a new way of reporting whether the immutable, append and nodump bits have been set. It adds support for reporting compression and encryption, but the semantics on other filesystems is not just to report compression/encryption, but to allow it to be turned on/off at the file level. We do not support that. We could implement semantics where we refuse to allow user modification of the bit, but we would need to do a dnode_hold() in zfs_znode_alloc() to find out encryption/compression information. That would introduce locking that will have a minor (although unmeasured) performance cost. It also would be inferior to zdb, which reports far more detailed information. We therefore omit reporting of encryption/compression through statx in favor of recommending that users interested in such information use zdb. Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #8507
2019-03-17 03:43:13 +03:00
error = -zfs_getattr_fast(kcred->user_ns, ip, stat);
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#endif
Linux 4.11 compat: statx support Linux 4.11 added a new statx system call that allows us to expose crtime as btime. We do this by caching crtime in the znode to match how atime, ctime and mtime are cached in the inode. statx also introduced a new way of reporting whether the immutable, append and nodump bits have been set. It adds support for reporting compression and encryption, but the semantics on other filesystems is not just to report compression/encryption, but to allow it to be turned on/off at the file level. We do not support that. We could implement semantics where we refuse to allow user modification of the bit, but we would need to do a dnode_hold() in zfs_znode_alloc() to find out encryption/compression information. That would introduce locking that will have a minor (although unmeasured) performance cost. It also would be inferior to zdb, which reports far more detailed information. We therefore omit reporting of encryption/compression through statx in favor of recommending that users interested in such information use zdb. Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #8507
2019-03-17 03:43:13 +03:00
#ifdef STATX_BTIME
if (request_mask & STATX_BTIME) {
stat->btime = zp->z_btime;
stat->result_mask |= STATX_BTIME;
}
#endif
#ifdef STATX_ATTR_IMMUTABLE
if (zp->z_pflags & ZFS_IMMUTABLE)
stat->attributes |= STATX_ATTR_IMMUTABLE;
stat->attributes_mask |= STATX_ATTR_IMMUTABLE;
#endif
#ifdef STATX_ATTR_APPEND
if (zp->z_pflags & ZFS_APPENDONLY)
stat->attributes |= STATX_ATTR_APPEND;
stat->attributes_mask |= STATX_ATTR_APPEND;
#endif
#ifdef STATX_ATTR_NODUMP
if (zp->z_pflags & ZFS_NODUMP)
stat->attributes |= STATX_ATTR_NODUMP;
stat->attributes_mask |= STATX_ATTR_NODUMP;
#endif
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
spl_fstrans_unmark(cookie);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
Linux 4.11 compat: iops.getattr and friends In torvalds/linux@a528d35, there are changes to the getattr family of functions, struct kstat, and the interface of inode_operations .getattr. The inode_operations .getattr and simple_getattr() interface changed to: int (*getattr) (const struct path *, struct dentry *, struct kstat *, u32 request_mask, unsigned int query_flags) The request_mask argument indicates which field(s) the caller intends to use. Fields the caller has not specified via request_mask may be set in the returned struct anyway, but their values may be approximate. The query_flags argument indicates whether the filesystem must update the attributes from the backing store. Currently both fields are ignored. It is possible that getattr-related functions within zfs could be optimized based on the request_mask. struct kstat includes new fields: u32 result_mask; /* What fields the user got */ u64 attributes; /* See STATX_ATTR_* flags */ struct timespec btime; /* File creation time */ Fields attribute and btime are cleared; the result_mask reflects this. These appear to be optional based on simple_getattr() and vfs_getattr() within the kernel, which take the same approach. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5875
2017-03-21 03:51:16 +03:00
ZPL_GETATTR_WRAPPER(zpl_getattr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
static int
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#ifdef HAVE_SETATTR_PREPARE_USERNS
zpl_setattr(struct user_namespace *user_ns, struct dentry *dentry,
struct iattr *ia)
#else
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
zpl_setattr(struct dentry *dentry, struct iattr *ia)
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
struct inode *ip = dentry->d_inode;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
vattr_t *vap;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
error = zpl_setattr_prepare(kcred->user_ns, dentry, ia);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
if (error)
return (error);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
vap = kmem_zalloc(sizeof (vattr_t), KM_SLEEP);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
vap->va_mask = ia->ia_valid & ATTR_IATTR_MASK;
vap->va_mode = ia->ia_mode;
Linux 3.8 compat: Support CONFIG_UIDGID_STRICT_TYPE_CHECKS When CONFIG_UIDGID_STRICT_TYPE_CHECKS is enabled uid_t/git_t are replaced by kuid_t/kgid_t, which are structures instead of integral types. This causes any code that uses an integral type to fail to build. The User Namespace functionality introduced in Linux 3.8 requires CONFIG_UIDGID_STRICT_TYPE_CHECKS, so we could not build against any kernel that supported it. We resolve this by converting between the new kuid_t/kgid_t structures and the original uid_t/gid_t types. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1589
2013-07-14 20:59:24 +04:00
vap->va_uid = KUID_TO_SUID(ia->ia_uid);
vap->va_gid = KGID_TO_SGID(ia->ia_gid);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
vap->va_size = ia->ia_size;
vap->va_atime = ia->ia_atime;
vap->va_mtime = ia->ia_mtime;
vap->va_ctime = ia->ia_ctime;
Linux 5.6 compat: timestamp_truncate() The timestamp_truncate() function was added, it replaces the existing timespec64_trunc() function. This change renames our wrapper function to be consistent with the upstream name and updates the compatibility code for older kernels accordingly. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9956 Closes #9961
2020-02-06 23:37:25 +03:00
if (vap->va_mask & ATTR_ATIME)
ip->i_atime = zpl_inode_timestamp_truncate(ia->ia_atime, ip);
Enable lazytime semantic for atime Linux 4.0 introduces lazytime. The idea is that when we update the atime, we delay writing it to disk for as long as it is reasonably possible. When lazytime is enabled, dirty_inode will be called with only I_DIRTY_TIME flag whenever i_atime is updated. So under such condition, we will set z_atime_dirty. We will only write it to disk if file is closed, inode is evicted or setattr is called. Ideally, we should also write it whenever SA is going to be updated, but it is left for future improvement. There's one thing that we should take care of now that we allow i_atime to be dirty. In original implementation, whenever SA is modified, zfs_inode_update will be called to overwrite every thing in inode. This will cause dirty i_atime to be discarded. We fix this by don't overwrite i_atime in zfs_inode_update. We only overwrite i_atime when allocating new inode or doing zfs_rezget with zfs_inode_update_new. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4482
2016-04-01 02:52:03 +03:00
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_setattr(ITOZ(ip), vap, 0, cr);
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
if (!error && (ia->ia_valid & ATTR_MODE))
error = zpl_chmod_acl(ip);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
Extend PF_FSTRANS critical regions Additional testing has shown that the region covered by PF_FSTRANS needs to be extended to cover the zpl_xattr_security_init() and init_acl() functions. The zpl_mark_dirty() function can also recurse and therefore must always be protected. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #3331
2015-04-23 20:09:19 +03:00
spl_fstrans_unmark(cookie);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
kmem_free(vap, sizeof (vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 23:24:09 +03:00
return (error);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
static int
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#ifdef HAVE_IOPS_RENAME_USERNS
zpl_rename2(struct user_namespace *user_ns, struct inode *sdip,
struct dentry *sdentry, struct inode *tdip, struct dentry *tdentry,
unsigned int flags)
#else
Linux 4.9 compat: iops->rename() wants flags In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are merged together into iops->rename(), it now wants flags. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:01 +03:00
zpl_rename2(struct inode *sdip, struct dentry *sdentry,
struct inode *tdip, struct dentry *tdentry, unsigned int flags)
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 4.9 compat: iops->rename() wants flags In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are merged together into iops->rename(), it now wants flags. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:01 +03:00
/* We don't have renameat2(2) support */
if (flags)
return (-EINVAL);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_rename(ITOZ(sdip), dname(sdentry), ITOZ(tdip),
dname(tdentry), cr, 0);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
spl_fstrans_unmark(cookie);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#if !defined(HAVE_RENAME_WANTS_FLAGS) && !defined(HAVE_IOPS_RENAME_USERNS)
Linux 4.9 compat: iops->rename() wants flags In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are merged together into iops->rename(), it now wants flags. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:01 +03:00
static int
zpl_rename(struct inode *sdip, struct dentry *sdentry,
struct inode *tdip, struct dentry *tdentry)
{
return (zpl_rename2(sdip, sdentry, tdip, tdentry, 0));
}
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
static int
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#ifdef HAVE_IOPS_SYMLINK_USERNS
zpl_symlink(struct user_namespace *user_ns, struct inode *dir,
struct dentry *dentry, const char *name)
#else
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
zpl_symlink(struct inode *dir, struct dentry *dentry, const char *name)
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
vattr_t *vap;
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
znode_t *zp;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
vap = kmem_zalloc(sizeof (vattr_t), KM_SLEEP);
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
zpl_vap_init(vap, dir, S_IFLNK | S_IRWXUGO, cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_symlink(ITOZ(dir), dname(dentry), vap,
(char *)name, &zp, cr, 0);
Fixes (extends) support for selinux xattrs to more inode types Properly initialize SELinux xattrs for all inode types. The initial implementation accidentally only did this for files. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1832
2013-11-07 01:54:54 +04:00
if (error == 0) {
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = zpl_xattr_security_init(ZTOI(zp), dir, &dentry->d_name);
zpl_inode.c: Fix SMACK interoperability SMACK needs to have the ZFS dentry security field setup before SMACK's d_instantiate() hook is called as it requires functioning '__vfs_getxattr()' calls to properly set the labels. Fxes: 1) file instantiation properly setting the object label to the subject's label 2) proper file labeling in a transmutable directory Functions Updated: 1) zpl_create() 2) zpl_mknod() 3) zpl_mkdir() 4) zpl_symlink() External-issue: https://github.com/cschaufler/smack-next/issues/1 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: TerraTech <TerraTech@users.noreply.github.com> Closes #11646 Closes #11839
2021-04-09 07:15:29 +03:00
if (error) {
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
(void) zfs_remove(ITOZ(dir), dname(dentry), cr, 0);
zpl_inode.c: Fix SMACK interoperability SMACK needs to have the ZFS dentry security field setup before SMACK's d_instantiate() hook is called as it requires functioning '__vfs_getxattr()' calls to properly set the labels. Fxes: 1) file instantiation properly setting the object label to the subject's label 2) proper file labeling in a transmutable directory Functions Updated: 1) zpl_create() 2) zpl_mknod() 3) zpl_mkdir() 4) zpl_symlink() External-issue: https://github.com/cschaufler/smack-next/issues/1 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: TerraTech <TerraTech@users.noreply.github.com> Closes #11646 Closes #11839
2021-04-09 07:15:29 +03:00
remove_inode_hash(ZTOI(zp));
iput(ZTOI(zp));
} else {
d_instantiate(dentry, ZTOI(zp));
}
Fixes (extends) support for selinux xattrs to more inode types Properly initialize SELinux xattrs for all inode types. The initial implementation accidentally only did this for files. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1832
2013-11-07 01:54:54 +04:00
}
Fix 'zfs rollback' on mounted file systems Rolling back a mounted filesystem with open file handles and cached dentries+inodes never worked properly in ZoL. The major issue was that Linux provides no easy mechanism for modules to invalidate the inode cache for a file system. Because of this it was possible that an inode from the previous filesystem would not get properly dropped from the cache during rolling back. Then a new inode with the same inode number would be create and collide with the existing cached inode. Ideally this would trigger an VERIFY() but in practice the error wasn't handled and it would just NULL reference. Luckily, this issue can be resolved by sprucing up the existing Solaris zfs_rezget() functionality for the Linux VFS. The way it works now is that when a file system is rolled back all the cached inodes will be traversed and refetched from disk. If a version of the cached inode exists on disk the in-core copy will be updated accordingly. If there is no match for that object on disk it will be unhashed from the inode cache and marked as stale. This will effectively make the inode unfindable for lookups allowing the inode number to be immediately recycled. The inode will then only be accessible from the cached dentries. Subsequent dentry lookups which reference a stale inode will result in the dentry being invalidated. Once invalidated the dentry will drop its reference on the inode allowing it to be safely pruned from the cache. Special care is taken for negative dentries since they do not reference any inode. These dentires will be invalidate based on when they were added to the dentry cache. Entries added before the last rollback will be invalidate to prevent them from masking real files in the dataset. Two nice side effects of this fix are: * Removes the dependency on spl_invalidate_inodes(), it can now be safely removed from the SPL when we choose to do so. * zfs_znode_alloc() no longer requires a dentry to be passed. This effectively reverts this portition of the code to its upstream counterpart. The dentry is not instantiated more correctly in the Linux ZPL layer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #795
2013-01-16 04:41:09 +04:00
Extend PF_FSTRANS critical regions Additional testing has shown that the region covered by PF_FSTRANS needs to be extended to cover the zpl_xattr_security_init() and init_acl() functions. The zpl_mark_dirty() function can also recurse and therefore must always be protected. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #3331
2015-04-23 20:09:19 +03:00
spl_fstrans_unmark(cookie);
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
kmem_free(vap, sizeof (vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
#if defined(HAVE_PUT_LINK_COOKIE)
static void
zpl_put_link(struct inode *unused, void *cookie)
{
kmem_free(cookie, MAXPATHLEN);
}
#elif defined(HAVE_PUT_LINK_NAMEIDATA)
static void
zpl_put_link(struct dentry *dentry, struct nameidata *nd, void *ptr)
{
const char *link = nd_get_link(nd);
if (!IS_ERR(link))
kmem_free(link, MAXPATHLEN);
}
#elif defined(HAVE_PUT_LINK_DELAYED)
static void
zpl_put_link(void *ptr)
{
kmem_free(ptr, MAXPATHLEN);
}
Linux 4.2 compat: follow_link() / put_link() As of Linux 4.2 the kernel has completely retired the nameidata structure. One of the few remaining consumers of this interface were the follow_link() and put_link() callbacks. This patch adds the required checks to configure to detect the interface change and updates the functions accordingly. Migrating to the simple_follow_link() interface was considered but was decided against ironically due to the increased complexity. It also should be noted that the kernel follow_link() and put_link() interfaces changes several times after 4.1 and but before 4.2. This means there is a narrow range of kernel commits which never appear in an official tag of the Linux kernel which ZoL will not build. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #3596
2015-07-15 20:54:26 +03:00
#endif
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
static int
zpl_get_link_common(struct dentry *dentry, struct inode *ip, char **link)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
fstrans_cookie_t cookie;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
*link = NULL;
Linux 5.10 compat: use iov_iter in uio structure As of the 5.10 kernel the generic splice compatibility code has been removed. All filesystems are now responsible for registering a ->splice_read and ->splice_write callback to support this operation. The good news is the VFS provided generic_file_splice_read() and iter_file_splice_write() callbacks can be used provided the ->iter_read and ->iter_write callback support pipes. However, this is currently not the case and only iovecs and bvecs (not pipes) are ever attached to the uio structure. This commit changes that by allowing full iov_iter structures to be attached to uios. Ever since the 4.9 kernel the iov_iter structure has supported iovecs, kvecs, bvevs, and pipes so it's desirable to pass the entire thing when possible. In conjunction with this the uio helper functions (i.e uiomove(), uiocopy(), etc) have been updated to understand the new UIO_ITER type. Note that using the kernel provided uio_iter interfaces allowed the existing Linux specific uio handling code to be simplified. When there's no longer a need to support kernel's older than 4.9, then it will be possible to remove the iovec and bvec members from the uio structure and always use a uio_iter. Until then we need to maintain all of the existing types for older kernels. Some additional refactoring and cleanup was included in this change: - Added checks to configure to detect available iov_iter interfaces. Some are available all the way back to the 3.10 kernel and are used when available. In particular, uio_prefaultpages() now always uses iov_iter_fault_in_readable() which is available for all supported kernels. - The unused UIO_USERISPACE type has been removed. It is no longer needed now that the uio_seg enum is platform specific. - Moved zfs_uio.c from the zcommon.ko module to the Linux specific platform code for the zfs.ko module. This gets it out of libzfs where it was never needed and keeps this Linux specific code out of the common sources. - Removed unnecessary O_APPEND handling from zfs_iter_write(), this is redundant and O_APPEND is already handled in zfs_write(); Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11351
2020-12-18 19:48:26 +03:00
struct iovec iov;
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
iov.iov_len = MAXPATHLEN;
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
iov.iov_base = kmem_zalloc(MAXPATHLEN, KM_SLEEP);
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
Extending FreeBSD UIO Struct In FreeBSD the struct uio was just a typedef to uio_t. In order to extend this struct, outside of the definition for the struct uio, the struct uio has been embedded inside of a uio_t struct. Also renamed all the uio_* interfaces to be zfs_uio_* to make it clear this is a ZFS interface. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Brian Atkinson <batkinson@lanl.gov> Closes #11438
2021-01-21 08:27:30 +03:00
zfs_uio_t uio;
zfs_uio_iovec_init(&uio, &iov, 1, 0, UIO_SYSSPACE, MAXPATHLEN - 1, 0);
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Use -zfs_readlink() error The zfs_readlink() function returns a Solaris positive error value and that needs to be converted to a Linux negative error value. While in this case nothing would actually go wrong, it's still incorrect and should be fixed if for no other reason than clarity.
2011-02-17 20:48:06 +03:00
error = -zfs_readlink(ip, &uio, cr);
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
spl_fstrans_unmark(cookie);
Linux 4.2 compat: follow_link() / put_link() As of Linux 4.2 the kernel has completely retired the nameidata structure. One of the few remaining consumers of this interface were the follow_link() and put_link() callbacks. This patch adds the required checks to configure to detect the interface change and updates the functions accordingly. Migrating to the simple_follow_link() interface was considered but was decided against ironically due to the increased complexity. It also should be noted that the kernel follow_link() and put_link() interfaces changes several times after 4.1 and but before 4.2. This means there is a narrow range of kernel commits which never appear in an official tag of the Linux kernel which ZoL will not build. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #3596
2015-07-15 20:54:26 +03:00
crfree(cr);
if (error)
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
kmem_free(iov.iov_base, MAXPATHLEN);
Linux 4.2 compat: follow_link() / put_link() As of Linux 4.2 the kernel has completely retired the nameidata structure. One of the few remaining consumers of this interface were the follow_link() and put_link() callbacks. This patch adds the required checks to configure to detect the interface change and updates the functions accordingly. Migrating to the simple_follow_link() interface was considered but was decided against ironically due to the increased complexity. It also should be noted that the kernel follow_link() and put_link() interfaces changes several times after 4.1 and but before 4.2. This means there is a narrow range of kernel commits which never appear in an official tag of the Linux kernel which ZoL will not build. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #3596
2015-07-15 20:54:26 +03:00
else
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
*link = iov.iov_base;
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-17 02:54:55 +03:00
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
return (error);
}
#if defined(HAVE_GET_LINK_DELAYED)
Mark functions as static Mark functions used only in the same translation unit as static. This only includes functions that do not have a prototype in a header file either. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10470
2020-06-15 21:30:37 +03:00
static const char *
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
zpl_get_link(struct dentry *dentry, struct inode *inode,
struct delayed_call *done)
{
char *link = NULL;
int error;
if (!dentry)
return (ERR_PTR(-ECHILD));
error = zpl_get_link_common(dentry, inode, &link);
Linux 4.2 compat: follow_link() / put_link() As of Linux 4.2 the kernel has completely retired the nameidata structure. One of the few remaining consumers of this interface were the follow_link() and put_link() callbacks. This patch adds the required checks to configure to detect the interface change and updates the functions accordingly. Migrating to the simple_follow_link() interface was considered but was decided against ironically due to the increased complexity. It also should be noted that the kernel follow_link() and put_link() interfaces changes several times after 4.1 and but before 4.2. This means there is a narrow range of kernel commits which never appear in an official tag of the Linux kernel which ZoL will not build. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #3596
2015-07-15 20:54:26 +03:00
if (error)
return (ERR_PTR(error));
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
set_delayed_call(done, zpl_put_link, link);
return (link);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
#elif defined(HAVE_GET_LINK_COOKIE)
Mark functions as static Mark functions used only in the same translation unit as static. This only includes functions that do not have a prototype in a header file either. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10470
2020-06-15 21:30:37 +03:00
static const char *
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
zpl_get_link(struct dentry *dentry, struct inode *inode, void **cookie)
{
char *link = NULL;
int error;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
if (!dentry)
return (ERR_PTR(-ECHILD));
error = zpl_get_link_common(dentry, inode, &link);
if (error)
return (ERR_PTR(error));
return (*cookie = link);
}
#elif defined(HAVE_FOLLOW_LINK_COOKIE)
Mark functions as static Mark functions used only in the same translation unit as static. This only includes functions that do not have a prototype in a header file either. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10470
2020-06-15 21:30:37 +03:00
static const char *
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
zpl_follow_link(struct dentry *dentry, void **cookie)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
{
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
char *link = NULL;
int error;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
error = zpl_get_link_common(dentry, dentry->d_inode, &link);
if (error)
return (ERR_PTR(error));
return (*cookie = link);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
}
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
#elif defined(HAVE_FOLLOW_LINK_NAMEIDATA)
static void *
zpl_follow_link(struct dentry *dentry, struct nameidata *nd)
Linux 4.2 compat: follow_link() / put_link() As of Linux 4.2 the kernel has completely retired the nameidata structure. One of the few remaining consumers of this interface were the follow_link() and put_link() callbacks. This patch adds the required checks to configure to detect the interface change and updates the functions accordingly. Migrating to the simple_follow_link() interface was considered but was decided against ironically due to the increased complexity. It also should be noted that the kernel follow_link() and put_link() interfaces changes several times after 4.1 and but before 4.2. This means there is a narrow range of kernel commits which never appear in an official tag of the Linux kernel which ZoL will not build. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #3596
2015-07-15 20:54:26 +03:00
{
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
char *link = NULL;
int error;
error = zpl_get_link_common(dentry, dentry->d_inode, &link);
if (error)
nd_set_link(nd, ERR_PTR(error));
else
nd_set_link(nd, link);
return (NULL);
Linux 4.2 compat: follow_link() / put_link() As of Linux 4.2 the kernel has completely retired the nameidata structure. One of the few remaining consumers of this interface were the follow_link() and put_link() callbacks. This patch adds the required checks to configure to detect the interface change and updates the functions accordingly. Migrating to the simple_follow_link() interface was considered but was decided against ironically due to the increased complexity. It also should be noted that the kernel follow_link() and put_link() interfaces changes several times after 4.1 and but before 4.2. This means there is a narrow range of kernel commits which never appear in an official tag of the Linux kernel which ZoL will not build. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #3596
2015-07-15 20:54:26 +03:00
}
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
static int
zpl_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
struct inode *ip = old_dentry->d_inode;
int error;
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
fstrans_cookie_t cookie;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
if (ip->i_nlink >= ZFS_LINK_MAX)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 23:26:11 +04:00
return (-EMLINK);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crhold(cr);
Linux 4.12 compat: CURRENT_TIME removed Linux 4.9 added current_time() as the preferred interface to get the filesystem time. CURRENT_TIME was retired in Linux 4.12. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6114
2017-05-10 19:30:48 +03:00
ip->i_ctime = current_time(ip);
Linux: always check or verify return of igrab() zhold() wraps igrab() on Linux, and igrab() may fail when the inode is in the process of being deleted. This means zhold() must only be called when a reference exists and therefore it cannot be deleted. This is the case for all existing consumers so add a VERIFY and a comment explaining this requirement. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Adam Moss <c@yotes.com> Closes #11704
2021-03-17 02:33:34 +03:00
/* Must have an existing ref, so igrab() cannot return NULL */
VERIFY3P(igrab(ip), !=, NULL);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
Mark all ZPL and ioctl functions as PF_FSTRANS Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl calls as well as the l2arc and adapt ARC threads. This obviates the need for MUTEX_FSTRANS so its previous uses and definition have been eliminated. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3225
2015-03-31 06:43:29 +03:00
cookie = spl_fstrans_mark();
Eliminate Linux specific inode usage from common code Change many of the znops routines to take a znode rather than an inode so that zfs_replay code can be largely shared and in the future the much of the znops code may be shared. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9708
2019-12-11 22:53:57 +03:00
error = -zfs_link(ITOZ(dir), ITOZ(ip), dname(dentry), cr, 0);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
if (error) {
iput(ip);
goto out;
}
d_instantiate(dentry, ip);
out:
Extend PF_FSTRANS critical regions Additional testing has shown that the region covered by PF_FSTRANS needs to be extended to cover the zpl_xattr_security_init() and init_acl() functions. The zpl_mark_dirty() function can also recurse and therefore must always be protected. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Closes #3331
2015-04-23 20:09:19 +03:00
spl_fstrans_unmark(cookie);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 21:13:41 +03:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
ASSERT3S(error, <=, 0);
return (error);
}
Partially revert 5a6ac4c Reinstate the zpl_revalidate() functionality to resolve a regression where dentries for open files during a rollback are not invalidated. The unrelated functionality for automatically unmounting .zfs/snapshots was not reverted. Nor was the addition of shrink_dcache_sb() to the zfs_resume_fs() function. This issue was not immediately caught by the CI because the test case intended to catch it was included in the list of ZTS tests which may occasionally fail for unrelated reasons. Remove all of the rollback tests from this list to help identify the frequency of any spurious failures. The rollback_003_pos.ksh test case exposes a real issue with the long standing code which needs to be investigated. Regardless, it has been enable with a small workaround in the test case itself. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Pavel Snajdr <snajpa@snajpa.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9587 Closes #9592
2019-11-19 00:05:56 +03:00
static int
#ifdef HAVE_D_REVALIDATE_NAMEIDATA
zpl_revalidate(struct dentry *dentry, struct nameidata *nd)
{
unsigned int flags = (nd ? nd->flags : 0);
#else
zpl_revalidate(struct dentry *dentry, unsigned int flags)
{
#endif /* HAVE_D_REVALIDATE_NAMEIDATA */
/* CSTYLED */
zfsvfs_t *zfsvfs = dentry->d_sb->s_fs_info;
int error;
if (flags & LOOKUP_RCU)
return (-ECHILD);
/*
* After a rollback negative dentries created before the rollback
* time must be invalidated. Otherwise they can obscure files which
* are only present in the rolled back dataset.
*/
if (dentry->d_inode == NULL) {
spin_lock(&dentry->d_lock);
error = time_before(dentry->d_time, zfsvfs->z_rollback_time);
spin_unlock(&dentry->d_lock);
if (error)
return (0);
}
/*
* The dentry may reference a stale inode if a mounted file system
* was rolled back to a point in time where the object didn't exist.
*/
if (dentry->d_inode && ITOZ(dentry->d_inode)->z_is_stale)
return (0);
return (1);
}
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
const struct inode_operations zpl_inode_operations = {
.setattr = zpl_setattr,
.getattr = zpl_getattr,
Linux 4.9 compat: remove iops->{set,get,remove}xattr In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are removed. xattr operations will directly go through sb->s_xattr. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:17 +03:00
#ifdef HAVE_GENERIC_SETXATTR
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
Linux 4.9 compat: remove iops->{set,get,remove}xattr In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are removed. xattr operations will directly go through sb->s_xattr. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:17 +03:00
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
.listxattr = zpl_xattr_list,
Honor CONFIG_FS_POSIX_ACL kernel option The required Posix ACL interfaces are only available for kernels with CONFIG_FS_POSIX_ACL defined. Therefore, only enable Posix ACL support for these kernels. All major distribution kernels enable CONFIG_FS_POSIX_ACL by default. If your kernel does not support Posix ACLs the following warning will be printed at ZFS module load time. "ZFS: Posix ACLs disabled by kernel" Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1825
2013-11-03 03:40:26 +04:00
#if defined(CONFIG_FS_POSIX_ACL)
Linux 3.14 compat: assign inode->set_acl Linux 3.14 introduces inode->set_acl(). Normally, acl modification will come from setxattr, which will handle by the acl xattr_handler, and we already handles that well. However, nfsd will directly calls inode->set_acl or return error if it doesn't exists. Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Massimo Maggi <me@massimo-maggi.eu> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #5371 Closes #5375
2016-11-09 21:37:17 +03:00
#if defined(HAVE_SET_ACL)
.set_acl = zpl_set_acl,
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
#endif /* HAVE_SET_ACL */
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
.get_acl = zpl_get_acl,
Honor CONFIG_FS_POSIX_ACL kernel option The required Posix ACL interfaces are only available for kernels with CONFIG_FS_POSIX_ACL defined. Therefore, only enable Posix ACL support for these kernels. All major distribution kernels enable CONFIG_FS_POSIX_ACL by default. If your kernel does not support Posix ACLs the following warning will be printed at ZFS module load time. "ZFS: Posix ACLs disabled by kernel" Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1825
2013-11-03 03:40:26 +04:00
#endif /* CONFIG_FS_POSIX_ACL */
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
};
const struct inode_operations zpl_dir_inode_operations = {
.create = zpl_create,
.lookup = zpl_lookup,
.link = zpl_link,
.unlink = zpl_unlink,
.symlink = zpl_symlink,
.mkdir = zpl_mkdir,
.rmdir = zpl_rmdir,
.mknod = zpl_mknod,
Linux 5.12 compat: idmapped mounts In Linux 5.12, the filesystem API was modified to support ipmapped mounts by adding a "struct user_namespace *" parameter to a number functions and VFS handlers. This change adds the needed autoconf macros to detect the new interfaces and updates the code appropriately. This change does not add support for idmapped mounts, instead it preserves the existing behavior by passing the initial user namespace where needed. A subsequent commit will be required to add support for idmapped mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org> Closes #11712
2021-03-20 07:00:59 +03:00
#if defined(HAVE_RENAME_WANTS_FLAGS) || defined(HAVE_IOPS_RENAME_USERNS)
Linux 4.9 compat: iops->rename() wants flags In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are merged together into iops->rename(), it now wants flags. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:01 +03:00
.rename = zpl_rename2,
#else
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
.rename = zpl_rename,
Add support for O_TMPFILE Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on supported filesystem. It's basically doing open(2) and unlink(2) atomically. The filesystem support is added through i_op->tmpfile. We basically copy the create operation except we get rid of the link and name related stuff and add the new node to unlinked set. We also add support for linkat(2) to link tmpfile. However, since all previous file operation will skip ZIL, we force a txg_wait_synced to make sure we are sync safe. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-01-26 23:29:46 +03:00
#endif
#ifdef HAVE_TMPFILE
.tmpfile = zpl_tmpfile,
Linux 4.9 compat: iops->rename() wants flags In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are merged together into iops->rename(), it now wants flags. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:01 +03:00
#endif
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
.setattr = zpl_setattr,
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 20:55:53 +03:00
.getattr = zpl_getattr,
Linux 4.9 compat: remove iops->{set,get,remove}xattr In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are removed. xattr operations will directly go through sb->s_xattr. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:17 +03:00
#ifdef HAVE_GENERIC_SETXATTR
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 20:55:53 +03:00
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
Linux 4.9 compat: remove iops->{set,get,remove}xattr In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are removed. xattr operations will directly go through sb->s_xattr. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:17 +03:00
#endif
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 20:55:53 +03:00
.listxattr = zpl_xattr_list,
Honor CONFIG_FS_POSIX_ACL kernel option The required Posix ACL interfaces are only available for kernels with CONFIG_FS_POSIX_ACL defined. Therefore, only enable Posix ACL support for these kernels. All major distribution kernels enable CONFIG_FS_POSIX_ACL by default. If your kernel does not support Posix ACLs the following warning will be printed at ZFS module load time. "ZFS: Posix ACLs disabled by kernel" Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1825
2013-11-03 03:40:26 +04:00
#if defined(CONFIG_FS_POSIX_ACL)
Linux 3.14 compat: assign inode->set_acl Linux 3.14 introduces inode->set_acl(). Normally, acl modification will come from setxattr, which will handle by the acl xattr_handler, and we already handles that well. However, nfsd will directly calls inode->set_acl or return error if it doesn't exists. Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Massimo Maggi <me@massimo-maggi.eu> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #5371 Closes #5375
2016-11-09 21:37:17 +03:00
#if defined(HAVE_SET_ACL)
.set_acl = zpl_set_acl,
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
#endif /* HAVE_SET_ACL */
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
.get_acl = zpl_get_acl,
Honor CONFIG_FS_POSIX_ACL kernel option The required Posix ACL interfaces are only available for kernels with CONFIG_FS_POSIX_ACL defined. Therefore, only enable Posix ACL support for these kernels. All major distribution kernels enable CONFIG_FS_POSIX_ACL by default. If your kernel does not support Posix ACLs the following warning will be printed at ZFS module load time. "ZFS: Posix ACLs disabled by kernel" Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1825
2013-11-03 03:40:26 +04:00
#endif /* CONFIG_FS_POSIX_ACL */
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
};
const struct inode_operations zpl_symlink_inode_operations = {
4.10 compat - BIO flag changes and others [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #5499
2016-12-31 01:03:59 +03:00
#ifdef HAVE_GENERIC_READLINK
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
.readlink = generic_readlink,
4.10 compat - BIO flag changes and others [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #5499
2016-12-31 01:03:59 +03:00
#endif
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
#if defined(HAVE_GET_LINK_DELAYED) || defined(HAVE_GET_LINK_COOKIE)
.get_link = zpl_get_link,
#elif defined(HAVE_FOLLOW_LINK_COOKIE) || defined(HAVE_FOLLOW_LINK_NAMEIDATA)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
.follow_link = zpl_follow_link,
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
#endif
#if defined(HAVE_PUT_LINK_COOKIE) || defined(HAVE_PUT_LINK_NAMEIDATA)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
.put_link = zpl_put_link,
Linux 4.5 compat: get_link() / put_link() The follow_link() interface was retired in favor of get_link(). In the process of phasing in get_link() the Linux kernel went through two different versions. The first of which depended on put_link() and the final version on a delayed done function. - Improved configure checks for .follow_link, .get_link, .put_link. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - Both versions .get_link are detected and supported as well two previous versions of .follow_link. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Issue #4228
2016-01-14 21:25:10 +03:00
#endif
Set mtime on symbolic links Register the setattr/getattr callbacks for symlinks. Without these the generic inode_setattr() and generic_fillattr() functions will be used. In the setattr case this will only result in the inode being updated in memory, the dirty_inode callback would also normally run but none is registered for zfs. The straight forward fix is to set the setattr/getattr callbacks for symlinks so they are handled just like files and directories. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #412
2011-10-19 01:51:03 +04:00
.setattr = zpl_setattr,
.getattr = zpl_getattr,
Linux 4.9 compat: remove iops->{set,get,remove}xattr In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are removed. xattr operations will directly go through sb->s_xattr. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:17 +03:00
#ifdef HAVE_GENERIC_SETXATTR
Allow xattrs on symlinks The Solaris version of ZFS does not allow xattrs to be set on symlinks due to the way they implemented the attropen() system call. Linux however implements xattrs through the lgetxattr() and lsetxattr() system calls which do not have this limitation. The only reason this hasn't always worked under ZFS on Linux is that the xattr handlers were not registered for symlink type inodes. This was done simply to be consistent with the Solaris behavior. Upon futher reflection I believe this should be allowed under Linux. The only ill effect would be that the xattrs on symlinks will not be visible when the pool is imported on a Solaris system. This also has the benefit that it allows for SELinux style security xattr labeling which expects to be able to set xattrs on all inode types. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #272
2011-11-29 21:05:04 +04:00
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
Linux 4.9 compat: remove iops->{set,get,remove}xattr In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are removed. xattr operations will directly go through sb->s_xattr. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:17 +03:00
#endif
Allow xattrs on symlinks The Solaris version of ZFS does not allow xattrs to be set on symlinks due to the way they implemented the attropen() system call. Linux however implements xattrs through the lgetxattr() and lsetxattr() system calls which do not have this limitation. The only reason this hasn't always worked under ZFS on Linux is that the xattr handlers were not registered for symlink type inodes. This was done simply to be consistent with the Solaris behavior. Upon futher reflection I believe this should be allowed under Linux. The only ill effect would be that the xattrs on symlinks will not be visible when the pool is imported on a Solaris system. This also has the benefit that it allows for SELinux style security xattr labeling which expects to be able to set xattrs on all inode types. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #272
2011-11-29 21:05:04 +04:00
.listxattr = zpl_xattr_list,
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
};
const struct inode_operations zpl_special_inode_operations = {
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 20:55:53 +03:00
.setattr = zpl_setattr,
.getattr = zpl_getattr,
Linux 4.9 compat: remove iops->{set,get,remove}xattr In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are removed. xattr operations will directly go through sb->s_xattr. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:17 +03:00
#ifdef HAVE_GENERIC_SETXATTR
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 20:55:53 +03:00
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
Linux 4.9 compat: remove iops->{set,get,remove}xattr In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and generic_{set,get,remove}xattr are removed. xattr operations will directly go through sb->s_xattr. Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-10-19 21:19:17 +03:00
#endif
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 20:55:53 +03:00
.listxattr = zpl_xattr_list,
Honor CONFIG_FS_POSIX_ACL kernel option The required Posix ACL interfaces are only available for kernels with CONFIG_FS_POSIX_ACL defined. Therefore, only enable Posix ACL support for these kernels. All major distribution kernels enable CONFIG_FS_POSIX_ACL by default. If your kernel does not support Posix ACLs the following warning will be printed at ZFS module load time. "ZFS: Posix ACLs disabled by kernel" Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1825
2013-11-03 03:40:26 +04:00
#if defined(CONFIG_FS_POSIX_ACL)
Linux 3.14 compat: assign inode->set_acl Linux 3.14 introduces inode->set_acl(). Normally, acl modification will come from setxattr, which will handle by the acl xattr_handler, and we already handles that well. However, nfsd will directly calls inode->set_acl or return error if it doesn't exists. Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Massimo Maggi <me@massimo-maggi.eu> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #5371 Closes #5375
2016-11-09 21:37:17 +03:00
#if defined(HAVE_SET_ACL)
.set_acl = zpl_set_acl,
Linux compat: Minimum kernel version 3.10 Increase the minimum supported kernel version from 2.6.32 to 3.10. This removes support for the following Linux enterprise distributions. Distribution | Kernel | End of Life ---------------- | ------ | ------------- Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017 SLES 11 | 3.0 | Mar 32, 2019 RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020 The following changes were made as part of removing support. * Updated `configure` to enforce a minimum kernel version as specified in the META file (Linux-Minimum: 3.10). configure: error: *** Cannot build against kernel version 2.6.32. *** The minimum supported kernel version is 3.10. * Removed all `configure` kABI checks and matching C code for interfaces which solely predate the Linux 3.10 kernel. * Updated all `configure` kABI checks to fail when an interface is missing which was in the 3.10 kernel up to the latest 5.1 kernel. Removed the HAVE_* preprocessor defines for these checks and updated the code to unconditionally use the verified interface. * Inverted the detection logic in several kABI checks to match the new interface as it appears in 3.10 and newer and not the legacy interface. * Consolidated the following checks in to individual files. Due the large number of changes in the checks it made sense to handle this now. It would be desirable to group other related checks in the same fashion, but this as left as future work. - config/kernel-blkdev.m4 - Block device kABI checks - config/kernel-blk-queue.m4 - Block queue kABI checks - config/kernel-bio.m4 - Bio interface kABI checks * Removed the kABI checks for sops->nr_cached_objects() and sops->free_cached_objects(). These interfaces are currently unused. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9566
2019-11-12 19:59:06 +03:00
#endif /* HAVE_SET_ACL */
Posix ACL Support This change adds support for Posix ACLs by storing them as an xattr which is common practice for many Linux file systems. Since the Posix ACL is stored as an xattr it will not overwrite any existing ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also be non-functional on other platforms although it may be visible as an xattr if that platform understands SA based xattrs. By default Posix ACLs are disabled but they may be enabled with the new 'aclmode=noacl|posixacl' property. Set the property to 'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added an appropriate acltype will be added. This change passes the POSIX Test Suite cleanly with the exception of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too). http://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #170
2013-10-28 20:22:15 +04:00
.get_acl = zpl_get_acl,
Honor CONFIG_FS_POSIX_ACL kernel option The required Posix ACL interfaces are only available for kernels with CONFIG_FS_POSIX_ACL defined. Therefore, only enable Posix ACL support for these kernels. All major distribution kernels enable CONFIG_FS_POSIX_ACL by default. If your kernel does not support Posix ACLs the following warning will be printed at ZFS module load time. "ZFS: Posix ACLs disabled by kernel" Signed-off-by: Massimo Maggi <me@massimo-maggi.eu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1825
2013-11-03 03:40:26 +04:00
#endif /* CONFIG_FS_POSIX_ACL */
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 23:08:24 +03:00
};
Partially revert 5a6ac4c Reinstate the zpl_revalidate() functionality to resolve a regression where dentries for open files during a rollback are not invalidated. The unrelated functionality for automatically unmounting .zfs/snapshots was not reverted. Nor was the addition of shrink_dcache_sb() to the zfs_resume_fs() function. This issue was not immediately caught by the CI because the test case intended to catch it was included in the list of ZTS tests which may occasionally fail for unrelated reasons. Remove all of the rollback tests from this list to help identify the frequency of any spurious failures. The rollback_003_pos.ksh test case exposes a real issue with the long standing code which needs to be investigated. Regardless, it has been enable with a small workaround in the test case itself. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Pavel Snajdr <snajpa@snajpa.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #9587 Closes #9592
2019-11-19 00:05:56 +03:00
dentry_operations_t zpl_dentry_operations = {
.d_revalidate = zpl_revalidate,
};
Reference in New Issue Copy Permalink